LIMO LM Medical Series Version March 01, 2010 HIGH-POWER DIODE LASER
|
|
- Jonah Gibbs
- 6 years ago
- Views:
Transcription
1 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) , 940, Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 5 (<4) 3 Temperature drift of λ 4 (nm/k) ~0.3 - ~0.4 data core diameter (µm) 200 Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.9 > 1.7 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC ) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:
2 Product name identification: LIMO.F -DL - Power core diameter Wavelength Wavelength Tolerance T0=±10nm M0= no ,976,977, 978,979,980 M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO20-F200-DL980-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurements are made with a LIMO reference fibre 200/280 µm, length 1.5 m, and non AR coated. Copyright 2008 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:
3 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 5 (<4) 3 Temperature drift of λ 4 (nm/k) ~0.28 data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 10 Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.9 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:
4 Product name identification: LIMO.F -DL - Power core diameter ,806,807, 808,809,810, ,806,807, 808,809,810, Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO40-F400-DL808-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2008 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:
5 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 5 (<4) 3 Temperature drift of λ 4 (nm/k) ~0.28 data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 10 Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.9 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:
6 Product name identification: LIMO.F -DL - Power core diameter ,806,807, 808,809, ,806,807, 808,809,810 Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO40-F200-DL808-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2010 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:
7 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) 915, 940, Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 7 (<6) 3 Temperature drift of λ 4 (nm/k) ~ data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 6 Typical efficiency (%) Typical slope efficiency (W/A) 0.9 Operation voltage (V) < 1.7 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:
8 Product name identification: LIMO.F -DL - Power core diameter , 940, 975,976,977, 978,979, , 940, 975,976,977, 978,979,980 Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO60-F400-DL980-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2010 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:
9 SMA905 Plug & Play connector for optical fibres Compact dimensions Passively cooled 2 temperature s (NTC/PT100) Optical data 1 CW nominal output power (W) Centre wavelength λ (nm) 915, 940, Tolerance of λ (nm) ± 10 (± 3) 3 Spectral width (FWHM) (nm) < 7 (<6) 3 Temperature drift of λ 4 (nm/k) ~ data core diameter (µm) Numerical aperture optic connector SMA905 Electrical data Typical operation current (start of lifetime) (A) Max. Operation current (start of lifetime) (A) Max. Operation current (end of lifetime) (A) Typical threshold current (A) 5 Typical efficiency (%) Typical slope efficiency (W/A) Operation voltage (V) < 1.7 Reverse voltage 0 Thermal conditions Diode operation temperature 5 ( C) Storage temperature ( C) Other specifications Expected lifetime 6 (hours) 20,000 RoHS 2002/95/EC and CE compliant YES Dimensions of head (connectors not included) (mm) 109 x 25 x 37 Weight (g) Optical 25 C heat sink temperature, 2 Other wavelength on request, 3 optional, 4 Depending on wavelength, 5 Measured by NTC/PT100 at temperature measurement hole defined in drawing, 6 According ISO 17526:2003(E); Optional accessories beam beam output power (mw) > 0.7 beam wavelength (nm) 635 beam voltage (V) 4-5 beam current (ma) < 120 Monitor Operation voltage (V DC) 5 Monitor signal (V) voltage (V) 12 1 current (ma) < type PNP Telephone: Fax: sales@2000.co.uk website:
10 Product name identification: LIMO.F -DL - Power core diameter ,940, 975,976,977, 978,979,980, ,940, 975,976,977, 978,979,980, 981 Wavelength Wavelength Tolerance T0=±10nm M0= no T3=±3nm M3= P0=no P2 = FKS0= no FKS1= fibre Accessories LIMO-SMA905-F, 1.5m or 3m Laser Diode Driver and TEC-cooler Different beam shaping optics (focussing, collimating, fibre-fibre) available Installation service and personal introduction on request Turn-key systems available Customized modules and fibres on request Example: LIMO40-F400-DL980-T0M3P0FKS0 This is a class IV product regarding CDRH regulations and a Laserklasse 4 product regarding DIN:EN The light emitted from this is invisible and/or visible and may be harmful to the human eye. Avoid looking directly into the, into the collimated beam along its optical axis, or directly into the fibre when the device is in operation. Considerations in Safety and Operation Operating the outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. Output powers in excess of specification will accelerate device aging. Operation at higher temperatures will accelerate device aging. ESD PROTECTION Electrostatic discharge is the primary cause of unexpected failure. Take extreme precaution Do not use thermal contact paste! LIMO provides appropriate carbon foil to prevent ESD. Use wrist straps, grounded work surfaces and rigorous antistatic techniques when handling s. All data provided are typically measured with a heat sink temperature of 25 C. All measurement s are made with a LIMO reference fibre 200/280 µm or 400/480 µm, length 1.5 m, and non AR coated. Copyright 2008 LIMO GmbH. All rights reserved. All LIMO products are patent pending. Subject to change without notice. March 2010 Telephone: Fax: sales@2000.co.uk website:
LIMO Line Laser System - PEX High Power Diode Laser System for Industrial Applications
General Description: Flat Panel Display The laser system is engineered to generate a homogeneous line of 80 mm x 0.2 mm. Componets: - 9x Laser modules - 9x Fibres - Beam Shaping Module - High power laser
More informationUp to 200 mw Uncooled 980 nm Pump Modules. TO T13 Series
Up to 200 mw Uncooled 980 nm Pump Modules TO T13 Series www.lumentum.com Data Sheet The Lumentum uncooled ultra-small form factor TO pump laser - T13 revolutionary chip and packaging design significantly
More information600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption. S35 Series
600 mw Fiber Bragg Grating Stabilized 14xx nm Pump Modules with Ultra-Low Power Consumption S35 Series www.lumentum.com Data Sheet The Lumentum S35 series 14xx nm, Laser Diode pump is wavelength selected
More informationBRIGHTBOX-E1 LASER DIODE ENGINE
0 BRIGHTBOX-E1 BRIGHTBOX-E1 LASER DIODE ENGINE 1 GENERAL INFORMATION 2017 OPI Photonics S.R.L. All rights reserved. OPI Photonics S.R.L. reserves the right to make changes to this document at any time
More informationFAP 800-LB Series Long-Bundle Fiber Array Packages
Coherent Diode Lasers FAP FAP 8-LB Series Long-Bundle Fiber Array Packages Fiber Array Packages (FAP ) from Coherent are the highest quality fiber-coupled diode lasers in the industry, offering you the
More information6W 808nm Uncooled Multimode Laser Diode Module
6W 808nm Uncooled Multimode Laser Diode Module BMU6-808-02-R01 Features: High output power of min. 6W 0.22NA 200μm core multimode optical fiber Hermetically sealed 2-pin package Floating anode/cathode
More informationFAP 600 Series. Highest quality fiber-coupled diode laser bars in the industry.
