This release of the product includes these new features that have been added since NGFW 5.5.

Size: px
Start display at page:

Download "This release of the product includes these new features that have been added since NGFW 5.5."

Transcription

1 Release Notes Revision A McAfee Next Generation Firewall Contents About this release New features Enhancements Known limitations Resolved issues System requirements Installation instructions Upgrade instructions Additional information Build version Compatibility Known issues Find product documentation About this release This document contains important information about the current release. We strongly recommend that you read the entire document. The Security Engine product name has changed in this release. The Security Engine is now known as the McAfee Next Generation Firewall or NG. NG engines are still represented by Security Engine elements in the Management Client. New features This release of the product includes these new features that have been added since NG 5.5. New features introduced in NG 5.7 Botnet detection McAfee NG now supports botnet detection using the following new Command and Control (C&C) communication detection methods: - Decryption-based detection: Detect known characteristics of the botnet C&C, port number, carrier, encryption protocol, and key material. - Message length sequence analysis detection: Extract message length for sequence analysis for botnet C&C detection. 1

2 New features introduced in NG 5.6 Virtual Security Engines in and Layer 2 Firewall roles McAfee NG now supports Virtual Security Engines in the Virtual and Layer 2 Firewall roles. Support for the Virtual Firewall/VPN role was added in version 5.5. Virtual Security Engines are logically separate engines that run as virtual engine instances on a physical engine device. You can now use a physical NG device as a Master Engine to provide resources for Virtual Security Engines. This means that the same Master Engine can simultaneously have different security policies, separate routing tables, and overlapping IP addresses for different interfaces (reserved by different Virtual Security Engines). You can configure up to 250 Virtual Firewalls, Virtual engines, or Virtual Layer 2 Firewalls per Master Engine. The Master Engine can be clustered. The Virtual Security Engines are load-balanced between the Master Engine nodes. One Master Engine handles all the traffic of one Virtual Security Engine at any given time. All Virtual Engines hosted by one Master Engine or Master Engine cluster must be in the same role. Virtual Security Engines do not require individual licenses. Instead, the license for the Master Engine defines how many Virtual Resources can be created. The number of Virtual Resources limits the number of Virtual Security Engines. In this major version, Virtual Security Engines can be used in the Firewall/VPN,, and Layer 2 Firewall roles with some limitations in normal engine features. Virtualization works across several administrative Domains. For example, the Master Engine can be in the Shared Domain and the Virtual Security Engines can be in one or several other Domains. Enhancements This release of the product includes these enhancements added since NG 5.5. Enhancements introduced in NG SNMP MIB enhancement SNMP MIB has been enhanced to include items that report the appliance model name and the POS code. For third-party hardware, the serial number is reported. TLS Heartbeat Extension detection Capability to detect TLS Heartbeat Extension has been added due to vulnerability CVE Enhancements introduced in NG 5.7 Application detection coverage has been improved The McAfee AppPrism Application signature library is now used for application detection with McAfee NG. Anti-virus engine changed The anti-virus engine used in McAfee NG engines is now based on the McAfee Anti-Virus Scanning Engine. Out of window TCP resets dropped in Normal Connection Tracking Mode without inspection Protection against spoofed TCP reset packets has been improved in Normal Connection Tracking Mode. In the new TCP reset protection feature, RFC 5961 blind reset attack protection is implemented in the engine on behalf of the connection endpoints. The feature is configured through the TCP Reset Sensitivity setting in the DoS Protection Settings in the engine properties. Rule tag logging Connection closed log entries now also contain the rule tag associated with the connection. Related connection log entries now also contain the rule tag of the parent connection. TLS 1.2 support in TLS inspection TLS protocol version 1.2 is now supported in TLS inspection for client protection and server protection. 2

3 Decompression in inspection By default, the engine now also decompresses Zip archives that have been compressed using the Deflate method when inspecting traffic. Enhancements introduced in NG 5.6 Scan detection You can configure Security Engines and Master Engines to detect if network ports are scanned. When you enable Scan Detection on a Firewall, engine, Layer 2 Firewall, Master Engine, or Virtual Security Engine, a log is generated if scan probes are detected. Security Engines and Master Engines support IPv4 and IPv6 protocols and detect TCP, UDP, and ICMP scan types. Scan detection has been redesigned in version 5.6. Scan detection performance has been optimized for multi-core platforms and the feature activation has been simplified. You can now define a general Scan Detection setting in the engine properties. You can override the general Scan Detection settings in Access rules. SYN flood protection You can configure Security Engines to detect SYN flood attacks. When you enable SYN flood protection on a Firewall, engine, Layer 2 Firewall, or Virtual Security Engine, a log is generated if a SYN flood is detected. The engine uses the SYN cookie method to prevent SYN packets sent from spoofed IP addresses from reaching the target host. When a SYN flood attack ends, a new log event is generated. The SYN flood protection feature has been redesigned in version 5.6. The performance of SYN flood protection has been optimized for multi-core platforms and the feature activation has been simplified. You can define SYN flood protection settings as part of general DoS Protection settings in the engine properties. You can override the general DoS Protection settings in Access rules. Protection against slow HTTP requests You can configure the Security Engines to detect very slow HTTP GET or POST requests that may indicate an attack against web applications and may cause a DoS situation. The engine uses a faster timeout for HTTP connections if the HTTP GET and POST requests are very slow. You can define protection against slow HTTP requests as part of general DoS Protection settings in the engine properties. You can override the general DoS Protection settings in Access rules. VLAN Interface support for engines and Layer 2 Firewalls You can now use VLAN Interfaces and re-tag network traffic on engines and Layer 2 Firewalls. The settings are configured in the engine properties. Ethernet MTU can be defined for engine and Layer 2 Firewall interfaces The Ethernet Maximum Transmission Unit (MTU) can now be defined for engine and Layer 2 Firewall interfaces in the engine properties. Improved connection tracking configuration for engines and Layer 2 Firewalls You can now choose between three connection tracking modes (Strict, Normal, and Loose) in the engine properties. You can override the engine-specific setting in Access rules. Interface link aggregation improved for Firewalls Interface link aggregation stability and performance have been improved in this major version. 3

