QuickSpecs. HP ProLiant SL390s Generation 7 (G7) Overview

Transcription

1 Overview The HP ProLiant SL390s G7 server is part of a new family, HP ProLiant SL6500 Scalable System, of HP server solutions optimized for scale-out customers to greatly reduce costs, maximize power efficiency, by sharing power supplies and fans, and maintain total flexibility. The SL390s G7 consists of three different server trays, each with their own benefits. The 1U half width tray is designed for compute density, and the 2U and 4U half width trays are designed for GPU density, support is up to 3 GPUs in the 2U and 8 GPUs in the 4U tray. They each use the same system board and go into the 4U HP ProLiant s6500 Chassis. The SL390s G7 is a two socket Intel server with 12 DDR3 DIMM sockets, two 1 Gb Ethernet ports, one 10 Gb Ethernet port (SFP+) and an option on board InfiniBand port (QSFP). The SL390s G7 1U half width server tray support a low profile x16 gen 2 PCI-e slot and two 3.5" or four 2.5" hard drives. The SL390s G7 2U half width server trays support a low profile x8 gen2 PCI-e slot, while also supporting three internal x16 gen2 slots dedicated for three GPU's (up to 225 watts each). The SL390s G7 4 U half width server tray support a low profile x8 gen2 PCI-e slot, while also supporting eight internal x16 gen2 slots dedicated for eight GPU's (up to 225 watts each) 1U Open View: 1U Front View: 1. Two 3.5" or four 2.5" non-hot plug hard drives using a quick 1. Low profile x16 PCI-e Gen 2 release drive carrier DDR3 DIMM Slots 2. Optional Infiniband port (QSFP) 3. Support for up to two Intel 5600 sequence processors 3. 1Gb Ethernet port 4. ilo3 dedicated management port 5. UID LED 6. 2 front USB ports 7. 1 Gb Ethernet port 8. 10Gb Ethernet port (SFP+) 9. Power Button 10. Serial port (RJ45) 11. Video Port c DA NorthAmerica Version 29 November 1, 2014 Page 1

2 Overview 2U Open View: 2U Front View: 1. Support for up to two GPUs 1. Video Port 2. Support for 1 GPU 2. Serial port (RJ45) 3. Two internal non-hot plug 2.5" hard drives 3. Power Button 4. Four 2.5" hot plug hard drives 4. 10Gb Ethernet port (SFP+) 5. Optional Infiniband port (QSFP) 6. Health LED 7. (2) 1Gb Ethernet ports 8. 2 front USB ports 9. ilo3 dedicated management port 10. UID LED 4U Open View: 4U Front View: 1. Support for 4 rear GPUs 1. Video Port 2. Support for 4 front GPUs 2. Serial port (RJ45) 3. Eight 2.5" hot plug hard drives 3. Power Button c DA NorthAmerica Version 29 November 1, 2014 Page 2

3 Overview 4. 10Gb Ethernet port (SFP+) 5. Optional InfiniBand port (QSFP) 6. (2) 1Gb Ethernet ports 7. 2 front USB ports 8. ilo3 dedicated management port 9. UID LED What's New Support for new HP hard drive c DA NorthAmerica Version 29 November 1, 2014 Page 3

4 Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor Six-Core Processor One of the following Intel Xeon X5690 (3.46GHz/6-core/12MB/130W), DDR3-1333, HT, Turbo 1/1/1/1/2/2) Processor depending on Model Intel Xeon X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor Intel Xeon E5645 (2.40GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 1/1/1/1/2/3) Processor Intel Xeon E5649 (2.53GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 1/1/1/1/2/2) Processor Quad-Core Processors Intel Xeon X5687 (3.60GHz/4-core/12MB/130W, DDR3-1333, HT, Turbo 1/1/2/2) Processor Intel Xeon X5672 (3.20GHz/4-core/12MB/95W, DDR3-1333, HT, Turbo 1/1/2/2) Processor Intel Xeon E5607 (2.26GHz/4-core/8MB/80W, DDR3-1333, HT, Turbo 1/1/2/2/3/3) Processor Intel Xeon E5606 (2.13 GHz/4-core/8MB/80W,DDR3-1066, HT, Turbo 1/1/2/2/3/3) Processor Intel Xeon E5603 (1.60GHz/4-core/4MB/80W, DDR3-1066) Processor NOTE: 130 watt processors are available in all 3 form factors, and can utilize the redundant fan kit. NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed. NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream), and "L" denotes Lower Wattage. NOTE: Up to 2 processors supported. Mixing different processor models is not supported. NOTE: GPUs are not supported with configurations consisting of a single CPU Cache Memory One of the following depending on Model Chipset Upgradeability Memory Protection 12MB (1 x 12MB) Level 3 cache NOTE:For all 5600 sequence processors. 8MB (1 x 8MB) Level 3 cache NOTE: For E5607 and E5606 processors. 4MB (1 x 4MB) Level 3 cache NOTE: For E5603 processor. Intel 5520 Chipset NOTE: For more information regarding Intel chipsets, please see the following URL: Upgradeable to two processors Advanced ECC (multi-bit error protection) Lock-step mode Memory Type DDR3 Registered (RDIMM) or Unbuffered (UDIMM) Maximum (RDIMM) (per server tray) 192GB (12 x 16GB) for Registered Memory configurations Maximum (UDIMM) (per 48GB (12 x 4GB) for Unbuffered Memory configurations server tray) NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at: c DA NorthAmerica Version 29 November 1, 2014 Page 4

5 Standard Features NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: Network Controller Expansion Slots HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC543i 2-port 4xQDR IB/10Gb Adapter For SL390s 1U half width server: Up to one available PCI Express 2.0 slots: Standard Slot 1: low-profile x16 PCI-Express 2.0 For SL390s 2U half width server: Up to four available PCI Express 2.0 slots: Standard Slot 1: low-profile x8 PCI-Express 2.0 Internal Slots 3: x16 PCI-express 2.0 for internal GPU (up to 225 watts) support For SL390s 4U half width server: Up to nine available PCI Express 2.0 slots: Standard Slot 1: low-profile x8 PCI-Express 2.0 Internal Slots 8: x16 PCI-express 2.0 for internal GPU (up to 225 watts/gpu) support Expansion Slots # Technology Bus Width** Connector Width Form Factor Notes 1 PCI-Express 2.0 x16 x16 Low Profile 3.3 volts ** Indicates the number of physical electrical lanes running to the connector. Storage Controller HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10) per server node NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA Raid controller, To enable use of the B110i, enter the ROM based setup utility(rbsu). The option for enabling RAID can be found in the advanced section of the RBSU. For additional details NOTE: Transfer rate: 3.0 Gb/s SATA. NOTE: A HP Smart Array controller is required for SAS Hard Drives NOTE: An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD. Internal Storage Devices Diskette Drives Optical Drives Hard Drives Via USB only DVD / CD drives via USB only External support only. None ship standard SL390s 1U half width server SL390s 2U half width server SL390s 4U half width server Support for up to two 3.5" or four 2.5" non-hot plug hard drives using a quick release drive carrier Support for up to four 2.5" hot plug hard drives Support for up to two internal 2.5" non-hot plug hard drives using a quick release drive carrier Support for up to eight 2.5" hot plug hard drives c DA NorthAmerica Version 29 November 1, 2014 Page 5

