Conductive Sensors 2 to 4-point level controller Type CL with teach-in
|
|
- Doris Dickerson
- 5 years ago
- Views:
Transcription
1 Conductive Sensors to -point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying applications w-voltage AC electrodes Easy installation on DIN rails or with pin circular plug Rated operational voltage: VAC/DC, VAC or 0 VAC Output x8a/0 VAC SPDT relay LED indication for: Calibration, faulty operation and relay status Product Description µ-processor based level controller for liquids with a wide sensitivity range (like sewage water, chemicals, salt water etc.). The controller has a separate output for alarm Type Selection indication in case of a tank running dry or if an overflow condition occurs. 8A SPDT/SPST relay output, NO/NC. Ordering Key Type DIN rail mounting Inputs Function Adjustment Outputs Relay versions CLDMTDM Mounting Relay Ordering no. Ordering no. Ordering no. Supply: VAC/DC Supply: VAC Supply: 0 VAC DIN-rail SPDT + SPST CLDMTDM CLDMTD CLDMTD0 -p circular plug SPST CLPMTAM CLPMTA CLPMTA0 Specifications Rated operational voltage (U B) Pin & to VAC, to Hz 98 to VAC, to Hz 9 9. to 8.8 VAC/DC Rated insulation voltage <.0 kvac (rms) Rated impulse withstand voltage kv (./0 µs) (line/neutral) Rated operational power AC supply VA AC/DC supply VA / W Delay on operate (t V) < 00 ms Outputs Make or break on DIP-switch Rated insulation voltage 0 VAC (rms) (cont./elec.) Relay Rating (AgCdO) µ (micro gap) Resistive loads AC 8 A / 0 VAC (00 VA) DC A / 0 VDC (0 W) or 0 A VDC (0 W) Small induc. ads AC 0, A / 0 VAC DC 0, A / 0 VDC Mechanical life (typical) 0 x imp/h Electrical life (typical) AC > operations Level probe supply Max. VAC Level probe current Max.. ma Sensitivity 0Ω to 0KΩ Dielectric voltage >.0 KVAC (rms) (contacts / electronics) Rated impulse withstand volt. kv (./0 µs) (contacts / electronics) (IEC ) Operating frequency (f) Relay output HZ Response time OFF-ON (t ON) ms 0. 0 s ON-OFF (t OFF) ms 0. 0 s Environment Overvoltage category III (IEC 0) Degree of protection IP 0 /IEC 09, 097-) Pollution degree (IEC 0/0A, 097-) Temperature Operating -0º to +0ºC (-º to + º) Storage -0º to +8ºC (-8º to +8ºF) Housing material NORYL SE, light grey Weight AC supply 00 g AC/DC supply g Approvals UL08, CSA CE marking Yes Specifications are subject to change without notice (.0.0) Gross Automation (877) sales@grossautomation.com
2 Mode of Operation Connection cable,, or conductor PVC cable, normally screened. Cable length: max. 00 m. The resistance between the cores and the ground must be at least 0k. Normally, it is recommended to use a screened cable between probe and controller, e.g. where the cable is placed in parallel to the load cables (mains). The screen has to be connected to Y (reference). DIP-switch setting Select the needed function on the DIP-switches, so that the desirable application occurs. Press the pushbutton in front of the controller shortly, until the green LED flashes once. The DIPswitch setting will now be read by the controller. Teach-in: Make sure that the reference electrode and one of the other electrodes are in contact with the liquid approximately cm. Press the teach pushbutton at the front of the controller for approximately seconds, until the green LED turns OFF. The controller will now auto-adjust itself according to the resistance of the measuring liquid. If the resistance of the liquid is outside the maximum range handled by the controller, the green LED will flash quickly for a period of seconds, indicating a wrong teach-in. Filter The signal delay is selectable from second or seconds, and works for the on/off switching of the output relays. Example The diagram shows the level control connected as max. and min. control, i.e. registration of levels + alarm levels. The relays react to the low alternating current created when the electrodes are in contact with the liquid. The reference (Ref) must be connected to the container or if the container