D4MP-IP-3.6-IR20-WH > > > > > > > IP White Dome Camera 4 Mega Pixel, 3.6MM Lens, P2P, UPnP, PoE

Transcription

1 D4MP-IP-3.6-IR20-WH IP White Dome Camera 4 Mega Pixel, 3.6MM Lens, P2P, UPnP, PoE This is a great cost effective IP dome 4MP camera. D4MP-IP-3.6-IR20-WH will work with the ZUUM APP as a standalone camera, no DVR required for access. You can set it up in seconds with our P2P network. This IP camera also supports UPnP. You can quickly add to our Hybrid TVR (DVR) without ever setting up in the network router or accessing the web browser of the camera. Just set mode switch and select open UPnP in the TVR menu and camera will add automatically to the open network channel you set. Features: 1/3 4 Mega Pixel progressive scan CMOS camera H.264, MJPEG, 4MP real-time recording Supports intrusion detection 2D,3D,DNR,DWDR, Anti-fog, IR-Cut Triple Stream, Mobile APP, P2P Supports PoE, ONVIF IP66 rated for outdoor use Package Includes: IP Dome Camera 1 piece Mounting screw pack x 1 piece Mounting Template x 1 piece Weather proof RJ45 Housing x 1 piece Instructions Warning: - Please use the required power supply in accordance of IEC Power should comply with rated voltage 12 VDC for standard power supply connecting to number 6 in diagram below. If connecting by PoE number 5 in diagram below please make sure it meets the PoE standards. - Camera is rated at IP66. Camera can withstand rain or moisture based on IP66 rating. Camera is not designed to be installed in direct rain or submerged into water. Please see the rating chart for details of the IP66 rating. - Installation of this device should be done by an experienced professional and comply with safety and local regulations. Attention: Before connecting the camera make sure you have selected the correct power supply. Using incorrect power supply will damage the camera. - Please do not drop or strike camera to avoid permanent damage. - Please do not touch the image sensor optical element. If necessary to clean, use a soft clean cloth with alcohol to wipe dust. - Avoid pointing camera toward glare such as direct sunlight or bright lights. It will effect picture quality and effect the life of the product. - Install in temperature range -14 F ~ F, and avoid strong electromagnetic radiation etc. - Maintain ventilation flow around the camera Factory Reset: When camera is powered up or restarts hold the RESET button (7 in diagram below) for 10 seconds. All parameters of the camera will be restored to factory default settings, including username, password, IP address, port number etc. sales@zuum.life * * ZM010617

2 Installation of Camera: No. Name 1 Fixed cover 2 Outer cover 3 Base 4 Sphere 5 10M/100M Ethernet Network Port, POE optional 6 DC12V Power Port 7 RESET: A key to restore factory Settings Sticker Installation: Place installation sticker where you need to mark mounting holes for the camera. Separation of the fixed cover and integral parts: First turn Fixed cover clockwise to remove out of the clasp, remove the fixed cover, as shown here. Install integral parts: Line up the integral parts hole pattern to the sticker hole position, use three screws to fix the camera integral parts in the location installed, as shown here.

3 Side outlet position: If in your installation you need to bring cable harness out from side of the base you can use pliers to clip the plastic section as shown here marked side outlets. Lens angle adjustment: This IP camera has a three-axis adjustment housing. Make the adjustment to reach a desired viewing angle on the camera. Once completed, tighten the fastening screw to hold that mounting view. Install Fixed Cover: Turn cover counter clockwise to attach back to the integral parts of the camera. Complete: Installation of the mounting of the camera is now complete.

4 Viewing Camera: You have a couple ways to view the ZUUM IP camera. 1) FAST WAY and most convenient way when using our IP camera Model: D4MP-IP-3.6-IR20-WH is to connect to our Hybrid TVR s by built in switch. Basically plug the IP cameras into the network or POE switch attached to the network so IP cameras receive power. Then go to your compatible TVR (DVR) and go to the Mode Switch section. This is where you can determine how many analog cameras and IP cameras can connect to the TVR. So for example on a 4 channel TVR you can only have 4 cameras total but they can be any mix of analog, HD analog or IP camera. If you will have just one IP camera connect to the TVR then select which channel that will be in the Mode Switch. After that has been completed then go to the NET Channel Mgt. section where you will see a list of items on your network. Open UPnP. Once you do that you can select the IP camera from the list and it will automatically add it to the TVR. In this example DHCP does not have to be on or any configuration on the IP camera. It is designed to be plug n play using UPnP. 2) The camera is set up as DHCP by default. So if you plug IP camera into your network or router then you can see if it is in the list when you log onto your router. You can also use other tools to scan your network for device detection like Mobile apps. (Fing for example). The name of our network interface card (NIC) is Hangzhou Zenointel. This should be the name you see for our DVR s and IP cameras. You can also use our ZUUM IPC Update tool to search for cameras on the network and make firmware updates using this tool like assigning static IP addresses. You can find this tool on our website when you select Model: D4MP-IP-3.6-IR20-WH under the RESOURCES tab. Once you have IP address that was assigned via DHCP please enter into your browser. You will then see a log on screen as shown below. (Default username: admin) case sensitive (Default Password:123456) The following interface should pop up a link. (Please download the plug-in by clicking here) when you log in. Please click it and install plug-in then restart your browser to log in.

5 NOTE: If there is an ActiveX Control plug in problem open your Internet Explorer and choose Tools/Internet Options/Security/Custom Level, then check Enabled or Pop Up under ActiveX Control and plug-in and set the security level lower. IMPORTANT: When connecting IP cameras to the TVR its best to assign them a static IP. This way if router address changes you do not have to worry about IP cameras and TVR reconnecting. Specification: Model: D4MP-IP-3.6-IR20-WH Sensor 1/3 4MP Progressive Scan CMOS Minimum Illumination Color: 0.05Lux/F1.2, 0 Lux/F1.2 (IR On) Lens 3.6mm IR Distance Up to 65 (20 meters) PoE Power over Ethernet Capability (yes) Browser Supported Windows (IE, Firefox) Power 12VDC 3W Max Temperature Operation: 14 to 140 F Operation Humidity 10% ~ 90% Dimensions Inches 4.51 x 3.46 Weight lbs..62 Do you Need Technical Support? ZUUM is proud to offer free technical support to ensure your product is operating correctly. If you are experiencing difficulties setting up this product, please call us for assistance or visit Here for You 24/7