User Manual. RINS Software Revision >V9.26

Transcription

1 User Manual INTERNAL SIREN WARNING The Enforcer 32-WE conrol panel conains a 100 dba siren, please be aware of his when in use. RINS Sofware Revision >V9.26

2 Conens Page A: Inroducion 3 B: Keypads / Readers 4 C: Using he Keyfob 5 D: Arming he Enforcer 6 E: Disarming he Enforcer 7 F: Arming / disarming wih he ag reader 8 G: Open doors / Arm and Disarm (Enry Conrol) 8 H: SMS Commands (GSM V9.2 or above only) 9 H: SMS Commands (GSM version only) - Coninued I: Pyroni SMS Conrol Mobile Phone Applicaion 12 J: Chime Feaure 13 K: Personal Aack From Keypad 13 L: Fire Alarm From Keypad 13 M: Maser Manager Menu Opions 14 N: Enering he Maser Manager Menu 15 1 Maser Manager Menu: Bypass Inpus 15 2 Maser Manager Menu: Operae User Auomaion Oupus 15 3 Maser Manager Menu: Configure Dae & Time* 16 4 Maser Manager Menu: Change Codes (Configure user codes, learn ags and keyfobs)* 17 5 Maser Manager Menu: Review Logs (Even memory logs) 20 6 Maser Manager Menu: SMS Phonebook 21 7 Maser Manager Menu: Walk Tes 21 8 Maser Manager Menu: Bell Tes 21 9 Maser Manager Menu: PC Connec Menu Maser Manager Menu: Allow Engineer Menu Maser Manager Menu: Block Remoe Arm Maser Manager Menu: Block UDL Maser Manager Menu: Ei Maser Menu 24 O: Engineer Conacs and Table 25 P: Inpu Tables 26 Q: User Tables 28 R: Oupus 29 S: Produc Informaion 30 T: Noes * To quick sar he sysem, only hese feaures are needed o be programmed. 31 2

3 A: Inroducion Two Way Wireless High Securiy The Enforcer 32-WE is a wireless alarm sysem ha has been designed wih your securiy in mind; wih quick and easy insallaion and minimal mainenance, he Enforcer 32-WE proecs your home wih a muliude of unique feaures. Taking full advanage of Pyroni s innovaive wo way wireless echnology, he wireless devices on he Enforcer 32-WE sysem are consanly communicaing wih each oher, using he Pyroni High Securiy Wireless Encrypion Proocol. The Enforcer 32-WE wo way wireless devices are fully operaional when he sysem is armed, making your sysem more secure, compared o oher wireless sysems, where devices are disabled for up o five minues afer every acivaion o save baery, herefore compromising your securiy. The Enforcer 32-WE has been engineered by Pyroni as a secure, reliable and easy o use wireless alarm sysem. I includes he following feaures: Baery Monioring/Saving The Enforcer 32-WE sysem uses advanced echnology o preserve he baery life of each wireless device. However, he Enforcer 32-WE informs you when a baery needs replacing a monh in advance before he device sops working. This key feaure gives you enough ime o change he baery in he specific device. Oher wireless alarm sysems may no give you a low baery warning signal, meaning ha devices could sop working, leaving your environmen unproeced. High Securiy Encrypion 128 bi high securiy wireless encrypion proocol, and inelligen wireless jamming deecion. User Friendly Keyfobs The fully wo way wireless keyfob allows you o see he saus of he conrol uni via 3 colour LEDs: Sysem armed: When he sysem is armed a RED LED will illuminae momenarily Sysem disarmed: When he sysem is disarmed a GREEN LED will illuminae momenarily Sysem faul: When he sysem is in faul condiion an AMBER LED will illuminae momenarily, This will also flash when he keyfob is unable o arm he sysem. I is possible o allocae differen funcions o each keyfob such as arming / disarming differen areas, acivaing oupus o conrol eernal devices such as gaes, requesing sysem saus, and acivaing panic alarms. Up o 32 wireless keyfobs can be added o he Enforcer 32-WE sysem. Each wireless keyfob has is own user ID which can be repored o he ARC and user mobile phone which are sored ino he even log of he conrol panel individually. The keyfob also allows you o arm/disarm every area individually, giving you oal conrol of your sysem. User Auomaion Oupus The Enforcer 32-WE includes user auomaion oupus ha give you he opion o operae up o 20 devices such as gaes, lighs, sprinklers, ec. via your keypad or remoely via your Keyfob, eending he use of your securiy sysem. SMS Te Noificaions and Remoe Conrol The sysem will noify you via SMS e messages in real ime. For eample noificaion ha your child has reurned home from school safely or noificaion of a leakage of waer in your propery ec. 3

