Workshop Catalogue OC Opht halmic Instrumen ts Pty Ltd
|
|
- April James
- 5 years ago
- Views:
Transcription
1 Workshop Catalogue BOC Ophthalmic Instruments Pty Ltd (ACN: ) ATF BOC Ophthalmic Instruments Unit Trust (ABN: ) Unit C Egerton St, Silverwater NSW, 2128 PO Box 6187, Silverwater NSW 2128 Telephone: Fax: Toll Free: sales@bocinstruments.com.au Website:
2 Contents Pliers... 2 Plier, Screw & Nut Driver Set... 5 Pd Ruler... 6 Milling Bits... 7 Rhinestones Kit... 8 Files... 8 Screwdrivers... 9 Dressing Sticks Compound Kit Feeler Tips LE9000 (all series), LE1000 (all series) & LEX ME ME SE9090 (all series) Leap Pads Intermediate Tape Blocks Pliable Cup Pliable Cup Nano Pliable Cup Supporter Full Eye Half Eye Cup Cup Holder & Lens Retainer LE9000 (all series), ME1000, SE9090 (all series) LE1000 (all series), LEX1000 & ME Pliable Cup Remover Edger Drain Pipe Frame Heater Fata Fata Plus Maga Hygienic Box Pupillo UV TESTER Testerpi
3 Pliers LT3T-AC14 LT3T-AC18 LT3T- AC55 LT3T- AC55 2
4 LT3T- AC21 LT3T- AC28 LT3T- AC36 3
5 LT3T- AC901 LT3T- AC40 LT3T- AC47 LT3T- AC49 4
6 Plier, Screw & Nut Driver Set LT3T-B08-AC Contains: 8 x Plier 4 x Screw Driver 2 x Nut Wrench 1 x Tool Stand Dimensions: 286 x 132 x 183mm 5
7 LT3T- B01A Pd Ruler LT3T- 014A 6
8 Milling Bits Sizes 0.8mm 1.0mm 1.2mm Supplied in pack of 10 pieces Hole Gauge LT3T- A16 7
9 Rhinestones Kit LT3T- A70 Files LTN113 LTN122 8
10 Screwdrivers LT3T- A19C 9
11 LTN LTN20 50 LTN
12 Dressing Sticks Finishing N41002-M611 Roughing N41002-M612 Compound Kit N
13 Feeler Tips LE9000 (all series), LE1000 (all series) & LEX1000 Feeler Tip Left (front surface of lens) Feeler Tip Right (rear surface of lens) N40340-M983 N40340-M984 ME1000 Feeler Tip Left (front surface of lens) Feeler Tip Right (rear surface of lens) N40350-M435 N40350-M436 ME1200 Feeler Tip Left (front surface of lens) Feeler Tip Right (rear surface of lens) N44501-M462 N40350-M436 SE9090 (all series) Roller: Feeler (front & rear surface of lens) N40271-M673 12
14 Leap Pads LTB1000 Specifications Contents > 1000 Per Box Shape Size Usage > Oval > 17mm x 30mm > Nidek Edger 13
15 LTBOC1000 SUPERIOR SLIP RESISTANCE ON HYDROPHOBIC COATED LENSES IMPROVED ADHESION Specifications Contents > 1000 Per Box Shape Size Usage > Oval > 17mm x 30mm > Nidek Edger 14
16 Intermediate Tape 15
17 Blocks Pliable Cup N White Measures 30 x 17 mm N40370-M095 Green Measures 30 x 17 mm N40370-M094 Red Measures 30 x 17 mm N44031-M086 Green High Measures 30 x 17 mm Only for use with lens base curve > 6 dioptre Distinguished by serrated edge 16
18 N44031-M087 Red High Measures 30 x 17 mm Only for use with lens base curve > 6 dioptre Distinguished by serrated edge Pliable Cup Nano N44031-M095 Green Measures 18 x 13.5 mm N44031-M094 Red Measures 18 x 13.5 mm Pliable Cup Supporter N44031-M093 Measures 30 x 17 mm 17
19 Full Eye N41260-M001 Measures 25 mm Half Eye Cup N40370-M061 Measures 20 x 17 mm N40370-M066 Blue Measures 20 x 17 mm For use with lens < 2 dioptre base curve N40370-M068 Pink Measures 20 x 17 mm For use with lens > 6 dioptre base curve 18
20 Cup Holder & Lens Retainer LE9000 (all series), ME1000, SE9090 (all series) N Holder N Retainer N Flexible Retainer 19
21 LE1000 (all series), LEX1000 & ME1200 N Holder N Retainer N Flexible Retainer 20