6 Standard Features Maximum Internal Storage 1U Half Width tray Non-Hot Plug SATA 3.5" 4.0 TB 2 x 2TB Non-Hot Plug SATA 2.5" 2.0 TB 4 x 500GB Non-Hot Plug SAS 3.5" 4.0TB 2 x 2TB Non-Hot Plug SAS 2.5" 1.2TB 4 x 300GB Hot Plug SATA SSD 2.5" 1.6TB 4 x 400GB Non-Hot Plug SSD 2.5" 1.6TB 4 x 400GB 2U Half width tray Hot Plug SATA 2.5" 2.0TB 4 x 500GB Hot Plug SAS 2.5" 3.6TB 4 x 900GB Hot Plug SSD 2.5" 480GB 4 x 120GB Hot Plug SATA SSD 2.5" 1.6TB 4 x 400GB Non-Hot Plug SAS 2.5" 1.2TB 4x300GB Non-Hot Plug SSD 2.5" 1.6TB 4x400GB 4U Half width tray Hot Plug SATA 2.5" 4.0TB 8 x 500GB Hot Plug SAS 2.5" 4.0TB 8 x 500GB Hot Plug SSD 2.5" 3.2TB 8 x 400GB Hot Plug SATA SSD 2.5" 3.2TB 8 x 400GB Interfaces Parallel None Network RJ-45 Serial (RJ-45) 1 Graphics 1 Micro SD 1 USB Management Health LED Power UID Two 10/100/1000 NIC ports One 10GB SPF+ One optional IB (QSFP) 3 (two front, 1 internal) 1 Dedicated ilo3 Management Port 1 front 1 front 1 front Industry Standard Compliance Graphics Server Power Cords ACPI 2.0b Compliant PCI 2.2 Compliant WOL Support Microsoft Logo certifications PXE Support USB 1.1 and 2.0 Compliant SMBIOS ATI RN50/ES1000 w/ 64MB memory One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant SL servers are primarily connected to PDU's in data center racks so they ship standard with only a PDU power cord ( B21). c DA NorthAmerica Version 29 November 1, 2014 Page 6

7 Standard Features NOTE: If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: HP Common Slot Power Supplies System Fans Operating Systems and Virtualization Software Support for ProLiant Servers Form Factor HP has a new design for ProLiant power. The new Common Slot Power Supply provides the customer with commonality in power supplies across multiple platforms to save on the cost of spares and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers come with or compatible with high-efficiency HP CS Power Supplies. These power supplies are designed for highest efficiency to provide power efficiency without degrading performance of the ProLiant server. HP CS Power Supplies options for this server will have efficiency ratings up to 94%. There are six power options available, depending on the configuration of your server. To make sure you select the correct power supply to meet your configuration, we suggest that you use the HP Power Advisor to decide the "Right-Size" for your configuration. All HP Common Slot power sources are UL, CE Mark Compliant, Hot Plug and Redundant (redundancy dependent on node configurations). Non redundant model - 8 fans required Redundant model - redundant fan kit required NOTE: all 8 fan bays must be populated with either redundant or non-redundant fans NOTE: mixing and matching of fans is not allowed Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) VMware ESX NOTE: For more information on HP's Certified and ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server including how to purchase from HP, please visit our OS Support Site at: HP ProLiant s6500 Chassis - 4U HP ProLiant SL390s G7 1U half width server tray HP ProLiant SL390s G7 2U half width server tray HP ProLiant SL390s G7 4U half width server tray HP Insight management software HP Insight Foundation Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters. HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecycle. This provides the customer with higher levels of operational efficiency and highly reliable systems: The foundation pack includes: HP SmartStart HP Management DVD HP ProLiant Smart Update Firmware DVD SmartStart version supported (minimum): SmartStart NOTE: In an effort to support reducing our environmental impact, the HP c DA NorthAmerica Version 29 November 1, 2014 Page 7

8 Standard Features HP Integrated Lights-Out 3 (ilo 3) Insight Foundation Suite for ProLiant media will be available as a selectable option for this server at time of order of a CTO SKU. This will allow customers to order the number of media kits that best meet their needs and eliminate receiving unnecessary duplicate media. HP Integrated Lights-Out 3 (ilo) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP ilo functions without additional software and can be accessed from any location via a web browser. HP ilo works hand-in-hand with HP Systems Insight Manager, Insight Control suites, and Insight Dynamics for ProLiant, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service. For more information, visit: Security Warranty Power-on password Keyboard password QuickLock, Network Server Mode Serial interface control Administrator's password ilo 3 (Integrated Lights-Out 3) has 12 customizable user accounts and SSL encryption ilo 3 can be disabled via a Global Setting ilo Advanced supports directory services integration This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty. NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: c DA NorthAmerica Version 29 November 1, 2014 Page 8

9 Optional Features HP Insight management software HP Insight Control HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. For more information, see HP Insight Dynamics for ProLiant HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, see: HP Insight Dynamics for ProLiant, a product option, is advanced infrastructure management software that enables IT staff to instantly adjust their environments to meet dynamic business demands by provisioning, optimizing and protecting complex infrastructure in minutes. It's a powerful toolkit, integrated-by-design, that accelerates complex technology projects and simplifies daily operations, transforming data center economics. With Insight Dynamics IT professionals can plan capacity and power continuously, balance workloads across physical and virtual resources, and ensure cost-effective high availability. It also enables IT organizations to provision infrastructure consistently and automatically from pools of shared resources using a self-service portal. Resources provisioned can range from a single virtual machine to complex multi-tier environments and their associated physical and virtual resource requirements. In addition to the previous functional benefits, it also provides a cost-effective disaster recovery for physical and virtual environments that works with HP Continuous Access software for both the Enterprise Virtual Array and the XP storage array allowing application environments to be reactivated in minutes with the touch of a button to a remote location. NOTE: For more information, visit: High Performance Clusters HP Cluster Platforms HP HPC Interconnects HP Cluster Management Utility HP HPC Linux Value Pack HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator simplifies ordering. High Performance Computing (HPC) interconnect technologies are available for this server as part of the HP Cluster Platform portfolio. These highspeed InfiniBand and Gigabit interconnects are fully supported by HP when integrated within an HP cluster. Flexible, validated solutions can be defined with the help of configuration tools. HP Cluster Management Utility (CMU) is an HP-licensed and HP-supported suite of tools that are used to manage large-scale Linux ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective. HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported specially priced software bundle for the development and deployment of applications on HPC Cluster Platforms. Value Pack includes the Platform HPC Enterprise Edition suite of tools including the LSF workload scheduler, c DA NorthAmerica Version 29 November 1, 2014 Page 9

10 Optional Features Factory Express Portfolio for Servers and Storage the HP-MPI parallelization library. Also included are the HP Unified Parallel C compiler and the HP Shmem library, as well as the execution environments for the libraries and compiler. HP HPC Linux Value Pack HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services for your specific server model please contact your sales representative or go to: HP Simple Configurator GPU Computing Modules SCE is a guided self service tool to help sales and non technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance. Each SL390s 2U tray will accommodate up to three GPUs, with options including HP NVIDIA Tesla M2050, M2070, M2070Q and M2090 computational accelerator modules. Each SL390s 4U tray will accommodate up to eight GPUs, with options including NVIDIA Tesla M2050, M2070, M2070Q and M2090 computational accelerator modules. The NVIDIA M2070Q module enables computational acceleration as well as high-end QUADRO graphics. The other modules are primarily for computational acceleration. NOTE: The ambient temperature for SL390s 2U systems with between one and three NVIDIA M2090 GPUs, must be 30 degrees Celsius or less. The ambient temperature for SL390s 4U systems with between five and eight NVIDIA M2090 GPUs, must be 30 degrees Celsius or less. All other SL390s systems may be operated with ambient temperatures up to 35 degrees Celsius. NOTE: When adding GPU solutions to the SL390 2U & 4U servers one must utilize the HP 1200W CS Platinum Power Supply Kit, B21, for all four power supply slots. NOTE: GPU power consumption is managed dynamically in order to optimize performance within acceptable GPU power limits. The power limits are system-dependent. For SL390 2U systems with up to 2 GPUs, and for SL390 4U systems with up to 6 GPUs, the GPU power-cap is set to 250 watts. For all other GPU configurations, the GPU power-cap is set to 225 watts." c DA NorthAmerica Version 29 November 1, 2014 Page 10

