VIPER. Quick User Guide
|
|
- Helena Douglas
- 5 years ago
- Views:
Transcription
1 VIPER Quick User Guide 1
2 2 Please read this manual thoroughly before use and keep it handy for future reference.
3 Contents 1. Overview DVR Description DVR power up Login Live Screen Configuration Icons in Live screen Live Launcher menu Quick menu Camera selection PTZ camera control Search/Playback Search Playback Backup ( Archive)
4 1. Overview 1.1 DVR Description No. Name Function 1 Power status LED Power indication ON/OFF 2 Recording status LED Status of recording 3 Network LED Illuminated if Network connected 4 USB port USB port is connected for USB mouse or firmware upgrade, and data back-up. 1.2 DVR power up When the NVR is powered up, it will take a couple of minutes to boot, the following icons will be displayed in order as it goes through it s booting cycle When the boot up process is completed a buzzer will sound and the start up screen will be displayed Login In Log in screen, enter the ID, Password and press OK. Note Default ID & Password is admin/admin VIPER Quick userguide V1.0 1
5 2. Live Screen Configuration No. Item Description 1 Set up menu Setting menu is located at the top of the screen (Admin only) 2 Live screen Shows live video of connected cameras. 3 Launcher menu Launcher menu is located at the bottom of the screen. 4 Quick menu Clicking the right button of a mouse displays Quick menu. VIPER Quick userguide V1.0 2
6 2.1 Icons in Live screen Each icon in the live screen displays a present setting status or a function. UI screen consists of like below. Note Chosen live screen is marked as a blue frame; mouse-located live screen is marked as yellow one. No. Icon Description 1 CH1 CAM1 Channel numbers and camera titles 2 A camera with PTZ function PTZ control function in process Recording in alarm event mode Recording in motion event mode Recording in panic recording mode Recording in consecutive recording mode 3 Video loss icon 4 Mic ON/OFF Speaker ON/OFF 6 Displaying present time and date VIPER Quick userguide V1.0 3
7 2.2 Live Launcher menu This section describes Launcher menu in the bottom of the screen. Figure 2-1 Launcher menu Table 2-1 Launcher menu Item and Description No. Item Description 1 Log in/out status and logged in ID 2 Date & Time Displaying present date and time 3 HDD Displaying HDD capacity in use 4 Moving to previous/next partition screen 5 Displaying live screen in order set (toggle) 6 Selecting partition mode to mark in live screen (single screen, 4-, 9-, and 16- partition) 7 Stopping or replaying selected live screen images (toggle) 8 Audio on or mute chosen live screen(toggle) 9 Capturing channels users want 10 Bookmarking with date and time users want 11 Make a backup video of users want. 12 Searching recording data (time, event, and thumbnail). 13 Playing recorded data 14 Starting immediate recording of selected channel 15 Locking or releasing launcher menu (toggle) VIPER Quick userguide V1.0 4
8 2.3 Quick menu This section depicts Quick menu when users click the right button of the mouse in live screen. No. Item Description 1 Screen Mode Selecting the partition mode of live screen (Full, 2X2, 3X3, and 4x4). 2 Zoom in Magnifying selected live screen (Zoom out, 2 times, 4 times, and 8 times). 3 Freeze Stopping or replaying selected live screen images (toggle) 4 Speaker OUTPUT/Mute Turning on/off a sound speaker 5 PTZ Control Controlling PTZ Function 6 Stop Alarm Stopping monitoring alarm output and event 7 Spot Mode Set the output mode of a spot monitor (Auto, Full, and 4x4). 8 Playback Playing selected live screen images (before 30 sec, 1 min, 5 min, 10 min, 30 min, 1-hour, Go to last play time, and Go to last record time) 9 Search Searching recording data (time, event, thumbnail, and text). 10 Backup Backup video users want. 11 Setup Opening setting menu pop-up. For more information about setting menu, see section 0 Camera selection Individual cameras or multi screen modes can easily be selected using the Mouse. 1. Selecting a single camera from a multi screen display To select a single camera from any multi-screen view, simple hover the mouse over the required camera and double click on it s image. This will display the selected camera in full screen view. To return to the same multi-screen view, double click on the full screen image. VIPER Quick userguide V1.0 5
9 2. Automatic sequencing of cameras To start an automatic sequence of camera images. 12 Status Opening a pop-up displays device system log, event, and recording status (system log, event, and save) 13 Log in/log out Log in/log out 14 Shutdown Unplugging or restarting the device (shutdown, restart). VIPER Quick userguide V1.0 6
10 2.4 Camera selection Individual cameras or multi screen modes can easily be selected using the Mouse. 1. Selecting a single camera from a multi screen display To select a single camera from any multi-screen view, simple hover the mouse over the required camera and double click on it s image. This will display the selected camera in full screen view. To return to the same multi-screen view, double click on the full screen image. 2. Automatic sequencing of cameras To start an automatic sequence of camera images, select the sequence icon on the Launcher menu at the bottom of the screen: 3. Selecting different multi-screen views To select different multi-screen viewing options select the screen icon on the Launcher menu at the bottom of the screen: 4. Manual stepping through cameras or multi screen views To manually select different cameras or multi-screen views select the left or right arrows on the Launcher menu at the bottom of the screen: VIPER Quick userguide V1.0 7
