GRADATION HEAVY DUTY SIEVE SHAKER MANUAL SIEVE SHAKER ECONO SIEVE SHAKER MODELS DESCRIPTION POWER STANDARDS MODELS DESCRIPTION STANDARDS
|
|
- Elfreda Barrett
- 6 years ago
- Views:
Transcription
1 58 GRADATION HEAVY DUTY SIEVE SHAKER The G2127 Heavy Duty motorized sieve shaker holds up to 10 full height 2" deep, 20 half height 1" deep, or /8" deep sieves, plus pan and cover. 3" and 5" sieves can also be tested with the G2125 adapter ordered separately. The shaker has a three way shaking action. Each revolution imparts a horizontal and vertical movement and a jolting action. The platform moves side to side with a jolt at each change of direction, plus a slight upward movement. This creates a quick efficient movement and separation of material. The unit is designed with Heavy Duty steel parts and there are no chains, belts, or flywheels, to wear out, which minimizes downtime and results in a longer lasting shaker. MODELS POWER STANDARDS G2127 HEAVY DUTY SIEVE SHAKER, 8" & 12" SIEVES ASTM C-136 MANUAL SIEVE SHAKER This sieve shaker is specifically designed for portable use without an electrical power supply. Rapid positive sieving action is produced by turning the hand crank at a steady rate. The unit is lightweight, only 37 lbs, and transports easily. The shaker is for use with 8" sieves and can hold 8 full height or 16 half height sieves plus pan and cover. MODELS STANDARDS G2101 MANUAL SIEVE SHAKER ASTM E-11 / AASHTO T-27, M-92 ECONO SIEVE SHAKER This 8" sieve shaker is a budget model that is widely accepted by state transportation departments for highway materials testing. The unit produces a lateral back and forth motion combined with up and down and tilting motions to cause the test material to travel in an orbit around the testing screen. The tester holds 6 full height or 13 half height sieves and pan. The unit has a 15 minute timer with stop and a hold feature for continuous running. The shaker comes in 110V/60Hz (G2111) and 220V/50Hz (G2112) models MODELS POWER G2111 ECONO SIEVE SHAKER G V / 50 Hz
2 GRADATION 59 PORTABLE SIEVE SHAKER The G2113 & G2114 Portable Sieve Shaker is ruggedly constructed and its lightweight design is ideal for easy transportation for field tests. The shaker is designed for use with 8" sieves and is recommended for testing applications requiring materials 100 mesh and larger in size. The shaker has a capacity of 7 full-height or 15 half-height 8" dia sieves with pan and cover. The shaker has a built-in 30 minute timer and is operated by a 1/4 HP motor. MODELS POWER G2113 G2114 PORTABLE SIEVE SHAKER SIEVE SHAKER, FOR 3", 5", 8" SIEVES The G2121 & G2122 motorized 8" sieve shaker holds 10 full height or 18 half height sieves with pan and cover. The units have a three way shaking action. Each revolution imparts a horizontal and vertical movement plus a light tapping action. The platform moves side to side and there is a tap at each change of direction, plus a slight upward movement. This creates efficient movement of material across sieves and fast separation. The unit has spring loaded sliding holders and a built in 30 minute timer. The G2105 manual sieve shaker is similar to motorized except it is operated by a hand crank. Adapters for 3" and 5" sieves are included. MODELS POWER STANDARDS G2105 MANUAL G2121 SIEVE SHAKER, 3",5" & 8" SIEVES 110 V / 60 Hz ASTM C-136 G V / 50 Hz SIEVE SHAKER, FOR 8", 10", 12" SIEVES The G2123 & G2124 Heavy-Duty Sieve Shakers has the ability to handle 11 full or 19 half-height 8" sieves; 7 full height 10" sieves; or 7 full, 11 intermediate or 13 half-height 12" sieves makes this shaker extremely versatile. The spring-type rebound shaking and rocker action separates materials for accurate, reliable grading. Also furnished with the shaker is a 30 minute automatic timer. Constructed from the highest quality materials for long lasting, trouble free operating life. MODELS POWER STANDARDS G2123 G2124 SIEVE SHAKER, 12", 10" & 8" SIEVES 230V / 50 Hz ASTM C-136
