PAR Series SPECIFICATIONS. Source Four PAR MCM. Connector Designation Use Suffixes below to specify Factory Fitted Connector type

Transcription

1 SPECIFICATIONS PHSICAL Rugged die cast aluminum construction Tool free access to the reflector and lens High impact, thermally insulated knobs Sealed reflector housing Reflector temperature control through integral heat sink fins Gel frame holders with two accessory slots Top mounted, gel frame retainer Steel yoke with two mounting positions Positive locking yoke clutch UL and cul Listed ELECTRICAL V, 5/6Hz High temperature three-conductor 36 leads in a glass fiber outer sleeve Supports ETC Dimmer Doubling technology LAMP HPL compact tungsten filament contained in a krypton/ xenon-filled quartz envelope (see table for suitable lamp types) 575W maximum Patented filament geometry makes for extremely efficient light collection and transmission Integral die cast aluminum heat sink lamp base LENSES Four heat resistant, molded borosilicate glass lenses supplied with each unit: Very Narrow Spot (VNSP), Narrow Spot (NSP), Medium Flood (MFL) and Wide Flood (WFL). Round beam for VNSP and NSP, oblong beam shape for MFL and WFL Optional Extra Wide Flood lens (WFL) also available Tool free lens changing Thermally insulated lens ring Specifications OPTICAL Modified parabolic and multifaceted reflector Computer designed reflector facets molded directly into heat sink casting, finished with an metal cold mirror, dichroic coating Cold mirror, dichroic coating removes 9% heat from beam for cooler stage environment Enhanced Aluminum (EA) also available Ordering information Source Four PAR MCM Model PAR-MCM PAR-MCM-1 Description Source Four PAR Metal Cold Mirror (Black) Source Four PAR Metal Cold Mirror (White) ETC Source Four PAR MCM are supplied with 4 lens set: VNSP, NSP, MFL, WFL; color frame and 3 (96cm) lead as standard Connector Designation Use Suffixes below to specify Factory Fitted Connector type Model A B C M Description Parallel-blade U-ground connector Two-pin and ground, 2 amp connector Grounded, 2 amp, twistlock connector Dimmer Doubling Connector (NEMA L515P) See back page for Source Four PAR Accessories 1 of 6

2 photometrics Photometric data below is measured with an HPL 575W/115V 3 hr lamp. To convert data when using any other HPL lamp, use the lumen or candela multiplying factors ( or ) for that specific lamp. These multiplying factors are listed in the Lamps table in this datasheet. For lumen data, multiply by the. For candela or footcandle data, multiply by the. Source Four PAR MCM with VNSP lens VNSP 343,44 7,798 4, % 13.6 For diameter at any distance, multiply distance by.27 For diameter at any distance, multiply distance by.14 Source Four PAR MCM with NSP lens NSP 297,851 7,997 4, % 13.9 For diameter at any distance, multiply distance by.28 For diameter at any distance, multiply distance by Angle 9 16 Angle Throw Distance (d) 3 9.1m m m m m m m m Illuminance (fc) Illuminance (lux) 4,18 1, Throw Distance (d) m m m m m m m m Illuminance (fc) Illuminance (lux) 5,13 1, % 1% 5% 5% Plot 35 Plot of 6

3 Metric Conversions: For Meters multiply feet by.348 For Lux multiply footcandles by 1.76 photometrics Source Four PAR MCM with MFL lens Source Four PAR MCM with WFL lens MFL 14,78 8,151 4, % 14.2 For diameter at any distance, multiply distance by.41v /.56H For diameter at any distance, multiply distance by.22v /.33H WFL 34,656 7,628 4, % 13.3 For diameter at any distance, multiply distance by.68v /.98H For diameter at any distance, multiply distance by.36v /.57H 13 Vertical 19 Horizontal 23 Vertical 31 Horizontal Angle 2 Vertical 32 Horizontal 37 Vertical 52 Horizontal Angle Throw Distance (d) m m m m Throw Distance (d) m m m m 6.1 / m/2.5m 1.2 / m/4.2m 16.3 / m/6.8m 2.4 / m/8.5m 5.4 / m/2.4m 1.8 / m/4.8m 16.3 / m/7.2m 2.3 / m/9.m Illuminance (fc) Illuminance (lux) 5,9 1, Illuminance (fc) Illuminance (lux) 5,829 1, % 1% 5% 5% 12 Plot 4 Plot Complete IES photometry data files (LM-63-2 format) may be downloaded from the ETC website. Go to 3 of 6