22 Pliable Cup Remover N Edger Drain Pipe 50mm Internal Diameter or 75mm Internal Diameter 21
23 LFU220 FILTERS N Packet Of 5 N Packet Of 30 22
24 Frame Heater Fata GFCA4000/WH Horizontal No Heating Regulation White Fata Plus GFCA4000P/WH Horizontal Heating Regulation Cold Air White Maga GFC200S Hi low temp control Variable fan speed control & cooling function Air concentrator included 23
25 Hygienic Box GFCA Utilizes wavelength of 253,7nm of UV-C light to destroy bacteria, germs, spores & mould Pupillo GFCA3200 Incline adjuster to suite operators needs Identifies manufacturer initials Power of progressive lenses Traces the progressive lens 24
26 UV TESTER Testerpi GFC801 Checks photochromic absorption Tests sunglass optical quality Stress tests on mounted lenses Tests for UV protection 25
HEAD OFFICE TOKYO OFFICE NIDEK INC. NIDEK S.A. NIDEK TECHNOLOGIES
Multifunction edger Multifunction edger The ME-1000 DESIGN+ Lens Edger, which had ushered in a new era of lens finishing as the world's first automatic 3D drilling edger, has been totally redesigned from
More informationMultifunction edger Me /
Multifunction edger Me 1200 /900 Multifunction edger Me 1200 The ME-1000 DESIGN+ Lens Edger, which had ushered in a new era of lens finishing as the world's first automatic 3-D drilling edger, has been
More informationEdging Station LE-700
Edging Station Simple, built-in intelligent blocker Simple, accurate blocking The built-in intelligent manual blocker enables the operator to achieve accurate blocking with simple operation. Precise alignment
More informationMultifunction Edger ME-1000 DESIGN+ / ME-1000
Multifunction Edger ME-1000 DESIGN+ / ME-1000 Multifunction Edger ME-1000 DESIGN+ / ME-1000 Beyond the limits of Lens Edger Standards Automatic 3D Drilling The ME-1000 series offers drilling with flexible
More informationSpares & Consumables Catalogue 2015
Reg. No.: 1946/023292/07 (PTY) LTD Spares & Consumables Catalogue 2015 PO Box 101508, Moreleta Plaza, 0167 Tel: 012 993 5797 Fax: 086 550 3785 E-mail: info@intras.co.za www.intras.co.za Description Page
More informationPatternless Edger LE-1200
Patternless Edger Patternless Edger A new standard is born The NIDEK patternless edger LE series was born from the trusted, symbolic relationship with optical professionals and quickly grew to be the industry
More informationLex. Lens Edging System. Lex Specifications Model Grinding system Tracer Mode
Lex Specifications Model Grinding system Tracer Mode Grinding Size Flat edging Bevel edging Hi-curve bevel edging Flat chamfering Bevel chamfering Grooving Wheel configuration Water supply system Power
More informationCENTERING DEVICE. Model CE-9 OPERATOR S MANUAL
CENTERING DEVICE Model CE-9 OPERATOR S MANUAL NIDEK CO., LTD. : 34-14, Maehama, Hiroishi-cho, Gamagori, Aichi 443-0038, Japan (Manufacturer) Telephone: (81-533) 67-6611 Facsimile: (81-533) 67-6610 NIDEK
More information1. Descriptive diagrams 10. a. Tracer 10 b. Edger First use of the digital system 14
User Manual USER MANUAL CONTENTS CONTENTS INTRODUCTION 7 I. FIRST STEPS 9 1. Descriptive diagrams 10 a. Tracer 10 b. Edger 12 2. First use of the digital system 14 a. Switching on the digital system 14
More informationVarious configurations are made possible with NIDEK's Lab Equipment --- SE-9090 Express, AHM-1000 and RHU-1000/1500.
