User's Guide Ergotron LX
|
|
- Bethanie Cummings
- 5 years ago
- Views:
Transcription
1 User's Guide Ergotron LX USA Europe A B C D E F mm #8-32 M4 x 10mm M4 x 10mm 3/32" 2 2x 7/16" For optimum ergonomic viewing, set top of monitor screen 1 below eye height of operator. 3 2x 4mm 2.5mm x 1/2 1/8" 1 Determine placement of base on work surface. Straight Configuration Corner Configuration - position base minimum 19" (483mm) from either edge 1 of 10
2 2 Choose clamp mount or grommet mount style: Clamp Mount 1/2" - 1-7/8" mm 7/16" Grommet Mount a b c d 7/16" e up to 2.5" 64 mm f 2 of 10
3 3 Mount monitor to arm (75mm x 75mm or 100mm x 100mm) If your monitor uses a screw size other than M4 x 10mm, DO NOT use the M4 x 10mm screws or knob provided as they could result in damage to the monitor. 75 x 75mm 100 x 100mm a M10mm M10mm #8-32 3/32" b M4 x 10 mm M4 x 10 mm T T 3 of 10
4 4 Mount arm to plole. With Extension Without Extension 4 of 10
5 5 Route Cable. Leave enough slack in cable to pivot arm and monitor 5 of 10
6 6 Position arm on pole for ergonomic viewing. For optimum ergonomic viewing set top of monitor screen 1" below eye height. With Extension Without Extension The Ergotron LX Monitor Arm can be positioned to accomodate many applications including bifocal use and tablet PC attachment. Adjust postition of arm on pole to provide optimum viewing for your individual situation. Bifocal Tablet PC 2.5mm For optimum ergonomic viewing, set top of monitor screen 1 below eye height of operator. Position this label on your monitor bezel With monitor and arm properly supported, loosen screw and adjust up or down to desired height. Retighten to secure arm to pole. 6 of 10
7 7 Range of Motion The Ergotron LX Monitor Arm is designed to adjust quickly and easily according to your needs - refer to following steps for adjustment and page 8 for Ergonomic Ground Rules. Lift - Up & Down Tilt - Back & Forth Pan/Arm Swing - Side-to-side 75 Rotate - P/L (Portrait/Landscape) ±50 up to " (330 mm) 5 8 Lift Motion Move monitor up and down through entire range of motion. If it does not stay in place at any point it will need adjustment - see below. Adjust so upward and downward moving forces are equal. Once this is achieved turn adjustment screw 2-4 turns clockwise to give slight upward bias to lift system. 13" (330 mm) ±50 Adjust Lift To Increase Lifting Force: Turn screw clockwise. To Decrease Lifting Force: Turn screw counterclockwise. 4mm! CAUTION DO NOT overtighten fasteners. Overtightening may cause damage to your equipment. 7 of 10
8 9 Tilt Motion Tilt monitor back and forth through entire pivot range of motion. If it does not stay in place or movement in one direction is stiff, pivot needs adjustment - see below. Adjust until monitor 75 stays in place and tilting forces, up or down, are equal. Adjust Tilt To Increase Tilt Lifting Force: Turn screw clockwise. To Decrease Tilt Lifting Force: Turn screw counterclockwise. 5! CAUTION Never remove this adjustment screw! Removing adjustment screw will cause damage to the arm and possible damage to equipment. 10 Arm Swing Swing arms from side-to-side at both pivot points through entire range of motion. If it does not stay in place or movement in one direction is stiff, tension needs adjustment - see below. Adjust until arms stay in place and tension, side-to-side, is equal. Adjust Arm Swing 2.5mm To Increase Tension: Turn screw clockwise. To Decrease Tension: Turn screw counterclockwise. 8 of 10
9 Ergonomic Ground Rules The Ergotron LX Arm is designed to meet the eye height difference for the 5% - 95% female to male population in either a sitting or standing work environment. Screen Height The recommended screen height for displays (except in special circumstances such as bifocal use) is that the top of the display screen should be set at or slightly below (approximately 25 mm [1 ]) the eye height of the user when the user is sitting or standing in a comfortable, relaxed position. This will place the center of the screen at the ideal 15 to 20 below eye height for most desktop displays. The screen height should be