PARCC Review 1. Select the drop-down menus to correctly complete each sentence.

Size: px
Start display at page:

Download "PARCC Review 1. Select the drop-down menus to correctly complete each sentence."

Transcription

1 Name PARCC Review 1. Select the drop-down menus to correctly complete each sentence. The set of all points in a plane that are equidistant from a given point is called a The given point is called the Radius Area Center Perimeter 2. Select from the drop-down to correctly complete each sentence. Given distinct noncollinear points A, B, and C, the set of all points between A and C including A and C is 3. Which geometric figures have a measurable quantity? Select each correct answer. A. line B. angle C. point D. line segment E. ray 1

2 4. Using a compass and a straightedge, a student constructed a triangle in which XY one is one of those sides. The compass is opened to a set length and two intersecting arcs are drawn above XY using X and Y as the centers. The intersection of the two arcs is labeled as a point Z. Part A What could be the set length of the compass so that is XYZ is isosceles but not equilateral? Select all that apply A. less than ½ XY B. equal to ½ XY C. between ½ XY and XY D. equal to XY E. greater than XY Part B Select the correct phrase to complete the sentence If the opening of the compass is then XYZ will be equilateral 2

3 5. Jericho is making several constructions based on the segment shown. Part A For his fist construction, Jericho made the markings shown with a compass open to a length less than the length of segment PQ. Jericho s markings are useful for the construction of which of the figures listed? Select all that apply Part B A. a 60 angle B. a bisector of PQ C. line perpendicular to PQ D. a rhombus with PQ as one diagonal E. an equilateral triangle with side PQ The first steps of Jericho s second s construction are shown. After drawing arcs from point S and point R, he adjusted the compass length using the intersection of the arc from point S with PQ and SR. Which figure is he constructing? A. the bisector of PQ through point R B. an angle congruent to RPQ with vertex R C. a line through point R that is parallel to PQ D. a circle containing points P, Q,and R 3

4 6. Quadrilateral ABCD is shown graphed in the xy- coordinate plane. Part A Quadrilateral ABCD will be translated according to the rule (x, y) (x + 3, y 4) to form A B C D. Select the correct orientation of A B C D and place it correctly on the plane. Part B Quadrilateral ABCD maps onto A B C D. It will undergo a different transformation that will map A( 6,3) to A, B(-4,5) to B, C (-1,6) to C, and D (-3,2) to D.The transformation will consist of a reflection over the y-axis followed by a translation. Point D is shown plotted in the plane after the transformation. Plot the point A in the plane. 4

5 7. Part A Line l passes through the points ( 4, 7) and (2, 3) on the coordinate plane. Line m passes through the points ( 4, 1) and (2, w). For what value of w is line m parallel to line l? Enter your answer in the box. Part B Given the figure, write the expression that can replace t and will guarantee that lines j and k are parallel. Support your answer. 5

6 8. The diagram shows regular hexagon ABCDEF with center at O. Justine made these claims. The only lines of symmetry for regular hexagon ABCDEF are the lines that contain one vertex and O. The only angle of rotation that shows rotational is 120 Explain why Justine is correct or incorrect. Enter your explanation is the space provided. 9. Triangle JKL will undergo a transformation to create triangle J K L in the xy- coordinate plane. Which transformations will result in JKL J K L? A. (x, y) ( x, y) B. (x, y) ( x, y) C. (x, y) (x, y 5) D. (x, y) (x + 3, y 5) E. (x, y) (2x, 3y) F. (x, y) ( x, y + 3) 6

7 10. In the figure, p ǁ q. Transversals t and w intersect at point L. Part A What is the missing reason in step 3? A. Alternate interior angles along parallel lines are congruent. B. Alternate exterior angles along parallel lines are congruent. C. Corresponding angles along parallel lines are congruent D. Vertical angles are congruent Part B Consider the proof of p q given that LHK ~ LJZ. If LHK ~ LJZ, then LHK LJZ because corresponding angles in similar triangles are congruent. Which statement concludes the proof? A. If LHK LJZ then p q because when base angles are congruent, the lines are parallel. B. If LHK LJZ then p q because when corresponding angles are congruent, the lines are parallel C. If LHK LKH then p q because when alternate exterior angles are congruent, the lines are parallel D. If JLZ HLK, then p q because when corresponding angles are congruent the lines are parallel 7

8 11. Triangle ABC is shown in the xy- coordinate plane. The triangle will be translated 2 units down and 3 units right to create triangle A B C. Indicate whether each of the listed parts of the image will or will not be the same as the corresponding part in which the preimage (triangle ABC) by selecting the appropriate box in the table. 8

9 12. The right triangle in the coordinate plane is rotated 270 clockwise about the point (2, 1) and then reflected across the y axis to form triangle A B C. Draw in the appropriate orientation for triangle A B C into the correct position on the coordinate plane (sketch it). 9

10 13. Triangle ABC is graphed in the xy- coordinate plane, as shown. Part A Triangle ABC is reflected in the x- axis to form triangle A B C. What are the coordinates of C after the reflection? A. (-6, 4) B. (3, -2) C. (4, -6) D. (6, -4) Part B Triangle ABC in the xy- coordinate plane will be rotated 90 degrees counterclockwise about point A to form triangle A B C. Which graph represents A B C? 10

11 14. An incomplete proof of the theorem that the sum of the interior angles of a triangle is 180 degrees is shown. Part A What is the appropriate reason for the statement in step 1? A. Through any two points, there is exactly one line B. Though a point not on a line, there is exactly one line parallel to the given line C. If two lines cut by a transversal form congruent corresponding angle, then the lines are parallel. D. If two lines cut by a transversal form congruent alternate interior angles, then the lines are parallel. Part B Which pairs of angles congruence or equalities should be used for the statement in step 2? Indicate all such pairs. 11