4 C H A P T E R 2 : K E Y P A D S / R E A D E R S B: Keypads / Readers There are four differen devices ha may be used o arm/disarm he alarm sysem; hese are he main Defaul keypad, he Maser eernal Code: ag reader, 1234inernal ag reader and he Arming/Disarming keyfob. a = Quick ei manager menu. Mehods: iem. There are hree differen devices ha may be used in he process of arming/disarming he alarm b = Moves backwards o he previous menu sysem; hese are he keypad, ag reader and keyfob. Conrol Panel Keypad iem. C H A P T E R 2 : K E Y P A D S / R E A D E R S a = Quick ei manager menu. c = Enables Buon chime Operaions and displays addiional b = Moves informaion backwards a in = o he Ei he log. previous user menu menu There are four differen devices ha may / be Selec used informaion area o A. arm/disarm in he he alarm log. sysem; hese are iem. he main keypad, D = he Moves b eernal forward = Moves in ag he backwards reader, log, scrolls inernal o beween he previous ag reader main and menu he iem keyfob. / Selecs area B. c = Enables opions chime and c and eners = Displays displays he maser addiional manager informaion menu. in he log / Scrolls o previous opion in a sub-menu / Selecs informaion in he fp = area log. Used o C. acivae FIRe/PA alarms. D = Moves forward D in = he Moves log, scrolls forward beween in he log / Selecs area D. Conrol opions Panel and [] Keypad eners = Direcional buons. f he p maser C= HUsed manager A P Tfor E R menu. Fire C2 H: and AK PE PA YT EP alarms. R A D2 S : K/ ER YEP A D ES R/ S a = Quick ei manager R E Amenu. D E R S fp = Used = o Selecs acivae [ ] iems FIRe/PA = and Direcional eners alarms. menus. buons (used for choosing opions and moving hrough e). There are four differen = Cancels There = iems, Selecs are devices and four moves iems differen ha may o and he eners devices be used ne ha o menus. may arm/disarm be used he o alarm arm/disarm sysem; hese alarm are [] sysem; hese are he = Direcional main keypad, buons. b = Moves backwards o he previous menu iem in maser he he = manager Moves main eernal keypad, ag forward menu he reader, in eernal inernal he main ag. reader, ag reader menu and inernal and he sub-menu ag keyfob. reader / and Eis he opion keyfob. o sub-menu and sub-menu o = Selecs iems and eners menus. iem. main menu. How The Inernal o navigae Tag Reader hrough he menu s. [] = Direcional buons. = Cancels iems, and moves o he ne c = Enables chime and displays addiional = NO - Press o move forward Conrol Panel Keypad iem when in maser he user manager mode Conrol menu Tag Area Panel (Where Keypad you. presen informaion a = Quick ei in a manager he = Quick log. menu. ei manager menu. b = BACK - Press o move backward when in he user your mode ag o arm/unse) b Moves Selecs backwards b = Moves iems o he backwards previous and menu o he eners previous menu menus. The Inernal = Tag YES Reader - Press o ener in a submenu or opion when in he user mode D iem. = Moves forward in he log, scrolls beween Tag Area Ready (Where LED you presen iem. ] = Press o move from one opion ino anoher opion while in a submenu opions c = Enables and chime eners c = and he Enables displays maser chime addiional manager menu. your ag o arm/unse) a = Press o quick ei he user menu from any main menu and displays addiional Alarm LED (wrien in capial leers) fp informaion = Used in he informaion o log. acivae in he FIRe/PA log. alarms. c = CANCEL - Press o move back from one programmable Ready LED opion o he previous opion. D = Moves forward Tamper LED D = in Moves he log, forward scrolls in beween [] he log, scrolls beween opions and = Direcional eners opions he maser buons. and eners manager he maser menu. Main menus are indicaed wih capial leers and Alarm end LED wih a quesion mark (?), for eample CHANGE CODES?. The sub-menus manager are menu. indicaed wih Faul LED fp = Selecs = Used o fp iems acivae = and Used FIRe/PA eners o acivae alarms. small leers and hey also end wih a quesion mark, for eample Learn codes/ags/keyfobs?. Programmable opions menus. FIRe/PA are indicaed alarms. wih small Tamper LED leers and do no finish wih quesion mark (?) bu Yes/No [] = Direcional Disarmed or oher LED opions are offered. [] buons. = Cancels iems, = Direcional and moves buons. o he ne he Inernal Tag Reader Faul LED = Selecs iems and = Selecs eners iems menus. iem in maser manager and eners menus.. In order o navigae in he menu sysem one has o answer o he quesions in he main = Cancels and sub iems, menus. The Eernal Tag Reader = and Cancels moves For iems, o eample, he and ne if he quesion is CHANGE Disarmed LED moves o he ne CODES. Pressing YES will bring you in he sub-menu Learn codes/ags/keyfobs?. iem in maser Pressing manager (YES) iem in maser menu will ake you manager menu. o he programmable The Inernal Tag Reader. opions of his submenu. Pressing NO will ake you ou of he individual opion, will move you up from your one sub-menu ag o he arm/unse) ne sub-menu or The Inernal Tag The Reader Tag Area (Where you presen back o he main menu. The Eernal Tag Reader Inernal Tag Reader Tag your Area (Where ag o Tag you arm/unse) Area presen (Where you presen LEFT GREEN LED: Saus indicaor Tag your Area ag (Where o arm/unse) your you ag presen o arm/unse) your ag o arm/disarm) (einguishes afer a couple of seconds) LEFT GREEN LED: Ready LED Ready Ready Ready LED LED (Ready LED o arm) Afer a valid RED ag LED: is This can be programmed by your Ready LED LEFT GREEN LED: Saus indicaor presened, (einguishes he engineer GREEN afer o a couple illuminae of seconds) when he alarm has Alarm LED Alarm Alarm LED (Shows LED alarms) LED LED will illuminae acivaed for eample. RED LED: This can be programmed by your Tamper LED Alarm LED indicaing he power Tamper LED engineer o illuminae when he alarm has Tamper Tamper LED (Shows LED amper alarms) saus. acivaed for eample. Faul LED Faul LED Aler/Pending Faul LED (Faul) LED (Shows sysem fauls) Disarmed LED Tamper LED Disarmed LED Disarm LED (Shows sysem disarmed) 4 The Eernal Tag The Reader Eernal Tag Reader The Eernal Tag Reader a = Quick ei manager menu. b = Moves backwards o he previous menu c = Enables chime and displays addiional D = Moves forward in he log, scrolls bewee opions and eners he maser manager menu. fp = Used o acivae FIRe/PA alarms. = Cancels iems, and moves o he ne iem in maser manager menu. Tag Area (Where you presen Disarmed LED Faul LED

