Accessories. The Leica Geosystems range of accessories for solving your individual survey task

Size: px

Start display at page:

Download "Accessories. The Leica Geosystems range of accessories for solving your individual survey task"

Jayson Beasley
5 years ago
Views:

30 40 50 Accessories The Leica Geosystems range of

1 Accessories The Leica Geosystems range of accessories for solving your individual survey task

Leica Geosystems accessories for surveying For solving your tasks in field and office To carry out survey tasks properly, you need your own knowledge and you need the right instrument.

Leica Geosystems accessories will transform your equipment into a reliable and productive tool.

Tripods, tribrachs and laser plummets Prisms, targets and plumbing poles Usable with any instrument. For attaining the desired accuracy at various ranges. Easy to use, long life, unsurpassed quality.

For every accuracy requirement. Stability, quick setting-up. For the problemfree interchange of instruments, prisms and GPS antennae.

2 Leica Geosystems accessories for surveying For solving your tasks in field and office To carry out survey tasks properly, you need your own knowledge and you need the right instrument. You also need the right accessories because, as in a chain, the weakest member determines the overall performance of the system. Leica Geosystems accessories will transform your equipment into a reliable and productive tool. New product lines We now differentiate between the Professional Series and the Basic Series, so you can match the equipment even more closely to your requirements. Tripods, tribrachs and laser plummets Prisms, targets and plumbing poles Usable with any instrument. For attaining the desired accuracy at various ranges. Easy to use, long life, unsurpassed quality. Batteries, chargers and connecting cables Professional Series: For highest requirements and top accuracies. Basic Series: For routine work, particularly on the building site. For every accuracy requirement. Stability, quick setting-up. For the problemfree interchange of instruments, prisms and GPS antennae. From page 4 onwards From page 8 onwards Indispensable for reliable long-term operation in the field. Leica Geosystems batteries are quality products which will not let you down. From page 12 onwards When reading through, pay attention to these symbols. They will enable you to locate the most suitable product. The table attached to page 15 sets out our recommendations for compiling your outfit. A network of distribution companies spanning the globe forms the basis for competent on-site advice and after-sales service. Our Leica Geosystems survey engineers are always ready to assist you. The list attached to page 31 sets out their telephone and fax numbers. 2

Plummets Various survey accessories Data storage and data transfer by radio modem

Radio modems are now a firmly-established part of modern surveying.

Zenith- and nadir plummets for precise plumbing in surveying, in building

From page 18 onwards Levels and levelling staffs These are decisive for precise

They are used with optical levels and with electronic digital levels.

3 Plummets Various survey accessories Data storage and data transfer by radio modem For safer, faster and simpler data processing and data management. Radio modems are now a firmly-established part of modern surveying. The remote control of total stations opens up a new dimension. Zenith- and nadir plummets for precise plumbing in surveying, in building construction and subsurface work, and in industry. From page 18 onwards Levels and levelling staffs These are decisive for precise height measurements. They are used with optical levels and with electronic digital levels. From page 20 onwards It is often just the little things that make such a big difference to the usefulness of your equipment Optical accessories, eyepieces for steep sights Thermometers, barometers, compasses From page 28 onwards From page 16 onwards 3

Tripods, tribrachs and laser plummets Set up instruments quickly, easily, precisely Leica Geosystems tripods: High stability for high-quality instruments Being extremely robust, and not susceptible

Aluminium tripods offer an excellent price-performance ratio even for simple applications. The bright yellow coating makes the tripods easy to see and protects them against wear and weather.

They permit the rapid, forcedcentred exchange of instruments, prisms or GPS antennae. The tribrachs can be supplied with or without optical plummet for simple and precise setting up.

4 Tripods, tribrachs and laser plummets Set up instruments quickly, easily, precisely Leica Geosystems tripods: High stability for high-quality instruments Being extremely robust, and not susceptible to distortion when exposed to sunlight, Leica Geosystems tripods are well suited to all applications. For wooden tripods, only top-quality hardwood is used, carefully seasoned. Aluminium tripods offer an excellent price-performance ratio even for simple applications. The bright yellow coating makes the tripods easy to see and protects them against wear and weather. Leica Geosystems tribrachs: Right for all accuracy requirements Top-quality tribrachs form part of the standard outfit for every Leica Geosystems survey instrument. They permit the rapid, forcedcentred exchange of instruments, prisms or GPS antennae. The tribrachs can be supplied with or without optical plummet for simple and precise setting up. The footscrews, which are maintenance-free and are protected against dust, ensure that the movement is always smooth and free of play. Leica Geosystems laser plummets The new, innovative laser plummets make an appreciable contribution to efficient fieldwork. They are the ideal supplement for levelling-up accessories used with total stations which already have a builtin plummet. There is no longer any need for inconvenient viewing through an optical plummet system. The instruments can be set up over the ground point much more quickly and conveniently, and their levelling-up inspected. 4

Wooden tripods Fit to all Leica Geosystems levels, theodolites, total stations and GPS antennae For all climates Conspicuous colour 296 632 GST20 Professional Series, heavy duty, telescopic, with