11 2.5 PTZ camera control PTZ cameras cam be controlled when selected in full screen mode. To access the PTZ OSD menu, first select the camera full screen, then right click anywhere on the screen to display the Quick Menu: Selecting the PTZ control option will diplsay a PTZ control panel and the PTZ icon in the center of the screen: The camera can be moved by either: 1. Pressing and holding on an arrow. or 2. Click on the screen and drag (the further from the icon the faster the speed) Use the mouse scroll wheel to zoom in or out. Presets / Tours etc To select Preset positions or Tours right clicking anywhere on the screen will display the following menu: Selecting any option will display drop down menu. VIPER Quick userguide V1.0 8
12 3. Search/Playback This chapter describes Live Launcher search and play menu located at the bottom of the screen. Figure 3-1 Live Launcher Search, Play menu Table 3-1 Item and Description of Live Launcher Search, Play menu No. Item Description 1 Searching recording data (time, event, and thumbnail). 2 Playing recorded data go direct to playback mode. 3.1 Search This function allows searching of recorded data via various methods: Time, Event, Thumbnail, Smart Search and Text. Figure 3-2 Search: Time Table 3-2 Search: Time Item and Description No. Item Description 1 Calendar Select the date to be searched 2 Time Set the time to be viewed 3 Bookmark Select any pre-defined bookmarks 4 Timeline Displays the timelines across channels 5 Preview Previewing video clips searched 6 Play Playing video clips. For more information about Live bar, see section 0 Playback. 7 Cancel Exit the search screen Note: For more detail on more advanced searching options please refer to the main manual supplied on the CD. VIPER Quick userguide V1.0 9
13 3.2 Playback To play recorded data Figure 3-3 Playback Launcher Table 3-3 Playback Launcher Item and Description No. Item Description 1 Play forward 2 Date and Time Displaying date and time of video being played 3 Moving to the first section of the video 4 Playing the videos with multiplied speed in reverse (2~64x). 5 Playing the videos with lower speed in reverse (1/2~1/8x). 6 Play and Pause (toggle). 7 Play forward at slow speeds (1/2~1/8x). 8 Fast forward (2~64x). 9 Moving to previous/next channel or multi screen 10 Selecting the partition mode to mark in the screen 11 Searching the recorded data (time, event, and thumbnail). For more information about search, see section 3.1 Search. 12 Go to Live mode 13 Opening or closing the record timelines 14 Activating/deactivating automatic hidden function of Launcher menu VIPER Quick userguide V1.0 10
14 3.3 Backup ( Archive) To back up information to A USB pen (or CD/DVD on HDAL model), right click on the screen to display the quick menu. Select the BVACK up option: This will display the following menu page: 1. Plug in a USB pen to the recorder, when it is discovered it will be displayed in the Device window 2. Select the required channels 3. Select the Start and Stop time 4. Give the download folder a logical name 5. Select H4V as back up format to download player software. 6. Click calculate to ensure the time period will fit on the pen 7. Click Start VIPER Quick userguide V1.0 11
15 VIPER Quick userguide V1.0 12
Quick Guide. ENC-H Video Encoder XX
Quick Guide ENC-H264-16 Video Encoder XX298-20-00 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely
More informationChapter 3 Operating instructions
Chapter 3 Operating instructions Summary This chapter describes the how to control and navigate through the TVR 30 s menus and options. Content Control interfaces 10 Controlling the TVR 30 10 Front panel
More informationPIVOT CMS CLIENT SOFTWARE USER MANUAL
PIVOT CMS CLIENT SOFTWARE USER MANUAL 1 CMS USER GUIDE 1.1 PC REQUIREMENT Recommended PC Requirement OS CPU VGA RAM HDD Graphics Card OS CPU VGA RAM HDD Windows Vista, 7 or higher Intel Core2Quad Q9400
More informationVideo Management Software
Video Management Software User Manual Web: europesecurity.eu Mail: info@europesecurity.eu Tel.: 0541 352 952 User s Manual 2 Contents CHAPTER : XMS CENTRAL USER MANUAL 1 PC REQUIREMENT 3 2 INSTALL 3 3
More informationAVerMedia IWH3216 Touch Quick Installation Guide
AVerMedia IWH3216 Touch Quick Installation Guide NOTICE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY. WARNING TO REDUCE
More informationSmartWatch Eco/Eco Compact
SmartWatch Eco/Eco Compact Digital Video Recorders SmartWatch Eco SmartWatch Eco Compact Quick User Guide Index Box Contents...3 Front Panel Controls...4-5 SmartWatch Eco Compact...4 SmartWatch Eco...5
More informationFigure 4-9. Click Finish button, system pops up a dialogue box. Click the OK button, the startup wizard is complete. See Figure 4-10.
