1) Indicates that the identified danger WILL cause physical and property damage.

Size: px
Start display at page:

Download "1) Indicates that the identified danger WILL cause physical and property damage."

Transcription

1 FX INPUT AND OUTPUT TERINAL BLOKS USER S GUIDE JY99DE This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX TERINAL BLOKS. It should be read and understood before attempting to install or use the unit. Further information can be found in the FX series hardware manuals. If in doubt at any stage during the installation of the FX TERINAL BLOKS always consult a professional electrical engineer who is qualified and trained to the local and national standards. All terminal blocks described in this manual conform to the UL/cUL Standard. Note s on the symbology used in this manual At various times through out this manual certain symbols will be used to highlight points of information which are intended to ensure the users personal safety and protect the integrity of the equipment. Whenever any of the following symbols are encountered, its associated note must be read and understood. Each of the symbols used will now be listed with a brief description of its meaning. Hardware warnings ) Indicates that the identified danger WILL cause physical and property damage. ) Indicates that the identified danger could POSSIBLY cause physical and property damage. Guidelines for the safety of the user and protection of the FX TERINAL BLOKS This manual has been written to be used by trained and competent personnel. This is defined by the European directives for machinery, low voltage and E. If in doubt at any stage during the installation of the FX TERINAL BLOKS always consult a professional electrical engineer who is qualified and trained to the local and national standards. If in doubt about the operation or use of the FX TERINAL BLOKS please consult the nearest itsubishi Electric distributor. Under no circumstances will itsubishi Electric be liable or responsible for any consequential damage that may arise as a result of the installation or use of this equipment. All examples and diagrams shown in this manual are intended only as an aid to understanding the text, not to guarantee operation. itsubishi Electric will accept no responsibility for actual use of the product based on these illustrative examples. Owing to the very great variety in possible application of this equipment, you must satisfy yourself as to its suitability for your specific application.. INTRODUTION Terminal blocks convert I/O terminals of connector type into terminal blocks. Some terminal blocks directly extend inputs and outputs of. Other terminal blocks are equipped with diversified built-in devices, and function only as inputs or only as outputs. ODEL INPUT OUTPUT APPLIABLE FX-E-TB/UL FX-E-TB/UL pt (Direct input/output) pt or / pt (Direct input/output) FX-ooT-ESS/UL FXN-ooT-DSS FXN-ooEX-DS FXN-ooEYT-DSS FX-ooT-E/UL FX-EYR-ES-TB/UL pt (Relay) FX-EYS-ES-TB/UL pt (Triac) FX-EYT-ESS-TB/UL pt (Transistor source) FX-ooT-ESS/UL FXN-ooT-DSS FXN-ooEYT-DSS URRENT ONSUPTION 8mA (ma/pt) ma (ma/pt) FX-EYT-ES-TB/UL pt (Transistor sink) FX-EX-A-TB/UL pt (V A) FX-ooT-E/UL 8mA (ma/pt)

2 ODEL INPUT OUTPUT APPLIABLE FX-E-TB FX-E-TB pt (Direct input/output) pt or / pt (Direct input/output) FXN-ooT-D/UL FXN-ooEX-D/UL FXN-ooEYT-D/UL FX-EYR-TB pt (Relay) FXN-ooT-D/UL pt FX-EYT-TB FXN-ooEYT-D/UL (Transistor sink) FX-EX-A-TB pt (V A) FXN-ooT-D/UL FXN-ooEX-D/UL URRENT ONSUPTION 8mA (ma/pt) ma (ma/pt) 8mA (ma/pt). EXTERNAL DIENSION FX-E-TB/UL, FX-E-TB FX-EYo(o: R/T/S)-TB/UL FX-EYo(o: R/T)-TB FX-E-A-TB/UL, FX-E-A-TB FX-E-TB/UL FX-E-TB Accessories - Input / output extension block labels - Terminal layout cards. ONFIGURATION AND OPTIONS STANDARD PRE TERINATED ABLES LENGTHS FLAT ABLES ROUND ABLES. m (.9 ft) FX-E-AB FX-E-AB-R. m (9.8 ft) FX-E-AB FX-E-AB-R. m (. ft) FX-E-AB FX-E-AB-R. ONNETOR ABLE PIN ONFIGURATION The connections required between the FX, FXN main unit and a terminal block are shown in the diagram below with an example for inputs X to X and outputs Y to Y. The I/O connector should be the -pin type and should conform to IL 8 of ilitary Standard.