easily adjustable to accommodate gender height differences and the operator s personal preferences throughout the day. Further, the viewing height should allow the operator to view the display screen within an orthopedically correct viewing cone to minimize musculoskeletal stress disorders (MSD s). Screen Tilt Ideally an upward tilt with the bottom of the screen tilted toward the operator provides optimum viewing because it provides a consistent focal length when scanning from the top of the screen to the bottom. A tilt range of -5 to +30 is usually adequate depend ing upon the size of the display. Note: When upward tilt is used, special care must be taken to minimize screen glare. Screen Distance from Operator Normally the display screen should be placed as far away as possible from the operator, consistent with the ability to read the information presented on the screen. (The normal focal length for most people exceeds 762 mm (30 ) or greater, however, from a practical standpoint a recommended viewing distance from 457 mm (18 ) to 710 mm (28 ) is mentioned by several ergonomic standards.) A good rule of thumb for most installations is that the display screen should be placed at arms length, with the ability to move the display back and forth to suit individual needs being the ideal. Vertical adjustments should not result in a change in focal length. Screen Adjustment Forces The moving force to make any adjustment to the display, vertical position, tilt, pan or portrait/landscape rotation should not exceed 2.32 kg (5.1 lbs). Keyboard Height/Positioning Keyboards should be placed at a height that allows the operator to operate the keyboard with the forearms level and hands sloping slightly downward. A negatively tilting keyboard, allowing the operator to keep the wrinkles out of the top of the wrists is ideal. Fore and aft positioning of the keyboard should be consistent with allowing the hands to move easily over the keyboard with forearms level and elbows at the sides, maintaining a angle between upper and lower arms. If the top of the display screen is set 25 mm (1 ) below the operator s eye height as recommended, then the central row of the keyboard should be positioned 50.8 cm (20 ) below the top of the display screen for the average range of users. 5% Female Average Female Average Person 50% of Population 95% of Population Average Male 95% Male 9 of 10
10 ? Troubleshooting Lift - Up & Down Tilt - Back & Forth Arm Swing - Side-to-side 75 ±50 13" (330 mm) 5 Symptom Probable Cause Solution Monitor lifts up and down too easily or with difficulty. Lifting force needs adjustment. 8 Lift Motion Monitor exceeds weight capacity*. 7 USA Europe Monitor tilts back and forth too easily or with difficulty. Tilt lifting force needs adjustment. 9 Tilt Motion 8 Arm swings from side-to-side too easily or with difficulty. Side-to-side tension needs adustment. 10 Arm Swing 8 *Weight Capacity: 5-20 lbs. ( kg) Ergotron, Inc. All rights reserved. 10 of 10 Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc. Reproduction of this material in whole or part for any purpose other than that authorized by Ergotron, Inc. is prohibited.
Sit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
More informationSet up dual monitors, side by side or stacked
Dual-Monitor Arm - One-Touch Height Adjustment - Stackable StarTech ID: ARMDUAL30 The ARMDUAL30 Dual-Monitor Arm lets you customize your workspace like never before. Increase your comfort and productivity
More informationDesk-Mount Dual Monitor Arm - Full Motion - Articulating - Stackable - Tool-less Assembly
Desk-Mount Dual Monitor Arm - Full Motion - Articulating - Stackable - Tool-less Assembly Product ID: ARMDUAL30 The ARMDUAL30 Dual-Monitor Arm lets you customize your workspace like never before. Increase
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationDual Monitor Sit-to-stand Workstation
Dual Monitor Sit-to-stand Workstation Product ID: BNDSTSDUAL This dual-monitor sit-to-stand workstation lets you enhance your productivity and comfort, by giving you a dual-display work space that s easy
