Series 2M801 Connector

Transcription

1 1 Series 2M801 Connector PDS-223 Ordering Guide for 2M801 Plug and Receptacle Series Style Service Class - Insert Arrg. Contact Type Alternate Position 2M801-00X -16 M 7-10 P A KEYING SERIES 2M Banding Platform 2M Rear Accessory Thread 2M Receptacle with Banding Platform 2M Receptacle with Accessory Thread style -16 Plug with Anti-Decoupling Spring -26 Self-Locking Plug with Ratchet Mechanism (the- Clicker ) -01 In-Line for Free-Hanging Cable -02 Square Flange for Front or Rear Mounting -07 Jam Nut for Rear Panel Mounting C M NF ZNU MT Z1 SHELL SIZE - INSERT ARRANGEMENTS Code # listed under each diagram in the insert chart SERVICE CLASS Finish AluminumBlack Anodize (Non- Conductive) AluminumElectroless Nickel AluminumCadmium with Olive Drab Chromate AluminumZinc-Nickel with Black Chromate AluminumNickel-PTFE Stainless SteelPassivated P S A B B A A B A B C 230 D E F 210 CONTACTS Pin Contacts Socket Contacts Same as P except supplied less pin Contacts Same as S except supplied less socket contacts ( A & B designate nonstandard contact applications)

2 2 Contact Arrangements Contact Arr Contact Arrangements No. of Contacts #23 #20 #20HD #16 # PDS-223

3 3 2M801 Dual-Start ACME Threads Plug 2M and 2M PDS-223 INTEGRAL BAND PLATFORM 2M M MASTER KEY 2 SAFETY WIRE HOLES AT 180 SHIELD TERMINATION PLATFORM B THREAD B THREAD C DIA A DIA STRAIGHT KNURL D THREAD Style 16 Style 26 A Dia. A Dia. C Dia. in. mm. in. mm B Thread in. mm. D Thread UNEF-2A P-.1L-2B P-.1L-2B P-.1L-2B P-.1L-2B P-.1L-2B P-.1L-2B P-.2L-2B P-.2L-2B P-.2L-2B P-.2L-2B

4 4 2M801 Dual-Start ACME Threads Jam Nut Receptacle 2M and 2M INTEGRAL BAND PLATFORM 2M ACCESSORY THREAD 2M PDS-223 MASTER KEYWAY PANEL THICKNESS B FLAT F DIA. C FLAT A DIA. D THREAD RED BAND FULL MATE INDICATOR E THREAD G THREAD A Dia. B Flat C Flat F Dia. E Thread in. mm. in. mm. in. mm. D Thread UN-2A in. mm. G Thread UN-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.2L-2A P-.2L-2A P-.2L-2A P-.2L-2A SERIES 2M801 JAM NUT PANEL CUTOUT A FLAT B DIA. in. ±.002 A Flat mm. ± 0.05 in. ±.002 B Dia. mm. ±

5 5 2M801 Dual-Start ACME Threads Square Flange Receptacle 2M and 2M INTEGRAL BAND PLATFORM 2M M PDS B BSC TYP MASTER KEYWAY C DIA. F DIA. A SQ TYP 4X D DIA. THRU E THREAD RED BAND FULL MATE INDICATOR.100 B 2.54 BSC PANEL THICKNESS TYP MASTER KEYWAY C DIA. G THREAD A B BSC C Dia. D Dia. F Dia. 4X D in. mm. in. mm. in. mm. in. ± mm. ± in. mm. G Thread DIA E Thread UN-2A A SQ TYP THRU F DIA E THREAD PANEL RED.093 BAND 2.36 FULL THICKNESS MATE.128INDICATOR INTEGRAL BAND.560 PLATFORM M M A DIA. C DIA.± B BSC SERIES 2M801 PANEL CUTOUT A Dia. B Dia. C Dia. in. mm. in. mm. in. mm