3 . TERINAL WIRING Never perform external wiring to unused terminals. Such wiring may damage the unit. Note Do not lay I/O cables next to power cables or allow them to share the same trunking duct. Where I/O signals are used over an extended distance consideration must be made for voltage drop and noise interference. Use crimp-style terminals of the dimensions shown in the figure below. Tighten terminals at a torque of. to.8 Nžm. Securely tighten terminals so that malfunction does not occur.. DIRET INPUT BLOKS AND DIRET OUTPUT BLOKS WIRING n Internal circuit && && && && && && && && N () () (9) (9) (8) () () () () () () () (8) () () () () () () () ## ## ## ## ## ## ## ## && && FX-E-TB && && && && && && && && N () () (9) (9) (8) () () () () () () () (8) () () () () () () () ## ## ## ## ## ## ## ## && && FX-E-TB n Inputs TYPE Inputs TYPIAL WIRING FX-ooT-ESS/UL Source (-ve S/S) PNP FX-ooT-E/UL FXN-ooT-D/UL FXN-ooEX-D/UL (+ve S/S) Inputs NPN Inputs Source PNP FXN-ooT-DSS FXN-ooEX-DS Inputs NPN

4 n Outputs TYPE TYPIAL WIRING Outputs FX-ooT-ESS/UL FXN-ooT-DSS FXN-ooEYT-DSS Source Lamp LED Fuse Outputs FX-ooT-E/UL FXN-ooT-D/UL FXN-ooEYT-D/UL Lamp LED Fuse For the I/O specifications and detailed information, refer to the FX Hardware anual or the FXN Hardware anual.. A INPUT BLOK WIRING n Specifications Voltages Impedance Input urrent ircuit isolation Operation indication OFF ð ON Switch Rating ON ð OFF Response time Signal input supply 8 - V A /Hz kω / Hz 8kΩ / Hz.mA V A/Hz.mA V A/Hz LED of base unit 8V.8mA V.mA - ms V D ma/pt n Typical wiring + -, Fuse Signal D Power Supply Fuse A Power Supply 8. OUTPUT BLOKS WIRING n Outputs specification RELAY TRIA TRANSISTOR Switched voltages Less than V A V D Between 8 - V A - V D ircuit isolation By relay coil of base unit Operation indication LED is lit when coil is active. aximum load Leakage current inimum load LED is lit when output is active. LED is lit when output is active. resistive A/pt 8A/pts(com).A/pt.8A/pts(com).A/pt.8A/pts(com) inductive 8VA VA, V A VA, V A W V D indicator W W.W V D ma V D ma, V A ma, V A.VA, V A.VA, V A.mA V D Response OFFðON Less than ms Approx..ms Approx. ms time ONðOFF Less than ms Approx..ms Indicator input supply V D ma/pt V D ma/pt V D ma/pt

5 n Relay output blocks FX-EYR-ES-TB/UL, FX-EYR-TB wiring OUTPUT No. ## ## && && Power supply for relays V D +% -% + - A D A A Terminal blocks are not equipped with built-in fuses. In order to prevent breakdown of circuits caused by load short-circuit, provide a fuse of to A for every four points. [ D LOAD ] onnect a noise suppression diode to a D inductive load in parallel. If the diode is not connected, the life time of the contact becomes considerably shorter. Select a noise suppression diode whose reverse withstand voltage is to times or more the load voltage and whose current in the forward direction is not less than the load current. [ A LOAD ] When a surge absorber is connected to an A inductive load in parallel, noise generation is reduced.. µf capacitor + to Ω resistor The standard life time of contactors and solenoid valves against A inductive load is, times of actuation against VA. The table below shows the guideline of the life time of relays based on the result of the life time test performed in our company. Have in mind that the life time of a relay contact becomes considerably shorter even in the condition below if the rush current is shut down. LOAD APAITY (Test condition: ON for second and OFF for second) VA 8VA VA.A / V A.A / V A.8A / V A.A / V A. / V A.A / V A LIFE TIE OF ONTAT,, times EXAPLE OF APPLIABLE LOAD (agnetic switch manufactured by our company) S-K ~ S-K S-N ~ S-N,, times S-K8 ~ S-K, times S-K, S-K8 n Triac output block FX-EYS-ES-TB/UL wiring A surge absorber is connected to each output. OUTPUT No. ## ## && && power supply V D + - +% -% A 8 - V A A 8 - V A Terminal blocks are not equipped with built-in fuses. In order to prevent breakdown of circuits caused by load short-circuit, provide a fuse of to A for every four points. [ INUTE URRENT LOAD ] To a neon lamp or a minute current load of.va/v A,.VA/V A or less, connect a surge absorber in parallel.

