POP SQUARE 22 LED RECESSED

Size: px

Start display at page:

Download "POP SQUARE 22 LED RECESSED"

Evangeline Harvey
5 years ago
Views:

PROJECT: TYPE: NOTES: Drop 1" lens Drop 2" lens Flush lens Drop 3" lens Drop 4" lens DESCRIPTION POP Recessed features a uniformly luminous diffuser that sits flush

The diffuser and light engine form a fully enclosed unit secured by a twist-and-lock mechanism for easy maintenance with no exposed hardware.

ORDER GUIDE up to 110 lm/w performance POSQR 22 ULO LED LUMINAIRE ID SIZE OPTICS DROP LENS LIGHT SOURCE CRI LUMEN PACKAGES POSQR - pop square recessed 22-2'X2' ULO

4500 - high output 4500lm 3D - 3" drop 4D - 4" drop COLOR TEMP.

dimming 0-10V DA - Dali OTH - other (consult factory) 1-1 circuit +EB - emergency battery pack +EM - emergency light circuit +NL - night light circuit +GTD -

1 PROJECT: TYPE: NOTES: Drop 1" lens Drop 2" lens Flush lens Drop 3" lens Drop 4" lens DESCRIPTION POP Recessed features a uniformly luminous diffuser that sits flush with the ceiling or drops up to 4" below. The diffuser and light engine form a fully enclosed unit secured by a twist-and-lock mechanism for easy maintenance with no exposed hardware. POP Recessed delivers up to 120 and installs in grid or gypsum board ceilings. ORDER GUIDE up to 110 lm/w performance POSQR 22 ULO LED LUMINAIRE ID SIZE OPTICS DROP LENS LIGHT SOURCE CRI LUMEN PACKAGES POSQR - pop square recessed 22-2'X2' ULO - Uniform FH - flush LED - high performance LED 80-80CRI low output 2500lm Lambertian Optic 1D - 1" drop 2D - 2" drop 90-90CRI medium output 3500lm high output 4500lm 3D - 3" drop 4D - 4" drop COLOR TEMP. VOLTAGE DRIVER ELECTRICAL MOUNTING FINISH k k k k WT - White Tuning CT - Color Tuning V V UNV - 120V-277V V D - dimming 0-10V DA - Dali OTH - other (consult factory) 1-1 circuit +EB - emergency battery pack +EM - emergency light circuit +NL - night light circuit +GTD - generator transfer device TG9 - tegular 9/16" TG15 - tegular 15/16" TB9 - t-bar 9/16" TB15 - t-bar 15/16" ST - screw slot t-bar DTR - drywall trim W - matte white CF# - custom finish specify RAL# See page 3 for ordering code detailed information CONTROLS WIRELESS EWC - EnOcean Wireless Controller LMC - Lutron Motion Controller LDC - Lutron Daylight Controller OPTIONS FU - fuse CU - custom CROSS SECTION POSQR + FH - pop square recessed with flush lens File Name: POPRECESSED22-SQUARE-RECESSED-SPEC Page: 1 / 5

2 GRID CEILINGS DRYWALL CEILINGS RECESSED FH - FLUSH RECESSED 1D - 1" DROP RECESSED FH - FLUSH RECESSED 1D - 1" DROP RECESSED 2D - 2" DROP RECESSED 3D - 3" DROP RECESSED 2D - 2" DROP RECESSED 3D - 3" DROP RECESSED 4D - 4" DROP RECESSED 4D - 4" DROP POSQR- TG9 - tegular 9/16" POSQR - TB15 - t-bar 15/16" POSQR - TG15 - tegular 15/16" POSQR - ST- screw slot t-bar POSQR - TB9 - t-bar 9/16" POSQR - DW- drywall trim 24 3/8" Drywall Bracket 14" between threaded rods 4 1/4" File Name: POPRECESSED22-SQUARE-RECESSED-SPEC Page: 2 / 5

