KC2200CN 1/3" CCD DSP COLOR CAMERA INSTALLATION INSTRUCTIONS

Size: px

Start display at page:

Download "KC2200CN 1/3" CCD DSP COLOR CAMERA INSTALLATION INSTRUCTIONS"

Lucas Preston
5 years ago
Views:

1 KC2200CN 1/3" CCD DSP COLOR CAMERA INSTALLATION INSTRUCTIONS Ultrak Worldwide Support Center: 1301 Waters Ridge Drive 10 Lewisville, TX (800) (972) FAX (972)

2 ISSUE 1 February BY ULTRAK ALL RIGHTS RESERVED PRINTED IN KOREA ULTRAK 1301 WATERS RIDGE DRIVE LEWISVILLE, TX (972) ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED BY ANY MEANS WITHOUT WRITTEN PERMISSION FROM ULTRAK. THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL RESPECTS. HOWEVER, ULTRAK CANNOT ASSUME RESPONSIBILITY FOR ANY CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH CHANGES. ii

3 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the product. USERS OF THE PRODUCT ARE RESPONSIBLE FOR CHECKING AND COMPLYING WITH ALL FEDERAL, STATE, AND LOCAL LAWS AND STATUTES CONCERNING THE MONITORING AND RECORDING OF VIDEO AND AUDIO SIGNALS. ULTRAK SHALL NOT BE HELD RESPONSIBLE FOR THE USE OF THIS PRODUCT IN VIOLATION OF CURRENT LAWS AND STATUTES. iii

4 IMPORTANT SAFEGUARDS A. 7. READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. ATTACHMENTS -- Do not use attachments not recommended by the video monitor or equipment manufacturer as they may result in the risk of fire, electric shock or injury to persons. WATER AND MOISTURE -- Do not use video monitor or equipment near water -- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, or the like. ACCESSORIES -- Do not place video monitor or equipment on an unstable cart, stand or table. The video monitor or equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer. Video monitor or equipment and cart combinations should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn. VENTILATION -- Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the video monitor or equipment and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video monitor or equipment on a bed, sofa, rug, or other similar surface. Video monitor or equipment should never be placed near or over a radiator or heat register. Video monitor or equipment receiver should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. 8. POWER SOURCES -- Video monitor or equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your video monitor or equipment dealer or local power company. For video monitor or equipment designed to operate from battery power refer to the operating instructions. 9. GROUNDING OR POLARIZATION -- This video monitir may be equipped with a polarized alternation - current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug HEED WARNINGS -- Follow all instructions marked on the video monitor or equipment. LIGHTNING -- For added protection for video monitor or equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. OVERLOADING --Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY -- Never push objects of any kind into video monitor or equipment through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERVICING -- Do not attempt to service video monitor or equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE -- Unplug video monitor or equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power-supply cord or the plug has been damaged. B. If liquid has spilled, or objects have fallen into the video product. C. If the video product has been exposed to rain or water. D. If the video product does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. E. If the video product has been dropped, or the cabinet damaged. F. When the video product exhibits a distinct change in performance -- this indicates a need for service. REPLACEMENT PARTS -- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. SAFETY CHECK -- Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. FIELD INSTALLATION -- This installation should be made by a qualified service person and should conform to all local codes. iv

5 FCC COMPLIANCE STATEMENT INFORMATION TO THE USER : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE MORE OF THE FOLLOWING MEASURES : - REORIENT OR RELOCATE THE RECEIVING ANTENNA - INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER - CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED - CONSULT THE DEALER OF AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURED COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. CET APPAREIL NUMÉRIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU RÈGLEMENT SUR LE MATÉRIEL BROUILLER DU CANADA. v

6 vi THIS PAGE INTENTIONALLY LEFT BLANK.

7 TABLE OF CONTENTS SECTION 1 ABOUT THE KC2200CN CAMERA PURPOSE FEATURES...1 SECTION 2 CAMERA CONTROLS AND CONNECTIONS CAMERA BACK CAMERA FRONT CAMERA SIDE...4 SECTION 3 CAMERA INSTALLATION AND ADJUSTMENT CONTENTS OF PACKAGE BASIC INSTALLATION MANUAL IRIS LENS ADJUSTMENT VIDEO-TYPE AUTO-IRIS LENS INSTALLATION AND ADJUSTMENT DC-TYPE AUTO-IRIS LENS INSTALLATION AND ADJUSTMENT BACKFOCUS ADJUSTMENT ZOOM LENS BACKFOCUS ADJUSTMENT SECTION 4 TROUBLESHOOTING...15 SECTION 5 SECTION 6 PREVENTIVE MAINTENANCE...17 SPECIFICATIONS...19 vii

8 viii THIS PAGE INTENTIONALLY LEFT BLANK.