consists of a non-conductive material, Example (Din-rail) Pump on/off A Y Y Y Y Y Alarm on/off A to an additional electrode. (To be connected to pin Y). In the diagram this electrode is shown by the dotted line.) The alarm outputs utilize electrodes on Y for alarm and Y for alarm. Function: Charge or Discharge used as a minimum-maximum control for up to two individual systems, with the same kind of liquid to be measured. Function selection Function selection Relay - Charge (off) or Discharge (on) Relay - Charge (off) or Discharge (on) X-ERENCE Y 8 Y A A 0-9 Charging or discharging A Y Y Y Y Y A Charging or discharging Charging LO electrode in liquid HI electrode in liquid Relay on pumping contact (make) Discharging HI electrode in liquid LO electrode in liquid Relay on pumping contact (make) Specifications are subject to change without notice (.0.0) Gross Automation (877) sales@grossautomation.com
3 Operation Diagram Function: Charge and Discharge used as a minimum-maximum control for two systems, a charging system and a discharging system, with the same kind of liquid to be measured and one common pump. Function selection Function selection No function No function X-ERENCE Y 8 Y A A 0-9 Relay Pump A contactor coil Y Y Y Y Y Not in use A Charging Discharging Charging and discharging LO electrode in liquid tank HI electrode in liquid tank LO electrode in liquid tank HI electrode in liquid tank Relay on pumping contact Function: Charge or Discharge with high and low alarms used as a minimum-maximum control charging or discharging system, with and Alarm output. Function selection Function selection Relay - Charge (off) or Discharge (on) Relay - Alarm X-ERENCE Y 8 Y A A 0-9 Pump on/off A Y Y Y Y Y Alarm on/off A Charging LO electrode in liquid HI electrode in liquid LOLO electrode in liquid HIHI electrode in liquid Relay on pumping contact Relay on alarm contact Specifications are subject to change without notice (.0.0) Gross Automation (877) sales@grossautomation.com
4 Operation Diagram Function: Charge or discharge with low alarm used as a minimum-maximum control charging or discharging system, with one alarm output. Function selection Function selection Relay - w alarm Relay - Charge (off) or Discharge (on) X-ERENCE Y 8 Y A A 0-9 Y Y Y Y Y alarm on/off Pump on/off A A Function: Charge or discharge with high alarm used as a minimum-maximum control charging or discharging system, with one alarm output. Function selection Function selection Relay - Charge (off) or Discharge (on) Relay - gh alarm X-ERENCE Y 8 Y A A 0-9 Pump on/off Y Y Y Y Y alarm on/off A A Function: Direct input- output used as direct input/ output, where each of the two inputs (electrodes) controls an individual relay output: Electrode no. = Relay no. Electrode no. = Relay no.. Function selection Function selection No function No function Charging and discharging X-ERENCE Y 8 Y A A 0-9 Ref Y Y Y Relay Relay A A LO electrode in liquid tank HI electrode in liquid tank Relay Relay Specifications are subject to change without notice (.0.0) Gross Automation (877) sales@grossautomation.com
5 Operating Schedule The following schedule provides an overview of the setup and failure situations Situation Condition Action Green Control lamp Read DIP-switch setting The DIP-switch setting has to match one of the descriptions written in mode of operation Press the Teach-button in front of the controller shortly until the green control lamp turns off. Release the teach button immediately Teach button Green lamp Teach-in Fill the tank with the liquid to be measured until the second longest electrode is immersed approx. cm Press the Teach button in front of the controller for approx. seconds until the green control lamp turn off continuously. Release the teach button Teach button Green lamp Failure indication The Green lamp is flashing fast for approx seconds after a teach-in operation Control the electrode for short-cut connections. Control that the resistance of the measured liquid is within the specified range Teach button Green lamp Wiring Diagram Din-rail version Plug version - - Y Y Y Y Y A A Ref (PE) Ref (PE) Specifications are subject to change without notice (.0.0) Gross Automation (877) sales@grossautomation.com
