This course is intended for those who provide basic support for and perform administrative functions of the Data ONTAP operating system.

Transcription

1 Accelerated NCDA Boot Camp Data ONTAP Mode (ANCDABC87) Who should attend This course is intended for those who provide basic support for and perform administrative functions of the Data ONTAP operating system. Certifications This course is part of the following Certifications: NetApp Certified Data Management Administrator (NCDA) Prerequisites Three years of experience in a storage related function, such as storage administrator or field engineer Six months experience with NetApp storage solutions Data ONTAP 7-Mode Administration (D7ADM) Course Objectives By the end of this course you should be able to: Configure and administer the client/server in an NFS environment stating the rules for exporting resources and explain the /etc/exports access Configure, administer, and troubleshoot a storage system in a CIFS environment including creating and managing shares, users, groups, and sessions Collect and analyze performance data to assist with troubleshooting storage system hardware, operating systems, network connections, NFS configuration files, and options Define the components of a SAN environment and how LUNs relate to the storage system Explain Fibre Channel (FC) and iscsi SAN multipathing options for Windows and Linuxbased operating systems List the methods of storage system and data availability Configure and administer SnapRestore, asynchronous and synchronous SnapMirror, MetroCluster, SnapVault, and Open Systems SnapVault Course Content Prepare for success when taking the NS0-154 NetApp Certified Data Management 7-Mode Administrator Exam. Through lectures and labs, you will learn the essential features and functions of the Data ONTAP Mode operating system including network-attached storage administration and storage area networks configuration. Detailed Course Outline Module 1 NCDA Overview Explain the NCDA certification Review key concepts from the Data ONTAP Mode Administration course

2 Module 2 NFS Overview Define Network File System (NFS) Differentiate between NFS protocol versions Recognize the difference between stateless and stateful protocols Describe how the storage system acts as an NFS file server List the requirements of NFS Module 3 NFS Setup Configure Network File System (NFS) on a NetApp storage system Add Network Information Server (NIS) to manage users, groups, and name-to-ip resolution Administer a storage system to perform Domain Name System (DNS) lookups Configure a storage system to access a Lightweight Directory Access Protocol (LDAP) server to centrally manage users and groups Set up PC-NFS and WebNFS environments to extend the reach of NFS Module 4 Exports and Mounts Identify exportable resources Export and unexport resources to clients, subnets, and netgroups Administer storage system with the exportfs command Create mountpoints and mount exported resources on a client Monitor the usage of exported resources Module 5 CIFS Overview Describe basic CIFS features Describe the following network environments: - Microsoft Windows workgroup - Non- Windows workgroup - Windows domains Describe how a storage system authenticates users in each server environment Explain the advantages and disadvantages of each server environment Module 6 CIFS Workgroups License CIFS on a storage system Join a storage system to a Windows workgroup environment using the cifs setup command Observe the results of cifs setup Manage newly created configuration files for the CIFS workgroup environment Module 7 CIFS Shares and Sessions

3 Display all shares available on the storage system List the default shares Configure a client machine to access any share Identify the CIFS sessions established by accessing a share on the storage system Add, modify, and delete shares Module 8 CIFS Access Control Create and manage local users for a storage system Identify how to create a local group and make a local user a member of that group Use the command-line interface, NetApp System Manager or Microsoft tools to add, delete, and modify access permissions of shares Use Microsoft tools to add, delete, and modify access permissions of files and folders Module 9 CIFS Domains Terminate the CIFS service to prepare for CIFS domain configuration Reconfigure the CIFS service for a Windows domain Identify the resulting files Create domain users and add the domain users to a local storage system group Set up Preferred Domain Controllers (DCs) Module 10 NAS Multiprotocol Determine and verify user mappings for CIFS users accessing UNIX and MIXED volumes and qtrees Determine and verify user mappings for UNIX users accessing NTFS and MIXED volumes and qtrees Module 11 NAS Troubleshooting Locate options and configuration files that can be misconfigured on the storage system Test for Domain Name System (DNS) resolution on both the storage system and the client Use client-side tools to test the client configuration Use storage system and client tools to isolate network system blockages Recognize typical error messages and list commands to identify the source of the error messages Module 12 SAN Overview Describe the differences between network-attached storage (NAS) and storage area network (SAN) List the methods to implement a SAN environment Define logical unit number, initiator, and target Describe ports, worldwide node names, and worldwide port names