12 Part C Select from the drop down menu to correctly complete the sentence. The reason for the statement in step 2 is that Part D Select from the drop down menu to correctly complete the sentence. The appropriate reason for the statement in step 5 is the 15. Octagon PQRSTVWZ is a regular octagon with its center at point C. Which transformations will map octagon PQRSTVWZ onto itself? Select each correct transformation A. reflecting over QV B. reflecting over RW C. reflecting over TZ D. rotating 45 clockwise around point Z. E. rotating 135 clockwise around point C F. rotating 90 counterclockwise around point C. 12

13 16. Part A ABC meets the given criteria The perimeter of triangle ABC is 50 units, Only two of the sides have the same length The third side is 16 units long, given in the diagram What are the coordinates of point C that will meet the criteria for triangle ABC? A. ( 6.25,8 ) B. ( 8, 6.25 ) C. ( 8, 15 ) D. ( 15, 8 ) Part B Point C is placed at (12, 16) and point B is moved along the x-axis. Triangle ABC is still an isosceles triangle and point A is still at the origin. What is the new perimeter of ABC? Provide valid mathematical reasoning and calculations to support your answer. Enter your answer, your reasoning, and your calculations in the space provided 13

14 17. Given: In ABC shown, BA BC Part A Select from the drop down menus to correctly complete step 2 of the proof. Part B Select from the drop down menus to correctly complete step 4 of the proof. Part C Select from the drop-down menus to correctly complete step 5 of the proof. because of Part D What is the correct reason for the statement in step 6? A. The transitive property of congruence B. base angles of isosceles triangles are congruent C. corresponding parts of congruent triangles are congruent D. vertical angles are congruen 14

15 18. In the diagram, quadrilaterals FBAG and CDEF are rectangles How long is DE rounded to the nearest tenth? Enter your answer in the box. 19. Triangle ABC has sides with lengths of 3, 6 and 8. Classify each of the transformations described as producing a triangle similar to triangle not similar to triangle ABC. Drag and drop each transformation into the appropriate box. 20. Point A is located at -3, and point B is located at 19. Select a point on the number line between A and B such that the distance from A to the point is 3 11 of the distance from A to B. Select a point on the number line to plot the point. 15

16 21. A computer monitor is 20 inches wide. The aspect ratio, which is the ratio of the width of the screen to the height of the screen, is 16:9. What is the length of the diagonal of the screen, to the nearest whole inch? Enter your answer in the box 22. In the xy- coordinate plane shown, line l passes through point C and has a slope of -2. Enter your answers in the boxes: A dilation of line l with center A and a scale factor of 3 will produce a new line through point C, the image of point C with coordinates (, ) and with a slope of. Hint create a line segment and dilate it. (1,0) is another point on line l. Create another triangle from on the point of dilation. 16

17 23. Triangle P is dilated from center A by a scale factor of 2 to form triangle Q. The vertici\es from triangle P are (-2,1), (2,4) and (2,1). The vertices for triangle Q are (-1,-3), (7,3) and (7,-3). Graph point A, the center of the dilation. Select the place on the coordinate plane to plot the point. 17

18 24. ABC is dilated from the center A by a factor not equal to 1 to form AKL. Which of the statements must be true? Select all that apply. A. AB and AK lie on the same line. B. The line containing BC is parallel to the line containing KL. C. ABC ACB D. ABC AKL E. ABC~ AKL F. ABC AKL 25. The diagram shows MN graphed on a coordinate plane. Point P lies on MN and is ¾ of the way from M to N. What are the coordinates of point P? 26. The figure shows line segment JK and a point P that is not collinear with points J and K. Suppose that line segment J K is the image of line segment JK after a dilation with scale factor of 0.5 that is centered a point P. Which statement best describes the position of line segment J K? A. Line segment J K is parallel to line segment JK B. Line segment J K is perpendicular to line segment JK. C. Line segment J K intersects line segment JK at one point, but is not perpendicular to line segment JK. D. Line segment J K lies on the same line as line segment JK. 18

19 27. Triangle APQ is the image of ABC under a dilation centered at vertex A with scale factor ½. Triangle RBT is the image of ABC under a dilation centered at vertex B with scale factor ¾. Which statement about ABC, APQ, and RBT is correct? A. All these triangles are similar B. None of the triangles are similar C. Triangles APQ and RBT are not similar because they were dilated using different scale factors. D. Triangles APQ and RBT are not similar because they were dilated with different centers of dilation. 28. A dilation of a center P (0, 0) and a scale factor k is applied to. MN Let M N represent the image of MN after the dilation. Select each correct statement. A. If k > 0, then M N > MN B. If k > 1, then M N > MN C. If 0 < k < 1, then M N < MN D. If 0.5 < k < 1.5, then M N < MN E. If k = 1, then M N = MN F. If k = 0.5, then M N = 0.5( MN ) 29. Given the two triangles shown, find the value of x. Select from the drop-down menu to correctly complete the sentence. The value of x is 19

20 30. Points X and Z are on a number line, and point Y partitions XZ into two parts so that the ratio of the length of XY to the length of YZ is 5:7. The coordinate of X is 1.3 and the coordinate of Y is 3.8. What is the coordinate of Z? 20

PARCC Review. The set of all points in a plane that are equidistant from a given point is called a

PARCC Review. The set of all points in a plane that are equidistant from a given point is called a Name 1. Select the drop-down menus to correctly complete each sentence. PARCC Review The set of all points in a plane that are equidistant from a given point is called a The given point is called the Radius

More information

C. ( 5, 0) D. ( 4, 1) Which statement is correct?

C. ( 5, 0) D. ( 4, 1) Which statement is correct? MAFS.912.G-SRT.1.1 1. Dilations are used to get films to fit onto a movie screen as shown below. 3. The circle shown in the coordinate plane below is the preimage under a dilation centered at the origin

More information

MAKE GEOMETRIC CONSTRUCTIONS

MAKE GEOMETRIC CONSTRUCTIONS MAKE GEOMETRIC CONSTRUCTIONS KEY IDEAS 1. To copy a segment, follow the steps given: Given: AB Construct: PQ congruent to AB 1. Use a straightedge to draw a line, l. 2. Choose a point on line l and label

More information

Honors Midterm Review

Honors Midterm Review Name: Date: 1. Draw all lines of symmetry for these shapes. 4. A windmill has eight equally-spaced blades that rotate in the clockwise direction. 2. Use the figure below to answer the question that follows.

