Standard specifications ST AX ST70L-01-AX

Size: px
Start display at page:

Download "Standard specifications ST AX ST70L-01-AX"

Transcription

1 Standard specifications ST AX ST70L-01-AX 1st edition: Feb 2008 NACHI-FUJIKOSHI CORP. Robot Production Plant

2 Table of contents 1. Outline Robot AX controller Characteristic Robot AX controller Basic specifications Robot dimensions and working envelope Detail of tool mounting plate Application mounting hole pattern on Forearm Installation dimensions Maximum wrist load Torque map Wrist axis load conditions How to calculate inertia moment of wrist axes Maximum Forearm Load Option specifications Application wiring and piping diagram for standard Spot welding specification (Option) Handling specification (Option) Bypass cable (Option) Installation (specification which contains a robot) Paint color Warranty...25

3 Page-1 1. Outline NACHI ROBOT has used mechatronic techniques, cultivated throughout the last few decades, to supply robots suited for industries utilizing welding, spray painting and the material handling techniques Robot The ST100 robot and the ST70L robot are robots of simple highly rigid structure, which is optimal for spot welding, handling and other applications. Table 1.1 Robot specifications Robot model ST ST70L-01 Load weight 100 kg 70 kg Installation Floor mount Floor mount 1.2. AX controller The AX controller is high performance robot controller based on open concept, which used the personal computer as the base. A de facto standard OS (Windows NT embedded + RTOS) is adopted as an operating system. Moreover, safe equipment, such as double emergency stop circuit and 3 position enable switch, is carried as standard. AX controller AX Domestic specification (for Japan) AX Overseas specification

4 Page-2 2. Characteristic 2.1. Robot 1. Due to the compact body, high- density installation is possible. 2. Because the hight of the robot is small, a multi-layer installation with other robots is possible. 3. The ST100 robot and the ST70L robot feature a powerful wrist that can support a large tool. 4. Due to a wide operation area, it is possible to use for various production process. 5. Due to the powerful arm and concentration on acceleration, rapid short-pitch motion is possible allowing shorter cycle times to be obtained. 6. The ST100 robot and the ST70L robot feature the largest wrist bend angle in its class due to the slim compact wrist. The reduction of restriction due to wrist operation opens the robot to more diverse applications. 7. The required installation area has been reduced by routing water, air and cables through the swivel base AX controller 1. It is compact even if it adds abundant functions. 2. Large-sized LCD of a color graphic display was adopted as the Teaching pendant. Thereby more easy and intelligible operation is attained and large shortening of teaching time can be aimed at. 3. It is possible to build the optimal operating environment for a robot's work system by the customize function of menus, such as various parameter setup and a peripheral equipment setup, or a screen. 4. It has equipped with safe equipment, such as double emergency stop circuit limit switch and 3 position enable switch, as standard, and ANSI/RIA is supported.

5 Page-3 3. Basic specifications Robot model: ST100-01, ST70L-01 Table 3.1 Basic specifications Item Specifications Robot model ST ST70L-01 Construction Articulated Number of axis 6 Drive system AC servo motor J1 axis ± 2.62 rad J2 axis ~ rad Max. working envelope J3 axis ~ rad J4 axis ± 6.28 rad J5 axis ± 2.36 rad Max. speed Max. pay load Allowable static load torque J6 axis J1 axis J2 axis J3 axis J4 axis J5 axis J6 axis ± 6.28 rad 1.57 rad / s 1.57 rad / s 1.57 rad / s 2.27 rad / s 2.27 rad / s 3.14 rad / s Wrist 100 kg 70 kg *1, *2 Forearm Max. 25 kg J4 axis 818 N m 584 N m J5 axis 818 N m 584 N m J6 axis 441 N m 294 N m J4 axis 96.3 kg m kg m 2 Allowable moment of inertia *3 J5 axis 96.3 kg m kg m 2 J6 axis 43.0 kg m kg m 2 Position repeatability ± 0.3 mm Ambient temperature 0 ~ 45 C Installation parameter Ambient humidity 20 to 85 % RH (No dew formation) Vibration value Below 0.5 G Robot type Floor mount Robot mass 760 kg 790 kg 1 [rad] = 180 / π [ ], 1 [N m] = 1 / 9.8 [kgf m] *1 : Varies with installation locations or wrist load mass. *2 : The maximum load mass applies only to the upper part of forearm and the upper part of the J3. *3 : The Allowable moment of inertia of a wrist changes with load conditions of a wrist.

6 Page-4 4. Robot dimensions and working envelope Robot model: ST Fig. 4.1 Robot dimensions and working envelope (ST100-01)

7 Page-5 Robot model: ST70L-01 Fig. 4.2 Robot dimensions and working envelope (ST70L-01)

8 Page-6 5. Detail of tool mounting plate Please use Installation P.C.D of Fig. 5.1 when you tighten the end effector installation bolt. Installation P.C.D other than Installation P.C.D of Fig. 5.1 are also available. Please inquire our company service section. CAUTION Don t screw in installation bolts over thread tap depth. Installation bolts over thread tap depth may damage the wrist. Robot model: ST100-01, ST70L-01 Fig. 5.1 Detail of tool mounting plate

9 Page-7 6. Application mounting hole pattern on Forearm Fig. 6.1 Detail of forearm peripheral equipment mounting risers

10 Page-8 7. Installation dimensions Fix the robot swivel base for the robot installation. CAUTION A mechanical stopper is mounted 5 degrees over the J1 working envelope (software limit). When installing a guard fence (safety fence), please make sure to consider the motion range, wrist posture, and the shape of the end effector. DANGER To operate safely, range of the motion can be restricted in the J1, J2, and J3. Robot model: ST Fig. 7.1 Robot installation dimensions (ST100-01)