9 SECTION 1 ABOUT THE KC2200CN CCD DSP COLOR CAMERA 1.1 PURPOSE This manual describes how to set up and operate the KC2200CN camera. 1.2 FEATURES The KC2200CN DSP color security camera provides a low-cost solution to closed-circuit television (CCTV) and security surveillance applications. The features of this camera include: 1/3" Interline Transfer CCD Image Sensor A professional-level camera chip that achieves a very high quality picture. Support for Standard CS- or C-mount Lens Compatibility with Video- or DC-type Auto-iris Lens Electronic Iris Automatically adjusts the camera for changes in lighting to ensure an optimal picture at all times. Camera Stand/Mount Allows the camera to be mounted to shelves, walls, ceilings and many other structures. Excellent Picture Quality IMPORTANT: The user of this system is responsible for checking and complying with local, state and federal laws and statutes concerning the recording and monitoring of audio signals. 1

10 2 THIS PAGE INTENTIONALLY LEFT BLANK.

11 SECTION 2 CAMERA CONTROLS AND CONNECTIONS BACK VIEW FRONT VIEW ON E.I. OFF IRIS LEVEL AUTO IRIS VIDEO DC MONITOR INTERPHONE SIDE VIEW CAMERA BACK 1. EI Switch This switch turns on and off the electronic iris function. 2. Auto Iris Switch This switch allows the user to select between video- and DC-type auto-iris lenses. 3. Monitor Port - The cable from the monitor plugs into this port. continued on next page 3

12 2.1 CAMERA BACK, continued 4. Interphone Port - Optional accessories are plugged into this port. Up to two alarming devices may be connected to each camera with the purchase of an optional two-way connector. Motion sensors, alarm contacts and two-way intercom boxes can also be connected to this port. To purchase optional accessories, contact your authorized Ultrak dealer/distributor. 5. Iris Level Control This control adjusts the picture for optimum quality when used with a dc iris lens. 2.2 CAMERA FRONT 6. Backfocus Lock Screw Allows the user to secure the backfocus setting. 2.3 CAMERA SIDE 7. Backfocus Ring Allows the user to adjust the focus of the lens. 8. Auto-iris Lens Connector This port allows the user to connect an auto-iris lens. 9. Camera Mounting Bracket This bracket is used to mount to the camera stand for secure installation. 4

13 SECTION 3 CAMERA INSTALLATION AND ADJUSTMENT 3.1 CONTENTS OF PACKAGE Installation of the KC2200CN camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. The contents of the package includes: 1. Color CCD camera with CS lens mount 2. Mini-DIN connector (for video- or dc-type auto-iris lens) 3. C-lens mount 4. Camera stand 5. Camera cable 3.2 BASIC INSTALLATION After unpacking and identifying the package contents, perform the following steps to connect the camera to an observation system. 1. Locate the following items, which may be needed during installation but are NOT supplied with the KC2200CN camera: Camera lens Observation monitor Welder s glass Mounting hardware Tools continued on next page 5

14 3.2 BASIC INSTALLATION, continued 2. Select a suitable location for the camera. IMPORTANT: Contact your authorized Ultrak dealer/distributor to purchase longer cables. 3. After selecting a location for the camera, use a suitable fastener and necessary tools to mount the camera stand to a structural object that can support the weight of the camera and mount, such as a wall stud, shelf, ceiling rafter, etc. IMPORTANT: The maximum recommended load of the mounting bracket is 11 lbs (5Kg). 4. The KC2200CN observation camera has a ¼"-20 UNC mounting hole located at the top and the bottom of the camera housing to allow for top or bottom mounting. Mount the camera on the stand by threading the mounting bolt into either mounting hole on the camera. IMPORTANT: Do not aim or point the camera towards the sun or into a strong light. continued on next page 6

15 3.2 BASIC INSTALLATION, continued 5. If a CS-mount lens is used, attach the lens directly on the backfocus ring. or If a C-mount lens is used, attach the C-mount ring to the backfocus ring before attaching the C-mount lens. C Mount Ring (C-MOUNT LENS) (CS-MOUNT LENS) Back Focus Ring If a video-type auto-iris lens is used, please consult section 3.4 for installation instructions. If a dc-type auto-iris lens is used, please consult section 3.5 for installation instructions. 6. Route the assembled cable from the monitor location to the camera location. WARNING: Care should be taken when routing the cable from the monitor to the camera. Try not to put unnecessary strain on the cable or connectors. Do not place the cable next to fluorescent lights as interference may result. Do not use staples to support the cable as they may damage the cable. If the provided camera cable is not long enough, do not substitute a telephone cable as it could damage the camera and/or the monitor. Contact your authorized Ultrak dealer/ distributor to purchase longer cables. continued on next page 7