4 Known limitations High-Security Inspection Policy and Strict TCP mode are not supported in asymmetrically routed networks in and Layer 2 Firewall roles The High-Security Inspection Policy and the Strict TCP mode are not supported in asymmetrically routed networks or in environments where an NG in the or Layer 2 Firewall role is directly connected to a load-balancing or high-availability network device. It is recommended to base policies on the Medium-Security Inspection Policy in such cases. In the Strict TCP mode and in the High-Security Inspection Policy, the engine controls the progress of a TCP connection and checks that the TCP handshake proceeds according to the TCP protocol. The same engine node must be able to see all the packets in the connection. In Strict TCP mode, the engine also enforces the packet direction (for example, SYN and SYN-ACK packets are not allowed from the same interface). The TLS inspection and Web filtering features use Strict TCP mode and are not supported in asymmetrically routed networks in the and Layer 2 Firewall roles. SSL/TLS inspection and web filtering are not supported in capture (IDS) mode The TLS inspection and web filtering features are not supported in capture (IDS) mode. Inline Interface Disconnect Mode in role The Inline Interface Disconnect Mode is not supported on Virtual Appliances, software installations, or appliance models other than -6xxx or modular appliance models on bypass NIC modules. Resolved issues These issues have been resolved since version NG For a list of issues that have been fixed in earlier releases, see the Release Notes for the specific release. Issue Role Description HTTP URL Filtering Situations cannot be used for correlation (#69500) User authentication is accepted even with trailing whitespace (#87050) Engine may fail to read user information (#93742) Existing Sun RPC connections may be discarded during policy installation (#95061) HTTP file transfers over 4 GB may not work if inspected (#96802) HTTP application caching issues (#97912) L2 L2 L2 L2 L2 HTTP URL Filtering situations cannot be used for correlation. User authentication is accepted even when there is trailing whitespace in the user name. However, traffic does not match rules that contain the user name without trailing white-space. The engine may occasionally fail to read the user information that is received from the User Agent. This may result in incorrect Access rule matching or no information being shown in the User field in the Logs view. In environments where Sun RPC is used, already established connections that use this protocol may be discarded by the engine during policy installation. HTTP file transfers with files over 4 GB in size may not work if the connection is inspected and the High-Security Inspection Policy is used. In some cases, Application detection has been activated even though the configuration does not require Application detection. For some connections, the engine has also reported the wrong application. 4

5 Virtual Security Engines may incorrectly drop packets as spoofed packets (#100829) Engine may fail to initialize Interfaces that have dynamic IP address (#103040) Security Engine may incorrectly change media settings configured in sgreconfigure (#103073) Browser-based authentication may work slowly in large environments (#104598) Security Engine may not send IPsec SA delete notification when IKEv2 is used (#104900) Ipsecpmd process may restart (#105171) Connections transferred to another node during failover may be in wrong connection state (#105327) User information not always added to DHCP request (#105467) Engine may lose connectivity with User Agent (#105653) 2nd level forwarding may not work on a standby/offline node if Heartbeat Interface has CVI address (#105659) L2 L2 L2 Virtual Security Engines may incorrectly drop packets as spoofed packets after the interface configuration has been changed. The Information Message column in the logs shows a message similar to "spoofed packet. NIC index asymmetry. The packet did not come through correct NIC." Workaround: Reboot the Master Engines after making interface configuration changes. The Firewall engine may fail to initialize Interfaces that have a dynamic IP address because of certain race conditions. This may cause the Firewall engine to go to the wrong state during reboot. The Security Engine may incorrectly change the interface media settings configured in sg-reconfigure. Workaround: Run sg-reconfigure again and set the forced media settings for each interface, even if the settings appear to be forced already. Browser-based authentication may work slowly in large environments with a large number of users authenticating simultaneously. The Security Engine may not send an IPsec delete notification to the other peer when IKEv2 is used. The Ipsecpmd process may restart. When failover happens on a Firewall Cluster, connections transferred from one node to the other may be in the wrong connection state. User information is not added to the DHCP request for the IPsec VPN Client user's virtual IP address in cases where the VPN EAP pass-through authentication method is used. This affects third-party IPsec VPN Clients that use IKEv2. The Security Engine may lose connectivity with the User Agent. As a result, Access Rules with Users or User Groups may stop working. 2nd level forwarding may not work on a standby/offline node if the Heartbeat Interface has a CVI address configured. Workaround: Do not use a CVI address. Alternatively, select "Encrypt and Sign" as the Sync Security Level setting on the Advanced tab in the Firewall's settings. 5

6 Large number of interfaces on engine may result in memory corruption messages (#105738) Related connections that use TCP ECN are not properly handled (#105801) OpenSSL library update (#106380) Security Engine not stable in systems that use tg3 driver (#102725) L2 L2 L2 A large number of interfaces on an engine may cause several diagnostic messages to be sent to the local console. If the following types of diagnostic messages appear, do not add more interfaces or VLAN Interfaces. Doing so may cause the engine to become unstable. Messages indicating this issue: " h2a_memcheck:memory corrupted (invalid end magic 0xcdcdfffd size=36)" " h2a_memcheck:memory corrupted (invalid begin magic 0xabababab" "upd_loop:1454:h2a_memcheck(trans_info.cur.need_upd=ffff e808)" Related connections that enable TCP Explicit Congestion Notification (ECN) are not properly handled. The OpenSSL library has been updated to version 1.0.1g to address the issue listed in CVE The engine uses vulnerable OpenSSL routines only for its TLS management communications and cluster communications between the cluster nodes. Workaround: If you use the default template from dynamic update package 575 or newer, engine exposure is limited, as connections to vulnerable TLS endpoints are allowed only from the Management Server IP address. The Security Engine does not work reliably in third-party hardware platforms that use a tg3 driver. 6