5 C: Using he Keyfob make sure he ei door is closed properly Timed: Make sure you leave he building before he imer shown on he keypad epires The wireless keyfob has four buons ha may be Push programmed o se: Press for he specific push funcions: o se no acion, show saus, arm area, disarm area, lach oupu, imed oupu and PA alarm buon acivaion. insalled by your engineer o arm he sysem Locking he Keyfob SETTING USING A WIRELESS KEY-FOB All four buons on he keyfob may be locked o preven from a user accidenally pressing hem. Locking he keys on he keyfob is performed by pressing To se via any a key-fob. buons Press ha are he diagonal key wih one anoher a he same ime (LOCK & II or UNLOCK & I). The key-fob LED will sar o flash The RED LED will flash indicaing ha he fob has GREEN been locked. indicaing ha he sysem is To unlock, press boh buons ogeher again and saring he GREEN o se LED will flash indicaing ha he keyfob is now unlocked. Please wai arming wireless will be displayed on he keypad and he NOTE: When he keyfob is locked, all indicaions are also disabled. programmed area will begin o se. Buons To quick se, press he key again. The buons can be cusomised o operae as desired (programmed in he funcion Change Codes ). Below are eamples on how each buon can be Once se, he key-fob LED will programmed: illuminae RED indicaing ha he BUTTON = Programmed for Arm Area When pressed, one or more areas sysem will be is armed now se BUTTON = Programmed for Disarm Area. When pressed, one or more areas will disarmed. I BUTTON = Programmed for User Oupu. For eample when pressed, a gae can be opened. When pressed again, a gae can be closed. II BUTTON = Programmed for Saus LED. For eample when pressed, he sysem saus is shown RED = Armed, Page: 8 GREEN = Disarmed, AMBER = Faul. Quick Arming If one of he buons is programmed as Arm Area, he alarm sysem can be armed by he keyfob. The keypad will hen sar o coun down he ei ime (depending wha he ei mode is programmed by he engineer). Once he alarm panel is in his arming sage, i is possible o quick arm he sysem by pressing he same buon again; his will reduce he ime of arming and herefore making he sysem arm immediaely. The disarm LED on he keypad will urn off and a beep will be heard once he sysem has been armed and he RED LED on he keyfob will be illuminaed for a shor ime. 5