6 Dip Switch Settings Din-rail version Charge or Discharge + Alarm (Relay ) Charge and Discharge in out Charge or Discharge Relay - Charge (Y & Y) Relay - Discharge (Y & Y) Relay - Charge (Y & Y) Relay - Discharge (Y & Y) Relay + not inverted Relay + Inverted Filter off Filter on Plug version Charge or Discharge + Alarm (Relay ) Charge and Discharge in out Charge or Discharge Relay - Charge (8 & ) Relay - Discharge (8 & ) Relay - Charge ( & ) Relay - Discharge ( & ) Relay + not inverted Relay + Inverted Filter off Filter on Dimension Drawings Din-rail version Plug version, 0, 8,, Accessories pole corcular socket Socket cover for S Socket cover for S Mounting rack S, SA, S, ZPD BB BB SM Delivery Contents Amplifier Packaging: Carton box Manual Specifications are subject to change without notice (.0.0) Gross Automation (877) sales@grossautomation.com
Conductive Sensors 2 to 4-point level controller Type CL with teach-in
Conductive Sensors to 4-point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying
More information24 V DC typ. 0,65 W. Liquid level with conductive probes (type SK1, SK5) Resistance measurement E1-E0, E2-E0, E3-E0, E4-E0
monitoring in conductive liquids 4 probe inputs for level monitoring Multifunction Adjustable sensor voltage Supply voltage 24-240V AC/DC Protective separation of measuring circuit 3 normally open contacts
More informationData sheet ACT20P ACT20P-CMT-10-AO-RC-S. Phone: Fax: Web: - [!
-CMT-10-AO-RC-S [!-] General ordering data Type -CMT-10-AO-RC-S Order No. 1510470000 Version Current-measuring transducer GTIN (EAN) 4050118319583 Qty. 1 pc(s). -CMT-10-AO-RC-S Technical data Dimensions
More informationSlim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
More information02/11/2015
35 mm - 1 Relay 8A OUR1 Part number 88867105 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More information61F-GP-N8D. Model Number Structure. Ordering Information. Conductive Level Controller. Model Number Legend. List of Models
Conductive Level Controller 61F-GP-N8 Compact Plug-in Level for Single or Two-point Level Control of Conductive Materials (Liquids and Solids) Wide range of models: long-distance, high and low-sensitivity,
More informationRM35LM33MW liquid level control relay RM35-L V AC/DC
Characteristics liquid level control relay RM35-L - 24..240 V AC/DC Complementary Reset time Maximum switching voltage [Un] rated nominal voltage Supply voltage limits Operating voltage tolerance Power
More informationClassification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
More informationPhotoelectrics Retro-reflective, Industrial Door Market Type PD86.AP12, Polarized, Relay Output, Mute Input
Photoelectrics Retro-reflective, Industrial Door Market Type PD86.AP12, Polarized, Relay Output, Mute Input Range: 12 m @ ER 4 (15 m @ ER100) Adjustable lenses ±4.5º Modulated, visible light, polarized
More information02/11/2015
DIN Rail Mount 35 mm HSV Part number 84874320 Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - 3-wire PNP or NPN, Namur, voltage 0-30V or volt-free contact
More informationSyr-line TMR48D Digital Timer
yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05s-9999h) Multi-voltage (24-240V
More informationRM35LM33MW liquid level control relay RM35-L V AC/DC
Characteristics liquid level control relay RM35-L - 24..240 V AC/DC Complementary reset time maximum switching voltage Main range of product product or component type relay type relay name relay monitored
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More information4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
More informationVariTrans A The specialist for ±10 V and ±20 ma. With calibrated range selection and broad-range power supply.