4 List the basic steps to implement a SAN Module 13 FC Connectivity Describe multiple path implementation with Fibre Channel (FC) connectivity Describe how to configure FC ports on Windows, for Red Hat, and NetApp systems Describe commands and utilities to identify the worldwide node name (WWNN) and worldwide port name (WWPN) on Windows, Red Hat, and NetApp systems Module 14 iscsi Connectivity Describe multiple path implementation with iscsi connectivity Configure network ports on Windows, Red Hat, and NetApp systems Identify the worldwide node name (WWNN) on Windows, Red Hat, and NetApp systems Set up and verify multiple path iscsi connectivity between Windows, Red Hat, and NetApp systems Module 15 LUN Access Describe the steps to allow a Windows Server 2008 R2 initiator to access a LUN on a storage system Describe the steps to allow a Red Hat initiator to access a LUN on a storage system Module 16 Availability Overview List the methods to back up and recover data for data availability Describe the methods to ensure system availability Module 17 Snapshot Copies Describe the function of Snapshot copies Explain the benefits of Snapshot copies Identify and execute Snapshot commands Create and delete Snapshot copies Configure and modify Snapshot options Explain the importance of the.snapshot directory Describe how disk space is allocated by a Snapshot copy for volumes and aggregates Schedule Snapshot copies Configure and manage the Snapshot reserve Module 18 SnapRestore Explain how SnapRestore technology works with Snapshot copies Describe what SnapRestore reverts Revert a volume or a file using SnapRestore

5 Explain how SnapRestore works with SnapMirror Describe the effects of SnapRestore on backup operations Module 19 SnapVault Describe SnapVault components and benefits Configure SnapVault on primary and secondary systems Administer SnapVault on primary and secondary systems Describe the application-consistent backup feature available in Data ONTAP Mode Restore data from secondary to primary systems Module 20 OSSV Describe how Open Systems SnapVault integrates with Data ONTAP SnapVault List Open Systems SnapVault advanced features Configure and administer Open Systems SnapVault Perform Open Systems SnapVault backup and restore operations Troubleshoot and resolve Open Systems SnapVault transfer failures Module 21 High-Availability Define the high-availability controller configuration Describe the three modes of high-availability operation with a high-availability pair Analyze the effect on client protocols during failover and giveback operations Module 22 MetroCluster Describe a stretch MetroCluster environment List the basic steps to implement a stretch MetroCluster Describe a fabric-attached MetroCluster environment List the basic steps to implement a fabric-attached MetroCluster Module 23 SnapMirror Explain the SnapMirror Async, Sync, and Semi-Sync modes of operation Describe how volume SnapMirror and qtree SnapMirror replicate data Configure SnapMirror Perform advanced SnapMirror operations Explain SnapMirror performance impact Module 24 Performance Use Data ONTAP tools to identify networking, disk I/O, FC loop saturation, and CPU bottlenecks using systat, stats, and perfstat