For detailed information, please refer to chapter 4.11.4.1.1. Figure 4-9 Finish button, system pops up a dialogue box. the OK button, the startup wizard is complete. See Figure 4-10. Figure 4-10 4.4 Preview
More informationDigital Recorder End User Guide. Official UK distribution partner
Digital Recorder End User Guide Official UK distribution partner 2 Installer Information Contents General Operation Mouse Operation Logging into the System Quick Menu PTZ Control 4 5 5 6 Playback Operation
More informationUser Manual. Central Monitoring Software for TER-series recorders. CenPro
EN User Manual Central Monitoring Software for TER-series recorders CenPro Contents CENPRO USER MANUAL 1 PC REQUIREMENT 3 2 INSTALL 3 3 UNINSTALL 5 4 BASIC OPERATION 7 4.1 Log In 7 4.2 Screen Layout 8
More informationDigital Recorder End User Guide
Digital Recorder End User Guide metcalfeallen www.metcalfeallen.co.uk - 01884 38222 - admin@metcalfeallen.co.uk Installer Information Metcalfe Allen Ltd Unit 7 Saunders Way Kingsmill Industrial Estate
More informationContents Contents. Chapter 1. Program Installation. Chapter 2. For the start of CMS. Chapter 3. Monitoring. Chapter 4. E-Map Mode
CMS User's Manual Contents 0 Contents Chapter 1. Program Installation 1.1 PC specifications 1.2 Program Installation Chapter 2. For the start of CMS 2.1 Site Registration Setup (Network Camera Registration)
More informationThe ULTIMA series DVR can be operated with a mouse or remote controller under the four main modes listed below:
HD-SDI User Manual 13433 NE 20 th ST # T, Bellevue, WA 98005 Tel : 425-457-7790 Toll Free : 1-866-966-6766 Fax : 425-457-7791 Web : http://www.moosoo.com email : moosoo@moosoo.com CH3. How to Use 3-1.
More informationH.264 Network DVR. Quick Start. GUI Display with USB Mouse Control 336Z
336Z H.264 Network DVR Quick Start GUI Display with USB Mouse Control Please read instructions thoroughly before operation and retain it for future reference. For the actual display & operation, please
More informationQuick User Guide to Linux DVR (V2.0)
Quick User Guide to Linux DVR (V2.0) 1 Contents Main GUI Setup GUI Preview PTZ Control Manual Recording Schedule Recording Continuous Recording Schedule Recording Motion Detection Recording Playback File-list
More informationQuick user guide for the Vista Quantum TVI range of DVRs, models included:
Quick user guide for the Vista Quantum TVI range of DVRs, models included: QTVI08-xxx QTVI16-xxx Full manual found on the CD supplied with the DVR Quantum TVI DVR range User guide V1.0 2 Contents SCOPE
More informationH.264 Network DVR. Quick Start
341Z H.264 Network DVR Quick Start GUI Display with USB Mouse Control Please read instructions thoroughly before operation and retain it for future reference. For the actual display & operation, please
More informationTruVision DVR 60 Quick Start Guide
Content Package contents 1 Installation environment 1 Setting up the TVR 60 1 Connecting the devices 2 Turning on and off the TVR 60 2 Operating the TVR 60 3 DDNS settings 5 Live mode 5 Quick Archive 5
More informationIWH3216 Touch/Touch II
IWH3216 Touch/Touch II 16CH Embedded Hybrid DVR Quick User Guide COPYRIGHT 2012 AVer Information Inc. All rights reserved. No part of this document may be reproduced or transmitted in any form, or by any
More informationIntelligent Security and Fire Ltd
Quantum PLUS (H.264) Quick User guide Quick user guide for the Vista Quantum Plus range of H264 DVRs, including the models QP04-xxxhf QP08-xxxhf QP16-xxxhf Full manual found on the CD supplied with the
More informationVMS-A1 Client Software. User Manual
VMS-A1 Client Software User Manual Contents Contents... 2 Chapter1. Overview... 4 1.1 Description... 4 1.2 Features & Functions... 4 Chapter2. Update Info... 6 Chapter3. Starting VMS-A1... 7 3.1 Installing