Universal Isolation Amplifiers The specialist for ±10 V and ±20 ma. With calibrated range selection and broad-range power supply. The Housing At a width of just 12.5 mm, the modular housing with pluggable
More informationRE22R2QTMR Star-Delta Timing Relay s 300h V AC/DC - 2C/O
Characteristics StarDelta Timing Relay 0.05s 300h 24 240V AC/DC 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Zelio Time Modular timing
More informationRM22LA32MR Level control relay RM22-L V AC/DC - 2 C/O
Product datasheet Characteristics RM22LA32MR Level control relay RM22-L - 24..240 V AC/DC - 2 C/O Main Range of product Product or component type Relay type Relay name Relay monitored parameters Time delay
More informationRE17LAMW on-delay timing relay - 1 s..100 h V AC/DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/DC - solid state output Complementary Control type Voltage range Main Range of product Product or component type Discrete output type Width
More informationConductive Level Controller
Conductive Level Compact Plug-in Level s for Single or Two-point Level Control of Conductive Materials (Liquids and Solids) Wide range of models: long-distance, high and low-sensitivity, and two-wired
More informationRCMB20/RCMB Series
4 T M /-500 Series Integratable Ground Fault Monitoring Modules For Integration Into Frequency Converters and Combiner Boxes Technical Bulletin NAE1042510 / 10.2012 BENDER Inc. 700 Fox Chase, Coatesville
More informationRE22R2QGMR Star-Delta Timing Relay s 300h V AC/DC - 2C/O
Characteristics Star-Delta Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationElectronic timer CT-AHS OFF-delayed with 2 c/o contacts Data sheet
2CDC 251 113 F0004 CT-AHS 1 7 2 6 5 4 8 3 1 10 selectable time ranges, from 0.05 s to 300 h 2 Potentiometer with direct reading scale for the fine adjustment of the time delay 3 Sliding switch to set the
More informationElectronic timer CT-EAS ON-delayed and OFF-delayed with 1 c/o contact Data sheet
2CDC 251 116 F0004 1 5 2 4 3 6 Characteristics Single-function ON-delay and OFF-delay timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the time delay Remote potentiometer
More informationSyr-line TMR48D Digital Timer
yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05 s 9999 h) Multi-voltage
More informationSolid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket
Solid-state Timer Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating modes. Conforms
More informationRM4LA32M liquid level control relay RM4-L V AC
Characteristics liquid level control relay RM4-L - 220..240 V AC Complementary [Un] rated nominal voltage Operating voltage tolerance Width Output contacts Maximum electrode voltage Maximum electrode current
More informationZelio Control-modular measurement and control relays 1
Presentation, description 1 106439 RM35 TM111MW Presentation Motor temperature measurement and 50MW and RM35 TM250MW monitor the following, on 3-phase supplies: correct sequencing of phases L1, L2 and
More informationRUC industrial relays of small dimensions
RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching
More information02/11/2015
DIN Rail Mount 22.5 mm TU2R1 Part number 88865305 Product with 1 relays (88 865 100/103/105/115/125/135/145/155/185/503) : Replaced by the 17,5 mm range For instance : previous part number 88 865 XXX /
More informationConforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren
Solid-state Power OFF-delay Timer II DIN 22.5-mm Solid-state Power OFF-delay Timer High immunity to invertor noise. Long power OFF-delay times; S-series: up to 12 seconds, L-series: up to 120 seconds.