More informationDUAL-ARM MONITOR MOUNT For in. ( cm) desktop computer monitors
LeviTouch DM-502 DUAL-ARM MONITOR MOUNT For 15 27 in. (38.1 68.6 cm) desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor Dual-Arm Desktop Mount can securely support two monitors
More informationGo from sit to stand, with one touch. Dual Monitor Sit-to-stand Workstation. StarTech ID: BNDSTSDUAL
Dual Monitor Sit-to-stand Workstation StarTech ID: BNDSTSDUAL This dual-monitor sit-to-stand workstation lets you enhance your productivity and comfort, by giving you a dualdisplay work space that s easy
More informationCreate a more ergonomic dual-monitor setup
Dual Monitor Mount with Built-in 2-port USB and Audio Pass-Through StarTech ID: ARMSLIMDUO Enhance productivity and free up valuable space with the ARMSLIMDUO dual-monitor mount. Two independent arms make
More informationHermanMiller Altissimo Sit-Stand Workstation
HermanMiller Altissimo Sit-Stand Workstation Altissimo Sit-Stand Launch Announcement Herman Miller is pleased to announce the availability of the Altissimo Sit-Stand Workstation through Options, which
More informationDesk-Mount Dual Monitor Arm - Full Motion - Articulating
Desk-Mount Dual Monitor Arm - Full Motion - Articulating Product ID: ARMSLIMDUO Enhance productivity and free up valuable space with the ARMSLIMDUO Dual-Monitor Arm. Two independent arms make it easy to
More informationMONITOR MOUNTS. Monitor Mounts OVERVIEW
MONITOR MOUNTS Monitor mounts can be used with either fixed height or adjustable height workcenters and are an excellent way to achieve the optimal level of adjustability recommended by ergonomists. When
More informationArticulating TV/Monitor Clamp/Grommet Desk Mount Model: DE640S (Hydro Series)
Articulating TV/Monitor Clamp/Grommet Desk Mount Model: DE640S (Hydro Series) Instruction Manual Images may be different from actual product Disclaimer It is Dyconn s intention to have all the correct
More informationApplications : LA-51-1 LA-52-1 LA-51-2 LA Features : LA-51-3 LA-52-3 LCD SUPPORTER KEYBOARD ARM
Applications : It goes well with partition boards and tracks in an office, or Medicine table at a dentist, or Medical equipment at a clinic or mobile cart, or Industrial machinery or monitor system at
More informationMD-BSL15W / SPRING-LOADED TWIN-ARM. For ( cm) LCD desktop computer. User Manual
MD-BSL15W / SPRING-LOADED TWIN-ARM MONITOR mount For 15 27 (38.1 68.6 cm) LCD desktop computer User Manual Thank you for choosing Gabor. The Gabor MD-BSL15W mounts two 15 27 (38.1 68.6 cm) LCD computer
More informationQuick Installation Guide
Full Motion Single Monitor Arm, Pole Mount Quick Installation Guide Please Review the entire Quick Installation Guide prior to installation. If you have any questions regarding the compatibility of this
More informationGH-50. Gimbal Head. You re on steady ground
GH-50 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-50 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. Ideal
More informationQuick Installation Guide
Full Motion Dual Monitor Arm, Pole Mount Quick Installation Guide Please Review the entire Quick Installation Guide prior to installation. If you have any questions regarding the compatibility of this
More informationQuick Installation Guide
Full Motion Dual Monitor Arm, Pole Mount Quick Installation Guide Please Review the entire Quick Installation Guide prior to installation. If you have any questions regarding the compatibility of this
More informationWall-Mounted Sit-Stand Desk - Single Monitor
Wall-Mounted Sit-Stand Desk - Single Monitor Product ID: WALLSTS1 This wall-mounted sit-stand desk is perfect for areas that don t have enough space for a traditional sitstand desk. Its compact, wall-mounted
More information35 years of workspace wellbeing & productivity
35 years of workspace wellbeing & productivity Ergotron has been improving the human interface with digital displays in the corporate office market for over three decades. Our history of innovation is
More informationSit-to-Stand Workstation
Sit-to-Stand Workstation Product ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