6 [ OUTPUT URRENT ] The current of. A can flow in each output point. However, in order to restrict temperature rise, flow.8 A to every four output points (=. A per point on an average). When turning on and off frequently a load with large rush current, set the square average current to. A or less. n Transistor output blocks wiring FX-EYT-ESS-TB/UL (source) A surge absorber is connected to each output. OUTPUT No. ## ## && && power supply V D +% -% A - V D A - V D FX-EYT-ES-TB/UL, FX-EYT-TB (sink) A surge absorber is connected to each output. OUTPUT No. ## ## && && power supply V D % -% A - V D - V D A Terminal blocks are not equipped with built-in fuses. In order to prevent breakdown of circuits caused by load short-circuit, provide a fuse of A for every four points. [ ON VOLTAGE ] The ON voltage of an output transistor is approximately. V. When driving a semiconductor device, etc., pay attention to the input voltage characteristics of the used device. anual number : JY99D anual revision : E Date : AR. HEAD OFFIE : ITSUBISHI DENKI BLDG ARUNOUTI TOKYO -8 TELEX : J ABLE ELO TOKYO HIEJI WORKS : 8, HIYODA HO, HIEJI, JAPAN JY99DE Effective AR. Specifications are subject to change without notice

USER S MANUAL. FX2N-32DP-IF Profibus-DP Interface Unit

USER S MANUAL. FX2N-32DP-IF Profibus-DP Interface Unit USER S MANUAL FX2N-32DP-IF Profibus-DP Interface Unit FX2N-32DP-IF Profibus-DP Interface Unit Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation

More information

FX1N JAPANESE SPECIFICATION UNITS

FX1N JAPANESE SPECIFICATION UNITS FX1N JAPANESE SPECIFICATION UNITS HARDWARE MANUA JY997D071A This manual contains safety information, associated manual listings, specifications and terminal layouts and wiring for Japanese specification

More information

FX-485PC-IF RS485 Interface Unit Hardware Manual

FX-485PC-IF RS485 Interface Unit Hardware Manual JY992D81801B Date: 2015 April FX- RS485 Interface Unit Hardware Manual This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the

More information

FX1N-4EX-BD Input Expansion Board

FX1N-4EX-BD Input Expansion Board Input Expansion Board USER S MANUAL JY992D95001C This manual contains text, diagrams and explanations which will guide the reader in the correct installation, safe use and operation of the FX 1N-4EX-BD

More information

FX1N-2EYT-BD Output Expansion Board

FX1N-2EYT-BD Output Expansion Board FX1N-2EYT-BD Output Expansion Board USER S MANUAL JY992D95201C This manual contains text, diagrams and explanations which will guide the reader in the correct installation, safe use and operation of the

More information

USER'S GUIDE FX-485ADP COMMUNICATION ADAPTER FX0N-485ADP COMMUNICATION ADAPTER

USER'S GUIDE FX-485ADP COMMUNICATION ADAPTER FX0N-485ADP COMMUNICATION ADAPTER FX- COMMUNICATION ADAPTER FX0N- COMMUNICATION ADAPTER USER'S GUIDE JY992D53201C This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation

More information

FX2N-4AD-PT SPECIAL FUNCTION BLOCK

FX2N-4AD-PT SPECIAL FUNCTION BLOCK FX2N-4AD-PT SPECIAL FUNCTION BLOCK USER S GUIDE JY992D65601G This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-4AD-PT

More information

HARDWARE MANUAL HCA1 SERIES PROGRAMMABLE CONTROLLERS

HARDWARE MANUAL HCA1 SERIES PROGRAMMABLE CONTROLLERS HARDWARE MANUAL HCA1 SERIES PROGRAMMABLE CONTROLLERS Foreword...2 1. Introduction...4 1.1 Model Name... 5 1.2 Specification... 6 1.3 Backup Data... 6 1.3.1 Data Backup...6 1.3.2 Capacitor backup... 7 2.

More information

USER S MANUAL. FX2N-64DNET DeviceNet Interface Block

USER S MANUAL. FX2N-64DNET DeviceNet Interface Block USER S MANUAL FX2N-64DNET DeviceNet Interface Block FX2N-64DNET DeviceNet Interface Block Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation

More information

USER S MANUAL. FX2N-32ASI-M AS-interface Master Block

USER S MANUAL. FX2N-32ASI-M AS-interface Master Block USER S MANUAL FX2N-32ASI-M AS-interface Master Block FX2N-32ASI-M AS-interface Master Block Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation

More information

FX-1HC SPECIAL FUNCTION BLOCK USER'S GUIDE

FX-1HC SPECIAL FUNCTION BLOCK USER'S GUIDE FX-1HC SPECIAL FUNCTION BLOCK USER'S GUIDE JY992D53001A This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX-1HC special

More information

V E1B Snap-in I/O Module

V E1B Snap-in I/O Module V200-18-E1B Snap-in I/O Module The V200-18-E1B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

HARDWARE MANUAL FX1N SERIES PROGRAMMABLE CONTROLLERS

HARDWARE MANUAL FX1N SERIES PROGRAMMABLE CONTROLLERS HARDWARE MANUAL FX1N SERIES PROGRAMMABLE CONTROLLERS FX1N Series Programmable Controllers Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation

More information

IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs

IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs The IO-DI8-TO8 is an I/O expansion module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 8 digital inputs,

More information

Manual name Manual No. Description. When installed to a PLC 2 (0.07) (1.57) (0.35) (1.03) (0.86) 28 (1.1) (0.55) 2.6(0.1) (1.25) 8 (0.31) 8 (0.