11 Page-9 Robot model: ST70L-01 Fig. 7.2 Robot installation dimensions (ST70L-01)

12 Page Maximum wrist load CAUTION A mass limit, allowable load torque and allowable moment of inertia restrict the load attached to the robot wrist tool flange. Moreover, the allowable static load torque value changes by the actual load inertia moment. Keep strictly that the wrist load should be less than the allowable values. If used outside the allowable values, robot operations shall not be guaranteed. 1. Allowable maximum payload mass (weight) Table 8.1 Allowable maximum payload mass Robot model ST ST70L-01 Maximum pay load mass 100 kg 70 kg 2. Allowable static load torque Table 8.2 Allowable static load torque Robot model Maximum static load torque About the J4 About the J5 About the J6 ST N m 818 N m 441 N m ST70L N m 584 N m 294 N m 3. Allowable moment of inertia Table 8.3 Allowable moment of inertia Robot model Maximum moment of inertia About the J4 About the J5 About the J6 ST kg m kg m kg m 2 ST70L kg m kg m kg m 2 Use the load center of gravity point by the condition that enters within the range of the wrist axis torque map referring to Fig. 8.1, Fig Use the static load torque and the inertia moment by the condition that enters in the line chart of the graph referring to Fig. 8.3, Fig. 8.4.

13 Page Torque map Robot model: ST Fig. 8.1 Wrist axis torque mapping (ST100-01) Robot model: ST70L-01 Fig. 8.2 Wrist axis torque mapping (ST70L-01)

14 Page Wrist axis load conditions Robot model: ST Robot model: ST70L-01 Fig. 8.3 Wrist axis load conditioning (ST100-01) Fig. 8.4 Wrist axis load conditioning (ST70L-01)

15 Page How to calculate inertia moment of wrist axes The method of calculating the inertia moment around a general each axis is shown below. I Z I z Z I y I x x y z m (X m,y m,z m ) I Y Y I X X Fig. 8.5 Wrist load outline chart X: Axis for J5 rotation in the basic wrist configuration Y: Axis for J6 and J4 rotation in the basic wrist configuration Z: Axis at right angles to the X and Y axes in the basic wrist configuration x: Axis parallel to the X axis in the load gravity center y: Axis parallel to the Y axis in the load gravity center z: Axis parallel to the Z axis in the load gravity center I x : Inertia moment around the X axis passing through the load gravity center I y : Inertia moment around the Y axis passing through the load gravity center I z : Inertia moment around the Z axis passing through the load gravity center m: Load mass (X m, Y m, Z m ):Gravity center coordinates of load 1. Inertia moment around the J6 The inertia moment around the J6 becomes the following expressions. J 6 Y 2 m 2 m I = I = m ( X + Z ) + I y 2. Inertia moment around the J4 and J5 The value changes into the inertia moment around the J4 and J5 depending on the posture of the J6. The maximum value around X axis and Z axis in Fig. 8.5 is assumed to be an inertia moment. I = max (, I J 4 J 5 X Z Q I Q I X Z = m ( Y = m ( X 2 m I 2 m + Z + Y 2 m 2 m ) ) + I ) + I x x

16 Page Maximum Forearm Load The application equipment can be installed on the upper part of forearm. Use the load condition in the forearm referring to Fig. 9.1 and Fig. 9.2, when the wrist load is the maximum by the condition that the load center of gravity point enters within the slash area. And, if the load mass on the wrist is small, it is possible to install those equipments up to 45kg (at maximum). For more technical information/materials, please contact our engineering department. Robot model: ST Fig. 9.1 Forearm load conditioning (ST100-01) Robot model: ST70L-01 Fig. 9.2 Forearm load conditioning (ST70L-01)

17 Page Option specifications Table 10.1 Option specifications No. Item Specifications 1 Encoder connector protector Encoder connector cover for the J1, J2 and J3. Robot type ST ST70L-01 Parts No. OP-P Transfer jig Fork bracket OP-S Zeroing pin & Zeroing block Additional equipment for spot welding Additional equipment for handling Hose φ8 X 6 (Water supply X3, Drainage X 3) Gun primary cable 22 mm 2 X 3 Application cable 0.3 mm 2 X 40 wires Servo gun control cable (Motor) X 1 Servo gun control cable (Encoder) X 1 Hose φ8 X 1 (Air X 3) Application cable 0.3 mm 2 X 40 wires Servo gun control cable (Motor) X 1 Servo gun control cable (Encoder) X 1 OP-T2-040 OPJ-WAC-0043 OPJ-WAC Flange adaptor (For P.C.D.92) OP-W Bypass cable BCUNIT20-20 :Possible to correspond/-:impossible to correspond

18 Page Application wiring and piping diagram for standard Spot welding specification (Option) Robot model: ST (OPJ-WAC-0043) Fig Wiring and piping diagram (spot welding specification)

19 Fig Wiring and piping diagram (spot welding specification) Page-17

20 Page-18 Fig BJ3 side servo gun control cable connector Connector form (CNR010) Housing: JFM2MDN-22V-K (JST) Contact: SJ2M-01GF-M1.0S (JST) Wire-side shell: JFM-PSA-4 (JST) Guide plate A kit: JFM-GPAK-4 (JST) Partner connector form Housing: JFM2FDN-22V-K (JST) Contact: SJ2F-01GF-P1.0 (JST) (Wire of Application:AWG#24~20) Wire-side shell: JFM-WSA-4-A (JST) φ26.2 φ28.0 Wire-side shell: JFM-WSA-4-C (JST) φ15.5 φ16.5 Guide plate A kit: JFM-GPAK-4 (JST) Fig BJ1 side application cable connector (40 wires)

21 Page-19 Connector form (CN61, CN63) Housing: SMP-10V-BC (JST) Partner connector form Housing: SMR-10V-B (JST) Contact: SYM-001T-P0.6 (Wire of Application:AWG#22~28) Pressure tool: YRS-121 Connector form (CN62, CN64) Housing: SMP-11V-BC (JST) Partner connector form Housing: SMR-11V-B (JST) Contact: SYM-001T-P0.6 (Wire of Application:AWG#22~28) Pressure tool: YRS-121 Fig BJ3 side application cable connector (spot welding specification)

22 Page Handling specification (Option) Robot model: ST100-01, ST70L-01 (OPJ-WAC-0044) Fig Wiring and piping diagram (handling specification)

