370Z Reversing Camera Installation Instructions
|
|
- Kristian Owens
- 5 years ago
- Views:
Transcription
1 370Z Reversing Camera Installation Instructions Concept how it works When Nissan first sold the 370Z with Premium Connect there was no option for a reversing camera. However, provision was made for one and the later models (the GT-Edition and MY13 cars in the UK) have a camera as standard. The Premium Connect system itself is 100% ready for a reversing camera but the car s loom is not. This loom provides the connectivity that Nissan missed out. Checking compatibility with your car If you have a Nissan 370Z with Premium Connect then your car is compatible with this modification. You will need to enable the camera option for it to work - refer to Configuring the Premium Connect System for details. What you need shopping list The loom The loom and camera can be purchased from nissansportz.com <click on this link for details> The camera If your loom was not supplied with a camera, then there is no need to buy an expensive one from your Nissan dealer. Any camera that meets these criteria will be suitable: Video format Video connection CMOS or CCD? Image Orientation NTSC (i.e. not PAL) Composite/CVBS with an RCA/Phono plug Either but CMOS gives a better image in low-light conditions Video image must be reversed (flipped)
2 Guide lines? Power Ideally none as these will be superimposed by the Premium Connect system. However, if your camera does have guide lines then you can disable the Premium Connect ones 12V DC There are many options available from various sources including ebay. It is possible to purchase one that fits in place of the rear number plate light. In this picture the camera is on the left and the Nissan number plate light is on the right: This type of camera means there is no need to cut any holes in your car making the installation easier and quicker. Also, it leaves no sign if you choose to uninstall the camera to return the car to standard and looks OEM when it is fitted. However, you might choose to install a camera with an adjustable bracket, or one flush into the rear bumper. Fitting instructions Tools required Philips head (cross head) screwdriver for the dashboard Small flat screwdriver for the camera power connection Trim removal tools, or a flat head screwdriver to remove the boot trim Insulating tape (optional) to insulate the video connector Cable ties and snips (optional) to tidy the wiring from the boot to the dashboard Towel or cloth (optional) to protect the centre console Configuring the Premium Connect System Press the start button so your car is in the On mode (there is no need to start the engine). With Radio off: Press and hold the Settings button and turn the volume control counter clockwise. After about 40 clicks a menu will appear
3 Select confirmation/adjustment Next move down to Camera and select Then select Camera Syst Type and change from No Camera to With Rear view Camera
4 Come all the way out of the menus using the back button and the system will reboot Now when you put the car in reverse, if a blue screen appears with Ensure it is safe before manoeuvring message your car is compatible
5 Installing the new loom Keep the ignition turned off. There is no need to disconnect the battery when installing this wiring. If you want to disconnect the battery then before you do so, move the seats forward and remove the 2 screws in the centre console (see Threading the cables through the car ) and drop the windows a little so they do not fowl the car roof when you open and shut the doors. To fit the loom you will need access to the connector behind the Sat Nav screen. This is relatively easy to access by removing a series of screws. Gaining access to the Sat Nav screen Pull up the gear level surround. This just unclips. If you have a manual car then you can grasp the surround through the gater. If you have an automatic you will need to lever the surround up be careful not to scratch the plastics. Lift the surround:
6 Unclip it: Optional but recommended - Place your towel or cloth beneath the gear lever surround to prevent the metal clips from scratching the centre console. Next, remove the knee pads by removing the 2 screws on each and unclipping them from the centre console.
7 Now remove the 2 screws that hold the lower section of the console:
8 With these gone you can pull the bottom of the console toward you to unclip it from the dash board. There is no need to remove the connections to the start button or lock light just be aware not to pull the console too far. The centre console will still be attached to the top of the dash board above the Sat Nav screen by 3 clips. Gently lift and pull the console to unclip it. You can now move the console away from the dash. There is no need to completely remove the console unless you want to. Notice the Sat Nav screen is mounted on a bracket and it is held in place by 2 screws at the bottom and 2 slots at the top.