5 Wooden tripods Fit to all Leica Geosystems levels, theodolites, total stations and GPS antennae For all climates Conspicuous colour GST20 Professional Series, heavy duty, telescopic, with plumb bob GST20-9 Professional Series, heavy duty, telescopic GST120-9 Professional Series, heavy duty, telescopic, self-closing Robust, well-established wooden tripods for general use, with carrying strap Proven long life; use of selected alpine beech results in warp resistance and in good vibration characteristics Packaged length 107cm (3.5ft), fully extended leg length 180cm (5.9ft) Weight 6.4kg (14.1lb) GST111 Basic Series, heavy duty, telescopic GST111S Basic Series, heavy duty, telescopic, M35 central fixing screw Simple and robust wooden tripods for rough working conditions, with carrying strap Packaged length 102cm (3.3ft), fully extended leg length 166cm (5.4ft) Weight 5.7kg (12.6lb) GST05 Medium weight, telescopic, with accessories Handy tripod for use with medium-weight instruments Polymer coating for long life Packaged length 105cm (3.4ft), fully extended leg length 172cm (5.6ft) Weight 5.6kg (12.3lb) GST40 Heavy duty, rigid legs, with accessories For precision levelling Maximum stability provided by rigid legs, length 1.70m (5.6ft) Quick and reliable setting of the instrument at eye height Weight 6.0kg (13.2lb) 5

Aluminium tripods, telescopic Handy, durable, corrosion-resistant aluminium tripods 563 630 GST05L Medium weight, with accessories For simple applications, medium-weight instruments and GPS antennae

4ft), fully extended leg length 168cm (5.5ft) Weight 4.5kg (9.

6 Aluminium tripods, telescopic Handy, durable, corrosion-resistant aluminium tripods GST05L Medium weight, with accessories For simple applications, medium-weight instruments and GPS antennae Packaged length 105cm (3.4ft), fully extended leg length 172cm (5.6ft) Weight 4.6kg (10.1lb) GST112 Medium weight, with accessories For simple applications Packaged length 103cm (3.4ft), fully extended leg length 168cm (5.5ft) Weight 4.5kg (9.9lb) BST02L Lightweight, telescopic, with quick-action clips For use with lightweight instruments Quick-action clips for rapid setting-up and removal Packaged lengths 108cm (3.5ft), fully extended leg length 182cm (6.0ft) Weight 5.0kg (11.0lb) BST01L Simple version For use with builders levels Quick-action clips for rapid setting-up and removal Packaged length 105cm (3.4ft), fully extended leg length 178cm (5.8ft) Weight 4.0kg (8.8lb) Tripod star GST4 For reliable setting-up of the instrument even on smooth floors without it slipping Aluminium version, foldable Rubber rings to secure the tripod legs Weight 0.9kg (2lb) 6

7 Tribrachs Routinely supplied with bull s-eye bubble for rapid levelling-up GDF121 Tribrach, Professional Series, without optical plummet (as illustrated) GDF122 Tribrach, Professional Series, with optical plummet GDF21 Tribrach without optical plummet (light green) GDF22 Tribrach with optical plummet (light green) Well-established, robust, precise model for highest accuracy requirements Footscrews maintenance-free and protected against dust Optical plummet with 2 magnification for precise centring Focusing range from 0.5m (1.6ft) to infinity GDF111 Tribrach, Basic Series, without optical plummet (as illustrated) GDF111S Tribrach, Basic Series, without plummet, for M35 central fixing screw GDF112 Tribrach, Basic Series, with optical plummet GDF11 Tribrach without optical plummet (light green) GDF12 Tribrach with optical plummet (light green) GDF101 Tribrach without optical plummet (red) All-purpose tribrachs for medium accuracy requirements Very attractive price/performance ratio Optical plummet with 2 magnification for precise centring Focusing range from 0.5m (1.6ft) to infinity GDF23 Tribrach with large central opening For nadir plumbing with ZNL and NL plummets Same design as GDF21, but with larger central fixing screw (M42) GDF26 Shifting tribrach with optical plummet Proven robust and precise version of GDF21, for precise horizontal displacement without correcting the levelling-up again Laser plummets For convenient centring and inspection of tribrachs and sensors, using a spot on the floor or on the ceiling When the TC is transferred to the next tripod (for traversing and for forced-centred measuring), the centring can be inspected without difficulty Built-in tubular bubble for levelling-up and centring to 0.5mm Laser brightness adjustable Leica height hook usable with all outfits Replaces the optical plummet in the tribrach SNLL121 Sensor nadir laser plummet* (as illustrated) For use with reflectors or GPS antennae with carrier and locking pegs ZNLL121 Zenith and nadir laser plummet* Also for centring beneath ceiling points *Laser class 2 in accordance with IEC825-1 and EN Laser class II in accordance with FDA21 CFR Ch CAUTION LASER RADIATION DO NOT STARE INTO BEAM nm/0.95mW max. CLASS II LASER PRODUCT GVP100 Soft bag for laser plummet 7

Reflector equipment and reflector poles High precision even at long range Leica Geosystems prisms An essential for every total station The range

These are manufactured from high-quality optical glass which is worked to extremely strict specifications.

