Computer Systems Lecture 9

Size: px

Start display at page:

Download "Computer Systems Lecture 9"

Junior John Newton
6 years ago
Views:

1 Computer Systems Lecture 9

2 CPU Registers in x86

3 CPU status flags EFLAG: The Flag register holds the CPU status flags The status flags are separate bits in EFLAG where information on important conditions such as overflow, or carry, is recorded.

4 CPU status flags

5 CPU status flags Most often used flags are: S :sign Z: zero, result being zero C: carry, indicates an arithmetic carry O: arithmetic overflow error

6 How CPU flags operate

7 Inline Assembler For the practical sessions we will use the inline Assembler within Microsoft Visual C++ Inline means you can insert assembly code directly into C/C++ programs, compile and execute them No knowledge of C/C++ is assumed

8 Inline Assembler Inline assembly language is a very close relative to the language of MASM (Microsoft Macro assembler) In fact, almost any MASM expression can be used in inline assembly code Inline assembly code can not use MASM directives for the definition (declaration) of data types and objects Data types and objects can be defined `outside of an _asm block as C or C++ data types and objects

9 Inline Assembler Inline assembly code can refer to C or C++ variables by name: _asm mov eax, var ; stores the value of ; var in EAX This example illustrates two more aspects: One can use _asm without brackets, in which case it works for only one line A semicolon ; is used for comments in the assembly program. Alternatively, one can use // for comments

10 Inline Assembler An _asm block can call C functions, including C library routines We will use the C library routines scanf and printf for input and output in our programs To pass arguments to the printf routine we will use a stack. It is time to discuss in more detail the important role of the stack.

11 The Stack A Stack is a memory arrangement (data structure) for storing and retrieving information (values) The order of storing and retrieving values from the stack can be described as LIFO (last in, first out) An example of an alternative memory arrangement is a queue: FIFO

12 The Stack Every stack is equipped with two operations: Push and Pop

13 The Stack The stack is a simple but very useful data structure. Almost any assembly language has special instructions for implementing a stack In inline assembly language there are PUSH and POP instructions PUSH and POP operations use the stack pointer register ESP to hold the address of the item which is currently on top of the stack

14 PUSH and POP PUSH instruction works: First by decrementing the address in ESP Then using the ESP address to write the item to memory POP instruction: The item is read using the ESP address The address is incremented by the correct amount to remove the item from the stack

15 Using PUSH and POP

16 Adjusting the stack pointer Sometimes the stack pointer has to be adjusted explicitly by the programmer ADD ESP,4 ; take 4 bytes off the stack ; (see example in the Hello World program) SUB ESP,256 ; create 256 bytes of space

17 The stack as temporary store /* demonstration of the use of asm instructions within C prog */ #include <stdio.h> #include <stdlib.h> int main (void) { char format[] = "Hello World\n"; // declare variables in C _asm { mov ecx,10 // initialize loop counter Lj: push ecx // loop count index saved on stack lea eax,format // push eax // address of string, stack parameter call printf // use library code subroutine add esp,4 //clean 4 byte parameter off stack pop ecx //restore loop counter ready for test loop Lj // dec ECX, jmp back IF NZ } // back to C return 0; }

18 Stack as temporary store In the above example, the stack was used as a scratch-pad temporary store to keep the value of the loop counter and free the ECX register for use This is a common use of the stack as a temporary store for variables (values)

19 Another use: passing parameters int main (void) { char format[] = "Hello World\n"; // declare variables in C _asm { mov ecx,10 // initialize loop counter Lj: push ecx // loop count index saved on stack lea eax,format // push eax call printf add esp,4 // address of string, stack parameter // use library code subroutine //clean 4 byte parameter off stack pop ecx //restore loop counter ready for test loop Lj // dec ECX, jmp back IF NZ } // back to C return 0; }

20 Passing parameters The printf routine needs extra information on what to print and how to print it. This should be passed as parameters. It is done via the stack: push eax puts the address of the string to be printed on the stack call printf reads the address from the top of the stack and prints the string, but it does not remove this address from the stack add esp,4 cleans the head of the stack (remove address)

21 Readings [W] Sections 7.2, 7.3,7.5, 8.4, 8.5

EECE.3170: Microprocessor Systems Design I Summer 2017 Homework 4 Solution

EECE.3170: Microprocessor Systems Design I Summer 2017 Homework 4 Solution 1. (40 points) Write the following subroutine in x86 assembly: Recall that: int f(int v1, int v2, int v3) { int x = v1 + v2; urn (x + v3) * (x v3); Subroutine arguments are passed on the stack, and can