9 Remove the 2 screws at the bottom of the screen and slide the screen out.
10 There are 2 connectors in the back of the screen. The smaller of the two can be left in place and the larger needs to be unplugged. The new loom will be installed between that connector and the screen. You have the choice to pull the loom up through the back of the dashboard or pull the power and video leads down. The second option is probably easiest. Fish the cables through the dash board using a length of stiff cable, etc. Be sure not to run the cable in front of the vent next to the screen. Ensure cables are tucked behind the upright plastic next to the vent. Now that you have the loom connected behind the Nav screen you should have the power lead and video cable hanging down in the passenger footwell. Fit the centre console back in place before you continue. Installing the Camera The camera will replace one of the number plate lights and the power & video cables need to be run up to the front of the car to connect to the loom. Open the boot and remove the cargo net, floor, etc. leaving it completely empty. The minimum plastic you need to remove is the section along the back edge of the car. Peel off the rubber seal that runs along the top of the plastic section. The plastic can then be unclipped as shown in the picture below:
11 Unclip the old number plate light and twist the bulb connector to remove the light from it. You will notice there is a rubber grommet which feeds the number plate lights. Either force a screwdriver through the grommet or cut a slice into it so you can pass the cables from the new camera into the boot space. Once the cables have been threaded through, refit the bulb into the camera and clip it in place.
12 Also, refit the grommet. You should now have the cables ready in the boot. Remove the foam spacer from the front of the boot to expose the metal boot floor and access to the cabin. You may wish to remove the plastic along one side of the boot to make it is easier lift the spacer. Doing so also means you can hide the cables better but this is optional:
13
14 Threading the cables through the car Remove the 2 screws at the front of the tunnel plastics: There is also one screw holding the centre console in place down each side of the tunnel. You may need to move the seats forward to gain access to the screws so do this before you disconnect the battery (if you choose to).
15 The console will now be free to lift up a little (still attached by the heated seat switches and hand brake). This is a picture looking under the centre tunnel plastics (from the boot looking forward towards the hand brake): Connect the long video cable (supplied with the camera) to the loom and wrap with insulation tape if desired. Thread both the video and power cables from the dash and along beneath the centre console. Fish the cables into the boot and tidy them behind the side plastic (optional) then connect each of them to the camera. At this point you can test the installation by pressing the start button into the On position (there is no need to start the car) and selecting reverse. You should see the rear camera view on the screen. If not, see the troubleshooting section at the end of these instructions. Happy that the loom and camera are working, tidy the cables in the boot and dash board. Test the camera once again before you refit all the plastics.
16 Refit the plastics, centre console and dash board being careful not to pinch and cables as you do so. Test the camera once more before you tidy up. Adjusting the guide lines Now the camera is in and working you have the option to adjust the position of the guide lines (or turn them off if your camera already has them). This is done via the menu option you used to enable the camera. Change the values in the Predi. Course Lines menu option to suit your set up. This is how some people have them set: 1. Turn the Radio Off 2. Press and hold the "Settings" button. 3. Without releasing the "Settings" button turn the volume control counter clockwise until the Diagnostic menu appears. 4. Once the Diagnostic menu appears, you can release the "Settings" button. 5. Select "Confirmation/Adjustment" from the menu. 6. Select "Camera" from the menu. 7. Select "Alter/Confirm Configuration" from the menu. Rear Coeff. K: Rear Coeff. F: Rear Coeff. P1: Rear Coeff. P2: Rear Coeff. C1: Rear Coeff. C2: Rear Coeff. D1: Rear Coeff. D2: Car Width: Rear Offset: Rear Height: Rear L/R Angle: Rear Up/Dn Angle: Rear Roll Angle Bumper Rear Dist.: Bumper Rear Ax Dist.: Steer. Max Angle: Min. Turning Red.: Wheelbase: Total Length: Steering Gear Ratio: Troubleshooting Cannot access secret menu on head unit Be sure to rotate the dial anti-clockwise with the stereo turned off. This menu option is only available to Premium Connect models. If your Nav is not a touchscreen then this loom will not work on your car. Nothing changes on the screen when reverse is selected This means the reverse camera has not been enabled. See Configuring the Premium Connect System for details.
17 A blue screen is shown when in reverse This happens when the Nav either is not receiving a signal or it cannot interpret it. Check the power and video leads to the camera. If your camera is PAL rather than NTSC this may also occur.
Courtesy of:discountcarstereo.com IP-JAG98
Courtesy of:discountcarstereo.com IP-JAG98 Quick Installation Guide for Jaguar x308 & x100 with CD Changer Select 1997-06 Standard and Premium Systems Created May 3, 016 Revised: December 10, 018 Introduction:
More informationCanon Powershot SD550 Zoom Lens Assembly Replacement
Canon Powershot SD550 Zoom Lens Assembly Replacement This repair guide will show you how to take apart the PowerShot SD550 and replace the zoom lens. Written By: Matthew Theiss ifixit CC BY-NC-SA www.ifixit.com
More informationPRECAUTIONS: Please read before you start the installation
Installation manual for DVI HA HDD with HA HDD harness In the box: DVI HA HDD video interface HA HDD plug and play wiring harness Installation manual IMPORTANT: Please read all precautions first. This
More informationGateway Profile 4 service guide
Gateway Profile 4 service guide Customizing Troubleshooting Contents Replacing Components in Your Gateway Profile 4.................. 1 About this guide.....................................................