More informationH5S - 4, 8 and 16 channel H265 NVR 1U User manual
H5S - 4, 8 and 16 channel H265 NVR 1U User manual 1 Please read this manual thoroughly before use and keep it handy for future reference. 2 Before You Begin Read these instructions before installing or
More informationLorex Client 7.0 & Lorex Message Master
Lorex Client 7.0 & Lorex Message Master Software Manual English Version 1.0 MODELS: L19WD Series www.lorexcctv.com Includes L19WD800 & L19WD1600 Copyright 2008 Lorex Technology Inc. Table of Contents Table
More informationMake sure that you have following items supplied with your DVR. If any of these items is missing or damaged, notify your vendor immediately.
1 1. Getting Started 1.1 Checking Supplied Items Make sure that you have following items supplied with your DVR. If any of these items is missing or damaged, notify your vendor immediately. Quick Manual
More informationH.264 Network DVR. Quick Start
H.264 Network DVR Quick Start GUI Display with USB Mouse Control Please read instructions thoroughly before operation and retain it for future reference. For the actual display & operation, please refer
More informationFigure 2: Front panel controls For detailed information on all the button functions, please refer to the user manual.
TruVision NVR 22 (S/P) Quick Start Guide Figure 1: Back panel connections (TVN 22S shown) 1. Connect one audio input to RCA connectors. 2. Connect to an HDTV. The HDMI connection supports both digital
More informationIntelligent Security & Fire Ltd
Copyright 2007-2009 Cortex Global Table of contents: Introduction... 3 1. Login... 3 1.1 Advanced login options... 4 2. Preview... 5 2.1 Main menu... 6 2.2 Camera list... 6 2.3 Main display... 6 2.4 Maps...
More informationThe SW can manage 16CH devices and support 16Ch live view simultaneously. Supported functions are
RMS User Manual 1. Introduction 1.1 Introduce This SW can manage and control several DVRs from Remote site through network at the same time. This SW provides live image monitoring, Playback and DVR configuration.
More informationUnisight Digital Technologies. Unisight DVR Manual Client
Unisight DVR Manual Client 1 Table of Contents Initial Startup...4 Initial Startup...4 Channel Grid...6 DVR Information Window...6 Grid Layout Buttons...7 Camera Status LEDs...7 Extra Function Buttons...7
More informationUser`s Manual. CMS Pro. Professional Central Monitoring Software. Full-featured Enterprise Class Surveillance Solution
Professional Central Monitoring Software CMS Pro Full-featured Enterprise Class Surveillance Solution User`s Manual This document contains preliminary information and is subject to change without notice.
More informationFigure 2: Front panel controls For detailed information on all the button functions, please refer to the user manual.
TruVision NVR 22 (S/P) Quick Start Guide Figure 1: Back panel connections (TVN 22S shown) 1. Connect one audio input to RCA connectors. 2. Connect to an HDTV. The HDMI connection supports both digital
More informationTVR 44HD Quick Start Guide
TVR 44HD Quick Start Guide Figure 1: Back panel connections (16-channel model shown) 1. Connect one audio input to RCA connector. 2. Connect to speakers for audio output. 3. Line in. 4. Connect one CCTV
More informationQVS-AVH-164D/3TB QUICK SETUP GUIDE
QVS-AVH-164D/3TB QUICK SETUP GUIDE LOG IN Once boot up process has been completed the login screen appears, to access Menus select a user and provide the password. The DEFAULT User is ADMIN and the DEFAULT
More informationLOREX CLIENT Remote Agent Software
LOREX CLIENT Remote Agent Software Instruction Manual English Version 1.0 MODEL: L500 Series www.lorexcctv.com Copyright 2006 LOREX Technology Inc. Table of Contents Table of Contents About the Lorex Client...