NIDEK Lab Edging Systems Comprehensive Solutions Automation Complete Automation & Lens Processing Various configurations are made possible with NIDEK's Lab Equipment --- SE-9090 Express, AHM-1000 and RHU-1000/1500.
More informationDia Lens Finishing Products & Accessories. The best solutions for your finishing laboratory. solutions
Dia Lens Finishing Products & Accessories The best solutions for your finishing laboratory solutions For simple and precise rimless drill mounts DigiDrillDM-50 Rimless Lens Drill The best solution for
More informationwww.coburntechnologies.com INISHING EDGERS BLOCKERS TRACERS LENSMETERS HPE-8000X Lens Edger Step Bevel Semi-U Bevel Asymmetric Bevel Hybrid Groove & Bevel Combined Mini Bevel Standard Bevel Standard Groove
More informationCOMPLETE S YSTEM SHELTER
COMPLETE S YSTEM SHELTER The weather-resistant Complete System Shelter (CSS) provides protection from the elements for system components such as the console, Solar Power Kit components, sensor interface
More informationLARGE S URGE-PROTECTOR S HELTER
LARGE S URGE-PROTECTOR S HELTER The weather-resistant Large Surge-Protector Shelter (simply referred to as the shelter in this manual) provides protection from the elements for Surge Protectors (not included)
More informationConstructing a Newtonian Achromatic Refracting Telescope Dr. Larry Browning, SDSU Physics Department
Constructing a Newtonian Achromatic Refracting Telescope Dr. Larry Browning, SDSU Physics Department These are plans to construct a Newtonian achromatic refractor telescope with a 70-mm aperture and an
More informationUser Manual. Binocular Zoom Stereo Microscope with Boom Stand. MicroscopeNet.com
User Manual Binocular Stereo Microscope with Boom Stand Model W42C1 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 1 1. Component Illustration... 2 2. Installation...3
More informationSpeed of light E Introduction
Notice: All measurements and calculated values must be presented with SI units with an appropriate number of significant digits. Uncertainties required only when explicitly asked for. 1.0 Introduction
More informationSmall Equipment and Consumables Guide. Specifically designed, developed and tested to enhance lifetime and performance
Small and Consumables Guide Specifically designed, developed and tested to enhance lifetime and performance EDGING PADS GAM 222 GAM 218 GAM 216 GAM 202 GAM 203 GAM 403 Ø 22 mm Roll of 1000 GAM 316 Ø 18/14
More informationSmall Equipment and Consumables Guide. Specifically designed, developed and tested to enhance lifetime and performance
Small and Consumables Guide Specifically designed, developed and tested to enhance lifetime and performance EDGING PADS GAM 222 GAM 218 GAM 216 GAM 202 GAM 203 GAM 403 Ø 22 mm Roll of 1000 GAM 316 Ø 18/14
More informationCommBox Interactive Table User Manual 1.0. Revision: 5
CommBox Interactive Table User Manual 1.0 Revision: 5 Table of Contents 1 Introduction 3 1.1 Table Assembly Components 3 1.2 Accessories 3 2 Table Assembly Procedure 4 2.1 Step 1 4 2.2 Step 2 5 2.3 Step
More informationAssembly Guide T9200, T9500, T9600, AND T9700 PLATFORM TREADMILLS
Assembly Guide T9200, T9500, T9600, AND T9700 PLATFORM TREADMILLS Assembly Guide T9200, T9500, T9600, AND T9700 PLATFORM TREADMILLS To avoid possible damage to this Platform Treadmill, please follow these
More informationOphthalmic Microscope Series
SO-5000 SERIES optics for life Ophthalmic Series New digital technology. A fully integrated series of microscopes - choose the microscope that best suits you. Table and floor stand mounted microscopes.