6 6 D: Arming he Enforcer Ener your code and deselec any area s ha are no o be armed*. *This will only be possible if Arm Area Choice is seleced as Yes in he funcion Learn User Codes/Tags/Keyfobs. If seleced as No hen all areas allocaed o he user code will arm. **The keyfob buons can be programmed in he funcion Learn User Codes/Tags/Keyfobs. Presen your ag and deselec any area s ha are no o be armed*. Press he arming buon on he keyfob** Enforcer32WETime02:53cEnerYourCode[*]ArmAreas[ABCD]PleaseWaiArmingWireless Arming[029]AreaAUser Code SopArming?[*]User CodeSopArming?[ABCD] Deselec he Area's no needed o be armed

7 7 *This will only be possible if Arm Area Choice is seleced as Yes in he funcion Learn User Codes/Tags/Keyfobs. If seleced as No hen all areas allocaed o he user code will disarm. **The keyfob buons can be programmed in he funcion Learn User Codes/Tags/Keyfobs. Press he arming buon on he keyfob** Enforcer32WEArmAreaAEnerYourCode[*]DisarmAreas[ABCD]Enforcer32WETime02:53c User Code Deselec he Area's o be disarmed E: Disarming he Enforcer Ener your code and deselec any area s ha are no o be disarmed*. Ener your code and deselec any area s ha are no o be disarmed*.

8 F: Arming / disarming wih he ag reader If you have a ag reader insalled, hen i will be possible o arm and disarm he alarm sysem using a ag. Disarmed Armed Disarmed Armed G: Open doors / Arm and Disarm (Enry Conrol) A ag reader can also be used o unlock enry doors. NOTE: If he Enforcer has failed o se, a faul will be displayed on he inernal ag reader or a fail o se sound will acivae on he eernal ag reader buzzer. 8 Disarmed Locked Armed Eernal Tag Reader Insrucions: Disarmed Locked Armed NOTE: If he Enforcer has failed o se, a faul will be displayed on he inernal ag reader or a fail o se sound will acivae on he eernal ag reader buzzer. Arming: Presen a valid ag o he reader, he GREEN LED will illuminae on he eernal reader, remove he ag, he door will unlock, hen presen he same ag wihin 10 seconds and he sysem will arm and he door will lock. Disarming: Presen a valid ag o he reader and hen remove i, he saus will be shown (he alarm symbol will illuminae indicaing he sysem is armed on he inernal reader and he RED LED on he eernal reader), presen he same ag wihhin 10 seconds again and he sysem will be disarmed, and he door will unlock. Access Conrol/Enry Conrol: The readers can be used also for opening doors only wihou he abiliy o arm and disarm. Please conac your insaller for more informaion on his feaure.