FAP 600 Series Highest quality fiber-coupled diode laser bars in the industry. Measurement tools for this laser: FieldMaster-GS SMA-Type Connector (P/N 33-1413-000) LM-150FS HTD (P/N 33-7873-000) Fiber
More informationModel 3955 DFB 1550nm Laser in TO-can
Model 3955 DFB 1550nm Laser in TO-can Applications Video signal distribution in HFC and FTTx nodes CWDM Signal distribution in L-band and wireless remoting links High linearity, low power fiber links Features
More information10W 9xxnm Uncooled Multimode Laser Diode Module
10W 9xxnm Uncooled Multimode Laser Diode Module BMU10A-9xx-01/02-R Features: High output powers of 10W 0.15NA or 0.22NA 105μm core multimode optical fiber Hermetically sealed 2-pin package Floating anode/cathode
More information1999PLU. Active Components Pump Laser Modules. Key Features. Applications. For more Info
1 Active Components s Key Features Up to 300 mw operating power Extended operating temperature range (5 C to +75 C) Fiber Bragg Grating (FBG) on PMF pigtail Telcordia GR468CORE qualified RoHS compliant
More informationML-T-1550-FP-2G5 SERIES TECHNICAL SPECIFICATION
Document type: Document number: Version: Product specification TBD A1 Document name: ML-T-1550-FP-2G5 SERIES TECHNICAL SPECIFICATION Author: Reviewer: Approver: Release date: Pages: Sippe Savpe Uuspe 12-Apr-05
More informationRoHS COMPLIANT 2002/95/EC
Superlum Broadband Light Sources cblmd-series (2nd Generation) Compact Broadband Light Technical Product Specification Document Number SL.3328.00.000D3 June 2017 Revision 001 ATTENTION ELECTROSTATIC SENSITIVE
More informationGenesis MX STM-Series
Genesis MX STM-Series TEM00 Visible OEM and End-User OPS Laser Systems Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enable by low noise, visible true CW lasers.
More informationD571-Type Digital, 1.5 µm Uncooled DFB Laser Module
D571-Type Digital, 1.5 µm Uncooled DFB Laser Module Applications Long-reach SONET OC-3/STM-1, OC-12/STM-4 systems Telecommunications Secure digital data systems Benefits The low-profile D571-type laser
More information976nm Laser Module Stabilized with Narrow-Bandwidth Grating
976nm Laser Module Stabilized with Narrow-Bandwidth Grating Features: The II-VI Laser Enterprise single-mode laser module with narrow-bandwidth grating has been designed to provide the stringent noise
More informationA Global Laser Brand. Gated Cameo
A Global Laser Brand The is a miniature laser diode module that has a threaded barrel for easy bulkhead mounting which ensures good thermal contact between module and heat sink. This new concept in laser
More informationSpectraTec X. Multi- λ Laser Light Source BLUE SKY RESEARCH WAVELENGTHS
Multi- λ Laser Light Source BLUE SKY RESEARCH Up to four individual laser wavelengths One single mode PM fiber output Ultra-stable power output Compact : 165mm x 125mm x 34mm Integrated control and drive
More informationA Global Laser Brand. Versatile Module
A Global Laser Brand Versatile Module The Versatile Module The VM (Versatile Module) from Imatronic provides a high quality and cost effect OEM solution to a wide range of applications including Machine
More informationCooled Dual Chip 14pin Butterfly 980nm Pump Laser Module. Applications
Cooled Dual Chip 14pin Butterfly 980nm Pump Laser Module Features Two chips utilizing one carrier, one package and one TEC High output power, up to 600mW kink free Combined power of >1.0W with variable
More informationHigh Power Uncooled mbtf 980nm Pump Laser Module. Applications
UM96Z***-7* High Power Uncooled mbtf 980nm Pump Laser Module Features Up to 500mW kink-free power over full operating temperature range Operating temperature range from -5 C to +75 C (case) Polarization
More informationMonsoon Series. Data Sheet. High Power Laser Diode Bar on Micro-Channel Cooler and Multi-Bar Modules. Features:
Monsoon Series High Power Laser Diode Bar on Micro-Channel Cooler and Multi-Bar Modules Features: Mounted 10mm laser diode bar, various standard bar configurations (custom bar configurations available