Manual name Manual No. Description. When installed to a PLC 2 (0.07) (1.57) (0.35) (1.03) (0.86) 28 (1.1) (0.55) 2.6(0.1) (1.25) 8 (0.31) 8 (0. ISPLA MOULE FXN5M USER S MANUAL J992490E This manual only describes the specifications for isplay Module FXN5M. For complete operation, wiring, mounting and programming instructions please refer to the

More information

V E1B Snap-in I/O Module

V E1B Snap-in I/O Module V200-18-E1B Snap-in I/O Module The V200-18-E1B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

V E2B Snap-in I/O Module

V E2B Snap-in I/O Module V200-18-E2B Snap-in I/O Module The V200-18-E2B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

INTRODUCTION FX2N-1HC SPECIAL FUNCTION BLOCK USER S GUIDE

INTRODUCTION FX2N-1HC SPECIAL FUNCTION BLOCK USER S GUIDE FX2N-1HC SPECIAL FUNCTI BLOCK USER S GUIE JY99265401B This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX2N-1HC special

More information

IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs

IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs The IO-DI8-TO8 and IO-DI8-TO8-L are I/O expansion modules that can be used in conjunction with specific Unitronics OPLC controllers. The

More information

User safety and equipment protection guidelines

User safety and equipment protection guidelines Snap-in I/O Module The V200-18-E1 plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. The module offers: 3 analog inputs 16 digital

More information

VB -1HC SPECIAL FUNCTION BLOCK USER'S GUIDE

VB -1HC SPECIAL FUNCTION BLOCK USER'S GUIDE VB -1HC SPECIAL FUNCTION BLOCK USER'S GUIDE This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the VB -1HC special function block

More information

Experiment #2 PLC Input Output Wiring Methods. OBJECTIVES After successfully completing this laboratory, you should be able to:

Experiment #2 PLC Input Output Wiring Methods. OBJECTIVES After successfully completing this laboratory, you should be able to: Experiment #2 PLC Input Output Wiring Methods OBJECTIVES After successfully completing this laboratory, you should be able to: Read and explain the nameplate of DELTA s PLC DVP Series Model. Make different

More information

HARDWARE MANUAL GRAPHIC FX-50DU-TK(S)-C UNITS

HARDWARE MANUAL GRAPHIC FX-50DU-TK(S)-C UNITS MELSEC-F HARDWARE MANUAL GRAPHIC FX-50DU-TK(S)-C UNITS Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX-50DU-TK(S)-C

More information

IO-AO6X I/O Expansion Module 6 Isolated Analog Outputs

IO-AO6X I/O Expansion Module 6 Isolated Analog Outputs IO-AO6X I/O Expansion Module 6 Isolated Analog Outputs The IO-AO6X is an I/O Expansion Module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 6 12-bit isolated

More information

HARDWARE MANUAL HCA2 SERIES PROGRAMMABLE CONTROLLERS

HARDWARE MANUAL HCA2 SERIES PROGRAMMABLE CONTROLLERS HARDWARE MANUAL HCA2 SERIES PROGRAMMABLE CONTROLLERS Foreword... 3 1. Introduction... 6 1.1 Model Name... 7 1.2 Rules of Expansion... 7 1.3 Back up Data... 8 1.3.1 EEPROM backup... 8 1.3.2 Capacitor backup...

More information

V E2B Snap-in I/O Module

V E2B Snap-in I/O Module i4 Automation Ltd - 01480 395256 V200-18-E2B Snap-in I/O Module The V200-18-E2B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration.

More information

IO-DI8-RO4, IO-DI8-RO4-L I/O Expansion Modules 8 Inputs, 4 Outputs

IO-DI8-RO4, IO-DI8-RO4-L I/O Expansion Modules 8 Inputs, 4 Outputs IO-DI8-RO4, IO-DI8-RO4-L I/O Expansion Modules 8 Inputs, 4 Outputs The IO-DI8-RO4 and IO-DI8-RO4-L are I/O expansion modules that can be used in conjunction with specific Unitronics OPLC controllers. The

More information

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection Q Series Q Series PB elays Switches & Pilot Lights Display Lights IDE Q relays are low-profile, PB relays that provide quality within a compact package. Size equals value. Q relays are small, yet maintain

More information

Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.

Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks. 9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting

More information

HARDWARE MANUAL FX1S SERIES PROGRAMMABLE CONTROLLERS

HARDWARE MANUAL FX1S SERIES PROGRAMMABLE CONTROLLERS HARDWARE MANUAL FX1S SERIES PROGRAMMABLE CONTROLLERS FX1S Series Programmable Controllers Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation

More information

High Speed Remote I/O Module

High Speed Remote I/O Module High Speed Remote I/O Module EXF-RC15 The Unitronics EXF-RC15 is a High Speed Remote I/O Module that offers three High Speed Counter inputs and four high speed outputs. Overall, the EXF-RC15 offers 9 digital

More information

INSTRUCTION SHEET. Eaton Logic Controller ELCB Controllers

INSTRUCTION SHEET. Eaton Logic Controller ELCB Controllers 2010-12-10 5011699201-PBB1 Eaton Logic Controller ELCB Controllers INSTRUCTION SHEET [Applicable Controllers] ELCB-PB10 ELCB-PB14 ELCB-PB20 ELCB-PB30 ELCB-PB40 IL05001005E 002-1310020-02 Thank you for

More information

IO-DI8-RO8, IO-DI8-RO8-L I/O Expansion Modules 8 Inputs, 8 Outputs

IO-DI8-RO8, IO-DI8-RO8-L I/O Expansion Modules 8 Inputs, 8 Outputs IO-DI8-RO8, IO-DI8-RO8-L I/O Expansion Modules 8 Inputs, 8 Outputs The IO-DI8-RO8 and IO-DI8-RO8-L are I/O expansion modules that can be used in conjunction with specific Unitronics OPLC controllers. The

More information

Expansion Unit Catalog Nos , - 152, - 153, - 154, - 156, -E157

Expansion Unit Catalog Nos , - 152, - 153, - 154, - 156, -E157 PRODUCT DA TA SLC 150 110 Expansion Unit Catalog Nos. 1745-151, - 152, - 153, - 154, - 156, -E157 7 : The EXpdnSiQn Unit The SLC 150 expansion unit can be used with either the SLC 150 processor unit or

More information

IO-PT4. Component identification. User safety and equipment protection guidelines. Unitronics Industrial Automation Systems 1

IO-PT4. Component identification. User safety and equipment protection guidelines. Unitronics Industrial Automation Systems 1 IO-PT4 I/O Expansion Module 4 PT100 Inputs (-50 to 460 C) The IO-PT4 is an I/O expansion module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 4 PT100 inputs

More information

Compact Inductive Proximity Sensor

Compact Inductive Proximity Sensor SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter

More information

V E5B Snap-in I/O Module

V E5B Snap-in I/O Module V200-18-E5B Snap-in I/O Module The V200-18-E5B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 18 isolated digital

More information

FX Special Function Block Compatibility

FX Special Function Block Compatibility C FX Special Block Compatibility FX Special Block Compatibility Special Block Model FX3U FC3UC FX2N FX2NC FX1N FX1S FX3U-4AD-PT-ADP FX3U-4AD-TC-ADP FX3U-4AD (*5) FX3U-4AD-ADP (*5) Analog Input FX2N-2AD

More information

FX2NC-ENET-ADP Ethernet adapter USER'S MANUAL

FX2NC-ENET-ADP Ethernet adapter USER'S MANUAL Y1 Y0 Y2 2NC POWER LINK ACT SD RD - Ethernet adapter USER'S MANUAL Manual Number JY997D12301 Revision D Date May 2007 This manual contains text, diagrams and explanations which guide the reader in the

More information

DSS/DS HARDWARE MANUAL FX2NC (DSS/DS) SERIES PROGRAMMABLE CONTROLLERS. Санкт-Петербург, ул. Седова

DSS/DS HARDWARE MANUAL FX2NC (DSS/DS) SERIES PROGRAMMABLE CONTROLLERS. Санкт-Петербург, ул. Седова DSS/DS HARDWARE MANUAL FX2NC (DSS/DS) SERIES PROGRAMMABLE CONTROLLERS Санкт-Петербург, ул. Седова info@elinc.ru +7 (812) 7-02 www.e FX2NC Series Programmable Controllers Foreword This manual contains text,

More information

1) Indicates that the identified danger WILL cause physical and property damage.

1) Indicates that the identified danger WILL cause physical and property damage. CC-Link Ver.1.10 FX2N-16CCL-M CC-Link SYSTEM MASTER BLOCK HARDWARE MANUAL JY992D93201D This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation

More information

USER S MANUAL. FX2N-5A Special function block

USER S MANUAL. FX2N-5A Special function block USER S MANUAL FX2N-5A Special function block FX2N-5A Special function block Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation

More information

FX-10GM POSITIONING CONTROLLER USER'S GUIDE

FX-10GM POSITIONING CONTROLLER USER'S GUIDE FX-10GM POSITIONING CONTROLLER USER'S GUIDE Manual number: JY992D68401 Manual revision: A Date: September 1997 Foreword This manual only describes the specifications for FX-10GM positioning controller.