7 System requirements McAfee NG appliances Appliance model -315 MIL Supported roles Firewall/VPN Firewall/VPN Firewall/VPN Firewall/VPN Firewall/VPN and Layer 2 Firewall and Layer 2 Firewall and Layer 2 Firewall 1035 Firewall/VPN,, and Layer 2 Firewall 1065 Firewall/VPN,, and Layer 2 Firewall 1301 Firewall/VPN,, and Layer 2 Firewall 1302 Firewall/VPN,, and Layer 2 Firewall 1402 Firewall/VPN,, and Layer 2 Firewall 3201 Firewall/VPN,, and Layer 2 Firewall 3202 Firewall/VPN,, and Layer 2 Firewall 3205 Firewall/VPN,, and Layer 2 Firewall 3206 Firewall/VPN,, and Layer 2 Firewall 5201 Firewall/VPN,, and Layer 2 Firewall 5205 Firewall/VPN,, and Layer 2 Firewall 5206 Firewall/VPN,, and Layer 2 Firewall Some features in this release are not available for all appliance models. See and for up-to-date appliance-specific software compatibility information. McAfee appliances support only the software architecture version (32-bit or 64-bit) that they are shipped with. Certified Intel platforms McAfee has certified specific Intel-based platforms for the Next Generation Firewall. Tested platforms can be found from McAfee Support Knowledge Center ( under the Next Generation Firewall product. We strongly recommend using certified hardware or a pre-installed McAfee appliance as the hardware solution for new McAfee NG installations. If it is not possible to use a certified platform, the NG can also run on standard Intel-based hardware that fulfills the hardware requirements. 7

8 Basic NG hardware requirements Intel Core 2 / Intel Xeon based hardware IDE hard disk (IDE RAID controllers are not supported) and CD-ROM drive Memory: 2 GB RAM minimum for 32-bit (i386) installation 8 GB RAM minimum for 64-bit (x86-64) installation VGA-compatible display and keyboard One or more certified network interfaces for the Firewall/VPN role 2 or more certified network interfaces for with IDS configuration 3 or more certified network interfaces for Inline or Layer 2 Firewall For more information on certified network interfaces, see Requirements for Master Engines Each Master Engine must run on a separate physical NG device. For more details, please read the hardware requirements document at All the Virtual Security Engines hosted by a Master Engine or Master Engine cluster must have the same role and the same Failure Mode ( fail-open or fail-close ). Master Engines can allocate VLANs or interfaces to Virtual Security Engines. If the Failure Mode of the Virtual engines or Virtual Layer 2 Firewalls is Normal (fail-close) and you want to allocate VLANs to several engines, you must use the Master Engine cluster in standby mode. Cabling requirements for Master Engine clusters that host Virtual engines or Layer 2 Firewalls: Failure Mode Bypass (fail-open) requires serial cluster cabling. Failure Mode Normal (fail-close) requires Layer 2 Firewall cluster cabling. For more information on cabling, see the McAfee NG Reference Guide for and Layer 2 Firewall Roles. Requirements for Virtual Appliance Nodes VMware ESXi versions 5.1 and GB virtual disk 1 GB RAM minimum, 2 GB recommended if inspection is used A minimum of one virtual network interface for the Firewall/VPN role, three for or Layer 2 Firewall roles The following limitations apply when a McAfee NG is run as a virtual appliance node in the Firewall/VPN role: Only Packet Dispatching CVI mode is supported. Only Standby clustering mode is supported. Heartbeat requires a dedicated non-vlan-tagged interface. The following limitations apply when a McAfee NG is run as a virtual appliance node in the or Layer 2 Firewall role: Clustering is not supported. 8

9 Installation instructions Note The sgadmin user is reserved for McAfee use on Linux, so it must not exist before the McAfee Security Management Center is installed for the first time. The main installation steps for the McAfee Security Management Center (SMC) and the NG engines are as follows: 1. Install the Management Server, the Log Server(s), and optionally the Web Portal Server(s) and the Authentication Server(s). 2. Import the licenses for all components (you can generate licenses on our website at 3. Configure the Firewall,, or Layer 2 Firewall elements with the Management Client using the Security Engine Configuration view. 4. Generate initial configurations for the engines by right-clicking each Firewall,, or Layer 2 Firewall element and selecting Save Initial Configuration. 5. Make the initial connection from the engines to the Management Server and enter the one-time password provided during Step Create and upload a policy on the engines using the Management Client. The detailed installation instructions can be found in the product-specific installation guides. For a more thorough explanation of using the McAfee Security Management Center, refer to the Management Client Online Help or the McAfee SMC Administrator s Guide. For background information on how the system works, consult the McAfee SMC Reference Guide. All guides are available for download at Upgrade instructions McAfee NG version requires an updated license if upgrading from version 5.6.x or lower. The license upgrade can be requested at our website at Install the new license using the Management Client before upgrading the software. The license is updated automatically by the SMC if communication with McAfee servers is enabled and the maintenance contract is valid. Note The anti-virus engine changes from ClamAV to McAfee when upgrading from a version lower than to version or higher. To upgrade and maintain anti-virus scanning capability, these steps must be taken: 1. Upgrade SMC to version 5.7 or higher and the engine to version or a higher 5.5 version. 2. Before upgrading the engine, issue this command for each engine from the SMC monitoring view: Commands Update Anti-Virus Database 3. Wait until the Appliance Status monitoring view confirms that the new Anti-Virus signature database has been downloaded. 4. Upgrade the engine using the remote upgrade feature normally. If the engine does not have the new Anti-Virus database available before the upgrade, the upgrade can be done but it takes some time before Anti-Virus is operational again after the upgrade. 9