More informationUltra Low Noise Laser 1550nm
Ultra Low Noise Laser 1550nm User Manual Version 1.01 Last Updated 07/13/17 www.apichip.com T: 310 642-7975 F: 310 642-7829 Page 1 of 10 Revision Table Revision Description 1.0 Initial release 1.01 Cable
More informationGenesis CX SLM-Series
Genesis CX SLM-Series Single Frequency UV and Visible OEM and End-User OPS Laser Systems Applications such as spectroscopy, interferometry, and holography require single-frequency lasers with narrow linewidths
More informationUncooled mini-dil 980nm Pump Laser Module. Applications
LU96Z***-7* Uncooled mini-dil 980nm Pump Laser Module Features Up to 300mW kink-free power over full operating temperature range Operating temperature range from -5 C to +75 C Polarization maintaining
More informationThread Mountable Cameo Laser Diode Module
Thread Mountable Cameo Laser Diode Module Thread Mountable Cameo The Cameo is a unique, versatile, high quality industrial laser diode module widely used in alignment applications. Available in two models,
More informationStingRay and BioRay FEATURES
StingRay and BioRay Coherent s high-performance laser in a compact module, measuring only 19 mm in diameter, is the StingRay and BioRay product families. Modular design using the industries premier laser
More informationSingle Photon Counting Module
Description Laser Components COUNT series of s has been developed to offer a unique combination of high quantum efficiency, wide dynamic range and ease of use for photon counting applications. Combining
More informationCoherent Magnum II. Structured Light Pattern Generating Laser FEATURES
Coherent Magnum II Structured Light Pattern Generating Laser Coherent s Magnum II structured light laser is a high-power line generator developed for the most demanding industrial applications. It is available
More informationDescription. Applications
3.5x3.5 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features White SMD package, silicone resin. Low thermal resistance. Compatible
More information980nm Pump Laser Module - Grating Stabilized, 300mW LC94
980nm Pump Laser Module - Grating Stabilized, 300mW LC94 These lasers are designed as pump sources for Erbium-Doped Fiber Amplifier (EDFA) applications. Processes and techniques of coupling the fiber to
More informationDescription. Kingbright
T-1 (3mm) SOLID STATE LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-7104GD-12V Green Features Description Low power consumption. Popular T-1 diameter
More informationLaser & Peltier - TEC - Driver
Laser & Peltier - TEC - Driver Type: ds11-la3.5v48-pa08v24-o8007-v0-598 Laser max.: 3.5A - 48V TEC max.: 8A - 24V (max. 150W) In: 110..230VAC - Analog or Digital Modulation - Bias Current option - Pilot
More informationHigh Power Uncooled mini-btf 980nm Pump Laser Module LU96***E-10R
High Power Uncooled mini-btf 980nm Pump Laser Module LU96***E-10R Features: Up to 500mW kink-free power over full operating temperature range Operating temperature range from - 5 C to +75 C (case) Polarization
More informationUNION OPTRONICS CORP.
Features 1. Very narrow perpendicular divergence angle 2. High temperature operation 3. Standard optical power output:10mw (CW) 4. TO-56 (ψ5.6mm) Packaged, with Pb-free window cap. 5. Built-in Photo Diode
More informationNL-02 NL-02. The NL-02 InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement.
www.lightware.co.za info@lightware.co.za The InoxLaser uses time-offlight laser technology for continuous non-contact distance or level measurement. Able to measure to any solid surface, at any angle,
More informationSPEC NO: DSAO3608 REV NO: V.2B DATE: SEP/02/2015 PAGE: 1 OF 6 APPROVED:
1x1mm SMD CHIP LED LAMP (0.2mm Height) ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KPGF-1011GBRC-120 Features 1.0mmX1.0mm SMD LED, 0.2mm thickness.
More informationDescriptions. The Hyper Red source color devices are made with Low power consumption.