More informationtruvision DVR 31 Quick Start Guide
truvision DVR 31 Quick Start Guide Content Contact information 1 Package contents 1 Installation environment 1 Setting up the DVR 31 1 Connecting the devices 2 Turning on the DVR 31 2 Operating the DVR
More informationEH6000H series EH6108H + /EH6216H + Quick User Guide
EH6000H series EH6108H + /EH6216H + Quick User Guide COPYRIGHT COPYRIGHT 2011 AVer Information Inc. All rights reserved. No part of this document may be reproduced or transmitted in any form, or by any
More informationNVMS User Manual. Version 2.1.0
NVMS-1000 User Manual Version 2.1.0 Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall
More informationVideo Management Software User Manual
Video Management Software User Manual Manual Version: V1.02 i Thank you for choosing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Disclaimer CAUTION!
More informationCentral Management Software. Cam Viewer 3 Lite. User Manual
Central Management Software Cam Viewer 3 Lite User Manual Version 1.0.0 Table of Contents 1. System Requirement...4 2. Software Installation...5 3. Configuration Wizard...9 3.1 Channel...10 3.1.1 Adding
More informationUSER MANUAL. Mac Version
USER MANUAL Mac Version Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Install and Uninstall... 1 1.2.1 Install the Software... 1 2 Login Software... 3 2.1 Login... 3 2.2 Control Panel Instruction...
More informationQuick Start. H.264 Network DVR 303Z
303Z H.264 Network DVR Quick Start Please read instructions thoroughly before operation and retain it for future reference. The image shown above may differ from the actual product appearance. 792_Quick_V0.9
More informationNetClient software user manual
NetClient software user manual 1-1. General information Net Client is an application which provides users not only viewing and controling remote DVRs, but also receiving realtime event data or alarm signals
More informationAVerMedia. AverDiGi EH5116 PRO. Quick Installation Guide
AVerMedia AverDiGi EH5116 PRO Quick Installation Guide i SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY WARNING TO REDUCE
More informationicms icms User`s Manual This document contains preliminary information and is subject to change without notice.
icms icms User`s Manual This document contains preliminary information and is subject to change without notice. 135 8. icms VIEWER 8.1 System Recommendations 8.1.1 Program installation Method Please follow
More informationQuick Start Guide 4/8/16-CH DVR.
Quick Start Guide 4/8/16-CH DVR 1. Install Hard Drive &DVD Writer 1.1 Install Hard Drive Notice: 1. Support two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security
More informationRMS RemoteManager Software
RMS RemoteManager Software This is a brief manual for quick and convenient reference. Please refer to the User Manual contained in CD for details. Quick Manual 1 st Edition : 31 Mar 2009 The picture might
More informationNVMS1000. User Manual
NVMS1000 User Manual Contents 1 Software Introduction... 1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationSmart Phone Viewer User Manual (iphone / Android) (Support Models All HDx Series except HDF1212)
HDx Series H.264 DVR Smart Phone Viewer User Manual (iphone / Android) (Support Models All HDx Series except HDF1212) H.264 Stand-Alone DVR Superior Video Quality S-ATA Hard Disc Drive Version: 11.11.15
More informationContents. 1 Introduction... 4
DMS64 User Manual Contents 1 Introduction... 4 1.1 Summary... 4 1.2 System Requirements... 4 1.3 Installing Guide... 5 1.4 Reinstalling Guide... 8 1.5 Device Register... 10 1.6 DMS64 Display Mode... 16
More informationAvigilon Control Center Web Client User Guide
Avigilon Control Center Web Client User Guide Version: 4.12 Standard PDF-WEBCLIENT-S-E-Rev2 Copyright 2013 Avigilon. All rights reserved. The information presented is subject to change without notice.
More informationTruVision NVR 50 Quick Start Guide
TruVision NVR 50 Quick Start Guide Content Contact information 1 Package contents 1 Installation environment 1 Quick install 1 First-time use 1 TVN 50 front and back panels 2 Operating the NVR 50 4 Web
More informationHD-SDI Professional DVR Quick Guide
HD-SDI Professional DVR Quick Guide 1. System Login 1.1 User Login Default Admin Password: 00000 1.2 Time Setting and HDD Format Navigate to {Menu} {Setup} {Time} and set the time/date to the appropriate
More informationTable of Contents. Chapter 1 Overview In This Manual RASplus Features Product Information Chapter 2 Installation...