11 Service and Support Service and Support THE SL390s tray is a part of the HP ProLiant s6500 Chassis. Support for these tray need to be purchased at a chassis level. Please refer to HP ProLiant s6500 Chassis quick spec documentation for details. HP Technology Services for Industry Standard Servers HP Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to HP to help prevent problems and solve issues faster. Our support technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay informed and in control, anywhere, any time. Protect your business beyond warranty with HP Care Pack Services HP Care Pack Services enable you to order the right service level, length of coverage and response time as you purchase your new server, giving you full entitlement for the term you select. Get connected to HP to improve your support experience Parts and Materials Prevent problems with innovative, automated monitoring tools and proactive services. Combining Proactive Care Services with our remote support technology such as Insight Online provides you with expert advice and personalized, cloud-based automated IT support, helping to prevent unplanned down time and solve problems quickly. For more information, visit: HP will provide HP-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements. Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services. The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: c DA NorthAmerica Version 29 November 1, 2014 Page 11

12 Pre-configured Models NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this. NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately. NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this. NOTE: Not all models are available in all regions. Check with your local country HP offices for availability. NOTE: Server SKUs below are the server tray only, a chassis is needed to run servers. NOTE: Mixing and matching of half width trays is supported - See s6500 Tray mixing support plan. NOTE: 130 watt processors are available in all 3 form factors, and can utilize the redundant fan kit. NOTE: The ambient temperature for SL390s 2U systems with between one and three NVIDIA M2090 GPUs, must be 30 degrees Celsius or less. The ambient temperature for SL390s 4U systems with between five and eight NVIDIA M2090 GPUs, must be 30 degrees Celsius or less. All other SL390s systems may be operated with ambient temperatures up to 35 degrees Celsius. NOTE: When adding GPU solutions to the SL390 2U & 4U servers one must utilize the HP 1200W CS Platinum Power Supply Kit, B21, for all four power supply slots. HP ProLiant SL390s G7 1U Server Base Models HP ProLiant SL390s G7 1U Left Half Width Tray X5650 1P 12GB-R B110i Base Server B21 HP ProLiant SL390s G7 1U Right Half Width Tray X5650 1P 12GB-R B110i Base Server B21 Entry Models HP ProLiant SL390s G7 1U Left Half Width Tray E5620 1P 6GB-R B110i Entry Server B21 HP ProLiant SL390s G7 1U Right Half Width Tray E5620 1P 6GB-R B110i Entry Server B21 Processor(s) Cache Memory Memory Network Controller (1) Intel Xeon Processor X5650 (2.66 GHz, 12MB L3 Cache, 95 Watts, DDR3-1333, HT Turbo 2/2/2/2/3/3) 12MB (1 x 12MB) Level 3 cache 12 GB (3 x 4 GB) PC R (DDR3-1333) Registered DIMM NOTE: Total of 12 DIMM slots. HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC543i 2-port 4xQDR IB/10Gb Adapter Storage Controller HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10) Hard Drive Internal Storage Optical Drive Power Supply Fans Form Factor Warranty Processor(s) Cache Memory Memory None ship standard 2 LFF or 4 SFF Hard drives None ship standard Chassis sold separately Chassis sold separately 1U Half Width server tray Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year onsite service (1) Intel Xeon Processor E5620 (2.40 GHz, 12MB L3 Cache, 80 Watts, DDR3-1066, HT Turbo 1/1/2/2) 12MB (1 x 12MB) Level 3 cache 6 GB (3 x 2 GB) PC R (DDR3-1333) Registered DIMM NOTE: Total of 12 DIMM slots. Network Controller HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC543i 2-port 4xQDR IB/10Gb Adapter Storage Controller HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10) Hard Drive Internal Storage Optical Drive None ship standard 2 LFF or 4 SFF Hard drives None ship standard c DA NorthAmerica Version 29 November 1, 2014 Page 12

13 Pre-configured Models Power Supply Fans Form Factor Warranty Chassis sold separately Chassis sold separately 1U Half Width server tray Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year onsite service HP ProLiant SL390s G7 2U Server Base Models HP ProLiant SL390s G7 2U Left Half Width Tray X5650 1P 12GB-R B110i Base Server B21 HP ProLiant SL390s G7 2U Right Half Width Tray X5650 1P 12GB-R B110i Base Server B21 Entry Models HP ProLiant SL390s G7 2U Left Half Width Tray E5620 1P 6GB-R B110i Entry Server B21 HP ProLiant SL390s G7 2U Right Half Width Tray E5620 1P 6GB-R B110i Entry Server B21 Processor(s) Cache Memory Memory Network Controller (1) Intel Xeon Processor X5650 (2.66 GHz, 12MB L3 Cache, 95 Watts, DDR3-1333, HT Turbo 2/2/2/2/3/3) 12MB (1 x 12MB) Level 3 cache 12 GB (3 x 4 GB) PC R (DDR3-1333) Registered DIMM NOTE: Total of 12 DIMM slots. HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC543i 2-port 4xQDR IB/10Gb Adapter Storage Controller HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10) Hard Drive Internal Storage Optical Drive Power Supply Fans Form Factor Warranty Processor(s) Cache Memory Memory None ship standard 4 SFF Hard drives None ship standard Chassis sold separately Chassis sold separately 1U Half Width server tray Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year onsite service (1) Intel Xeon Processor E5620 (2.40 GHz, 12MB L3 Cache, 80 Watts, DDR3-1066, HT Turbo 1/1/2/2) 12MB (1 x 12MB) Level 3 cache 6 GB (3 x 2 GB) PC R (DDR3-1333) Registered DIMM NOTE: Total of 12 DIMM slots. Network Controller HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC543i 2-port 4xQDR IB/10Gb Adapter Storage Controller HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10) Hard Drive Internal Storage Optical Drive Power Supply Fans Form Factor Warranty None ship standard 4 SFF Hard drives None ship standard Chassis sold separately Chassis sold separately 1U Half Width server tray Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year onsite service HP ProLiant SL390s G7 4U Server Performance Models HP ProLiant SL390s G7 4U Left Half Width Tray X5672 2P 24GB Server Processor(s) Cache Memory (2) Intel Xeon Processor X5672 (3.20 GHz, 12MB L3 Cache, 95 Watts, DDR3-1066, HT Turbo 2/2/3/3) 12MB (1 x 12MB) Level 3 cache c DA NorthAmerica Version 29 November 1, 2014 Page 13