More informationGo from sit to stand, with one touch
Sit-to-Stand Workstation StarTech ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
More informationCOMPUTER WORKSTATION CHECKLIST
COMPUTER WORKSTATION CHECKLIST COMPUTER WORKSTATION CHECKLIST This checklist can help you create a safe and comfortable computer workstation. You can also use it in conjunction with the Purchasing Guide
More informationDual Gas Spring Desktop Mount
Mounts With functionality, flexibility, and ease of installation at top of mind, V7 mounts are designed with high grade durable materials that compliment the connected displays. Rigorous fatigue, load,
More informationDESK MOUNT CATALOGUE SHOP AT DURONIC.COM
DESK MOUNT CATALOGUE 2016 SHOP AT DURONIC.COM 1 INFORMATION At Duronic, we have an extensive list of Monitor Arms which cater for different individual preferences. The Monitor Arms are ergonomically designed
More informationMobile Office System
Mobile Office System Sit Stand Car Desk User Guide The Sit Stand Car Desk turns the rear seat of virtually any four door vehicle into a comfortable working environment. The system is designed to safely
More informationTriple-Monitor Arm. Greater comfort and productivity Product ID: ARMTRIO
Triple-Monitor Arm Product ID: ARMTRIO Create the ultimate ergonomic comfort while freeing up valuable desk space with this triple-monitor arm. You can set up three computer monitors (each up to 24 ) and
More informationMonitor Mount with Articulating Arm and Laptop Riser
Monitor Mount with Articulating Arm and Laptop Riser ARMUNONB *actual product may vary from photos FR: Guide de l utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario
More informationTV & Office Solutions by equip solutions with a high value of benefit
TV & Office Solutions by equip solutions with a high value of benefit The brand equip stands for a product development driven by quality management and continuous adjustments to the requirements of the
More informationSTYLE WITH STRENGTH AND FLEXIBILITY. MONITOR MOUNTS
STYLE WITH STRENGTH AND FLEXIBILITY. MONITOR MOUNTS K 1 Models MONITOR MOUNTS Kontour Series K1 monitor mounts create flexible, functional workspaces in a wide variety of settings. The ergonomic designs
More informationUniversal Tablet Holder
Universal Tablet Holder 1 Thank you for choosing Auray. The Auray Universal Tablet Holder mounts your tablet onto a microphone stand s shaft or threaded mount for hands-free viewing while onstage or in
More informationTV Brackets by equip The perfect solution to securely mount your TV
TV Brackets by equip The perfect solution to securely mount your TV No matter what s the size, if you want your TV in a fix position or want it to tilt, we have the solution you re been looking for. intro
More informationMD-BD13B / DUAL SEGMENT TWIN-ARM. For (33-69 cm) LCD desktop computer monitors. User Manual
MD-BD13B / DUAL SEGMENT TWIN-ARM MONITOR mount For 13 27 (33-69 cm) LCD desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor MD-BD13B mounts two 13 27 (33 69 cm) LCD computer monitors
More informationPossible solutions, (depending on further analysis)
Below is one that has been successful in helping people "sharpen their eyes" in looking for risk factors. Possible solutions to each problem are also listed. And (surprise!) there are almost always SEVERAL
More informationCLIMB2 DUAL MONITOR SIT/STAND WORKSTATION
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationDual TV/Monitor Desk Mount Stand (Duplex Series) Model: DE9E2S-S
Dual TV/Monitor Desk Mount Stand (Duplex Series) Model: DE9E2S-S Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information represented
More information2013 Ergotron Coming Soon Updated
2013 Ergotron Coming Soon Updated 05-24-13 This is Ergotron proprietary information and may be shared with customers DO NOT provide hard or electronic copies externally. WorkFit-A Drop Down KB Tray On-demand
More informationComparison of Postures from Pen and Mouse Use
Global Ergonomic Technologies P.O. Box 2667 Guerneville, CA 95446 - U.S.A. Phone: (77) 869-194 Fax: (77) 869-1956 Comparison of Postures from Pen and Mouse Use June 8, 1998 Introduction There are a variety