3 60 GRADATION SIEVE SHAKER, MARY ANN The G2225 Mary Ann Motorized Laboratory Sieve Shakers can handle up to a 20" stack of unclamped 12" or 8" sieves at 45 O. When using 8" sieves the unit has a maximum capacity of 10 full-height sieves, while 12" sieve capacity is 6 full-height sieves. The sieving action allows each particle maximum opportunity to pass through the mesh. These high quality shakers offer quite operation while minimizing sieve wear. Also included is a convenient storage rack while the new digital timer ensures precise operation. The G2223 has the same operation but is designed to handle only 8" sieves. MODELS SIZE G2223 8" SIEVE SHAKER, MARY ANN G2225 8" & 12" SIEVE SHAKER, FOR 8", 10" & 12" SIEVES This is a portable sieve shaker that accommodates 8", 10", or 12" sieves. It holds up to 8 full height 8" sieves or 6 full height 12" sieves, plus pan and cover. All major parts are constructed of high strength aluminum alloy. Shaking action is accomplished by four concentrically mounted springs, providing a unique three way action in each cycle. The sieves are shaken side to side, up and down, and with a slight twist to keep particles moving across the sieve screen and evenly disbursed. The motor is 1/3 hp and has a built in timer. MODELS POWER G2261 G2262 SIEVE SHAKER, 8", 10" & 12" SIEVES COUNTER BALANCED SIEVE SHAKER These 1/3 hp motor sieve shakers feature automatic 2-way tapping combined with perfect circular rotation which covers the widest range of applications. The exclusive 2-way sieve clamping system secures the integral cover assembly to two stainless steel guide rods by clamp knobs. Then the sieve stack is pressured vertically by the center knob. Once loosened, the cover assembly slides on guide rods for easy repositioning to any sieve stack height. An internal counterbalance allows the unit to remain stationary without permanent mounting. These units have a precision built in electric timer which repeats test times exactly at the touch of the "start" button and also resets automatically to any selected test time (up to 15 minutes). The G2351 and G2352 are for use with 8" sieves and can hold 10 full height or 20 half height sieves plus pan and cover. While the G2355 and G2356 are primarily for 12" sieves, an adapter is included for use with 8" sieves with a capacity of 6 full height or 13 half height sieves plus pan and cover. MODELS POWER G2351 G2352 G2355 G2356 G2361 SOUND COMPARTMENT G2365 SIEVE STORAGE RACK, 3" TO 12" G2366 COUNTER BALANCED SIEVE SHAKER, 8" SIEVES COUNTER BALANCED SIEVE SHAKER, 8" & 12" SIEVES EXTRA SUPPORT ROD SET
4 GRADATION 61 RO-TAP SIEVE SHAKER The RO-TAP sieve shaker for 8" sieves has 285 horizontal movements and 156 taps per minute. The unit mounts on any solid table with just 2 bolts. The shaker has a built in 30 minute timer and an adjustable sieve support plate. The motor is a 1/4 hp unit which is completely enclosed. The motor is available in 110V/60Hz (G2205) and 220V/50Hz (G2206) models (please specify type needed). The unit holds 6 full height or 13 half height sieves with pan. Unit is virtually maintenance free except for occasional lubrication. Also available in 12" diameter models, 110V/60Hz (G2211) and 220V/50Hz (G2212). An adapter (G2214) is available for the 12" models to allow use with 8" sieves. The G2219 Sound Enclosure is specifically designed to be used with the G2205 thru G2212 Ro-Tap Sieve Shakers. The sturdy enclosures are constructed with 18 gauge steel furnished with a 1" metal faced, acoustic foam, inner liner. Other features include a hinged top cover with automatic lift cylinders, an air ventilation hose and operating indicator light. Operating noise levels of the sieve shakers are reduced from approximately 85 db to 60 db. MEETS ASTM E-11 AND AASHTO T-27 AND M-92 MODELS POWER G2205 G2206 G2211 G2212 RO-TAP SIEVE SHAKER, 8" SIEVES RO-TAP SIEVE SHAKER, 12" SIEVES G2214 G2219 ADAPTER FOR 8" DIA. SIEVES SOUND ENCLOSURE SIEVE VIBRATOR The G2151 & G2152 is very useful to facilitate hand sieving, by wet or dry method, fine grained materials using one or two 8" dia full height sieves. For dry method place over bucket or large pan or use one sieve and extended rim pan (G1098) to collect sample. For wet sieving place in a sink and wash with water from spigot with (G1969) wet sieving attachment. The Vibrating unit is mounted on a plastic-coated lightweight cast aluminum frame. For 230V/50Hz please order the L8851 transformer. MODELS POWER G2151 G2152 SIEVE VIBRATOR 230V / 50 Hz G1098 G1969 L8851 BRASS PAN W/ EXTENDED RIM WET WASHING ATTACHMENT 230V TRANSFORMER VIBRA PAD The G2161 & G2162 Vibra Pads are very useful for breaking surface tension when wet sieving very fine materials using 6" dia or smaller sieves. They also accommodate nonstandard diameter sieves that cannot be adapted to the G2351 Sieve Shaker. The pads can also be used with a microsplitter when reducing sticky or near size materials, and for compaction and settling tests of powders. The vibration intensity can be set by knob. The plastic coated 5-1/4 " square platform has two wing nut fasteners and corner pillars with garter springs for holding sieves and other items in place. MODELS POWER G2161 G2162 VIBRA PAD 230V / 50 Hz