9 H: SMS Commands (GSM V9.2 or above only) If you have purchased he GSM version of Enforcer, i will allow you o send SMS commands via a mobile phone o be able o arm/disarm he panel remoely and ohers. See below he differen SMS commands available. NOTE: Any e message command o he Enforcer will need o sar wih a valid user code. NOTE: Te messages commands are no case sensiive ecep when he used oupus are acivaed. NOTE: If a e messages commands is no recognised by Enforcer i will send back o he user he wrong command. Arming via SMS e command Eample SMS command send: Descripion: Eample SMS command response: Arm A = User Code. Arm A = Will arm he Enforcer in Area A. Final Arm; Area A Arm ABCD = User Code. Arm ABCD = Will arm he Enforcer in Area ABCD. Final Arm; Area ABCD NOTE: If no areas are specified hen all areas will arm (defaul). In One Area Mode, he defaul will be Area A. Disarming via SMS e command Eample SMS command send: Descripion: Eample SMS command response: Disarm A = User Code. Disarm A = Will disarm Area A. Disarm; Area A Disarm ABCD = User Code. Disarm ABCD = Will disarm he Area ABCD. Disarm; Area ABCD NOTE: If no areas are specified hen all areas will disarm (defaul). In One Area mode, he defaul will be Area A. Arming wih inpus bypassed via SMS e command Eample SMS command send: Descripion: Eample SMS command response: Arm A Bypass = User Code. Arm A Bypass 4 = Arms Area A and will bypass inpu number Arm A Bypass Kichen = User Code. Arm A Bypass Kichen = Arms Area A and will bypass he inpu ha is called Kichen. Bypassing inpus via SMS e command Inpu Bypass; Area A Inpu 04 Force Arm: Area A Inpu Bypass; Area A Kichen Force Arm: Area A Eample SMS command send: Descripion: Eample SMS command response: Bypass = User Code. Bypass 6 = In he ne arming procedure, inpu number 6 will be bypassed Bypass Garage = User Code. Bypass Garage = In he ne arming procedure, he inpu called Garage will be bypassed. Inpu Bypass; Area A Inpu 06 Inpu Bypass; Area A Garage NOTE: The name of he oupu has o be one word and spelled eacly as wrien in he panel. For eample, Garage Door is no accepable. I has o be wrien as Garage-Door in he panel and he respecive command will be Garage-Door. 9

10 H: SMS Commands (GSM version only) - Coninued... Checking he Sysem Saus via SMS e command Eample SMS command send: Descripion: Eample SMS command response: Saus = User Code. Saus Area A Disarmed No Fauls Operaing he User Auomaion Oupus via SMS e commands 9999 UDL 9999= Engineer Code UDL = The Enforcer will make an ougoing daa connecion o he programmed PC1 number. 10 Area B Disarmed No Fauls Area C Disarmed No Fauls Area D Disarmed No Fauls Eample SMS command send: Descripion: Eample SMS command response: Oupu 1 On = User Code. User Oupu 1 urns on. OUTPUT 1 ON Oupu Garage-Door On = User Code oupu Garage-Door on = Turns oupu named as Garage-Door on Oupu Garage-Door Off = User Code oupu Garage-Door off = Turns oupu named as Garage-Door off. OUTPUT Garage-Door ON OUTPUT Garage-Door OFF NOTE: The user auomaion oupus can be also acivaed via he keypad or he keyfob. NOTE: The name of he oupu has o be one word and spelled eacly as wrien in he panel. For eample, Garage Door is no accepable. I has o be wrien as Garage-Door in he panel and he respecive command will be Garage-Door. Checking he User Auomaion Oupus saus via SMS e commands Eample SMS command send: Descripion: Eample SMS command response: Oupu 1 Saus = User Code. User Oupu 1 saus check. OUTPUT ON or OUPUT OFF Oupu Garage-Door Saus Changing a Mobile Number via SMS e commands Eample SMS command send: Descripion: Eample SMS command response: Change = User Code. Oupu Garage-Door saus check. OUTPUT Garage-Door ON or OUTPUT Garage-Door OFF NOTE: The name of he oupu has o be one word and spelled eacly as wrien in he panel. For eample, Garage Door is no accepable. I has o be wrien as Garage-Door in he panel and he respecive command will be Garage-Door. Sar Uploading/Downloading via SMS e command = User Code. Change number o number CHANGE Eample SMS command send: Descripion: Eample SMS command response: UDL = User Code. UDL = The Enforcer will make an ougoing daa connecion o he programmed PC1 number. No response as he panel is already conneced o he PC1 NO Response as he panel is already conneced o he PC1

11 I: Pyroni SMS Conrol Mobile Phone Applicaion There is a mobile phone applicaion (Android only) ha is available o download via our websie and will conrol cerain aspecs of your conrol panel from your mobile phone. Screenshos 1) Download he Pyroni SMS conrol applicaion from hp:// 2) Insall he applicaion on your mobile phone (making sure download from unknown sources is enabled in your securiy seings). 3) Open he applicaion, i will hen be insalled on your phone auomaically. 4) The icon o he lef will be displayed on your phone menu. Press he icon. 5) Once he sar up screen has loaded, you will see hree icons: Arm Area A, Disarm Area A and Panel Saus. These are he defaul operaions. 6) Press Seings and ener all your panel informaion such as panel name, (your engineer will know wha his is), panel inpu names (if you wish o ener your zone names on here). You can also choose he applicaion language and a password for securiy. NOTE: I is recommended ha a password is enered so only you will have access o arming/disarming your conrol panel ec. 7) Press Command o choose differen operaions o he PCX conrol panel ha you wish o operae. Press Add Command - a defaul Arm will be seleced, press he drop down bo o view all oher operaions ha are possible: Arming, disarming, arm wih bypass, bypass zones, conrol user oupu, oupu saus and sysem saus. You may also choose your own icon syle as well so he differen commands can be easily idenified. Once all changes have been made press SAVE and click back. 8) All icons and commands will he be displayed on your home screen which can hen be pressed and operaed. 11