14 Pre-configured Models B21 HP ProLiant SL390s G7 4U Right Half Width Tray X5672 2P 24GB Server B21 Base Models HP ProLiant SL390s G7 4U Left Half Width Tray X5650 1P 12GB Server B21 HP ProLiant SL390s G7 4U Right Half Width Tray X5650 1P 12GB Server B21 Memory 24 GB (6 x 4 GB) PC R (DDR3-1333) Registered DIMM NOTE: Total of 12 DIMM slots. Network Controller HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC543i 2-port 4xQDR IB/10Gb Adapter Storage Controller HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10) Hard Drive Internal Storage Optical Drive Power Supply Fans Form Factor Warranty Processor(s) Cache Memory Memory Network Controller None ship standard 8 SFF Hard drives None ship standard Chassis sold separately Chassis sold separately 1U Half Width server tray Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year onsite service (1) Intel Xeon Processor X5650 (2.66 GHz, 12MB L3 Cache, 95 Watts, DDR3-1333, HT Turbo 2/2/2/2/3/3) 12MB (1 x 12MB) Level 3 cache 12 GB (3 x 4 GB) PC R (DDR3-1333) Registered DIMM NOTE: Total of 12 DIMM slots. HP NC362i Integrated Dual Port Gigabit Server Adapter HP NC543i 2-port 4xQDR IB/10Gb Adapter Storage Controller HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10) Hard Drive Internal Storage Optical Drive Power Supply Fans Form Factor Warranty None ship standard 8 SFF Hard drives None ship standard Chassis sold separately Chassis sold separately 1U Half Width server tray Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year onsite service HP ProLiant s6500 chassis HP ProLiant s6500 3/1200 Redundant Fan Chassis B21 Power Supply Fans Form Factor Tray blank Power supply blanks (3) 1200W (94% efficient) Hot Plug Power Supplies (8) hot plug redundant fans 4U chassis 1 tray blank 1 power supply blank HP ProLiant s6500 2/1200 Non Redundant Fan Chassis B21 Power Supply Fans Form Factor Tray blank Power supply blanks (2) 1200W (94% efficient) Hot Plug Power Supplies (8) cold plug fans 4U chassis 1 tray blank 2 power supply blank S6500 tray mixing support plan NOTE: s6500 is a 4U chassis and has a left and a right side. NOTE: The picture below show how each half of the chassis can be configured. c DA NorthAmerica Version 29 November 1, 2014 Page 14

15 Pre-configured Models NOTE: This shows mixing and matching of half width trays. NOTE: 2U half width tray is NOT supported in middle 2 bays. 1U ½ Width 1U ½ Width 1U ½ W 1U ½ W 2U ½ W 2U ½ W 1U ½ W 1U ½ W 2U ½ W 2U ½ W 1U ½ W 1U ½ W 4U ½ W c DA NorthAmerica Version 29 November 1, 2014 Page 15

16 Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis. NOTE: FIO indicates that this option is only available as a factory installable option. NOTE: If you already have an s6500 chassis skip to Step 1A. Step 1: Select Nodes NOTE: Mixing and matching of half width trays is supported in the s6500 chassis. NOTE: If you do not fill up chassis with servers, the HP node blank Kit B21 needs to be ordered for each half width 1U space unpopulated. HP Server Nodes HP ProLiant SL390s G7 1U Right Tray Node Server B21 HP ProLiant SL390s G7 1U Left Tray Node Server B21 HP ProLiant SL390s G7 2U Right Half Tray Node Server B21 HP ProLiant SL390s G7 2U Left Half Tray Node Server B21 HP ProLiant SL390s G7 4U Right Half Tray Node Server B21 HP ProLiant SL390s G7 4U Left Half Tray Node Server B21 Step 2: Choose Required Node Options (only one of the following from each list unless otherwise noted) HP Processors NOTE: If 2 processors are desired, select one xxxxx-l21 and one xxxxxx-b21. NOTE: 130 watt processors are available in all 3 form factors, and can utilize the redundant fan kit. Six-Core Processors HP SL390s G7 Intel Xeon X5690 (3.46GHz/6-core/12MB/130W) FIO Processor Kit L21 HP SL390s G7 Intel Xeon X5675 (3.06GHz/6-core/12MB/95W) FIO Processor Kit L21 HP SL390s G7 Intel Xeon E5645 (2.53GHz/6-core/12MB/80W) FIO Processor Kit L21 HP SL390s G7 Intel Xeon E5649 (2.53GHz/6-core/12MB/80W) FIO Processor Kit L21 Quad-Core Processors HP SL390s G7 Intel Xeon X5687 (3.60GHz/4-core/12MB/130W) FIO Processor Kit L21 HP SL390s G7 Intel Xeon X5672 (3.20GHz/4-core/12MB/95W) FIO Processor Kit L21 HP SL390s G7 Intel Xeon E5603 (1.60GHz/4-core/4MB/80W) FIO Processor Kit L21 HP Memory Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors. HP 16GB (1x16GB) Quad Rank x4 PC (DDR3-1066) Registered CAS-7 Memory Kit HP 8GB (1x8GB) Dual Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit B B B B B B21 c DA NorthAmerica Version 29 November 1, 2014 Page 16

17 Configuration Information - Factory Integrated Models HP 8GB (1x8GB) Dual Rank x4 PC3L (DDR3-1333) Registered CAS-9 Low Power Memory Kit HP 16GB (1x16GB) Dual Rank x4 PC3L (DDR3-1333) Registered CAS-9 LP Memory Kit HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors. Unbuffered with ECC DIMMs (UDIMMs) HP 1GB (1x1GB) Single Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 2GB (1x2GB) Dual Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC3L (DDR3-1333) Unbuffered CAS-9 Low Power Memory Kit NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel) NOTE: PC3L is a low voltage memory. NOTE: Memory Min and Max depends on number of processors and type of memory: B B B B B B B21 1. Processor -> R-Dimm: Min 1 // Max 6 U-Dimm: Min 1 // Max Processors -> R-Dimm: Min 2 // Max 6 U-Dimm: Min 2 // Max 12 Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted) Riser Cards HP Storage Controllers HP SL390 PCIe Riser x16 FIO Card Kit NOTE: For additional Riser card options refer to the Unique Options section of this. Only FIO options are displayed here. HP Smart Array P212/256 BBWC 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller NOTE: HP P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P212 controller ( B21) HP Smart Array P410/ZM 2-ports Int PCIe x8 FIO SAS Controller NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller ( B21) HP Smart Array P410/256 BBWC 2-ports Int PCIe x8 FIO SAS Controller NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using the P410 controller ( B21) HP Smart Array P411/256 BBWC 2-ports Ext PCIe x8 FIO SAS Controller NOTE: For additional Storage Controller options refer to the Additional Options section of this. Only FIO options are displayed here. Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below B B B B B21 c DA NorthAmerica Version 29 November 1, 2014 Page 17

18 Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. HP Unique Options HP SL390s Small Form Factor (SFF) Enablement Kit NOTE: required for every 2 SFF drives being added to the 1U tray. HP SL390 2 Graphics Processing Unit Riser Kit NOTE: riser need when adding 2 GPUs to 2U tray. HP SL390 Single Graphics Processing Unit Riser Kit NOTE: needed when adding 1 GPU to 2U tray. NOTE: also needed if adding 3rdd GPU to 2U tray B B B21 HP Processors Six-Core Processors HP SL390s G7 Intel Xeon X5690 (3.46GHz/6-core/12MB/130W) Processor Kit B21 HP SL390s G7 Intel Xeon X5675 (3.06GHz/6-core/12MB/95W) Processor Kit B21 HP SL390s G7 Intel Xeon E5645 (2.40GHz/6-core/12MB/80W) Processor Kit B21 HP SL390s G7 Intel Xeon E5649 (2.53GHz/6-core/12MB/80W) Processor Kit B21 Quad-Core Processors HP SL390s G7 Intel Xeon X5687 (3.60GHz/4-core/12MB/130W) Processor Kit B21 HP SL390s G7 Intel Xeon X5672 (3.20GHz/4-core/12MB/95W) Processor Kit B21 HP SL390s G7 Intel Xeon E5607 (2.26GHz/4-core/8MB/80W) Processor Kit B21 HP SL390s G7 Intel Xeon E5606 (2.13GHz/4-core/8MB/80W) Processor Kit B21 HP SL390s G7 Intel Xeon E5603 (1.60GHz/4-core/4MB/80W) Processor Kit B21 NOTE: 130 watt processors are available in all 3 form factors, and can utilize the redundant fan kit. NOTE: HT indicates that the processor model supports Intel Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency increment when using Intel Turbo Boost Technology, with 4, 3, 2, and 1 cores active. NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed. NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage. HP Memory Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors. HP 16GB (1x16GB) Quad Rank x4 PC (DDR3-1066) Registered CAS-7 Memory Kit HP 8GB (1x8GB) Dual Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit B B B B B B21 c DA NorthAmerica Version 29 November 1, 2014 Page 18