10 To upgrade the engine, use the remote upgrade feature or reboot from the installation CD and follow the instructions. Detailed instructions can be found in the McAfee NG Installation Guide for Firewall/VPN Role and the McAfee NG Installation Guide for and Layer 2 Firewall Roles. Note McAfee NG appliances support only the software architecture version that they are pre-installed with. 32-bit versions (i386) can only be upgraded to another 32-bit version and 64-bit versions (x86-64) can only be upgraded to another 64-bit version. Clusters can only have online nodes using the same software architecture version. State synchronization between 32-bit and 64-bit versions is not supported. Changing architecture for third-party server machines using software licenses requires full re-installation using a CD. Upgrading to any 5.7.x version is only supported from a 5.5.x, 5.6.x, or 5.7.x version. If you are running a lower version, upgrade first to the highest 5.5.x version following the instructions in the release notes for that version. Note If you have not changed the root password since engine version 4.x, change the root password before upgrading using the sg-reconfigure tool or the Management Client. If the upgrade is done without changing the root password, root login to the engine does not work after upgrading to or a higher version until the password has been reset in the Management Client. It is recommended to change root password in any case, as the salted hash of the root password is stored using a stronger hash (SHA-512) in version and higher. Additional information In this major version New brand Stonesoft Management Center is now called McAfee Security Management Center. At the same time, we have changed the main application icons, the OS level icons, the look and feel of the SMC installer, the login page, the Getting Started page, the Web Start page, the Web Portal, the browser-based user authentication pages, the Online Help, and the SMC API documentation pages. We have also updated the Windows Service names and the default installation folder paths. The Security Engine product name has also changed in this release. The Security Engine is now known as the McAfee Next Generation Firewall or NG. NG engines are still represented by Security Engine elements in the Management Client. 10

11 Build version McAfee Next Generation Firewall version build version is Product Binary Checksums sg_engine_ _i386.iso SHA1SUM de887a87e7e7cbc01654baa348f2add9f7734db9 SHA512SUM 3d d4b81993c13f07f03b99f3ed513bcb f6d9e009cc8571d38a0f83c6e f4da9c56 d195d12e939a dec99dd3611f022a7d9d sg_engine_ _i386.zip SHA1SUM d50220cc258e9d85f5fe66e01813b7ee24bccc03 SHA512SUM ae79ec97150be2bec1d0ace732f d004968e1b f7bbfda98b568b4441cd61234cf e1d5085cbeee6d40560b5caee896b09a7751c739 sg_engine_ _x86-64.iso SHA1SUM 20c20eeafbfa74fe380e62b3ddef557566d85807 SHA512SUM 495caed376bb38767c8fb6dcaae346ba5a12c57f9ff30e982b65716df e79a2fb134ab8c35f524cdb 73637c21c81f35f8a3da0dfea3fc8788defc5fed sg_engine_ _x86-64.zip SHA1SUM 7a02d7eee58d5dcf09e2df6c1024a16e841efaa8 SHA512SUM 21fabeb406eac6560adfd2d16d08f575790f cc c5ea54d5d9e8a7aaba0e0ba06a d1f3f3a af4cf43b3599d5b860eb304 Compatibility Minimum McAfee NG version is compatible with the following component versions: McAfee Security Management Center or higher Dynamic Update 545 or higher Stonesoft IPsec VPN Client or higher Server Pool Monitoring Agent or higher User Agent or higher 11

12 Known issues The current important known issues of McAfee NG version are described in the table below. Issue Role Description Packet fragmentation in route-based VPN does not work (#105431) 10 GB bypass NICs may lose connectivity (#106178) Packet fragmentation in route-based VPN does not work properly. 10 GB bypass NICs may lose connectivity in certain conditions, for example, after a reboot, state transition, or an external network condition. Workaround: Create an empty file with following command: touch /data/config/base/disable_disconnectd. Reboot the engine. Find product documentation McAfee provides the information you need during each phase of product implementation, from installation to daily use and troubleshooting. After a product is released, information about the product is entered into the online Knowledge Base. Information about McAfee NG and McAfee Security Management Center can still be found at To access... User documentation Knowledge Base Do this... Go to Go to the Stonesoft Knowledge Base: The known issues database and the release notes can be found on the website. Go to the McAfee Knowledge Center: New material will be published under the Next Generation Firewall product. Copyright 2014 McAfee, Inc. Do not copy without permission. McAfee and the McAfee logo are trademarks or registered trademarks of McAfee, Inc. or its subsidiaries in the United States and other countries. Other names and brands may be claimed as the property of others. 00-A 12

This release of the product includes these new features that have been added since NGFW 5.5.

This release of the product includes these new features that have been added since NGFW 5.5. Release Notes Revision B McAfee Next Generation Firewall 5.7.3 Contents About this release New features Enhancements Known limitations Resolved issues System requirements Installation instructions Upgrade

More information

This release of the product includes these new features that have been added since NGFW 5.5.

This release of the product includes these new features that have been added since NGFW 5.5. Release Notes Revision B McAfee Next Generation Firewall 5.7.4 Contents About this release New features Enhancements Known limitations Resolved issues System requirements Installation instructions Upgrade

More information

This release of the product includes these new features that have been added since NGFW 5.5.