More information

Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review

Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review Polygon a closed plane figure with at least 3 sides that are segments -the sides do not intersect except at the vertices N-gon -

More information

3. Given the similarity transformation shown below; identify the composition:

3. Given the similarity transformation shown below; identify the composition: Midterm Multiple Choice Practice 1. Based on the construction below, which statement must be true? 1 1) m ABD m CBD 2 2) m ABD m CBD 3) m ABD m ABC 1 4) m CBD m ABD 2 2. Line segment AB is shown in the

More information

UCS Geometry SEMESTER 1 REVIEW GUIDE #2 STU COPY. 1. Translate the preimage A ( 2, 1) left 4 units and down 7 units.

UCS Geometry SEMESTER 1 REVIEW GUIDE #2 STU COPY. 1. Translate the preimage A ( 2, 1) left 4 units and down 7 units. 2015-2016 UCS Geometry SEMESTER 1 REVIEW GUIDE #2 STU COPY 1. Translate the preimage A ( 2, 1) left 4 units and down 7 units. 2. Use the rule (x, y) (x 5, y + 8) to describe in words how the translation

More information

Chapter 1-3 Parallel Lines, Vocab, and Linear Equations Review

Chapter 1-3 Parallel Lines, Vocab, and Linear Equations Review Geometry H Final Exam Review Chapter 1-3 Parallel Lines, Vocab, and Linear Equations Review 1. Use the figure at the right to answer the following questions. a. How many planes are there in the figure?

More information

Chapter 1-2 Points, Lines, and Planes

Chapter 1-2 Points, Lines, and Planes Chapter 1-2 Points, Lines, and Planes Undefined Terms: A point has no size but is often represented by a dot and usually named by a capital letter.. A A line extends in two directions without ending. Lines

More information

Postulates, Theorems, and Corollaries. Chapter 1

Postulates, Theorems, and Corollaries. Chapter 1 Chapter 1 Post. 1-1-1 Through any two points there is exactly one line. Post. 1-1-2 Through any three noncollinear points there is exactly one plane containing them. Post. 1-1-3 If two points lie in a

More information

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles.

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles. Geometry Practice Name 1. Angles located next to one another sharing a common side are called angles. 2. Planes that meet to form right angles are called planes. 3. Lines that cross are called lines. 4.

More information

0613ge. Geometry Regents Exam 0613

0613ge. Geometry Regents Exam 0613 wwwjmaporg 0613ge 1 In trapezoid RSTV with bases and, diagonals and intersect at Q If trapezoid RSTV is not isosceles, which triangle is equal in area to? 2 In the diagram below, 3 In a park, two straight

More information

Geometry Semester 1 REVIEW Must show all work on the Review and Final Exam for full credit.

Geometry Semester 1 REVIEW Must show all work on the Review and Final Exam for full credit. Geometry Semester 1 REVIEW Must show all work on the Review and Final Exam for full credit. NAME UNIT 1: 1.6 Midpoint and Distance in the Coordinate Plane 1. What are the coordinates of the midpoint of

More information

2. The pentagon shown is regular. Name Geometry Semester 1 Review Guide Hints: (transformation unit)

2. The pentagon shown is regular. Name Geometry Semester 1 Review Guide Hints: (transformation unit) Name Geometry Semester 1 Review Guide 1 2014-2015 1. Jen and Beth are graphing triangles on this coordinate grid. Beth graphed her triangle as shown. Jen must now graph the reflection of Beth s triangle

More information

Name: Extra Midterm Review January 2018

Name: Extra Midterm Review January 2018 Name: Extra Midterm Review January 2018 1. Which drawing best illustrates the construction of an equilateral triangle? A) B) C) D) 2. Construct an equilateral triangle in which A is one vertex. A 3. Construct

More information

UNIT 1: SIMILARITY, CONGRUENCE, AND PROOFS

UNIT 1: SIMILARITY, CONGRUENCE, AND PROOFS UNIT 1: SIMILARITY, CONGRUENCE, AND PROOFS This unit introduces the concepts of similarity and congruence. The definition of similarity is explored through dilation transformations. The concept of scale

More information

Geometry Final Exam - Study Guide

Geometry Final Exam - Study Guide Geometry Final Exam - Study Guide 1. Solve for x. True or False? (questions 2-5) 2. All rectangles are rhombuses. 3. If a quadrilateral is a kite, then it is a parallelogram. 4. If two parallel lines are

More information

H Geo Final Review Packet Multiple Choice Identify the choice that best completes the statement or answers the question.

H Geo Final Review Packet Multiple Choice Identify the choice that best completes the statement or answers the question. H Geo Final Review Packet Multiple Choice Identif the choice that best completes the statement or answers the question. 1. Which angle measures approximatel 7?.. In the figure below, what is the name of

More information

Geometry: Semester 1 Midterm

Geometry: Semester 1 Midterm Class: Date: Geometry: Semester 1 Midterm Multiple Choice Identify the choice that best completes the statement or answers the question. 1. The first two steps for constructing MNO that is congruent to

More information

Moore Catholic High School Math Department

Moore Catholic High School Math Department Moore Catholic High School Math Department Geometry Vocabulary The following is a list of terms and properties which are necessary for success in a Geometry class. You will be tested on these terms during

More information

Unit 7. Transformations

Unit 7. Transformations Unit 7 Transformations 1 A transformation moves or changes a figure in some way to produce a new figure called an. Another name for the original figure is the. Recall that a translation moves every point

More information

PARCC Geometry Practice Test Released April,

PARCC Geometry Practice Test Released April, Non-Calculator Part 1. The figure shows with side lengths as indicated. Enter your answer in the box. 2. The figure shows two perpendicular lines s and r intersecting at point P in the interior of a trapezoid.