More informationOwner s Manual Havis Universal Tablet Cradle
Owner s Manual Havis Universal Tablet Cradle Related Products Havis offers a wide variety of accessory products for use with the UT-301 Universal Tablet Cradle. For more information or to order, please
More informationMONITOR SOLUTIONS. chiefmfg.com. end-user focused faster installation superior service proven quality
MONITOR SOLUTIONS 2009 chiefmfg.com end-user focused faster installation superior service proven quality CHIEF MOUNTING SOLUTIONS FEATURES Advanced Display Key hole pattern makes mounting the screen quick
More informationERGONOMIC WORKSTATION SET-UP CHECKLIST
Work Health and Safety System ERGONOMIC WORKSTATION SET-UP CHECKLIST Employee: Position: Site: Assessed by: Signature: When conducting assessments, refer to Workstation Setup diagram as a guide on page
More information2 x Dynamic Arms on 135 Post with C-Clamp
Installation Guide AWMS-2-D13-C 2 x Dynamic Arms on 135 Post with C-Clamp COMPONENT CHECKLIST RANGE A AWM-LC Post Clamp B AWM-AD Dynamic Arm (x2) C AWM-P13 135 Post D AWM-FC C-Clamp CONTENTS C-Clamp Page
More informationChange the way you view the world
Volume 3, Number 2: Global (English) Change the way you view the world Mounting solutions for large and small displays, notebooks and tablet PCs More motion. Less effort. Feel the difference. Patented
More informationTIER 1 DEPARTMENTAL COMPUTER WORKSTATION EVALUATION FORM UC-DAVIS OCCUPTIONAL HEALTH SERVICES, ERGONOMICS PROGRAM Tel: (530)
TIER 1 DEPARTMENTAL COMPUTER WORKSTATION EVALUATION FORM UC-DAVIS OCCUPTIONAL HEALTH SERVICES, ERGONOMICS PROGRAM Tel: (530) 752-6079 Revised 12/8/2003 EMPLOYEE INFORMATION Employee Name Phone Date Dept
More informationPFPDARM3 Product Illustration
PFPDARM3 Product Illustration page 1 of 15 PFPDARM3 Components & Fasteners 1x 1x 4x 4x 8x 4x 1 each TOOLS REQUIRED Phillips Screwdriver 1/2" Wrench 1/2" Socket Wrench 3/32" (2.38mm) 3/16" (4.76mm) 1/8"
More informationAVT Model Tripod.
AVT Model Tripod www.ravelliphoto.com Product Overview: The Ravelli AVT professional tripod is a high performance, fluid drag tripod that provides smooth continuous drag control and operates on both pan
More informationEaton s Aware Console System
Technical sheets Eaton s Aware Console System Dynamic Height-Adjustable Column-Mount Monitor Arm The KONWLK1B Dynamic Arm is easily positioned for optimal user ergonomics. With the advanced column system,
More informationIt s a fact... You should know what you can do to solve your computer-related discomfort.
MARCH 2002 DoD Ergonomics Working Group It s a fact... You should know what you can do to solve your computer-related discomfort. I bend my fingers or thumbs backward. I use one finger to operate my input
More informationComputer Workstation Self-Assessment Checklist
Safe Hands The following checklist is provided to assist you with setting up and assessing your own workstation ergonomics. Once you have completed the self assessment checklist, record any problems identified,
More informationErgotron. WorkFit-A Sit-Stand Workstation. The platform for balance and productivity. Highlights
Product Sheet Ergotron WorkFit-A Sit-Stand Workstation Highlights For Computer Users For IT and Facilities Staff For HR/Risk Management and Company Cost Savings The platform for balance and productivity
More informationIntroduction. Features and Highlights
Introduction The Nodal Ninja Ultimate M2 Giga (M2G) manual pano head is an ideal solution for capturing high resolution Gigapixel or mosaic type imagery. The M2G will accommodate telephoto lenses up to
More informationContents. QuickStart Guide. p/n LIT
Contents QuickStart Guide p/n LIT-804000 Camera mounting plate loose Co-Pilot 3.5 monitor and AA battery pack All four screws must be loose to free the camera mounting plate. tight Make sure to tighten
More informationTABLE OF CONTENTS Workstation Bulletins
TABLE OF CONTENTS Workstation Bulletins Ideal Work Practices 1 Adjusting the Office Chair 2 Keyboard and Mouse Bulletin 3 Monitor and Document Holders 4 Positioning to Decrease Reach 5 Telephone Bulletin