5 62 GRADATION GILSON TESTING SCREEN The testing screen is an ideal tool for sizing test samples of crushed stone, sand and gravel. Handles up to 1 cu. ft. sample batches. Samples are separated into two to seven sizes simultaneously in three to five minutes. The unit is built for rugged service. The outer frame encloses the vibrating unit which consists of a series of screen trays. Five coarse screen trays: 2", 1-1/2", 1", 3/4", and 1/2" (or other combination of coarse trays) and a dustpan are supplied with the unit, however, it will accommodate an extra tray if the dustpan is placed in the stationary position under the vibrating unit. The screening motion is a vertical vibration. The trays are held in place by manually operated threaded clamping rods. The testing screen is also available with a hydraulic clamping device. The hydraulic clamping is recommended for heavy-use situations. The trays are clamped and released quickly with a few motions of the hydraulic pump handle. The tray size is 18" X 26" and 3/4" deep. MODELS G2701 TESTING SCREEN, MANUAL CLAMPING, G2701A TESTING SCREEN W/O TRAYS, MANUAL CLAMPING, G2702 TESTING SCREEN, MANUAL CLAMPING, G2705 TESTING SCREEN, HYDRAULIC CLAMPING, G2705A TESTING SCREEN W/O TRAYS, HYDRAULIC CLAMPING, G2706 TESTING SCREEN, HYDRAULIC CLAMPING, G2711 SAND ATTACHMENT G2712 SOUND COMPARTMENT G2714 DOOR ENCLOSURE G2715 AUTOMATIC TIMER, 15 MINUTE G2718 CLEAN-N-WEIGHT SET G2723 TRAY, 4" THRU #4 G2725 TRAY, #5 THRU #14 G2727 TRAY. #16 THRU #200 G2731 TRAY, #200 G2734 DUSTPAN TRAY G2735 ROUND TRAY, HOLDS 4" THRU.125" G2738 G2739 G2740 G2741 RACK FOR 7 TRAYS REPORT FORMS. 5 PADS TRAY, FLAT WIRE. LESS SCREEN TRAY, HOOK WIRE. LESS SCREEN G2742 SCREEN, 4" THRU #4 G2743 SCREEN. #5 THRU #14 G2744 SCREEN. #1 THRU #100 G2745 SCREEN, #200 G2748 BACK-UP SUPPORT FOR SCREEN GILSON PORTA SCREEN The porta-screen has long been the standard portable testing screen for field control of construction aggregates and for quality control in blacktop and ready mix plants. The machine holds up to 5 screens and a tray. No mounting is required because of a vibration counterbalance. The shaker has a built in digital timer that counts down to zero and stops the machine and resets itself for the next test. The trays are fastened down by dual hand clamp levers. The unit is equipped with a 1/4 hp motor and is also furnished with a series of five coarse trays: 2", 1-1/2", 1", 3/4", and 1/2" (or other combination of coarse trays). MODELS G2751 PORTABLE TESTING SCREEN, G2751A PORTABLE TESTING SCREEN LESS TRAYS, G2752 PORTABLE TESTING SCREEN, G2753 COVER, W/ LATCH & HINGE G2754 SCREEN & TRAY 2" THRU #4 G2755 SCREEN & TRAY #5 THRU #14 G2756 SCREEN & TRAY #16 THRU #100 G2757 SCREEN & TRAY #200 G2766 COVER FOR TOP G2767 DUST PAN TRAY G2768 WHEELS, SET OF 2 G2771 SCREEN, 2" THRU #4 G2772 SCREEN. #5 THRU #14 G2774 SCREEN. #16 THRU #100 G2775 SCREEN, #200 G2776 G2777 BACK-UP SUPPORT TRAY W/O SUPPORT, SHIELDS OR CLOTH
6 GRADATION 63 GILSON TEST MASTER The Test-Master testing screens are designed for coarse materials of mid-range density such as limestone or gravel. Similar to the G2705 except the Test-Master has an internal counter balance which eliminates the need for permanent anti-vibration mounting in trailers or near sensitive equipment. Balancing is achieved through the internal rotating weights which equalizes the action of the vibrating mechanism. The G2781 & G2782 holds six screen trays and pan. The G2785 & G2786 holds seven trays and pan, but closer tray spacing limits use of these models to 3/8" tray sizes and finer for the bottom four tray slots. The enclosed outer case confines dust and reduces noise. Also featured is a built-in timer which can be programed up to 99 min., 59 sec. The screen trays are hydraulically clamped in operating position by the foot-pedal clamping device. Five coarse series trays are furnished with the Test-Master: 2", 1-1/2", 1", 3/4", and 1/2" (or other combination of coarse trays). MODELS G2781 G2781A G2782 G2785 G2786 G2711 G2712 G2714 G2715 G2718 TEST MASTER. 5-6" TRAY CAP TEST MASTER W/O TRAYS. 5-6" TRAY CAP TEST MASTER. 5-6" TRAY CAP TEST MASTER. 7" TRAY CAP TEST MASTER. 7" TRAY CAP SAND ATTACHMENT SOUND COMPARTMENT DOOR ENCLOSURE AUTOMATIC TIMER, 15 MINUTE CLEAN-N-WEIGHT SET G2723 TRAY, 4" THRU #4 G2725 TRAY, #5 THRU #14 G2727 TRAY. #16 THRU #200 G2731 TRAY, #200 G2734 DUSTPAN TRAY G2735 ROUND TRAY, HOLDS 4" THRU.125" G2738 G2739 G2740 G2741 RACK FOR 7 TRAYS REPORT FORMS. 