Leica Geosystems reflector carriers and reflector poles The Leica Geosystems reflector system offers many combinations and can be adapted by the

8 Reflector equipment and reflector poles High precision even at long range Leica Geosystems prisms An essential for every total station The range and accuracy of all total stations and attachable distancers can be fully exploited by using Leica Geosystems prisms and the reflector system. These are manufactured from high-quality optical glass which is worked to extremely strict specifications. All reflecting surfaces are provided with a resistant coating so that the reflectivity is not adversely affected by dirt or condensation. Leica Geosystems reflector carriers and reflector poles The Leica Geosystems reflector system offers many combinations and can be adapted by the user to individual requirements. The complete reflector system includes, in addition to prisms, the following: Prism holders, precision reflectors, reflector carriers, reflector poles and extension pieces. 8

9 Reflectors For all total stations and attachable EDMs Prism centre in the tilting axis and in the vertical axis (correct Hz- and V angle measurements even when prism is not aligned) Fit to all Leica Geosystems reflector carriers and reflector poles Coated circular prism for best reflection and range GPR121 Prism, Professional Series, with detachable target plate For exact TPS measurements, prism surface accuracy 2 Range 3000m with TPS1100 under average conditions Holder and housing of aluminium GPR111 Prism, Basic Series, with fixed target plate For routine work, particularly on the building site Attractive price / performance ratio Range 2000m with TPS300 under average conditions Holder and housing of red polymer, fibre-reinforced GVP609 Container for 2 GPR111/121, 2 laser plummets and 2 GDF GPR1 Circular prism in container GPH1 Single-prism holder Proven combination Holder and housing of fibre-reinforced polymer GZT4 Target plate for GPH GVP448 Draw-string bag for GPH1 Mini prisms For all close-range TPS applications Same tilting-axis height as GPH1 Prism constant +17.5mm GMP101 Mini prism set, Professional Series (as illustrated) GMP102 Mini prism, Professional Series GMP104 Mini prism with L bar For all close-range applications requiring high accuracies Stable aluminium construction ensures durability and high precision GMP101 with bubble, target spike and bag for additional applications options Range with TPS1100: 1500m (4920ft) under average conditions GMP111 Mini prism, Basic Series For all close-range applications involving total stations Flexible prism system with four screw-on aluminium rods permitting five different prism heights (10, 40, 70, 100, 130cm) Range with TPS300: 1500m (4920ft) under average conditions Holder and housing of red polymer, fibre-reinforced GPM111-0 Mini prism 0-const., Basic Series Same good quality as Basic Series Mini prism, with 0mm constant GVP608 Soft bag for GMP111, with carrying strap 360 reflector GRZ4 All-round distance measurement For mass point surveys, 3D profiles, solo operation, networking Permits measurements without alignment of the instrument Ideal addition when using RCS1100 or lock mode Rubber caps for optimum protection of prisms Range with TPS1100: 1500m (4920ft) under average conditions Precision reflector GPH1P Single-prism precision reflector GVP468 Container for 2 GPH1P For top-accuracy requirements Routinely supplied with precision sight for aligning the reflector accurately and confidently Robust metal housing provides high stability Prism precisely adjusted (additive constant = zero) 9

Reflector carrier 667 313 GRT144 Carrier for prisms and GPS antennae (as illustrated) 560 112 GRT44 Carrier for prisms and GPS antennae (light green) 667 217 GAD31 Screw-to-stub adapter for antenna

10 Reflector carrier GRT144 Carrier for prisms and GPS antennae (as illustrated) GRT44 Carrier for prisms and GPS antennae (light green) GAD31 Screw-to-stub adapter for antenna Fits into all Leica Geosystems tribrachs Budget-priced carrier for prisms and GPS antennae Sturdy light-metal construction Suitable for use with Leica Geosystems height hook GZR2 Carrier, with plate level, without optical plummet (as illustrated) GZR3 Carrier, with plate level, with optical plummet For highly-accurate measuring and precise centring over ground points (GZR3) Reflector carrier and target carrier with fixed height Built-in tubular bubble for precise levelling-up and inspection Three-dimensional system accuracy of GPH1P precision reflector, GZR3 reflector carrier and GDF21 tribrach is = 0.3mm GVP606 Container for 2 GZR/laser plummets, 2 GPH1 and 2 GDF Prism holders GPH3 Three-prism holder (illustrated with circular prisms) For measurements over long distances or under poor atmospheric conditions Inclinable prism holder with prism centre in the tilting axis and the vertical axis Also usable with only two prisms or with a circular prism GVP429 Container for GPH3, GRT, SNL and GDF GVP616 Multicontainer for SNL, GPH, GRT and GDF The new insert enables the packing of different accessories as required GVP450 Draw-string bag for GPH GSH101 Flexible prism holder (gooseneck) For measuring to inaccessible points Usable with all Leica Geosystems mini reflectors Attachable to all Leica Geosystems reflector poles Adapters for reflector carriers GAD101 Prism-constant adapter Adapter for Leica Geosystems mini prisms, for prism constant 0mm GAD102 Mini-prism adapter, Basic Series Adapter for Leica Geosystems mini prisms (Basic Series), GMP111 to all prism carriers and reflector poles; Leica Geosystems standard tilting-axis height as for GPH1 and GMP101, GMP102 Instrument height meter GHM007 Tape measure GHT196 Distance holder for the tape measure Ideal accessory for measuring the instrument or prism height with the height-corrected tape measure Easy to use, no calculations necessary 10