More informationORDER GUIDE POLE MOUNTS. FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s
ORDER GUIDE POLE MOUNTS FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s Configurations POLE MOUNT SERIES #60250 mobile cart Pole mount LCD/KB holder Pole mount multiple LCD Pole mount CPU holder #60251 mobile
More informationwith External Springs
Two-Section Broadcast Arm with External Springs Owner s Manual Introduction Thank you for choosing the Auray two-section broadcast arm with external springs. This versatile and sturdy broadcast arm is
More informationORDER GUIDE POLE MOUNTS. FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s
ORDER GUIDE POLE MOUNTS FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s Configurations POLE MOUNT SERIES #60250 mobile cart Pole mount LCD/KB holder Pole mount CPU holder #60251 mobile cart page2of9 Configurations
More informationFLEXIBLE MOUNTING SOLUTIONS POINT-OF-SALE FOOD SERVICE HOSPITALITY
FLEXIBLE MOUNTING SOLUTIONS POINT-OF-SALE FOOD SERVICE HOSPITALITY VOLUME 1 Place your technology exactly where you need it. Monitors, kiosks and payment terminals can quickly be placed in user-convenient
More informationPD Way Pan/Tilt Head. You re on steady ground
PD-117 3-Way Pan/Tilt Head You re on steady ground 1 Introduction Thank You for choosing Oben! This sturdy Oben PD-117 3-Way Pan and Tilt Head offers precise, smooth operation, with independent control
More informationData Centre Peripherals
Data Centre Peripherals Computer Crash Carts EDP Crash Cart Features: A lightweight mobile computer crash cart that can be used almost anywhere. Height adjustable and can accommodate both seated and standing
More informationEDUCATION & TRAINING. Engaged in Teaching & Learning MANUFACTURED IN THE USA
EDUCATION & TRAINING Engaged in Teaching & Learning MANUFACTURED IN THE USA EDUCATION & TRAINING Adjustable welded frame tables give the tools and flexibility to create ideal layouts for any need Adjustable
More informationIEI Quick Mounting Technology
IEI Quick Technology 00mm 7mm Compliant with Standards IEI panel solutions has four mounting holes compliant with the (Video Electronics Standards Association) mounting standard (7mm x 7mm/00mm x 00mm)
More informationCONFERENCE ROOMS. Furniture that facilitates collaboration MANUFACTURED IN THE USA
CONFERENCE ROOMS Furniture that facilitates collaboration MANUFACTURED IN THE USA CONFERENCE ROOMS Make an impactful impression Beautiful wood tables tailored to your company s needs for functionality
More informationDisplay Screen Equipment
Display Screen Equipment 1. Does the screen give a clear, sharp and steady image? 1(a) Clean the screen if necessary. 1(b) If the software application allows, turn the display to light characters on a
More informationMONITOR MOUNTS STYLE WITH STRENGTH AND FLEXIBILITY. Displays are shown with Apple VESA adapter.
MONITOR MOUNTS STYLE WITH STRENGTH AND FLEXIBILITY. Displays are shown with Apple VESA adapter. MONITOR MOUNTS K1 FEATURES Dynamic height adjustment using gas spring technology can be fine-tuned for different
More information3-Lamp Fluorescent Ring Light 19" INSTRUCTIONS
3-Lamp Fluorescent Ring Light 19" INSTRUCTIONS Introduction Thank you for choosing Impact. The Impact 3-Lamp Fluorescent Ring Light 19" is a continuous light for photography and video. It casts a soft,
More informationComputer Hardware MOUNTING SOLUTIONS
Computer Hardware MOUNTING SOLUTIONS Worldwide leader in medical instrument and IT mounting solutions GCX has more than 45 years global experience creating fully configurable mounting solutions exclusively
More informationSpotting Scope Instruction Manual
Spotting Scope Instruction Manual 841103 / 846060T 03-16 SETUP and OPERATION Congratulations on the purchase of your Simmons spotting scope, a versatile high-performance spotting scope offering a wide
More informationNorth America Professional Furniture Arms and Clamp Kits