5 PADS TRAY, FLAT WIRE. LESS SCREEN TRAY, HOOK WIRE. LESS SCREEN G2742 SCREEN, 4" THRU #4 G2743 SCREEN. #5 THRU #14 G2744 SCREEN. #1 THRU #100 G2745 SCREEN, #200 G2748 G2791 G2792 BACK-UP SUPPORT FOR SCREEN EXTRA PAN, REGULAR EXTRA PAN, DEEP ELECTRONIC DIGITAL INDICATOR These electronic digital indicators offer exceptional accuracy and unmatched versatility. Features a large easyto-read LCD display. Other features include: travel reverse, floating zero, maximum reading hold rotating bezel, inch/metric display conversion. MODELS RESOLUTION G3161 1" / 25.4 MM.0001" /.002 MM G3162 1" / 50.8 MM.0001" /.002 MM G3163 4" / MM.0001" /.002 MM
OPERATING MANUAL. Gilson Rice Shaker SGA-5R & SGA-5RT
OPERATING MANUAL Gilson Rice Shaker SGA-5R & SGA-5RT Rev: 05/08/2018 PHONE: 800-444-1508 P.O. Box 200, Lewis Center, Ohio 43035-0200 FAX: 800-255-5314 740-548-7298 E-mail: customerservice@gilsonco.com
More informationTV & Office Solutions by equip solutions with a high value of benefit
TV & Office Solutions by equip solutions with a high value of benefit The brand equip stands for a product development driven by quality management and continuous adjustments to the requirements of the
More informationThe best value sieves money can buy
The best value sieves money can buy Glenammer Engineering Ltd 62 Viewfield Road, Ayr KA8 8HH, United Kingdom Tel: +44 (0)1292 261444 Email: sales@glenammer.com Web: www.glenammer.com Glenammer Engineering
More informationHorizontal Sieve Shaker AS 400 control
General Information The analytical sieve shaker AS 400 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The
More informationROLLING COUNTER SHUTTERS
500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings
More informationBox Type Tru-Balance
Box Type Tru-Balance Box Type Tru-Balance The original Tru-Balance sifter is custom designed and built for screening any dry, freeflowing product ranging in size from 1/4" to 400 mesh. It provides a gentle,
More information5. Operating instructions: Octagon 200CL
1. Technical specifications 5. Operating instructions: Octagon 200CL Copyright 2015 by Endecotts Ltd. 33 1. Setting up Technical specifications SIEVE SHAKER MODEL: Octagon 200CL General Information The
More informationOPTIMIZING YOUR SCREENING PROCESS
OPTIMIZING YOUR SCREENING PROCESS A GREAT RANGE OF SCREENS FOR ALL APPLICATIONS Our screens are the result of over 50 years of continuous development All critical components have been field-tested with
More informationOPERATING MANUAL. Micro-Deval Apparatus MD-2000, MD-2000C & MD-2000F
OPERATING MANUAL Micro-Deval Apparatus MD-2000, MD-2000C & MD-2000F Rev: 07/17/2017 PHONE: 800-444-1508 P.O. Box 200, Lewis Center, Ohio 43035-0200 FAX: 800-255-5314 740-548-7298 E-mail: customerservice@gilsonco.com
More informationProduct Overview. Features
APCF1 Model Tripod Product Overview The Ravelli APCF1 is a Professional Quality Carbon Fiber Tripod providing a solid base for high-end photographic equipment. This model is a mix of carbon fiber and magnesium
More informationanalysette 18 particle size analysis quality control sieving for your lab Heavy Duty Analytical Sieve Shaker
analysette 18 Heavy Duty Analytical Sieve Shaker Rapid sieving Large sieving quantities Test sieves up to 450 mmdia. particle size analysis sieving quality control for your lab Heavy Duty Analytical Sieve
More informationTV Brackets by equip The perfect solution to securely mount your TV
TV Brackets by equip The perfect solution to securely mount your TV No matter what s the size, if you want your TV in a fix position or want it to tilt, we have the solution you re been looking for. intro
More informationIKA Mixing Orbital shakers
Orbital shakers 40 lab dancer Economic, compact test tube shaker with touch function. Its compact and clever design makes it an indispensable tool for every laboratory The lab dancer can be used with all
More informationC-pan arm USERS INSTRUCTIONS
C-pan arm USERS INSTRUCTIONS Designed 1 of 12 and made in Denmark Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our
More informationDrilling Machine. Presenter: G. Tulloch
Drilling Machine Presenter: G. Tulloch Drilling machine A power operated machine tool which holds the drill in its spindle rotating at high speeds and when actuated move linearly against the work piece
More informationClinical Support Products. Supporting your clinical care in so many ways.