More informationFriction & Roughness Measurement of Elastomer
Friction & Roughness Measurement of Elastomer Prepared by Jorge Ramirez 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2010 NANOVEA
More informationACCESSORIES AND CONSUMABLES CATALOGUE FOR CONTACT LENS LABORATORIES
PRECISION OPTICAL MATERIALS ACCESSORIES AND CONSUMABLES CATALOGUE FOR CONTACT LENS LABORATORIES Vista Optics Limited Cheshire Science Centre Gorsey Lane Widnes Cheshire WA8 0RP United Kingdom Tel. +44
More informationRING LIGHT. LED Strobe Indicator ON = Light Active Green Indicator LED
R80 Series RING LIGHT product introduction The all metal construction of the Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector
More informationF 2 Overview: Nose Pads F 14 Tips & Tricks: Nose Pad Arms F 16 Nose Pad Arms F 18 Nose Pad Cushions F 20 Overview: Screws and Nuts F 44 Washers and
2 Overview: Nose Pads 14 Tips & Tricks: Nose Pad Arms 16 Nose Pad Arms 18 Nose Pad Cushions 20 Overview: Screws and Nuts 44 Washers and Sleeves 48 Hinges 52 Temple Ends 60 Tips & Tricks: Sports Temple
More informationPLANO SUN LENSES. Part of your daily life
PLANO SUN LENSES 2018 Part of your daily life PLAN0 LENSES CHOOSE THE RIGHT PLANO LENSES FOR YOUR USE DESCRIPTION OF TERMS USED IN THIS CHAPTER: MATERIAL Triacetate (TAC) CR 9 Polycarbonate (PC) TINT LENS
More informationLaserMatrix. Series 2400 Laser Printers Replacement Parts Catalog
LaserMatrix Series 2400 Laser Printers Replacement Parts Catalog COPYRIGHT 996, OUTPUT TECHNOLOGY CORPORATION All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced,
More informationSHOOTING GLASSES & ACCESSORIES 2015
SHOOTING GLASSES & ACCESSORIES 2015 P O Box 101508, Moreleta Plaza, 0167 Tel: 012 993 5797 Fax: 086 550 3785 www.intras.co.za E-mail: intras@icon.co.za Page 2 of 9 Model K1 Ref 1040 Top-range shooting
More informationTykoflex cold method. A safe, simple and proven cold method TYKOFLEX COLD METHOD
Tykoflex cold method A safe, simple and proven cold method TYKOFLEX COLD METHOD Our new cold compression method Tykoflex cold compression method has bushings for micro cables in the size range of Ø.8-9.5
More informationDiscontinued. RoHS Compliant. Product Overview. Features
Product Overview An electrically isolated star capable of delivering over 140 lumens per LED, the Star K2 offers greater application capabilities because of its size and ease of integration into fixtures
More informationBGA IRDA-WELDER User Manual. Model: T870A
BGA IRDA-WELDER Model: T870A 0 CATALOGUE Features....2 Technical Parameter and Components..3 T-870A illustrated explaining...4 (1)The whole machine 4 (2)Front panel.. 5 (3)Rear panel.. 5 (4)Focus holder
More informationRSL PSM-2 Power Supply Module Project: Modifying a FlatCap2
RSL PSM-2 Power Supply Module Project: Modifying a FlatCap2 Dear Do-It-Yourselfer, The stock FlatCap2 is less than a stellar performer. Used with a CD5 CD player, for example, it gives flabby bass control,
More informationRequired Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.
IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [
More information1. Prerequisites 8 2. Prepare the Chemistrie TM lenses 9 3. Perform a Chemistrie TM job 10
User manual USER MANUAL CONTENTS CONTENTS MR BLUE SUN & SPORT EDITION 5 I. PERFORM A CHEMISTRIE TM JOB 7 1. Prerequisites 8 2. Prepare the Chemistrie TM lenses 9 3. Perform a Chemistrie TM job 10 II. CARRY
More informationGLAZING INSTRUCTIONS OPTICAL SUNGLASSES SUN 2012
GLAZING INSTRUCTIONS OPTICAL SUNGLASSES SUN 2012 1. Glazing Possibilities Max. lens thickness at the drill hole = 6,5 mm depending on the length of the BLS Min. lens thickness at the drill hole = 2,0 mm
More informationenglish Magnifiers Dissection Instruments Accessories for Microscopy
english Magnifiers Dissection Instruments Accessories for Microscopy Magnifiers Hand-held magnifiers and magnifiers with handles PB.5020 PB.5021 PB.5022 PB.5026 Magnifier with handle 4x, lens Ø 50 mm,
More informationFree-Standing Type 12 Enclosures
Type 12 Enclosures Application Designed to protect electrical and electronic controls, components, and instruments in typical industrial environments. The UL Type 12 rating protects enclosed equipment
More informationOverview of WT&T LED light sources (fiber-coupled and free-space) WT&T Inc. Contact:
Overview of WT&T LED light sources (fiber-coupled and free-space) WT&T Inc. Contact: sales@wttechnology.com 2005-2015 WT&T Inc, all rights reserved Compact, high power, single channel fiber-coupled LED
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationUNIQUE DESIGN FEATURES
LIGHTING SYSTEM UNIQUE DESIGN FEATURES POWERITE The provides a totally new concept in Underwater Pool/Spa and Aquatic Landscape Lighting Design. Utilizing new technology moulding materials it has been
More informationHIGH BAY PASSIVE INFRARED OCCUPANCY SENSOR HB3X0-LX SERIES
WATTSTOPPER FIXTURE SENSORS & CONTROLS HIGH BAY SENSORS HIGH BAY PASSIVE INFRARED OCCUPANCY SENSOR HB3X-LX SERIES Integrated occupancy sensor and lens device Lens choices for mounting between -4 feet Line
More informationUser instructions Stereo microscope
User instructions Stereo microscope KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-mail: info@kern-sohn.com Tel: +49-[0]7433-9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com KERN OSE-4 OSE
More informationCHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Part number nomenclature. 4 Ordering part number and flux spec... 5 Operating
More informationInstalling the Server into a Rack
Installing the Server into a Rack Note These instructions apply to multiple models; illustrations may vary slightly. Rack Mount Kit Inventory Before installing the chassis on a standard 4-post rack, make
More information3D SYSTEMS University CubeX 3D Printer
3D SYSTEMS University CubeX 3D Printer Lesson Leveling the Print Pad and Print Tips, Setting the Z-Gap Revision date: 10/22/13 1 1 2016 年 6 月 14 日 Objectives After completing this lesson you will: Be able
More informationCAMERA ASSEMBLY. Removal/Replacement of the Camera Box Assembly APR-CA. Install Camera Assembly. Remove Camera Assembly
CAMERA ASSEMBLY Removal/Replacement of the Camera Box Assembly APR-CA REQUIRED TOOLS: 9/64 hex key Small flat-tip screwdriver Remove Camera Assembly camera 1. Locate the camera assembly underneath the
More informationL880E. Slit lamps L880E. 5 steps magnification microscope with achromatic optics REF
Slit lamps L880E 5 steps magnification microscope with achromatic optics REF 7460034 The 5 steps magnification microscope with achromatic optics gives sharp and grips images. Clearness > The five primary
More informationA-100G6 - Basic frame assembly diagram
doepfer System A - 100 Rack system A-100 G A-100G6 - Basic frame assembly diagram Parts: 1 Rail with lip, and with tapped hole strip inserted (with M3 threads). 2 Rail with lip, with three M3 hexagon nuts
More informationBriot emotion SAVE 3,000 *
MASSIVE SAVINGS OPHTHALMIC INSTRUMENTS Briot emotion The all new 4 in 1 edging/blocking solution from Briot FREE PLM- 6100 3,000 * 4 GOOD REASONS TO BUY NOW... 1. Save 3,000* by trading in your old edger
More information1. Move the cardboard carton close to the installation site, making sure you have adequate space to remove all the contents of the box.
Install the vedge 1000 Router Once you have prepared your site for router installation, unpack the vedge 1000 router. If you plan to install the router in a 19-inch rack, unpack the rack-mount kit as well
More informationIndividual Lens Range
Individual Lens Range wellnessprotect system INDIVIDUAL Product information Product range WIDE-RANGING CHOICE FOR YOUR CUSTOMERS Discover the eyewear portfolio from Eschenbach Optik, which offers customers
More informationLaser Alignment. For the Epilog Fusion CO2 10/10/2013
EPILOG LASER 16371 Table Mountain Parkway Golden, Colorado 80403 Phone 303-215-9171 FAX 303-277-9669 www.epiloglaser.com For the Epilog 10/10/2013 Requirements: Tools: 5/32 Allan Wrench 3/32 Allan Wrench
More informationPRODUCT DATASHEET Leila series last update 2/1/2013
PRODUCT DATASHEET Leila series last update 2/1/2013 Ordering number FA11937_LXM-RS Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Leila Assembly XM-L2 Black
More informationPage. Foreword. We sincerely hope that you enjoy using our product! P2 - INDEX
Page 2... Index, Foreword 3... Product Overview 4... Preparation for Assembly 5-6... Installing the Motherboard 7... Installing the Passive CPU Cooler 8... Fitting the HDD/ODD 9... PCB Wiring Diagram 10...