11 Reflector poles Routinely supplied with adjustable bull s-eye bubble for positioning vertically Comfortable to hold GLS11 Reflector pole, Professional Series, extends to 2.15m GZW12 Extension (1m) for reflector pole GLS11 Specially hardened spike ensures durability Telescopic extension with clamp, extension up to 2.15m (7.1ft) cm and ft graduations Light metal, weight 0.9kg (1.3lb) GLS111 Reflector pole, Basic Series, extends to 2.60m GLS116 Reflector pole, Basic Series, extends to 8.5ft GLS112 Reflector pole, Basic Series, extends to 3.60m GLS117 Reflector pole, Basic Series, extends to 12ft GLS113 Mini reflector pole, Basic Series, extends to 1.5m Interchangeable steel spike for rough conditions Telescopic extension with clamp, adjustable Conspicuous colour (standardized red/white divisions) GLS14 Mini reflector pole Small handy light-metal construction with bull s-eye bubble For higher accuracy with all applications Prism 20cm above point Dual struts GSR2 Dual strut, Professional Series For flexible and stable setting-up of the GLS11 reflector pole Can be clamped to any location on reflector stand Sturdy aluminium construction GSR111 Dual strut, Basic Series For flexible and stable setting-up of the Basic Series reflector poles Can be clamped to any location on reflector stand Sturdy aluminium construction Hidden-point pole GLS114 Hidden-point pole For easy measuring to hidden points Usable with all Leica Geosystems reflector poles Lightweight metal construction, weight 0.9kg (2lb) Supplied together with a Leica Geosystems mini prism Reflector tapes Retro targets S, 20mm 20mm, 20 pieces, 2 40m Retro targets M, 40mm 40mm, 20 pieces, m Retro targets L, 60mm 60mm, 20 pieces, m Close-range TPS measurements for deformation- and industrial measurements Crosshair and concentric circles promote optimum targeting Easily fitted to all objects (adhesive reverse side to tape) 11

The Leica Geosystems range includes plug-in batteries for total stations, theodolites and digital levels, and external batteries.

12 Batteries and chargers The lasting solution for your instruments Leica Geosystems batteries All batteries are of the rechargeable NiCd or metal-hydride types. They provide a reliable, long-life power supply. The Leica Geosystems range includes plug-in batteries for total stations, theodolites and digital levels, and external batteries. Leica Geosystems chargers Chargers recharge the batteries properly. They stabilize the charging current, even if the supply voltage fluctuates, and ensure that the batteries last for a long time. 12

13 Standard batteries GEB121 NiMH battery, Professional Series, 6V/3.6Ah New TPS Professional Series battery Compatible with camcorder standard batteries One charge is enough for up to five hours of work (depending on instrument and application) Weight 380g (0.9lb) GEB111 NiMH battery, Basic Series, 6V/1.8Ah New TPS Basic Series battery Compatible with camcorder standard batteries One charge lasts for up to four hours (depending on instrument and application) Weight 200g (0.4lb) Plug-in batteries Handy plug-in batteries, easily inserted into Leica Geosystems instruments GEB87 NiCd plug-in battery, large, 12V/1.1Ah GEB187 NiMH plug-in battery, large, 12V/1.8Ah GEB187 with new environment-friendly cell technology and increased capacity One charge lasts for up to four hours (depending on instrument and application) Weight 410g (0.9lb) GEB77 NiCd plug-in battery, small, 12V/0.6Ah One charge lasts for up to four hours (depending on instrument and application) Weight 210g (0.5lb) GEB79 NiCd plug-in battery for digital levels, 12V/0.6Ah One charge is enough for up to four hours of work (depending on instrument and application) Weight 210g (0.5lb) External batteries GEB71 NiCd external battery, large, 12V/7Ah For several days of work without recharging and for high current consumption Heavy-duty metal housing Weight 3.0kg (6.6lb) GEB70 NiCd external battery, small, 12V/2.2Ah The most widely-used external battery Hooks on to tripod leg Weight 1.0kg (2.2lb) 13

Chargers 667 727 GKL122 Charger, Professional Series, EU version (230V) 667 730 GKL122-1 Charger, Professional Series, US version (120V) 667 728 GKL122-3 Charger, Professional Series, UK version

14 Chargers GKL122 Charger, Professional Series, EU version (230V) GKL122-1 Charger, Professional Series, US version (120V) GKL122-3 Charger, Professional Series, UK version (230V) GKL122-4 Charger, Professional Series, AUS version (230V) Quick-charging or normal-charging options for four Leica Geosystems batteries (two GEB111/GEB121 and two GEB68/GEB70/GEB71/GEB77/GEB79/GEB83/GEB87/GEB187) Charging at 100V 240V AC, or at 12V 24V DC (from vehicle battery) Protection against overload Vehicle battery cable included in delivery Typical charging time for a GEB121: approx. 2 hours and 30 minutes GKL111 Charger, Basic Series, EU version (230V) GKL111-1 Charger, Basic Series, US version (120V) GKL111-2 Charger, Basic Series, JAP version (100V) GKL111-3 Charger, Basic Series, UK version (230V) GKL111-4 Charger, Basic Series, AUS version (230V) Simple, budget-priced charger for a Leica Geosystems standard battery (GEB111/GEB 121) Quick charging, with protection against overload Vehicle battery cable included in delivery Typical charging time for a GEB111: approx. 90 minutes GKL22 Leica Geosystems small charger, EU version (230V) GKL22-1 Leica Geosystems small charger, US version (120V) Normal charging of plug-in batteries and of the GEB70 external battery Simple, budget-priced charger Charger adapter GDI121 Standard battery adapter for GKL23 and GKL122 Supplement for GKL122, to charge four Leica Geosystems standard batteries Adapter for GKL23 to charge two Leica Geosystems standard batteries Battery cables GEV52 Cable connecting GEB70/71 and instrument GEV71 12V vehicle-battery cable, 4m 14

15 15

16 Recommendations ** for equipment (reflector side) Instrument Reflector Adapter Constant adapter Reflector pole Reflector carrier Tribrach Tripod TPS300 TC(R) 303 / 305 / 307 TC(R) 303S / 305S / 307S GPR GMP111* GAD GAD GLS111/112 m /ft GRT SNLL GDF GDF GDF111S GST GST05/05L / GST111S TPS700 TC(R) 702 / 703 / 705 TPS1100 TPS1000/2000 TC(R/A/M) 1101 / / 1105 T1800 / TC1800 / TCA1800 TC2003 / TCA2003 GPR GRZ GMP101/ / GAD GLS GRT SNLL GDF GDF GST20/ / GST * Included in standard delivery ** Other combinations are possible and can be assembled individually with advice from Leica Geosystems