This release of the product includes these new features that have been added since NGFW 5.5. Release Notes Revision A McAfee Next Generation Firewall 5.7.9 Contents About this release New features Enhancements Known limitations Resolved issues System requirements Installation instructions Upgrade

More information

This release of the product includes these new features that have been added since NGFW 5.5.

This release of the product includes these new features that have been added since NGFW 5.5. Release Notes Revision A McAfee Next Generation Firewall 5.7.10 Contents About this release New features Enhancements Known limitations Resolved issues System requirements Installation instructions Upgrade

More information

This release of the product includes these new features that have been added since NGFW 5.5.

This release of the product includes these new features that have been added since NGFW 5.5. Release Notes Revision A McAfee Next Generation Firewall 5.7.8 Contents About this release New features Enhancements Known limitations Resolved issues System requirements Installation instructions Upgrade

More information

This release of the product includes these new features that have been added since NGFW 5.5.

This release of the product includes these new features that have been added since NGFW 5.5. Release Notes Revision A McAfee Next Generation Firewall 5.7.6 Contents About this release New features Enhancements Known limitations Resolved issues System requirements Installation instructions Upgrade

More information

This document contains important information about the current release. We strongly recommend that you read the entire document.

This document contains important information about the current release. We strongly recommend that you read the entire document. Release Notes Revision B Stonesoft Security Engine 5.5.16 Contents About this release New features Enhancements Resolved issues Known limitations System requirements Build version Compatibility Installation

More information

This release of the product includes these new features that have been added since NGFW 5.7.

This release of the product includes these new features that have been added since NGFW 5.7. Release Notes Revision A McAfee Next Generation Firewall 5.8.3 Contents About this release New features Enhancements Changes Known limitations Resolved issues System requirements Installation instructions

More information

McAfee Next Generation Firewall 5.9.1

McAfee Next Generation Firewall 5.9.1 Release Notes Revision A McAfee Next Generation Firewall 5.9.1 Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Find product documentation About

More information

Next Generation Firewall

Next Generation Firewall Next Generation Firewall Release Notes 5.10.10 Revision A Contents About this release on page 2 Lifecycle model on page 2 System requirements on page 3 Build version on page 6 Compatibility on page 7 New

More information

Stonesoft Next Generation Firewall

Stonesoft Next Generation Firewall Stonesoft Next Generation Firewall Release Notes 6.1.3 Revision B Contents About this release on page 2 Lifecycle model on page 2 System requirements on page 3 Build version on page 6 Compatibility on

More information

Stonesoft Next Generation Firewall. Release Notes Revision B

Stonesoft Next Generation Firewall. Release Notes Revision B Stonesoft Next Generation Firewall Release Notes 5.10.5 Revision B Table of contents 1 About this release...3 System requirements... 3 Build version...6 Compatibility...7 2 New features...8 3 Enhancements...

More information

Stonesoft Next Generation Firewall. Release Notes Revision C

Stonesoft Next Generation Firewall. Release Notes Revision C Stonesoft Next Generation Firewall Release Notes 5.10.4 Revision C Table of contents 1 About this release...3 System requirements... 3 Build version...6 Compatibility...7 2 New features...8 3 Enhancements...

More information

Stonesoft Security Engine. Release Notes for Version 5.5.3

Stonesoft Security Engine. Release Notes for Version 5.5.3 Stonesoft Security Engine Release Notes for Version 5.5.3 Created: November 8, 2013 Table of Contents What s New... 3 New Features... 3 Enhancements... 4 Fixes... 5 Known Limitations... 7 System Requirements...

More information

Stonesoft Next Generation Firewall. Release Notes Revision A

Stonesoft Next Generation Firewall. Release Notes Revision A Stonesoft Next Generation Firewall Release Notes 5.10.1 Revision A Table of contents 1 About this release...3 System requirements... 3 Build version...6 Compatibility...7 2 New features...8 3 Enhancements...

More information

Stonesoft Security Engine. Release Notes for Version 5.4.6

Stonesoft Security Engine. Release Notes for Version 5.4.6 Stonesoft Security Engine Release Notes for Version 5.4.6 Created: September 2, 2013 Table of Contents What s New... 3 New Features in Role... 3 New Features in and Layer 2 Firewall Roles... 4 Enhancements...

More information

Stonesoft Security Engine. Release Notes for Version 5.5.1

Stonesoft Security Engine. Release Notes for Version 5.5.1 Stonesoft Security Engine Release Notes for Version 5.5.1 Created: July 25, 2013 Table of Contents What s New... 3 New Features... 3 Enhancements... 4 Fixes... 5 Known Limitations... 7 System Requirements...

More information

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.7

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.7 Stonesoft Firewall/VPN Express Release Notes for Version 5.5.7 Created: April 9, 2014 Table of Contents What s New... 3 Fixes... 3 System Requirements... 5 Stonesoft Firewall/VPN Appliances... 5 Build

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.4.8 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.3.3 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.3.4 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

Stonesoft Management Center. Release Notes for Version 5.6.1

Stonesoft Management Center. Release Notes for Version 5.6.1 Stonesoft Management Center Release Notes for Version 5.6.1 Updated: January 9, 2014 Table of Contents What s New... 3 Fixes... 3 System Requirements... 6 Basic Management System Hardware Requirements...

More information

McAfee Network Security Platform 8.1

McAfee Network Security Platform 8.1 Revision C McAfee Network Security Platform 8.1 (8.1.7.91-8.1.3.124 Manager-M-series Release Notes) Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.91-8.1.3.124-2.11.9 Manager-XC-Cluster Release Notes Network Security Platform 8.1 Revision B Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.3.0 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

This document contains important information about the current release. We strongly recommend that you read the entire document.