More informationCary Fiber Optic Probes
Cary Fiber Optic Probes Fiber Optic Probes Use With Cary 50/60 Wavelength range 200-1100 nm Cary 100/300 Cary 50/60/100/300 Cary 4000/5000/6000i Fiber optic dip probe stainless steel body only Requires
More informationZEISS Compact Prime CP.3 and CP.3 XD Mount Change Instructions
ZEISS Compact Prime CP.3 and CP.3 XD Mount Change Instructions Table of Contents Introduction 3 Explanation of Symbols 3 Overview 4 Delivery Contents of a ZEISS CP.3 and CP.3 XD 4 Technical Data 5 Changing
More informationMacBook Core 2 Duo Clutch Cover
MacBook Core 2 Duo Clutch Cover Replacement Replace the clutch cover on your MacBook Core 2 Duo. Written By: Ben Eisenman ifixit CC BY-NC-SA www.ifixit.com Page 1 of 29 INTRODUCTION Replace the curved
More informationRCC45 ➁ Overview / /
RCC45 ➁ Overview 010.2936 More future and modularity Integration of POF and power Guaranteed modularity Long-term investment protection Flexible cabling solution Fast and convenient installation 1 010.2721
More informationRING LIGHT. ON = Light Rest (LED inactive) OFF = LED/Light Ready Green Indicator LED
product introduction ODR130-16 Series RING LIGHT OverDrive The ODR130-16 Series ring light features an Overdrive driver with NPN or PNP signal options. The all metal construction of the Ring Light Series
More informationGeneration 3 CIM-9 COB Arrays White LED
Preliminary Generation 3 CIM-9 COB Arrays White LED Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering & Shipping Part Number
More informationEDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM
GAIN 0 Instruction Manual and Experiment Guide for the PASCO scientific Model OS-8537 and OS-8539 02-06575A 3/98 EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM CI-6604A
More informationThe Eye Com 7000 Dual Page Reader Operating and Maintenance Instructions
A MEDIA INDEPENDENT DOCUMENT MANAGEMENT COMPANY EYE COMMUNICATION SYSTEMS, INC. 455 E. Industrial Drive P.O. Box 620 Hartland, WI 53029 USA (262) 367-1360 or (800) 558-2153 Fax: (262) 367-1362 www.eyecom.com
More informationGeneration 3 CXM-9 COB Arrays White LED
Generation 3 CXM-9 COB Arrays White LED Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering & Shipping Part Number nomenclature.4
More informationGeneration 3 CLM-14 COB Arrays White LED
Generation 3 CLM-14 COB Arrays White LED Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering & Shipping Part Numbers..............4
More informationBIOLOGICAL MICROSCOPE
BIOLOGICAL MICROSCOPE Instruction Manual LBM-102 B "Please read this manual carefully before using the instrument" Labnics Equipment Thank You for Buying a LABNICS BIOLOGICAL MICROSCOPE! For your personal
More informationA modular system that may be customized for orthognathic procedures
A modular system that may be customized for orthognathic procedures Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF Orthognathic Modular Fixation System
More informationGeneration 3 CXM-14 COB Arrays White LED
Generation 3 CXM-14 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Customer Part Numbers...5
More informationSafety frames. All safety frames are certified according to DIN EN Glazeable clip available for some frames. Large range of side protection
QUALITY MADE Safety frames All safety frames are certified according to DIN EN 1 18 Glazeable clip available for some frames Large range of side protection GENERAL INFORMATION ON SAFETY GLASSES AND CLIP-ONS
More informationRapid LED NanoCube 28 CF Quad Aurora Array Retrofit
1 Rapid LED NanoCube 28 CF Quad Aurora Array Retrofit Contents Foreword... 1 Outline... 2 Hood Preparation... 2 Aurora LED Array Specifications... 6 Wiring the Aurora Puck... 6 Wiring the Aurora LED Array
More informationCreative Calibration Centre, Plot No.-3802, Laxman Vihar, Phase-I, Gurgaon, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 21.07.2015 Page 1 of 10 I. DIMENSION 1. HEIGHT GAUGE $ (Digital/Dial/Vernier) L.C: 0.01 mm Φ 0 to 300 mm 0 to 600 mm 8.1 µm 12 µm Using Slip Gauge Blocks & Accessories & Caliper Checker
More informationGeneration 3 CXM-11 LED White COB Arrays
CXM-11 Gen 3 Product Datasheet Generation 3 CXM-11 LED White COB Arrays Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering
More informationD-SCOPE The indispensable analysis tool for all diamonds
www.hrdantwerp.be D-SCOPE The indispensable analysis tool for all diamonds The indispensable analysis tool for all diamonds HRD Antwerp has a long experience in research, examination and grading of diamonds.
