US411Z/US811Z-WS RVH1004Z/RVH1008Z Quick Start Guide

Transcription

1 US411Z/US811Z-WS RVH1004Z/RVH1008Z Quick Start Guide 1. Packing...P2 2. Hard Disk Installation...P3 3. Front Panel Controls...P4 4. Rear Panel Connectors...P5 5. Live Operations...P6 6. Playback Operations...P9 I-Phone & Android (IWatch DVR) Default Username is Admin Default Admin Lock password is Note: Please see CD included for complete User manual quick start guide CMS software and much more

2 1. DVR 2. Quick Start 3. IR Remote Control 4. Battery 5. CD 7. Screws 8. Power Adaptor 9. CCTV in Operation sticker 10. BNC to RCA adapter 11. SATA Cord Note: Standard shipping products do not include Hard Drive unless you had Ordered your DVR with Hard Drive. All Hard Drives if ordered comes preinstalled and ready to use Z/811Z Quick Start Guide V1.0(WS05)- P.2

3 Step1) :Take out the screws as pictures show Back panel 3 screws Left 1 screw Right 1 screw Step 2 ) :Open the cover follow the arrow direction Z/811Z Quick Start Guide V1.0(WS05)- P.3

4 Step3):Connect SATA & Power wire to Hard Disk and put it on right position of t he bottom case Step4):Fix the Hard Disk with four screws on the bottom case as the picture indicated Step5):Put the cover back and fix it with 5 screws as Step 1 indicated Z/811Z Quick Start Guide V1.0(WS05)- P.4

5 Note: After installation, please initialize Hard Disk before starting to record. For more detailed information, please check out User Manual 4-9 Utility Setup for reference ENTER In SETUP mode, press to enter values. In PLAYBACK mode, switch between full, quad, 9-channel, 16-channel display in order. 2 / In SETUP mode, press to move cursor down. In PLAYBACK mode, press to stop playing back. / SLOW In SETUP mode, press to move cursor up. In PLAYBACK mode, press to slow down. / In SETUP mode, press to increase value. In PLAYBACK mode press to play forwards. / In SETUP mode, press to reduce value. In PLAYBACK mode, press to play rewind. 3LED Display (From left to right) 4 USB USB IR Sensor Power: Power is on. HDD: Hard disk is in use. LAN: Connected to the internet (in red): Remote user logged in. REC: Recording. PLAY: Playing back. Port for USB external devices. Port for USB mouse devices. Input sensor for the remote control. 7 REC 8 PLAY 9 T-SRH 10 BACKUP/ESC 11 PIP 12 ZOOM 13 AUTO 14 MENU Start or stop recording. Play back in normal speed. Display the search menu. In LIVE mode, press to display the BACKUP menu. In SETUP mode, press to return to previous page. In LIVE mode, display with picture in picture format. In LIVE or PLAYBACK mode, enlarge the display of a channel. Auto Sequence display. In LIVE mode, press to display menu. In PLAYBACK mode, press to pause playback Z/811Z Quick Start Guide V1.0(WS05)- P.5

6 8CH REAR PANEL CONNECTORS VGA 2 DC 12V 3 MAIN/SPOT monitor 4 VIDEO IN 5 AUDIO IN 6 AUDIO OUT 7 RS485 8 LAN 9 USB 2.0 VGA port DC 12V power jack MAIN/SPOT monitor BNC Video output For cameras BNC input,8 ports RCA input( For CH1) RCA output ( For CH1) RS-485 for PTZ Network port For mouse Z/811Z Quick Start Guide V1.0(WS05)- P.6

7 4CH REAR PANEL CONNECTORS DC 12V 2 VIDEO OUT 3 VIDEO IN 4 AUDIO IN 5 AUDIO OUT 6 VGA 7 USB 8 RS LAN DC 12V power jack MAIN/SPOT monitor BNC Video output For cameras BNC input,4 ports RCA input( For CH1) RCA output ( For CH1) VGA port For mouse RS-485 for PTZ Network port Z/811Z Quick Start Guide V1.0(WS05)- P.7

8 You can monitor all the channels, listen to audio signal and have some related operations under LIVE mode. This paragraph describes the IR remote control, mouse operation and on screen graphical icons under LIVE mode. Table 5-1 Functions of remote control under LIVE mode Button REC Start/Stop recording. PLAY Start playing back the most recently recorded segment. ENTER/MODE Switch to full screen, quad display. MENU/ Enable/ Disable setup Menu. BK-UP Enable/ Disable backup menu. ESC Return last menu Z/811Z Quick Start Guide V1.0(WS05)- P.8

9 Table 5-2 Graphical icons displaying after right-clicking your mouse under LIVE mode. Icon Resting the cursor on this icon will bring up the following four menu icons. Main menu. Search menu. Backup menu. PTZ mode. Turn on/off recording. Playback. Resting the cursor on this icon will bring up the following five display icons. FREEZE. PIP, picture in picture ZOOM, double the screen size AUTO-sequence LOCK, activate the key lock. Full screen display. Quad display. 9-channel display Z/811Z Quick Start Guide V1.0(WS05)- P.9

10 Table 5-3 of on screen graphical icons in LIVE mode Icon Recording is on 1~4 Live Audio is on Live Audio is off Motion detected on the channel Video loss detected on the channel USB device detected Connected to the LAN cable. Film:Normal Recording Clock:Schedule Recording AUTO-seq is on 2X 2X zoom in is on Freeze is on, screen is frozen LOCK is on Shows the current hard disk space has been used (99% mean used 99%, remain 1%) Lower right of each CH will show the current time Icon / / Image quality (High/Low) Full screen Record Snap shot Record and snap shot file saving path setup Enable / Disable Shortcut Toolbar Z/811Z Quick Start Guide V1.0(WS05)- P.10

11 Under LIVE mode, press PLAY to playback (default setup is quad display.) When the icon is shown on the screen, the function icons will appear in the right down corner on the screen. The icon can be dragged by mouse to other location on the screen. Table 6-1 Remote control functions under the PLAYBACK mode Icon ENTER/ MODE Switch to full screen, quad display. MENU / Turn on/off PAUSE. PLAY Play back at normal speed. / SLOW Play back at slower speed. The speed will be slowed to 1/2, 1/4, 1/8, 1/16 by each pressing of the button till the slowest limitation of 1/16 of the normal speed. Current playback speed is shown in the upper right corner. / Fast rewind. Each press increases the speed to the next level. There are six speeds: 2x, 4X, 8X, 16x, 32X and 64X. / Fast forward. Each press increases the speed to the next level. There are six speeds: 2x, 4X, 8X, 16x, 32X and 64X. / Stop playback. Table 6-2 The mouse operation under the PLAYBACK mode. Icon / Fast rewind / Fast forward / Play/pause / SLOW,slow playback / stop playback Playback channel by channel with snap shot display Full screen display Quad display 9-channel display Zoom-in display P.S. If playback of a single channel is wished to be viewed, please double click o n left key of the mouse on the channel video image Z/811Z Quick Start Guide V1.0(WS05)- P.11

12 Under LIVE mode, press PTZ to enter PTZ camera mode. The function icons will appear right down corner on the screen, which can be dragged by mouse to other location on the screen. Table 8-1 Remote Control functions under the PTZ mode Button / SLOW Move PTZ up / Move PTZ down / Move PTZ to the left / Move PTZ to the right ZOOM + PTZ zoom-in ZOOM - PTZ zoom-out FOCUS + FOCUS - IRIS + IRIS - TOUR PRESET+ Number PLAY+ Number PIP FREEZE ZOOM PTZ focus-in PTZ focus-out PTZ iris-open PTZ iris-close Make PTZ monitor pre-set locations in order* Setup the Preset location Press PRESET key first then two-digit number; DVR will set the current PTZ location at enter ed preset number. Go to Preset location Press PLAY key first then two-digit number, PTZ will go to the correspondent preset number location. Setup the beginning location for the Auto Patrol. * Auto patrol (in line scan) * Set up the ending location for the Auto Patrol. * *PTZ communication protocols from different brands aren t compatible 100% some times. Therefore, some of these functions may be unavailable Z/811Z Quick Start Guide V1.0(WS05)- P.12

13 Table 8-2 Mouse operation under the PTZ mode Icon Leave PTZ Mode,back to the LIVE mode Pre-set number N. (0~255) Go to pre-set number N. Set current PTZ location at pre-set number N. TOUR,press to activate pre-set tour* PIP,Set current PTZ location as the start of line-scan. * FREEZE, Activate line-scan. * ZOOM,Set current PTZ location as the end of line-scan. * To move PTZ in 360 PTZ zoom in; PTZ zoom out PTZ focus in; PTZ focus out. PTZ IRIS open, PTZ IRIS close. Below functions need support from specific PTZ manufacturer. Please check user manual of your PTZ for more detail. to AUX 1~8, AUTO Key + Number key 1~8 Backup, Customized function *PTZ communication protocols from different brands aren t compatible 100% sometimes. Therefore, some of these functions may be unavailable Z/811Z Quick Start Guide V1.0(WS05)- P.13