ST4 AIR SERIES ST5 OIL SERIES MEDIUM DUTY HYDRAULIC & HEAVY DUTY PNEUMATIC

Size: px
Start display at page:

Download "ST4 AIR SERIES ST5 OIL SERIES MEDIUM DUTY HYDRAULIC & HEAVY DUTY PNEUMATIC"

Transcription

1 MDIUM DUT HDRULIC & HV DUT PNUMTIC ST IR SRIS ST5 OIL SRIS ST5 - HDRULIC MDIUM DUT SRVICS ST - PNUMTIC HV DUT SRVICS INDUSTRIL TI ROD CONSTRUCTION STNDRD OR SIZS.5 THROUH 8 PISTON ROD DIMTRS 5/8 THROUH 5-/ 0 STNDRD MOUNTIN STRNIT VIL ON VR STL PRTS

2 Cylinder Design eatures ST5 SRIS Piston Rod High Strength lloy Steel (S0). STRNIT TM (Nitrocarburation) treatment on the rod gives better corrosion-resistant properties (out performs -micron, (.0005 in.) chromium electroplating by ratio up to 0:.), Improved wear resistance, better lubrication retention, dent resistance without induction hardening (65-70Rc), environmentally friendly, no surface pitting, flaking, or hydrogen embrittlement. The finish created by the process is a lustrous black. (available up to 6 ft of stroke) (vailable in Stainless Steel) iper The Urethane wiper is designed to wipe off abrasive dust and contaminants on the retract stroke to ensure long life for the seals, rod bushing and piston rod. (temperature: -50 to 0 ) Rod lips seal Our New Design with a real rod u-cup is completely self compensating for zero leakage at all pressures (temperature: -50 to 0 ) Self Centering Cushion Spud Self centering design allows for close tolerance and min. wear. Optional at extra charge. or faster cycle time and increased productivity, maximum performance, economical, flexible for even the most demanding applications, reduces shock and machine noise, lower maintenance costs, can be supplied at head, cap or both ends. One-Piece Iron Piston (U-cup Design) Std. One piece design for maximum strength and bearing surface. naerobic adhesive is used to permanently lock and seal the piston to the rod. different styles of piston available. Piston Lip Seal (std) Lip-type low friction urethane piston seals are pressure energized and wear compensating for low friction and long life (temperature: -50 to 0 ) Piston ear Ring Nylon material is designed for low friction, and to ensure minimum wear in the cylinder s tubing in side load application. liminates metal-tometal contact. O-ring Tube nd Seals Nitrile O-ring design is pressure compensating and reusable. Pressureactuated cylinder body-to-head and cap Porting NPT ports are standard. S Straight thread O Ring Ports are optional at no extra cost. Standard port position is number. Specify if another location is needed. *ll lue seals can withstand most chemical washdown, No luorocarbon Required P

3 ST5 SRIS Cylinder Design eatures Hex. Rod nds Special and unique 6 lats Hexagonal rod end, for easy access of the rod with tools Rod land Starnite Cast iron gland is externally removable without cylinder disassembly for easy maintenance. Designed to provide maximum rod bearing. The New STRNIT Cast Iron This bushing has been designed for tough application with side load. The STRNIT Technology improves bearing resistance against wear with an hardened Layer on both parts. Precision Steel Head & Cap Precision machined Concentric with flat and parallel surfaces. Provides true aligment of tubing and rod gland. Tie rods Corrosion resistant STRNIT (Nitrocarburation), stress proof steel maintains uniform compression on tube end seals. One-Piece Iron Piston (Hi-Load Option) One piece design for maximum strength and bearing surface. naerobic adhesive is used to permanently lock and seal the piston to the rod. different styles of piston available. Piston Seal (Hi-Load Option) Compact double acting piston seal assembly designed for one piece pistons and is suitable for low to high pressure, medium to heavy duty applications. xtra Large Piston ear Ring (Hi-Load Option) Nylon material is designed for low friction, and to ensure minimum wear in the cylinder s tubing in side load application. liminates metal-tometal contact. The Cylinder ody Heavy wall steel tubing, honed to a micro finish bore. Starnite for hard layer ID, Tube ends are machined on the OD concentric with the ID. They are confined by the close tolerance machining of the head and cap which provides greater hoop strength. djustable screw for Cushion djustable loating Stepped Cushions or maximum performance economical and flexible for even the most demanding applications provides superior performance in reducing shock. Cushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. P

4 StarNite Process ST5 SRIS STRNIT The The STRNIT process improves component properties. High wear resistance, as well as excellent sliding and running properties, is obtained through STRNIT treatment. The service life of cylinders parts is extended. The finish created by the STRNIT process is a lustrous black. During the process, which takes place at 075, the metal surface is enriched with nitrogen and carbon. two part nitride layer consisting of a monophase compound layer and a diffusion layer is formed. Total depth ranges from , depending on composition of the base material and treating time. Hardness in the compound layer ranges from approximately HV 700 (60 Rc) to about HV 600 for high alloyed tools steel. s part of the salt-bath nitriding and QPQP (Quench-Polish & Quench & Polish) sequence, finish-machine parts are polished and chemically processed to produce a highly corrosion-resistant surface with a finish suitable for bearing or seal-type applications. reat concern exists in North merica community regarding many critical materials because of North merica reliance on metals that are not native to this continent. Some 9% of the chromium used here is imported (9% balance from recycling). STRNIT process provides at least a partial solution to this problem and because it is not a plating or a coating but in the steel itself the process offers superior performance. Corrosion resistance developed by the STRNIT technique out performs - micron (.0005 in.) chromium electroplating by ratio up to 0:, and 0 micron (.0008 in.) nickel plating by a factor of 8:. answer to wear, corrosion and fatigue problems NVIRONMNTLL & CONOMICLL S Surface rea Corroded (%) Corrosion Resistance valuation Test conditions; Spool Shaft, STM -7, (88h)test hours 88 h 88 h 88 h 6 h 0 Hard Chrome lectro-less Nickel Nitrotec STRNIT Chromed plated cylinders STRNIT Process on cylinders Chrome plate can flake and blister. Superior corrosion resistance. lakes and slivers will destroy seals and glands. Improved wear resistance. Loose chrome will cause massive leaking and rapid system failure. Chrome lacks dimensional uniformity. Chrome plated Vs STRNIT etter lubrication retention. Dent resistance without induction hardening. nvironmentally riendly No surface pitting, flaking, or hydrogen embrittlement. INCRSD SRVIC LI. P

5 ST5 SRIS Standard Specifications Medium Duty Service NSI/(NP) T.6.7R Specifications and Mounting Dimension Standards Standard Construction: Square Head, Tie Rod Design Nominal Pressure : 000 PSI Dependent on ore Size* Standard luid: Hydraulic Oil Standard Temperature :-0 to +0 ** ore Sizes from.5 through 8 Piston Rod Diameter from 5/8 through 5-/ See page, and or Spherical earing Mount Style ST5S. Specification & Mountings Mounting Styles: 0 standard styles at various application ratings Strokes : vailable in any practical stroke length Cushions : Optional at either end or both ends of stroke. loat Check at cap end. Rod nds :Three Standard Choices Specials to Order * See page 9 for recommended operating pressure. ** See page 5 Viton seals for higher temperature service. Tie rods Head end ST5X Tie rods Cap end ST5X Tie rods xtended oth ends ST5X Head Rectangular lange ST5 NP MX page 6 & 0 Head Square lange ST55 NP MX page 6 & 0 Cap Rectangular lange ST5 NP MX page 6 & 0 Cap Square lange ST56 NP M page 6 Side Lug ST5S NP M5 page 8 Centerline Lugs ST5S NP M page 6 Side Tap ST5S NP M6 page 8 Side nd Lugs ST5S7 NP MS page 0 & Head Trunnion ST5T NP MS page 0 & Cap Trunnion ST5T NP MS page & Intemediate ixed Trunnion ST5T NP MS7 page & Cap ixed Clevis ST5P NP MT page & 6 Cap Detachable Clevis ST5P NP MT page & 6 Head Rectangular Mount ST55 NP MT page & 6 Head Square Lange ST5 NP MP page 6 & Cap Square Lange ST5 NP MP page 6 Double Rod Cylinders ST5D NP M5 page 8 NP M page 0 NP M page 0 page 8 P 5

6 Tie Rod and Rectangular lange Mountings / to 6 ore Sizes Tie Rods xtended Style ST5X (NP Style MX) ST5 SRIS Z + STRO P + STRO L + STRO DD ROD DI R Style ST5X (NP MX) Head Tie Rods xtended, illustrated: Style ST5X (NP MX), Cap Tie Rods xtended; and Style ST5X (NP MX), oth nds Tie Rods xtended are also available. ll ST5X styles can be dimensioned from Style ST5X drawing at right. asic Mounting ST5X0 NP MX0 no tie rods extended can be supplied upon request. Head Rectangular lange Style ST5 (NP Style M) ore Size Max PSI Push* Rod SIze 5/8 /8 / / / / Rod size ore / / Z + STRO P + STRO L + STRO ROD DI HOLS T U R * Maximum pressure rating push application. Cap Rectangular lange Style ST5 (NP Style M) HOLS Z + STRO P + STRO L + STRO Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP ROD DI R T U V C V C V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P 6

7 ST5 SRIS Table nvelope and Mounting Dimensions OR DD DD STRO NPT* S** R T U L P /.0 /-8 /8 6 /8 5/6 / /. / /8 /.60 /8 5/6- / /8 6 /8 /8 / 5/6.8 /8 /8 / /.0 /8 5/6- /8 6 /8 /8 / 5/6.9 7/8 5/8 //8 /8 /.90 /8 /8-6 / / 0 5/8 7/6 / / /8.76 /6 5 / 7/8 5/8.70 /8 /8-6 / / 0 5/8 7/6 / / /8. 5 7/6 6 / 7/8 5/ /6 /-0 5 / / 0 5/8 9/6 / / 7/ /8 7 5/8 5 /8 7/ /6 /-0 6 / / / 9/6 / 7/ /8 8 5/8 5 / /8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Tie Rod and Rectangular lange Mountings / to 6 ore Sizes Table Rod Dimensions OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V X Z Z / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 5/8 7/8 5 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 5/6 5 5 / 5 /8 std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 5/8 5/6 5 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 5/ /6 5 /8 /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 5/8 9/6 5 / 5 9/6 5 5/8.5 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 / 5 /6 5 /8 std 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 5/6 5 /8 5 7/6 5 / /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 5/8 9/6 5 /8 5 /6 5 / / /- /-.7 / / / /6 / / 7/8 /6 5 5/8 5 5/6 6.5 std 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 5/6 / 5 /6 5 /8 /8 /- - 5/ /8 /8 5/8 5/6 /8 5/8 /6 5 7/8 5 / 6 / / /- /-.7 / / / /6 / / 7/8 5/6 6 /8 6 / 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 6 / 6 5/8 6 7/8 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 5/6 / 5 /6 5 /8 std /8 /- - 5/ /8 /8 5/8 5/6 /8 5/8 /6 5 7/8 5 / 6 / / /- /-.7 / / / /6 / / 7/8 5/6 6 /8 6 / 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 6 / 6 5/8 6 7/8 / /- 7/8-. /6 5/8 /8 5/8 5/8 / 5/6 6 / 6 7/8 7 /8 5 7/8- /-6 /8.98 / 7/8 7/8 5/6 / / /8 7/6 5 7/8 6 5/6 6 / /8 /- - 5/ /8 /8 5/8 5/6 /8 5/8 /6 6 /8 6 9/6 6 / std / /- /-.7 / / / /6 / / 7/8 5/6 6 /8 6 /6 7 /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 6 / 6 5/6 7 /8 / /- 7/8-. /6 5/8 /8 5/8 5/8 / 5/6 6 / 7 /6 7 /8 /- /- /.78 5/8 5 /8 7/8 5/8 5/8 / 5/6 6 / 7 /6 7 /8 / /- /- /.8 5 /8 /8 5/8 5/8 / 5/6 6 / 7 /6 7 /8 6 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/8 /6 6 5/8 7 /6 7 /8 std / /- /-.7 / / /8 /6 /8 /8 7/8 /6 6 7/8 7 5/6 7 5/8 /- /- /.6 7/8 /6 / 5/6 /8 / / /6 7 / / /- 7/8-. /6 / /8 / / / 7/6 7 / 7 /6 8 /- /- /.78 5/8 5 7/8 / / / 7/6 7 / 7 /6 8 / /- /- /.8 5 /8 / / / 7/6 7 / 7 /6 8 / /8 5 / 7/8 / / / 7/6 7 / 7 /6 8 P 7

8 Square lange Mountings / to 6 ore Sizes Head Square lange Style ST55 (NP Style M5) ST5 SRIS Z + STRO P + STRO L + STRO ROD DI R T U 8 HOLS R T U Cap Square lange Style ST56 (NP Style M6) 8 HOLS Z + STRO P + STRO L + STRO ROD DI U T R Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP R T U V C V C V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P 8