17 Recommendations ** for equipment (instrument side) Instrument Battery Charger Memory card Tribrach Tripod TPS300 TPS100 T105 / T107 T105S / T107S TC(R) 303 / 305 / 307 TC(R) 303S / 305S / 307S GEB111* GEB111* GEB111* GEB111* GKL111* EU , US JP , UK AU GKL111* EU , US JP , UK AU GKL111* EU , US JP , UK AU GKL111* EU , US JP , UK AU GKL122 GDF111* GDF111S GDF111* GDF111S GDF GST GST05/05L / GST111S GST GST05/05L / GST111S GST GST05/05L / TPS700 TC(R) 702 / 703 / 705 GEB GEB GKL111* EU , US JP , UK AU GDF GST111 / GST / GST112/05L / TPS1100 TC(R/A/M) 1101 / / 1105 GEB GKL122 EU , US UK , AU MC 0.5MB/2MB / MCF 8MB GDF GST20/ / GST TPS1000/2000 T1800 / TC1800 / TCA1800 TC2003 / TCA2003 GEB GEB GEB GEB GKL122 + GDI121 EU , US UK , AU GKL122 + GDI121 EU , US UK , AU MC 0.5MB/2MB / MC 0.5MB/2MB / GDF GDF GST20/ / GST GST20/ / GST * Included in standard delivery ** Other combinations are possible and can be assembled individually with advice from Leica Geosystems

Data recording and radio modems Indispensable for highly efficient data management PCMCIA memory

and so they also serve as data carriers for Leica Geosystems total stations and GPS instruments.

Radio modems Today, the cable-free transmission of survey data is the norm and no longer the

18 Data recording and radio modems Indispensable for highly efficient data management PCMCIA memory cards Within only a short time, PCMCIA memory cards have become the standard in the PC environment, and so they also serve as data carriers for Leica Geosystems total stations and GPS instruments. They have a large storage capacity, and are small, lightweight, flexible and reliable. Radio modems Today, the cable-free transmission of survey data is the norm and no longer the exception. It saves on personnel, and has the supreme advantage that the data is communicated quickly and without errors. 16

PCMCIA memory cards The best possible security for your survey data Top-level protection against all environmental influences Operating temperature from 20 C to +75 C 667 745 MCF8MB-3 PCMCIA-ATA

19 PCMCIA memory cards The best possible security for your survey data Top-level protection against all environmental influences Operating temperature from 20 C to +75 C MCF8MB-3 PCMCIA-ATA memory card, 8Mbyte MCF16MB-3 PCMCIA-ATA memory card, 16Mbyte MCF85MB-3 PCMCIA-ATA memory card, 85Mbyte Memory card without battery, for TPS1100 Professional Series and for GPS System 500, CR333 (manufactured from May 1997 onwards) and CR344 Compatible with PCMCIA-ATA standard MC0.5MB2 PCMCIA-SRAM memory card, 512Kbyte MC2MB-2 PCMCIA-SRAM memory card, 2Mbyte Extremely fast SRAM cards with integrated accumulator Specially for applications with TPS PCMCIA memory-card reader for PCs MCR4 PCMCIA memory-card reader Universal instrument for all conventional operating systems Power supply via PC Supports all SRAM cards and also ATA flash- and ATA hard-disk cards Radio modems* TCPS26 Two radio modems in transport case** Latest radio modems with spread-spectrum technology High throughput rates for all applications with TPS Range up to 1000m Configurable frequency Permits work with more than two radio modems Accessory options for carrying the equipment on plumbing pole or on the body * Refer also to TPS1100 Professional Series brochure ** National transmitter-operating licence required Data-transfer cables GEV58 Y-cable, connecting instrument and controller to external battery GEV63 Cable 1.2m, connecting instrument to controller GEV102 Data transfer cable, Lemo 0 RS232 (9-pin) GEV130 Y-cable 5/2m, Lemo 0 / 9 pin, for DATA DISTO GSI/RS232 with external power supply (5m for data, 2m for DC power) GEV131 Y-cable 10/2m, Lemo 0 / 9 pin, for DATA DISTO RS232 with external power supply (10m for data, 2m for DC power) GEV104 Data cable, 2m long, 25-pole male plug, RS GEV94 Data cable, 2m long, 25-pole male and 25-pole female plug GEV147 Data cable, LEMO 0 / HR10 17

20 Plummets Precise nadir- and zenith alignment Optical plummets Optical zenith- and nadir plummets are practical precision instruments with forced centring in the tribrach. They are intended for all applications in which top precision is a must. 18

Optical zenith- and nadir plummets 406 853 ZNL Zenith and nadir plummet, in container 406 855 GSTP9 Reticle plate For precise

built-in tubular bubble Standard deviation 1mm at 30m (1 : 30 000) Precision optical plummets Automatic plummet with built-in

5mm at 100m (1 : 200 000) 344 299 NL Automatic nadir plummet, in container 364 664 GSTP6 Reticle plate For precise nadir alignment

21 Optical zenith- and nadir plummets ZNL Zenith and nadir plummet, in container GSTP9 Reticle plate For precise zenith- and nadir alignment in surveying, and in building construction and subsurface work Forced centring in the tribrach With built-in tubular bubble Standard deviation 1mm at 30m (1 : ) Precision optical plummets Automatic plummet with built-in compensator Standard deviation 0.5mm at 100m (1 : ) NL Automatic nadir plummet, in container GSTP6 Reticle plate For precise nadir alignment in surveying, in building and construction work, and in industry ZL Automatic zenith plummet, in container GSTP6 Reticle plate For precise zenith alignment in surveying, in building and construction work, in mining and in industry 19

Levels The whole range from one source LEICA BasicLevel

but still profiting from Leica Geo-systems quality.