This document contains important information about the current release. We strongly recommend that you read the entire document. Release Notes Revision A McAfee Security Management Center 5.8.3 Contents About this release Resolved issues Installation instructions Upgrade instructions System requirements Build version Compatibility

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.3.8 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

Stonesoft Management Center. Release Notes for Version 5.4.6

Stonesoft Management Center. Release Notes for Version 5.4.6 Stonesoft Management Center Release Notes for Version 5.4.6 Created: June 19, 2013 Table of Contents What s New... 3 Fixes... 3 Other Changes... 4 System Requirements... 6 Basic Management System Hardware

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.3.7 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.4.0 Revision B Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 4 New features on page 5

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.91-8.1.7.44 Manager-Virtual IPS Release Notes Network Security Platform 8.1 Revision B Contents About this release New features Enhancements Resolved issues Installation instructions Known issues

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.3.5 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.3.2 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

Stonesoft Management Center. Release Notes Revision A

Stonesoft Management Center. Release Notes Revision A Stonesoft Management Center Release Notes 5.10.2 Revision A Table of contents 1 About this release...3 System requirements... 3 Build version...4 Compatibility... 5 2 New features...6 3 Enhancements...

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.4.4 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

Stonesoft Management Center. Release Notes for Version 5.5.1

Stonesoft Management Center. Release Notes for Version 5.5.1 Stonesoft Management Center Release Notes for Version 5.5.1 Updated: December 19, 2013 Table of Contents What s New... 3 Enhancements... 3 Fixes... 3 Other Changes... 5 System Requirements... 6 Basic Management

More information

StoneGate Management Center. Release Notes for Version 5.3.4

StoneGate Management Center. Release Notes for Version 5.3.4 StoneGate Management Center Release Notes for Version 5.3.4 Created: December 20, 2011 Table of Contents What s New... 3 Fixes... 3 Other Changes... 5 System Requirements... 6 Basic Management System Hardware

More information

Stonesoft Management Center. Release Notes for Version 5.4.3

Stonesoft Management Center. Release Notes for Version 5.4.3 Stonesoft Management Center Release Notes for Version 5.4.3 Created: November 26, 2012 Table of Contents What s New... 3 Fixes... 3 Other Changes... 4 System Requirements... 5 Basic Management System Hardware

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.4.3 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 4 New features on page 5

More information

Stonesoft Management Center. Release Notes Revision B

Stonesoft Management Center. Release Notes Revision B Stonesoft Management Center Release Notes 6.1.1 Revision B Table of contents 1 About this release...3 System requirements... 3 Build version...4 Compatibility... 5 2 New features...6 3 Enhancements...

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.4.1 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 4 New features on page 5

More information

Stonesoft Management Center. Release Notes Revision C

Stonesoft Management Center. Release Notes Revision C Stonesoft Management Center Release Notes 6.0.0 Revision C Table of contents 1 About this release...3 System requirements... 3 Build version...4 Compatibility... 5 2 New features...6 3 Enhancements...

More information

StoneGate Management Center. Release Notes for Version 5.3.3

StoneGate Management Center. Release Notes for Version 5.3.3 StoneGate Management Center Release Notes for Version 5.3.3 Created: October 21, 2011 Table of Contents What s New... 3 Fixes... 3 Other Changes... 4 System Requirements... 5 Basic Management System Hardware

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.4.7 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 5 New features on page 5

More information

Stonesoft Management Center. Release Notes Revision A

Stonesoft Management Center. Release Notes Revision A Stonesoft Management Center Release Notes 6.1.3 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 4 New features on page 5 Enhancements

More information

Stonesoft Management Center. Release Notes Revision B

Stonesoft Management Center. Release Notes Revision B Stonesoft Management Center Release Notes 6.1.0 Revision B Table of contents 1 About this release...3 System requirements... 3 Build version...4 Compatibility... 5 2 New features...6 3 Enhancements...

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.4.5 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 4 New features on page 5

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.5.3 Revision A Contents About this release on page 2 System requirements on page 2 Build number and checksums on page 4 Compatibility on page 5 New features

More information

StoneGate FW/VPN. Hardware Requirements for Version 5.2.0

StoneGate FW/VPN. Hardware Requirements for Version 5.2.0 StoneGate FW/VPN Hardware Requirements for Version 5.2.0 Created: September 6, 2010 Table of Contents System Requirements... 3 Stonesoft StoneGate Firewall/VPN Appliances... 3 Certified Intel Platforms...

More information

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.4

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.4 Stonesoft Firewall/VPN Express Release Notes for Version 5.5.4 Created: December 17, 2013 Table of Contents What s New... 3 Fixes... 3 System Requirements... 4 Stonesoft Firewall/VPN Appliances... 4 Build

More information

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.1

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.1 Stonesoft Firewall/VPN Express Release Notes for Version 5.5.1 Created: July 26, 2013 Table of Contents What s New... 3 Enhancements in Firewall/VPN Express... 3 Fixes... 3 System Requirements... 5 Stonesoft

More information

Stonesoft Management Center. Release Notes Revision B

Stonesoft Management Center. Release Notes Revision B Stonesoft Management Center Release Notes 6.0.4 Revision B Table of contents 1 About this release...3 System requirements... 3 Build version...4 Compatibility... 5 2 New features...6 3 Enhancements...