More information

Lesson 1. Unit 2 Practice Problems. Problem 2. Problem 1. Solution 1, 4, 5. Solution. Problem 3

Lesson 1. Unit 2 Practice Problems. Problem 2. Problem 1. Solution 1, 4, 5. Solution. Problem 3 Unit 2 Practice Problems Lesson 1 Problem 1 Rectangle measures 12 cm by 3 cm. Rectangle is a scaled copy of Rectangle. Select all of the measurement pairs that could be the dimensions of Rectangle. 1.

More information

Chapters 7 & 8. Parallel and Perpendicular Lines/Triangles and Transformations

Chapters 7 & 8. Parallel and Perpendicular Lines/Triangles and Transformations Chapters 7 & 8 Parallel and Perpendicular Lines/Triangles and Transformations 7-2B Lines I can identify relationships of angles formed by two parallel lines cut by a transversal. 8.G.5 Symbolic Representations

More information

2-1 Transformations and Rigid Motions. ENGAGE 1 ~ Introducing Transformations REFLECT

2-1 Transformations and Rigid Motions. ENGAGE 1 ~ Introducing Transformations REFLECT 2-1 Transformations and Rigid Motions Essential question: How do you identify transformations that are rigid motions? ENGAGE 1 ~ Introducing Transformations A transformation is a function that changes

More information

Get Ready. Solving Equations 1. Solve each equation. a) 4x + 3 = 11 b) 8y 5 = 6y + 7

Get Ready. Solving Equations 1. Solve each equation. a) 4x + 3 = 11 b) 8y 5 = 6y + 7 Get Ready BLM... Solving Equations. Solve each equation. a) 4x + = 8y 5 = 6y + 7 c) z+ = z+ 5 d) d = 5 5 4. Write each equation in the form y = mx + b. a) x y + = 0 5x + y 7 = 0 c) x + 6y 8 = 0 d) 5 0

More information

Honors Midterm Review

Honors Midterm Review Name: ate: 1. raw all lines of symmetry for these shapes. 4. windmill has eight equally-spaced blades that rotate in the clockwise direction. 2. Use the figure below to answer the question that follows.

More information

Moore Catholic High School Math Department

Moore Catholic High School Math Department Moore Catholic High School Math Department Geometry Vocabulary The following is a list of terms and properties which are necessary for success in a Geometry class. You will be tested on these terms during

More information

A calculator, scrap paper, and patty paper may be used. A compass and straightedge is required.

A calculator, scrap paper, and patty paper may be used. A compass and straightedge is required. The Geometry and Honors Geometry Semester examination will have the following types of questions: Selected Response Student Produced Response (Grid-in) Short nswer calculator, scrap paper, and patty paper

More information

Mth 97 Winter 2013 Sections 4.3 and 4.4

Mth 97 Winter 2013 Sections 4.3 and 4.4 Section 4.3 Problem Solving Using Triangle Congruence Isosceles Triangles Theorem 4.5 In an isosceles triangle, the angles opposite the congruent sides are congruent. A Given: ABC with AB AC Prove: B C

More information

Unit 6: Connecting Algebra and Geometry Through Coordinates

Unit 6: Connecting Algebra and Geometry Through Coordinates Unit 6: Connecting Algebra and Geometry Through Coordinates The focus of this unit is to have students analyze and prove geometric properties by applying algebraic concepts and skills on a coordinate plane.

More information

Math Geometry FAIM 2015 Form 1-A [ ]

Math Geometry FAIM 2015 Form 1-A [ ] Math Geometry FAIM 2015 Form 1-A [1530458] Student Class Date Instructions Use your Response Document to answer question 13. 1. Given: Trapezoid EFGH with vertices as shown in the diagram below. Trapezoid

More information

MATH 113 Section 8.2: Two-Dimensional Figures

MATH 113 Section 8.2: Two-Dimensional Figures MATH 113 Section 8.2: Two-Dimensional Figures Prof. Jonathan Duncan Walla Walla University Winter Quarter, 2008 Outline 1 Classifying Two-Dimensional Shapes 2 Polygons Triangles Quadrilaterals 3 Other

More information

Points, lines, angles

Points, lines, angles Points, lines, angles Point Line Line segment Parallel Lines Perpendicular lines Vertex Angle Full Turn An exact location. A point does not have any parts. A straight length that extends infinitely in

More information

m 6 + m 3 = 180⁰ m 1 m 4 m 2 m 5 = 180⁰ m 6 m 2 1. In the figure below, p q. Which of the statements is NOT true?

m 6 + m 3 = 180⁰ m 1 m 4 m 2 m 5 = 180⁰ m 6 m 2 1. In the figure below, p q. Which of the statements is NOT true? 1. In the figure below, p q. Which of the statements is NOT true? m 1 m 4 m 6 m 2 m 6 + m 3 = 180⁰ m 2 m 5 = 180⁰ 2. Look at parallelogram ABCD below. How could you prove that ABCD is a rhombus? Show that

More information

Geometry Quarter 4 Test Study Guide

Geometry Quarter 4 Test Study Guide Geometry Quarter 4 Test Study Guide 1. Write the if-then form, the converse, the inverse and the contrapositive for the given statement: All right angles are congruent. 2. Find the measures of angles A,

More information

Geometry Vocabulary Word Wall Cards

Geometry Vocabulary Word Wall Cards Geometry Vocabulary Word Wall Cards Mathematics vocabulary word wall cards provide a display of mathematics content words and associated visual cues to assist in vocabulary development. The cards should