LEICA NA700 The Most Robust Indispensable helper on

22 Levels The whole range from one source LEICA BasicLevel The Best Value Measuring for the best value-for-money but still profiting from Leica Geo-systems quality. Only with the LEICA BasicLevel. LEICA NA700 The Most Robust Indispensable helper on every building site. Extremely robust and highly accurate. LEICA NA2/NAK2 The Most Precise For the most exact height measurements in geodesy, construction and Industry. Simply the best in the world. 20

LEICA BasicLevel The best value Technical data 642 311 Accuracy per km double-run levelling < 3mm Telescope Image upright

measurement 100 Additive constant for distance measurement 0 Compensator Tilt range ± 10 Setting accuracy (standard

23 LEICA BasicLevel The best value Technical data Accuracy per km double-run levelling < 3mm Telescope Image upright Magnification 20 Field diameter at 100 m > 2,3m Shortest sighting distance < 1m Multiplication constant for distance measurement 100 Additive constant for distance measurement 0 Compensator Tilt range ± 10 Setting accuracy (standard deviation) < 1 Sensitivity of bull s-eye bubble 8 /2mm Horizontal circle Graduation 360 Interval 1 Temperature range Operation 20 C to +45 C 21

LEICA NA700 The most robust 22 Technical data NA720 NA724 NA728 NA730 641 982 641 983 641 984 641 985 Magnification 20 24 28 30 Telescope image upright upright upright upright Gas filled yes yes yes

5m 0.5m 0.7m Diameter of objective 360 /400gon 360 /400gon 360 /400gon 360 /400gon Angle measurement selectable selectable selectable selectable Distance measurement Multiplication factor 100 100 100

24 LEICA NA700 The most robust 22 Technical data NA720 NA724 NA728 NA Magnification Telescope image upright upright upright upright Gas filled yes yes yes yes Diameter of objective 30mm 36mm 40mm 40mm Shortest focusing distance 0.5m 0.5m 0.5m 0.7m Diameter of objective 360 /400gon 360 /400gon 360 /400gon 360 /400gon Angle measurement selectable selectable selectable selectable Distance measurement Multiplication factor Additive constant Circular bubble 10 / 2mm 10 / 2mm 10 / 2mm 10 / 2mm Focus drive rough rough rough/fine rough/fine Horizontal drive both sides, endless both sides, endless both sides, endless both sides, endless Accuracy Per km double-run 2.5mm 2mm 1.5mm 1.2mm Single measurem. with 30m target dist. 1.5mm 1.2mm 1mm 0.8mm Compensator Setting accuracy < 0.5 < 0.5 < 0.3 < 0.3 Working range ± 15 ± 15 ± 15 ± 15 Environmental Impact ISO ISO ISO ISO Water and dust resistance IP57 (immersion) IP57 (immersion) IP57 (immersion) IP57 (immersion) Temperature range Operation 20 C to +50 C 20 C to +50 C 20 C to +50 C 20 C to +50 C Storage 40 C to +70 C 40 C to +70 C 40 C to +70 C 40 C to +70 C Dimensions, Weight Instrument dimensions cm cm cm cm Instrument weight 1.6kg 1.6kg 1.7kg 1.7kg

LEICA NA2 NAK2 The most precise NAK2 with GPM3 Technical data NA2 NAK2 (360 ) NAK2 (400gon) 352 036 352 038 352 039 Telescope magnification Standard eyepiece 32 32 32 FOK73 eyepiece (optional) 40 40

25 LEICA NA2 NAK2 The most precise NAK2 with GPM3 Technical data NA2 NAK2 (360 ) NAK2 (400gon) Telescope magnification Standard eyepiece FOK73 eyepiece (optional) FOK117 eyepiece (optional) Clear objective aperture 45mm 45mm 45mm Field of view at 100m 2.2m 2.2m 2.2m Shortest focusing distance 1.6m 1.6m 1.6m Multiplication factor 100m 100m 100m Additive constant Accuracy Per 1km double-run levelling dep. on type of staff and on procedure up to 0.7mm up to 0.7mm up to 0.7mm With parallel-plate micrometer 0.3mm 0.3mm 0.3mm Compensator Setting accuracy (stand. dev.) Working range ~30 ~30 ~30 Sensitivity of circular level 8 / 2mm 8 / 2mm 8 / 2mm Horizontal circle Glas circle gon Graduation diameter 70mm 70mm Graduation interval 1 1gon Reading by estimation to 1 10mgon Temperature range Operation 20 C to +50 C 20 C to +50 C 20 C to +50 C Storage 40 C to +70 C 40 C to +70 C 40 C to +70 C Parallel-plate micrometer Range Interval Estimation optional accessory GPM3 10mm 0.1mm 0.01mm with glass scale GPM6 10mm 0.2mm 0.05mm with metal drum 23

Levelling staffs and their accessories Decisive for accurate surveying Levelling staffs Leica Geosystems levelling staffs are indispensable for accurate levelling.

The wood used to manufacture the folding staffs is carefully selected and well seasoned.