9 ST5 SRIS Table nvelope and Mounting Dimensions OR DD NPT* S** R T U L P Square lange Mountings / to 6 ore Sizes DD STRO /.0 /-8 /8 6 /8 5/6 / /. / /8 /.60 /8 5/6- / /8 6 /8 /8 / 5/6.8 /8 /8 / /.0 /8 5/6- /8 6 /8 /8 / 5/6.9 7/8 5/8 //8 /8 /.90 /8 /8-6 / / 0 5/8 7/6 / / /8.76 /6 5 / 7/8 5/8.70 /8 /8-6 / / 0 5/8 7/6 / / /8. 5 7/6 6 / 7/8 5/ /6 /-0 5 / / 0 5/8 9/6 / / 7/ /8 7 5/8 5 /8 7/ /6 /-0 6 / / / 9/6 / 7/ /8 8 5/8 5 / /8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V X Z Z / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 5/8 7/8 5 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 5/6 5 5 / 5 /8 std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 5/8 5/6 5 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 5/ /6 5 /8 /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 5/8 9/6 5 / 5 9/6 5 5/8.5 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 / 5 /6 5 /8 std 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 5/6 5 /8 5 7/6 5 / /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 5/8 9/6 5 /8 5 /6 5 / / /- /-.7 / / / /6 / / 7/8 /6 5 5/8 5 5/6 6.5 std 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 5/6 / 5 /6 5 /8 /8 /- - 5/ /8 /8 5/8 5/6 /8 5/8 /6 5 7/8 5 / 6 / / /- /-.7 / / / /6 / / 7/8 5/6 6 /8 6 / 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 6 / 6 5/8 6 7/8 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 5/6 / 5 /6 5 /8 std /8 /- - 5/ /8 /8 5/8 5/6 /8 5/8 /6 5 7/8 5 / 6 / / /- /-.7 / / / /6 / / 7/8 5/6 6 /8 6 / 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 6 / 6 5/8 6 7/8 / /- 7/8-. /6 5/8 /8 5/8 5/8 / 5/6 6 / 6 7/8 7 /8 5 7/8- /-6 /8.98 / 7/8 7/8 5/6 / / /8 7/6 5 7/8 6 5/6 6 / /8 /- - 5/ /8 /8 5/8 5/6 /8 5/8 /6 6 /8 6 9/6 6 / std / /- /-.7 / / / /6 / / 7/8 5/6 6 /8 6 /6 7 /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 6 / 6 5/6 7 /8 / /- 7/8-. /6 5/8 /8 5/8 5/8 / 5/6 6 / 7 /6 7 /8 /- /- /.78 5/8 5 /8 7/8 5/8 5/8 / 5/6 6 / 7 /6 7 /8 / /- /- /.8 5 /8 /8 5/8 5/8 / 5/6 6 / 7 /6 7 /8 6 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/8 /6 6 5/8 7 /6 7 /8 std / /- /-.7 / / /8 /6 /8 /8 7/8 /6 6 7/8 7 5/6 7 5/8 /- /- /.6 7/8 /6 / 5/6 /8 / / /6 7 / / /- 7/8-. /6 / /8 / / / 7/6 7 / 7 /6 8 /- /- /.78 5/8 5 7/8 / / / 7/6 7 / 7 /6 8 / /- /- /.8 5 /8 / / / 7/6 7 / 7 /6 8 / /8 5 / 7/8 / / / 7/6 7 / 7 /6 8 P 9

10 Side Lugs and Centerline Lugs / to 6 ore Sizes Side Lug Style ST5S (NP Style MS) ST5 SRIS Z + STRO P + STRO L + STRO ROD DI S HOLS / ST S SU SS + STRO SU S XS S S TS US S S Centerline Lugs Style ST5S (NP Style MS) Z + STRO P + STRO L + STRO ROD DI S HOLS Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP ST S SU SS + STRO SU S XS S S S TS US S V C V C V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P 0

11 ST5 SRIS Table nvelope and Mounting Dimensions OR DD STRO NPT* S** S ST SU S TS US L P SS / /8 6 /8 / / 7/6 / 5/6 /8 / / / 7/8 / /8 6 /8 / 5/6 7/6 / 5/6 /8 / / 7/8 / /8 6 /8 / 5/6 7/6 / 5/6 /8 / / //8 /8 / / / 0 5/8 / / /8 /6 / / / / 5 / 7/8 5/8 / / / 0 5/8 / / /8 9/6 / / / 5 / 6 / 7/8 5/8 / 5 5 / / 0 5/8 / / 7/6 /6 9/6 /6 6 7/8 8 / 5 /8 7/8 /8 6 6 / / / / 7/6 /6 9/6 /6 7 7/8 9 / 5 / /8 5/8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Side Lugs and Centerline Lugs / to 6 ore Sizes Table Rod Dimensions OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V XS Z / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 /8 5/6 7/8 7/8- /-6 /8.98 / 7/8 /8 5/6 / / 5/6 5 / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 /8 5/6 5/6 7/8- /-6 /8.98 / 7/8 /8 5/6 / / 5/6 5 5/6 /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 9/6 5 7/6.5 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 /8 5/6 5 /6 std 7/8- /-6 /8.98 / 7/8 /8 5/6 / / 5/6 5 7/6 /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 9/6 5 /6 / /- /-.7 / / / /6 / / / /6 5 5/6.5 std 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 7/8 5/6 6 /8 /- - 5/ /8 /8 5/8 5/6 /8 /8 /6 6 / / /- /-.7 / / / /6 / / /8 5/6 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 / /6 6 5/8 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 7/8 5/6 6 std /8 /- - 5/ /8 /8 5/8 5/6 /8 /8 /6 6 / / /- /-.7 / / / /6 / / /8 5/6 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 / /6 6 5/8 / /- 7/8-. /6 5/8 /8 5/8 5/8 / 5/6 6 7/8 5 7/8- /-6 /8.98 / 7/8 7/8 5/6 / / /6 7/6 6 5/6 /8 /- - 5/ /8 /8 5/8 5/6 /8 5/6 /6 6 9/6 std / /- /-.7 / / / /6 / / 9/6 5/6 6 /6 /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 /6 6 5/6 / /- 7/8-. /6 5/8 /8 5/8 5/8 5/6 5/6 7 /6 /- /- /.78 5/8 5 /8 7/8 5/8 5/8 5/6 5/6 7 /6 / /- /- /.8 5 /8 /8 5/8 5/8 5/6 5/6 7 /6 6 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/6 /6 7 /6 std / /- /-.7 / / /8 /6 /8 /8 9/6 /6 7 5/6 /- /- /.6 7/8 /6 / 5/6 /8 / /6 /6 7 7/6 / /- 7/8-. /6 / /8 / / 5/6 7/6 7 /6 /- /- /.78 5/8 5 7/8 / / 5/6 7/6 7 /6 / /- /- /.8 5 /8 / / 5/6 7/6 7 /6 / /8 5 / 7/8 / / 5/6 7/6 7 /6 P

12 Side nd Lugs and Side Tapped Mountings / to 6 ore Sizes Side Tapped Style ST5S (NP Style MS) ST5 SRIS Z + STRO P + STRO L + STRO ROD DI SN + STRO XT TN Side nd Lug Style ST5S7 (NP Style MS7) Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP / NT THRD, ND DP TPPD MT. HOLS Z + STRO X + STRO P + STRO L + STRO ROD DI HOLS / T O L S + STRO L O S R S V C V C V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P

13 ST5 SRIS Table nvelope and Mounting Dimensions OR Side nd Lugs and Side Tapped Mountings / to 6 ore Sizes DD STRO NPT* S** L O S T NT TN R L P S SN / 5/6 /8 6 / / 9/6 7/ /8 / / /-0 5/8. / 5 / / / /8 /8 6 5/6 5/6 5/8 5/8 /8 / 5/6 5/6-8 7/8.8 / 5 7/8 / / /8 /8 6 /6 5/6 /6 5/ /8 / 5/6 /8-6 /.9 //8 /8 6 / /8 / / 7/6 / 0 7/8 /8 5/6 5/8 / / /8 /- /.76 7/8 5/8 6 5/8 5/8 / 7/6 / 0 /8 / 5/ 5/8 / / /8 /- /6. 7/8 5/8 6 7/8 5/8 5 5 / 9/6 / 0 /6 / /8 /8 5/8 / / 7/6 5/8- /6.0 5 /8 7/8 7 / 7/8 6 6 / 9/6 / / / 9/ / / 7/6 /-0 /.88 5 / /8 7 / /8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V ND XT X Z Z / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 /6 5/6 5/6 5 /8 7/8 5 5/8 7/8- /-6 /8.98 / 7/8 /8 5/6 / /6 5/6 5/6 5 / 5 / 6 std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 / 5/6 5/6 5 9/6 5/6 5 7/8 7/8- /-6 /8.98 / 7/8 /8 5/6 / / 5/6 5/6 5 5/6 5 5/6 6 / /8 /- - 5/ /8 /8 7/8 5/6 5/8 / / 9/6 9/6 6 /6 5 7/6 6 / / 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 7/6 5/6 5/6 5 /6 5 /6 6 /8 std 7/8- /-6 /8.98 / 7/8 /8 5/6 / 7/6 5/6 5/6 6 /6 5 7/6 6 / /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 7/6 9/6 9/6 6 7/6 5 /6 6 / / /- /-.7 / / / /6 / / 7/6 /6 /6 6 /6 5 5/6 7 / std 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 / 5/6 5/6 6 / 6 6 7/8 /8 /- - 5/ /8 /8 5/8 5/6 /8 / /6 /6 6 / 6 / 7 /8 / /- /-.7 / / / /6 / / / 5/6 5/6 7 6 / 7 /8 /- /- /.6 7/8 /6 5/8 5/6 / /8 / /6 /6 7 /8 6 5/8 7 / 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 5/8 5/6 5/6 6 5/8 6 7 std /8 /- - 5/ /8 /8 5/8 5/6 /8 5/8 /6 /6 6 7/8 6 / 7 / / /- /-.7 / / / /6 / / 5/8 5/6 5/6 7 /8 6 / 7 / /- /- /.6 7/8 /6 5/8 5/6 / /8 5/8 /6 /6 7 / 6 5/8 7 5/8 / /- 7/8-. /6 5/8 /8 5/8 5/8 5/8 5/6 5/6 7 / 6 7/8 7 7/8 5 7/8- /-6 /8.98 / 7/8 7/8 5/6 / / / 7/6 7/6 6 5/6 6 5/6 7 7/6 /8 /- - 5/ /8 /8 5/8 5/6 /8 / /6 /6 7 /6 6 9/6 7 /6 std / /- /-.7 / / / /6 / / / 5/6 5/6 7 7/6 6 /6 7 5/6 /- /- /.6 7/8 /6 5/8 5/6 / /8 / /6 /6 7 9/6 6 5/6 8 /6 / /- 7/8-. /6 5/8 /8 5/8 5/8 / 5/6 5/6 7 /6 7 /6 8 5/6 /- /- /.78 5/8 5 /8 7/8 5/8 5/8 / 5/6 5/6 7 /6 7 /6 8 5/6 / /- /- /.8 5 /8 /8 5/8 5/8 / 5/6 5/6 7 /6 7 /6 8 5/6 6 /8 /- - 5/ /8 /8 / 5/6 / 7/8 7/8 /6 /6 7 5/8 7 /6 8 /8 std / /- /-.7 / / /8 /6 /8 /8 7/8 /6 /6 7 7/8 7 5/6 8 /8 /- /- /.6 7/8 /6 / 5/6 /8 / 7/8 /6 / /6 8 / / /- 7/8-. /6 / /8 / / 7/8 7/6 7/6 8 / 7 /6 8 / /- /- /.78 5/8 5 7/8 / / 7/8 7/6 7/6 8 / 7 /6 8 / / /- /- /.8 5 /8 / / 7/8 7/6 7/6 8 / 7 /6 8 / / /8 5 / 7/8 / / 7/8 7/6 7/6 8 / 7 /6 8 / Caution: hen using mounting styles STS7, check clearance between mounting members and rod attachment or accessory. If necessary, specify longer rod extension to avoid interference with mounting members. P

14 Trunnion Mountings / to 6 ore Sizes Head Trunnion Style ST5T (NP Style MT) ST5 SRIS Z + STRO P + STRO L + STRO ROD DI /8 R TD X TL UT TL Cap Trunnion Style ST5T (NP Style MT) Z + STRO P + STRO L + STRO ROD DI /8 R TD X+ STRO TL UT TL Intermediate ixed Trunnion Style ST5T (NP Style MT) Z + STRO P + STRO L + STRO ROD DI Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP TD UV XI **Dimension XI to be specified by customer. TL TM UM TL V C V C V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P