More information

Geometry Fundamentals Midterm Exam Review Name: (Chapter 1, 2, 3, 4, 7, 12)

Geometry Fundamentals Midterm Exam Review Name: (Chapter 1, 2, 3, 4, 7, 12) Geometry Fundamentals Midterm Exam Review Name: (Chapter 1, 2, 3, 4, 7, 12) Date: Mod: Use the figure at the right for #1-4 1. What is another name for plane P? A. plane AE B. plane A C. plane BAD D. plane

More information

SOL Chapter Due Date

SOL Chapter Due Date Name: Block: Date: Geometry SOL Review SOL Chapter Due Date G.1 2.2-2.4 G.2 3.1-3.5 G.3 1.3, 4.8, 6.7, 9 G.4 N/A G.5 5.5 G.6 4.1-4.7 G.7 6.1-6.6 G.8 7.1-7.7 G.9 8.2-8.6 G.10 1.6, 8.1 G.11 10.1-10.6, 11.5,

More information

Select the best answer. Bubble the corresponding choice on your scantron. Team 13. Geometry

Select the best answer. Bubble the corresponding choice on your scantron. Team 13. Geometry Team Geometry . What is the sum of the interior angles of an equilateral triangle? a. 60 b. 90 c. 80 d. 60. The sine of angle A is. What is the cosine of angle A? 6 4 6 a. b. c.. A parallelogram has all

More information

Geometry Reasons for Proofs Chapter 1

Geometry Reasons for Proofs Chapter 1 Geometry Reasons for Proofs Chapter 1 Lesson 1.1 Defined Terms: Undefined Terms: Point: Line: Plane: Space: Postulate 1: Postulate : terms that are explained using undefined and/or other defined terms

More information

High School Mathematics Geometry Vocabulary Word Wall Cards

High School Mathematics Geometry Vocabulary Word Wall Cards High School Mathematics Geometry Vocabulary Word Wall Cards Table of Contents Reasoning, Lines, and Transformations Basics of Geometry 1 Basics of Geometry 2 Geometry Notation Logic Notation Set Notation

More information

NAEP Released Items Aligned to the Iowa Core: Geometry

NAEP Released Items Aligned to the Iowa Core: Geometry NAEP Released Items Aligned to the Iowa Core: Geometry Congruence G-CO Experiment with transformations in the plane 1. Know precise definitions of angle, circle, perpendicular line, parallel line, and

More information

Geometry Third Quarter Study Guide

Geometry Third Quarter Study Guide Geometry Third Quarter Study Guide 1. Write the if-then form, the converse, the inverse and the contrapositive for the given statement: All right angles are congruent. 2. Find the measures of angles A,

More information

PRACTICE TEST ANSWER KEY & SCORING GUIDELINES GEOMETRY

PRACTICE TEST ANSWER KEY & SCORING GUIDELINES GEOMETRY Ohio s State Tests PRACTICE TEST ANSWER KEY & SCORING GUIDELINES GEOMETRY Table of Contents Questions 1 30: Content Summary and Answer Key... iii Question 1: Question and Scoring Guidelines... 1 Question

More information

a triangle with all acute angles acute triangle angles that share a common side and vertex adjacent angles alternate exterior angles

a triangle with all acute angles acute triangle angles that share a common side and vertex adjacent angles alternate exterior angles acute triangle a triangle with all acute angles adjacent angles angles that share a common side and vertex alternate exterior angles two non-adjacent exterior angles on opposite sides of the transversal;

More information

Geometry Definitions, Postulates, and Theorems. Chapter 3: Parallel and Perpendicular Lines. Section 3.1: Identify Pairs of Lines and Angles.

Geometry Definitions, Postulates, and Theorems. Chapter 3: Parallel and Perpendicular Lines. Section 3.1: Identify Pairs of Lines and Angles. Geometry Definitions, Postulates, and Theorems Chapter : Parallel and Perpendicular Lines Section.1: Identify Pairs of Lines and Angles Standards: Prepare for 7.0 Students prove and use theorems involving

More information

1 In the diagram below, lines, m, n, and p intersect line r. Which statement is true? 1) 2) 3) 4)

1 In the diagram below, lines, m, n, and p intersect line r. Which statement is true? 1) 2) 3) 4) 1 In the diagram below, lines, m, n, and p intersect line r. Which statement is true? 2 Which transformation would not always produce an image that would be congruent to the original figure? translation

More information

1) AB CD 2) AB = CD 3) AE = EB 4) CE = DE

1) AB CD 2) AB = CD 3) AE = EB 4) CE = DE 1 In trapezoid RSTV with bases RS and VT, diagonals RT and SV intersect at Q. If trapezoid RSTV is not isosceles, which triangle is equal in area to RSV? 1) RQV 2) RST 3) RVT 4) SVT 2 In the diagram below,

More information

Term Definition Figure

Term Definition Figure Notes LT 1.1 - Distinguish and apply basic terms of geometry (coplanar, collinear, bisectors, congruency, parallel, perpendicular, etc.) Term Definition Figure collinear on the same line (note: you do

More information

Unit 1 Test Review: Transformations in the Coordinate Plane

Unit 1 Test Review: Transformations in the Coordinate Plane Unit 1 Test Review: Transformations in the Coordinate Plane 1. As shown in the diagram below, when hexagon ABCDEF is reflected over line m, the image is hexagon A B C D E F. Under this transformation,

More information

Geometry Level 1 Midterm Review Packet. I. Geometric Reasoning (Units 1 & 2) Circle the best answer.