More informationJippo Play - Installation Manual Page 1 INSTALLATION MANUAL. Intro Camera Operation Installation - Wrangler JK... 2
Jippo Play - Installation Manual Page 1 INSTALLATION MANUAL CONTENTS Intro... 1 Camera Operation... 2 Installation - Wrangler JK... 2 Jippo Play Configuration... 6 VES Installation... 7 Camera Installation...
More informationHavis Integrated Control System Installation Instructions for Standard* Ford Police Interceptor Utility
Installation Instructions for Standard* Ford Police Interceptor Utility Does not properly fit instrument panel in an Interceptor Utility with Interior Upgrade Code 65U Upgrade Package Includes: Cloth Seats
More informationSIR-PCM3 955/997 SIRIUS Satellite Radio interface for Porsche PCM 3 radios NTV-KIT266/285
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 SIR-PCM3 955/997 SIRIUS Satellite Radio interface for Porsche PCM 3 radios NTV-KIT266/285 BHM Overview The SIR-PCM3 adds Sirius
More informationGM NBS Truck CCD Backup Camera Kit Installation Guide
CS GM1 GM NBS Truck 2007 2012 CCD Backup Camera Kit Installation Guide Thank you for your purchase! These instructions are intended for the do it yourselfer who decides to install the camera without professional
More informationimac Intel 27" EMC 2639 Hard Drive
imac Intel 27" EMC 2639 Hard Drive Replacement Replace the Hard Drive in your imac Intel 27" EMC 2639. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 INTRODUCTION Replacing the
More informationINSTALLATION INSTRUCTIONS
2015 F-150 8 MyTouch factory display 360º Vision System (Kit # AVMS-3618) DUE TO THE COMPLEXITY OF THIS KIT PROFESSIONAL INSTALLATION IS REQUIRED CALIBRATION KIT IS REQUIRED FOR FINAL PROGRAMMING -Must
More informationInstallation Guide for DV8 Off-Road Tailgate-Mounted Tire Carrier (18-19 Jeep Wrangler JL)
Installation Guide for DV8 Off-Road Tailgate-Mounted Tire Carrier (18-19 Jeep Wrangler JL) Installation Time: 1 Hour Tools Required Trim removal tool (plastic or wood to prevent scratches on the paint)
More informationAcer Iconia Tab A3-A10 Touchscreen
Acer Iconia Tab A3-A10 Touchscreen Replacement You broke the digitizer but the display is still intact? Just simply replace the broken touchscreen!! Written By: Cecil His Mahier ifixit CC BY-NC-SA www.ifixit.com
More informationMacBook Pro 15" Core 2 Duo Models A1226 and A1260 SSD Installation
MacBook Pro 15" Core 2 Duo Models A1226 and A1260 SSD Installation Written By: Dozuki System 2017 guides.crucial.com Page 1 of 10 INTRODUCTION You can install hard drives up to 9.5mm thick. Some drive
More informationMegatouch FORCE Monitor Chassis Board Replacement
Megatouch FORCE Monitor Chassis Board Replacement Visit the Merit Industries, Inc. Web site http://www.meritind.com merit industries, inc. PM0337-01 Rev C Table of Contents FORCE Classic Monitor Chassis
More informationMacBook Pro 15" Core 2 Duo Models A1226 and A1260 SSD Dual Drive Installation
MacBook Pro 15" Core 2 Duo Models A1226 and A1260 SSD Dual Drive Installation Use this guide to install a second hard drive in place of the optical drive. Written By: Dozuki System 2017 guides.crucial.com
More informationModel: CAM430MV Wired Multi-View Camera with License Plate / Rear Surface Mount Installation Manual Features
Model: CAM430MV Wired Multi-View Camera with License Plate / Rear Surface Mount Installation Manual Features Fully Adjustable, Multiple Viewing Angle Smart Camera. High Resolution, 1/2 CMOS Color Camera
More informationPRODUCT USER MANUAL 12V. 5 Mirror + REVERSE camera IP67 PAGE 1 GX53HDM ABC-123. Mount INSTRUCTION MANUAL. Guide Lines
PRODUCT USER MANUAL 5 Mirror + REVERSE camera 5 12V 120 IP67 ABC-123 Screen Size Clip-On Mount Voltage Wired Wide Angle PAGE 1 Parking IP67 Rating Number Plate Guide Lines Mount INTRODUCTION WELCOME Thank
More informationLANCER / LANCER EVOLUTION (2008 ) REAR VIEW CAMERA MZ380462EX INSTALLATION AND HANDLING INSTRUCTIONS
LANCER / LANCER EVOLUTION (2008 ) REAR VIEW CAMERA MZ380462EX INSTALLATION AND HANDLING INSTRUCTIONS Navigation (MMCS) unit Camera Thank you for purchasing the Mitsubishi Genuine Accessory. To install
More informationTo connect the AC adapter:
Replacing the AC Adapter Replacing the AC Adapter 3 Plug the power cord into a wall outlet. The power indicator turns on. To connect the AC adapter: Connect the power cord to the AC adapter. Power indicator
More informationPlease read thoroughly before starting installation and check that kit contents are complete.