23 Fig Wiring and piping diagram (handling specification) Page-21

24 Page-22 Fig BJ3 side servo gun control cable connector Connector form (CNR010) Housing: JFM2MDN-22V-K (JST) Contact: SJ2M-01GF-M1.0S (JST) Wire-side shell: JFM-PSA-4 (JST) Guide plate A kit: JFM-GPAK-4 (JST) Partner connector form Housing: JFM2FDN-22V-K (JST) Contact: SJ2F-01GF-P1.0 (JST) (Wire of Application:AWG#24~20) Wire-side shell: JFM-WSA-4-A (JST) φ26.2 φ28.0 Wire-side shell: JFM-WSA-4-C (JST) φ15.5 φ16.5 Guide plate A kit: JFM-GPAK-4 (JST) Fig BJ1 side application cable connector (40 wires)

25 Page-23 Connector form (CN61, CN63) Housing: SMP-10V-BC (JST) Partner connector form Housing: SMR-10V-B (JST) Contact: SYM-001T-P0.6 (Wire of Application:AWG#22~28) Pressure tool: YRS-121 Connector form (CN62, CN64) Housing: SMP-11V-BC (JST) Partner connector form Housing: SMR-11V-B (JST) Contact: SYM-001T-P0.6 (Wire of Application:AWG#22~28) Pressure tool: YRS-121 Fig BJ3 side application cable connector (handling specification)

26 POWER Page Bypass cable (Option) CNE cable CNMB cable Bypass cable Standard wireharness Robot Bypass cable box Fig Bypass cable connection outline figure Controller Fig Bypass cable box

27 Page Installation (specification which contains a robot) 1. Delivery condition Because the expense is different, which form to choose be sufficiently examined. Style Condition Details 1 Delivery on the truck 2 3 Delivery after installation and test-run Delivery after installation and test-run with work piece 2. Operation and maintenance education Robot is delivered on the truck near the entrance of customer s plant. Robot is installed and test-run done. After style 2, teaching with work piece is done. The special spot operation guide and the special spot preservation guide are the outside of the estimation. Also, there is schooling system in the Toyama factory, too. Consult with each NACHI-FUJIKOSHI office for the details. 3. The earth wire construction of controller is class 3 earthing things above mentioned are necessary. 14. Paint color Standard color 15. Warranty Elapse of 1 year after delivery. Controller cabinet Munsell 10GY9/1 Robot body Munsell 2.5YR-5.5/14 <Note> The specifications and the external view of the products on this document are subject to modifications without any advance notice for improvements.

Standard specifications MC20-01-AX20 MC10L-01-AX20

Standard specifications MC20-01-AX20 MC10L-01-AX20 Standard specifications MC20-01-AX20 MC10L-01-AX20 8th edition 0912, SMCEN-017-008,001 Table of contents 1. Outline...1 1.1. MC robot... 1 1.2. AX20 controller...1 2. Characteristic...2 2.1. MC robot...

More information

Standard specifications MR20-02-AX20 MR20L-01-AX20

Standard specifications MR20-02-AX20 MR20L-01-AX20 Standard specifications MR20-02-AX20 MR20L-01-AX20 6th edition 0912, SMREN-017-006,001 Table of contents 1. Outline...1 1.1. MR robot... 1 1.2. AX20 controller...1 2. Characteristic...2 2.1. MR robot...

More information

High-Speed, High-Performance Industrial Robots

High-Speed, High-Performance Industrial Robots High-Speed, High-erformance Industrial Robots up to 80 kg payload Kawasaki Robotics (USA), Inc. HIGH-SEED, HIGH-ERFORMANCE INDUSTRIAL ROBOTS The new R-Series Robots are setting the benchmark for all small

More information

Standard specifications RS007LFF60

Standard specifications RS007LFF60 Standard specifications RS007LFF60 December 05, 2017 KAWASAKI HEAVY INDUSTRIES, LTD. ROBOT DIVISION Materials and specifications are subject to change without notice. Specification : (Arm): (Controller):

More information

The Flexible Heavy-Duty Robot

The Flexible Heavy-Duty Robot The Flexible Heavy-Duty Robot up to kg payload Kawasaki Robotics (USA), Inc. THE FLEXIBLE HEAVY-DUTY ROBOT The high payload long reach Z-Series robots were developed using Kawasaki s advanced technology

More information

Standard specifications BA006LFE01C01

Standard specifications BA006LFE01C01 Standard specifications BA006LF01C01 ###### 1st dition : August 30, 2016 KAWASAKI HAVY INDUSTRIS, LTD. ROBOT DIVISION Materials and specifications are subject to change without notice. Specification :

More information

CAT. NO. R0004-C. FD-B4, FD-B4L, FD-V6, FD-V6L, FD-H5, and FD-V20 COMPLETE ROBOTIC ARC WELDING SYSTEMS

CAT. NO. R0004-C. FD-B4, FD-B4L, FD-V6, FD-V6L, FD-H5, and FD-V20 COMPLETE ROBOTIC ARC WELDING SYSTEMS CAT. NO. R0004-C FD-B4, FD-B4L, FD-V6, FD-V6L, FD-H5, and FD-V20 COMPLETE ROBOTIC ARC WELDING SYSTEMS 2 CHANGING THE FUTURE OF MANUFACTURING The ideal solution for automation of welding Intuitive Operation

More information

Description: IRB-540 Robot with 6-axis Flexi-Wrist Manipulator, S4P Controller, Conveyor Tracking, and Analog Paint Regulation (APR)

Description: IRB-540 Robot with 6-axis Flexi-Wrist Manipulator, S4P Controller, Conveyor Tracking, and Analog Paint Regulation (APR) Standard Module # Description: IRB-540 Robot with 6-axis Flexi-Wrist Manipulator, S4P Controller, Conveyor Tracking, and Analog Paint Regulation (APR) The IRB-540 Flexi-Wrist finishing robot is specifically

More information

KR QUANTEC K ultra. Robots. With F Variants Specification. KUKA Roboter GmbH. Issued: Version: Spez KR QUANTEC K ultra V10 KR QUANTEC