3 OPTICS UNIFORM EFFICIENCY LAMBERTIAN OPTIC (ULO) - made of formed impact modified white PMMA, the optic provides an even light distribution with up to 88% transmission. Its unique enclosed shell design protects LEDs against Electrostatic Discharge and dust while its back surface project a soft glow on the mounting surface. DROP LENS Pop square 22 recessed is available in 5 lens configurations. ELECTRICAL Factory-set adjustable output current electronic driver with V AC line input. Dimmable from at least 100%-5% with 0-10V control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options include Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-to-black) and EcoSystem 5 (100%-5%) dimmable drivers and DALI protocol drivers. 4 3/4" POSQR + FH - flush lens 5 3/4" 1" POSQR + 1D - 1" drop lens EMERGENCY Factory installed long life high temperature recyclable Ni-Cad battery pack with test switch and charge indicator, minimum of 90 minutes operation, up to 1300 lumens (25ºC) emergency lighting output. Recharge time of 24 hours. 6 3/4" 2" 7 3/4" 3" MOUNTING OPTIONS Recess mount into exposed or concealed T-Bar or Tegular grid ceiling POSQR + 2D - 2" drop lens POSQR + 3D - 3" drop lens 8 3/4" TG9 - tegular 9/16" TG15 - tegular 15/16" 4" POSQR + 4D - 4" drop lens LIGHT SOURCE - LED Custom Linear array of mid-flux LED s are mounted directly to the housing for optimal thermal performance. Available in 3000K, 3500K, 4000K and 5000k with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced drive current to optimize efficacy and lumen maintenance. All LEDs have been tested in accordance with IESNA LM and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. low output 4000K medium output 4000K high output 4000K TB9 - t-bar 9/16" TB15 - t-bar 15/16" ST - screw slot t-bar drywall FINISH Interior - 95% reflective, matte white powder coating Exterior - matte white powder coating. File Name: POPRECESSED22-SQUARE-RECESSED-SPEC Page: 3 / 5

4 CONTROLS LumenWerx offers several options for integrating motion and daylight controls into POP luminaires. Wireless options incorporate a wireless controller/powerpack into the luminaire, which receives signals from a wireless sensor (by others) installed in the space. The advantages of the wireless option include greater flexibility of control options, sensor coverage, and system integration Wireless EnOcean Wireless Controller (EWC) provides both a power pack for presence detection control and a 0-10V interface for daylight harvesting. EnOcean wireless sensors (by others) mounted in the room signal the onboard EWC. This option permits manual on/automatic off (vacancy) control. Lutron Motion Controller (LMC) and Lutron Daylight Controller (LDC) provide inputs to Ecosystem drivers. Compatible Lutron wireless motion and daylight sensors (by others) mounted in the room signal onboard LPC or LDC. This option permits manual on/automatic off (vacancy) control. CONSTRUCTION Housing: Folded 18 gauge cold rolled steel housing, matte white powder coating Diffuser: Uniform lambertian optic, formed impact modified acrylic, completely enclosed WEIGHT SQ 22 Flush, 1D, 2D lbs kg SQ 22 3D, 4D lbs kg CERTIFICATIONS ETL - Rated for Dry/Damp locations. Conforms to UL Standard 1598 and certified to CAN/CSA Standard C22.2 No WARRANTY LumenWerx provides a five-year limited warranty of electrical and mechanical performance of the luminaires, including the LED boards, drivers, and auxiliary electronics. LumenWerx will repair or replace defective luminaires or components at our discretion, provided they have been installed and operated in accordance with our specifications. Other limitations apply, please refer to the full warranty on our website. File Name: POPRECESSED22-SQUARE-RECESSED-SPEC Page: 4 / 5

5 2500 LUMEN AT 80CRI - LOW OUTPUT low output 3000K low output 3500K low output 4000K low output 5000K LUMEN AT 80CRI - MEDIUM OUTPUT medium output 3000K medium output 3500K medium output 4000K medium output 5000K LUMEN AT 80CRI - HIGH OUTPUT high output 3000K high output 3500K high output 4000K high output 5000K File Name: POPRECESSED22-SQUARE-RECESSED-SPEC Page: 5 / 5

POP CORE ROUND 36 LED

POP CORE ROUND 36 LED PROJECT: TYPE: NOTES: Shown with 3.5" optics Shown with 5" optics DESCRIPTION POP Core features a simple, uniformly luminous diffuser and delivers up to 120. The diffuser and light engine form a fully