More information

LOGIC CONTROLLER INSTALLATION MANUAL NTR 756 B /E

LOGIC CONTROLLER INSTALLATION MANUAL NTR 756 B /E LOGIC CONTROLLER INSTALLATION MANUAL NTR 756 B /E Table of contents 1. INTRODUCTION...1 2. HARDWARE DESCRIPTION...2 3. INSTALLATION...6 4. CONNECTION...8 5. USER SAFETY AND PROTECTION OF THE EQUIPMENT...11

More information

General Specifications

General Specifications General Specifications Digital I/O Modules (for FIO) GS 32Q06K40-31E GENERAL This GS provides the hardware specifications of the digital I/O modules that can be installed in the Safety Node Unit and Safety

More information

GX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available

GX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available 8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming

More information

Model Number Structure

Model Number Structure Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously

More information

EX-RC1 Remote I/O Adapter

EX-RC1 Remote I/O Adapter EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter

More information

EZ-ZONE. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy

EZ-ZONE. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy EZ-ZONE ST EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy Watlow s new EZ-ZONE ST integrated control loop solid state controller offers complete thermal system

More information

INSTRUCTION SHEET. Eaton Logic Controller ELCM Controllers

INSTRUCTION SHEET. Eaton Logic Controller ELCM Controllers 2010-12-10 5011698901-PHA1 Eaton Logic Controller ELCM Controllers INSTRUCTION SHEET [Applicable Controllers] ELCM-PH16NNDR ELCM-PH16NNDT ELCM-PH24NNDR ELCM-PH24NNDT ELCM-PH32NNDR ELCM-PH32NNDT ELCM-PH40NNDR

More information

Guidelines for the Safety of the User and Protection of the F940WGOT Series.

Guidelines for the Safety of the User and Protection of the F940WGOT Series. F940WGOT Series (F940WGOT-TWD) Installation Manual JY992D93901E This manual contains text, diagrams and explanations which will guide the reader in the correct installation, safe use and operation of the

More information

Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global

Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global 8 PHOTO PHOTO MEASURE Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F- Glossary of terms... P.576~ panasonic.net/id/pidsx/global guide... P.78~ General

More information

IO-DI16, IO-DI16-L I/O Expansion Modules

IO-DI16, IO-DI16-L I/O Expansion Modules IO-DI16, IO-DI16-L I/O Expansion Modules 16 Digital Inputs The IO-DI16 and IO-DI16-L are I/O expansion modules that can be used in conjunction with specific Unitronics OLC controllers. The modules are

More information

GX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.

GX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space. DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of

More information

This manual classifies the safety precautions into two categories: and.

This manual classifies the safety precautions into two categories: and. FX2N-20GM USER S GUIDE JY992D77601G This manual only describes the specifications for FX2N-20GM positioning controller. For complete operation, wiring, mounting and programming instructions please refer

More information

Product Information SIMATIC S Digital Output Module SM 322; DO 16 UC24/48 V

Product Information SIMATIC S Digital Output Module SM 322; DO 16 UC24/48 V Product Information SIMATIC S7-300 Digital Output Module SM 322; DO 16 UC24/48 V X 2 as of Version 3 4 New Digital Output Module Available The S7-300 Digital Output Module SM 322; DO 16 UC24/48 V has been

More information

PACSystems RX3i and Series IC694MDL916 and IC693MDL916 Output Module, Isolated Relay, N.O., 4 Amp, 16 Point

PACSystems RX3i and Series IC694MDL916 and IC693MDL916 Output Module, Isolated Relay, N.O., 4 Amp, 16 Point January 2010 PACSystems RX3i and Series 90-30 IC694MDL916 and IC693MDL916 Output Module, Isolated Relay, N.O., 4 Amp, 16 Point 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 TB IC694MDL916 Q1 Q2 Q3 Q4 Q5 Q6 Q7

More information

KCH-B KCH-B. Merits. Application examples. Counters for Display of High-speed Addition and Subtraction. Counters. switches to write settings

KCH-B KCH-B. Merits. Application examples. Counters for Display of High-speed Addition and Subtraction. Counters. switches to write settings for Display of High-speed Addition and Subtraction Maximum operating speed 2kHz Used in industrial machinery, end-measuring devices, and the like, this electronic counter is exclusively for display. It

More information

Optimum sensing capability for LCD manufacturing

Optimum sensing capability for LCD manufacturing SENSORS FOR Glass Substrate Detection Sensor Amplifier-separated FX-301-F FT-F9 FD-F7 EX-F70/F60 HD-T1 M FD-L3 Reliable detection of glass substrates Its unique optical system enables detection of transparent

More information

VS-P Series. TDK-Lambda INSTRUCTION MANUAL

VS-P Series. TDK-Lambda INSTRUCTION MANUAL VS5P /75P /1P/ 15P Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the

More information

output devices. connected to the controller. data communications link. relay systems. user program. MECH1500Quiz1ReviewVersion2 Name: Class: Date:

output devices. connected to the controller. data communications link. relay systems. user program. MECH1500Quiz1ReviewVersion2 Name: Class: Date: Class: Date: MECH1500Quiz1ReviewVersion2 True/False Indicate whether the statement is true or false. 1. The number and type of I/Os cannot be changed in a fixed PLC. 2. In a PLC system, there is a physical

More information

MELSEC iq-f Series CPU Module

MELSEC iq-f Series CPU Module MELSEC iq-f Series CPU iq-f Series The iq-f Series is a completely new controller with an elegant design that does not waver from the familiar look-and-feel of Mitsubishi Electric s compact controllers.