KR QUANTEC K ultra. Robots. With F Variants Specification. KUKA Roboter GmbH. Issued: Version: Spez KR QUANTEC K ultra V10 KR QUANTEC Robots KUKA Roboter GmbH KR QUANTEC K ultra With F Variants Specification KR QUANTEC K ultra Issued: 02.09.2016 Version: Spez KR QUANTEC K ultra V10 Copyright 2016 KUKA Roboter GmbH Zugspitzstraße 140

More information

EUROPE R-SERIES. up to 80 kg payload

EUROPE R-SERIES. up to 80 kg payload EUROPE R-SERIES up to 80 kg payload »Simple and friendly«into THE FUTURE»40 years of experience and state-of-the-art robot technology«the R-SERIES 1. High speed 4. Protection Kawasaki Robotics invents

More information

Robots. KUKA Roboter GmbH KR 360 FORTEC. With F and C Variants Specification. Issued: Version: Spez KR 360 FORTEC V2

Robots. KUKA Roboter GmbH KR 360 FORTEC. With F and C Variants Specification. Issued: Version: Spez KR 360 FORTEC V2 Robots KUKA Roboter GmbH KR 360 FORTEC With F and C Variants Specification Issued: 16.04.2014 Version: Spez KR 360 FORTEC V2 Copyright 2014 KUKA Laboratories GmbH Zugspitzstraße 140 D-86165 Augsburg Germany

More information

Teach Pendant. Applications. Used on all Nachi robot products. Open Concept

Teach Pendant. Applications. Used on all Nachi robot products. Open Concept AW AW Nachi Industrial Robot Controller This high-performance, multi-tasking controller offers an open concept design, along with increased performance and improved menudriven programming. Reliability

More information

RV-6SD/6SDL Series MITSUBISHI INDUSTRIAL ROBOT RV-6SD RV-6SDL. RV-SD series

RV-6SD/6SDL Series MITSUBISHI INDUSTRIAL ROBOT RV-6SD RV-6SDL. RV-SD series MITSUBISHI INDUSTRIAL ROBOT /6SDL Series RV-SD series The Ultimate Series of Powerful Mitsubishi Robots A new high performance controller design offers faster speed and greater accuracy. Enhanced compatibility

More information

RV-SD series. RV-6SD/6SDL Series MITSUBISHI INDUSTRIAL ROBOT RV-6SD RV-6SDL

RV-SD series. RV-6SD/6SDL Series MITSUBISHI INDUSTRIAL ROBOT RV-6SD RV-6SDL MITSUBISHI INDUSTRIAL ROBOT RV-6SD/6SDL Series RV-6SD RV-6SDL RV-SD series The Ultimate Series of Powerful Mitsubishi Robots A new high performance controller design offers faster speed and greater accuracy.

More information

Description. 2.8 Robot Motion. Floor-mounting. Dimensions apply to IRB 6400/ Shelf-mounting

Description. 2.8 Robot Motion. Floor-mounting. Dimensions apply to IRB 6400/ Shelf-mounting Description 2.8 Robot Motion Floor-mounting Dimensions apply to IRB 64/ 3.-7 2943 694 146 3 Shelf-mounting 67 94 2871 184 3116 Figure 8 Working space of IRB 64 and IRB 64S (dimensions in mm). Product Specification

More information

NSW Office: Unit1, South Street, Rydalmere, NSW 2116 QLD Office: 1/70 Cnr Brecknock and Boniface St, Archerfield, QLD 4108

NSW Office: Unit1, South Street, Rydalmere, NSW 2116 QLD Office: 1/70 Cnr Brecknock and Boniface St, Archerfield, QLD 4108 NACHI (AUSTRALIA) PTY LTD Robotic Division & VIC Office 38 Melverton Dr, Hallam, VIC 3803 Ph: 61-3-9796 4144, Fax: 61-3-9796 3899 www.nachirobotics.com.au NSW Office: Unit1, 23-29 South Street, Rydalmere,

More information

TABLE OF CONTENTS. Page 2 14

TABLE OF CONTENTS. Page 2 14 TABLE OF CONTENTS INTRODUCTION... 3 WARNING SIGNS AND THEIR MEANINGS... 3 1. PRODUCT OVERVIEW... 4 1.1. Basic features and components... 4 1.2. Supply package... 5 1.3. Robot arm specifications... 6 1.4.

More information

Robot Control. Robotics. Robot Control. Vladimír Smutný

Robot Control. Robotics. Robot Control. Vladimír Smutný Robot Control Robotics Robot Control Vladimír Smutný Center for Machine Perception Czech Institute for Informatics, Robotics, and Cybernetics (CIIRC) Czech Technical University in Prague Kinematic Model

More information

Z series. Kawasaki Robot. Kawasaki Robot. Large payload robots up to 300 kg. Z series CAUTIONS TO BE TAKEN TO ENSURE SAFETY

Z series. Kawasaki Robot. Kawasaki Robot. Large payload robots up to 300 kg. Z series CAUTIONS TO BE TAKEN TO ENSURE SAFETY Z series Kawasaki Robot Z series Large payload robots up to 3 kg ROBOT DIVISION Tokyo Head Office/Robot Division 1-14-5, Kaigan, Minato-ku, Tokyo 15-8315, Japan hone: +81-3-3435-251 Fax: +81-3-3437-988

More information

New Generation Robots MOTOMAN SDA, SIA Series

New Generation Robots MOTOMAN SDA, SIA Series New Generation Robots MOTOMN SD, SI Series Certified for ISO9001 and ISO14001 C E R T I F M N GE ME N T I E D SYSTE M C E R T I F M N GE ME N T I E D SYSTE M QMS ccreditation R009 QULITY SYSTEM JQ-0813

More information

Experts of factory creation to achieve a healthy working environment and high productivity.