Remote Administration System Plus (RASplus) Table of Contents Chapter 1 Overview... 1 1.1 In This Manual... 1 1.2 RASplus Features... 1 1.3 Product Information... 1 Chapter 2 Installation... 3 Chapter
More informationNVR some functions manual
NVR some functions manual 1. Move image to centre... 2 2. Time modify... 2 3. Camera title modify... 3 4. Mask area setup... 4 5. Record before alarm and record after alarm... 5 6. Record setup... 5 7.
More informationUser manual. SmartPSS. Manual includes
User manual software is used for viewing, playing back and exporting video footage from IP video surveillance systems. Manual includes Logging In Starting Live View Adding a Custom View Using Digital Zoom
More informationSPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY.
COPYRIGHT 2010 by AVerMedia Information, Inc. All right reserved. Reproduction without permission is prohibited. No part of this document may be reproduced or transmitted in any form, or by any means without
More informationQuick Start Guide. Menu Structure. Startup and Shutdown. Using the Setup Wizard. DS-8100-S Series DVR (V2.0.1)
Quick Start Guide DS-8100-S Series DVR (V2.0.1) Menu Structure The menu structure of the DS-8100-S Series DVR is as followed: 1. Enter the Shutdown menu by clicking on Menu > Shut down. 2. Select the Shutdown
More informationTruVision Recorder Operator Guide
TruVision Recorder Operator Guide Live view In the viewer you can see displayed on the live image the current date and time, camera name, and whether a recording is in progress. Information on the system
More informationOSD Main Menu. and password is Select this option enter the Setup menu. Select between different multi-view display formats.
OSD Main Menu To enter the main menu, right click on the mouse and select setup from the submenu or press the setup button on the remote control/ Enter username and password. Option Description The default
More informationLOREX CLIENT 3.0 SOFTWARE MANUAL IRMS Integrated Remote Management Software
LOREX CLIENT 3.0 SOFTWARE MANUAL IRMS Integrated Remote Management Software Instruction Manual English Version 2.0 Copyright 2007 Lorex Technology Inc. www.lorexcctv.com Table of Contents Overview... -
More informationCMS Client Software Operation
CMS Client Software Operation 1. Download CMS...2 2. Add,delete,connect the NVR IP...2 2. View many DVR images at the same time...3 3. Intercom...5 4. Capture...6 5. PTZ control...6 6. NVR Status...7 7.
More informationError! Bookmark not defined.
HD-NVR user manual Directory Part one Basic Operation... 3 1. Basic Installation... 3 1.1 Hard Disk Installation... 3 1.2 Mouse Connection... 3 2. Starting... 3 3.Turn Off... 3 4.Login... 4 5.Preview...
More informationTruVision DVR 30 Quick Start Guide
TruVision DVR 30 Quick Start Guide Content Contact information 1 Package contents 1 Installation environment 1 Setting up the TVR 30 1 Connecting the devices 2 Turning on the TVR 30 2 Operating the TVR
More information1 Divar MR firmware v (date ) and Divar MR CC software v1.0.4 (date )
Divar MR firmware 1.0.4.0042 & Control Center software 1.0.4 release 1 Divar MR firmware v1.0.4.42 (date 2010-08-12) and Divar MR CC software v1.0.4 (date 2010-08-11) This release includes the following
More informationNVMS User Manual
NVMS-1000 User Manual Contents 1 Software Introduction...1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationRemoteManager USER S MANUAL
Remote Monitoring Software RemoteManager USER S MANUAL Thank you for purchasing our products. Before operating the system, please read this User s Manual thoroughly and retain it for future reference.
More informationManual Version: V1.01. Video Management Server Client Software User Manual
Manual Version: V1.01 Video Management Server Client Software User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. Notice
More informationUSER S MANUAL SM4 / SM8 / SM16 REMOTE AGENT
USER S MANUAL SM4 / SM8 / SM16 REMOTE AGENT Revision Date : 2008.10.02. 0 INDEX CHAPTER 1. Installation-------------------------------------------------------- 2 CHAPTER 2. Function introduction------------------------------------------------
More informationTable of Contents. Chapter 1 Overview In This Manual RASplus Features Product Information Chapter 2 Installation...
Remote Administration System Plus (RASplus) Table of Contents Chapter 1 Overview... 1 1.1 In This Manual... 1 1.2 RASplus Features... 1 1.3 Product Information... 1 Chapter 2 Installation... 3 Chapter
More informationUSER S MANUAL GV-DVR1042. Real Time DVR System. Stand Alone 4 Channel.