T-1 3/4 (5mm) FULL COLOR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-154A4SURKQBDZGW Features Descriptions Uniform light output. The source
More informationCC-M Multimode Cool & Control Module
CC-M Multimode Cool & Control Module A module to drive current and control temperature of high-brightness laser diodes up to 120W The Multimode Cool & Control (CC-M) module allows to control external single
More information3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP. Descriptions. Features. Package Dimensions
3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APFA3010LSEEZGKQBKC Features 3.0x1.5x1.0mm right angle SMD LED,
More informationic-tl6 BLCC Point Source LED
Rev A1, Page 1/6 FEATURES High brightness Ultra Red LED Glass cover High temperature range -40 to 125 C SMD 1206 LED Package APPLICATIONS Illumination for high resolution optical encoder, PSDs and optical
More informationDescriptions. the LEDs. Kingbright
T-1 3/4(5mm) BLINKING LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-56BHD Bright Red Features Descriptions T-1 3/4 package. The Bright Red
More information300W 1.5kW, QUBE Fiber Lasers
Technical Specification 300W 1.5kW, QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 3 1.5 POWER DISTRIBUTION 3 1.6 WATER COOLING
More informationUV-NIR LASER BEAM PROFILER
- Technical Data - CCD-1201 CCD-2301 CCD-2302 Standard Series Standard Series Standard Series SENSOR DATA Format: 1/2 2/3 2/3 Active area (without cover glass): 6.5mm x 4.8mm 9.0mm x 6.7mm 8.5mm x 7.1mm
More informationSurvival Laser SL-VPB Laser Parts Bundle Assembly & Operation Instructions
Survival Laser SL-VPB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY in
More information5.0X6.0mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
5.0X6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA5060ZGS/E Green Features Single color. Suitable for all SMT assembly
More informationDescriptions. The Super Bright Red source color devices are made With built-in blinking IC.
T-1 3/4(5mm) BLINKING LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-56BSRD-B Super Bright Red Features Descriptions T-1 3/4 package. The Super
More informationDescriptions. Applications
3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535QB25Z1S Blue Features White SMD package, silicone resin. Low thermal
More informationLASERS FOR ANALYTICAL INSTRUMENTATION
LASERS FOR ANALYTICAL INSTRUMENTATION CW Lasers (Broad and Narrow Spectrum) Nanosecond SLM Lasers Accessories ADVANTAGES One size One control interface One voltage (+5 VDC) One software Many wavelengths
More informationLASER SENSOR. Series LAS-T5 and LAS-T. Key-Features:
LASER SENSOR Series LAS-T and LAS-T Key-Features: Content: Technical Data...2 Technical Drawing...3 Teach-In - Diagrams...3 Order Code... measurement ranges from 4 to mm linearity up to ±2 µm resolution
More informationpanasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes.
1123 PHOTO PHOTO PARTICUR Type Edge Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.1593~ guide... P.1021~ General precautions... P.1595 Conforming to FDA regulations
More informationLaserLyte-Flex Red & Green Alignment System
LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly
More information1500V - Vacuum Rated
Preliminary 8/20/2008 Mercury Digital Output Encoder System Installation Manual and Reference Guide 1500V - Vacuum Rated Customer Controller Vacuum Wall Manual No. IM-M1500V Rev S7 Introduction MicroE
More informationCUBE. Diode Laser System. Superior Reliability & Performance
Features Compact and modular OEM design Complete CDRH safety features for scientific and laboratory use TEC temperature-stabilized and conductively cooled through baseplate Analog and digital modulation
More informationDatasheet. Dragon1IR PowerStars. LED Solutions. ILH-ID01-xxxx-SC201-xx series. Product Overview. Applications. Technical Features:
Datasheet Osram Oslon LEDs employed Dragon1IR PowerStars LED Solutions ILH-ID01-xxxx-SC201-xx series Product Overview Dragon1IR PowerStars employ the new Osram Opto Semiconductors Dragon Infrared LEDs.
More informationCinCam CCD - Technical Data -
- Technical Data - SENSOR DATA CCD-1201 CCD-1301 CCD-2301 CCD-2302 Format: 1/2 1/3 2/3 2/3 Active area: 6.5mm x 4.8mm 4.8mm x 3.6mm 9.0mm x 6.7mm 8.5mm x 7.1mm Number of pixel: 1388 x 1038 (1.4MPixel)
More informationLaser Diode Controller Instruction Manual
Russia, Moscow Tel. \ fax: (495) 333-93-01 www.nolatech.ru nolatech@mail.ru DLC-200 LD&TEC CONTROLLER Laser Diode Controller Instruction Manual Please read this Instruction Manual before using the unit.