26 Levelling staffs and their accessories Decisive for accurate surveying Levelling staffs Leica Geosystems levelling staffs are indispensable for accurate levelling. They are characterized by highly-precise graduations, and by resistance to weather and to temperature changes. The wood used to manufacture the folding staffs is carefully selected and well seasoned. The wooden folding staffs are specially coated, and this makes them remarkably resistant to abrasion and to adverse environmental conditions. Invar staffs Invar is an excellent scale carrier, as a change in temperature does not influence its length. The invar strip, which bears the graduation, is spring-mounted in an aluminium frame and is therefore not affected by the expansion of the levelling staff. 24

27 Telescopic levelling staffs Sections of high-quality aluminium Simple mechanism for quick and accurate engagement of the individual telescopic sections Graduations and accuracy in accordance with DIN Telescopic levelling staffs with cm/mm graduation, for optical levels BTL4 4m BTL4D 4m, with bull s-eye bubble BTL5 5m BTL5D 5m, with bull s-eye bubble Front side with cm graduation, reverse side with mm graduation for internal dimensions Telescopic levelling staffs with bar code/mm graduation, for digital levels GTL4C 4m, with bull s-eye bubble Front side with bar code, reverse side with continuous mm graduation for levelling and height measurements Graduations and accuracy in accordance with DIN Dual-face levelling staffs with bar code/cm graduation, for digital and optical measurement All with handgrips and bull s-eye bubbles Front side with bar code, reverse side with cm graduation (GKNL4F with ft graduation) Graduations and accuracy in accordance with DIN GKNL4M 4.05m, polymer staff, 3 sections GKNL4F 13.3ft, polymer staff, 3 sections Each element 1.35m long, packed length 1.6m Fibreglass-reinforced polymer for high stability GNLE4C 4m, wooden staff, 4 sections The polymer coating encloses the wooden core. Staff folds to 1m GANL4C 4m, aluminium staff, 4 sections Lightweight staff, transport length 1m GSL2 Pair of struts for dual-face levelling staffs Invar staffs with bar code for digital levels GPCL3 3m GPCL3 3m, with calibration certificates (temperature and length) GPCL2 2m GPCL2 2m, with calibration certificates (temperature and length) with cm graduation for optical levels GPLE3N 3m GPLE3N 3m, with calibration certificates (temperature and length) GPLE2N 2m Invar ribbon is protected in recess in staff profile and is spring-tensioned Base plate is ground and is rust-free Calibration, precision and dimensions in accordance with DIN Weight of 2m staff: 3.5kg (7.7lb) Weight of 3m staff: 4.9kg (10.8lb) Attachable polymer centring ring Wooden case available for both lengths GSL3 Pair of struts for 3m invar staffs 25

28 Industrial staffs with bar code for digital levels GWCL cm GWCL92 92cm with cm-graduation for optical levels GWL182N 182cm GWL92N 92cm Extremely-light staffs with invar strip for indoor precision levelling (weights 1.7kg (3.7lb) and 3.0kg (6.6lb) respectively) Two interchangeable baseplates: curved and rectangular contact surfaces Graduations and accuracy in accordance with DIN Invar scales with bar code for digital levels GWCL60 60cm with cm-graduation for optical levels GWL30 30cm GWL60 60cm Strong invar strips, 25mm wide and 1.5mm thick Holes at both ends allow scales to be hung or fixed as required Suitable for inspection measurements on buildings and for special industrial measurements Graduations and accuracy in accordance with DIN Miscellaneous accessories GEB89 Staff illuminator GGB2 Spare bulb 12V/10W Attachable to any Leica Geosystems standard- or invar staff Adjustable height, staff section can be illuminated from above or below Range with optical level up to 60 metres, depending on visibility With digital level, field of view is fully illuminated at up to 40 metres 2Ah battery (GEB70) provides power for two hours of continuous use ON/OFF power-saver switch GLUS1 Baseplate Sturdy baseplate for a stable staff position Steel spikes for firm anchorage on all types of terrain Weight 3kg (6.6lb) GLI20N Staff level Lightweight metal staff level Bull s-eye bubble with centring accuracy 30 /2mm Easily secured to the levelling staff Weight only 0.1kg (0.2lb) GVP469 Transport case for two GPCL2/GPLE2N GVP470 Transport case for two GPCL3/GPLE3N 26

29 Levelling staffs Overview Bar-code graduation, digital levels cm graduation, automatic levels GWCL60 GWCL92 GWCL182 GPCL2 GPCL3 GTL4C GKNL4 GANL4C GNLE4C BTL4(D) BTL5(D) GPLE3N GPLE2N GWL182N GWL92N GWL60 GWL30 30cm 60cm 60cm 92cm 92cm 1,82m 1,82m 2m 2m 3m 3m 4m 4m 4m 4m 4m 5m Invar levelling staff Industrial staff Invar staff Wooden folding staff Sectional aluminium staff Sectional polymer staff Telescopic staff 27

enabling it to be matched to all requirements.