More informationUpgrade Instructions. P/N Revision A. October Printer Terminal Holder * *
Upgrade Instructions P/N 96-08-0 Revision A October 000 480 Printer Terminal Holder P/N 96-08-0 Revision A *96080* Instructions This terminal holder connects the INTERMEC R 600 Series and 700 Series Computers
More informationMac Mini Mid 2010 SSD Installation
Mac Mini Mid 2010 SSD Installation Replace your Mac Mini Mid 2010's hard drive for more storage space and an increase in speed. Written By: Dozuki System 2017 guides.crucial.com Page 1 of 15 INTRODUCTION
More informationVJ-1618 INSTALLATION MANUAL
Please read this manual before using Thank you for purchasing a MUTOH product. This manual explains the steps for unpacking, mounting and basic installation before using the MUTOH Full-color inkjet printer
More informationUser Manual. Trinocular Stereo Microscope
User Manual Trinocular Stereo Microscope Model V436 XV436 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 1 1. Component Illustration... 2 2. Installation 3 3. Operation....4
More informationKeysight M8000 Series BER Test Solutions
Keysight M8000 Series BER Test Solutions J-BERT M8020A High-Performance BERT M8030A Multi-Channel BERT M8040A High-Performance BERT M8041A, M8051A, M8061A, M8062A, M8045A, M8046A & M8057A Tips for Preventing
More informationPage
Page 2... 3... 4... 5-6... 7-8... 9... 10... 11-12... 13... 14... 15... Index, Foreword Product Overview Preparation for Assembly Installing the Motherboard Installing the Passive CPU Cooler Installing
More information1. Descriptive diagrams 8 2. Using the edger 10
User Manual USER MANUAL CONTENTS CONTENTS INTRODUCTION 5 I. FIRST STEPS 7 1. Descriptive diagrams 8 2. Using the edger 10 a. Turning on the edger 10 b. Switching off off the edger 10 c. Using the touch
More informationLow and Medium Capacity Fiber Optic Splice Cases
Low and Medium Capacity Fiber Optic Splice Cases Channell Commercial Corporation manufactures a full range of fiber optic closures for voice, data and broadband requirements. To accommodate the ever increasing
More informationDell Wyse Client VESA Mounting Bracket for Dell P Series Monitor Installation Instructions
Dell Wyse Client VESA Mounting Bracket for Dell P Series Monitor Installation Instructions This VESA mounting bracket (P bracket) is used for mounting a Wyse client to the Dell P Series Monitor or the
More informationContents AGFA MSC
Contents Contents Color Printer...1.1 General...1.1 Tools...1.1 Lens Carrier...1.2 Changing the Zoom...1.2 Focusing...1.2 Adjustment of the Zoom position...1.3 Adjustment of the fixed focus lens position...1.4
More information**** Never plug in your LED driver to AC power until all wiring is complete ****
1 RapidLED Plug-n-Play Solderless Retrofit Kit Contents Overview... 1 Warnings Read Me First!... 1 Dimmable Driver Controller and Driver Output Current Adjustment... 2 Kit Assembly... 2 Attaching Your
More informationRANGE SUMMARY OF RITEL PRODUCTS, AS SUPPLIED BY ELLMAX ELECTRONICS LTD., LONDON
Ellmax Electronics Ltd Unit 29 Leyton Business Centre Etloe Road, Leyton, London, E10 7BT Tel: 020 8539 0136 Fax: 020 8539 7746 Email: ellmaxelec@aol.com Web: www.ellmaxelec.com Ritel s range of quality
More informationFLEXPOINT Laser Modules. Laser Modules For Your Application. laser-components.com
