QT-Brightek PLCC Series PLCC4 RGB LED

Transcription

1 QT-Brightek PLCC Series PLCC4 RGB LED Part No.: QBLP1515B-RGBA Product: QBLP1515B-RGBA Date: December 11, 2017 Page 1 of 10

2 Table of Contents: Introduction... 3 Electrical / Optical Characteristic (T A =25 o C)... 4 Absolute Maximum Rating... 4 Solder Profile & Footprint... 7 Packing... 8 Ordering Information... 9 Revision History Disclaimer Product: QBLP1515B-RGBA Date: December 11, 2017 Page 2 of 10

3 Introduction Feature: Diffused lens Package in tape and reel Ultra bright PLCC4 RGB LED Common Anode InGaN technology for IB/IG AlInGaP technology for R 120 degree viewing angle Black Housing Description: This PLCC4 RGB LEDs have a height profile of 1.00mm. Combination of high brightness output and robust package, this LED is ideal for architecture lighting, status indication, and color mixing applications. Dimension: Application: Status indication Back lighting application Architecture lighting Certification & Compliance: TS16949 ISO9001 RoHS Compliant Units: mm / tolerance = +/-0.2mm Product: QBLP1515B-RGBA Date: December 11, 2017 Page 3 of 10

4 Electrical / Optical Characteristic (T A =25 o C) Product Color I F (ma) QBLP1515B-RGBA Absolute Maximum Rating V F (V) λ D (nm) I V (mcd) Typ. Max. Min. Typ. Max. Min. Typ. Red True Green Blue Material P d (mw) I F (ma) I FP (ma)* V R (V) T OP ( o C) T ST ( o C) T SOL ( o C)** InGaN ( IB/IG ) to to AlInGaP ( R ) to to *Duty 10KHz ** IR Reflow for no more than o C Luminous Intensity I V for I F =10mA Luminous Intensity I V for True I F =10mA Luminous Intensity I V for I F =10mA mcd mcd mcd Product: QBLP1515B-RGBA Date: December 11, 2017 Page 4 of 10

5 Dominant Wavelength λ D for I F =10mA A R R nm Dominant Wavelength λ D for True I F =10mA TG TG TG Dominant Wavelength λ D for I F =10mA B B B nm nm Note: Tolerance of measurement of luminous intensity: ±15% Tolerance of measurement of dominant wavelength: ±2nm Product: QBLP1515B-RGBA Date: December 11, 2017 Page 5 of 10

6 Characteristic Curves Product: QBLP1515B-RGBA Date: December 11, 2017 Page 6 of 10

7 temperature QBLP1515B-RGBA PLCC4 RGB LED Solder Profile & Footprint -Recommended tin glue specifications: melting temperature in the range of 178~192 O C -The recommended reflow soldering profile is as follows (temperatures indicated are as measured on the surface of the LED resin): /sec 260 max Pre heating max 2-5 /sec 120sec.Max 10sec. max 2-5 /sec 50sec.max Time sec ( Proposed Solder footprint ) Units: mm tolerance: +/- 0.2mm Product: QBLP1515B-RGBA Date: December 11, 2017 Page 7 of 10

8 Packing Reel Dimension: Tape Dimension: Unit: mm Unit: mm Product: QBLP1515B-RGBA Date: December 11, 2017 Page 8 of 10

9 Packaging Specification: Labeling Ordering Information Part # Orderable Part # Spec Range Quantity per reel Red: 150mcd I F =10mA / Color: 612nm to 627nm QBLP1515B-RGBA QBLP1515B-RGBA True Green: 250mcd I F =10mA / Color: 516nm to 531nm Blue: 55mcd IF=10mA / Color: 460nm to 475nm 3,500 units Product: QBLP1515B-RGBA Date: December 11, 2017 Page 9 of 10

10 Revision History Description: Revision # Revision Date New Release of QBLP1515B-RGBA V1.0 11/19/2015 Amend the brightness of RGB V1.1 03/15/2016 Update packing spec to 3500pcs per reel V1.2 12/11/2017 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: QBLP1515B-RGBA Date: December 11, 2017 Page 10 of 10