12 Omiing Inpus J: Chime Feaure K: Personal Aack From Keypad L: Fire Alarm From Keypad The chime feaure can be used on door conacs o enable a chime sound when a door (inpu) is opened. This feaure can be se up by your insaller. To disable he chime on he keypad, close all doors and when c is displayed, press he c key, a capial C will be displayed, his will hen acivae he chime on any addiional keypads wih eension speakers insalled. If you wish o disable he chime alogeher press he c key again. NOTE: Chime should no be used on moion deecors as his will drain he baery. If an PA alarm is needed, press and hold boh he 1 and 7 keys or hold p for 3 seconds and a PA alarm will be generaed. Noe: The PA faciliy needs o be enabled by your engineer (eiher silen or full alarm) Please noe ha he key-fob can also be programmed o suppor a PA alarm. Please discuss his wih your engineer. If a fire alarm is needed, press and hold f for 3 seconds and a fire alarm will be generaed. Noe: The Fire alarm key need o be enabled by your engineer. Keypad Hold Up A N C E D F U N C T I O N S If an emergency alarm is needed, press and hold boh he 1 and 7 keys. A hold up alarm will be generaed. Noe: The Hold Up faciliy needs o be enabled by your engineer (eiher silen or full alarm) 2-Key HU and any duress codes programmed on he sysem by your engineer are no permied o send a signal o he Alarm Receiving Cenre under police regulaions in England, Wales or Norhern Ireland Please noe ha he key-fob can also be programmed o suppor a hold up alarm. 12 Please discuss his wih your engineer Chime Feaure 12.2 Omiing Inpus C H A P T E R 1 2 : A D V A N C

13 M: Maser Manager Menu Opions Bypass Inpus Operae User Oupus *Dae & Time *Learn User Codes, Keyfobs and Tags Review Log SMS Phonebook Walk Tes Bell Tes PC Connec Menu Allow Engineer Menu Block Remoe Arming Block UDL Ei Manager Mode Disables any sensor (inpu) on he sysem for he curren arming period. This feaure also disables amper alarms. Acivaes/deacivaes user auomaion oupus ha are used o acivae remoely he devices such as elecronic gaes, lighs ec. Programmes he dae and ime and enables he summerime auomaic adjusmen. Programmes he user codes, ags and learns keyfobs o he Enforcer 32-WE. The Review Logs funcion is used o view all operaional informaion of he alarm sysem, such as arming/disarming informaion, access conrol and alarm acivaions ec. If SMS eing is enabled, here will be up o 4 mobile numbers ha can be programmed o send SMS alarms. Please discuss his feaure wih your insaller if required. The Walk Tes funcion allows he esing of all programmed inpus on he alarm sysem. This funcion is used o ess he eernal siren (wired and wireless) and srobe. The conrol panel may be dialled ino, and programming informaion kep on a PC using he InSie UDL sofware. This funcion allows he conrol panel o dial a Pre-programmed PC elephone number (programmed by your engineer). This is usually used by your engineer during a mainenance call. If his funcion is enabled, he engineer will require auhorisaion from you before hey can access he engineer menu. Blocks any aemp a arming he sysem remoely via he upload/download sofware Blocks any aemp a dialling ino he sysem remoely via he upload/download sofware Eis he Manager Mode NOTE 1: Pressing he A key will ei he maser manager menu a any main menu opion above. NOTE 2: Make sure you change he defaul maser user code. *These feaures are needed o quickly se up he Enforcer. 13

14 14 Defaul Maser User Code: 1234BYPASSINPUTS?BypassInpu[-]OPERATEUSEROUTPUTS? BypassInpu[-]Inpu01ChooseanInpu:01o66 boperateuseroutputs?selecoupu[01]date&time? OupuOf OupuOn b SelecUserAuomaionOupu:[01]Oupu1-[30]Oupu30ShowCurenOupuSausTurnOupuOn/Of 1 Maser Manager Menu: Bypass Inpus 2 Maser Manager Menu: Operae User Auomaion OupusEnforcer32WETime02:53cEnerYourCode[*]BYPASSINPUTS?D N: Enering he Maser Manager Menu