Experts of factory creation to achieve a healthy working environment and high productivity. Experts of factory creation to achieve a healthy working environment and high productivity. Developing various in-house factory automation (FA) systems, the DENSO Group provides a flexible manufacturing

More information

Robot Control. Robotics. Robot Control. Vladimír Smutný. Center for Machine Perception

Robot Control. Robotics. Robot Control. Vladimír Smutný. Center for Machine Perception Robot Control Robotics Robot Control Vladimír Smutný Center for Machine Perception Czech Institute for Informatics, Robotics, and Cybernetics (CIIRC) Czech Technical University in Prague ROBOTICS: Vladimír

More information

R series. Japan & Asia. Small-to-medium size general purpose robots. R series. ROBOT DIVISION

R series. Japan & Asia. Small-to-medium size general purpose robots. R series. ROBOT DIVISION R series R series Japan & sia Small-to-medium size general purpose robots ROBOT DIVISION http://www.khi.co.jp/robot/ Tokyo Head Office/Robot Division 1-14-, Kaigan, Minato-ku, Tokyo -831, Japan hone: +81-3-343-82

More information

CHAPTER 3 Installation Conditions

CHAPTER 3 Installation Conditions CHAPTER 3 Installation Conditions 3.1 Dimensions 3.2 Mounting 3.3 Connections with Host System This chapter gives the external dimensions, installation conditions, surface temperature conditions, cable

More information

Z series. Kawasaki Robot. Kawasaki Robot. Large payload robots - up to 300 kg. Z series. Kawasaki Robotics (USA), Inc.

Z series. Kawasaki Robot. Kawasaki Robot. Large payload robots - up to 300 kg. Z series. Kawasaki Robotics (USA), Inc. Z series Kawasaki Robot Z series Large payload robots - up to kg Kawasaki Robotics (US), Inc Corporate Headquarters for mericas 2814 Lakeview Drive, Wixom, MI 48393, US hone: +1-248-446-41 Fax: +1-248-446-42

More information

Standard specifications MZ07-01/MZ07P-01-CFD MZ07L-01/MZ07LP-01-CFD

Standard specifications MZ07-01/MZ07P-01-CFD MZ07L-01/MZ07LP-01-CFD Standard specifications MZ07-01/MZ07P-01-CFD MZ07L-01/MZ07LP-01-CFD 1st edition 1308, SMZEN-054-001,002 Table of contents 1. Outline... 1 2. Basic specifications... 2 2.1 Basic specification of Robot body...

More information

ROBOT. Total Robot Catalog

ROBOT. Total Robot Catalog ROBOT Total Robot Catalog NACHI-FUJIKOSHI s industrial robots are making innovations in manufacturing throughout the world. NACHI-FUJIKOSHI leveraged know-how from their hydraulic and machine tool divisions

More information

TX200 range. 6 axis industrial robots

TX200 range. 6 axis industrial robots TX200 range 6 axis industrial robots A unique 4 axis and 6 axis robot range for all applications Whenever industrial companies need speed, repeatability and reliability, Stäubli robots provide the most

More information

Robots. KUKA Roboter GmbH. KR AGILUS sixx. With W and C Variants Specification. Issued: Version: Spez KR AGILUS sixs V8 en (PDF)

Robots. KUKA Roboter GmbH. KR AGILUS sixx. With W and C Variants Specification. Issued: Version: Spez KR AGILUS sixs V8 en (PDF) Robots KUKA Roboter GmbH KR AGILUS sixx With W and C Variants Specification Issued: 22.07.2013 Version: Spez KR AGILUS sixs V8 en (PDF) Copyright 2013 KUKA Roboter GmbH Zugspitzstraße 140 D-86165 Augsburg

More information

Product Information. RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft

Product Information. RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft Product Information RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft 08/2018 RCN 6000 series Absolute angle encoder with Integrated stator coupling Hollow through shaft 180

More information

Manipulator Path Control : Path Planning, Dynamic Trajectory and Control Analysis

Manipulator Path Control : Path Planning, Dynamic Trajectory and Control Analysis Manipulator Path Control : Path Planning, Dynamic Trajectory and Control Analysis Motion planning for industrial manipulators is a challenging task when obstacles are present in the workspace so that collision-free

More information

DYNAMIC, FLEXIBLE, PRECISE

DYNAMIC, FLEXIBLE, PRECISE TO FREELY PROGRAMMABLE ROTARY TABLES TO TORQUE ROTARY TABLE Precise and fast mechanical integration through pin holes, safe electrical commissioning through perfect hardware. TO TORQUE ROTARY TABLE: DYNAMIC,

More information

CHAPTER 3 Installation Conditions

CHAPTER 3 Installation Conditions CHAPTER 3 Installation Conditions 3.1 Dimensions 3.2 Mounting 3.3 Connections with Host System This chapter gives the external dimensions, installation conditions, surface temperature conditions, cable

More information

RV-4F-Q/7F-Q/13F-Q/20F-Q Series

RV-4F-Q/7F-Q/13F-Q/20F-Q Series Mitsubishi Industrial Robot RV-4F-Q/7F-Q/13F-Q/20F-Q Series Standard Specifications Manual (CR750-Q Controller) BFP-A8933-G Safety Precautions Always read the following precautions and the separate "Safety

More information

FOR PC BOARD TO FLAT CABLE

FOR PC BOARD TO FLAT CABLE AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right

More information

CAPITAL ROBOTICS. Robotic Fusion Arc 180L Welding Cell

CAPITAL ROBOTICS. Robotic Fusion Arc 180L Welding Cell Robotic Fusion Arc 180L Welding Cell Fusion Arc Weld Cells We have re-engineered our cell from the ground up, starting with the base of the unit, which uses slotand-tab construction to provide a very rigid

More information

SM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.