19 Core Options HP 8GB (1x8GB) Dual Rank x4 PC3L (DDR3-1333) Registered CAS-9 Low Power Memory Kit HP 16GB (1x16GB) Dual Rank x4 PC3L (DDR3-1333) Registered CAS-9 LP Memory Kit HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors. Unbuffered with ECC DIMMs (UDIMMs) HP 1GB (1x1GB) Single Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 2GB (1x2GB) Dual Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC3L (DDR3-1333) Unbuffered CAS-9 Low Power Memory Kit NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel) NOTE: PC3L is a low voltage memory. NOTE: Memory Min and Max depends on number of processors and type of memory: B B B B B B B21 1. Processor -> R-Dimm: Min 1 // Max 6 U-Dimm: Min 1 // Max Processors -> R-Dimm: Min 2 // Max 6 U-Dimm: Min 2 // Max 12 HP Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty. NOTE: The non-hot plug hard drives use a quick release carrier. NOTE: Hot plug hard drives are for 2U and 4U trays only. NOTE: non hot plug with quick release carrier are used in 1U tray and internal to the 2U tray. SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard Drive HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives B B B B B21 c DA NorthAmerica Version 29 November 1, 2014 Page 19

20 Core Options HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive B21 HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive B21 SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Quick-release Dual Port Midline 1yr Warranty Hard Drive NOTE: Please see the for Technical Specifications and additional information: (Worldwide) SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives B B B B21 HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive B21 HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive B21 SATA Quick Release SFF (2.5-inch) Midline (MDL) Drives HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Quick-release Midline 1yr Warranty Hard Drive SATA Quick Release LFF (3.5-inch) Midline (MDL) Drives HP 3TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick Release Midline 1yr Warranty Hard Drive HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive NOTE: Please see the for Technical Specifications and additional information: (Worldwide) 3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives HP 400GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State Drive HP 200GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State Drive HP 100GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State Drive 3G SATA MLC Quick Release SFF (2.5-inch) Enterprise Mainstream Solid State Drives HP 400GB 3G SATA MLC SFF (2.5-inch) Quick-release Enterprise Mainstream 3yr Wty Solid State Drive HP 200GB 3G SATA MLC SFF (2.5-inch) Quick-release Enterprise Mainstream 3yr Wty Solid State Drive B B B B B B B B B B21 c DA NorthAmerica Version 29 November 1, 2014 Page 20

21 Core Options HP 100GB 3G SATA MLC SFF (2.5-inch) Quick-release Enterprise Mainstream 3yr Wty Solid State Drive 6G SAS SLC Hot Plug Enterprise Performance Solid State Drives HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State Drive HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid State Drive 6G SAS MLC Hot Plug Enterprise Mainstream Solid State Drives HP 800GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State Drive HP 400GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State Drive HP 200GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State Drive RECOMMENDATION: For best performance of SSD drives it is recommended that any Smart Array Controller use a max of 4 drives. For this product a second Smart Array option can be used for the second set of 4 SSD drives. NOTE: Please see the for Technical Specifications and additional information: NOTE: HP P212 SAS 4HDD Cable Kit ( B21) is needed when adding more than two 2.5" hard drives. NOTE: The non-hot plug hard drives use a quick release carrier. NOTE: When Adding SAS to the 4U, the SL390s 4U SAS enablement kit ( B21) plus an HP Smart Array controller must be ordered NOTE: When Adding SAS to the 2U, the SL390s 2U SAS enablement kit ( B21) plus an HP Smart Array controller must be ordered NOTE: When Adding SAS to the 1U one of 4 options needs to be added HP 2x170 P212 SAS 2 Hard Drive Power Cable Kit NOTE: this is required when add two 3.5" SAS drive to the 1U tray B21 HP z6000 P212 SAS 4 Hard Drive Power Cable Kit NOTE: this is required when add four 3.5" SAS drive to the 1U tray B21 NOTE: Hot plug hard drives are for 2U and 4U tray only. NOTE: non hot plug with quick release carrier are used in 1U tray and internal to the 2U tray B B B B B B21 HP Networking Gigabit Ethernet Adapters HP NC112T PCI Express Gigabit Server Adapter B21 HP NC360T PCI-E Dual Port Gigabit Server Adapter B21 HP NC365T 4-port Ethernet Server Adapter B21 HP NC373F PCI-E Multifunction 1000SX Gigabit Svr Adapter B21 HP NC373T PCI-E Multifunction Gigabit Server Adapter B21 HP NC375T PCI Express Quad Port Gigabit Server Adapter B21 HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter B21 10 Gigabit Ethernet adapters NOTE: The SL390s G7 supports only the low-profile version of the 10GbE Ethernet Adapters. NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. c DA NorthAmerica Version 29 November 1, 2014 Page 21

22 Core Options HP NC522SFP Dual Port 10GbE Gigabit Server Adapter B21 HP NC550SFP Dual Port 10GbE Server Adapter B21 HP NC552SFP 10Gb 2-port Ethernet Server Adapter B21 NOTE: Please see the for Technical Specifications and additional information: HP 10 GbE PCI-e G2 Dual Port Network Interface Card B21 HP InfiniBand HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA B21 QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA B21 HP InfiniBand Enablement Kit B21 NOTE: Please see the for additional information: HP I/O Expansion Options HP SL390 2 Graphics Processing Unit Riser Kit B21 HP SL390 Single Graphics Processing Unit Riser Kit B21 c DA NorthAmerica Version 29 November 1, 2014 Page 22

23 Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. HP Insight Software HP Insight Control HP Insight Control including 1yr 24x7 Technical Support and Updates Flexible Quantity License HP Insight Management Media Kit NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and Virtual Connect Enterprise Manager software. Uses an integrated installer to perform quick and accurate software installation and updates. HP Integrated Lights-Out (ilo) Advanced for ProLiant Remote Management HP ilo Advanced including 1yr 24x7 Technical Support and Updates Electronic License HP ilo Advanced Electronic License with 3yr 24x7 Tech Support and Updates HP ilo Advanced including 1yr 24x7 Technical Support and Updates Flexible Quantity License HP ilo Advanced Flexible Qty License with 3yr 24x7 Tech Support and Updates B B21 TA850AAE BD506AAE B21 BD506A HP ilo Advanced including 1yr 24x7 Technical Support and Updates Tracking License B21 HP ilo Advanced Tracking License with 3yr 24x7 Tech Support and Updates NOTE: This license allows 1 server to be deployed and managed via HP ilo Advanced. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits, including electronic delivery options, please see the ilo at: HP Insight Control server deployment HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License HP Insight Control Server Deployment including 1yr 24x7 Support Single Server License NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single activation key. NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Management Media Kit can be ordered separately, or can be downloaded at: NOTE: For additional license options please see the Insight Control at: BD507A T9082AAE B21 High Performance Clusters HP Cluster Management Utility HP Insight Cluster Management Utility 1yr 24x7 Flexible License NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. QL803B c DA NorthAmerica Version 29 November 1, 2014 Page 23