Clinical Support Products Supporting your clinical care in so many ways. Quality Products for Quality Care Hampers & Carts A single, convenient source for so many solutions. Durable designs you can depend
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationskyline 70 Fluid Head OPERATOR S MANUAL #1050 Skyline 70 Fluid Head
skyline 70 Fluid Head OPERATOR S MANUAL #1050 Skyline 70 Fluid Head Features and Controls Sliding Plate Lock Sliding Plate Pan Handle Clamp Tilt Lock Pan Handle Safety Lock Knob Pan Lock Threaded Stud
More informationMultiCam 1000 Series CNC Router Feature and Specification Guide. Maximum Flexibility Made Affordable! MultiCam. Ideal for Cutting: Wood
MultiCam 1000 Series CNC Router Feature and Specification Guide Maximum Flexibility Made Affordable! MultiCam accepted the industry challenge to build a rigid, reliable CNC machine platform with excellent
More information24KO VARIO INSTRUCTION FOR MOBILE PROJECTION SCREENS VARIO 32 AND VARIO 64
24KO VARIO INSTRUCTION FOR MOBILE PROJECTION SCREENS VARIO 32 AND VARIO 64 CENTRE SUPPORT Consists of plug in elements with interlocking and safety bolts. Adaptable to any frame size FOLDABLE LEGS Standard
More informationSPECTRUM-2 CONSOLES. TEL: WEB: winsted.com
SPECTRUM-2 CONSOLES TEL: 800.447.2257 WEB: winsted.com EMAIL: info@winsted.com PRODUCT FEATURES AND HIGHLIGHTS Laminate with Safeguard Work Surface Spectrum 2 comes standard with our durable laminated
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationTV MOUNTS & STANDS LIST
FIXED TV WALL MOUNTS KM20-22F 23-42 SLIM KL21G-44F PLB-40 SUPER LOW PROFILE UPDATED: 01/30/2018 TV MOUNTS & STANDS LIST + FLOATING SHELVES, PROJECTOR, SPEAKER, MONITOR & TABLET MOUNTS PAGE 1: FIXED 2-4:
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More informationTEC APO 200 OWNER S MANUAL
TEC APO 200 OWNER S MANUAL 2005 IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE SAFETY WARNINGS Do not look at the sun through the telescope! Viewing the sun through the telescope without
More informationserial number A1159T or lower, which includes all manufactured in 2008 Not compatible and not required. Figure 1 Auger Update Sites Call-Outs R B
Installation Instructions 1 Auger Carrier Update ADC2350 Air Carts Used with: ADC2350B General Information These instructions explain how to install an Auger Carrier Update on a pre-2009 pull-behind air
More informationtest sieves, sieve shakers & Particle Analysis Equipment
test sieves, sieve shakers & Particle Analysis Equipment ADdress W.S. Tyler 8570 Tyler Boulevard, Mentor, OH 44060, USA www.wstyler.com Phone 1-800-321-6188 1-440-974-1047 A Haver & Boecker Company table
More informationApplications : LA-51-1 LA-52-1 LA-51-2 LA Features : LA-51-3 LA-52-3 LCD SUPPORTER KEYBOARD ARM
Applications : It goes well with partition boards and tracks in an office, or Medicine table at a dentist, or Medical equipment at a clinic or mobile cart, or Industrial machinery or monitor system at
More informationSit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
More informationMechanical. The industry standard for over 100 years. Balances
Mechanical Balances The industry standard for over 100 years Ever since the OHAUS Harvard Trip balance set the standard by which an industry would be measured, both OHAUS products and name have been recognised
More informationDelivering the right equipment. for your unique laboratory
Delivering the right equipment for your unique laboratory Table of Contents The right piece of equipment is an investment both of your lab s budget and your valuable time. When it s time to purchase equipment,
More informationIRONRIDGE PRODUCT CATALOG
IRONRIDGE PRODUCT CATALOG Effective March 15, 2011 Product Catalog March 15, 2011 2 What s New: 1. New Products: a. End Caps for XRS and XRL Rails Page 6 b. End Clamps I, J, K, Page 7 and updated sizing
More informationHINDU MAQUINAS CO (Quality, cgmp compliant, economical and guaranteed service Pharmaceutical Equipment )
HINDU MAQUINAS CO (Quality, cgmp compliant, economical and guaranteed service Pharmaceutical Equipment ) TABLET COMPRESSION MACHINES Mr. Bhanu Srivastava WhatsApp : +91 9822393634 Email : info@hindu.maquinas.com
More informationMicroLab Posts, Bases, and Rails
MicroLab Posts, Bases, and Rails www.mellesgriot.com Stable mounting and positioning are required to build optical systems. In the laboratory, posts and post holders are commonly used for mounting optical
More informationAVT Model Tripod.
AVT Model Tripod www.ravelliphoto.com Product Overview: The Ravelli AVT professional tripod is a high performance, fluid drag tripod that provides smooth continuous drag control and operates on both pan
More informationMERIT SERIES. For Today's Sensible Buyer MANUFACTURED IN THE USA
MERIT SERIES For Today's Sensible Buyer MANUFACTURED IN THE USA MERIT SERIES Desking and Storage for every work style and space Private, collaborative, individual or teaming Manufactured in Hillsboro,
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationInstruction Manuall. Flowcam Series. Professional dual-arm Camera Stabilizer System 5-15 lbs
Flowcam Series Professional dual-arm Camera Stabilizer System 5-15 lbs Instruction Manuall Please read the instruction manual thoroughly before operating your aviator stabilizer for the first time to avoid
More informationtest sieves, sieve shakers & Particle Analysis Equipment
test sieves, sieve shakers & Particle Analysis Equipment ADdress W.S. Tyler 8570 Tyler Boulevard, Mentor, OH 44060, USA www.wstyler.com Phone 1-800-321-6188 1-440-974-1047 A Haver & Boecker Company table
More informationHCM-3000SD.5F. Concrete. Compression Machines. How to Order: Machine Series. Electrical Configuration
Machines 1.800.544.7220 www.humboldtmfg.com HCM-2500DIR machine with optional floor stand. HCM-4000DIR machine with floor stand. HCM-0135 Cylinder Loading Shelf is available for use with HCM-2500 Series
More informationDS5/DS10/DS20 Fluid Head Operator s Manual. #180 DS5 Fluid Head #182 DS10 Fluid Head #184 DS20 Fluid Head
DS5/DS10/DS20 Fluid Head Operator s Manual #180 DS5 Fluid Head #182 DS10 Fluid Head #184 DS20 Fluid Head Features and Controls 1/4 and pin carriage Sliding camera plate Slide lock Tilt lock Tilt drag Pan
More informationSECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].