SM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2. Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove

More information

CHAPTER 3 Installation Conditions

CHAPTER 3 Installation Conditions CHAPTER 3 Installation Conditions 3.1 Dimensions 3.2 Mounting 3.3 Cable Connections 3.4 Jumper Settings This chapter gives the external dimensions, installation conditions, surface temperature conditions,

More information

EUROPE Y-SERIES. up to 3 kg payload

EUROPE Y-SERIES. up to 3 kg payload EUROPE Y-SERIES up to 3 kg payload »Simple and friendly«into THE FUTURE»40 years of experience and state-of-the-art robot technology«the Y-SERIES 1. Speed 4. Flexibility Fast Pick & Place Operations are

More information

Bus Capable. Compact. Flexible. WSG Intelligent Gripper

Bus Capable. Compact. Flexible. WSG Intelligent Gripper WSG Bus Capable. Compact. Flexible. WSG Intelligent Gripper Servo-electric 2-finger parallel gripper with highly precise gripping force control and long stroke Field of Application A ll-purpose, ultra-flexible

More information

K series. Kawasaki Robot. K series. Painting robots explosion-proof and painting package cells

K series. Kawasaki Robot. K series. Painting robots explosion-proof and painting package cells K series Kawasaki Robot K series Painting robots explosion-proof and painting package cells A selection of robots is available to match your painting application. Kawasaki K series robots are explosion-proof

More information

Horizontal Articulaed Robot IXP Series PowerCon SCARA. Instruction Manual First Edition

Horizontal Articulaed Robot IXP Series PowerCon SCARA. Instruction Manual First Edition Horizontal Articulaed Robot IXP Series PowerCon SCARA Cleanroom Type, Arm Length 350/450/550/650 IXP-3C3515, IXP-4C3515 IXP-3C4515, IXP-4C4515 IXP-3C5520, IXP-4C5520 IXP-3C6520, IXP-4C6520 Dust Proof/Splash

More information

60 mm sq. (2.36 inch sq.)

60 mm sq. (2.36 inch sq.) 6 mm sq. (.6 inch sq.).8 /step RoHS Bipolar winding, Connector type Bipolar winding, Dimensions for attaching NEMA are interchangeable (7. mm-pitch) Unipolar winding, Connector type p. 7 Unipolar winding,

More information

ROBOTICS. Product specification IRB 7600

ROBOTICS. Product specification IRB 7600 ROBOTICS Product specification IRB 7600 Trace back information: Workspace R18-1 version a9 Checked in 2018-03-22 Skribenta version 5.2.025 Product specification IRB 7600-500/2.55 IRB 7600-400/2.55 IRB

More information

Elfin Series Collaborative Robot

Elfin Series Collaborative Robot Elfin Series Collaborative Robot Flexible, Reliable, Efficient, Effective As industry today strives for more efficiency, increased output and reduced costs, Motion Control Products has introduced the Elfin

More information

ILA1F572PB1A0 integrated drive ILA with servo motor V - CANopen - PCB connector

ILA1F572PB1A0 integrated drive ILA with servo motor V - CANopen - PCB connector Characteristics integrated drive ILA with servo motor - 24..36 V - CANopen - PCB connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number

More information

Inductive Cylinder Position Sensors

Inductive Cylinder Position Sensors Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs

More information

Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications

Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with

More information

This overview summarizes topics described in detail later in this chapter.

This overview summarizes topics described in detail later in this chapter. 20 Application Environment: Robot Space and Motion Overview This overview summarizes topics described in detail later in this chapter. Describing Space A coordinate system is a way to describe the space

More information

Customer Responsibilities

Customer Responsibilities For Research Use Only. Not for use in diagnostic procedures. Thank you for purchasing the Agilent G5590A BenchCel Workstation. To get you started and to assure a successful and timely installation, please

More information

Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications

Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with

More information

Module 1 : Introduction to robotics. Lecture 3 : Industrial Manipulators & AGVs. Objectives. History of robots : Main bodies and wrists

Module 1 : Introduction to robotics. Lecture 3 : Industrial Manipulators & AGVs. Objectives. History of robots : Main bodies and wrists Module 1 : Introduction to robotics Lecture 3 : Industrial Manipulators & AGVs Objectives In this course you will learn the following History of development of robots. Main body types of manipulators with

More information

Robots. KUKA Deutschland GmbH. KR AGILUS fivve. With C Variant Specification KR AGILUS. fivve. Issued: Version: Spez KR AGILUS fivve V8

Robots. KUKA Deutschland GmbH. KR AGILUS fivve. With C Variant Specification KR AGILUS. fivve. Issued: Version: Spez KR AGILUS fivve V8 Robots KUKA Deutschland GmbH KR AGILUS fivve With C Variant Specification KR AGILUS fivve Issued: 22.05.2018 Version: Spez KR AGILUS fivve V8 Copyright 2018 KUKA Deutschland GmbH Zugspitzstraße 140 D-86165

More information

MELFA RV-6S/6SL Series RV-12S/12SL Series Palletizing precision is improved. Trajectory precision is improved.

MELFA RV-6S/6SL Series RV-12S/12SL Series Palletizing precision is improved. Trajectory precision is improved. Mitsubishi Electric Industrial s -Highly Capable s MELF RV-/L Series and RV-/L Series [1] Optimal cceleration/deceleration Control / Optimal Override Function [2] Correction rograing this kind of application

More information

Product Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications

Product Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications Product Information ECN 1324S EQN 1336S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications 112015 ECN 1324S, EQN 1336S Rotary encoders for absolute position values with

More information

Delta robot. System configuration. The fastest picking system integrated in the Sysmac platform

Delta robot. System configuration. The fastest picking system integrated in the Sysmac platform Delta robot The fastest picking system integrated in the Sysmac platform Robot control integrated in the NJ robotics controller Control of up to 8 robots by one controller Degrees of freedom: 3 + 1 (rotational

More information

ECI 4010 EBI 4010 Absolute Rotary Encoders with 90 mm Hollow shaft. Product Information

ECI 4010 EBI 4010 Absolute Rotary Encoders with 90 mm Hollow shaft. Product Information Product Information ECI 4010 EBI 4010 Absolute Rotary Encoders with 90 mm Hollow shaft Suited for Safety-Related Applications up to SIL 3 When Coupled with Additional Measures March 2017 ECI 4010, EBI

More information

Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing

Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral

More information

ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information

ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information Product Information ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing Suited for safety-related applications up to SIL 3 when coupled with additional measures 09/2018 ECI 1319,