More information

McAfee Network Security Platform

McAfee Network Security Platform Revision B McAfee Network Security Platform (8.1.7.5-8.1.3.43 M-series Release Notes) Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product

More information

StoneGate Management Center. Release Notes for Version 5.3.2

StoneGate Management Center. Release Notes for Version 5.3.2 StoneGate Management Center Release Notes for Version 5.3.2 Created: September 21, 2011 Table of Contents What s New... 3 Enhancements... 3 Fixes... 3 Other Changes... 4 System Requirements... 5 Basic

More information

StoneGate Management Center Release Notes for Version 4.2.1

StoneGate Management Center Release Notes for Version 4.2.1 StoneGate Management Center Release Notes for Version 4.2.1 Created: July 24, 2008 Table of Contents What s New... 3 System Requirements... 4 Build Version... 5 Compatibility... 5 Installation Instructions...

More information

NGFW Security Management Center

NGFW Security Management Center NGFW Security Management Center Release Notes 6.2.4 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 4 New features on page 5

More information

McAfee Network Security Platform 9.1

McAfee Network Security Platform 9.1 9.1.7.49-9.1.3.6 Manager-M-series, Mxx30-series, XC Cluster Release Notes McAfee Network Security Platform 9.1 Revision C Contents About the release New features Enhancements Resolved issues Installation

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.5-8.1.3.10 NTBA Appliance Release Notes Network Security Platform 8.1 Revision B Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Find

More information

Stonesoft Management Center. Release Notes Revision A

Stonesoft Management Center. Release Notes Revision A Stonesoft Management Center Release Notes 5.10.5 Revision A Table of contents 1 About this release...3 System requirements... 3 Build version...4 Compatibility... 5 2 New features...6 3 Enhancements...

More information

StoneGate SSL VPN Release Notes for Version 1.2.0

StoneGate SSL VPN Release Notes for Version 1.2.0 StoneGate SSL VPN Release Notes for Version 1.2.0 Created: November 6, 2008 Table of Contents What s New... 3 System Requirements... 4 Build Version... 4 Product Binary Checksums... 4 Compatibility...

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.3.6-8.1.3.5 M-series Release Notes Network Security Platform 8.1 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product documentation

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.91-8.1.3.40 NTBA Appliance Release Notes Network Security Platform 8.1 Revision B Contents About this release New features Enhancements Resolved issues Installation Instructions Known issues Product

More information

McAfee Network Security Platform 9.2

McAfee Network Security Platform 9.2 McAfee Network Security Platform 9.2 (9.2.7.22-9.2.7.20 Manager-Virtual IPS Release Notes) Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.5-8.1.3.43 M-series Release Notes Network Security Platform 8.1 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product documentation

More information

McAfee Network Security Platform 9.1

McAfee Network Security Platform 9.1 9.1.7.15-9.1.3.4 Manager-M-series, Mxx30-series, XC Cluster Release Notes McAfee Network Security Platform 9.1 Revision A Contents About this release New features Enhancements Resolved issues Installation

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 Revision A McAfee Network Security Platform 8.3 (8.3.7.86-8.3.7.59 Manager-Virtual IPS Release Notes) Contents About this release New features Enhancements Resolves issues Installation instructions Known

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 Revision A McAfee Network Security Platform 8.3 (8.3.7.86-8.3.5.53 Manager-NS-series Release Notes) Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

McAfee Network Security Platform 9.1

McAfee Network Security Platform 9.1 9.1.7.15-9.1.5.9 Manager-NS-series Release Notes McAfee Network Security Platform 9.1 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known issues

More information

StoneGate Management Center. Release Notes for Version 4.0.1

StoneGate Management Center. Release Notes for Version 4.0.1 StoneGate Management Center Release Notes for Version 4.0.1 Table of Contents What s New................................. page 3 System Requirements......................... page 6 Build Version...............................

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 8.3.7.28-8.3.7.6 Manager-Virtual IPS Release Notes McAfee Network Security Platform 8.3 Revision B Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

StoneGate Management Center. Release Notes for Version 4.1.2

StoneGate Management Center. Release Notes for Version 4.1.2 StoneGate Management Center Release Notes for Version 4.1.2 Table of Contents What s New........................... page 3 System Requirements................... page 8 Build Version.........................

More information

High Availability Synchronization PAN-OS 5.0.3

High Availability Synchronization PAN-OS 5.0.3 High Availability Synchronization PAN-OS 5.0.3 Revision B 2013, Palo Alto Networks, Inc. www.paloaltonetworks.com Contents Overview... 3 Device Configuration... 4 Network Configuration... 9 Objects Configuration...

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 8.3.7.68-8.3.7.55-8.3.7.14 Manager-Virtual IPS Release Notes McAfee Network Security Platform 8.3 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 Revision A McAfee Network Security Platform 8.3 (8.3.7.86-8.3.3.39 Manager-M-series Release Notes) Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

McAfee Network Security Platform 9.1

McAfee Network Security Platform 9.1 Revision A McAfee Network Security Platform 9.1 (9.1.7.73-9.1.3.11 Manager-M-series, Mxx30-series, and XC Cluster Release Notes) Contents About the release New features Enhancements Resolved Issues Installation

More information

StoneGate Management Center. Release Notes for Version 5.1.4

StoneGate Management Center. Release Notes for Version 5.1.4 StoneGate Management Center Release Notes for Version 5.1.4 Created: August 20, 2010 Table of Contents What s New... 3 Enhancements... 3 Fixes... 3 Major Changes Introduced in Version 5.1... 4 System Requirements...