4 Lamps To determine (Cd) or (Lm) for any other HPL lamp, multiply the or Lumen value by the appropriate multiplying factor (CdMF or LmMF) shown for that lamp in the table below. ETC Part # Lamp Code Watts Volts Initial Color Temp. K Avg. Rated Life VNSP VNSP NSP NSP MFL MFL WFL WFL RT113 HPL 575/115** ,52 3, RT114 HPL 575/ ,36 3,5 2, RT142 HPL 375/ ,54 3, RT143 HPL 375/ ,5 3,5 1, RT115 HPL 575/ ,52 3, RT171 HPL 575/ ,36 3,5 2, RT112 HPL 55/77* ,17 3, RT117 HPL 55/77* ,16 3,5 2, RT129 HPL 575/23** ,9 3, RT138 HPL 575/ ,78 3,5 1, RT154 HPL 375/ ,8 3,5 1, RT13 HPL 575/ ,9 3, RT139 HPL 575/ ,78 3,5 1, RT155 HPL 375/ ,8 3,5 1, Source Four PAR MCM is rated for 575W maximum. *77 Volt HPL lamps are for use with ETC Dimmer Doubling technlology only. **Photometric data was prepared using a production fixture and the Prometric CCD measurement system. Fixture adjusted for cosine distribution and tested with calibrated lamp at rated voltage. All data normalized to nominal lamp lumens in accordance with IES LM Testing performed at ETC West, Hollywood, CA. All other multiplying factors extrapolated from primary test data. For links to photometry file downloads (IES LM-63-2 format) go to HPL Specified Tolerances: Watts +/- 5%, +/-7%, Average life +/-1%, Color Temperature +/- 5K 4 of 6

5 physical Ordering information Continued from front page mm mm mm Source Four PAR Accessories Model 47CF 4SC 4CC 4 VNSP 4 NSP 4 MFL 4 WFL Description Color frame (7.5 ) (included) Safety Cable C-Clamp Very Narrow Spot lens Narrow Spot lens Medium Flood lens Wide Flood lens 4 LS4 Set of four Source Four PAR lenses (VNSP, NSP, MFL, WFL) 4-WFL Extra Wide Flood lens (optional - not included with fixture) 4PTH3 Top hat, 3 4PTH6 Top hat, 6 4PHH Half hat 4BTH Cross baffle top hat 4PGE3 Gel extender, 3 4PGE6 Gel extender, 6 4BD Barn door 4L Egg crate louver 4WB Weighted base mm Note: For colors other than black and white, please call ETC mm mm Source Four PAR Weights * model weight shipping weight lbs kgs lbs kgs S4PAR-MCM Source Four products are protected by one or more of the following patents: U.S. USRE36,3316, US5,345,371, US5,446,637, US5,544,29, US6,92,914 and US5,775,799 U.K. GB592589, GB673488, * Germany DE592589, GB673488, * Japan JP2,51,772 * European patent application number *Add 2.3 lbs for C-clamp 5 of 6

6 Corporate Headquarters 331 Pleasant View Rd, PO Box 62979, Middleton WI USA Tel Fax London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 () Fax +44 () Rome, IT Via Ennio Quirino Visconti, 11, 193 Rome, Italy Tel +39 (6) Fax +39 (6) Holzkirchen, DE Ohmstrasse 3, 8367 Holzkirchen, Germany Tel +49 (8 24) 47 - Fax +49 (8 24) 47-3 Hong Kong Room 181, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung uet Road, Kowloon Bay, Kowloon, Hong Kong Tel Fax Web Copyright 28 ETC. All Rights Reserved. All product information and specifications subject to change. 761L15 Rev. F Printed in USA 2/8 6 of 6