Geometry Level 1 Midterm Review Packet. I. Geometric Reasoning (Units 1 & 2) Circle the best answer. 2015 Midterm Outline (120pts) I. 28 Multiple Choice (28pts) II. 12 True & False (12pts) III. 13 Matching (13pts) IV. 14 Short Answer (49pts) V. 3 Proofs (18pts) VI. 10 Common Assessment (10pts) Geometry

More information

Geometry. Cluster: Experiment with transformations in the plane. G.CO.1 G.CO.2. Common Core Institute

Geometry. Cluster: Experiment with transformations in the plane. G.CO.1 G.CO.2. Common Core Institute Geometry Cluster: Experiment with transformations in the plane. G.CO.1: Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions of

More information

Geometry/Trigonometry Summer Assignment

Geometry/Trigonometry Summer Assignment Student Name: 2017 Geometry/Trigonometry Summer Assignment Complete the following assignment in the attached packet. This is due the first day of school. Bring in a copy of your answers including ALL WORK

More information

Transformations and Congruence

Transformations and Congruence Name Date Class UNIT 1 Transformations and Congruence Unit Test: C 1. Draw ST. Construct a segment bisector and label the intersection of segments Y. If SY = a + b, what is ST? Explain your reasoning.

More information

Geometry Basics of Geometry Precise Definitions Unit CO.1 OBJECTIVE #: G.CO.1

Geometry Basics of Geometry Precise Definitions Unit CO.1 OBJECTIVE #: G.CO.1 OBJECTIVE #: G.CO.1 OBJECTIVE Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions of point, line, distance along a line, and distance

More information

Guided Problem Solving

Guided Problem Solving -1 Guided Problem Solving GPS Student Page 57, Exercises 1 1: Match each rule with the correct translation. A. (x, y) (x, y 1 ) I. P(, 1) P (3, ) B. (x, y) (x 1 3, y) II. Q(3, 0) Q (3, ) C. (x, y) (x 1,

More information

MR. JIMENEZ FINAL EXAM REVIEW GEOMETRY 2011

MR. JIMENEZ FINAL EXAM REVIEW GEOMETRY 2011 PAGE 1 1. The area of a circle is 25.5 in. 2. Find the circumference of the circle. Round your answers to the nearest tenth. 2. The circumference of a circle is 13.1 in. Find the area of the circle. Round

More information

Geometry. (F) analyze mathematical relationships to connect and communicate mathematical ideas; and

Geometry. (F) analyze mathematical relationships to connect and communicate mathematical ideas; and (1) Mathematical process standards. The student uses mathematical processes to acquire and demonstrate mathematical understanding. The student is (A) apply mathematics to problems arising in everyday life,

More information

M2 GEOMETRY REVIEW FOR MIDTERM EXAM

M2 GEOMETRY REVIEW FOR MIDTERM EXAM M2 GEOMETRY REVIEW FOR MIDTERM EXAM #1-11: True or false? If false, replace the underlined word or phrase to make a true sentence. 1. Two lines are perpendicular if they intersect to form a right angle.

More information

Geometry. Released Test Questions. 2 In the diagram below,! 1 "!4. Consider the arguments below.

Geometry. Released Test Questions. 2 In the diagram below,! 1 !4. Consider the arguments below. 1 Which of the following best describes deductive reasoning? using logic to draw conclusions based on accepted statements accepting the meaning of a term without definition defining mathematical terms

More information

Honors Geometry Sections

Honors Geometry Sections Honors Geometry Sections 14.3 14.4 Name Determine whether the figure has rotational symmetry. If so, describe the rotations that map the figure onto itself. 1. 2. 3. Use the diagram to complete each sentence.

More information

If three points A (h, 0), P (a, b) and B (0, k) lie on a line, show that: a b 1.

If three points A (h, 0), P (a, b) and B (0, k) lie on a line, show that: a b 1. ASSIGNMENT ON STRAIGHT LINES LEVEL 1 (CBSE/NCERT/STATE BOARDS) 1 Find the angle between the lines joining the points (0, 0), (2, 3) and the points (2, 2), (3, 5). 2 What is the value of y so that the line

More information

heptagon; not regular; hexagon; not regular; quadrilateral; convex concave regular; convex

heptagon; not regular; hexagon; not regular; quadrilateral; convex concave regular; convex 10 1 Naming Polygons A polygon is a plane figure formed by a finite number of segments. In a convex polygon, all of the diagonals lie in the interior. A regular polygon is a convex polygon that is both

More information

An Approach to Geometry (stolen in part from Moise and Downs: Geometry)

An Approach to Geometry (stolen in part from Moise and Downs: Geometry) An Approach to Geometry (stolen in part from Moise and Downs: Geometry) Undefined terms: point, line, plane The rules, axioms, theorems, etc. of elementary algebra are assumed as prior knowledge, and apply

More information

2. A straightedge can create straight line, but can't measure. A ruler can create straight lines and measure distances.

2. A straightedge can create straight line, but can't measure. A ruler can create straight lines and measure distances. 5.1 Copies of Line Segments and Angles Answers 1. A drawing is a rough sketch and a construction is a process to create an exact and accurate geometric figure. 2. A straightedge can create straight line,

More information

For all questions, E. NOTA means none of the above answers is correct. Diagrams are NOT drawn to scale.

For all questions, E. NOTA means none of the above answers is correct. Diagrams are NOT drawn to scale. For all questions, means none of the above answers is correct. Diagrams are NOT drawn to scale.. In the diagram, given m = 57, m = (x+ ), m = (4x 5). Find the degree measure of the smallest angle. 5. The

More information

SOME IMPORTANT PROPERTIES/CONCEPTS OF GEOMETRY (Compiled by Ronnie Bansal)

SOME IMPORTANT PROPERTIES/CONCEPTS OF GEOMETRY (Compiled by Ronnie Bansal) 1 SOME IMPORTANT PROPERTIES/CONCEPTS OF GEOMETRY (Compiled by Ronnie Bansal) 1. Basic Terms and Definitions: a) Line-segment: A part of a line with two end points is called a line-segment. b) Ray: A part

More information

7. 2 More Things Under. Construction. A Develop Understanding Task

7. 2 More Things Under. Construction. A Develop Understanding Task 7 Construction A Develop Understanding Task Like a rhombus, an equilateral triangle has three congruent sides. Show and describe how you might locate the third vertex point on an equilateral triangle,