More informationSPEC NO: DSAO1263 REV NO: V.1B DATE: JAN/23/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
0.65X0.35mm SMD CHIP LED LAMP (0.2mm Height) PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KPG-0603PBC-TT-5MAV Blue Features 0.65mmX0.35mm
More information5.0mm x 6.0mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
5.0mm x 6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF5060QBFSURZGS Features Chips can be controlled separately. Suitable
More information3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF3529LSEEZGKQBKS Features Outstanding material efficiency. Low power
More informationDiode Laser System. -with integrated water cooled Diode laser up to 400W optical output power
Type: dst11-t19xx-ho -with integrated water cooled Diode laser up to 400W optical output power The product series dst11-t19-ho combines the features and reliability of OsTech Laser- and TEC controllers
More informationOSLON IR 72 PowerFlood
OSLON IR 72 PowerFlood ILF-IO72-xxxx-SD40 series Product Overview At the heart of each Flood are 72 OSRAM IR OSLON Black Series which is today s smallest infrared LED with more than one watt of optical
More informationSLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules
SLD-mCS/sCS-series Miniature High Power Broadband Light Source Modules Technical Product Specification Document ID: SL.RD.01.001.170215 March 2017 Revision: 002 ATTENTION ELECTROSTATIC SENSITIVE DEVICES
More informationModels 1417 and 1437 User s Manual. High-Speed Photodetector Modules
Models 1417 and 1437 User s Manual High-Speed Photodetector Modules Handling Precautions The detector is sensitive to electrostatic discharges and could be permanently damaged if subjected even to small
More informationSafety. module carry a Class 4 Laser rating it emits invisible laser radiation(1064 central emission
Safety Please read this user manual carefully before operating the YDFLP fiber laser. It provides essential information regarding safety, product operation, and other necessary reference information. For
More informationOTEB-CO-B Series. Booster EDFA OPERATING MANUAL
OTEB-CO-B Series Booster EDFA OPERATING MANUAL 24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000533 Rev X6 E-Mail: sales@olsontech.com 27 Apr 2010 TABLE OF CONTENTS
More informationSingle Photon Counting Module COUNT blue -Series
Single Photon Counting Module COUNT blue -Series Description Laser Components COUNT blue series of Single Photon Counting Modules has been developed to offer a unique combination of high quantum efficiency,
More informationL-iC-282. Tunable White Linear LED Module, L-iC Series. 450 ma, 14.9 V. Electrical specifications. Lifetime specifications
L-iC-282 Tunable White Linear LED Module, L-iC Series 280 mm Tunable White module, adjustable colour temperature between 2700K and 6500 K High efficacy up to 165 lm/w at Tc = 50 C Accurate initial colour
More informationLASERS FOR ANALYTICAL INSTRUMENTATION
LASERS FOR ANALYTICAL INSTRUMENTATION CW Lasers (Broad and Narrow Spectrum) Nanosecond SLM Lasers Accessories ADVANTAGES One size One control interface One voltage (+5 VDC) One software Many wavelengths
More informationDescriptions. Applications
3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535SEL1Z1S Hyper Orange Features White SMD package, silicone resin. Low
More informationSurvival Laser SL-001.4PB Laser Parts Bundle Assembly & Operation Instructions
Survival Laser SL-001.4PB Laser Parts Bundle Assembly & Operation Instructions WARNING: READ ALL INSTRUCTIONS AND THE ENCLOSED SAFETY PRECAUTIONS BEFORE ASSEMBLY AND USE Assemble and use these parts ONLY
More informationRoHS COMPLIANT 2002/95/EC
Document ID: SL.QC... May Revision: ATTENTION ELECTROSTATIC SENSITIVE DEVICES RoHS COMPLIANT /95/EC Page of 9 Contents Product Description / Applications / Features... Mechanical specification... Electrical