Chrysler/Dodge/Jeep Remote Add-On CD player for RA1, RA2, RA3, or RA4 radios (Kit # 5000-8750) 2013-current RAM truck and Viper; 2015-current Charger, Challenger, and 300; 2017 Pacifica Please read thoroughly
More informationXbox One Hard Drive Replacement
Xbox One Hard Drive Replacement Use this guide to replace the hard drive in an Xbox One. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 17 INTRODUCTION Follow this guide
More informationWritten By: Walter Galan
Replace a cracked screen on your iphone 4S. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 32 INTRODUCTION Use this guide to replace the screen on your iphone 4S. After successfully
More informationKP1S Installation Guide with INT1S Power Adaptor
KP1S Installation Guide with INT1S Power Adaptor 1. KP1S Windshield Mounting Apply provided 3M VHB adhesive pad to the mounting bracket and press firmly to adhere. Clean the windshield with alcohol and
More informationWritten By: Walter Galan
imac Intel 17" Power Supply Replacement Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION Power hungry? Keep those electrons flowing by replacing your power supply. TOOLS:
More informationPowerBook G4 Titanium DVI Display Replacement
PowerBook G4 Titanium DVI Display Replacement Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 INTRODUCTION Change out the entire display assembly, including the hinges and casing. This
More informationChapter 1 Getting Started
Chapter 1 Getting Started Installation Instructions 1.1 Subject The NEO AUX adapter an integration between an MP3 player and a factory installed car stereo. Equipped with the specific vehicle harness and
More informationimac Intel 27" Retina 5K Display SATA Cable
imac Intel 27" Retina 5K Display SATA Cable Replacement Written By: Dozuki System 2017 guides.crucial.com Page 1 of 32 INTRODUCTION Use this guide to replace the SATA cable on the back of the logic board
More informationPanasonic DMP-BD60/BD80
Panasonic DMP-BD60/BD80 Region switching guide With the mod. chip fitted the player will automatically play DVD's from all regions (1-6), but for Blu-ray disc playback the region must be manually selected.
More informationPRODUCT USER MANUAL. Rear view Monitor Reversing Camera IP67 G427. Adhesive Mount Guides1. Screen Size. IP67 Rating Mount
PRODUCT USER ANUAL Rear view onitor Reversing Camera 120 4.3 Screen Size + ABC-123 Wired Adhesive ount Parking Guides1 PAGE Wide Angle IP67 IP67 Rating Number Plate ount INSTRUCTION ANUAL INTRODUCTION
More informationParts Identification Page 1 Vehicle Preparation Page 3 Programming Switch Settings Page 3 Installation Page 4. Form #5420,
SoftTouch Navigation System 250-7613 2012-2013 Toyota Camry Installation Instructions General Applicability: Toyota 2012-2013 Prius/Prius V, 2013 Venza, 2013 Avalon, 2013 Highlander, 2013 Tacoma For video
More informationibook G4 12" 800 MHz-1.2 GHz RJ-11 Board
ibook G4 12" 800 MHz-1.2 GHz RJ-11 Board Replacement Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 24 INTRODUCTION The standard telephone jack port for connecting to the 56k internal modem.
More informationLED Lighting Kit For Elara NanoEdge Fixed Frame. Installation Guide. Attention: Read this guide before assembling your screen.