15 ST5 SRIS Table nvelope and Mounting Dimensions OR D NPT* S** TD -.00 TL TM UM UT UV DD STRO L P Trunnion Mountings / to 6 ore Sizes MIN STRO / / /8 6 /8 / /.000 / / / / / / / /8 6 /8 / 5/ / / / / / /8 6 /8 / 5/6.000 / 5 / 5 / //8 /8 /8 / / / 0 5/8 / / /8.000 / 6 / 5 / / 7/8 5/8 7/8 / / 0 5/8 / / / / 7 / 6 / 5 7/8 5/8 7/8 5 5 / / 0 5/8 / / 7/ / 8 / 7 / 6 5 /8 7/8 5/8 6 / 6 / / / / 7/6.75 /8 7 5/8 0 /8 9 / 7 5 / /8 /8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 MIN** C D N V X XI X Z / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 / /6 5/6 /8 7/8 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 9/6 5/6 / 5 / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 / 5/6 5/6 /8 5/6 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 /6 5/6 / 5 5/6 /8 /- - 5/ /8 /8 7/8 5/6 5/8 / /8 5/6 9/6 /8 5 9/6.5 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 / 5/6 5/6 / 5 /6 std 7/8- /-6 /8.98 / 7/8 /8 5/6 / /8 /6 5/6 5/8 5 7/6 /8 /- - 5/ /8 /8 7/8 5/6 5/8 / /8 5/6 9/6 7/8 5 /6 / /- /-.7 / / / /6 / / 5 5/8 /6 /6 5 /8 5 5/6.5 std 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 / /6 5/6 5 5 /6 /8 /- - 5/ /8 /8 5/8 5/6 /8 / 7/6 /6 5 / 5 / / /- /-.7 / / / /6 / / / /6 5/6 5 / 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 7/8 /6 /6 5 5/8 6 5/8 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 / /6 5/6 5 5 /6 std /8 /- - 5/ /8 /8 5/8 5/6 /8 / 7/6 /6 5 / 5 / / /- /-.7 / / / /6 / / / /6 5/6 5 / 6 / /- /- /.6 7/8 /6 5/8 5/6 / /8 7/8 /6 /6 5 5/8 6 5/8 / /- 7/8-. /6 5/8 /8 5/8 5/8 /8 5 /6 5/6 5 7/8 6 7/8 5 7/8- /-6 /8.98 / 7/8 7/8 5/6 / / / /6 7/6 5 / 6 5/6 /8 /- - 5/ /8 /8 5/8 5/6 /8 / 7/6 /6 5 / 6 9/6 std / /- /-.7 / / / /6 / / / /6 5/6 5 / 6 /6 /- /- /.6 7/8 /6 5/8 5/6 / /8 7/8 /6 /6 5 7/8 6 5/6 / /- 7/8-. /6 5/8 /8 5/8 5/8 /8 5 /6 5/6 6 /8 7 /6 /- /- /.78 5/8 5 /8 7/8 5/8 5/8 /8 5 /6 5/6 6 /8 7 /6 / /- /- /.8 5 /8 /8 5/8 5/8 /8 5 /6 5/6 6 /8 7 /6 6 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/8 5/6 /6 5 7/8 7 /6 std / /- /-.7 / / /8 /6 /8 /8 7/8 5 /6 /6 6 /8 7 5/6 /- /- /.6 7/8 /6 / 5/6 /8 / 5 5/6 /6 6 / 7 7/6 / /- 7/8-. /6 / /8 / / / 5 9/6 7/6 6 / 7 /6 /- /- /.78 5/8 5 7/8 / / / 5 9/6 7/6 6 / 7 /6 / /- /- /.8 5 /8 / / / 5 9/6 7/6 6 / 7 /6 / /8 5 / 7/8 / / / 5 9/6 7/6 6 / 7 /6 **Dimension XI to be specified by customer. P 5

16 Clevis Mountings / to 6 ore Sizes Cap ixed Clevis* Style ST5P (NP Style MP) ST5 SRIS ZC + STRO P + STRO L + STRO CD PIN ROD DI MR C C C M L LR XC + STRO * DTCHL IS LSO VIL (NP MP) Cap Detachable Clevis Style ST5P (NP Style MP) CP IXD MOUNT (NP MP) LSO VIL S CTOR ZD + STRO P + STRO L + STRO ROD DI MR C C C CD PIN L LR XD + STRO Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP CP DTCHL (NP MP) LSO VIL S CTOR V C V C V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P 6

17 ST5 SRIS Table nvelope and Mounting Dimensions OR C CD -.00 C DD STRO NPT* S** L LR M MR L P / /.50 / /8 6 /8 / / / / / 5/8 / /.50 / / /8 6 /8 / 5/6 / / / 5/8 / / /.50 / /8 6 /8 / 5/6 / / / 5/8 //8 /8 / /.75 5/8 / / 0 5/8 / / /8 / / 5/6 7/8 5/8 /.75 5/8 / / 0 5/8 / / /8 / / 5/6 7/8 5/8 5 /.75 5/8 5 / / 0 5/8 / / 7/6 / / 5/6 5 /8 7/8 6 /.00 / 6 / / / / 7/6 / / /6 5 / /8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Clevis Mountings / to 6 ore Sizes Table Rod Dimensions OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V XC XD ZC ZD / std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 5 /8 5 / 5 7/8 6 / 7/8- /-6 /8.98 / 7/8 /8 5/6 / 5/6 5 / 6 /8 6 / 6 5/8 std 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 5 /8 5 / 5 7/8 6 / 7/8- /-6 /8.98 / 7/8 /8 5/6 / 5/6 5 / 6 /8 6 / 6 5/8 /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 9/6 6 6 /8 6 / 6 7/8.5 5/8 /-0 7/6-0 /. /8 / /8 9/6 / 5/8 5/6 5 / 5 7/8 6 6 /8 std 7/8- /-6 /8.98 / 7/8 /8 5/6 / 5/6 5 7/8 6 / 6 /8 6 / /8 /- - 5/ /8 /8 7/8 5/6 5/8 / 9/6 6 /8 6 / 6 5/8 7 / /- /-.7 / / / /6 / / /6 6 /8 6 / 6 7/8 7 /.5 std 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 5/6 6 7/8 7 / 7 5/8 8 / /8 /- - 5/ /8 /8 5/8 5/6 /8 /6 7 /8 7 / 7 7/8 8 / / /- /-.7 / / / /6 / / 5/6 7 /8 8 8 /8 8 / /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 7 / 8 /8 8 / 8 7/8 7/8- /-6 /8.98 / 7/8 7/8 5/6 / 5/8 5/6 6 7/8 7 / 7 5/8 8 / std /8 /- - 5/ /8 /8 5/8 5/6 /8 /6 7 /8 7 / 7 7/8 8 / / /- /-.7 / / / /6 / / 5/6 7 /8 8 8 /8 8 / /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 7 / 8 /8 8 / 8 7/8 / /- 7/8-. /6 5/8 /8 5/8 5/8 5/6 7 / 8 /8 8 / 9 /8 5 7/8- /-6 /8.98 / 7/8 7/8 5/6 / / 7/6 7 /8 7 / 7 7/8 8 / /8 /- - 5/ /8 /8 5/8 5/6 /8 /6 7 /8 8 8 /8 8 / std / /- /-.7 / / / /6 / / 5/6 7 5/8 8 / 8 /8 9 /- /- /.6 7/8 /6 5/8 5/6 / /8 /6 7 / 8 /8 8 / 9 /8 / /- 7/8-. /6 5/8 /8 5/8 5/8 5/ /8 8 / 9 /8 /- /- /.78 5/8 5 /8 7/8 5/8 5/8 5/ /8 8 / 9 /8 / /- /- /.8 5 /8 /8 5/8 5/8 5/ /8 8 / 9 /8 6 /8 /- - 5/ /8 /8 / 5/6 / 7/8 /6 8 /8 8 7/8 9 /8 9 7/8 std / /- /-.7 / / /8 /6 /8 /8 /6 8 /8 9 /8 9 /8 0 /8 /- /- /.6 7/8 /6 / 5/6 /8 / /6 8 / 9 / 9 / 0 / / /- 7/8-. /6 / /8 / / 7/6 8 / 9 / 9 / 0 / /- /- /.78 5/8 5 7/8 / / 7/6 8 / 9 / 9 / 0 / / /- /- /.8 5 /8 / / 7/6 8 / 9 / 9 / 0 / / /8 5 / 7/8 / / 7/6 8 / 9 / 9 / 0 / P 7

18 Double Rod nd and Head Rectangular Mount / to 6 ore Sizes ST5 SRIS Head Rectangular Style ST55 (*NOT NP - Style M5) Z + STRO P + STRO L + STRO ROD DI HOLS RD R RT T U Double Rod end Style ST5D ZM + x STRO ZL + STRO P + STRO LD + STRO ROD DI Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P 8 V C V C

19 ST5 SRIS Double Rod nd and Head Rectangular Mount / to 6 ore Sizes Table nvelope and Mounting Dimensions DD STRO OR NPT* S** R U T L P / /8 6 5/6 / /. / 5/6 5/8 / / /8 6 /8 / 5/6.8 /8 7/8 5/8 / / /8 6 /8 / 5/6.9 / / / /8 / / / 0 7/6 / / /8.76 5/8 / 5/8 / / 0 7/6 / / /8. 5 /8 / / 5/8 5 5 / / 0 9/6 / / 7/ /6 5 5/8 / 7/8 6 6 / / 9/6 / 7/ / 6 7/6 5 /8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions ±.00 C D RT Table nvelope and Mounting Dimensions dd Stroke MX. RD XC / std 5/8 /-0 7/6-0 /. /8 / /.967 /6 5/6 7/8 std 5/8 /-0 7/6-0 /. /8 / /.967 /6 5/6 5/6 7/8- /-6 /8.98 / 7/8 /8.67 / /8 5/6 5 5/6 / std 7/8- /-6 /8.98 / 7/8 /8.67 / /8 5/6 5 7/6 /8 /- - 5/ /8 /8 /8.967 / 5/8 9/6 5 /6 / std 7/8- /-6 /8.98 / 7/8 /8.67 / /8 5/6 6 /8 /- - 5/ /8 /8 /8.967 / 5/8 /6 6 / std /8 /- - 5/ /8 /8 /8.967 / 5/8 /6 6 / / /- /-.7 / / /8.67 / 7/8 5/6 6 / 5 std / /- /-.7 / / /8.67 / 7/8 5/6 6 /6 /- /- /.6 7/8 /6 /8.77 / /6 6 5/6 6 std / /- /-.7 / / /8.67 / 7/8 /6 7 5/6 /- /- /.6 7/8 /6 /8.77 / /6 7 7/6 DOUL ROD ND To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. fter selecting necessary dimensions from that drawing, return to this page supplement the single rod dimensions with those shown on drawings above and dimension table below. Note that double rod cylinders have a head (Dim. ) at both ends and that dimension LD replaces L and ZL replaces Z, etc. The double rod dimensions differ from, or are in addition to those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder. On a double rod cylinder where the two rod ends are different, be sure to clearly state which rod end is to be assembled at which end. Port position is standard. If other than standard, specify pos., or when viewed from rod end # only. (See port position information in Page.) dd Stroke dd X Stroke OR ROD SIZ LD ZL SS D SN D S D X D Z D ZM / std 5/8 7/8 5 / /8 / 6 /8 6 / 6 / 6 /8 std 5/8 7/8 5 /6 /8 / 6 / 6 7/6 6 / 6 /8 / std 5 6 5/6 / /8 7 /8 7 /6 7 /8 7 / std 6 7 /8 / 5/8 7 / 7 5/8 8 7 / std /8 6 7 /8 / 5/ /8 8 5 std / 6 / 7 5/6 5/8 7/8 8 /8 8 9/6 9 /6 8 / 6 std / 7 8 /6 /8 /8 9 9 /8 9 5/8 9 / Replaces : L Z SS SN S X Z -- On single rod mounting styles: ll Mtgs. Style MS, MS MS MS7 ll Mtgs. ll dimensions are in inches and apply to standard rod sizes only. or alternate rod sizes, determine all envelope dimensions (within LD dim.) as described above and then use appropriate rod end dimensions for proper rod size from single rod cylinder. P 9

20 Tie Rod, Head Square and Cap Square Mountings 8 ore Size Tie Rods xtended Style ST5X (NP Style MX) ST5 SRIS Z + STRO P + STRO L + STRO DD ROD DI TT R Style ST5X (NP MX) Head Tie Rods xtended, illustrated: Style ST5X (NP MX), Cap Tie Rods xtended; and Style STX (NP MX), oth nds Tie Rods xtended are also available. ll T styles can be dimensioned from Style STX drawing at right. asic Mounting STX0 NP MX0 no tie rods extended can be supplied upon request. Head Square lange Style ST5 (NP Style M) HOLS Z + STRO P + STRO L + STRO ROD DI Cap Square lange Style ST5 (NP Style M) Z + STRO P + STRO L + STRO ROD DI Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP T X + STRO TT T HOLS V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P 0 V C V C

21 ST5 SRIS Table nvelope and Mounting Dimensions- MX, MX, MX style OR DD DD STRO NPT* S** R L P /6 5/8-8 8 / / / / 9/ /8 / *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Tie Rod, Head Square and Cap Square Mountings 8 ore Size Table Rod Dimensions - MX, MX, MX style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V TT Z 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/8 /6 7 5/6 / /- /-.7 / /8 /6 /8 /8 7/8 /6 7 9/6 std /- /- /.6 7/8 /6 / 5/6 /8 / /6 7 /6 / /- 7/8-. /6 / /8 / / / 7/6 7 5/6 /- /- /.78 5/8 5 7/8 / / 5 / / 7/6 7 5/6 / /- /- /.8 5 /8 / / 5 / / 7/6 7 5/6 / /8 5 / 7/8 / / 5 / / 7/6 7 5/6 / /- /- / 5.8 7/8 6 /8 / / 7 / 7/6 7 5/6 5 /- / / 6 / 7/8 / / 7 / 7/6 7 5/6 5 / 5 /- - 5 / 6.8 5/8 7 5 /8 / / 7 / 7/6 7 5/6 Table nvelope and Mounting Dimensions - M, M styles DD STRO OR NPT* S** T L P 8 8 / / / / 9/ /8 / *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions - M, M, style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V TT X Z Z 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/8 /6 5 / 7 5/6 6 / / /- /-.7 / /8 /6 /8 /8 7/8 /6 5 / 7 9/6 7 std /- /- /.6 7/8 /6 / 5/6 /8 / /6 5 5/8 7 /6 7 /8 / /- 7/8-. /6 / /8 / / / 7/6 5 7/8 7 5/6 7 /8 /- /- /.78 5/8 5 7/8 / / 5 / / 7/6 5 7/8 7 5/6 7 /8 / /- /- /.8 5 /8 / / 5 / / 7/6 5 7/8 7 5/6 7 /8 / /8 5 / 7/8 / / 5 / / 7/6 5 7/8 7 5/6 7 /8 / /- /- / 5.8 7/8 6 /8 / / 7 / 7/6 5 7/8 7 5/6 7 /8 5 /- / / 6 / 7/8 / / 7 / 7/6 5 7/8 7 5/6 7 /8 5 / 5 /- - 5 / 6.8 5/8 7 5 /8 / / 7 / 7/6 5 7/8 7 5/6 7 /8 P

22 Side and Centerline Lugs and Side Tapped Mountings 8 ore Size Side Lugs Style ST5S (NP Style MS) ST5 SRIS Z + STRO P + STRO L + STRO ROD DI S HOLS / ST S SU SS + STRO SU S XS S S TS US S S Centerline Lugs Style ST5S (NP Style MS) Z + STRO P + STRO L + STRO ROD DI S HOLS ST S SU SS + STRO SU S XS S S S TS US S Side Tapped Style ST5S (NP Style MS) Z + STRO P + STRO L + STRO Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP ROD DI / SN + STRO XT TN NT THRD, ND DP TPPD MT. HOLS V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P V C V C

23 ST5 SRIS Side and Centerline Lugs and Side Tapped Mountings 8 ore Size Table nvelope and Mounting Dimensions- MS, MS style OR DD STRO NPT* S** S* ST SU S TS US L P SS 8 8 / / / / 9/6 /6 9/6 /6 9 7/8 / 5 7/8 / / *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. * Upper surface spot faced for socket head screws. Table Rod Dimensions - MS, MS style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V TT XS Z 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/6 /6 7 5/6 / /- /-.7 / /8 /6 /8 /8 9/6 /6 7 9/6 std /- /- /.6 7/8 /6 / 5/6 /8 / /6 /6 7 /6 / /- 7/8-. /6 / /8 / / 5/6 7/6 7 5/6 /- /- /.78 5/8 5 7/8 / / 5 / 5/6 7/6 7 5/6 / /- /- /.8 5 /8 / / 5 / 5/6 7/6 7 5/6 / /8 5 / 7/8 / / 5 / 5/6 7/6 7 5/6 / /- /- / 5.8 7/8 6 /8 / / 7 5/6 7/6 7 5/6 5 /- / / 6 / 7/8 / / 7 5/6 7/6 7 5/6 5 / 5 /- - 5 / 6.8 5/8 7 5 /8 / / 7 5/6 7/6 7 5/6 Table nvelope and Mounting Dimensions - MS style DD STRO OR NPT* S** S* ND NT TN L P SN 8 8 / / / / 9/6 /6 /8 /-0 / 5 7/8 / / *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions - MS, style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V TT XT Z 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 /6 /6 7 5/6 / /- /-.7 / /8 /6 /8 /8 /6 /6 7 9/6 std /- /- /.6 7/8 /6 / 5/6 /8 / /6 /6 7 /6 / /- 7/8-. /6 / /8 / / 7/6 7/6 7 5/6 /- /- /.78 5/8 5 7/8 / / 5 / 7/6 7/6 7 5/6 / /- /- /.8 5 /8 / / 5 / 7/6 7/6 7 5/6 / /8 5 / 7/8 / / 5 / 7/6 7/6 7 5/6 / /- /- / 5.8 7/8 6 /8 / / 7 7/6 7/6 7 5/6 5 /- / / 6 / 7/8 / / 7 7/6 7/6 7 5/6 5 / 5 /- - 5 / 6.8 5/8 7 5 /8 / / 7 7/6 7/6 7 5/6 P

24 Side nd Lugs and Clevis Mountings 8 ore Size Side nd Lugs Style ST5S7 (NP Style MS7) ST5 SRIS Z + STRO X + STRO P + STRO L + STRO ROD DI TT T S + STRO L Cap ixed Clevis Style ST5P (NP Style MP) Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP / O L O HOLS S R S ZC + STRO P + STRO L + STRO MR LR ROD DI CD C C C M L XC + STRO Cylinders with this mounting style are mounted on the precision ground surfaces of the head and cap. There must be a minimum gap of at least /6 of an inch between the bottom of the lug and the mounting surface before the mounting bolts are tightened. V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P V C V C

25 ST5 SRIS Side nd Lugs and Clevis Mountings 8 ore Size Table nvelope and Mounting Dimensions- MS style DD STRO OR NPT* S** L O S T NT R L P S 8 8 / /6 / /8 5/8 / 5/6 / / 9/6 /6 5 7/8 / 7 /8 *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions - MS7 style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V TT X Z 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 /6 7 7/8 8 / / /- /-.7 / /8 /6 /8 /8 /6 8 /8 8 / std /- /- /.6 7/8 /6 / 5/6 /8 / /6 8 / 8 7/8 / /- 7/8-. /6 / /8 / / 7/6 8 / 9 /8 *Mounting style MS7 not offered in all rod size. Caution: hen using mounting style, check clearance between mounting members and rod attachment or accessory. If necessary, specify longer rod extension to avoid interference with mounting members. Table nvelope and Mounting Dimensions - MP style DD STRO -.00 NPT* S** OR C CD* C L LR M MR L P 8 /.00 / 8 / / / / 9/6 / / /6 5 7/8 / *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. * Dimension CD is pin diameter Table Rod Dimensions - MP, style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V XC ZC 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 /6 8 / 9 / / /- /-.7 / /8 /6 /8 /8 /6 8 / 9 / std /- /- /.6 7/8 /6 / 5/6 /8 / /6 8 5/8 9 5/8 / /- 7/8-. /6 / /8 / / 7/6 8 7/8 9 7/8 /- /- /.78 5/8 5 7/8 / / 7/6 8 7/8 9 7/8 / /- /- /.8 5 /8 / / 7/6 8 7/8 9 7/8 / /8 5 / 7/8 / / 7/6 8 7/8 9 7/8 / /- /- / 5.8 7/8 6 /8 / / 7/6 8 7/8 9 7/8 5 /- / / 6 / 7/8 / / 7/6 8 7/8 9 7/8 5 / 5 /- - 5 / 6.8 5/8 7 5 /8 / / 7/6 8 7/8 9 7/8 P 5

26 Trunnion Mountings 8 ore Size Head Trunnion Style ST5T (NP Style MT) ST5 SRIS Z + STRO P + STRO L + STRO ROD DI /8 R TD X TL UT TL Cap Trunnion Style ST5T (NP Style MT) Z + STRO P + STRO L + STRO ROD DI /8 R TD X+ STRO TL UT TL Intermediate ixed Trunnion Style ST5T (NP Style MT) Z + STRO P + STRO L + STRO ROD DI TD UV Rod nd Dimensions see table Thread Style # (NP Style SM) Small Male D RNCH Thread Style # (NP Style IM) Intermediate Male D RNCH CC Thread Style # (NP Style S) Small emale D RNCH THD DP XI ** Dimension XI to be specified by customer TL TM UM TL V C Specials Thread Style #X To order, specify Style #X and give desired dimensions for CC or, and. If otherwise special, furnish dimensional sketch. high strength rod end stud is supplied on thread style # through diameter rods and on thread style # through diameter rods. Larger sizes or special rod ends are cut threads. Style # rod ends are recommended where the workpiece is secured against the rod shoulder. hen the workpiece is not shouldered, style rod ends are recommended through piston rod diameters and style # rod ends are recommended on larger diameters. Use style # for applications where female rod end threads are required. If rod end is not specified, style # will be supplied P 6 V C V C

27 ST5 SRIS Trunnion Mountings 8 ore Size Table nvelope and Mounting Dimensions- MT, MT style OR DD STRO -.00 NPT* S** L P TD TL UT 8 8 / / / / 9/6.75 /8 / 5 7/8 / *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions - MT, MT style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 C D N V TT X X Z 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/8 / /6 / /- /-.7 / /8 /6 /8 /8 7/8 /6 6 / 7 9/6 std /- /- /.6 7/8 /6 / 5/6 /8 / /6 6 /8 7 /6 / /- 7/8-. /6 / /8 / / / 7/6 6 5/8 7 5/6 /- /- /.78 5/8 5 7/8 / / 5 / / 7/6 6 5/8 7 5/6 / /- /- /.8 5 /8 / / 5 / / 7/6 6 5/8 7 5/6 / /8 5 / 7/8 / / 5 / / 7/6 6 5/8 7 5/6 / /- /- / 5.8 7/8 6 /8 / / 7 / 7/6 6 5/8 7 5/6 5 /- / / 6 / 7/8 / / 7 / 7/6 6 5/8 7 5/6 5 / 5 /- - 5 / 6.8 5/8 7 5 /8 / / 7 / 7/6 6 5/8 7 5/6 Table nvelope and Mounting Dimensions - MT style DD STRO MT NPT* S** -.00 MIN L P OR D TD TL TM UM UV STRO 8 / 8 / / / / 9/6.75 /8 9 / / 9 / 7/8 5 7/8 / *NPT ports will be furnished as standard unless S straight thread ports are specified. ** S straight thread ports are indicated by port number. Table Rod Dimensions - MT, style OR ROD SIZ Thread Style # # &# Rod xtensions and pilot dimensions Table nvelope and Mounting Dimensions dd Stroke ±.00 MIN** C D N V TT XI Z 8 /8 /- - 5/ /8 /8 / 5/6 / 7/8 5/6 /6 7 5/6 / /- /-.7 / /8 /6 /8 /8 5 /6 /6 7 9/6 std /- /- /.6 7/8 /6 / 5/6 /8 / 5 5/6 /6 7 /6 / /- 7/8-. /6 / /8 / / 5 9/6 7/6 7 5/6 /- /- /.78 5/8 5 7/8 / / 5 / 5 9/6 7/6 7 5/6 / /- /- /.8 5 /8 / / 5 / 5 9/6 7/6 7 5/6 / /8 5 / 7/8 / / 5 / 5 9/6 7/6 7 5/6 / /- /- / 5.8 7/8 6 /8 / / 7 5 9/6 7/6 7 5/6 5 /- / / 6 / 7/8 / / 7 5 9/6 7/6 7 5/6 5 / 5 /- - 5 / 6.8 5/8 7 5 /8 / / 7 5 9/6 7/6 7 5/6 ** Dimension XI to be specified by customer P 7

28 Rod Size and Stop Tube Selection ST5 SRIS ROD DIMTR SIC LNTH-INCHS /8 / 5/8 / / / 5 5 / CONSULT CTOR , ,000 THRUST - POUNDS ROD SIZ SLCTION INCHS O STOP TU To determine the minimum recommended piston rod dia for your application: ) Determine the cylinder thrust using the force volume chart. (Page ) (Thrust equals bore area multiplied by the operating pressure.) ) Select from the diagram beside the type of mounting you will use. ) Determine the basic length by multiplying the real stroke by the stroke factor. ) nter the graph along the values of basic length and Thrust. The stripe within which these lines intersect represents the minimum recommended piston rod diameter. STOP TU SLCTION Stop tubes are installed between the piston and the head on long stroke cylinders to reduce the load on the bearing. That, in turn, reduces bearing wear and tendency to buckle. To determine if a stop tube is required and, if so, its length, first determine the basic length from the diagram. Step, & of The Rod Size Selection. If the basic length is less than 0, no stop tube is needed. If it s over than 0, a one-inch stop tube is recommended for every 0 (or fraction thereof) over 0 See Page 6 on Stop Tube Option and how to Order MOUNTIN ROD ND CONNCTION STRO CTOR Center line Mounting Centerline mounting places the mounting bolts in simple shear or simple tension so that the mechanism is protected from compound forces. Centerline mounting is a rigid mounting style and this requires accurate cylinder alignment to prevent damage to the cylinder working parts. Mountings are : MX, MX, MX, M, M, M, M. oot Mounting oot mounting secures the cylinder along its side. Since the mounting surface plane is thus not centered directly on the line of force, the mounting bolts are subjected to a significant amount of shear stress. ecause foot mounts are rigid, they require accurate cylinder alignment. Mountings are : MS, MS, MS, MS7. Pivot Mounting Pivot mounting is used when the cylinder must pivot during piston motion. Clevis and Trunnion mounts are two methods used to allow this motion. The Clevis end design locates the pivot point at the cap end of the cylinder. Trunnion mounting uses the head or the cap of the cylinder to allow it to pivot at any of the two locations. The Mountings are: MP, MP, MP, MT, MT, MT. MT TRUNNION ON HD ND MT INTRMDI- T TRUN- NION MT TRUNNION ON CP ND.00 MP, MP, MP CLVIS ON CP ixed & Rigidly uided Pivoted & Rigidly uided Supported but not Rigidly uided Unsupported Pivoted & Rigidly uided Pivoted & Rigidly uided Pivoted & Rigidly uided Pivoted & Rigidly uided.00 P 8

29 ST5 SRIS Pressure Rating for ST5 series hydraulic cylinders vary by bore size and rod size as shown in table below. or pressure higher than those indicated, ST6 series Heavy Duty cylinders should be used. ore Size Rod Size Pressure Rating at : Design actor (on Tensile) / 5/ / /8 95 / 5/ /8 550 / 550 / 00 /8 00 / /8 85 / / /8 700 / / / /8 500 / / / /8 0 / / / / / 60 Push orce and Displacement Cylinder Push orce in pounds Displacement Per ore piston at various Pressures inch of stroke Size rea (allons) / / / Deductions for Pull orce or Displacement To determine Cylinder Pull orce or displacement, deduct the following force or displacement corresponding to rod size, from selected push orce or displacement corresponding to ore size in table above Piston Rod Diameter orce in Displacement Per Rod Rod pounds at various Pressures inch of stroke Size rea (allons) 5/ / / / / / / rea xtended stroke Push : =.785 D rea Retracted stoke Pull : R = (.785 D RD ) Cylinder Push orce ormula : = P x Cylinder Pull orce ormula : R = P x R Cylinder Volume (allons) : = Net area (in ) x Stroke (in) = orce xtended Stroke R= orce Retracted Stroke P= orking Pressure D= ore Diameter RD= Rod Diameter Pressure Ratings and Cylinder orce Calculation P 9

30 Cylinder ccessories NP CLVIS RCT L L M CD DD TP SQ R C C C ST5 SRIS Part # C CD PIN DI. C DD L L M R C / / /8- / /8 / / 5/8 C / 5/8 /-0 / 7/8 / / 9/6 C-0.55 / 5/8-8 / / / / C-.0 /8 5/8-8 5 /8 /8 /6 C-7.5 / / 7/8-6 / /8 / / 5/6 C-0.5 / - 7 / / / 5 / C-5.0 / / /8-8 / / 6 9/ C-0.0 / /- 9 / / / / 7 / C-5.0 / /- 5/8 5 /6 / 9 5/8 C-0.5 / - 7/8 6 7/6 / / NP RCT Part # C L L M CD SQ DD R C CD PIN DI. DD L L M R / / / /8 / / 5/ / 7/ / 7/8 / / 9/6-0.5 / / / / / -0H.50 / / /8 / / -.00 /8 / 5 /8 /8 /6-7.5 / 9/ 6 / /8 / / 5/6-7H.50 / 9/ 6 / /8 / / 5/ /6 7 / / / 5 / -0H.50 /6 7 / / 5 / / /6 8 / / 6 9/ -5H.00 / /6 8 / / / 6 9/ -0H.00 5/6 9 / 5 / / 7 / / /6 5/8 5 /6 / 9 5/ /6 7/8 6 7/6 / / NP ROD CLVIS C C C R C CH CD L Part # C CD PIN DI. C CH HX. C R L RC / / / / 7/6-0 / RC / /8 / 5/8 / /-6 / RC-07H.65 / /8 /8 5/8 / /-6 RC-0.55 /8 / / - / RC-0H.55 5/6 / / - 5/6 RC-.0 /8 /8 /8 /- /8 RC-H.0 /8 / /8 /- / RC-7.5 / / /8 / / /- / RC / 5/6 / 7/8- / RC-5.0 / 6 / / / / /- RC / 7/8 / / /- / RC-0H.0 6 / 7/8 / /- / RC-5.0 / 8 / 5 / /- RC-5H.0 / 7 / 5 / /- / RC /8 / - / NP ROD Part # C C CD PIN DI. R R-05 / / / / 5/8 7/6-0 R-07 /8 /6 / / 7/8 /-6 R-0 5/8 /6 / /6 - R-0H /8 /8 / 7/6 - R- 7/6 /8 9/6 /- R-7 / / / /- R-0 5 / / 7/8- R-0H / /8 / 7/8 /- R-5 / 6 /6 / /6 /- R-0 / 6 /8 / /- R-0H 5/8 6 / / / /- R-5 / 7 5/8 / 7/8 /- R-5H 5 7 5/8 / 7/8 /- R-0 5 / 9 /8 / 7/6 - R-0H 5 / 9 /8 5 7/6 /- NP PIN -H OPTION Cutter pin included Part # CD C D P-05 / P-07 / P P- / P-7 / P P-5 / P P-5 / P P 0

31 ST5 SRIS Cylinder Special Rod nd Style #5 Piston Rod nd lange Rod nd lange Coupling or series ST5, ST6 Hydraulic and ST and ST Pneumatic Simplifies alignment Reduces assembly time llows full rated hydraulic pressure in push and pull directions vailable in 5/8 through 5.5 piston rod diameters ROD DI. R/6" OR ROD SIZ ±.00 C C D V / std 5/8. /8 /8 5/8 / /8 / /.98 / / 5/6 /8 /6 / /8 std 5/8. /8 /8 5/8 / /8 / /.98 / / 5/6 /8 /6 / /8 / /8 / /6 /8 7/8 5/8 /.5 5/8. /8 /8 5/8 / /8 / / std.98 / / 5/6 /8 /6 / /8 / /8 / /6 /8 7/8 5/8 / /.7 / 5/6 / /8 / /8 D V C Style #6 Piston Rod nd Plain.5 std.98 / / 5/6 /8 /6 / /8 / /8 / /6 /8 7/8 5/8 / /.7 / 5/6 / /8 / /8.6 7/8 5/8 /6 5/8 /8 / /.98 / / 5/6 /8 /6 / /8 std / /8 / /6 /8 7/8 5/8 / /.7 / 5/6 / /8 / /8.6 7/8 5/8 /6 5/8 /8 / / /. / 5/6 / / 5/8 / 5.98 / / 5/6 /8 /6 / /8 / /8 / /6 /8 7/8 5/8 / std /.7 / 5/6 / /8 / /8.6 7/8 5/8 /6 5/8 /8 / / /. / 5/6 / / 5/8 /.78 5/8 7/6 7/8 / 5/8 7/8 /.8 /8 /6 / 5/8 5 5/8 ROD DI. 5 6 / /8 / /6 /8 7/8 5/8 / std /.7 / 5/6 / /8 / /8.6 7/8 5/8 /6 5/8 /8 / / /. / 5/6 / / 5/8 /.78 5/8 7/6 7/8 / 5/8 7/8 /.8 /8 /6 / 5/8 5 5/8.78 / /6 / 5 / V C /8" 8 / /8 / /6 /8 7/8 5/8 / /.7 / 5/6 / /8 / /8 std.6 7/8 5/8 /6 5/8 /8 / / /. / 5/6 / / 5/8 /.78 5/8 7/6 7/8 / 5/8 7/8 /.8 /8 /6 / 5/8 5 5/8.78 / /6 / 5 / / / /6 / / / 6 / /8 /6 / 7/8 / 6 5/8 5 / / 5/6 7/8 /8 / 7 / P

32 Spherical earing Mount Style S / to 8 ore Sizes ST5 SRIS Spherical earing Mount Style S Mounting Information Head nd Mounting X X Mounting Information Cap nd Mounting Table Dimensions Recommended maximum swivel angle on each side of the cylinder centerline. ore Head nd Mount Cap nd Mount ngle Tan. of ngle Tan. of / / 0.05 / 0.05 / 0.0 / / / 0.0 / / / 0.05 / 0.05 / 0.0 / / 0.05 / / 0.05 / 0.05 Note: Dimension X is the maximum off center mounting of the cylinder. To Determine dimension X for various stroke lengths multiply the distance between pivot pin holes by tangent of angle. or extended position use X = XL times X stroke. X X XL + STRO P

33 ST5 SRIS Spherical earing Mount Style S / to 8 ore Sizes XL + STRO LURICTION ITTIN M ZC + STRO XC + STRO C LURICTION ITTIN R MS X CD NR L CD X OR / ROD SIZ Thread Style # dd Stroke Max Oper. PSI #7 XC XL ZC CD* C R X L M MS NR ST ST5 std 5/8 7/6-0 - / 5/8 5 /8 6 / 6/8 / /6-0 / 5 / 6 5/8 6 / 7/ /8 /6 7/6 / / 5/6 5/ std 5/8 7/6-0 - / 5/8 5 /8 6 / 6/8 / /6-0 / 5 / 6 5/8 6 / 7/8 /8-7/6-0 / / 6 6 7/8 6 / / /8 7/6-0 - / 5/8 5 /8 6 / 6/8 / std - 7/6-0 / 5 / 6 5/8 6 / 7/ /8-7/6-0 / / 6 6 7/8 6 / / / - 7/6-0 / / 6 /8 7 / 7 /8 /8 std /-6 - /8 / 6 7/8 8 /8 7 7/8 /8 - /-6 /8 7 /8 8 /8 8 /8 / / - /-6 /8 / 7 /8 8 5/8 8 /8 / /-6 /8 /8 7 / 8 / 8 / 5/8 /-6 - /8 5/8 6 7/8 8 /8 7 7/8 std /8 - /-6 /8 7 /8 8 /8 8 /8 / / - /-6 /8 / 7 /8 8 5/8 8 /8 / /-6 /8 /8 7 / 8 / 8 / 5/8 / - /-6 /8 5/8 7 / 9 8 / 7/8 /-6 - /8 / 7 /8 8 /8 8 /8 /8 - /-6 /8 7 /8 8 5/8 8 /8 / std / - /-6 /8 / 7 5/8 8 7/8 8 5/8 / /-6 /8 /8 7 / 9 8 / 5/ / - /-6 /8 5/8 8 9 / 9 7/8 - /-6 /8 5/8 8 9 / 9 7/8 / - /-6 /8 5/8 8 9 / 9 7/8 / /8 7/8 8 /8 0 9 /8 / std / - - 5/8 /8 8 /8 0 / 9 5/ /8 / 8 / 0 /8 9 / /8 / - - 5/8 / 8 / 0 5/8 0 / /8 / 8 / 0 5/8 0 / / - - 5/8 / 8 / 0 5/8 0 / /8 / 8 / 0 5/8 0 /8 7/8 /6 7/6 / / 5/6 5/ /8 /6 7/6 / / 5/6 5/ / /8 / /6 / / /8 / /6 / / /8 / /6 / /8 / 7/8 7/6 / /6 / / /8 7/8 8 / 0 /8 9 / / std / - - 5/8 /8 8 / 0 /8 9 / - - 5/8 / 8 5/8 0 / 9 7/8 /8 / - - 5/8 / 8 7/8 0 / 0 /8 / /8 / 8 7/8 0 / 0 /8 / / - - 5/8 / 8 7/8 0 / 0 /8 / /8 / 8 7/8 0 / 0 /8 /8 / - - 5/8 / 8 7/8 0 / 0 /8 / /8 / 8 7/8 0 / 0 /8 /8 5 / - - 5/8 / 8 7/8 0 / 0 /8 /8 7/8 / 7/8 7/6 / /6 / P

34 Cylinder accessories Spherical earing Mounting NP SPHRICL ROD ST5 SRIS CD R (MX) C LU ITTIN X ore Size Part # CD C X R L L LOD /, & / RS /6 7/8 7/6 /6 / 7/6-0 7/8 6 /, & 5 RS / / /8 /6 /-6 5/6 9 6 & 8 RS / 7/8 7/8 / 7/6 - / 6860 L THRDS L (DI) 0 RS /8 /6 /6 7/8 /- 856 RS /8 / 7/ /6 /8 /- / 005 RS /8 / / / / 7/8- / 709 NP SPHRICL PIVOT PIN CL CD ore Size Part # CD CL LOD /, & / PS / /, & 5 PS / & 8 PS / 00 0 PS / PS / 0500 PS /6 700 NP SPHRICL CLVIS RCT MR C C C L M LR DD DI HOLS CD R R ore Size Part # CD C C DD L LR M MR R LOD /, & / CS-05 / +.00/+.00 7/6 / / / / 5/6 / 5/ /, & 5 CS-07 / +.00/+.00 / 5/8 7/ / 5/8 /8 7/ & 8 CS /+.00 7/8 / 7/ 5 / / / /6 / CS- /8 +.00/+.00 /6 / 6 / 7/8 / 7/6 /8 5/ CS-7 / +.00/+.00 7/ / 9/ 8 / / / 7/8 / / CS /+.00 / / 9/ 0 5/8 / 5 / 5/6 / P

35 ST5 SRIS Thread xtension Rod xtension Cylinder Options Option code Piston Rod Thread xtension can be ordered over standard. To order add option code =(_) and specify length. Option code C Piston Rod xtension can be order over standard. To order add option code C=(_) and specify C length Port & djustable Cushion Location Option code N(_) C(_) Specify optional location, N C default Magnetic Piston & luminum Tubing Option Code T hen position sensing of the cylinder is required, a Magnetic Ring Must be added. The Magnetic ring is placed at the center of the piston under the wear band. The magnetic band will create a magnetic field which will actuate the sensor. Option code T. Must be used with aluminum tubing - Low Pressure lectroless Nickel Option Code N The properties of lectroless nickel contribute to the multitude of uses. The coating provides an attractive finish, while exhibiting high abrasion and corrosion resistance. Its ability to uniform coat blind holes, threads, internal surfaces and sharp edges contributes to its effectiveness. It has a very high bonding strength to the base metal. Coating can be done on aluminum, steel, cast iron, etc Viton Seals Option code LV & PV luorocarbon will be chosen for higher temperature range from 00 to 00 (00 C) or Chemical resistance our standard lue Seals will Outstand Viton by far in most chemical pplication and wear resistance. Resists most wash down application. LV : U-cup Seals in luorocarbon ith Teflon ackup PV : Polypack Ucup/oring loaded in luorocarbon ir leeder Option,,, n air bleed may be ordered at either or both ends of the cylinder as an option. To provide for maximum bleeding of air from the cylinder, STRCL places its air bleeds in the end caps to bleed air from the tube/head or tube/cap juncture. The air is bleed from the cylinder by backing out the straight thread metallic seal plug to allow air to pass by the threads. hen air bubbles stop and oil starts to flow, retighten plug. It is recommended that bleeding be done with pressure on the opposite end of the cylinder so that the bleed plug is not subjected to pump pressure when being backed out. ir bleeds should always be positioned at the highest point of the cylinder tube. Please specify positions of air bleeds by position number. StarNite Head and Cap Option Code M This option will give you a black finish resistant to corrosion for outside applications or caustic washdown, and really hard to scratch due to the hardness of the part after the chemical process of the StarNite. See page for more detail. Tubing, tie rods and rod are already process with StarNite. Metallic Rod Scraper Option ggressively Scrapes the exposed portion of the piston rod free of weld splatter, paint spray, abrasive powders or many other foreign materials that could damage the rod seal. Chrome Rod Or Nitrotec Rod Option Code R or R e still can supply old technology, for that matter you can request Chrome Rod (R) Or Nitrotec Rod (R). ND O STRO SNSOR Option Code (_) & H(_) O Switches are simple and built to last. ith only one moving part and no metal-to-metal contact forcing it to move, there is nothing to wear out! Must Indicate Position. x : switch will be in position Options vailable - xplosion Proof - SPDT or DPDT - HiTemp to 00 - SubSea Submersible - Hermetically Sealed - High Pressure to 0,000 psi - nglish or metric threads Option Code Option Code H How it orks hen the ferrous cushion of a cylinder enters the sensing area of the switch, it attracts the primary magnet, which pulls the connecting rod forward. s a result, the common contact snaps to its operated position, closing the other contact circuit. hen the target is removed the common contact automatically returns to its original unoperated position. P 5

36 Stop Tube Design and lignment couplers ST5 SRIS Stop Tube Design Drawing Cushion design Drawing Non Cushion design Stop Tube Option Code ST(_) nhances the transverse load carying capability of a long stroke cylinder by increasing the distance between the piston and the rod bearing at full extension when placed on head end. Ideal for applications requiring longer strokes or where additional rod stability is desired. Specify stop tube length when ordering. How To Order Stop Tube option ex: ST5-.5x60x.8-ST-NC00 is a.5 bore with 60 Net stroke and a dual piston stop tube of long, for a total gross stroke of 6 (must be used to calculate overall length L ). Linear lignment Couplers Part # C D H MX PULL T ILD C-50 /-8 7/8 / / 5/8 0.5 /6 / C- 5/6-7/8 / / 5/ / /6 800 C-75C /8-6 7/8 / / 5/ /6 / C-75 /8-7/8 / / 5/ /6 /6 800 C-7 7/6-0 / / / 5/8 9/6 / C-500C /- / / / 5/8 9/6 /8 000 C-500 /-0 / / / 5/8 9/6 /8 000 C-65 5/8-8 / / / 5/8 / /8 000 C-750C /-0 / 5/6 5/6 /8 / 7/8 / 000 C-750 /-6 / 5/6 5/6 /8 / 7/8 / 000 C-875 7/8- / 5/6 5/6 /8 / 7/8 / 000 Starcyl s linear alignment couplers extend the bearing and seal life of your cylinders. Our couplers prevent binding and erratic movement that misalignment causes, which eventually wears down your cylinders. Not only do Starcyl couplers work equally well in push and pull applications, but they allow a greater tolerance between the cylinder center line and the mating member. * Use jam nut to lock coupler to rod when used with full diameter threads. C-000C -8 / 5/6 / 5/8 /8 / / 6000 C / 5/6 / 5/8 /8 / / 6000 C-50 /- / 5/6 / 5/8 /8 / / 6000 C-75 /8- / 5/6 / 5/8 /8 / / 6000 C-500 /- / /8 /6 / / / 000 C-750 /- / /8 /6 / / / 000 C-875 7/8- / 5 7/6 /6 / 7/8 / 0000 C / 5 7/6 /6 / 7/8 / 0000 P 6

37 ST5 SRIS Offer of sales and arranty Offer of Sale The items described in this document are hereby offered for sale at prices to be established by STRCL Cylinder, and its authorized distributors. This offer and its acceptance by any customer ( uyer ) shall be governed by all of the following Terms and Conditions. uyer s order for any item described in its document, when communicated to STRCL cylinder, or an authorized distributor ( Seller ) verbally or in writing, shall constitute acceptance of this offer.. Terms and Conditions of Sale: ll descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller s products are subject to and shall be governed exclusively by the terms and conditions stated herein. uyer s acceptance of any offer to sell is limited to these terms and conditions. ny terms or conditions in addition to, or inconsistent with those stated herein, proposed by uyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between uyer and Seller unless expressly accepted in writing by Seller. Seller s acceptance of any offer to purchase by uyer is expressly conditional upon uyer s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in uyer s offer. cceptance of Seller s products shall in all events constitute such assent.. Payment: Payment shall be made by uyer net 0 days from the date of delivery of the items purchased hereunder. mounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that uyer is late in making payment. ny claims by uyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 0 days after uyer s receipt of the shipment.. Delivery: Unless otherwise provided on the face hereof, delivery shall be made. O.. Seller s plant. Regardless of the method of delivery, however, risk of loss shall pass to uyer upon Seller s delivery to a carrier. ny delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery.. arranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 8 months from date of shipment to uyer. THIS RRNT COMPRISS TH SOL ND NTIR R- RNT PRTININ TO ITMS PROVIDD HRUNDR. SLLR MS NO OTHR RRNT, URNT, OR RPRSNTTION O N IND HT- SOVR. LL OTHR RRNTIS, INCLUDIN UT NOT LIMITD TO, MR- CHNTILIT ND ITNSS OR PURPOS, HTHR XPRSS, IMPLID, OR RISIN OPRTION O, TRD US, OR COURS O DLIN R HR DISCIMD. NOTITHSTNDIN TH OROIN, THR R NO RRNTIS HTSOVR ON ITMS UILT OR CQUIRD HOLL OR PRTILL, TO UR S DSINS OR SPCIICTIONS. 5. Limitation of Remedy: SLLR S LIILIT RISIN ROM OR IN N CONNCTD ITH TH ITMS SOLD OR THIS CONTRCT SHLL LIMITD XCLUSIVL TO RPIR OR RPCMNT O TH ITMS SOLD OR RUND O TH PURCHS PRIC PID UR, T SLLR S SOL OPTION. IN NO VNT SHLL SLLR LIL OR N INCIDNTL, CON- SQUNTIL OR SPCIL DMS O N IND OR NTUR HTSOVR, INCLUDIN UT NOT LIMITD TO LOST PROITS RISIN ROM OR IN N CONNCTD ITH THIS RMNT OR ITMS SOLD HRUNDR, HTHR LLD TO RIS ROM RCH O CONTRCT, XPRSS OR IMPLID RRNT, OR IN TORT, INCLUDIN ITHOUT LIMITTION, NLI- NC, ILUR TO RN OR STRICT LIILIT. 6. Changes, Reschedules and Cancellations: uyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between uyer and Seller unless accepted by Seller in a written amendment to this greement. cceptance of any such requested modification or cancellation shall be at Seller s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special Tooling: tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller s property notwithstanding payment of any charges therefor by uyer. In no event will uyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by uyer therefor. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. uyer s Property: ny designs, tools, patterns, materials, drawings, confidential information or equipment furnished by uyer or any other items which become uyer s property, may be considered obsolete and may be destroyed by Seller after two () consecutive years have elapsed without uyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller s possession or control. 9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. uyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If uyer claims exemption from any sales, use or other tax imposed by any taxing authority, uyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 0. Indemnity or Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 0. Seller will defend and indemnify uyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (hereinafter Intellectual Property Rights ). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against uyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Seller s obligation to defend and indemnify uyer is contingent on uyer notifying Seller within ten (0) days after uyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for uyer the right to continue using said item, replace or modify said item so as to make it non-infringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by uyer, or directed to items delivered hereunder for which the designs are specified in whole or part by uyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing provisions of this Part 0 shall constitute Seller s sole and exclusive liability and uyer s sole and exclusive remedy for infringement of Intellectual Property Rights. If claim is based on information provided by uyer or if the design for an item delivered hereunder is specified in whole or in part by uyer, uyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right.. orce Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter vents of orce Majeure ). vents of orce Majeure shall include without limitation, accidents, act of od, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller s control.. ntire greement/overning Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire greement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This greement shall be governed in all respects by the law of the Province of Quebec, Canada. No actions arising out of the sale of the items sold hereunder or this greement may be brought by either party more than two () years after the cause of the action accrues. P 7

38 HO TO ORDR ST5 SRIS ST5 D -.5 X. X.8 - # ore* Stroke* Rod Dia* TUR DSCRIPTION SMOL SRIS Used in ll ST part number (IR HD) ST Used in ll ST5 part number ST5 TUR Double rod nd DSCRIPTION Used only if double rod cylinder is required P NO. SMOL 8 D ack-to-ack (must request drawing) Position Sensor Temposonic Ready*** X TUR DSCRIPTION P NO. SMOL Mounting Style Head nd Tie Rod xtended 6, 0 X Cap nd Tie Rods xtended 6, 0 X oth nd Tie Rod xtended 6, 0 X Head Rectangular lange 6 Cap Rectangular lange 6 Head Square lange 8 5 Cap Square lange 8 6 Side Lugs 0, S Centerline Lugs 0, S Side Tapped, S Side nd Lugs, S7 Head Trunnion, 6 T Cap Trunnion, 6 T Intermediate ixed Trunnion Xi=(_), 6 T Cap ixed Clevis 6, P Cap Detachable Clevis 6 P Head Square Mount (8 OR ONL) 0 Cap Square Mount (8 OR ONL) 0 Head Rectangular lange 8 5 Spherical Mounting, S TUR Piston Rod Select : nd DSCRIPTION Style # Intermediate Male P NO. 6 to 9 SMOL Style # Small Male # Style # ull Male # Style # Short emale # Style #5 lange Coupling #5 Style #6 Plain #6 Style #7 Spherical female #7 Style #X Special (Specify) #X # * S CTLO PS OR SLCTION O OR ND ROD SIZS COMINTIONS *** VIL STRTIN T.5 OR ITH ROD P 8

39 ST5 SRIS HO TO ORDR -S08 S06 C00 - LU - - P TUR DSCRIPTION SMOL Head Port NPT Port N S Straight Thread O-ring Port S lange Port (C.6) ritish Parallel ritish Tappered R Head Port Size NPT use /=0,/8=06,...,-/=0 S use 0, 06, 08, 0,, 6 look at catalog for std port size Head Ports Location Head Location Std (,,) P = inish Paint M = inish Starnite N = inish Nickel TUR DSCRIPTION SMOL Cap Port NPT Port N S Straight Thread O-ring Port S lange Port (C.6) ritish Parallel ritish Tappered R Cap Port Size NPT use /=0,/8=06,...,-/=0 S use 0, 06, 08, 0,, 6 look at catalog for std port size Cap Ports Cap Location Std (,, & 5*) Location * ackside TUR DSCRIPTION SMOL Cushion Head Non Cushion, Cap Non Cushion C00 & Location Head Cushion Only (where x = position,,,) CX0 Cap Cushion Only (where x = position,,,) C0X Cushion both ends (where x = position,,,) CXX Piston seals Option una U-cup ith ackup Viton U-cup ith Teflon ackup Urethane asymetric U-cup seals (std) Polypack Urethane U-cup Polypack Viton U-cup Hi-Load Piston UMPR SLS (STR ONL) Ring Packed L LV LU PU PV LH S RP Options Rod xtension C= 5 C=(_) Thread xtension = 5 =(_) Rod Scraper 5 leeder (Captive all earing/set screw) pos.,,, 5 (_)* leeder (philips screw type ) pos.,,, 5 (_)* leeder (standard Sae Port) pos.,,, 5 C(_)* luminum Tubing (max 50 psi) 5 T lum. Tube ith Magnet (max 50 psi) 5 T Composite tubing (iberglass/epoxy) T o Switches (round) Position,,, 5 o Switches Cylindicator, Pos, 5 H Stop Tube (length) ST(_) Stop Tube Double piston (length) STD(_) Rod oot R Chomed Rod 5 R Induction Hard Chromed R Nitrotec Rod 5 R Stainless Steel Rod 0 Chromed Rod S Stainless Steel Rod 7- ph Chromed Rod S Tie rods Support (Stroke from 60 and more) TS Port & djustable Cushion Location STD PORT PR OR STD PORT LOCTION HD, CP OR NPT COD S COD / / , / , / / , / / , / , 5 / , 6 /, 8 /, P 9

40 nfpa rod LOC CLinDer...To boldly go where no cylinder has gone before... M TH ORC ITH OU! strl option features.strcl.com SPC SVIN MULTI-STS IR CLINDR enefits ore size from ½" to 0" Stroke up to 0" Save Space up to 5% 50 PSI IR, OIL Two-ear arranty conomic design based on " ore," Stroke STR SRIS STR - Multistage Upgradable air cylinders STR SRIS STR - NP style Mount spacesaver air cylinders HV DUT Hydraulic Cylinders HV DUT SRVIC INDUSTRIL TI ROD CONSTRUCTION STR6 SRIS SO - Space One, Spacesaver ir Cylinder NOMINL PRSSUR PSI STNDRD OR SIZS.5 THROUH 0 PISTON ROD DIMTRS 5/8 THROUH 0 STR SRIS N..P.. Interchangeable. Heavy Duty ir Cylinders lush Mount standard..strcl.com ore sizes rom.5 through Strokes - available to any practical length Large Clamping Surface IP67 Rated [exceeds NM X] ast Response Time xtremely Low acklash 8 standard Mounting Styles djustable ir Cushion Standard 50 PSI IR/OIL Two ear arranty conomic Design Spring-ngaged Units Rated for,750,000 Cycles bar [60 psi] Release Pressure Maintains ccurate Positioning Consistent Clamping orce Suitable for ash-down reas High Cycle Rates, ccuracy Precision Holding Holds Load During Power/Pressure Loss Long, Maintenance-ree Life Compact Unit, asy Integration road pplication STR - Heavy Duty NP interchangeable air cylinders luminum construction STRL - NP Rod Lock for STR air cylinders MULTI-STS M SRIS MULTI-STS NP MOUNT HV DUT - HIH LO NOMINL PRSSUR -IR 50 PSI ISOMTRIC STNDRD OR SIZS.5 THROUH 0 STO UP TO 8 STNDRD MOUNTIN S NP MOUNT STRNITTM VIL ON LL STL PRTS TO-R RRNT STR6 - Heavy Duty NP interchangeable Hydraulic cylinders, 000 psi No Rod Displacement on ngagement M - Heavy Duty NP Multi-stages air cylinders High low SRIS.STRCL.COM IR CLINDR ISO/VDM ISO 6 & 555 ST - Isometric series ISO 6 & 555 ir Cylinder.STRCL.COM OUR STRCL DISTRIUTOR: 877-STRCL X: (60) 8-7 ST5-SPT IN CND: PH: X

Series VH Hydraulic Cylinders

Series VH Hydraulic Cylinders Series VH Series VH very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,

More information

Series VH Hydraulic Cylinders

Series VH Hydraulic Cylinders Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,

More information

FULL COLOR TAB #7 MSE, MSR

FULL COLOR TAB #7 MSE, MSR FULL COLOR TAB #7 MSE, MSR 117 MS - How to Order FORCE MULTIPLYING CYLINDERS SERIES MS : MULTI-STAGE The TRD MSE and MSR Series are double acting, single rod end cylinders that multiply the force output

More information

Douce Hydro. Serie DHI - MT4 - Center trunnion mounting - 1 -

Douce Hydro. Serie DHI - MT4 - Center trunnion mounting - 1 - Standard specifications: Heavy duty hydraulic cylinders - 3000 PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B93.1 191 Serie DHI - MT - Center trunnion mounting

More information

Inch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer

Inch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer Hydraulic Seals Inch / Cross Type Metric Section Style Material Page Standard 92 Durometer Urethane 7-11 with 70 Durometer Nitrile Energizer Inch Deep Style 92 Durometer Urethane 12-16 with 70 Durometer

More information

HEAVY DUTY SERVICES INDUSTRIAL TIE ROD CONSTRUCTION NOMINAL PRESSURE PSI STANDARD BORE SIZES 1.5 THROUGH 6 PISTON ROD DIAMETERS 5/8 THROUGH 4

HEAVY DUTY SERVICES INDUSTRIAL TIE ROD CONSTRUCTION NOMINAL PRESSURE PSI STANDARD BORE SIZES 1.5 THROUGH 6 PISTON ROD DIAMETERS 5/8 THROUGH 4 H DUT SIS INDUSTIL TI OD ONSTUTION NOMINL PSSU - 000 PSI STNDD O SIZS.5 THOUH 6 PISTON OD DIMTS 5/8 THOUH 8 STNDD MOUNTIN STLS STNIT ILL ON STL PTS ylinder Design eatures, Standard Piston ST6 SIS Piston

More information

Universal Compact Extruded Cylinders

Universal Compact Extruded Cylinders Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally

More information

TILBURY STEEL SERVICE CENTRE

TILBURY STEEL SERVICE CENTRE TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury

More information

Features. Specification. Model. Tube I.D. (mm) Medium Operating pressure range. Proof pressure. Ambient temperature. Available speed range

Features. Specification. Model. Tube I.D. (mm) Medium Operating pressure range. Proof pressure. Ambient temperature. Available speed range series eatures Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

More information

SCHMIDT PneumaticPress

SCHMIDT PneumaticPress Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing

More information

Inductive Cylinder Position Sensors

Inductive Cylinder Position Sensors Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs

More information

SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data

SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for

More information

Data is only for informational purpose. All specifications are subject to change without notice.

Data is only for informational purpose. All specifications are subject to change without notice. MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV

More information

Dual rod cylinder with guide function for pick & place applications.

Dual rod cylinder with guide function for pick & place applications. ual Rod ylinder Series XS ø, ø, ø, ø, ø, ø32 ual rod cylinder with guide function for pick & place applications. Series XS Twice the thrust on-rotating accuracy ±. X TS Y Y G X - - ata all bushing bearings

More information

Ball Screw Actuator Models Advantages:

Ball Screw Actuator Models Advantages: Ball Screw Actuator Models Advantages:! Move loads and apply force more efficiently than other mechanical actuators.! Permit faster operation and longer life under load.! Require less power by providing

More information

Link-Belt Centrik-Lok CL Series Overview. Link-Belt Centrik-Lok CL Series

Link-Belt Centrik-Lok CL Series Overview. Link-Belt Centrik-Lok CL Series Link-elt Centrik-Lok CL Series Overview Link-elt Centrik-Lok CL Series Rexnord proudly introduces an improved design for concentric locking mounted ball bearings. Utilized in demanding applications that

More information

Mini slides SLT/SLS/SLF

Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Precision, rigid guide Highly flexible Adjustable end position cushioning 03/10 Subject to change Products 04/05 1 / 1 Mini slides SLT/SLS/SLF Features SLS SLF SLT SLT/SLS/SLF SLT

More information

Compact Bellows Pumps

Compact Bellows Pumps Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray

More information

SINGLE OR DOUBLE ACTING CYLINDERS, Ø 8 to 25 mm

SINGLE OR DOUBLE ACTING CYLINDERS, Ø 8 to 25 mm SINGLE OR DOUBLE ACTING CYLINDERS, to mm CONFORMING WITH ISO 43 - CETOP - AFNOR STANDARDS ISOCLAIR - SERIES 435 - TYPES : C-AS, CC-AS P-GB-R5 ISOCLAIR AIR CYLINDERS to mm OPERATIONAL DIAGRAMS ( to mm)

More information

Product Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r

Product Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r Product Bulletin BPS-00 C l a m p P i p e C o n n e c t o r Table of Contents BlueSky Clamp Connector... Industrial Applications... Clamp Connector Description... How the Metal to Metal Seal Works... Design

More information

ICD Parker Configuration System Quick Reference Guide

ICD Parker Configuration System Quick Reference Guide Model Number 4.00BB2HLU14A5.000 1.00 R1.75 R1.63 2H Heavy Duty Hydraulic Tie Rod Cylinders English Model Number 4.00BB2HLU14A5.000 LIST $1297.35 LIST $1297.35 (UNITED STATES DOLLAR) +.000 2.374 -.002 1.750

More information

Subsea Valves.

Subsea Valves. Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:

More information

This is trial version

This is trial version s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1

More information

Standard Releasing Spear. Manual B215

Standard Releasing Spear. Manual B215 Standard Releasing Spear Manual B215 NOTES Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type

More information

Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart

Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance

More information

Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447

Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447 Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake

More information

RL-H80 PARTS LIST # K

RL-H80 PARTS LIST # K RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN

More information

RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No

RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description

More information

FISCHER MINIMAX TM SERIES

FISCHER MINIMAX TM SERIES TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases

More information

UNIFLEX TRIPLE SPRING COUPLING

UNIFLEX TRIPLE SPRING COUPLING Specialty Couplings Overview Uniflex Coupling Design Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design The Uniflex Coupling is an all steel, single piece coupling that solves a variety

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Series 1300 Individual mounting Series sub-base plug-in 35 100 Pilot air accumulator Internal pilot supply check valve Moisture and dust seal Manual operator

More information

Weld Fittings Ultrahigh-Purity and Industrial

Weld Fittings Ultrahigh-Purity and Industrial www.swagelok.com Catalog Title Weld ittings Ultrahigh-Purity and Industrial / to in. and to mm 3, 3, 3 VR, and 3 VIM/VR stainless steel materials ittings for manual or automatic welding equipment 2 Weld

More information

Search our Entire Inventory at Call for your password today.

Search our Entire Inventory at  Call for your password today. Section 4 HARDWARE USA & CANADA: ONLINE: INTERNATIONAL: 800-332-2500 Phone www.allpointsfps.com +1-860-738-7112 Phone 800-227-1511 Fax custserv@allpointsfps.com +1-860-201-1119 Fax Online at: www.allpointsfps.com

More information

Standard Bellows Metering Pumps

Standard Bellows Metering Pumps Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke

More information

Features: Quality Testing and Documentation

Features: Quality Testing and Documentation 1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice

More information

RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols

RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols /2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service

More information

Composite Push-In Fittings - NPTF/INCH

Composite Push-In Fittings - NPTF/INCH composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining

More information

Item 305D 3-Piece Ball Valve

Item 305D 3-Piece Ball Valve ZIPSON'S 0, -piece high performance ball valve with ISO direct mounting pad is designed for the high pressure industrial pipe line in full port product. To compare the economic valve in the market, Zipson

More information

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &

More information

Features. Specification. Model. Tube I.D. (mm) Medium. Operating pressure range. Proof pressure. Ambient temperature. Available speed range

Features. Specification. Model. Tube I.D. (mm) Medium. Operating pressure range. Proof pressure. Ambient temperature. Available speed range MQV * series Features Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to

More information

Specification. Radiamatic Detectors and Accessories

Specification. Radiamatic Detectors and Accessories 4/92 Page 1 of 8 Radiamatic Detectors and Accessories Specification Function The Radiamatic temperature detector generates an emf proportional to the temperature of the object sighted. It is used with

More information

Compliance with API Standard 670 the PRO Product Standard for Proximity Probes

Compliance with API Standard 670 the PRO Product Standard for Proximity Probes Connection Technology Center, Inc. 7939 Rae Boulevard Victor, New York 14564 Toll Free: (800) 999-5290 Phone: (585) 924-5900 Fax: (585) 924-4680 Compliance with API Standard 670 the PRO Product Standard

More information

R./57100/M, R./57300/M, Roundline cylinder Magnetic piston, single acting

R./57100/M, R./57300/M, Roundline cylinder Magnetic piston, single acting R./700/M, R./700/M, Roundline cylinder > >... 0 mm > > Saves 0% space over the basic length of a corresponding ISO/ VDM cylinder > > Standard magnetic piston for full control system versatility > > Low

More information

MultiPort Ball Valves

MultiPort Ball Valves Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort

More information

LCC Pump Series - Wear Resistant, High Performance Slurry Pumps

LCC Pump Series - Wear Resistant, High Performance Slurry Pumps LCC Pump Series - Wear Resistant, High Performance Slurry Pumps 02 LCC Pump Series Solutions for the most Abrasive and Corrosive Slurry Applications With High Performance Wear Resistance, the GIW Minerals

More information

Rexroth Linear Bushings and Shafts, GreenLight Selection

Rexroth Linear Bushings and Shafts, GreenLight Selection 4 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Rexroth Linear Bushings and Shafts, GreenLight Selection Bosch Rexroth is the global leader in metric bushings. Whether you need standard bushings

More information

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator

More information

72 Heavy Duty Dual Trim Deck Parts Manual

72 Heavy Duty Dual Trim Deck Parts Manual 2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter

More information

TO FIND INDIVIDUAL SPECIFICATIONS OF STANDARD CONTACTS, PLEASE CONSULT OUR SEARCH ENGINE AT

TO FIND INDIVIDUAL SPECIFICATIONS OF STANDARD CONTACTS, PLEASE CONSULT OUR SEARCH ENGINE AT CONTACT TECHNOLOGY INTRODUCTION Preci-Dip, a world wide leading manufacturer of precision machined contacts and related interconnect components is continuously improving its ability to design innovative

More information

GoTo Europe Focused Delivery Program

GoTo Europe Focused Delivery Program GoTo Europe Focused Delivery Program Product Produktübersicht Overview Lineartechnik Motion Technology 2 GoTo Europe The products I need when I need them In today s global competition every day counts.

More information

T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable

T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow

More information

Heavy Industrial Shock Absorbers ECA 2 to ECA 4 Self-Compensating

Heavy Industrial Shock Absorbers ECA 2 to ECA 4 Self-Compensating 67 Heavy Industrial Shock Absorbers ECA to ECA 4 Enertrols durable ECA, ECA 3 and 4" Bore Series of self-compensating shock absorbers have been designed to handle extremely heavy-duty applications and

More information

Hydraulic Cylinders and Lifting Products

Hydraulic Cylinders and Lifting Products Hydraulic s and Lifting Products Enerpac hydraulic cylinders are available in hundreds of different configurations. Whatever the industrial application... lifting, pushing, pull ing, bending, holding...

More information

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm

More information

Quick Coupling Products

Quick Coupling Products Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series 800 Vertical

More information

Model RFM. Model RFM. Materials and Specifications. Residential Fire Meter Sizes 3/4", 1", 1-1/2" and 2" Features 1" RFM 50 2" RFM 160

Model RFM. Model RFM. Materials and Specifications. Residential Fire Meter Sizes 3/4, 1, 1-1/2 and 2 Features 1 RFM 50 2 RFM 160 Residential Fire Meter Sizes 3/4", 1", 11/2" and 2" Features APPLICATIONS: The Hersey Residential Fire Meter (RFM) is specifically designed for use in residential fire protection systems or combination

More information

Connectivity Products

Connectivity Products Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes

More information

Cylinders. CGT Series. Compact Guide Slides. We re everywhere you need us to be! 141

Cylinders. CGT Series. Compact Guide Slides. We re everywhere you need us to be!  141 We re everywhere you need us to be! CGT Series Compact Guide Slides Pneumatic-Catalogue-GB-28-1 www.numatics.com 141 CGT Series : CGT Series General Information CGT Series is ideal where high load and

More information

WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp

WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated

More information

Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX

Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle

More information

Dura-ConTM Hermetic Connectors

Dura-ConTM Hermetic Connectors Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard

More information

RM/92000/M, Short stroke cylinder Magnetic piston, double acting

RM/92000/M, Short stroke cylinder Magnetic piston, double acting > Ø... 00 mm > One third the basic length of a corresponding ISO/VDM model > Fully non-corrodible specification > Standard magnetic piston for full control system versatility > Low friction, long life

More information

4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized.

4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized. Swivel Joints Table of Contents Advantages of using Eaton Swivel Joints 2 Selection Criteria and Product Safety Considerations 3 FS6500 4 Features and Benefits 4 Performance Testing 4 Repair Kit 10 BD5500

More information

Parts and Service Manual IMCO

Parts and Service Manual IMCO XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF

More information

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183 North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06

More information

Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX

Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle

More information

VSG, VSL, VSKH and VSKV Two-line Metering Devices

VSG, VSL, VSKH and VSKV Two-line Metering Devices VSG-KR These high quality, galvanized steel metering devices are designed for high-pressure (up to 400 bar) two-line systems. They can also be used in low to medium-pressure systems. They are available

More information

DI-ACRO #24 HAND SHEAR INSTRUCTION MANUAL

DI-ACRO #24 HAND SHEAR INSTRUCTION MANUAL DI-ACRO #24 HAND SHEAR INSTRUCTION MANUAL REV. G 6/12 1 TABLE OF CONTENTS A. SAFETY INFORMATION PG. 3 B. SET UP PROCEDURE PG. 3 C. MAINTENANCE PG. 3 D. TECHNICAL DATA PG. 3 E. OPERATING PROCEDURES PG.

More information

MarTest. Test Indicators

MarTest. Test Indicators - - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)

More information

Cool Drawer Single Sensor

Cool Drawer Single Sensor The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor

More information

MarTest. Test Indicators

MarTest. Test Indicators - - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm

More information

+ B-STYLE HOSE SETS A-STYLE HOSE SETS DOUBLE HOSE CONNECTION NPT THREADED LOCKING SAFETY PINS PUMP FLANGES A-STYLE LOCKING BAR A-STYLE PUMP FITTINGS

+ B-STYLE HOSE SETS A-STYLE HOSE SETS DOUBLE HOSE CONNECTION NPT THREADED LOCKING SAFETY PINS PUMP FLANGES A-STYLE LOCKING BAR A-STYLE PUMP FITTINGS -STYLE HOSE SETS 1 -STYLE HOSE SETS DOULE HOSE ONNETION NPT THREDED LOKING SFETY PINS PUMP FLNGES -STYLE LOKING R -STYLE PUMP FITTINGS ELOWS INRESERS REDUERS T s Y s END PLUGS END PS DOULE MLES DOULE FEMLES

More information

Rod Seal OR Profile. OR Profile, Rotary PTFE Cap Seal

Rod Seal OR Profile. OR Profile, Rotary PTFE Cap Seal Seal, Rotary PTFE ap Seal atalog EPS 370/US The Parker OR profile is a bi-directional rod seal for use in pneumatic and low to medium duty rotary or oscillating applications. The OR profile is a two piece

More information

TH ST N OAK PARK HEIGHTS, MN P F

TH ST N OAK PARK HEIGHTS, MN P F 12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM SAFETY INFORMATION PG. 3 SET UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 OPERATING PROCEDURES PG.

More information

AREA LIGHT GT SERIES FEATURES & BENEFITS TECHNICAL PARAMETERS

AREA LIGHT GT SERIES FEATURES & BENEFITS TECHNICAL PARAMETERS AREA LIGHT GT SERIES The Arcadia GT Series Area Lights are high performance parking lot solution with an updated shoe box design. An efficient modular design combined with the right lens type will provide

More information

Excellent in separation of two different fluids under pressure Compact design and groove structure allow interchangability with the Hallite P54

Excellent in separation of two different fluids under pressure Compact design and groove structure allow interchangability with the Hallite P54 PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite GPS is a double-acting piston seal utilizing Hallite s high-performance Armorlene HLX PTFE paired with an elastomer energizer and x-ring for optimum

More information

T E M P O S O N I C S I I I INSTALLATION

T E M P O S O N I C S I I I INSTALLATION T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *

More information

MTA-156 IDC Quad Connectors

MTA-156 IDC Quad Connectors MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru

More information

8 Submersible Motors Standard

8 Submersible Motors Standard Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield

More information

M10 / M12 M12 / M16 M16 / M20 M20 M20 M25 M32 M40 M50 / M / 13,5 13,

M10 / M12 M12 / M16 M16 / M20 M20 M20 M25 M32 M40 M50 / M / 13,5 13, Multitite F grey: Light and flexible. Type F is, among others, being used in the buildingindustry, connection of control panels and protection against rodents. F is applied for quick and easy mounting

More information

pneumatic push-in fittings system LF 3000

pneumatic push-in fittings system LF 3000 pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55

More information

Wiper AY Profile. AY Profile, Premium Double-Lipped Wiper. Technical Data.

Wiper AY Profile. AY Profile, Premium Double-Lipped Wiper. Technical Data. Wiper Y Y, Premium Double-Lipped Wiper Catalog PS 5370/US The Y profile can be used as a heavy to light duty wiper. When used in high pressure applications in conjunction with the proper Parker rod seals,

More information

Fits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"

Fits 1 3/4 Resilient Rings. Part # Shaft Height A 92-A /4 4.4 92-A /4 4.6 Fits 2 1/2 Resilient Rings. Part # Shaft Height A Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end

More information

BELLOWS COVERS AND.

BELLOWS COVERS AND. BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance

More information

Contents. Next Page. Previous View HDT. Heavy-Duty Tripod Range. Vinten Camera Control Solutions

Contents. Next Page. Previous View HDT. Heavy-Duty Tripod Range. Vinten Camera Control Solutions HDT Heavy-Duty Tripod Range Vinten Camera Control Solutions HDT HEAVY-DUTY TRIPODS SPARES & REPAIRS PUBLICATION PART No. 390-9 ISSUE Copyright Vinten Broadcast Limited 004 All rights reserved throughout

More information

Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...

Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized... Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...

More information

RT2Y Compact temperature switch intrinsic safety

RT2Y Compact temperature switch intrinsic safety ompact temperature switch intrinsic safety Main Features Excellent repeatability Fix dead band for control and alarm Resistant to accidental overtemperature Intrinsic safety Hazardous area 0, 1, 2 pplications

More information

YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.

YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. - and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous

More information

TITAN-360 PARTS MANUAL Chief Automotive Technologies A DOVER COMPANY

TITAN-360 PARTS MANUAL Chief Automotive Technologies A DOVER COMPANY TITAN-0 A DOVER COMPANY 00 Chief Automotive Technologies TITAN-0 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies warrants for one year from the date of installation and/or purchase

More information

STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED

STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3

More information

PN Gold Mounted Ball Bearings

PN Gold Mounted Ball Bearings PN Gold Mounted Ball Bearings PN Gold with high strength reinforced composite housing PN Gold with 1 passivated stainless steel housing PN Gold Extended Bearing Life for Highly Corrosive Environments Reinforcing

More information

Section 8 Linear Applications

Section 8 Linear Applications Index Section 8 187 Slide Blocks Slide Blocks is stationary, or a profile slides in the Profile Blocks Stationary Block Profile Stationary 188 Slide Blocks UHMW-PE Design Information ASTM Typical General

More information

Bulletin 871D Cylinder Position Inductive Style

Bulletin 871D Cylinder Position Inductive Style Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal

More information

Terminals, Lugs, and Fasteners

Terminals, Lugs, and Fasteners Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying

More information

LF3800 stainless steel push-to-connect fittings

LF3800 stainless steel push-to-connect fittings 3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider

More information

P F

P F 12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM Copyright 2014 REV. 9-MAY-2014 1 SAFETY INFORMATION PG. 3 SET-UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA

More information