More informationF A B R Y - P E R O T L A S E R D I O D E S, P I G T A I L E D B U T T E R F L Y P A C K A G E
FABRY-PEROT LASER DIODES, PIGTAILED BUTTERFLY PACKAGE Integrated TEC Element FC/APC Connector Central Wavelength Between 785 nm and 2000 nm Application Idea Laser Diode with CLD1015 Mount FPL1009S 1550
More informationTurnkey Tabletop CW Laser Drive Module Part #LN-WLxx-RIN-Pxx
Ver 3, 9-3-2018 Product Specification 5800 Uplander Way Culver City, CA 90230 Tel: (310) 642-7975 sales@apichip.com www.apichip.com Turnkey Tabletop CW Laser Drive Module Part #LN-WLxx-RIN-Pxx PRODUCT
More information405 nm Diode Lasers. 14-pin BF, D-type OEM Module & Turn-key Systems. 405 nm Single-Mode Wavelength Stabilized Diode Lasers
405 nm Diode Lasers 14-pin BF, D-type OEM Module & Turn-key Systems RPMC s proprietary Single-Mode Spectrum Stabilized Laser features high output power with ultra-narrow spectral bandwidth and a circularized
More informationSUBMINIATURE SOLID STATE LAMP. Features. Descriptions. Package Dimensions
SUBMINIATURE SOLID STATE LAMP Part Number: AM2520SRC03 Super Bright Red ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Subminiature package. Gull wing lead.
More informationView. Angle 2Ө 1/2 ( ) Min.* Typ.* Typ. UVTOP355-FW-TO39
UVTOP355 v 2.1 20.09.2013 Description UVTOP355 is a series of AlGaN based deep UV-LEDs with a typical peak wavelength of 365nm and optical output power of 480-800 µw. It comes in hermetically sealed TO39
More informationSPEC NO: DSAJ9211 REV NO: V.6B DATE: SEP/06/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED:
T-1 (3mm) SOLID STATE LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP7104VW1C White Features Low power consumption. Popular T-1 diameter package.
More information3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KA-3528ZGS Green Features Single color. Suitable for all SMT assembly
More informationMultimode Laser-532 Installation and Operation Manual
Multimode Laser-532 Installation and Operation Manual For Products: Model LASER-532-IP-LAB Document: 000-31000-010-02-201503 WARNING Protective Eye Wear Should Be Worn When Using This Instrument - Intense
More information0603 SMD LED VAOL-S6SDRC C
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
More informationLaser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly
Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators 48TE, 48-0, and 44TE, Laser Diode Base Unit 44TE LD Collimators Types 48TE, 48-0 and
More informationChip LEDs with Bi-Color(Multi-Color)
Features: Package in 8 mm tape on 7 diameter reel. Compatible with automatic equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Description: The 19-22 SMD Taping
More informationJenLas D2.x. Disk Laser. Installation Instructions
LASERS & MATERIAL PROCESSING I OPTICAL SYSTEMS I INDUSTRIAL METROLOGY I TRAFFIC SOLUTIONS I DEFENSE & CIVIL SYSTEMS Disk Laser JenLas D2.x Installation Instructions JENOPTIK l Lasers & Material Processing
More informationLX-562A. Linear LED Module, LX Series. 450 ma, 62.7 V. Electrical specifications. Lifetime specifications. Operating Conditions and Characteristics
LX-562A Linear LED Module, LX Series High lumen output 560 mm linear module, very high efficacy up to max. 179 lm/w at Tc = 65 C Extremely homogenous light distribution, pitch only 6,4 mm between single
More informationDiamond FLQ-Series. Q-Switched Fiber Lasers FEATURES & BENEFITS
Series Q-Switched Fiber Lasers The Coherent Series is a 1 μm pulsed laser delivering 1 mj pulse energy with a fast turn-on time and high peak power (up to 10 kw) over a wide range of repetition rates to
More informationSLD-CS-series Compact High Power Broadband Light Source Modules.