LED Lighting Kit For Elara NanoEdge Fixed Frame Installation Guide Attention: Read this guide before assembling your screen. INTRODUCTION GETTING STARTED WARNING - Sharp Edges This product may contain
More informationNikon D610 Flash Capacitor Replacement
Nikon D610 Flash Capacitor Replacement This guide will help to show you how to replace the D610's Flash Capacitor. Written By: Daniel Eagan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 10 INTRODUCTION In
More informationSV-6400 ClipCam SAFETY PRECAUTIONS
SV-6400 ClipCam SAFETY PRECAUTIONS Make sure to read the Installation Manual for safety precautions before installing unit or accessories. Please make sure the vehicle is well parked in a safe place. Make
More informationInstallation Instructions
Installation Instructions Page 1 of 18 November 2007 Communication, Hands-Free Version 6.0 Accessory Development These Installation Instructions supersede all previous versions. SUBJECT PHONE DOCKING CRADLE
More informationAssembly Instructions
Assembly Instructions Flat Screen Garage End User & IT Computer Cable Management May 2013 nylon zip-tie #2 (for computer wires) rear-access beam door (open) Figure 1 nylon zip-tie #1 (for #1 motor control
More informationimac Intel 27" Retina 5K Display CPU Replacement
imac Intel 27" Retina 5K Display CPU Replacement Replace or upgrade the CPU in your imac Intel 27" Retina 5K Display. Written By: Sam Lionheart ifixit CC BY-NC-SA www.ifixit.com Page 1 of 36 INTRODUCTION
More informationARC-CDJPLAYER INSTALLATION MANUAL Full plug and play kit, universal fit for use in Chrysler vehicles with RA1, RA2, RA3, or RA4 radios.
Required for Install: ARC-CDJPLAYER INSTALLATION MANUAL Full plug and play kit, universal fit for use in Chrysler vehicles with RA1, RA2, RA3, or RA4 radios. 1. Chrysler/Dodge/Jeep vehicle with Uconnect
More informationMacBook Core Duo Heat Sink Replacement
MacBook Core Duo Heat Sink Replacement MacBook Core Duo processor heat sink replacement. Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION The heat sink helps keep the processor
More informationInstallation Instruction VCPRGBGM05 - rev1.5 RGB Interface Harness modification Navigation Radio
Introduction The following instruction procedure is for the RGB interface to a GM 05 Nav Radio as part of the Webasto Product NAVCam Back-up Camera (VCP-0000220). In addition, an installer will need to
More informationimac Intel 27" EMC 2546 SSD Replacement
imac Intel 27" EMC 2546 SSD Replacement Remove your imac's SSD, or the SSD portion of your imac's Fusion Drive. Written By: Dozuki System 2017 guides.crucial.com Page 1 of 33 INTRODUCTION If your imac
More informationWritten By: senordingdong
Installation of the UniMac V4 adapter into the Apple imac Intel 17". This enables the usage of non OEM LCD panels, and offers an otherwise unavailable Full HD upgrade. This used for repair of the common
More informationAUX-JAG/R* Quick Start Guide CD Changer. Courtesy of:discountcarstereo.com. Created May 3, 2016 Revised: January 5, 2018
Courtesy of:discountcarstereo.com AUX-JAG/R* Quick Start Guide for Jaguar x308 & x100 with CD Changer Created May 3, 016 Revised: January 5, 018 *AUX-JAGR connects to the Changer/Amplifier in boot/trunk
More informationimac Intel 21.5" Retina 4K Display (2017) RAM
imac Intel 21.5" Retina 4K Display (2017) RAM Replacement Learn how to replace or upgrade the RAM in your 2017 Retina 4K imac. Written By: Evan Noronha ifixit CC BY-NC-SA www.ifixit.com Page 1 of 38 INTRODUCTION
More informationHP Photosmart c3180 Main Circuit Board Replacement
HP Photosmart c3180 Main Circuit Board Replacement Replacing a faulty main circuit board. Written By: Jim ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 TOOLS: Spudger (1) T10 Torx Screwdriver (1) ifixit
More informationPanasonic DMP-BD35/BD55
Panasonic DMP-BD35/BD55 Region switching guide With the mod. chip fitted the player will automatically play DVD's from all regions (1-6), but for Blu-ray disc playback the region must be manually selected.