FLEXPOINT Laser Modules Laser Modules For Your Application laser-components.com Get in Contact LASER COMPONENTS USA, Inc. 116 South River Road, Building C Bedford, NH 03110 / USA www.laser-components.com
More informationLaserLyte-Flex Red & Green Alignment System
LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly
More informationPARTS LIST NX64 / NX84 SERIES NXA64 / NXA84 SERIES
PARTS LIST NX6 / NX8 SERIES NXA6 / NXA8 SERIES PART NO. 66 NORCOLD 6//205 UPPER DOOR (FREEZER) - NX6/NXA6/NX8/NXA8 SERIES 9 0 2 7 8 6 5 Art026 NO. PART # DESCRIPTION NX6 NXA6 NX8 NXA8 65668 HINGE-FLAT
More informationUser Manual. Revision B
User Manual TM Revision B Copyright 2014 Electronic Theatre Controls, Inc. All Rights reserved. Product information and specifications subject to change. Part Number: 7063M1220 Rev B Released: 2014-07
More informationCryoFocus-4 GC Cryogenic Trap
CryoFocus-4 GC Cryogenic Trap Installation Guide CryoFocus-4 onto Shimadzu GC-2010 www.atasgl.com Disclaimer ATAS GL International B.V. makes no representations or warranties with respect to the contents
More informationLens Edging Product Guide
Lens Edging Product Guide Perfection of technology Lens edger history The history of NIDEK lens edgers has begun in 1988, launching the Profile S. Over the past 25 years, technology has been improved dramatically
More informationGeneration 3 CXM-14 COB Arrays White LED
Generation 3 CXM-14 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Customer Part Numbers...5
More informationSTORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
More informationIntroduction CLASS 1 LED PRODUCT
Introduction Thank you for purchasing a set of FlightLights, a high performance LED system for model aircraft designed and manufactured by BrainCube Aeromodels Ltd. This manual will describe how to safely
More informationInstruction Manual. Version 1.2
Instruction Manual Version 1.2 Elation Professional 4295 Charter Street Los Angels CA 90058 e-mail: info@elationlighting.com Web site: www.elationlighting.com (V1.2) 2 Contents 1 Introduction...5 1.1 Safety
More informationA perfectly balanced concentrate of energies.
Mr Orange Born to raise standards. You gained a lot from the Kappa generation. Mr Orange will bring you even more. More integrated functions such as optical tracing and management of base 9 in all finishes.
More informationGeneration 3 CXM-27 COB Arrays White LED
Generation 3 CXM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux
More informationPARTS LIST N7/N8 POLAR SERIES N7V N7VF N7X N7XF N7LX NA7LXIM N7LX.3 N7LX.3F NA7LX NA7LXF NA7LX.3
PARTS LIST N7/N8 POLAR SERIES N7V N7VF N7X N7XF N7LX NA7LXIM N7LX. N7LX.F NA7LX NA7LXF NA7LX. N8V N8VF N8X N8XF N8XC N8XCF N8LX N8LXF N8LXIM N8LXIMF N8LX. NA8LX NA8LXF F NA8LX. PART NO. 697 NORCOLD //08
More informationLED-Strip B12. Product Sheet
LED-Strip B12 Product Sheet schnick-schnack-systems Introduction features System compatible with other series from Schnick-Schnack-Systems Free patch, colour change and scroll text control software Made
More informationEPILOG LASER Table Mountain Parkway Golden, Colorado Phone FAX
EPILOG LASER 16371 Table Mountain Parkway Golden, Colorado 80403 Phone 303-277-1188 - FAX 303-277-9669 www.epiloglaser.com Procedure Title: Replacing the Optics in your FiberMark Laser Engraver Tools Needed:
More information