(Specifier Note: The purpose of this guide specification is to assist the Specifier in correctly specifying AeroLift motorized projector lifts and their installation. The Specifier needs to edit these
More informationMAX 13,300 RPM. C3 Ceramic: Z3 Zirconia Alumina: CONTAMINANT-FREE Iron, Sulfur, and Chlorine 0.1%
WHEEL SPECIFICATIONS ANALYSIS OF TYPICAL WHEEL SPECIFICATIONS Analysis of Typical Wheel Specifications MAX 13,300 RPM www.cgwcamel.com CGW Resin Bond Abrasive Types CGW Coated Abrasive Types A Dark Aluminum
More informationDOOR SWEEP DOOR BOTTOM W/ SHIELD MAGNETIC DOOR SET DOOR SET WEATHERSTRIP WEATHER STRIP PUSH STYLE THRESHOLD INSERT. Page 1 WD 9110 WD 9105
C A U D I L L S U P P L Y I N C. Page 1 DOOR SWEEP DOOR BOTTOM W/ SHIELD WD 9105 WD 9110 DOOR SET WEATHERSTRIP MAGNETIC DOOR SET WD 9111 WD 9112 WEATHER STRIP PUSH STYLE THRESHOLD WD 9113 WD 9114 Bronze
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationSuperior Engineering Proven Performance Excellent Finish Less Fatigue
FEATURING Taping & Finishing Tools Built Superior Engineering Proven Performance Excellent Finish Less Fatigue Intex Automatic Flat Boxes Intex Automatic Flat Finisher Boxes - Smooth Operation The exclusive
More informationworkstation acessories ErgoChair ergonomic chair designed for the factory worker
workstation acessories ErgoChair ergonomic chair ErgoChair ergonomic chair designed for the factory worker the backrest and seat foot ring adjustment ranges are designed to cover a large variety of production
More information2 x Dynamic Arms on 135 Post with C-Clamp
Installation Guide AWMS-2-D13-C 2 x Dynamic Arms on 135 Post with C-Clamp COMPONENT CHECKLIST RANGE A AWM-LC Post Clamp B AWM-AD Dynamic Arm (x2) C AWM-P13 135 Post D AWM-FC C-Clamp CONTENTS C-Clamp Page
More informationE-SOC CONTROL STATION. TEL: WEB: winsted.com
E-SOC CONTROL STATION TEL: 800.447.2257 WEB: winsted.com EMAIL: info@winsted.com PRODUCT FEATURES AND HIGHLIGHTS Endurance Plus Work Surface E-SOC comes standard with our proprietary Endurance Plus Work
More informationNew products spring 2018
New products spring 2018 MODULAR SOLUTIONS CASY SERIES DESKTOP CHASSIS Front module mounting Large access holes on rear Structured black powder coating (RAL9004) Aluminum extruded frame with plastic sides
More informationdia. grit type R type S eblend surface conditioning disc
QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using
More informationEDUCATION & TRAINING. Engaged in Teaching & Learning MANUFACTURED IN THE USA
EDUCATION & TRAINING Engaged in Teaching & Learning MANUFACTURED IN THE USA EDUCATION & TRAINING Adjustable welded frame tables give the tools and flexibility to create ideal layouts for any need Adjustable
More informationstandard construction & overview
standard construction & overview Fabric Specific Extrusion NLine s simplicity and beauty centers on its one of a kind extrusion system that frames the graphic on all four sides to assure a tight clean
More informationPRODUCT OVERVIEW. Well Inspection Cameras & Systems. See what you re missing. Proudly made in the U.S.A.
PRODUCT OVERVIEW Well Inspection Cameras & Systems See what you re missing. Proudly made in the U.S.A. See what you re missing. Aries provides the equipment you need for efficient well inspection to ensure
More informationREASONS WHY A FOLDER MAKE SENSE!
FOLDING MACHINES GREEN SOLUTIONS The motorized folding machines from CIDAN are the right solution for any company that is looking for flexibility in their production and has an environmentally friendly
More informationFeatured Products - RU Marking Standard on Hoffman brand
: Open Frame Racks CHAPTER Open frame racks are versatile solutions for mounting hubs, switches, routers and servers. Easy access to all sides simplifies maintenance and updates. Solidly constructed, Pentair
More informationPRESTIGE ASCEND CONSOLES PRESTIGE
PRESTIGE ASCEND CONSOLES PRESTIGE PRODUCT FEATURES AND HIGHLIGHTS Three Base Console Widths Base consoles are available in three widths: 24, 48, and 72. Features the Insta-Lock fastening system for simple
More informationMicroscopic Imaging Research Station (MIRS) Assembly Guide. Version 1.0.0
Microscopic Imaging Research Station (MIRS) Assembly Guide www.adsyscontrols.com Adsys Controls, Inc.2012 Version 1.0.0 I. Assembly of the Adsys Controls MIRS system This document explains the assembly
More informationCharts + Carts + Accessories
work tools Charts + Carts + Accessories Mbrace accessories... 43 Sit stand accessories... 41 Mbrace mounts... 43 Sit stand workstations... 40 Mobile laptop cart... 41 E ERGONOMIC WORKSTATIONS WORK TOOLS
More informationCom-Tray. Under Floor. Labor-saving assembly Field proven and tested Superior construction Shipped ready to assemble
Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting
More informationVacuum Maintenance Manual (EXCERPT Tim Benedict)
1. Position a ladder, scaffold, or work stand, on the right side of Vacuum Skid where the blower motors are installed. 2. Locate the six (6) vacuum hoses connecting the blower motors to the HEPA housings
More informationBreeze Film Shooting Equipment (P-W5P-BRZ) I N STR UC TI ON MANUAL
Breeze Film Shooting Equipment (P-W5P-BRZ) I N STR UC TI ON MANUAL All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
More informationPros demand of Tripods, Heads and Support Accessories. And INDURO delivers with a wide and growing range
Tripods, Monopods, Heads and more 2 INDUROGEAR.COM INDURO. ROCK SOLID, NO MATTER WHAT these are the perfect words to define the performance that today s Pros demand of Tripods, Heads and Support Accessories.
More informationAlignment. Featuring ProAlign. Software
Alignment Featuring ProAlign Software HawkEye Alignment Featuring ProAlign Software The HawkEye Alignment System featuring ProAlign alignment software functions on a Linux operating system. This unique
More informationUniversal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
More informationSECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &
More informationAESLLC. ** An obvious and overdue safe storage solution for mini-dv tapes & Removable Hard Disk Drives **
Digital Video cameras transform blank DV tape stock into irreplaceable Master Video Recordings. Libraries of Master Video Recordings expand to sizable volumes in short order. Each DV-SafeBox will house
More informationAssembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
More information110 manuals_110 manuals 6/27/2010 8:16 PM Page 1 TEC APO110 FL ECLIPSE
110 manuals_110 manuals 6/27/2010 8:16 PM Page 1 TEC APO110 FL ECLIPSE OWNER S MANUAL 2010 110 manuals_110 manuals 6/27/2010 8:16 PM Page 2 IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE
More informationCat. No. Description Tube Capacity Speed Range Rocking Angle Exterior Shipping Electrical
Vari-Mix and Speci-Mix Test Tube Rockers Compact, precision-controlled platform mixers provide smooth rocking action for uniform specimen suspension All models hold 10 to 30mm diameter tubes and are ideal
More informationProAlign Alignment Systems Optimized for speed and efficiency
ProAlign Alignment Systems Optimized for speed and efficiency NEW w PRELIMINARY QuickGrip wheel adaptors & high-definition targets Hunter's patented QuickGrip adaptors and highdefinition targets accelerate
More informationDual Gas Spring Desktop Mount
Mounts With functionality, flexibility, and ease of installation at top of mind, V7 mounts are designed with high grade durable materials that compliment the connected displays. Rigorous fatigue, load,
More informationParts Manual Kleen Sweep 28 - Model Battery
Parts Manual Kleen Sweep 28 - Model Battery Parts Manual - Kleen Sweep 28 - Model Battery Page 2 Table of Contents Side broom cpl. part 1... Side broom cpl. part 2... Frame - Wheels... Covering MM KS 28B...
More informationCompact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs
Compact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs Features Miniature industrial quality quarter turn (90 ) rotation Excellent power to size ratio only 4.6 H x 3 D Type 4X and IP67 weatherproof
More informationVWR HOMOGENIZERS. Precision and reliability. Benchtop and Handheld Homogenizers. Effectively and efficiently homogenize your sample
VWR HOMOGENIZERS Benchtop and Handheld Homogenizers Effectively and efficiently homogenize your sample Precision and reliability VWR 200 Homogenizer Lightweight Hand-Held Homogenizer Unit For Processing
More informationMounting Accessory Guide
Apr. 12 2010 Table of Contents Mounting Accessory Guide 1 Overview 5 Introduction... 5 Types of Mounting Methods... 5 Surface... 5 Wall... 5 L-Type Wall Mount (PMAX-0308) 6 Heavy Duty Wall Mounts (PMAX-0305
More informationRemoval and Installation 8
Removal and Installation 8 8 Introduction 8-2 Service Calibration Guide to Removal and Installation 8-4 Window 8-8 Covers and Trims 8-12 Rear Tray 8-31 Rear Cover 8-32 Media Lever 8-33 Media Lever Position
More information19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43
9" TiRAX cabinet system from page 9" NETcell cabinet system from page Open 9" racks from page Wall-mounting/stand-alone distribution systems from page 5 Wall-mounting enclosure systems from page 6 Air
More informationPRODUCT OVERVIEW. Well Inspection Cameras & Systems. See what you re missing. Proudly made in the U.S.A.