24 Additional Options HP Insight Cluster Management Utility 3yr 24x7 Flexible License NOTE: These part numbers can be used to purchase one certificate for multiple licenses and support with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. Customer also will receive a support agreement. HP Insight Cluster Management Utility Media NOTE: For additional license kits please see the at: HP HPC Linux Value Pack HP High Performance Computing Linux Value Pack 1 Processor Flexible License for ProLiant Servers NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one socket (a.k.a. processor). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. HP High Performance Computing Linux Value Pack Media Kit for ProLiant Servers NOTE: This part number can be used to purchase media including software and documentation, which will be delivered to the customer. NOTE: For additional license kits please see the at: GPU Computing Modules NOTE: The Tesla modules can only be accommodated in SL390s 2U or 4U trays. NOTE: When only one Tesla module is to be configured in a 2U tray, a GPU Riser Kit (single GPU or 2 GPU) must be ordered. NOTE: When two Tesla modules are to be configured in a 2U tray, either order one 2 GPU Riser kit, or order one single GPU Riser Kit plus a 2 GPU Riser Kit. In the second case, one Tesla module would be placed in each of the two Riser Kits, resulting in increased total GPU bandwidth. NOTE: When three Tesla modules (the maximum allowed) are to be configured in a 2U tray, order one single GPU Riser Kit plus a 2 GPU Riser Kit. NOTE: Power supplies must be configured to accommodate the power requirements of the Tesla modules. For example, the M2075 modules each have a peak power requirement of 225 watts. NOTE: The ambient temperature for SL390s 2U systems with between one and three NVIDIA M2090 GPUs, must be 30 degrees Celsius or less. The ambient temperature for SL390s 4U systems with between five and eight NVIDIA M2090 GPUs, must be 30 degrees Celsius or less. All other SL390s systems may be operated with ambient temperatures up to 35 degrees Celsius. NOTE: When adding GPU solutions to the SL390 2U & 4U servers one must utilize the HP 1200W CS Platinum Power Supply Kit, B21, for all four power supply slots. NVIDIA Tesla M2070 6GB Module NVIDIA Tesla M2070Q 6GB GPU Graphics Module NVIDIA Tesla M2090 6GB Module NVIDIA Tesla M2075 6GB Computational Module NOTE: For additional license kits please see the at: BD476A BD477A TC293B TC294A SH886A A0C39A A0J99A A0R41A HP Storage Controllers SAS Controllers c DA NorthAmerica Version 29 November 1, 2014 Page 24

25 Additional Options Smart Array P212 Controller HP Smart Array P212/ZM 1-ports Int/1-ports Ext PCIe x8 SAS Controller B21 HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 SAS Controller B21 Smart Array P410 Controller HP Smart Array P410/256 2-ports Int PCIe x8 SAS Controller B21 HP Smart Array P410/512 BBWC 2-ports Int PCIe x8 SAS Controller B21 HP Smart Array P410/512 FBWC 2-ports Int PCIe x8 SAS Controller B21 HP Smart Array P410/1G FBWC 2-ports Int PCIe x8 SAS Controller B21 Smart Array P411 Controller HP Smart Array P411/256 2-ports Ext PCIe x8 SAS Controller B21 HP Smart Array P411/512 BBWC 2-ports Ext PCIe x8 SAS Controller B21 HP Smart Array P411/512 FBWC 2-ports Ext PCIe x8 SAS Controller B21 HP Smart Array P411/1G FBWC 2-ports Ext PCIe x8 SAS Controller B21 Optional Upgrades HP 256MB P-series Cache Upgrade B21 HP 512MB P-Series Battery Backed Write Cache Upgrade B21 HP 1GB Flash Backed Cache B21 HP 512MB Flash Backed Write Cache B21 HP 650 mah P-Series Battery NOTE: HP z6000 BBWC HDWR KIT ( B21) is required when adding BBWC NOTE: To enable BBWC on the 256MB cache B21 HP z6000 P212 SAS 4 Hard Drive Power Cable Kit B21 HP z6000 Battery Back Write Cache Hardware Kit B21 HP 2x170 P212 SAS 2 Hard Drive Power Cable Kit B21 HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates Single Server License NOTE: This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via . The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HP Software Technical Support Services. NOTE: Please see the for Technical Specifications and additional information: (Smart Array P212 Controller) (Smart Array P410 Controller) (Smart Array P411 Controller) (Smart Array Advanced Pack) SCSI HBA HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter NOTE: Recommended HBA for SCSI tape drive connect. NOTE: Please see the for additional information: (SC11Xe HBA) B B21 HP Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media see: c DA NorthAmerica Version 29 November 1, 2014 Page 25

26 Additional Options For hardware and software compatibility of HP tape backup products see: HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit HP StoreEver LTO-6 Ultrium 6650 Internal Tape Drive HP StoreEver LTO-6 Ultrium 6650 External Tape Drive HP StoreEver LTO-6 Ultrium 6250 Internal Tape Drive HP StoreEver LTO-6 Ultrium 6250 External Tape Drive C0L99A EH963A EH964A EH969A EH970A HP Storage Options Storage Fibre Channel HBA NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: Brocade Fibre Channel HBAs HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter HP 41B 4Gb 1-port PCIe Fibre Channel Host Bus Adapter HP 42B 4Gb 2-port PCIe Fibre Channel Host Bus Adapter Emulex Fibre Channel HBAs HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter HP FC2142SR 4Gb 1-port PCIe Fibre Channel Host Bus Adapter HP FC2242SR 4Gb 2-port PCIe Fibre Channel Host Bus Adapter HP SN1000E 16Gb 2-port PCIe Fibre Channel Host Bus Adapter HP SN1000E 16Gb 1-port PCIe Fibre Channel Host Bus Adapter QLogic Fibre Channel HBAs HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter HP FC1142SR 4Gb 1-port PCIe Fibre Channel Host Bus Adapter HP FC1242SR 4Gb 2-port PCIe Fibre Channel Host Bus Adapter Converged Network Adapter HP CN1100E Dual Port Converged Network Adapter HP CN1000E Dual Port Converged Network Adapter AP769B AP770B AP767B AP768B AJ762A AJ763A A8002A A8003A QR559A QR558A AK344A AJ764A AE311A AE312A BK835A AW520B HP Uninterruptible Power Systems HP Rack-mountable UPS HP R1500 G3 Uninterruptible Power Supply (UPS) HP R1.5kVA G3 1U INTL Uninterruptible Power System HP R1.5kVA G3 1U JP/TW Uninterruptible Power System HP R1.5kVA G3 1U NA Uninterruptible Power System NOTE: Please see the for additional information: (Worldwide) HP R/T3000 G2 Uninterruptible Power System (UPS) HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System NOTE: Please see the for additional information: AF471A AF470A AF469A AF468A AF466A AF467A c DA NorthAmerica Version 29 November 1, 2014 Page 26

27 Additional Options (Worldwide) R5000 Uninterruptible Power System (UPS) HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System NOTE: Please see the for additional information: (Worldwide) R7000 Uninterruptible Power System (UPS) HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System NOTE: Please see the for additional information: (Worldwide) NOTE: For additional information on sizing your HP UPS, please reference: NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: NOTE: For additional information on HP Uninterruptible Power Systems please go to: AF461A AF460A AF462A AF463A HP Power Distribution Units HP Monitored Power Distribution Unit: Full Rack Version HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution Unit HP 8.3kVA 40A Single Input Single Phase NA/JP Monitored Power Distribution Unit HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution Unit HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit HP Monitored Power Distribution Unit: Half Rack Version HP 4.9kVA 24A Single Input Single Phase NA/JP Monitored Power Distribution Unit HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit NOTE: Please see the following for additional information: (Worldwide) Modular PDUs 1U/0U NOTE: 1U/0U mounting brackets shipped with the unit (optimized for G2 and 9000 series racks). AF504A AF506A AF508A AF510A AF914A AF915A HP 3.6kVA 16A High Voltage INTL Modular Power Distribution Unit B24 HP 4.9kVA 24A High Voltage NA/JP Modular Power Distribution Unit D72 HP 2.8kVA 24A Low Voltage NA/JP Modular Power Distribution Unit D71 HP 7.3kVA 32A High Voltage INTL Modular Power Distribution Unit B31 NOTE: For additional information on HP Power Distribution Units including accessories please go to: NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific power requirements. c DA NorthAmerica Version 29 November 1, 2014 Page 27