30 Miscellaneous survey accessories To create the best field outfit Optical accessories for Leica Geosystems total stations and theodolites Your instruments can be easily and inexpensively extended by adding modular optical accessories, enabling it to be matched to all requirements. Miscellaneous accessories Survey accessories such as thermometers, barometers, pen-pad holders and compasses are needed for all tasks. They therefore form part of the surveyor s standard equipment. 28

31 Interchangeable eyepieces FOK53* Telescope eyepiece as supplement, FOK53 Interchangeable telescope eyepiece, FOK73 Interchangeable telescope eyepiece, 40, for NA2/NAK FOK117 Telescope eyepiece as supplement, 20 Exchangeable against standard eyepieces Enables the telescope magnification to be matched High magnification for high-precision targeting Low magnification for targeting when there is strong heat shimmer *Modification in a Leica Geosystems workshop may be necessary Eyepiece filters, eyepiece prism GOF2 Eyepiece filter, green, for telescope and diagonal eyepiece Attachable to all standard and interchangeable eyepieces GOF4 Eyepiece filter, black, for telescope and diagonal eyepiece Special model for observing to bright targets At filter position with sun symbol, solar observation permitted for short periods Solar observation not permitted for total stations and theodolites with attachable EDM Eyepiece for steep sights GOK6 Eyepiece for steep sights, with variable sighting angle Pivoting eyepiece for perfect viewing angle For sights up to 72 (80gon) With counterweight for all TCs Diagonal eyepiece GFZ1 Diagonal eyepiece Allows steep sights up to the zenith For precise plumbing in building construction and subsurface work, and for astronomical observations With counterweight for all TCs Auxiliary lense GDV3 Double supplementary lens for measuring to reflector tapes (range below 20m), in container GVO7 Auxiliary lens, measuring range m, in case For close-range work at up to 0.88m (2.9ft) Easily attached to the telescope eyepiece Sunshades GSB5 Sunshade for digital level Easily attached to the telescope eyepiece Prevents entry of stray light 29

Miscellaneous field accessories 392 840 GDP3 Double-prism optical square 389 235 GLS5 Plumbing pole for double-prism optical square For all orthogonal staking-out and surveying Accuracy about 1cm at

32 Miscellaneous field accessories GDP3 Double-prism optical square GLS5 Plumbing pole for double-prism optical square For all orthogonal staking-out and surveying Accuracy about 1cm at 30m target distance GDZ2 Thermometer For measuring atmospheric temperature precisely In a protective tube GDZ10 Pocket barometer Thommen, type TX22 Measurement range m Accuracy 10m DP6 Compass Recta compass, type DP6 Used with RCS1000 to locate the prism quickly 30

Leica Geosystems world wide Whatever your surveying task, Leica

individual steps and bring substantial improvements in

Leica Geosystems is the only manufacturer able to offer you

new Professional Series and Basic Series product lines.

Leica Geosystems are highly-experienced pioneers in technology and

33 Leica Geosystems world wide Whatever your surveying task, Leica Geosystems has options and accessories which simplify the individual steps and bring substantial improvements in productivity. Leica Geosystems is the only manufacturer able to offer you inter-system compatibility, and this has now been extended to the new Professional Series and Basic Series product lines. This brings benefits for you, wherever you are in the world. Leica Geosystems are highly-experienced pioneers in technology and applications, and take pride in offering dynamic, reliable and flexible solutions which are in the interests of their customers. Profit from these solutions! 31

Leica Geosystems survey accessories More efficiency in all fieldwork Your dealer TQM ISO 9001 / ISO 14001 Total Quality Management Our commitment to total customer satisfaction Ask your local Leica

34 Leica Geosystems survey accessories More efficiency in all fieldwork Your dealer TQM ISO 9001 / ISO Total Quality Management Our commitment to total customer satisfaction Ask your local Leica Geosystems agent for more information about our TQM program. Illustrations, descriptions and technical data are not binding and may be changed without notice. Printed in Switzerland Copyright Leica Geosystems AG, Heerbrugg, Switzerland, en VIII.00 RDV Leica Geosystems AG CH-9435 Heerbrugg (Switzerland) Phone Fax

35 Australia: Belgium: Canada: China: Denmark: Germany: Finland: France: Netherlands: India: Ireland: Iceland: Italy: Japan: Leica Geosystems Pty Limited Tel: Fax: Van Hopplynus SA Tel: Fax: Leica Geosystems Ltd. Tel: Fax: Leica Geosystems Ltd. Tel: Fax: Leica Geosystems A/S Tel: Fax: Leica Geosystems GmbH, München Tel: Fax: Leica Nilomark OY Tel: Fax: Leica Geosystems S.a.r.l. Tel: Fax: Leica Geosystems B.V. Tel: Fax: Leica Geosystems, India Tel: Fax: Survey Instrument Services Ltd. Tel: Fax: R. Sigmundsson HF Tel: Fax: Leica Geosystems S.p.A. Tel: Fax: Leica Geosystems K.K. Tel: Fax:

36 Korea: Mexico: Norway: Austria: Portugal: Sweden: Switzerland: Singapore: Spain: UK: USA: Leica Geosystems Ltd. Tel: Fax: Leica Geosystems S.A. de C.V. Tel: Fax: Leica Geosystems AS Tel: Fax: Rudolf & August Rost Tel: Fax: Leica Geosystems, Ltda. Tel: Fax: Leica Geosystems AB Tel: Fax: Leica Geosystems AG Tel: Fax: Leica Geosystems Pte. Ltd. Tel: Fax: Leica Geosystems, s.l., Barcelona Tel: Fax: Leica Geosystems Ltd. Tel: Fax: Leica Geosystems Inc., Norcross Tel: Fax: Other countries: Leica Geosystems AG, Heerbrugg Tel: Fax: Situation in August 2000

Leica FlexLine Equipment List

Leica FlexLine Equipment List FlexLine Equipment List TS02 Instruments Total Stations for Prism Measurements 765268 TS02, 3"(1mgon) total station, laser plummet, 1 standard keyboard, user manual 765265