6 Discuss how increasing utilization can affect performance Use the reallocate command to maintain performance Use recommended techniques to optimize Data ONTAP configuration for SAN and NAS Accelerated NCDA BootCamp Lab Exercises Lab 1-1 Identify the exercise environment Lab 1-2 Log into the exercise environment Lab 1-3 Install NetApp System Manager Lab 2-1 Identify the exercise environment (NFS Overview) Lab 2-2 Log into your assigned storage system Lab 2-3 Log in to NetApp System Manager and add your storage system Lab 3-1 License and configure the NFS service Lab 3-2 Add an admin host by the way of the SETUP command Lab 4-1Mount the root volume of the storage system on an admin host Lab 4-2 Export a volume using the command line interface Lab 4-3 Rename a volume and verify the automatic export Lab 4-4 Export and mount a Qtree Lab 4-5 Export to a subnet Lab 4-6 Export to a netgroup Lab 4-7 Export a Qtree using NetApp System Manager Lab 4-8 Mount an export from an admin host Lab 5-1 Identify the exercise environment (CIFS Overview) Lab 6-1 Configure a storage system for a Windows Workgroup environment Lab 6-2 Review the results of CIFS setup in a Windows Workgroup environment Lab 7-1 View current shares Lab 7-2 Create a new share using the command line interface Lab 7-3 Verify share access and display session information Lab 8-1 Add a new local user account and configure user access Lab 8-2 Access a network drive and work with access control Lab 8-3 Create a local group Lab 9-1Terminate CIFS services using NetApp System Manager Lab 9-2 Configure DNS with NetApp System Manager Lab 9-3 Configure the time services with NetApp System Manager Lab 9-4 Reconfigure the CIFS services using NetApp System Manager Lab 9-5 Create a 32-bit aggregate using NetApp System Manager Lab 9-6 Create a volume using NetApp System Manager Lab 9-7 Create shares and manage the permissions of the shares Lab 9-8 Create a domain user Lab 9-9 Create a share with Computer Management Lab 9-10 Map shares to drive letters Lab 9-11 Display CIFS sessions Lab 10-1 Configure your storage system for multiprotocol access Lab 11-1 No exercise Lab 12-1 Identify the components of your SAN environment Lab 13-1 No exercise Lab 14-1 Configure iscsi on a storage system Lab 14-2 Configure Windows for Multipath I/O Lab 14-3 Install NetApp DSM on Windows Lab 14-4 Install the Host Utilities Kit on Windows (HUK) Lab 14-5 Configure iscsi on Windows Lab 14-6 Confirm iscsi session on a storage system

7 Lab 14-7 Confirm the second iscsi session on Windows Lab 14-8 Confirm the second iscsi session on a storage system Lab 14-9 Install the Host Utilities Kit on Linux (HUK) Lab Install the iscsi software initiator for Linux Lab Configure iscsi software initiator on Linux Lab Confirm iscsi sessions on a storage system Lab 15-1 Create a LUN with separate commands Lab 15-2 Initialize a LUN with Disk Management Lab 15-3 Provision a LUN with Disk Management Lab 15-4 Persist the mounting of a LUN Lab 15-5 Create iscsi-attached LUNs for Red Hat Linux Lab 15-6 Discover iscsi-accessible LUNS from Red Hat Linux Lab 15-7 Prepare an individual LUN and mount it on Red Hat Linux Lab 16-1 Identify the exercise environment (Availability Overview) Lab 17-1 Create a Snapshot Copy using NetApp System Manager Lab 17-2 Restoring a Windows file from a Snapshot copy Lab 17-3 Restoring a Unix file from a Snapshot copy Lab 17-4 Manage Snapshot copies using NetApp System Manager Lab 17-5 Create a FlexClone using the command line interface Lab 18-1 License and configure SnapRestore Lab 18-2 Perform a volume SnapRestore Lab 18-3 Perform a file SnapRestore Lab 19-1 Identify primary and secondary systems Lab 19-2 Configure SnapVault on the primary system Lab 19-3 Configure SnapVault on the secondary system Lab 19-4 Initialize the transfer Lab 19-5 Perform a restore Lab 19-6 Restart the backup relationship Lab 20-1 Install Open Systems SnapVault for Windows Server Lab 20-2 Configure the SnapVault secondary system Lab 20-3 Configure Windows server 2008 R2 s firewall for Open System SnapVault Lab 20-4 Establish the Open Systems SnapVault baseline Lab 20-5 Perform a restore and resume SnapVault operations Lab 21-1 License and configure controller failover Lab 21-2 Perform a controller failover Lab 21-3 Perform a controller giveback Lab 22-1 No exercise Lab 23-1 Identify the source and destination systems Lab 23-2 Set up SnapMirror on the source storage system Lab 23-3 Set up SnapMirror on the destination storage system Lab 23-4 Initiate a baseline transfer and schedule updates Lab 23-5 Break the SnapMirror relationship Lab 23-6 Resynchronizing the relationship Lab 23-7 Reinstate the original SnapMirror relationship Lab 23-8 Configure Synchronous SnapMirror Lab 24-1 No exercise