More information

DC 2-wire Cylindrical Inductive Proximity Sensor

DC 2-wire Cylindrical Inductive Proximity Sensor SERIES DC -wire Cylindrical Inductive Proximity -wire type available Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance & ease of use G-8/8U GA-/GH GX GX-N G-8H/8H G-N Robust

More information

EZ-ZONE. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy

EZ-ZONE. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy EZ-ZONE ST EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy The new EZ-ZONE ST integrated control loop solid state controller from Watlow offers complete thermal

More information

V E62B Snap-in I/O Module

V E62B Snap-in I/O Module V200-18-E62B Snap-in I/O Module The V200-18-E62B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 30 isolated digital

More information

Industrial Control Relays Relays and terminal module RS type

Industrial Control Relays Relays and terminal module RS type Relaysandterminal module Relays-and-terminal module RS, N A very compact, space-saving terminal module containing four or six relays with one NO contact. Features The RS series relays-and-terminal module

More information

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02-0AA0) Preface. Properties 2. Diagnostics 3.

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02-0AA0) Preface. Properties 2. Diagnostics 3. Preface 1 Properties 2 SIMATIC Diagnostics 3 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02- Manual 01/2008 A5E01254028-01 Safety Guidelines This manual contains notices

More information

EE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety

EE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety Compact for High-Density Mounting with Easy Snap-In Connector H Connector features a built-in safety lock for shock and vibration resistance H replacement made simple without rewiring H Cables can be bent

More information

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01-0AA0) Preface. Properties 1. Diagnostics 2.

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01-0AA0) Preface. Properties 1. Diagnostics 2. SIMATIC ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01- SIMATIC Preface Properties 1 Diagnostics 2 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A

More information

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED

More information

Reversible motor driver

Reversible motor driver Reversible motor driver The BA6289F and BA6417F are reversible-motor drivers, with an output current of 600mA for the former and 1A for the latter. Two logic inputs allow four output modes: forward, reverse,

More information

Operating instructions. Switching amplifier DN0210 DN / / 2015

Operating instructions. Switching amplifier DN0210 DN / / 2015 Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5

More information

Making Hazardous Operations Safe and Productive

Making Hazardous Operations Safe and Productive NEW Safety Guard Switching Unit G9SX-GS Making Hazardous Operations Safe and Productive Making Hazardous Operations Safe and Productive This new addition to the model of Flexible Safety Unit G9SX series

More information

Solid State Relays with Failure Detection Function

Solid State Relays with Failure Detection Function Solid State Relays with Failure Detection Function CSM DS_E_2_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously outputs

More information

Model Number Structure

Model Number Structure Solid State Relays with Failure Detection Function Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal.

More information

Description. Green. Red. Orange

Description. Green. Red. Orange GP3000 Series DIO Interface Installation Guide Caution Be sure to read the Warning/Caution Information on the attached sheet before using the product. CAUTION This manual describes the part names and general

More information

Extension module for lighting control

Extension module for lighting control s 3 842 DESIGO RXC Extension module for lighting control Extension to the RXC30 / RXC31 / RXC38 room controller RXC40.1 RXC40.5 The RXC40 extension module is used in conjunction with an RXC30, RXC31 or

More information

EH21 DVP

EH21 DVP 2009-06-15 5011668901-EH21 DVP-1070030-02 ENGLISH This Instruction Sheet only provides descriptions for electrical specifications, general specifications, installation & wiring. Other detail infromation

More information

PRODUCT SPECIFICATION. PC Board Relays. Series.

PRODUCT SPECIFICATION. PC Board Relays. Series. PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7

More information

HARDWARE MANUAL FX1S SERIES PROGRAMMABLE CONTROLLERS

HARDWARE MANUAL FX1S SERIES PROGRAMMABLE CONTROLLERS HARDWARE MANUAL FX1S SERIES PROGRAMMABLE CONTROLLERS FX1S Series Programmable Controllers Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation

More information

G9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function

G9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function Safety Guard Switching Unit CSM DS_E_6_1 A Safety Measure for Hazardous Operations That Does Not Lower Productivity Two functions support two types of application: Auto switching: For applications where

More information

Bulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection

Bulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input

More information

Ultra Slim Relays 24

Ultra Slim Relays 24 Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Wide Modules Installation Guide UID-W1616R, UID-W1616T Uni-I/O Wide is a family of Input/Output modules that are compatible with the UniStream control platform. Wide Modules are 1.5 times as wide

More information

Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.

Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. I/O Block Base G7A Reduces Wiring while Providing I/O Flexibility Mount I/O relays and I/O SSRs freely. Electric-shock preventive (finger-touch protection) terminal block incorporated conforming to VDE

More information

V E4XB Snap-in I/O Module

V E4XB Snap-in I/O Module Cara Bereck Levy V200-18-E4XB Snap-in I/O Module The V200-18-E4XB plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features

More information

WARNING 25.2 POWER L.V X1 X2 Y0 C1 Y1 C2 Y2 C3 Y3 ELC-EX NN. 3. Extension unit clip 4. Input/output terminal

WARNING 25.2 POWER L.V X1 X2 Y0 C1 Y1 C2 Y2 C3 Y3 ELC-EX NN. 3. Extension unit clip 4. Input/output terminal POWER L.V 006--7 506000-E ELC-ENNDR/T ELC-E6NNDR/T ELC-ENNDN ELC-ENNAN ELC-ENNNR/T ELC-E6NNNI Instruction Sheet Digital Input Digital Output Module WARNING This Instruction Sheet provides descriptions

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor

More information

MDK. Accelnet Module DevKit. Provides Mounting & Connections for Accelnet CANopen Servoamplifiers FEATURES

MDK. Accelnet Module DevKit. Provides Mounting & Connections for Accelnet CANopen Servoamplifiers FEATURES Provides Mounting & Connections for Accelnet CANopen Servoamplifiers FEATURES Works with all Accelnet Models Develop & Debug Accelnet projects then transfer design to oem pc board. Dev Kit Model * Vdc

More information

IO-LC1, IO-LC3 I/O Expansion Modules 1-3 Loadcell Inputs, 1 Digital In, 2 Out

IO-LC1, IO-LC3 I/O Expansion Modules 1-3 Loadcell Inputs, 1 Digital In, 2 Out IO-LC1, IO-LC3 I/O Expansion Modules 1-3 Loadcell Inputs, 1 Digital In, 2 Out The IO-LC1 and IO-LC3 are I/O Expansion Modules that can be used in conjunction with specific Unitronics OPLC controllers.

More information

panasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes.

panasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes. 1123 PHOTO PHOTO PARTICUR Type Edge Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.1593~ guide... P.1021~ General precautions... P.1595 Conforming to FDA regulations

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.

More information

EX-RC1 Remote I/O Adapter

EX-RC1 Remote I/O Adapter EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter

More information

The diagram below shows how cables and I/O modules are connected to form a plug-and-go system.

The diagram below shows how cables and I/O modules are connected to form a plug-and-go system. CompoBus/S IP67 I/O Modules Waterproof input and output blocks make wiring a snap and replacement of sensors or actuators a quick twist of a connector. These IP67 rated blocks are perfect for plug-and-go

More information

Tempco Instruction Manual

Tempco Instruction Manual Tempco Instruction Manual 1/16 DIN Solid State Temperature Controller Relay Output Solid State Output For Heating Model Numbers: TEC-901, TEC-902, TEC-905 Temperature controls in this series are designed

More information

DC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range

DC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price G-8/8U GA-/GH GX GX-U/FU

More information

Operation Manual. Fieldbus system EX510-GPR1. PROFIBUS DP Compatible GW unit

Operation Manual. Fieldbus system EX510-GPR1. PROFIBUS DP Compatible GW unit Fieldbus system PROFIBUS DP Compatible GW unit Operation Manual EX50-GPR URL http://www.smcworld.com Akihabara UDX 5F, --, Sotokanda, Chiyoda-ku, Tokyo 0-00, JAPAN Phone: +8 3-507-89 Fax: +8 3-598-536

More information

VMIVME bit High-Voltage Digital Output Board with Built-in-Test FUNCTIONAL CHARACTERISTICS

VMIVME bit High-Voltage Digital Output Board with Built-in-Test FUNCTIONAL CHARACTERISTICS 128 bits of high-voltage outputs High-current drivers (600 ma sink) Automatic surge current shutdown protection Thermal shutdown protection High breakdown voltage (55 V) Output clamp diodes for inductive

More information

OPERATION NANUAL E-20TP TEACHING PANEL

OPERATION NANUAL E-20TP TEACHING PANEL POSITIONING CONTROLLERS OPERATION NANUAL E-20TP TEACHING PANEL FX/E Series Positioning Controllers E-20TP Teaching Panel Operation Manual Manual number: JY992D44901B Manual revision: B Date: December

More information

T100MD PLC Installation Guide

T100MD PLC Installation Guide T100MD-2424+ PLC Installation Guide LCD Display Module MCR 12 to 24V DC Power Supply for PLC Master Control Relay for Output. + - EEPROM Write-Protection when J2 at WP 14-pin LCD Display Port Two-wire

More information