More information

MATH II SPRING SEMESTER FINALS REVIEW PACKET

MATH II SPRING SEMESTER FINALS REVIEW PACKET Name Date Class MATH II SPRING SEMESTER FINALS REVIEW PACKET For 1 2, use the graph. 6. State the converse of the statement. Then determine whether the converse is true. Explain. If two angles are vertical

More information

Chapter 8. Properties of Triangles and Quadrilaterals. 02/2017 LSowatsky

Chapter 8. Properties of Triangles and Quadrilaterals. 02/2017 LSowatsky Chapter 8 Properties of Triangles and Quadrilaterals 02/2017 LSowatsky 1 8-1A: Points, Lines, and Planes I can Identify and label basic geometric figures. LSowatsky 2 Vocabulary: Point: a point has no

More information

Geometry Regular Midterm Exam Review (Chapter 1, 2, 3, 4, 7, 9)

Geometry Regular Midterm Exam Review (Chapter 1, 2, 3, 4, 7, 9) Geometry Regular Midterm Exam Review (Chapter 1, 2, 3, 4, 7, 9) Name: Date: Mod: Use the figure at the right for #1-4 1. What is another name for plane P? A. plane AE B. plane A C. plane BAD D. plane BAC

More information

Unit 2: Triangles and Polygons

Unit 2: Triangles and Polygons Unit 2: Triangles and Polygons Background for Standard G.CO.9: Prove theorems about lines and angles. Objective: By the end of class, I should Using the diagram below, answer the following questions. Line

More information

Angles. An angle is: the union of two rays having a common vertex.

Angles. An angle is: the union of two rays having a common vertex. Angles An angle is: the union of two rays having a common vertex. Angles can be measured in both degrees and radians. A circle of 360 in radian measure is equal to 2π radians. If you draw a circle with

More information

Course Guide (/8/teachers/teacher_course_guide.html) Print (/8/teachers/print_materials.html) LMS (/8

Course Guide (/8/teachers/teacher_course_guide.html) Print (/8/teachers/print_materials.html) LMS (/8 (http://openupresources.org)menu Close OUR Curriculum (http://openupresources.org) Professional Development (http://openupresources.org/illustrative-mathematics-professional-development) Implementation

More information

Student Name: Teacher: Date: Miami-Dade County Public Schools. Test: 9_12 Mathematics Geometry Exam 2

Student Name: Teacher: Date: Miami-Dade County Public Schools. Test: 9_12 Mathematics Geometry Exam 2 Student Name: Teacher: Date: District: Miami-Dade County Public Schools Test: 9_12 Mathematics Geometry Exam 2 Description: GEO Topic 5: Quadrilaterals and Coordinate Geometry Form: 201 1. If the quadrilateral

More information

CCGPS UNIT 5 Semester 2 COORDINATE ALGEBRA Page 1 of 38. Transformations in the Coordinate Plane

CCGPS UNIT 5 Semester 2 COORDINATE ALGEBRA Page 1 of 38. Transformations in the Coordinate Plane CCGPS UNIT 5 Semester 2 COORDINATE ALGEBRA Page 1 of 38 Transformations in the Coordinate Plane Name: Date: MCC9-12.G.CO.1 Know precise definitions of angle, circle, perpendicular line, parallel line,

More information

Videos, Constructions, Definitions, Postulates, Theorems, and Properties

Videos, Constructions, Definitions, Postulates, Theorems, and Properties Videos, Constructions, Definitions, Postulates, Theorems, and Properties Videos Proof Overview: http://tinyurl.com/riehlproof Modules 9 and 10: http://tinyurl.com/riehlproof2 Module 9 Review: http://tinyurl.com/module9livelesson-recording

More information

Point A location in geometry. A point has no dimensions without any length, width, or depth. This is represented by a dot and is usually labelled.

Point A location in geometry. A point has no dimensions without any length, width, or depth. This is represented by a dot and is usually labelled. Test Date: November 3, 2016 Format: Scored out of 100 points. 8 Multiple Choice (40) / 8 Short Response (60) Topics: Points, Angles, Linear Objects, and Planes Recognizing the steps and procedures for

More information

Geometry Midterm Review 2019

Geometry Midterm Review 2019 Geometry Midterm Review 2019 Name To prepare for the midterm: Look over past work, including HW, Quizzes, tests, etc Do this packet Unit 0 Pre Requisite Skills I Can: Solve equations including equations

More information

Geometry - Chapter 1 - Corrective #1

Geometry - Chapter 1 - Corrective #1 Class: Date: Geometry - Chapter 1 - Corrective #1 Short Answer 1. Sketch a figure that shows two coplanar lines that do not intersect, but one of the lines is the intersection of two planes. 2. Name two

More information

Geometry Practice Questions Semester 1

Geometry Practice Questions Semester 1 Geometry Practice Questions Semester 1 MAFS.912.G-CO.1.1 - Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions of point, line,

More information

Unit Number of Days Dates. 1 Angles, Lines and Shapes 14 8/2 8/ Reasoning and Proof with Lines and Angles 14 8/22 9/9

Unit Number of Days Dates. 1 Angles, Lines and Shapes 14 8/2 8/ Reasoning and Proof with Lines and Angles 14 8/22 9/9 8 th Grade Geometry Curriculum Map Overview 2016-2017 Unit Number of Days Dates 1 Angles, Lines and Shapes 14 8/2 8/19 2 - Reasoning and Proof with Lines and Angles 14 8/22 9/9 3 - Congruence Transformations

More information

U4 Polygon Notes January 11, 2017 Unit 4: Polygons

U4 Polygon Notes January 11, 2017 Unit 4: Polygons Unit 4: Polygons 180 Complimentary Opposite exterior Practice Makes Perfect! Example: Example: Practice Makes Perfect! Def: Midsegment of a triangle - a segment that connects the midpoints of two sides

More information

A parabola has a focus at the point (6, 0), and the equation of the directrix is

A parabola has a focus at the point (6, 0), and the equation of the directrix is 1 A parabola has a focus at the point (6, 0), and the equation of the directrix is Part A Determine the vertex of the parabola. Explain your answer. Part B Prove that point (12, 8) is on the parabola.