More information

TX axis industrial robot

TX axis industrial robot TX2-40 6 axis industrial robot A unique 4 axis and 6 axis robot range for all applications Whenever industrial companies need speed, Designed to work in the most hostile repeatability and reliability,

More information

Key Features. Application - Arc Welding - Sealing - Cutting - Assembly

Key Features. Application - Arc Welding - Sealing - Cutting - Assembly Key Features - Enlargement of working envelope by serial link structure - Improvement of dynamic performance Application - Arc Welding - Sealing - Cutting - Assembly Certificate (ISO 9001, ISO 14001, QS-9000TE,

More information

Product specification IRB 460

Product specification IRB 460 Product specification IRB 460 Trace back information: Workspace Main version a214 Checked in 2017-03-16 Skribenta version 5.1.011 Product specification IRB 460-110/2.4 Document ID: 3HAC039611-001 Revision:

More information

TX2-60 Range. 6 axis industrial robot

TX2-60 Range. 6 axis industrial robot TX2-60 Range 6 axis industrial robot A unique 4 axis and 6 axis robot range for all applications Whenever industrial companies need speed, Designed to work in the most hostile repeatability and reliability,

More information

RCP2 Quick Start Guide

RCP2 Quick Start Guide RCP2 Quick Start Guide 1. Parts Confirmation Please contact your sales representative if any of these parts are missing or incorrect: - Controller: RCP2-C or RCP2-CG - Actuator: Slider type or Rod type

More information

Automatic Control Industrial robotics

Automatic Control Industrial robotics Automatic Control Industrial robotics Prof. Luca Bascetta (luca.bascetta@polimi.it) Politecnico di Milano Dipartimento di Elettronica, Informazione e Bioingegneria Prof. Luca Bascetta Industrial robots

More information

Metrics Maryland from Order web:

Metrics Maryland from  Order web: 1 2 Precision Alignment Table AT is a rotary positioning mechanism for precision angle correction, which consists of a high rigidity steel table and bed assembled with Crossed Roller Bearing as a table

More information

P7000 Stepper Drives. P7000 Introduction

P7000 Stepper Drives. P7000 Introduction P7 Introduction P7 Stepper Drives Danaher Motion introduces the P7 Series Stepper Drives. Previously unheard of stepper features allow the P7 to provide true servo-like performance at a fraction of the

More information

TX2-90 Range. 6 axis industrial robots

TX2-90 Range. 6 axis industrial robots TX2-90 Range axis industrial robots A unique 4 axis and axis robot range for all applications Whenever industrial companies need speed, Designed to work in the most hostile repeatability and reliability,

More information

Installation and Connection Manual

Installation and Connection Manual E Series Installation and Connection Manual Kawasaki Heavy Industries, Ltd. 90202-1110DEN PREFACE This manual describes the installation and connection of the E series controllers. This manual covers the

More information

Product Information. ECI 4090 S Absolute Rotary Encoder with 90 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications

Product Information. ECI 4090 S Absolute Rotary Encoder with 90 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications Product Information ECI 4090 S Absolute Rotary Encoder with 90 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications March 2017 ECI 4090 S Rotary encoder for absolute position values

More information

Product Information. ECI 4090S Absolute Rotary Encoder with 180 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications

Product Information. ECI 4090S Absolute Rotary Encoder with 180 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications Product Information ECI 4090S Absolute Rotary Encoder with 180 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications July 2017 ECI 4090S Rotary encoders for absolute position values

More information

EPSON 6-AXIS ROBOT PROSIX N2 MAXIMUM EFFICIENCY MINIMUM FOOTPRINT

EPSON 6-AXIS ROBOT PROSIX N2 MAXIMUM EFFICIENCY MINIMUM FOOTPRINT EPSON 6-AXIS ROBOT PROSIX N2 MAXIMUM EFFICIENCY MINIMUM FOOTPRINT 3 THE NEW N SERIES FROM EPSON THE MOST COMPACT 6-AXIS ROBOT EVER BUILT EXTREMELY MANOEUVRABLE WITH FOLDING ARM A traditional 6-axis robot

More information

onlinecomponents.com

onlinecomponents.com 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.

More information

CR2/CR2A/CR2B Controller INSTRUCTION MANUAL

CR2/CR2A/CR2B Controller INSTRUCTION MANUAL MITSUBISHI Mitsubishi Industrial Robot CR2/CR2A/CR2B Controller INSTRUCTION MANUAL Controller setup, basic operation, and maintenance BFP-A5991-J Safety Precautions Always read the following precautions

More information

RX160 range. 6 axis industrial robots

RX160 range. 6 axis industrial robots RX160 range 6 axis industrial robots A unique 4 axis and 6 axis robot range for all applications Whenever industrial companies need speed, repeatability and reliability, Stäubli robots provide the most

More information

TOX -ElectricDrive. Electrical drive technology with press forces from kn

TOX -ElectricDrive. Electrical drive technology with press forces from kn TOX -ElectricDrive Electrical drive technology with press forces from 2 1000 kn 1 The electromechanical servo drive When working processes require flexibility and precision, electromechanical servo drives

More information

Standard specifications MZ04-01/MZ04E-01-CFD

Standard specifications MZ04-01/MZ04E-01-CFD Standard specifications MZ04-01/MZ04E-01-CFD 2nd edition 1412, SMZEN-078-002,001 Table of contents 1. Outline... 1 2. Basic specifications... 2 2.1 Basic specification of Robot body... 2 2.2 Basic specification

More information

NOMAD 4000 Marking System

NOMAD 4000 Marking System Nomad 4000 Marking System General Arrangement SYSTEM OVERVIEW The Telesis NOMAD 4000 marking system permanently prints messages into a variety of materials such as steel, aluminum, and plastic. A hardened

More information

Omron Adept Hornet 565 Robot Quick Setup Guide

Omron Adept Hornet 565 Robot Quick Setup Guide Omron Adept Hornet 565 Robot Quick Setup Guide P/N: 14692-000, Rev A July, 2015 1.1 Introduction This Quick Setup Guide steps you through the installation and start-up of your Omron Adept Hornet 565 robot.

