Camera Shoulder Mount Kit 201. (C-Kit-201)

Transcription

1 Camera Shoulder Mount Kit 201 (C-Kit-201) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

2 CAMTREE Shoulder Kit I N T R O D U C T I O N Customer demand for support equipment to match today s sophisticated and smaller DSLR s continues to grow as the technology for image capture evolves along with the intended use. Smaller, lighter, faster, more flexible, applies not only to modern cameras, these terms can also be used to describe the support equipment that enhances a shooters craft. Our CAMTREE Shoulder Kit-201 is a prime example of that support. I N T H E B OX Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below. The grey foam shipping /storage container has been especially designed to protect your purchase while in transit and is a good place to keep your CAMTREE Shoulder Kit 201 when not in use. 9 X 300mm Female threaded rods Camera /Tripod Mount Quick Release 2 X 150mm Male threaded rods 9" Camera Cage Counter Weight Top Handle Telescopic handle Shoulder Pad Straight Bracket Mic Suspension Accessories 15mm Adapter Junction Rod Adapter Camshade Matte Box X5 Follow Focus 6pc Gear Ring Set Speed Crank

3 CAMTREE Shoulder Kit A S S E M B LIN G YO U R C A M S H A D E M AT T E B OX Insert the french flag in to the matte box and tighten the screws. Using the same approach, insert the side flags into the (big) slots provided in the hinges and secure with the screws. Insert the filter holders as shown in the image. Note: For better gripping of the filter in the filter holder, retighten the filter tray knob to secure the filter properly. Fit one side (the broad side) of the knicker into the back clamp of the knicker ring. The knicker can be easily loosened or tightened by pressing the clip provided. The fabric can be stretched over your lens to completely prevent light leaks.

4 CAMTREE Shoulder Kit A SSE MB LING YOUR SH O U LDE R KI T 201 Attach the quick release plate of your tripod head with base plate & mount the base plate on fluid head and secure it properly. Now insert the rods into 15mm rod adapter and tighten the knob to secure properly. Attach the camera with camera plate and tighten the screw with the help of screw driver. Now slide the setup onto tripod stand & the tighten the knob to secure it properly.

5 CAMTREE Shoulder Kit Insert the 300mm long rods into the front and back 15mm slots on the cage bracket & Secure Properly. Then insert the set of 300mm rods into the top rod holder of cage. Then attach the top handle on the front bracket of cage and secure properly. Now insert 300mm rods into cage brackets while inserting you can add 15mm adapter in the middle to attach other accessories.

6 CAMTREE Shoulder Kit Attach the straight bracket to the back side of rods, then insert 300mm rods into it and tighten with provided knob to secure properly. Insert the shoulder pad & counter weight to the rods, tighten the knob to secure properly. Now screw-in the 150mm male rods into the front of 300mm female rods. AT TA C H I N G T H E F O L LO W F O C U S

7 CAMTREE Shoulder Kit Attach gear ring to camera lens and tighten properly. Insert X5 follow focus to front of rods and secure it properly with the help of provided knob. Now attach the matte box to the front of rods, align the knicker with the lense barrel and tighten the knot. Attach the junction rod adapters and slide-in the rod through it in order to attach the handles & tighten the knobs to secure properly.

8 CAMTREE Shoulder Kit Attach the handles at both sides and tighten the knobs to secure properly. C A M T R E E S H O U L D E R K I T S E T U P I S R E A DY TO U S E WARRANTY Exclusive of Camera, Head, Mic and Tripod Stand We offer a limited time warranty for our products. For Mechanical products we provide a 6 month warranty & for electronic products we provide a 3 month warranty from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us. If any VAT or import duties are applied to the return, we will also charge these costs to the customer. The warranty does not include, by the way of example, damage caused by products that we do

9 CAMTREE Shoulder Kit not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. We are not liable for incidental or consequential damages resulting from the use of the unit or occurring due to any breach of this warranty. Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers after the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. After that, Nominal cost of the product & Actual shipping cost will be charged. Do not send the unit to us without first getting a response and getting the approval to send back the item. In case of any kind of dissatisfaction, we urge you to Contact us immediately and we shall do our best to help you out. For any other assistance you can reach us via .