USER S MANUAL GV-DVR1042 Stand Alone 4 Channel Real Time DVR System www.gviss.com 1 B E F O R E I N S T A L L A T I O N - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
More informationNVMS-7000 Client Software User Manual Version 1.03
NVMS-7000 Client Software User Manual Version 1.03 Contents Chapter 1. Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 Chapter 2. Starting NVMS-7000... 4 2.1 User Registration... 4 2.2
More informationDVR SYSTEM User s Manual
DVR SYSTEM User s Manual Manual Revision : Version 5.3 above Release Date : July 1. 2004 INDEX Chapter. Main Screen -1. Explanation of Main Screen A ~ N Functions per button -2. Pan/Tilt Control O Pan/Tilt
More informationQuick Installation Guide
Quick Installation Guide For Bundles Featuring the QC4098 or QC4096 Network DVR 8 and 6 Channel H.64 Compression All-in-One DVRs with Variable CIF and D Recording Options PART - PACKAGE CONTENTS QC4098
More informationNVMS User Manual
NVMS-1000 User Manual Contents 1 Software Introduction...1 1.1 Summary... 1 1.2 Operation Environment... 1 1.3 Install and Uninstall... 2 1.3.1 Install the Software... 2 1.3.2 Uninstall the Software...
More informationAvigilon Control Center Standard Web Client User Guide. Version 5.6
Avigilon Control Center Standard Web Client User Guide Version 5.6 2006-2015, Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect to any copyright,
More information16-Channel DVR Rear Panel
Digital Video Recorder art. MDVR825B/MDVR808B/49816 DVR Rear Panel 16-Channel DVR Rear Panel Video Input Video Loop Through RS485 Port Alarm Input/Output Network Port RS232C Port Audio In/Out Video Out
More informationNVR Operation Guide. Version 1.0 OCT 2013
NVR Operation Guide Version 1.0 OCT 2013 Content 1. Product Summary... 3 2. Package... 3 3. Appearance and Ports... 3 4. Ready for Operating NVR... 4 5. NVR Quick Operation... 5 5.1 Network Configuration...
More informationW Box VMS BOX T E C H N O L O G I E S.
W Box VMS BOX T E C H N O L O G I E S www.wboxtech.eu Contents Contents... 1 Overview... 3 1.1 Description... 3 1.2 Running Environment... 3 1.3 Function Modules... 3 Live view... 6 2.1 User Registration
More informationNUBIX H.264 DVR Setup Guide
Package Content NUBIX H.264 DVR Setup Guide Inspect the packaging carton. Make sure the NUBIX H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following
More informationTable of Contents. Chapter 1 Overview In This Manual ATVision Pro Features Product Information... 1
Remote Management Software (ATVision Pro) Table of Contents Chapter 1 Overview... 1 1.1 In This Manual... 1 1.2 ATVision Pro Features... 1 1.3 Product Information... 1 Chapter 2 Installation... 3 Chapter
More informationNVR-0316 User s Manual 1 NVR User s Manual. Version 1.0.0
NVR-0316 User s Manual 1 NVR-0316 User s Manual Version 1.0.0 2 NVR-0316 User s Manual Table of Contents Hardware... 4 Overview... 4 LED & Buttons Definitions... 4 Connect to the NVR... 5 Use NVR Search
More informationJVS-D7216 Standalone DVR User Manual
Menu JVS-D7216 Standalone DVR User Manual JVS-D7216 Standalone DVR Instructions 1. Introduction..4 1.1 Product Description...4 1.2 Features..4 1.3 Specifications...4 2. Product Features....6 2.1 Panel
More informationUser`s Manual. Intuitive Software icms. Convenient & Versatile Software MADE IN KOREA
Convenient & Versatile Software Intuitive Software icms User`s Manual MADE IN KOREA M3119iCMSDR This document contains preliminary information and is subject to change without notice. icms4 Table of Contents
More informationVegas Valley Video Systems. Vegas Valley DVR Manual TZHC Series Server
Vegas Valley DVR Manual TZHC Series Server 1 Table of Contents Initial Startup...4 Initial Setup...4 Live Preview Mode...5 DVR Information Window...6 Camera Status LEDs...6 Channel Grid...7 Grid Layout
More informationOSD Main Menu. Select this option to start EZ Setup Wizard. Select this option to enter the Setup menu.
OSD Main Menu To enter the main menu, press the setup button on the remote control or right click on the mouse and select setup from the submenu Enter username and password. The default username is Option
More informationThursday, February 18, SuperCam software for Droid.