More information

UNIT 5: GEOMETRIC AND ALGEBRAIC CONNECTIONS. Apply Geometric Concepts in Modeling Situations

UNIT 5: GEOMETRIC AND ALGEBRAIC CONNECTIONS. Apply Geometric Concepts in Modeling Situations UNIT 5: GEOMETRIC AND ALGEBRAIC CONNECTIONS This unit investigates coordinate geometry. Students look at equations for circles and use given information to derive equations for representations of these

More information

YEAR AT A GLANCE Student Learning Outcomes by Marking Period

YEAR AT A GLANCE Student Learning Outcomes by Marking Period 2014-2015 Term 1 Overarching/general themes: Tools to Build and Analyze Points, Lines and Angles Dates Textual References To Demonstrate Proficiency by the End of the Term Students Will : Marking Period

More information

If two sides and the included angle of one triangle are congruent to two sides and the included angle of 4 Congruence

If two sides and the included angle of one triangle are congruent to two sides and the included angle of 4 Congruence Postulates Through any two points there is exactly one line. Through any three noncollinear points there is exactly one plane containing them. If two points lie in a plane, then the line containing those

More information

The Research- Driven Solution to Raise the Quality of High School Core Courses. Geometry. Course Outline

The Research- Driven Solution to Raise the Quality of High School Core Courses. Geometry. Course Outline The Research- Driven Solution to Raise the Quality of High School Core Courses Course Outline Course Outline Page 2 of 5 0 1 2 3 4 5 ACT Course Standards A. Prerequisites 1. Skills Acquired by Students

More information

Honors Geometry Pacing Guide Honors Geometry Pacing First Nine Weeks

Honors Geometry Pacing Guide Honors Geometry Pacing First Nine Weeks Unit Topic To recognize points, lines and planes. To be able to recognize and measure segments and angles. To classify angles and name the parts of a degree To recognize collinearity and betweenness of

More information

Chapter 2 QUIZ. Section 2.1 The Parallel Postulate and Special Angles

Chapter 2 QUIZ. Section 2.1 The Parallel Postulate and Special Angles Chapter 2 QUIZ Section 2.1 The Parallel Postulate and Special Angles (1.) How many lines can be drawn through point P that are parallel to line? (2.) Lines and m are cut by transversal t. Which angle corresponds

More information

GEOMETRY POSTULATES AND THEOREMS. Postulate 1: Through any two points, there is exactly one line.

GEOMETRY POSTULATES AND THEOREMS. Postulate 1: Through any two points, there is exactly one line. GEOMETRY POSTULATES AND THEOREMS Postulate 1: Through any two points, there is exactly one line. Postulate 2: The measure of any line segment is a unique positive number. The measure (or length) of AB

More information

Geometry I Can Statements I can describe the undefined terms: point, line, and distance along a line in a plane I can describe the undefined terms:

Geometry I Can Statements I can describe the undefined terms: point, line, and distance along a line in a plane I can describe the undefined terms: Geometry I Can Statements I can describe the undefined terms: point, line, and distance along a line in a plane I can describe the undefined terms: point, line, and distance along a line in a plane I can

More information

3 Identify shapes as two-dimensional (lying in a plane, flat ) or three-dimensional ( solid ).

3 Identify shapes as two-dimensional (lying in a plane, flat ) or three-dimensional ( solid ). Geometry Kindergarten Identify and describe shapes (squares, circles, triangles, rectangles, hexagons, cubes, cones, cylinders, and spheres). 1 Describe objects in the environment using names of shapes,

More information

A calculator and patty paper may be used. A compass and straightedge is required. The formulas below will be provided in the examination booklet.

A calculator and patty paper may be used. A compass and straightedge is required. The formulas below will be provided in the examination booklet. The Geometry and Honors Geometry Semester examination will have the following types of questions: Selected Response Student Produced Response (Grid-in) Short nswer calculator and patty paper may be used.

More information

Section Congruence Through Constructions

Section Congruence Through Constructions Section 10.1 - Congruence Through Constructions Definitions: Similar ( ) objects have the same shape but not necessarily the same size. Congruent ( =) objects have the same size as well as the same shape.

More information

Geometry Review for Semester 1 Final Exam

Geometry Review for Semester 1 Final Exam Name Class Test Date POINTS, LINES & PLANES: Geometry Review for Semester 1 Final Exam Use the diagram at the right for Exercises 1 3. Note that in this diagram ST plane at T. The point S is not contained

More information

Common Core Specifications for Geometry

Common Core Specifications for Geometry 1 Common Core Specifications for Geometry Examples of how to read the red references: Congruence (G-Co) 2-03 indicates this spec is implemented in Unit 3, Lesson 2. IDT_C indicates that this spec is implemented

More information

1) Draw line m that contains the points A and B. Name two other ways to name this line.

1) Draw line m that contains the points A and B. Name two other ways to name this line. 1) Draw line m that contains the points A and B. Name two other ways to name this line. 2) Find the next 3 terms in the sequence and describe the pattern in words. 1, 5, 9, 13,,, 3) Find the next 3 terms

More information

A VERTICAL LOOK AT KEY CONCEPTS AND PROCEDURES GEOMETRY

A VERTICAL LOOK AT KEY CONCEPTS AND PROCEDURES GEOMETRY A VERTICAL LOOK AT KEY CONCEPTS AND PROCEDURES GEOMETRY Revised TEKS (2012): Building to Geometry Coordinate and Transformational Geometry A Vertical Look at Key Concepts and Procedures Derive and use

More information