More informationOLPC XO-4 Touch Touchpad Controller Replacement
OLPC XO-4 Touch Touchpad Controller Replacement This guide will walk through replacing a touchpad. Written By: Theodore Tsanakas ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION Use this guide
More informationThis tutorial was written by Team Xecuter. If you use anything from this tutorial please give credits and also a direct link to this page. Also if we have made any mistakes or left anything out please
More informationNTG3-SL NTV-KIT142. Overview Mercedes-SL. Backup camera / AV input / RSE / Video In Motion interface. Kit Contents. NTG3 Module NTV-ASY171
NTG3 5.04.14 NAV-TV 3950 NW 120 Ave, Coral Srings, FL NTV-KIT142 Overview 2009-2011 Mercedes-SL Backup camera / AV input / RSE / Video In Motion interface Kit Contents SMB to RCA NTV-CAB007 Plug & Play
More informationSony NEX-7 Screen Replacement
Sony NEX-7 Screen Replacement If your camera's screen is broken or non functioning, this guide will show you how you can replace the screen. Written By: Jay Miley ifixit CC BY-NC-SA www.ifixit.com Page
More informationThanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443
Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationOLPC XO-4 Touch Mouse Buttons Controller Replacement
OLPC XO-4 Touch Mouse Buttons Controller Replacement This guide will show you how to replace the mouse buttons controller. Written By: Michael Kellerman ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION
More informationXbox One Heat Sink Replacement
Xbox One Heat Sink Replacement Use this guide to replace the heat sink in your Xbox One. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 23 INTRODUCTION Need to upgrade
More informationibook G4 14" 933 MHz-1.33 GHz Hard Drive
ibook G4 14" 933 MHz-1.33 GHz Hard Drive Replacement Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 25 INTRODUCTION You can install hard drives up to 9.5mm thick. TOOLS: Coin (1) Phillips
More informationPeel/Rewind Upgrade Kit
Peel/Rewind Upgrade Kit Installation Instructions This kit includes the parts and documentation necessary to install the Peel/Rewind upgrade kit on the following printers: ZM400 ZM600 Read these instructions
More informationipad Mini Wi-Fi Front Facing Camera Replacement
ipad Mini Wi-Fi Front Facing Camera Replacement Replace the Front Facing Camera in your ipad Mini Wi-Fi. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 42 INTRODUCTION
More informationCanon PowerShot SX530 HS Shutter Release Cover Replacement
Canon PowerShot SX530 HS Shutter Release Cover Replacement Replacement instructions to the plastic cover holding the shutter release button, the button typically used to take pictures. Written By: Aaron
More informationCourtesy of:discountcarstereo.com USB-JAG. Quick install Guide for Jaguar X100 and X308 with Changer
Courtesy of:discountcarstereo.com USB-JAG Quick install Guide for Jaguar X100 and X308 with Changer Created: September 10, 2016 Revised: May 31, 2018 Introduction: Just because you drive an older car does
More informationMac Mini Mid 2011 SSD Dual Drive Installation
Mac Mini Mid 2011 SSD Dual Drive Installation Install a second hard drive in your mid 2011 Mac Mini. Written By: Dozuki System 2017 guides.crucial.com Page 1 of 19 INTRODUCTION Use this guide to install
More informationKRONOS INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS TABLE OF CONTENTS ENCLOSURE AND DONGLE ASSEMBLY 1 LIGHTED ENCLOSURES 2-10 2 SLIM ENCLOSURE 11-17 3 WIRED-ETHERNET DONGLE 18-25 4 REAR-OFFSET MOUNT 26-33 5 SIDE-MOUNT 34-41 6 SURFACE
More informationRECOMMENDED TOOLS PERSONAL & VEHICLE PROTECTION MASKING TAPE
GUIDE PART NUMBER: 250-7616 GM SOFT TOUCH NAVIGATION SYSTEM GENERAL APPLICABILITY 2013- RAV4 KIT CONTENTS ITEM QTY DESCRIPTION 1 1 NAVIGATION INTERFACE MODULE 2 1 VEHICLE INTERFACE T-HARNESS 3 1 LCD/GPS
More informationimac Intel 21.5" EMC 2389 Stand Replacement
imac Intel 21.5" EMC 2389 Stand Replacement Replace a broken or cosmetically unappealing stand on the imac 2389 21.5 Written By: Aaron Cooke ifixit CC BY-NC-SA www.ifixit.com Page 1 of 30 INTRODUCTION
More informationOlympus Stylus 1030 SW Camera Lens Replacement
Olympus Stylus 1030 SW Camera Lens Replacement Written By: Shanmei Zheng ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 TOOLS: Phillips #00 Screwdriver (1) ifixit Opening Tools (1) Spudger (1) T6 Torx
More informationPower Supply Replacement Instructions
Power Supply Replacement Instructions Visit the Merit Entertainment Web site http://www.meritgames.com PM0684-02 COPYRIGHT 2008 MERIT ENTERTAINMENT Force Power Supply Replacement CONTENTS: QTY PART NUMBER
More informationGENUINE PARTS. ipod INSTALLATION INSTRUCTIONS
GENUINE PARTS. DESCRIPTION: ipod Interface 2. PART NUMBERS: ipod INSTALLATION INSTRUCTIONS ipod Gateway Module Kit N-Bus harness for ipod Gateway N-Bus harness for SAT (with factory SAT only) 999U7-ST000
More informationGMNAV1 Advent Integrated Navigation
GMNAV1 Advent Integrated Navigation This interface is designed to integrate Navigation into select Buick and Chevrolet Systems. INSTALLATION MANUAL What s in the Box The following items are supplied with
More informationOnePlus 5 Screen and Digitizer Assembly Replacement
OnePlus 5 Screen and Digitizer Assembly Replacement Follow this guide to replace the screen and digitizer for the OnePlus 5. This replaces the screen as well as the frame it is attached to. Written By:
More informationCanon EOS 70D Camera Motherboard
Canon EOS 70D Camera Motherboard Replacement This guide will show you how to replace the main motherboard on a EOS 70D. Written By: Tyler Baker ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION
More informationHP Flyer Red Hard Disc Drive Replacement
HP Flyer Red Hard Disc Drive Replacement This guide will show you how to remove your hard drive. Written By: Anthony Ciotti ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION This guide is helpful
More informationWritten By: Ben Eisenman
iphone 3GS Rear Panel Replacement Replace a broken rear case on your iphone 3GS. Written By: Ben Eisenman ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION The plastic rear half of the iphone.