More information

Motorized Linear Slides. EZS2 Series

Motorized Linear Slides. EZS2 Series Motorized Linear Slides EZS Series Advancing Positioning Applications Oriental Motor's Motorized Linear Slides The EZS Series motorized linear slide is designed to achieve greater convenience and performance

More information

ROBOTICS. Product specification IRB 14000

ROBOTICS. Product specification IRB 14000 ROBOTICS Product specification IRB 14000 Trace back information: Workspace R18-2 version a10 (not checked in) Published 2018-10-10 at 10:14:00 Skribenta version 5.3.008 Product specification IRB 14000

More information

ROBOTICS. Product specification IRB 660

ROBOTICS. Product specification IRB 660 ROBOTICS Product specification IRB 660 Trace back information: Workspace R17-2 version a19 (not checked in) Published 2017-10-17 at 07:27:58 Skribenta version 5.1.011 Product specification IRB 660-180/3.15

More information

TX60 Range. 6 axis industrial robot

TX60 Range. 6 axis industrial robot TX60 Range 6 axis industrial robot A unique 4 axis and 6 axis robot range for all applications Whenever industrial companies need speed, Designed to work in the most hostile repeatability and reliability,

More information

IBM. Rack Installation Instructions

IBM. Rack Installation Instructions IBM Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following:

More information

Rack Installation Instructions

Rack Installation Instructions Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following: v Two

More information

xtablet T1600 Vehicle Holder Installation Guide

xtablet T1600 Vehicle Holder Installation Guide This document will step you through setting up the T1600 Vehicle Holder installation and tips for a safe, clean and long lasting installation. Preparing to Mount the Vehicle Holder Warning : Dock mounting

More information

Product Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications

Product Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications Product Information RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications 07/2018 RCN 2000 series Absolute angle encoders for safety-related applications Safe absolute position

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information

Mechanical structure of a robot=skeleton of human body Study of structure of a robot=physical structure of the manipulator structure

Mechanical structure of a robot=skeleton of human body Study of structure of a robot=physical structure of the manipulator structure UNIT I FUNDAMENTALS OF ROBOT Part A 1. Define Robot. An industrial robot is a re-programmable, multifunctional manipulator designed to move materials, parts, tools, or specialized devices through variable

More information

Kinematics. Kinematics analyzes the geometry of a manipulator, robot or machine motion. The essential concept is a position.

Kinematics. Kinematics analyzes the geometry of a manipulator, robot or machine motion. The essential concept is a position. Kinematics Kinematics analyzes the geometry of a manipulator, robot or machine motion. The essential concept is a position. 1/31 Statics deals with the forces and moments which are aplied on the mechanism

More information

RX160 range. 6 axis industrial robots

RX160 range. 6 axis industrial robots RX160 range 6 axis industrial robots A unique 4 axis and 6 axis robot range for all applications Whenever industrial companies need Designed to work in the most hostile speed, repeatability and reliability,

More information

F1000 User's Manual. (Version: V1.01)

F1000 User's Manual. (Version: V1.01) (Version: V1.01) Contents Chapter 1 Overview... 2 Chapter 2 Installation... 3 2.1 Installation guide... 3 2.1.1 Installation position... 3 2.1.2 NEMA4 standard installation... 3 2.1.3 Environment precautions...

More information

RS-FS-N01 Wind speed transmitter user's Guide (485type)

RS-FS-N01 Wind speed transmitter user's Guide (485type) RS-FS-N01 Wind speed transmitter user's Guide (485type) Issue: V1.0 1 2 Context 1. Introduction... 4 2. Installation instructions...5 3. Configure the software installation and use... 6 4. Communication

More information

ROBOTICS. Product specification IRB 760

ROBOTICS. Product specification IRB 760 ROBOTICS Product specification IRB 760 Trace back information: Workspace R18-2 version a9 Checked in 2018-10-09 Skribenta version 5.3.008 Product specification IRB 760-450/3.2 Document ID: 3HAC039612-001

More information

SYSTEMS ELECTRONICS GROUP

SYSTEMS ELECTRONICS GROUP SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 MACHINE COMPONENTS RSV34-MS1 RESOLVER with MS CONNECTOR Brushless, Single-turn Resolver Rated to 3,000 RPM Rotary Position Transducer for M4500, M4020, M4040, M4041,

More information

Absolute Rotary Encoder E6C-N. Ordering Information. Ideal for Stepping Motor Tripping Detection and Position Control of Loaders or Unloaders

Absolute Rotary Encoder E6C-N. Ordering Information. Ideal for Stepping Motor Tripping Detection and Position Control of Loaders or Unloaders Absolute Rotary Encoder Ideal for Stepping Motor Tripping Detection and Position Control of Loaders or Unloaders No need to reset origin point at power-up IP50 certification Ideal for packaging, plastics,

More information

DX200 OPTIONS INSTRUCTIONS

DX200 OPTIONS INSTRUCTIONS DX200 OPTIONS INSTRUCTIONS FOR ARM INTERFERE CHECK FUNCTION Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and retain for future reference. MOTOMAN INSTRUCTIONS

More information

TX40 ESD. 6 axis industrial robot Electronics industry

TX40 ESD. 6 axis industrial robot Electronics industry TX40 ESD 6 axis industrial robot Electronics industry A unique 4 axis and 6 axis robot range for all applications Whenever industrial companies need speed, repeatability and reliability, Stäubli robots

More information

CT4. Rotational Axis Equipped. High-speed Cartesian Robot

CT4. Rotational Axis Equipped. High-speed Cartesian Robot Rotational Axis Equipped High-speed Cartesian Robot CT4 High-speed Cartesian Robot That Shortens Assembly/Inspection Cycle Times by Operating at High Speed, Ensuring High Rigidity and Demonstrating Excellent

More information

BENEFITS OF JMT PRESS BRAKES

BENEFITS OF JMT PRESS BRAKES BENEFITS OF JMT PRESS BRAKES JMT press brakes benefit your bottom line with higher quality parts, faster cycle times, lower operating and maintenance costs. Whether your application requires bending simple

More information