15 15 3 Maser Manager Menu: Configure Dae & Time*DATE&TIME?Year(00-99)[07]Monh(1-12)[01]Day(1-31)[01]Hours(0-23)[23]Opions:[0]No[1]YesSummerTimeAdj?No[0]Minues(0-59)[31]CHANGECODES? b

16 16 LEARNUSERCODESKEYFOBS&TAGS?UserCodes/Tags/LearnKeyfobs?Empy[01]EnerUserCode[]ChangeMaserManagerCode?MaserManagerCode[*] UserTypeUser[0]UserInArea[ABCD]UserType:[0]User[1]ManagerUserArmOpionsDisarm/Arm[0]UserArmOpions:[0]Disarm/Arm[1]DisarmOnly[2]ArmOnly[3]NoneAreaArmChoiceNo[0]UserName_UserArmOpions:[0]Disarm/Arm[1]DisarmOnly[2]ArmOnly[3]NoneREVIEWLOG? UserInArea[ABCD]UserArmOpionsDisarm/Arm[0]AreaArmChoiceNo[0]UserName_AreaArmChoice:[0]No[1]YesAreaArmChoice:[0]No[1]Yes b PressCKeyoDELETEcode4 Maser Manager Menu: Change Codes (Configure user codes, learn ags and keyfobs)* 4.1 Change Codes: Configure User Codes Arm Area Choice: If seleced as Yes he user will be able o choose he area hey wish o arm afer hey have enered a user code or presened a valid ag. If seleced as No he conrol panel will auomaically arm all area s he keypad/code is assigned o.

17 Change Codes (configure proimiy ags)usercodes/tags/learnkeyfobs?empy[01]enerusercode[] UserTypeUser[0]UserInArea[ABCD]UserType:[0]User[1]ManagerUserArmOpionsDisarm/Arm[0]UserArmOpions:[0]Disarm/Arm[1]DisarmOnly[2]ArmOnly[3]NoneAreaArmChoiceNo[0]UserName_ AreaArmChoice:[0]No[1]Yes PressCKeyoDELETEagPresenagEnforcer Time 11:00am c Arm Area Choice: If seleced as Yes he user will be able o choose he area hey wish o arm afer hey have enered a user code or presened a valid ag. If seleced as No he conrol panel will auomaically arm all area s he keypad/code is assigned o.

18 18UserCodes/Tags/LearnKeyfobs?Empy[01]EnerUserCode[] UserName_SelecBuonBuon[1]SelecBuon:[1]BuonLOCK[2]BuonUNLOCK[3]BuonI[4]BuonI[5]BuonsLOCK+UNLOCK[6]BuonsI+I[7]BuonsLOCK+I[8]BuonsUNLOCK+I PressandHoldANYbuonfor5secondsunilLEDsflashBuonAcion[1]ShowSausBuonAcion:[0]NoAcion[1]ShowSaus[2]ArmArea[3]DisarmArea[4]OperaeOupu IfArmAreaorDisarmAreaUserInArea[A]IfOperaeOupuOupu[01]Oupu[ ]UserDefined1-30PressCKeyoDELETEcode 4.3 Change Codes (learn/configure keyfobs)

19 19 5 Maser Manager Menu: Review Logs (Even memory logs)reviewlog?panellog?smsphonebook? 01/0100:11:44AlarmSilencedUser01Access/CrlLog? RepeaforalEvensSarofLog c b 01/0100:11:44UseropenDoorUser01RepeaforalEvensSarofLog c Toobainmoreinformaiononheeven:Pressc Toobainmoreinformaiononheeven:Pressc

20 20 6 Maser Manager Menu: SMS PhonebookSMSPHONEBOOK?SMSNumber[01]WALKTEST? UserMobileDonouse b SMS Number [00]-[25] WALKTEST?WalkTesAreas[ABCD]BELLTEST? WalkTesInpusInpu01WalkTesInpu[01] b BELLTEST?TesingBel.PCCONNECTMENU? b 7 Maser Manager Menu: Walk Tes 8 Maser Manager Menu: Bell Tes NOTE: Number 1 is normally reserved for ARC communicaions. Numbers 2-25 is normally reserved for SMS messaging. Before you change his funcion, please consul your insaller.