6 6 2M801 ACME Threads In-Line Receptacle 2M and 2M PDS-223 INTEGRAL BAND PLATFORM 2M M MASTER KEYWAY A DIA D DIA. B FLAT C THREAD RED FULL MATE INDICATOR STRIPE E THREAD A Dia. B Flat D Dia. in. mm. in. mm. C Thread in. mm. E Thread UNEF-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.1L-2A P-.2L-2A P-.2L-2A P-.2L-2A P-2L-2A Notice: Specifications are subject to change without notice. Contact your nearest Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL is a registered trademark of Corporation Corporation Printed in U.S.A

7 1 Series 2M803 PDS-224 Ordering Guide for 2M803 Plugs and Receptacles Series Style Service Class - Insert Arrg. Contact Type Alternate Position 2M803-00X -06 NF 9-19 P N SERIES 2M Crimp Contact, Banding Platform for Direct Attachment of Direct Attachment of Cable Shield and Overmold 2M Crimp Contact, Rear-Accessory Thread 2M Receptacle with Banding Platform for Direct Attachment of Cable Shield and Overmold 2M Receptacle with Rear Accessory Thread SHELL SIZE - INSERT ARRANGEMENTS SEE CONTACT ARRANGEMENTS PAGE F-2 P S A B CONTACTS Pin Contacts Socket Contacts Same as P except supplied less pin Contacts Same as S except supplied less socket contacts ( A & B designate nonstandard contact applications) style -06 Plug -07 Jam Nut -02 Flange Mount -01 In-Line C M NF ZNU MT SERVICE CLASS Finish AluminumBlack Anodize (Non- Conductive) AluminumElectroless Nickel AluminumCadmium with Olive Drab Chromate AluminumZinc-Nickel with Black Chromate AluminumNickel-PTFE Key Position KEYING Key Rotation A B N X Y 230 Z1 Stainless SteelPassivated Z A B B A

8 2 Contact Arrangements PDS-224 Contact Arr Contact Arrangements No. of Contacts #23 #20 #20HD #16 #

9 3 2M Turn Bayonet Coupling Plug 2M and 2M PDS-224 INTERGRAL BAND PLATFORM 2M M C DIA A THD B DIA. A Thread UNEF-2A B Dia. Max C Dia. in. mm. in. mm

10 4 2M Turn Bayonet Coupling Jam Nut Receptacle 2M and 2M PDS-224 INTEGRAL BAND PLATFORM 2M M MASTER KEYWAY A DIA. D DIA. G DIA. D DIA. C FLAT E THREAD PANEL THICKNESS E THREAD F THREAD PANEL THICKNESS B FLATS TYP A Dia. B Flat C Flat D Dia. G Dia. in. mm in. mm. in. mm in. mm. E Thread F Thread in. mm UNEF-2A UNEF-2A UNEF-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A PANEL CUTOUT FOR JAM NUT REPTACLE in. ±.002 A Flat B Dia mm. ± 0.05 in. mm A FLAT B DIA.

11 5 2M Turn Bayonet Coupling Flange Mount Receptacle 2M and 2M INTEGRAL BAND PLATFORM 2M PDS-224 2M MASTER KEYWAY A PLCS D DIA F DIA D DIA C REF B BSC E THREAD 45 A Max. B Bsc. C Ref. D Dia. F Dia. in. mm in. mm. in. mm in. mm. E Thread in. mm UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A A BSC 2X DIA B DIA FLANGE MOUNT PANEL CUTOUTS A B Dia in. mm. in. mm Notice: Specifications are subject to change without notice. Contact your nearest Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL is a registered trademark of Corporation Corporation Printed in U.S.A

12 1 Series 2M805 Connector PDS-225 Ordering Guide for 2M805 Plug and Receptacle Series Style Service Class - Insert Arrg. Contact Type Alternate Position 2M805-00X -16 C S A SERIES 2M Plug with Banding Platform 2M Plug with Accessory Thread 2M Receptacle with Banding Platform 2M Receptacle with Accessory Thread style -16 Plug Connector with Ratcheting Anti-Decoupling Mechanism -01 In-Line Receptacle -02 Square Flange Receptacle -07 Jam Nut for Rear Panel Mounting Receptacle C SHELL SIZE - INSERT ARRANGEMENTS SEE CONTACT ARRANGEMENTS PAGE P S A B SERVICE CLASS Finish AluminumBlack Anodize (Non- Conductive) CONTACTS Pin Contacts Socket Contacts Same as P except supplied less pin Contacts Same as S except supplied less socket contacts ( A & B designate nonstandard contact applications) Key Position KEYING Key Rotation A B Normal A B C 230 D M AluminumElectroless Nickel NF ZNU MT AluminumCadmium with Olive Drab Chromate AluminumZinc-Nickel with Black Chromate Durmalon Nickel-PTFE Aluminum A B Z1 Stainless SteelPassivated Receptacle B A Plug