PRODUCT OVERVIEW Well Inspection Cameras & Systems See what you re missing. Proudly made in the U.S.A. See what you re missing. Aries provides the equipment you need for efficient well inspection to ensure
More informationCONFERENCE ROOMS. Furniture that facilitates collaboration MANUFACTURED IN THE USA
CONFERENCE ROOMS Furniture that facilitates collaboration MANUFACTURED IN THE USA CONFERENCE ROOMS Make an impactful impression Beautiful wood tables tailored to your company s needs for functionality
More informationSovella Concept Workstation. Solutions A to Z DEDICATED TO HUMAN WORKSPACE.
Sovella Concept Workstation Solutions A to Z DEDICATED TO HUMAN WORKSPACE www.sovella.us Sovella Concept Workstation Solutions... A to Z Concept workstations are designed for the needs of industry, where
More information2015 Product Catalog. MiJET - Angled 12"diameter model
Deluxe Workstations with Butcher Block surfaces - available with or without solvent container and parts baskets. See image on next page for workstation without solvent container. Part Number MiJET Unit
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationcineline 70 Fluid Head OPERATOR S MANUAL #1055 Cineline 70 Fluid Head
cineline 70 Fluid Head OPERATOR S MANUAL #1055 Cineline 70 Fluid Head Features and Controls Side Load Lock Lever Pan Handle Clamp Tilt Lock Pan Handle Pan Lock Safety Lock Knob Front Box Mounting Threaded
More informationSockets & Accessories
Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry
More informationClassic ipad/tablet Stand Display
Classic ipad/tablet Stand Display The Classic ipad Stand is a versatile and functional stand that can be used with ipad 2 and later and Samsung Galaxy 10.1. The angle can be adjusted and the ipad can be
More informationTOPRAIL LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S)
TOPRAIL LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S) Rev D TOPRAIL SHELVING / PROPRIETARY STORAGE SYSTEM DESCRIPTION: Rail hung storage system. All items are hung from the rail/uprights - only
More informationMK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
More informationwith External Springs
Two-Section Broadcast Arm with External Springs Owner s Manual Introduction Thank you for choosing the Auray two-section broadcast arm with external springs. This versatile and sturdy broadcast arm is
More informationTinius Olsen. DG Series. Semi-Automatic Concrete Compression Testers TO00DGEN04
TO00DGEN04 DG Series Semi-Automatic Concrete Compression Testers Tinius Olsen DG Series The machine pictured below right is from the DG Series Model TO317E-DG with a maximum testing capacity of 450,000lbf
More informationPROLINE ExtERNaL COmPONENts 0-mm solid BasE Catalog Number Fits Frame B x C W (mm) W (in.) D (mm) D (in.) PB045 PB046 PB064 PB064HF2 PB065HF2 PB066
Spec-00429 PROLINE External Components PROLINE Tops and Bases 0-mm Solid Base The 0-mm bases are finished with RAL 7035 textured light-gray polyester powder paint (except stainless steel). EMC bases are
More informationor
Infinite possibilities for your data center The F-Series TeraFrame T M Cabinet System The F-Series TeraFrame Cabinet System from Chatsworth Products, Inc. (CPI) provides configurable thermal management
More informationDo More With OHAUS. Lab Equipment
Do More With OHAUS Lab Equipment Contents Centrifuges Frontier Series... 1 Rotors & Accessories... 6 Open Air Shakers Light Duty Orbital Shakers...25 Extreme Environment Shakers...26 Heavy Duty Orbital
More information3M Stikit Systems. 3M Stikit Disc Cloth General Use. Abrasives. TECH TIP: Stikit Disc Finish Life Characteristics
3M Custom Woodworking Catalog 21 3M Stikit Systems Stikit Systems: Versatile, Convenient and Efficient A New Level of Productivity 3M manufactures a complete line of Stikit coated abrasives to handle your
More informationAdjust-O Magnet Squares
Adjust-O Magnet Squares The original magnet squares featuring On/Off switches. Patent No. US 7,009,480 B2 Adjust-O Magnet Squares The On/Off switch HEAVY DUTY HEAVY DUTY MSA45 MSA48-HD MSA53-HD Multiple
More informationHeratherm Compact Microbiological Incubators
Heratherm Compact Microbiological Incubators Incubators Extremely small footprint, making it ideal for personalised workspace or for crowded labs with small sample volumes 18L capacity, and operates in
More informationBaumCut 26.4E & 26.4N
BaumCut 26.4E & 26.4N High Productivity Cutting Solutions BAUM FOLDERS CUTTERS DRILLS PRESS FINISHING GENUINE PARTS www.baumfolder.com BaumCut Paper Cutters... BaumCut 26.4E and 26.4N Series programmable
More informationLaboratory Clamps and Supports
Laboratory Clamps and Supports Benchclamps 2 Laboratory Clamps Multi-Purpose Benchclamp Heavy-Duty Clamps grip adjustment range Single or dual adjust Available in three sizes; small, medium, and large
More information