21 21 9 Maser Manager Menu: PC Connec MenuPCCONNECTMENU?SelecPCodial[1]ALLOWENGRMENU?SelecOperaionConnecoPC[0]CalingRemoePCSelecOperaion:[0]ConnecoPC[1]TesDial[2]RMService[3]DaafromPC[4]DaaoPC[5]Diagnosics[6]Commissioning SelecPCoDial:[1]PCModem1[2]PCModem2[3]PCModem3[4]PCModem4 ballowengrmenu?alowengrmenu?yes[1]blockremotearming? b 10 Maser Manager Menu: Allow Engineer Menu

22 22 BLOCKREMOTEARMING?BlockRemoeArm?No[0]BLOCKUDL? BlockRemoeArm:[0]No[1]Yes b 12 Maser Manager Menu: Block UDL 11 Maser Manager Menu: Block Remoe ArmBLOCKUDL?BlockUDL?No[0]EXITMANAGERMODE? Block UDL: [0] No [1] Yes b This funcion will block any aemp made o arm and disarm he UDL sofware if enabled. This funcion will block any aemp made o dial ino he conrol panel o upload and download informaion if enabled.

23 23EXITMANAGERMODE?Enforcer32WETime0:25cBYPASS INPUTS? b BYPASSINPUTS?Enforcer32WETime0:25caPressheAkeyoeiManagermodefromanymainmenuiem(displayedincapialleers)OR13 Maser Manager Menu: Ei Maser Menu

24 O: Engineer Conacs and Table Alarm Company Dae of Insallaion Sie Reference Engineer Name Engineer Conac Number Insalled o Grade 2? Environmenal Class Yes / No II Oher Commens 24

25 P: Inpu Tables Wireless Inpus Inpu Name Inpu Areas Descripion

26 P: Inpu Tables Wired Inpus Inpu Name Inpu Areas Descripion 33 (RIX2) 34 (RIX2) 35 (RIX Address 0) 36 (RIX Address 0) 37 (RIX Address 0) 38 (RIX Address 0) 39 (RIX Address 0) 40 (RIX Address 0) 41 (RIX Address 0) 42 (RIX Address 0) 43 (RIX Address 1) 44 (RIX Address 1) 45 (RIX Address 1) 46 (RIX Address 1) 47 (RIX Address 1) 48 (RIX Address 1) 49 (RIX Address 1) 50 (RIX Address 1) 51 (RIX Address 2) 52 (RIX Address 2) 53 (RIX Address 2) 54 (RIX Address 2) 55 (RIX Address 2) 56 (RIX Address 2) 57 (RIX Address 2) 58 (RIX Address 2) 59 (RIX Address 3) 60 (RIX Address 3) 61 (RIX Address 3) 62 (RIX Address 3) 63 (RIX Address 3) 64 (RIX Address 3) 65 (RIX Address 3) 66 (RIX Address 3) 26

27 Q: User Tables User Name Code/Tag/Keyfob User Name Code/Tag/Keyfob User Name Code/Tag/Keyfob

28 R: Oupus Wired Oupus Lached / Timed Type Acion PGM1 (Onboard) STRB (Onboard) BELL (Onboard) PGM1 (ROX) PGM2 (ROX) PGM3 (ROX) PGM4 (ROX) PGM5 (ROX) PGM6 (ROX) PGM7 (ROX) PGM8 (ROX) PGM9 (ROX) PGM10 (ROX) PGM11 (ROX) PGM12 (ROX) PGM13 (ROX) PGM14 (ROX) PGM15 (ROX) PGM16 (ROX) Wireless Oupus Lached / Timed Type Acion BELL 1 STRB 1 BELL 2 STRB 2 28

29 S: Produc Informaion For elecrical producs sold wihin he European Communiy. A he end of he elecrical producs useful life, i should no be disposed of wih household wase. Please recycle where faciliies eis. Check wih your Local Auhoriy or reailer for recycling advice in your counry. When disposing of he produc and accessories, he baeries mus be removed and disposed of separaely in accordance wih he local regulaions. 29

30 T: Noes 30

31 T: Noes 31

32 2 EN :2006+A1:2009 EN :2009 EN :2008 EN :2005+A1:2008 Securiy Grade 2 Environmenal Class II Secure Holdings Pyroni House Braihwell Way Hellaby Roherham S66 8QY Websie: