2700 K, 3500 K, 4000 K, Static Red, Static Green, Static Blue, Static Amber FIXTURE WATTAGE (TOTAL WATTAGE)

Transcription

1 CES Mount ITEM Specification optics Beam Angles,,,, output Color Temperatures - total POWER CONSUMPTION (W/ft) - LUMENS - EFFICACY (lm/w) - CRI - Max Candela (CD / m 2 ) (3.5W/ft fixture meets current ASHRAE requirements) Lumen Maintenance 2700 K, 3500 K, 4000 K, Static Red, Static Green, Static Blue, Static Amber FIXTURE WATTAGE (TOTAL WATTAGE) 6 (7.9 W/ft) 12 (16.4 W/ft) White: 75,000 hrs L70 WHITE LIGHT (4000K) (4 foot fixture) OPTICS LUMENS EFFICACY CRI MAX CANDELA Electrical Input Voltage 120V to 277V - MEDLEY View: Integral Power lm/w 60 lm/w 61 lm/w 57 lm/w 79 lm/w 56 lm/w 50 lm/w 51 lm/w 48 lm/w 77 lm/w 54 lm/w 52 lm/w 53 lm/w 50 lm/w 70 lm/w 55 lm/w 50 lm/w 51 lm/w 48 lm/w Control Physical Dimensions (Height X Width) Housing Medley View: X Aluminum extrusion with cast aluminum end caps, powder-coated finish Lens Operating Temperature Impact Resistant Acrylic -20 C to 40 C Certification Certification Medley View are ETL approved for wet locations. Warranty 5 Year Limited All products are tested to IES LM-79, LM-80 and ANSI C78.377A standards OPTICS RoHS COMPLIANT 5 Year Limited Warranty SEE ORDERING INFORMATION ON PAGE 2 Rio Rancho, NM Tel: /28/14 Page 1 of 6

2 ORDERING INFORMATION STEP 1 SELECT FIXTURE Prefix Wattage (Watts/ft) Color TEMPerature or color Optics light direction Mounting Location Options MVW W/Ft MEETS CURRENT ASHRAE REQUIRE- MENTS 6 6 W/FT W/Ft W/Ft U = Uplight D = Downlight CES-3.5 Close End, 3.5" offset Single CES-6 Close End, 6" offset Single CES-8 Close End, 8" offset Single SMS Surface Mount Single EAS-X Extended Arm Single (X = Arm length) 24" 36" 48" Contact factory for 17W/ft, fixtures Integral INT-1 = 120V integral power supply INT-2 = 277V integral power supply 17W: contact factory for fixture Load not to exceed 16 amps For feed thru wiring, see ACV option. Integral dimming (0-10v) IDIM-1 = 120V Integral dimming power supply IDIM-2 = 277V Integral dimming power supply 17W: contact factory for fixture Load not to exceed 16 amps For feed thru wiring, see ACV option. TW White TBL Black TBR Bronze TN Natural TS Sandstone SF # Specify CC # Custom Color # Contact factory ACV Feed thru wiring 24" minimum fixture length is required AC cables must be ordered with ACV, see STEP 2 below Load not to exceed 12 amps CRF Corrosion Resistant CRF is recommended for coastal or extreme exterior environments 17W Notes: Contact factory for fixture CONTACT FACTORY FOR ADDITIONAL COLOR TEMPERATURES Ordering Example: MVW / 17 / 27K / / D / CES / 48 / INT-1 / LV Prefix Wattage Color TEMPerature or color Optics light direction Mounting Location Options MVW STEP 2 CABLING - ORDER SEPARATELY ACV Option (For feed thru wiring): An AC Jumper is required with each fixture run for connection from fixture to j-box. ACV Option allows for end-to-end fixture connection without additional jumpers. If fixtures are not mounted in an end-to-end continuous manner, AC jumpers are required. CATALOG # DESCRIPTION CATALOG # DESCRIPTION ACJ-2 2' AC Power/Data Jumper ACJ-10 10' AC Power/Data Jumper ACJ-5 5' AC Power/Data Jumper ACJ-25 25' AC Power/Data Jumper Rio Rancho, NM Tel: /28/14 Page 2 of 6

3 CES-3.5, CES-6, ces-8 - close end mount, INTEGRAL POWER SUPPLY CES-3.5" Offset 4-5/8" 3-1/2" CES-6" Offset 7-1/8" 6" CES-8" Offset 9-1/8" 8" 1" ADJUSTABLE 1" ADJUSTABLE 180 (±90 ) 2-1/2" 2-1/2" 2-1/2" Full rotation available 2X 1/4-20 FASTENERS 2-1/2" 24" 36" 48" Dim. A 12-5/8" 24-5/8" 36-5/8" 48-5/8" Contact factory for 17W/ft, fixtures 1-1/4" Dim. B 11-3/4" 23-3/4" 35-3/4" 47-3/4" Dim. C 13-1/2" 25-1/2" 36-1/2" 49-1/2" ces - close end MOUNT with acv option - feed thru wiring - 24" minimum fixture length Input - AC Lead Output - AC Lead 2X 1/4-20 FASTENERS 2-1/2" 24" 36" 48" Dim. A 24-5/8" 36-5/8" 48-5/8" Dim. B 23-3/4" 35-3/4" 47-3/4" Dim. C 25-1/2" 36-1/2" 49-1/2" 1-1/4" 10/28/14 Page 3 of 6

4 SMS - Surface mount, INTEGRAL POWER SUPPLY 4-5/16" ( FIXTURES SHOWN HAVE SINGLE MOUNT PER FIXTURE ) 6-5/16" (24" - 48" FIXTURE) 1-3/4" 9/16" 1-1/8" 24" 36" 48" Dim. A 12-5/8" 24-5/8" 36-5/8" 48-5/8" Dim. B /8" 24-1/8" 36-1/8" Contact factory for 17W/ft, fixtures 9/32" 3/4" 2X.281 SLOT FOR 1/4" FASTENER fixtures have a single mounting bracket per fixture SMS - surface MOUNT with acv option - feed thru wiring for multiple fixture runs - 24" minimum fixture length recommended where continuous lighting is required 9/16" 1-3/4" 1-1/8" 24" 36" 48" 9/32" 3/4" 2X.281 SLOT FOR 1/4" FASTENER Dim. A 24-5/8" 36-5/8" 48-5/8" Dim. B 12-1/8" 24-1/8" 36-1/8" 10/28/14 Page 4 of 6

5 MEDLEY SOLID STATE LIGHTING STATIC WHITE LIGHT, STATIC COLORS & DIMMING SPECIFY 6",, 18" EAS - extended arm mount, INTEGRAL POWER SUPPLY SPECIFY: 6",, 18" 24" - 48" FIXTURE FIXTURES SHOWN HAVE SINGLE MOUNT PER FIXTURE 6-5/16" (no connector) TOPconnector) (no SPECIFY 6",SPECIFY, 18" 6",, 18" 24" 36" 48" Dim. A 12-5/8" 24-5/8" 36-5/8" 48-5/8" Dim. B /8" 24-1/8" 36-1/8" SPECIFY WALL OFFSET Dim. C 6" 18" Contact factory for 17W/ft, fixtures eas - extended arm MOUNT with acv option - feed thru wiring - 24" minimum fixture length recommended where continuous lighting is required 24" 36" 48" Dim. A 12-5/8" 24-5/8" 36-5/8" 48-5/8" Dim. B /8" 24-1/8" 36-1/8" SPECIFY WALL OFFSET Dim. C 6" 18" 10/28/14 Page 5 of 6

6 MEDLEY view WHITE LIGHT - integral power supply 4' Lead (no connector) J-box by others. MEDLEY view WHITE LIGHT - integral power supply with acv option 5" Input AC Lead 5" Output AC Lead ACJ-X (Required, order separately) * ACJ-X (If required, order separately) J-box by others. * ACV Option allows for end-to-end fixture connection without additional jumpers. If fixtures are not mounted in an end-to-end continuous manner, AC jumpers may be required. 10/28/14 Page 6 of 6