Superlum Broadband Light Sources SLD-CS-series Compact High Power Broadband Light Source Modules. Technical Product Specification Document ID: SL.RD.04.002.150508 December 2015 Revision: 002 ATTENTION
More information5.0mm x 5.0mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions
5.0mm x 5.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5051XQR412ZXS-N1 Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Suitable for all SMT assembly and solder
More information3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAA3528SURKZGQBDS Features Suitable for all SMT assembly and solder process.
More informationMDM 011-Z1 Regen Resistor
MDM 011-Z1 Regen Resistor Date of creation: 10.04.2017 Version date: 10.04.2017 Article number: 09-402-011-Z1-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: 06274/4321 Fax: 06274/4321-18
More informationLED-Illumination with Control Unit Ident.-No
A HAAG-STREIT COMPANY MÖLLER-WEDEL OPTICAL GmbH, Rosengarten 10, D-22880 Wedel with Control Unit Ident.-No. 773 190 01 Valid from Hardware / Software Rev. / SN 1.0 IDENT.-NO. 217 321 09 Document Version
More informationMercury Manual No. IM-M1000 Rev G
Mercury 1000 Analog Output Encoder System Installation Manual and Reference Guide Manual No. IM-M1000 Rev G Introduction MicroE Systems was founded to advance encoder technology to a level never before
More informationDescription. The Hyper Red device is based on light emitting diode chip Suitable for all SMT assembly and solder process.
5.0mm x 5.0mm FULL-COLOR SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KAAF-5050RGBS-13 Features Description Chips can be controlled
More informationBridgelux Vero 13 Array Series. Product Data Sheet DS31
Bridgelux Vero 13 Array Series Product Data Sheet DS31 BXRC-27x2000 30x2000 35x2000 40x2000 50x2000 Introduction Vero Vero represents a revolutionary advancement in chip on board (COB) light source technology
More informationLTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR44 - White Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 3 / 35 12 Volt Applications Automotive Indoor
More informationDigiPot Software Configuration Menu
C Option Centers the beam axially with the laser module s housing Available for the following modules: PM, PMT, SPM, & SPMT D Option Settings stored in nonvolatile memory Works with customer-supplied computer
More information3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KAA-3528RGBS-11 Features Suitable for all SMT assembly and solder process.
More informationLaser Safety (Interlock) Shutter / X-RAY Shutter
Laser Safety (Interlock) Shutter / X-RAY Shutter EOP-SH-20 1 FEATURES AND ADVANTAGES Integrated return spring Model SH-10: 0.5" (13mm) aperture Model SH-20: 1" (25mm) aperture, larger optional Small size
More informationCOBRA Slim Linescan Illuminator
COBRA Slim Linescan Illuminator Key Features Design: Slim and compact Field adjustable: focussing distance and diffusers Chip-on-Board: Extreme brightness and high uniformity Crystal Clear Line Scan Images
More informationProduct Data Sheet DS32 BXRC-27x x x x x4000
Bridgelux Vero 18 Array Series Product Data Sheet DS32 BXRC-27x4000 30x4000 35x4000 40x4000 50x4000 Introduction Vero Vero represents a revolutionary advancement in chip on board (COB) light source technology
More informationA Global Laser Brand. LDM150, Sigma, LDM115, LDL175, LCG115 & LLM115
A Global Laser Brand LDM150, Sigma, LDM115, LDL175, LCG115 & LLM115 Imatronic is a family of industry-standard laser diode modules from Global Laser. The ruggedised metallic housing of Imatronic lasers
More information