More informationSingle-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
70 Series - Line monitoring relay 70 Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring
More informationSwitching relay CT-IRS with 1, 2 or 3 c/o contacts Data sheet
1SVR 430 221 F7300 2 1 3 Characteristics Switching relay ON-delay approx. 10 ms 1, 2 or 3 c/o contacts Switching relay with gold-plated contacts Width 22.5 mm Approvals e f GOST CCC CT-IRS 1 U/R: green
More informationRE22R2AMR On-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics Ondelay Timing Relay 0.05s 300h 24 240V AC/DC 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Zelio Time Modular timing
More informationElectronic timer CT-VBS OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F Approvals a culus f CCC CT-BS Circuit diagram Marker label Marks g c CE C-Tick Order data
More informationSwitching relay CT-IRE with 1 c/o (SPDT) contact
Data sheet Switching relay CT-IRE with 1 c/o (SPDT) contact The CT-IRE is a switching relay from the CT-E range. The CT-E range is the economic range of ABB s time relays and offers a cost effective price-performance
More informationSALES NUMBER NUMBER OF BEAMS PROTECTIVE HEIGHT
SECTION 21 182 Safety Light Curtains Type: SLC-F Finger (14mm) FEATURES: Resolution: 14mm Protective height: 160mm to 1040mm Type 4 according to IEC61496-1 and -2 ORDERING INFORMATION: SALES OF BEAMS PROTECTIVE
More informationTemperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
More informationRE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC
Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Complementary Product front plate size Control type Housing material Main Range of product Product or component type Electrical
More informationRE17LAMW on-delay timing relay - 1 s..100 h V AC/ DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/ DC - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type Time
More information08/07/2015
DIN Rail Mount 22.5 mm TUR1 Part number 88865105 Product with 1 relays (88 865 100/103/105/115/125/135/145/155/185/503) : Replaced by the 17,5 mm range For instance : previous part number 88 865 XXX /
More informationFor full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Monitoring Relays For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Dual-Channel Safety Monitoring Relay Power
More informationElectronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact The CT-ARE is an electronic time relay with OFF-delay. It is from the CT-E range. The CT-E range is the economic
More informationRE17LCBM off-delay timing relay - control - 1 s..100 h V - solid state output
Characteristics off-delay timing relay - control - 1 s..100 h - 24..240 V - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type
More informationEnergy Management Modular DC Energy analyzer Type VMU-E and VMU-X
Energy Management Modular DC Energy analyzer Type VMU-E and VMU-X Modular solution based on the combination of two units: VMU-E analysis unit and VMU-X universal power supply and RS485 communication unit.
More informationZelio Count - Counters RC87610
Zelio Count - Counters RC87610 Catalog March 05 Class 9051 CONTENTS Description..............................................Page Product Description........................................... RC87610050
More information02/11/2015
DIN Rail Mount 22.5 mm ETM2 Part number 84874023 Version ETM : Controls temperature of machines using built-in PTC probes Line break or probe short-circuit detection Version ETM2 / ETM22 : Fault latching
More information78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
More informationRM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA 250 V AC
Characteristics phase control relay RM17-T - range 183..484 V AC Complementary Maximum switching voltage Minimum switching current [Us] rated supply voltage Supply voltage limits Control circuit voltage
More informationSignal conditioning instruments for level switches. Conductive VEGATOR 256C VEGATOR 532 VEGATOR 631. Product Information
Signal conditioning instruments for level switches Conductive VEGATOR C VEGATOR VEGATOR Product Information Content Content Product description..........................................................................
More informationRE22R2AMR On-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics On-delay Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationPC-200-LLC-GM INSTALLATION INSTRUCTIONS. Revision A1 Rapid City, SD, USA, 10/2009 II_PC-XXX-LLC-GM_A1
INSTALLATION INSTRUCTIONS Revision A1 Rapid City, SD, USA, 10/2009 MODELS PC-100-LLC-GM PC-200-LLC-GM II_PC-XXX-LLC-GM_A1 2880 North Plaza Drive, Rapid City, South Dakota 57702 (800) 843-8848 (605) 348-5580
More informationRM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
More informationRE22R2CMR Off-delay Timing Relay s 300h V AC/DC - 2C/O
Characteristics Off-delay Timing Relay - 0.05s 300h - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationOPERATING INSTRUCTIONS 7 SERIES STATIC GENERATORS
OPERATING INSTRUCTIONS 7 SERIES STATIC GENERATORS GB Contents Page 1 Introduction 4 2 Safety 5 3 Use 6 4 Checking on Delivered Equipment 6 5 General Specification and Dimensions 7 6 Positioning 10 7 Operating
More informationDisplays Transducers. Displays and transducers
JJ Displays JJ Transducers Displays and transducers DS_Displays_and_transducers 06/2016 225 Displays and transducers Our electronic devices for flow and volume measurement are suitable for all SIKA flow
More informationRE22R2KMR Off-delay Timing Relay s 10min V AC/DC - 2C/O
Characteristics Off-delay Timing Relay - 0.05s 10min - 24 240V AC/DC - 2C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts
More informationMotor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
More informationOperating Instructions. For. Level Control Module. Model SSR 1000
Operating Instructions For Level Control Module Model SSR 1000 SSR Operation Instructions Rev. 1 Jan 01 Page 1/7 1. Note Please read and take note of these operating instructions before unpacking and commissioning.