13 2 Specifications DWV Insulation Resistance Operating Temperature Immersion, Mated EMI PEPERFORMANCE SPIFICATIONS Connector Insulator Seals Pin Contact Socket Contact Contact Retainer Clip # VAC Seal level, #20HD 750 VAC, #12 and # VAC 5000 Megohms Minimum -55 C to +150 C MIL-STD-810 Method 512. One Meter for One Hour. 65 db Minimum from 1GHz. to 10 GHz. MATERIALS AND FINISHES Aluminum or Stainless Steel Polyphenylene Sulfide (PPS) Fluorosilcone Rubber Copper Alloy, Gold over Nickel Plating Copper Alloy, Gold over Nickel Plating, with SST Hood Beryllium Copper, Unplated Contact Arrangements Contact Arr. PDS-225 Contact Arrangements No. of Contacts #23 #20 #20HD #16 #

14 3 2M805 Tri-Start Plug 2M and 2M PDS-225 PLUG WITH INTEGRAL BAND PLATFORM M PLUG WITH M A THREAD EMIRFI SPRING EMIRFI SPRING A THREAD MASTER KEY C DIA. B DIA. C DIA. SELF-LOCKING COUPLING KNURL D THREAD SELF-LOCKING COUPLING A Threads.1P-.3L-TS-2B B DIA. C DIA. in. mm. in. mm. D THREADS ACCESSORY UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A

15 4 PDS-225 2M805 Tri-Start In-Line Receptacle 2M and 2M REPTACLE WITH INTEGRAL BAND 2M REPTACLE WITH 2M *GROMMET FOR POWER AND COMBO ARRANGEMENTS C THREAD * C THREAD * MASTER KEYWAY A DIA. D DIA. B FLAT RED BAND FULL MATE INDICATOR RED BAND FULL MATE INDICATOR E THREAD A DIA. B D DIA. C Threads in. mm. in. mm..1p-.3l-ts-2a in. mm. E Threads Accessry UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A

16 5 PDS-225 2M805 Tri-Start Square Flange Receptacle 2M and 2M REPTACLE WITH INTEGRAL BAND 2M * REPTACLE WITH 2M * MASTER KEYWAY *GROMMET FOR POWER AND COMBO ARRANGEMENTS B BSC TYP C DIA. F DIA. A SQ TYP 4X D DIA. E THREAD RED BAND FULL MATE INDICATOR E THREAD RED BAND FULL MATE INDICATOR G THREAD A B C DIA. D DIA. in. mm. in. mm. in. mm. in. ±.003 F DIA. mm. E Threads ±.08.1P-.3L-TS-2A in. mm. G Threads Accessry UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A UNEF-2A

17 6 2M805 Tri-Start Jam Nut Receptacle 2M & 2M REPTACLE WITH INTEGRAL BAND PLATFORM 2M REPTACLE WITH 2M PDS MASTER KEYWAY E DIA. B FLAT D THREAD F THREAD PANEL THICKNESS D THREAD RED BAND INDICATOR RULL MATE F THREAD G THREAD PANEL THICKNESS C FLAT TYP A DIA. A DIA. B C D Threads E DIA. in. mm. in. mm. in. mm..1p-.3l-ts-2a in. mm. F Threads G Threads Accessry UNEF-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A UN-2A UNEF-2A PANEL CUTOUT FOR JAM NUT REPTACLE in. ±.002 A Flat mm. ± 0.05 in. ±.005 B Dia mm. ± A FLAT B DIA. Notice: Specifications are subject to change without notice. Contact your nearest Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL is a registered trademark of Corporation Corporation Printed in U.S.A