More informationMacBook Pro 13" Unibody Mid 2010 SSD Dual Drive Installation
MacBook Pro 13" Unibody Mid 2010 SSD Dual Drive Installation Use this guide to install a second SSD in place of the optical drive. Written By: Dozuki System 2017 guides.crucial.com Page 1 of 13 INTRODUCTION
More informationimac Intel 27" EMC 2546 Adhesive Strips
imac Intel 27" EMC 2546 Adhesive Strips Replacement Reattach your display with a set of adhesive foam strips. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION
More informationiphone 3G Headphone Jack Replacement Replace a broken audio port in an iphone 3G. Written By: irobot ifixit CC BY-NC-SA
iphone 3G Headphone Jack Replacement Replace a broken audio port in an iphone 3G. Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION No audio? Replace the headphone jack! TOOLS:
More informationINSTALLATION INSTRUCTIONS:
INSTALLATION INSTRUCTIONS: Part # SV-5600 PC-F Full Frame Type (Black or Chrome) Part # SV-5500 PC-B Top Bar Type (Black or Chrome) Part # SV- PK Kits with PlateCam and 3.5 LCD monitor FEATURES: Revolutionary
More informationfor the BIMMERTECH Multi Media Interface with HDMI inputs and additional video sources like front/rear cameras and SmartView mirroring devices
Installation Instructions for the BIMMERTECH Multi Media Interface with HDMI inputs and additional video sources like front/rear cameras and SmartView mirroring devices BMW F30/F80 Phone: +1(646) 439-7920
More informationFIELD REPLACEABLE UNIT DOCUMENTATION. Satellite TM. A20 Series GENERAL INFORMATION. Tools Required for Proper Disassembly and Reassembly:
GENERAL INFORMATION Tools Required for Proper Disassembly and Reassembly: 1. Phillips Screwdriver (Size 0&1) 2. 4mm Flat head Screwdriver 3. Case Separator 4. ESD Wrist Strap 5. ESD mats 6. Tweezers Before
More informationSony Vaio VPCCW21FX System Board Removal
Sony Vaio VPCCWFX System Board Removal General motherhood : Standard rules apply regarding static electricity discharge Keep track of screws that are removed by labeling each group and writing on the internal
More informationIndex. Front Facing Night vision Rear facing Parking lines For full specification please visit Brake light cameras
Index Page 3: Page 4: Page 5: Page 6: Page 7: Page 9: Page 11: Page 13: Page 17: Page 18: Page 19: Page 20: Page 21: Page 23: PSC10 PSC09 PSC13 PSC12 PSC16-1 Camera range Brake light cameras Monitor Installation
More informationiphone 6 Plus Front Facing Camera and Sensor Assembly Replacement
iphone 6 Plus Front Facing Camera and Sensor Assembly Replacement Replace the Front-Facing Camera and Sensor Assembly in your iphone 6 Plus. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page
More informationEmatic Genesis Screen Replacement
Screen replacement for the Ematic Genesis tablet Written By: Justin Rohrman ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION If the screen is cracked or damaged it may need to be replaced. This
More informationUpgrading a 2U CHP to an i7 Quad Core SBC
Upgrading a 2U CHP to an i7 Quad Core SBC 1. Parts required: i7 SBC Slim line SATA DVD drive Combined SATA data and power cable for slim-line optical drive Serial port ribbon cable - 9way D male to 10
More informationInstallation Instructions
Time Commander II Electronic Time Lock Installation Instructions This Sargent & Greenleaf Time Commander II electronic time lock combines ease of operation with security. Advanced electronic circuit design
More informationHGR-2488 Prism Installation Instructions
HGR-2488 Prism Installation Instructions These installation instructions are applicable to the following models: TASCAM 2488 MK1 (original model) TASCAM 2488 MK II TASCAM 2488 NEO Page 1 of 8 Important
More informationimac Intel 21.5" Retina 4K Display (2017) Hard
imac Intel 21.5" Retina 4K Display (2017) Hard Drive Replacement Remove a broken hard drive in a 21.5" 4K imac (2017), or replace it with a faster SSD. Written By: Evan Noronha ifixit CC BY-NC-SA www.ifixit.com