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 8.3.7.28-8.3.3.9 Manager-Mxx30-series Release Notes McAfee Network Security Platform 8.3 Revision C Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.100-8.1.3.130 Manager-M-series Release Notes Network Security Platform 8.1 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known issues

More information

Stonesoft VPN Client. for Windows Release Notes Revision A

Stonesoft VPN Client. for Windows Release Notes Revision A Stonesoft VPN Client for Windows Release Notes 6.2.2 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 3 New features on page

More information

SUPERSTACK 3 FIREWALL FIRMWARE VERSION RELEASE NOTES

SUPERSTACK 3 FIREWALL FIRMWARE VERSION RELEASE NOTES SUPERSTACK 3 FIREWALL FIRMWARE VERSION 6.0.2 RELEASE NOTES Please use these notes in conjunction with the following documents: SuperStack 3 Firewall User Guide Part number: DUA1611-0AAA02 SuperStack 3

More information

McAfee Firewall Enterprise 8.3.2P05

McAfee Firewall Enterprise 8.3.2P05 Release Notes Revision A McAfee Firewall Enterprise 8.3.2P05 Contents About this release Resolved issues Installation instructions Known issues Find product documentation About this release This document

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.82-8.1.3.100 Manager-M-series Release Notes Network Security Platform 8.1 Revision B Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product

More information

McAfee NGFW Installation Guide for Firewall/VPN Role 5.7. NGFW Engine in the Firewall/VPN Role

McAfee NGFW Installation Guide for Firewall/VPN Role 5.7. NGFW Engine in the Firewall/VPN Role McAfee NGFW Installation Guide for Firewall/VPN Role 5.7 NGFW Engine in the Firewall/VPN Role Legal Information The use of the products described in these materials is subject to the then current end-user

More information

McAfee Network Security Platform

McAfee Network Security Platform Revision B McAfee Network Security Platform (9.2.9.3-9.2.5.34 Manager-NS3500 Release Notes) Contents About this release New Features Resolved issues Installation instructions Known issues Product documentation

More information

McAfee Network Security Platform 8.1

McAfee Network Security Platform 8.1 Revision A McAfee Network Security Platform 8.1 (8.1.7.105-8.1.5.219 Manager-NS-series Release Notes) Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

Installing Cisco APIC-EM on a Virtual Machine

Installing Cisco APIC-EM on a Virtual Machine About the Virtual Machine Installation, page 1 System Requirements Virtual Machine, page 2 Pre-Install Checklists, page 4 Cisco APIC-EM Ports Reference, page 7 Verifying the Cisco ISO Image, page 8 Installing

More information

Stonesoft VPN Client. for Windows Release Notes Revision A

Stonesoft VPN Client. for Windows Release Notes Revision A Stonesoft VPN Client for Windows Release Notes 6.2.1 Revision A Contents About this release on page 2 System requirements on page 2 Build version on page 3 Compatibility on page 3 New features on page

More information

Seqrite Unified Threat Management

Seqrite Unified Threat Management Seqrite Unified Threat Management 2.1 Release Notes July 2, 2018 Seqrite Unified Threat Management www.seqrite.com Copyright Information Copyright 2018 Quick Heal Technologies Ltd. All Rights Reserved.

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.96-8.1.3.130 Manager-M-series Release Notes Network Security Platform 8.1 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product

More information

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.2

Stonesoft Firewall/VPN Express. Release Notes for Version 5.5.2 Stonesoft Firewall/VPN Express Release Notes for Version 5.5.2 Created: September 24, 2013 Table of Contents What s New... 3 Fixes... 3 System Requirements... 4 Stonesoft Firewall/VPN Appliances... 4 Build

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 8.3.7.86-8.3.7.56 Manager-Virtual IPS Release Notes McAfee Network Security Platform 8.3 Revision C Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

Network Security Platform 8.1

Network Security Platform 8.1 FIPS Release Notes Network Security Platform 8.1 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product documentation About this

More information

McAfee Network Security Platform

McAfee Network Security Platform Revision A McAfee Network Security Platform (9.1.7.73-9.1.3.54 Manager-NTBA Release Notes) Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product

More information

Stonesoft Management Center. Release Notes for Version 5.5.0

Stonesoft Management Center. Release Notes for Version 5.5.0 Stonesoft Management Center Release Notes for Version 5.5.0 Created: May 6, 2013 Table of Contents What s New... 3 Features... 3 Enhancements... 4 Fixes... 6 Other Changes... 7 System Requirements... 8

More information

McAfee Web Gateway

McAfee Web Gateway Release Notes Revision A McAfee Web Gateway 7.6.2.4 Contents About this release Enhancement Resolved issues Installation instructions Known issues Find product documentation About this release This document

More information

Symbols INDEX > 12-14

Symbols INDEX > 12-14 INDEX Symbols > 12-14 A AAA accounting configuring 6-32 AAA-based management systems 2-25, 6-2 acceleration about 1-6, 12-1 features 1-6 TCP settings 12-17 accounts creating 7-3 creation process 7-2 deleting

More information

Network Security Platform 8.1

Network Security Platform 8.1 8.1.7.13-8.1.5.57 NS-series Release Notes Network Security Platform 8.1 Revision B Contents About this release New features Enhancements Resolved issues Installation instructions Known issues Product documentation

More information

Stonesoft Next Generation Firewall. Installation Guide 6.1. Revision A

Stonesoft Next Generation Firewall. Installation Guide 6.1. Revision A Stonesoft Next Generation Firewall Installation Guide 1 Revision A Table of contents Preface... 5 About this guide... 5 Find product documentation... 6 Introduction to Stonesoft Next Generation Firewall

More information

McAfee Network Security Platform 8.3

McAfee Network Security Platform 8.3 8.3.7.44-8.3.7.14 Manager-Virtual IPS Release Notes McAfee Network Security Platform 8.3 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known

More information

McAfee Network Security Platform 9.1

McAfee Network Security Platform 9.1 9.1.7.15-9.1.3.3 Manager-NTBA Release Notes McAfee Network Security Platform 9.1 Revision A Contents About this release New features Enhancements Resolved issues Installation instructions Known issues

More information