More informationRE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC
Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Product availability : Stock - Normally stocked in distribution facility Price* : 73.00 USD Main Range of product Product or
More informationRM84 miniature relays
RM84 miniature relays RM84 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) AC AC1 AC15 DC1 DC13 Motor load acc. to
More informationRUC industrial relays of small dimensions
with adaptor (V) with adaptor (H) Power relays of general application AC and DC coils Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB Versions: faston 187 (4,8 x 0,5 mm); faston
More informationRM35TF. Main. Product or component type. Product specific application. Relay monitored parameters 250 V AC 5 A AC
Characteristics multifunction phase control relay RM35-T - range 194..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
More informationMiniature Relays Series M25 Type M25-1 pole 16 A Monostable
Miniature Relays Series M25 Type M25-1 pole 16 A Miniature size mm PCB mounting 5 kv / 10 mm insulation Switching capacity 16 A / 250 General purpose, industrial electronics Sealed according IP 67 Low
More informationRUC industrial relays of small dimensions
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
More informationContact protection relay
Contact protection relay Ordering details SVR 450 08 F0000 The protects sensitive control contacts from excessive load. It can be used with latching function or without. Bounce time of control contacts
More informationRM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA
Characteristics phase control relay RM17-T - range 183..484 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Switching
More informationRUC-M industrial relays for DC loads
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Min. breaking capacity
More informationSquare D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
More informationElectronic timer CT-AWS Impulse-OFF with 2 c/o contacts Data sheet
CDC 51 1 F000 1 7 6 5 8 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 00 h, for the adjustment of the pulse time c/o contacts nd c/o contact can be
More informationVariTrans P The Problem The variety of tasks results in a large number of different devices.
Universal Isolation Amplifiers The Multimeter among the isolation amplifiers. With 480 switchable calibrated ranges and broad-range power supply. The broad-range power supply for all common supply voltages
More informationVZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
More informationMotor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
More informationTABLE OF CONTENTS Bulletin 700-HA General Purpose Relays and Timing Relays. Description Page Description Page. Description
9 Bulletin 700-HA Bulletin 700-HA 10 A Rating DPDT 3PDT Pin Style Terminals Standard ON/OFF Flag Indicator Finger Grips for Easy Installation and Removal Optional Manual Operator Optional Pilot Light Optional
More informationMeasuring and Monitoring Relays
Measuring and Monitoring Relays K8AB Series/61F-D21T Industry First! Two SPDT Outputs Available in New Models DIN Sized at 22.5 mm Seven slim models featuring a variety of innovative new functions. Single-phase
More informationJUMO ecotrans ph 03 Microprocessor transmitter/ switching device for ph/redox voltage and temperature
Page 1/7 JUMO ecotrans 03 Microprocessor transmitter/ switching device for /Redox voltage and temperature with a 2-line LCD for mounting on a 35 mm DIN rail Brief description Depending on the configuration,
More informationITEM ESM-BA301
ITEM 085613 ESM-BA301 Description Technical data Accessories Downloads Features ESM-BA.. Usage up to category 4 according to EN ISO 13849-1 LED status indicators 1-channel or 2-channel control 3 redundant
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
More informationGeneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays
eneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays The Relpol R2N and R4N eneral Purpose Miniature Power Relays, typically called miniature cube type in the industry, offer high reliability and
More informationMSR Level Control Relay Module Operating Instructions for Level Control Relay Module Model: MSR
Operating Instructions for Level Control Relay Module Model: MSR MSR Operation Instructions Rev. Apr 07 Page 1/8 1. Note Please read and take note of these operating instructions before unpacking and commissioning.
More informationAdvantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
More informationRE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/ O
Characteristics star-delta timing relay - 230VAC/440VAC - 1 C/ O Main Range of product Product or component type Discrete output type Device short name Nominal output current Zelio Time Modular timing
More informationRM4TR31 three-phase network control relay RM4-T - range V
Characteristics three-phase network control relay RM4-T - range 160..220 V Complementary [Us] rated supply voltage Control threshold undervoltage Control threshold overvoltage Output contacts Main Range
More informationRE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/O
Characteristics star-delta timing relay - 230VAC/440VAC - 1 C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts type
More informationMicro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
More informationV REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
More informationHID. GE Consumer & Industrial Multilin. High Impedance Differential Module Instruction manual GEK Copyright 2005 GE Multilin
g GE Consumer & Industrial Multilin HID High Impedance Differential Module Instruction manual GEK-113064 Copyright 2005 GE Multilin GE Multilin 215 Anderson Avenue L6E 1B3 Markham, ON -CANADA T (905) 294
More informationVital. Safety controller. Approvals: Control of: Features: Entire safety system based on the dynamic safety circuit.
Safety controller Vital Approvals: TÜV Nord Vital 1 TÜV Rheinland Vital and 3 Control of: Entire safety system based on the dynamic safety circuit. Features: Vital is based on a single channel safety concept
More informationRE Product data sheet Characteristics. universal plug-in timing relay - flashing s..60 mn V AC - 2 OC. Main.
Characteristics universal plug-in timing relay - flashing - 0.1 s..60 mn - 24..240 V AC - 2 OC Main Range of product Product or component type Discrete output type Contacts type and composition Width pitch
More informationVoltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages The CM-ESS.1 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules 39 SERIES Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention
More informationRMCN22BD Analog Converter ma - for Zelio Analog
Characteristics Analog Converter - 4..20 ma - for Zelio Analog Main Commercial Status Range of product Product or component type Analogue input type Analogue output type Commercialised Zelio Analog Voltage/Current
More informationModule 18plus. Description. 18plus
Module 8plus Description Wiring of load and signal lines in a space-saving manner will become ever more important for designers of electrical plants and systems, because all control cabinets and control
More informationRSB1A160JD interface plug-in relay - Zelio RSB - 1 C/O - 12 V DC - 16 A
Characteristics interface plug-in relay - Zelio RSB - 1 C/O - 12 V DC - 16 A Complementary Shape of pin Main Range of product Series name Product or component type Device short name Contacts type and composition
More informationMulti Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationSolid-state Timer. Mounting system contact t contact. t Surface mounting/ track mounting
Solid-state Timer DIN-sized (48 x 48, 45 x 75 mm) Timer with Digital Setting and LCD Display Dual power supplies for free AC/DC. Eight operation modes selectable with one unit. Any desired time can be
More informationSolid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
More informationVEO. V2ZS V AC/DC Art.Nr.: V2ZS20P V AC/DC Art.Nr.: TECHNICAL DATA
4 time ranges 4 transition times Supply voltage 12-240V AC/DC 2 normally open contacts Width 22,5 mm Control elements Fine adjustment star contactor Setting of time range star contactor Transit time Status
More informationAlarm Unit DG 3200 Control And Monitor Standard Signals
Alarm Unit DG 3200 Control And Monitor Standard Signals With the Alarm Unit DG 3200 DRAGO is extending its offer on high-functional and high-reliable components of the interface technique. The Alarm Unit
More informationSafety control unit B1 / B1. for 2 to 16 machine safety sensors. Use. Types. + PLd according to EN ISO
Safety control unit for 2 to 16 machine safety sensors 470 121 B1 / 470 125 B1 + PLd according to EN ISO 13849-1 + two safety outputs and external contactor monitoring + for sensors with N.O./N.C. system
More information