More informationMonster Soundstage S2 Rear Panel Connectors Replacement
Monster Soundstage S2 Rear Panel Connectors Replacement Replace the rear panel connector boards in Monster Soundstage S2 speaker. Written By: Shaw Hughes ifixit CC BY-NC-SA www.ifixit.com Page 1 of 15
More informationWelch Allyn Connex Vital Signs Monitor 6000 Power Supply Replacement
Welch Allyn Connex Vital Signs Monitor 6000 Power Supply Replacement Replace the power supply in a 6000 series Welch Allyn Connex Vital Signs Monitor. Written By: Sam Lionheart ifixit CC BY-NC-SA www.ifixit.com
More informationDell Inspiron 1525 Upper Case Replacement
Dell Inspiron 1525 Upper Case Replacement Replace the upper case on a Dell Inspiron 1525. Written By: Miroslav Djuric ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION Use this guide to help
More informationipod Touch 5th Generation Power Button Replacement
ipod Touch 5th Generation Power Button Replacement Remove the power/sleep button from your ipod Touch 5th Generation. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 29
More informationHow to Upgrade the Hard Drive in a 24 imac (2007-Early 2009)
Instructional Video Series How to Upgrade the Hard Drive in a 24 imac (2007-Early 2009) Skill Level: Involved Time to Complete: Approximately 45 Minutes Required Tools: Small Phillips Screwdriver Torx
More informationPowerBook G4 Aluminum 12" GHz Display Data Cable Replacement
PowerBook G4 Aluminum 12" 1-1.5 GHz Display Data Cable Replacement Written By: Matthew Newsom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 47 INTRODUCTION Replace a damaged display data cable to restore
More informationDell Inspiron XPS and Inspiron 9100 Service Manual
Dell Inspiron XPS and Inspiron 9100 Service Manual Dell Inspiron XPS and Inspiron 9100 Service Manual Before You Begin Memory Module, Mini PCI Card, and Devices System Components Subwoofer Bluetooth Card
More informationMac Mini Mid 2010 SSD Installation
Mac Mini Mid 2010 SSD Installation Replace your Mac Mini Mid 2010's hard drive for more storage space and an increase in speed. Written By: Dozuki System 2017 guides.crucial.com Page 1 of 15 INTRODUCTION
More informationWritten By: Walter Galan
imac Intel 21.5" EMC 2428 CPU Replacement Replace the CPU in your imac Intel 21.5" EMC 2428. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 33 INTRODUCTION Use this guide to upgrade
More informationLeapFrog LeapPad Platinum Motherboard Replacement
LeapFrog LeapPad Platinum Motherboard Replacement In this guide, you will learn how to remove and replace the LeapPad Platinum's motherboard. Written By: Kaitlyn Kinerk ifixit CC BY-NC-SA www.ifixit.com
More informationMacBook Pro 15" Core Duo Model A1150 Keyboard Replacement
MacBook Pro 15" Core Duo Model A1150 Keyboard Replacement Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 16 INTRODUCTION This guide shows the hidden screws you must remove when replacing
More informationPowerBook G4 Aluminum 12" GHz Left Clutch Hinge Replacement
PowerBook G4 Aluminum 12" 1-1.5 GHz Left Clutch Hinge Replacement Written By: Matthew Newsom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 50 INTRODUCTION Replace a broken clutch hinge to make your display
More informationReflowing Xbox 360 Motherboard
Reflowing Xbox 360 Motherboard Reflow the solder on your Xbox 360's motherboard. Written By: Andrew Bookholt ifixit CC BY-NC-SA www.ifixit.com Page 1 of 31 INTRODUCTION Use this guide to reflow the solder
More informationimac Intel 27" EMC 2546 Right Speaker
imac Intel 27" EMC 2546 Right Speaker Replacement Replace your imac's right speaker. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION Missing half your beats?
More informationToshiba Satellite E105-S1602 Front Panel Replacement
Toshiba Satellite E105-S1602 Front Panel Replacement Use this guide to replace/remove the front panel. Prerequisite to removing the front panel for more detailed work. Written By: Ian Washburne INTRODUCTION
More information