28 Additional Options NOTE: Please see the following for additional options including shorter jumper cables and country specific power cords: (Worldwide) HP Intelligent Power Distribution Units (ipdu) ipdu Core Units HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit ipdu Extension Bars HP 5xC13 Intelligent PDU Extension Bar G2 Kit HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar NOTE: Please see the for Technical Specifications and additional information: (Worldwide) AF520A AF522A AF525A AF526A AF547A AF528A HP Rack Options HP USB Keyboard and Mouse HP USB BFR with PVC Free US Keyboard/Mouse Kit B21 HP USB BFR with PVC Free UK Keyboard/Mouse Kit B21 HP USB BFR with PVC Free FR Keyboard/Mouse Kit B21 HP USB BFR with PVC Free ES Keyboard/Mouse Kit B21 HP USB BFR with PVC Free DE Keyboard/Mouse Kit B21 HP USB BFR with PVC Free JP Keyboard/Mouse Kit B21 HP USB BFR with PVC Free IT Keyboard/Mouse Kit B21 HP USB BFR with PVC Free CN Keyboard/Mouse Kit B21 HP USB BFR with PVC Free AE Keyboard/Mouse Kit B21 HP USB BFR with PVC Free RU Keyboard/Mouse Kit B21 HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit HP USB BFR with PVC Free Intl Keyboard/Mouse Kit B33 HP USB BFR with PVC Free PT Keyboard/Mouse Kit HP USB BFR with PVC Free TR Keyboard/Mouse Kit HP USB BFR with PVC Free CZ Keyboard/Mouse Kit HP USB BFR with PVC Free FI Keyboard/Mouse Kit HP USB BFR with PVC Free SE Keyboard/Mouse Kit HP USB BFR with PVC Free CH Keyboard/Mouse Kit HP USB BFR with PVC Free KR Keyboard/Mouse Kit KD3 HP USB BFR with PVC Free IN Keyboard/Mouse Kit D63 NOTE: Please see the for Technical Specifications and additional information: (Worldwide) HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor AZ870A AZ871A AZ872A c DA NorthAmerica Version 29 November 1, 2014 Page 28

29 Additional Options HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor AZ873A AZ874A AZ875A AZ876A AZ877A AZ878A AZ879A AZ880A AZ881A HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor NOTE: Please see the for Technical Specifications and additional information: (Worldwide) HP Server Console Switches HP Server Console 0x2x8 Port Analog Switch HP Server Console 0x2x16 Port Analog Switch HP TAA 0x2x16xKVM Server Console G2 Switch NOTE: Please see the for Technical Specifications and additional information: (Worldwide) HP Server Console Switch G2 with Virtual Media & CAC HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software AZ882A AZ883A AZ884A AZ885A AF616A AF617A AF626A AF618A AF619A HP KVM CAT5 1-pack USB Interface Adapter B21 NOTE: Please see the for Technical Specifications and additional information: (Worldwide) HP IP Console Switch G2 with Virtual Media & CAC HP 1x4 USB/PS2 KVM Console Switch HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software NOTE: Please see the for Technical Specifications and additional information: (Worldwide) AF611A AF620A AF621A AF622A HP USB and SD Options HP USB 2-Button Optical Scroll Mouse DC172B HP USB 04 Standard Keyboard DT528A#ABA HP 4GB Micro SDHC Flash Media Kit B21 c DA NorthAmerica Version 29 November 1, 2014 Page 29

30 Additional Options HP Care Pack Services HP 3 year Next business day ProLiant s6500 Hardware Support UR398E HP 3 year Next business day with Defective Media Retention ProLiant s6500 Hardware Support HP 3 year 4 hour 13x5 ProLiant s6500 Hardware Support HP 3 year 4 hour 13x5 with Defective Media Retention ProLiant s6500 Hardware Support HP 3 year 4 hour 24x7 ProLiant s6500 Hardware Support HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant s6500 Hardware Support HP 3 year 6 hour 24x7 Call to Repair ProLiant s6500 Hardware Support HP 3 year 6 hour 24x7 Call to Repair with Defective Media Retention s6500 Hardware Support HP 3 year 4 hour 24x7 ProLiant s6500 Collaborative Support HP 3 year 4 hour 24x7 ProLiant s6500 Proactive Care Service HP 3 year Next business day ProLiant s6500 Collaborative Support HP 3 year Next business day ProLiant s6500 Proactive Care Service HP 4 year Next business day ProLiant s6500 Hardware Support HP 4 year Next business day with Defective Media Retention ProLiant s6500 Hardware Support HP 4 year 4 hour 13x5 ProLiant s6500 Hardware Support HP 4 year 4 hour 13x5 with Defective Media Retention ProLiant s6500 Hardware Support HP 4 year 4hour 24x7 ProLiant s6500 Hardware Support HP 4 year 4 hour 24x7 with Defective Media Retention ProLiant s6500 Hardware Support HP 4 year 6 hour 24x7 Call to Repair ProLiant s6500 Hardware Support HP 4 year 6 hour Call to Repair 24x7 with Defective Media Retention ProLiant s6500 Hardware Support HP 5 year Next business day ProLiant s6500 Hardware Support HP 5 year Next business day with Defective Media Retention ProLiant s6500 Hardware Support HP 5 year 4 hour 13x5 ProLiant s6500 Hardware Support HP 5 year 4 hour 13x5 with Defective Media Retention ProLiant s6500 Hardware Support HP 5 year 4 hour 24x7 ProLiant s6500 Hardware Support HP 5 year 4 hour 24x7 with Defective Media Retention ProLiant s6500 Hardware Support HP 5 year 6 hour 24x7 Call to Repair ProLiant s6500 Hardware Support HP 5 year 6 hour 24x7 Call to Repair with Defective Media Retention s6500 Hardware Support HP 3 year 24x7 24 hour Call to Repair ProLiant s6500 Hardware Support HP 3 year 24x7 24 hour Call to Repair with Defective Media Retention ProLiant s6500 Hardware Support HP 4 year 24x7 24 hour Call to Repair ProLiant s6500 Hardware Support HP 4 year 24x7 24 hour Call to Repair with Defective Media Retention ProLiant s6500 Hardware Support HP 5 year 24x7 24 hour Call to Repair ProLiant s6500 Hardware Support UR399E UR400E UR401E UR402E UR403E UR404E UR405E U1M52E U3C72E U1M46E U3C66E UR406E UR407E UR408E UR409E UR410E UR411E UR412E UR413E UR414E UR415E UR416E UR417E UR418E UR419E UR420E UR421E UR425E UR426E UR427E UR428E UR429E c DA NorthAmerica Version 29 November 1, 2014 Page 30

31 Additional Options HP 5 year 24x7 24 hour Call to Repair with Defective Media Retention ProLiant s6500 Hardware Support NOTE: For more information, customer/resellers can contact: UR430E c DA NorthAmerica Version 29 November 1, 2014 Page 31

32 Memory HP ProLiant SL390s G7 Server NOTE: Memory configurations listed do not apply to "Factory Integrated Models". NOTE: Chart does not represent all possible memory configurations. DDR3 memory population guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: Some DIMM installation guidelines are summarized below: For servers with Twelve (12) memory slots There are three (3) channels per processor; six (6) channels per server There are two (2) DIMM slots per memory channel; (12) total slots DIMM slots that are white should be populated first Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs) Do not install DIMMs if the corresponding processor is not installed If only one processor is installed in a 2CPU system, only half of the DIMM slots are available To maximize performance, balance the total memory capacity between all installed processors It is not required, but it is recommended to load the channels similarly if possible You can only have up to eight (8) ranks installed per channel You can only install two quad-rank DIMMs per channel You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of supporting 1.5V operations DIMM slot/capacity/populated speed table DIMM Type Registered DIMMS (RDIMMs) Unbuffered with ECC DIMMs (UDIMMs) DIMM Rank Single Rank (1R) Dual Rank (2R) Quad Rank (4R) Single Rank (1R) Dual Rank (2R) DIMM Capacity 4GB 2GB 4GB 8GB 8GB 16GB 4GB 16GB 32GB 1GB 2GB 4GB DIMM Native Speed (MHz) SLOTS THAT CAN BE POPULATED 12 slot servers MAXIMUM CAPACITY (GB) POPULATED DIMM SPEED (MHz) 1 DIMM Per Channel / 1333* 1333* 1333* * 2 DIMM Per Channel 1333** * * at 1333 via setting in ROM based setup utility (RBSU) c DA NorthAmerica Version 29 November 1, 2014 Page 32

33 Memory **2DPC: LV runs at 1066, Std voltage runs at 1333 NOTES: PC DIMMs have a maximum speed of 1333MHz. PC DIMMs have a maximum speed of 1066MHz Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower DIMM is on the other processor If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, the maximum speed will be 1066MHz Maximum memory speed will also depend on the processor installed References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc. DIMM slot and configuration diagrams Basic memory slot & population diagram Population order; start with "A" first, "B" second, "C" third, etc. 12 DIMM SLOTS (8 per CPU node) CPU1 CPU2 slot # population order slot # population order Chnl 1 1 A 1 A Chnl 1 2 D 2 D Chnl 2 3 B 3 B Chnl 2 4 E 4 E Chnl 3 5 C 5 C Chnl 3 6 F 6 F Standard memory configuration (1 CPU model) 6GB, consisting of three (3) 2GB dual-rank PC E UDIMMs CPU1 CPU2 slot # population order slot # population order Chnl 1 1 A; 2GB DIMM 1 A; empty Chnl 1 2 D; empty 2 D; empty Chnl 2 3 B; 2GB DIMM 3 B; empty Chnl 2 4 E; empty 4 E; empty Chnl 3 5 C; 2GB DIMM 5 C; empty Chnl 3 6 F; empty 6 F; empty c DA NorthAmerica Version 29 November 1, 2014 Page 33

34 Memory Standard memory plus optional memory (1 CPU model) 12GB, consisting of three (3) 2GB UDIMMs plus three (3) 2GB UDIMMs o 6x 2GB dual-rank PC E UDIMMs CPU1 CPU2 slot # population order slot # population order Chnl 1 1 A; 2GB DIMM 1 A; empty Chnl 1 2 D; 2GB DIMM 2 D; empty Chnl 2 3 B; 2GB DIMM 3 B; empty Chnl 2 4 E; 2GB DIMM 4 E; empty Chnl 3 5 C; 2GB DIMM 5 C; empty Chnl 3 6 F; 2GB DIMM 6 F; empty Standard memory replaced with optional memory (1 CPU model) RDIMM maximum configuration 96GB, consisting of eight (8) 16GB dual-rank PC RDIMMs CPU1 CPU2 slot # population order slot # population order Chnl 1 1 A; 16GB DIMM 1 A; empty Chnl 1 2 D; 16GB DIMM 2 D; empty Chnl 2 3 B; 16GB DIMM 3 B; empty Chnl 2 4 E; 16GB DIMM 4 E; empty Chnl 3 5 C; 16GB DIMM 5 C; empty Chnl 3 6 F; 16GB DIMM 6 F; empty Standard memory replaced with optional memory (2 CPU model) RDIMM maximum configuration 384GB, consisting of twelve (12) 32GB PC RDIMMs CPU1 CPU2 slot # population order slot # population order Chnl 1 1 A; 32GB DIMM 1 A; 32GB DIMM Chnl 1 2 D; 32GB DIMM 2 D; 32GB DIMM Chnl 2 3 B; 32GB DIMM 3 B; 32GB DIMM Chnl 2 4 E; 32GB DIMM 4 E; 32GB DIMM Chnl 3 5 C; 32GB DIMM 5 C; 32GB DIMM Chnl 3 6 F; 32GB DIMM 6 F; 32GB DIMM c DA NorthAmerica Version 29 November 1, 2014 Page 34

35 Memory UDIMM maximum configuration 48GB, consisting of twelve (12) 4GB dual-rank PC UDIMMs CPU1 CPU2 slot # population order slot # population order Chnl 1 1 A; 4GB DIMM 1 A; 4GB DIMM Chnl 1 2 D; 4GB DIMM 2 D; 4GB DIMM Chnl 2 3 B; 4GB DIMM 3 B; 4GB DIMM Chnl 2 4 E; 4GB DIMM 4 E; 4GB DIMM Chnl 3 5 C; 4GB DIMM 5 C; 4GB DIMM Chnl 3 6 F; 4GB DIMM 6 F; 4GB DIMM NOTE: Capacity references are rounded to the common Gigabyte values. 1GB = 1024MB 2GB = 2048MB 4GB = 4096MB 8GB = 8192MB 16GB = 16384MB 32GB = 32768MB DDR3 memory options part number decoder Following are memory options available from HP: HP Memory Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC (DDR3-1333) Registered CAS-9 Memory Kit B21 HP 4GB (1x4GB) Dual Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit B21 HP 4GB (1x4GB) Single Rank x4 PC (DDR3-1333) Registered CAS-9 Memory B21 Kit HP 4GB (1x4GB) Single Rank x4 PC3L (DDR3-1333) Registered CAS-9 Low B21 Power Memory Kit c DA NorthAmerica Version 29 November 1, 2014 Page 35

36 Memory NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors. HP 16GB (1x16GB) Quad Rank x4 PC (DDR3-1066) Registered CAS-7 Memory B21 Kit HP 8GB (1x8GB) Dual Rank x4 PC (DDR3-1333) Registered CAS-9 Memory Kit B21 HP 8GB (1x8GB) Dual Rank x4 PC3L (DDR3-1333) Registered CAS-9 Low B21 Power Memory Kit HP 16GB (1x16GB) Dual Rank x4 PC3L (DDR3-1333) Registered CAS-9 LP B21 Memory Kit HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP B21 Memory Kit NOTE: Low Voltage DIMMs can only be used with Intel Xeon processor 5600 series processors. Unbuffered with ECC DIMMs (UDIMMs) HP 1GB (1x1GB) Single Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory B21 Kit HP 2GB (1x2GB) Dual Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory B21 Kit HP 4GB (1x4GB) Dual Rank x8 PC (DDR3-1333) Unbuffered CAS-9 Memory B21 Kit HP 4GB (1x4GB) Dual Rank x8 PC3L (DDR3-1333) Unbuffered CAS-9 Low B21 Power Memory Kit NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: NOTE: There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel) NOTE: PC3L is a low voltage memory. NOTE: Memory Min and Max depends on number of processors and type of memory: 1. Processor -> R-Dimm: Min 1 // Max 6 U-Dimm: Min 1 // Max Processors -> R-Dimm: Min 2 // Max 6 U-Dimm: Min 2 // Max 12 c DA NorthAmerica Version 29 November 1, 2014 Page 36

37 Storage 4U Tray 1-8 Up to eight 2.5" hot plug hard drive bays 2U Tray 1-4 Up to four 2.5" hot plug hard drive bays 5-6 Up to two 2.5" hard drives use quick release carrier 1U Tray 1-2 Up to two 3.5" hard drives use quick release carrier c DA NorthAmerica Version 29 November 1, 2014 Page 37