SuperCam software for Droid. 1. Begin by entering your the Main Menu of your Android phone. ( Some Android phone menus may look slightly different. ) Now locate the Android Market App. 2. Now choose the
More informationCMS User's Manual. Version 1.9
CMS User's Manual Version 1.9 Introduction 0 Introduction [ Principal function ] This CMS Interlocked with megapixel camera. This CMS supports easy connection and registration of the site(camera) This
More information4CH Real Time DVR. User Guide INFORMATION MAY CHANGE WITHOUT NOTICE. Digital Video Recorder
User Guide INFORMATION MAY CHANGE WITHOUT NOTICE. Table of Contents Caution... 4 Package Contents... 4 Introduction... 5 1. Product Overview...5 2. Front Panel...5 3. Rear Panel...6 4. IR Remote Controller
More informationQuick Start Guide (V1.03) UD.6L0201B1064A01
ivms-4200 PCNVR Quick Start Guide (V1.03) UD.6L0201B1064A01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact the dealer. This manual applies
More informationR4, R8, R16 Digital Video Recorders Quick Setup Guide
R4, R8, R16 Digital Video Recorders Quick Setup Guide This guide provides instructions to initially setup the R16 (16 channel) digital video recorders (DVR). The DVR supports these advanced features: 2
More informationDVR/NVR OS User Manual Ver
DVR/NVR OS User Manual Ver. 2016-11 Chapter 1. DVR / NVR Operation Setup... 3 1-1 Power ON.... 3 1-2 Storage Setup... 3 1-3 Recording Setup... 4 1-4 Date/Time Setup... 4 1-5 Display Setting and Other Setup...
More informationTVR 12 Quick Start Guide
TVR 12 Quick Start Guide Figure 1: Back panel connections 1. Loop through for up to 16 analog cameras (depends on DVR model). 2. Connect to a RS-232 device. 3. Connect up to four alarm inputs. 4. Connect
More informationINSTRUCTION MANUAL. ATVision IP. Please read this manual thoroughly before use, and keep it handy for future reference.
INSTRUCTION MANUAL ATVision IP Please read this manual thoroughly before use, and keep it handy for future reference. Table of Contents Chapter 1 Introduction... 1 1.1 Features... 1 1.2 System Requirements...
More informationTable of Contents. Chapter 1 Introduction Features System Diagram... 2 Multi-Server... 2 Single-Server... 3
inex Standard Table of Contents Chapter 1 Introduction... 1 1.1 Features... 1 1.2 System Diagram... 2 Multi-Server... 2 Single-Server... 3 Chapter 2 Installation... 5 2.1 Product Information... 5 Package
More informationMAC ACS CLIENT SOFTWARE USER MANUAL
MAC ACS CLIENT SOFTWARE USER MANUAL 1 MAC ACS USER GUIDE 1.1 System Requirement Recommended System Requirement OS CPU VGA RAM HDD OS CPU VGA RAM HDD Mac OS X 10.6(snow leopard) Built-in Intel CPU MAC Recommended
More information1 - Introduction About this this manual Configuration SMS Functions Product Information System Requirements 2
Contents 1 - Introduction. 2 1.1 About this this manual... 2 1.2 Configuration 2 1.3 SMS Functions 2 1.4 Product Information 2 1.5 System Requirements 2 2 SMS Installation... 3 2.1 How to install 3 3 -
More informationOSD Main Menu. and password is Select this option enter the Setup menu. Select between different multi-view display formats.
OSD Main Menu To enter the main menu, press the setup button on the remote control or right click on the mouse and select setup from the submenu Enter username and password. Option Description The default
More information960H H.264 DVR Setup Guide
Package Content 960H H.264 DVR Setup Guide Inspect the packaging carton. Make sure the 960H H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following items.
More informationStandard H.264 DVR Setup Guide
Package Content Standard H.264 DVR Setup Guide Inspect the packaging carton. Make sure the Standard H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following
More informationMake sure that you have following items supplied with your DVR. If any of these items are missing or damaged, notify your vendor immediately.
1. Getting Started... 3 1.1. Checking Supplied Items... 3 1.2. User Login... 3 1.3. Time Setting and HDD Format... 4 1.4. Setup... 4 2. System Operation... 5 2.1. Using Tool(Control) Bar... 5 2.2. Display
More informationCMS PRO Software Manual - Beta. Copyright Digimerge 2010
CMS PRO Software Manual - Beta Copyright Digimerge 2010 [CMS] Manual (Revision Record) Revision Record Date Description Author Version 2010. 02. 05 Development Version 2/66 [CMS] Manual (Contents) Contents
More information