North America Professional Furniture Arms and Clamp Kits HX: Premium function and finish, strong weight capacity, rotation control $$$$ LX: Modular, functional, flexible $$$ MXV: Slim profile, rotation
More informationSpotting Scope Instruction Manual
Spotting Scope Instruction Manual Model#s : 841100 / 841101 Lit. #: 98-0080 / 11-09 1 SETUP and OPERATION Congratulations on the purchase of your Simmons spotting scope, a versatile high-performance spotting
More informationz Flo Monitor Arms Y
z Flo Y Monitor Arms Perfect monitor placement for every person, place, and posture Flo Monitor Arms Designed by Colebrook Bosson Saunders If you can t adjust the placement of your monitor to a viewing
More information194B Dual LCD Arm Specifications
194B Dual LCD Arm Weight capacity: 6 kgs each screen up to 22 Meets with VESA 75*75 and 100*100mm. The two arms are easily adjustable for swinging into any position With C-Clamp for desktop mounting. 193B
More informationDX-M. Owner s Manual. Photo Tripod
DX-M Owner s Manual Photo Tripod Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features a rapid center column that detaches to serve as an adjustable
More informationQuickSpecs. Models. HP Notebook Stands
Introduction include a range of convenient solutions and space-saving designs that easily connect to your HP Business Notebook and enable easy viewing and an ideal desktop computing environment. Models
More informationDSE Workstation Assessment Checklist
DSE Workstation Assessment Checklist This checklist should be used when completing DSE assessments. All completed forms should be reviewed to identify any problems that require further action. Department
More informationV40 Videoboom MAIN OPERATING INSTRUCTIONS INDEX 5. SPECIFICATIONS V40 1. INTRODUCTION 2. LIST OF FUNCTIONS AND PARTS
MAIN OPERATING INSTRUCTIONS V40 Videoboom INDEX 1. INTRODUCTION 2. LIST OF FUNCTIONS AND PARTS 3. INSTRUCTIONS V40 3.1 ASSEMBLY & SETTING UP 3.2 WEIGHT SYSTEM 3.3 MOUNTING THE VIDEO CAMERA 4. USING THE
More informationInstruction Manuall. Flowcam Series. Professional dual-arm Camera Stabilizer System 5-15 lbs
Flowcam Series Professional dual-arm Camera Stabilizer System 5-15 lbs Instruction Manuall Please read the instruction manual thoroughly before operating your aviator stabilizer for the first time to avoid
More informationHEIGHT ADJUSTMENT. Manual Crank - Front/Top Mounted
Series 3 User Guide HEIGHT ADJUSTMENT Manual Crank - Front/Top Mounted The worksurface adjusts via a simple hand crank. Turn hand crank clockwise to raise the desk and counterclockwise to lower the desk.
More informationFor more information please visit
For more information please visit www.rollermouse.com Contour Design, Inc. 10 Industrial Drive Windham New Hampshire, 03087, USA Phone: 800-462-6678 E-mail: ergoinfo@contourdesign.com Contour Design Europe
More informationPortable Staging User Guide
Portable Staging User Guide Components: ExpressDeck was designed for quick and easy assembly: set up is a snap, even if you have no experience! So let s take a moment to meet the components of your new
More informationPV Series. Owner s Manual. Photo Tripod
PV Series Owner s Manual Photo Tripod Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features an adjustable center column for smooth and precise camera
More informationCHIEF Stand. K3F220/K3G220 (2x2) K3G320 (3x2) EX241UN / -H Multi-Screen Installation Manual
CHIEF Stand K3F220/K3G220 (2x2) K3G320 (3x2) EX241UN / -H Multi-Screen Installation Manual Contents General Information and Cautions. 3 Chapter 1 Removing the Bezel 4 Purpose. 4 How to Remove the Bezel......................5
More informationProduct Overview. Features
APCF1 Model Tripod Product Overview The Ravelli APCF1 is a Professional Quality Carbon Fiber Tripod providing a solid base for high-end photographic equipment. This model is a mix of carbon fiber and magnesium
More informationGH-30. Gimbal Head. You re on steady ground
GH-30 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-30 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. The
More informationFluid heads perform best when installed on a tripod fitted with a 75mm or 100mm video bowl with leveling base.
FH-350 Fluid Head FH-350 Fluid Head SPECIFICATIONS: FH-350 Counterbalance Range*...1.6-10 pounds (0.7-4.5kg) Sinusoidal Restoring Torque...Infinite Adjustment, 8-50 inch-pounds Tilt Range... ±90º Damping
More informationQuickSpecs. Models HP Hot Desk Stand New! HP Hot Desk 2nd Monitor Arm New! HP Notebook Stands
Introduction include a range of convenient solutions and space-saving designs that easily connect to your HP Business Notebook and enable easy viewing and an ideal desktop computing environment. Models
More informationORDER GUIDE MOUNTS FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s
ORDER GUIDE MOUNTS FOR LCD DISPLAYS, KEYBOARDS, LAPTOPS, CPU s Configurations Confirgurations #60210 series Worksurface mount LCD arm Selections 2. Adjustable arm 3. Extension arm Numbers #22-04-3 #22-04-5
More informationZero Gravity Rig Operating Instructions
Welcome to our new top-of-the-line shoulder support system for cameras up to 15 lbs - the ZG Rig. In addition to its totally unique vertical balancing mechanism, this system is designed to be configurable
More informationRECEPTION & OCCASIONAL
RECEPTION & OCCASIONAL Making the right first impression MANUFACTURED IN THE USA RECEPTION & OCCASIONAL Reception desks are an important factor in making the right first impression on your clients and
More informationExtra Large Full Motion TV Mount for Televisions
8008981 TV Size Range: 47 ~ 84 Maximum Weight Capacity: 60 kg/132 lbs Maximum Mounting Pattern: 800 mm x 600 mm (31.4 x 23.6 ) Distance to the Wall: 5.5-45 cm Extra Large Full Motion TV Mount for 47-84
More informationCOBRA-1 Monitor Supports Single Screen. COBRA-1 & COBRA-1HD series
Cable Management Weight Gauge Height Adjustable COBRA-1 Monitor Supports Single Screen The COBRA-1 light duty & COBRA-1HD heavy duty monitor arms are designed with elegant styling, smooth operation, unmatched
More informationASSEMBLY AND ADJUSTMENT
EDGE-WALL MONITOR ARM EDGE-WALL Rev A 2/17 Model EDGE-WALL-SLV ASSEMBLY AND ADJUSTMENT EDGE-WALL MONITOR ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts and
More informationBOOKCASES & STORAGE. A place for everything MANUFACTURED IN THE USA
BOOKCASES & STORAGE A place for everything MANUFACTURED IN THE USA BOOKCASES & STORAGE Wardrobe/storage cabinets are multi purpose, multi functional cabinet for all your storage needs Simple bookcases
More informationCTT Section Carbon-Fiber Tabletop Tripod. You re on steady ground 1
CTT-1000 3-Section Carbon-Fiber Tabletop Tripod You re on steady ground 1 INTRODUCTION Thank you for choosing Oben! The Oben CTT tripod is a sturdy and high-quality carbon-fiber tabletop tripod that provides
More informationSEQUEL 6051/6052 LIFT DESK
SEQUEL 6051/6052 customerservice@ OWNER S MANUAL Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationCarl's Table : CT15 OWNER'S MANUAL & TROUBLE-SHOOTING GUIDE
OWNER'S MANUAL & TROUBLE-SHOOTING GUIDE Carl's Table : CT15 Part Number: CT15SM/DG Anthro Corporation 10450 SW Manhasset Dr. Tualatin, OR 97062 Toll-free: 800.325.3841 Fax: 800.325.0045 email: sales@anthro.com
More informationCOBRA-1 Monitor Supports. COBRA-1 & COBRA-1HD series (Power Base) Single Screen Power Base
Cable Management Weight Gauge Power Base COBRA-1-POW-SIL-D COBRA-1 Monitor Supports Single Screen Power Base The COBRA-1 light duty & COBRA-1HD heavy duty monitor arms with power base are designed with
More informationFlowPod Stabilizer / MonoPod / Low Mode
FlowPod Stabilizer / MonoPod / Low Mode FlowPod Operating Manual Thank you for purchasing the versatile FlowPod, our patented stabilizer/support. The FlowPod offers several shooting options that will help
More informationQuickStart Guide. Contents
Contents QuickStart Guide The Tiffen Company, 90 Oser Avenue, Hauppauge, New York 11788 631-273-2500 800-645-2522 www.tiffen.com Tiffen Steadicam Operations, Glendale, CA 818-843-4600 1-800-593-3331 www.steadicam.com
More informationSetup Information Panosaurus May 3, 2011
Setup Information Panosaurus 2.0 www.gregwired.com May 3, 2011 Please take the time to read all of the setup information to ensure success and ease of use of this tripod head. Much of the setup is a one
More information