16 3.2 BASIC INSTALLATION, continued 7. Plug the cable into the connector port labeled MONITOR located on the back of the camera. 8. Plug the other end of the cable into the corresponding camera connector port on the back of the observation monitor. 9. Plug the monitor s power cable into a suitable wall outlet. 10. Turn on the monitor s power switch(es). The monitor should display images for the connected camera(s). For more information on system installation and camera display options, refer to the observation monitor or system manual. 11. Adjust the lens focus and iris control for an optimum picture. 3.3 MANUAL IRIS LENS ADJUSTMENT A manual iris lens is used in indoor applications where lighting from windows can considerably affect the light level of the room. When using the manual iris lens, perform the following: 1. Set the EI switch to ON. 2. Turn the iris ring on the lens to the fully OPEN position 3. Focus the lens to obtain optimum picture. 4. To increase the camera s depth of field, slightly close the manual iris by approximately five to ten percent. 8

17 3.4 VIDEO-TYPE AUTO-IRIS LENS INSTALLATION AND ADJUSTMENT The KC2200CN camera supports video-type auto-iris lenses to adjust for changing light levels. Perform the following steps to install and adjust a video-type auto-iris lens. 1. Thread the video-type auto-iris lens onto the lens mount on the front of the camera. 2. If necessary, solder the lens control wires to the connector supplied with the camera. Use the following pin-out and wire color-coding chart as a guide. PIN NAME WIRE COLOR 1 Voltage + Red 2 Open -- 3 Video White 4 Ground Black Open Voltage + / Red Video / White Ground / Black 3. Plug the connector into the auto-iris lens jack on the side of the camera. The connector is keyed and can only be inserted into the jack one way. 4. Make sure that the EI switch located on the back of the camera is set to OFF. continued on next page 9

18 3.4 VIDEO-TYPE AUTO-IRIS LENS INSTALLATION AND ADJUSTMENT, continued 5. Apply power to the KC2200CN camera. 6. Adjust the focus ring on the lens for an optimum picture. If the picture is not visible, set the lens for proper exposure by adjusting the ALC (automatic level control) and Level on the lens. The ALC setting can range between AVG (average) or PK (peak). An AVG setting is appropriate for most applications. For ALC adjustments: AVG To slow the reaction of the lens to changing light, set the range on the AVG setting to average the video level from the camera. Use this when there are bright spots in the picture, such as lights or glare from the sun. PK To increase the speed of the lens reaction to the changing light, set the lens adjustment to PK so the lens will adjust to the brightest or peak object in the video. Use this setting if you want to see the brightest object and not the background objects. For Level adjustments: Adjust the Level control for the best picture during the day. A night adjustment may not provide the proper setting for controlling the light during the day. 7. Set the backfocus of the camera before the final adjustment of the video level. See section 3.6 for further instructions. continued on next page 10

19 3.4 VIDEO-TYPE AUTO-IRIS LENS INSTALLATION AND ADJUSTMENT, continued 8. If the auto-iris has a gain adjustment, perform the following: a. If the lens oscillates between open and closed under bright lights, slowly turn the gain adjustment counter-clockwise until the oscillating stops. b. Increase the light getting to the camera by adjusting the level control and readjusting the gain control as necessary. c. Reset the level control as instructed in step DC-TYPE AUTO-IRIS LENS INSTALLATION AND ADJUSTMENT The KC2200CN camera supports dc auto-iris lenses. Perform the following steps to install and adjust a dc-type auto-iris lens. 1. Thread the dc iris lens onto the lens mount on the front of the camera. 2. If using an Ultrak lens, skip to step three. If using a non-ultrak lens, use the manufacturer s instructions to solder the connector that comes supplied with the camera to the lens control wires. The pin-out and wire color-coding for DC-type autoiris lenses can vary from one manufacturer to another. 3. Plug the connector into the dc iris jack on the side of the camera. The connector is keyed and can only be inserted into the jack one way. continued on next page 11

20 3.5 DC-TYPE AUTO-IRIS LENS INSTALLATION AND ADJUSTMENT, continued 4. Make sure that the EI switch located on the back of the camera is set to OFF. 5. Apply power to the KC2200CN camera. 6. Adjust the dc-type auto-iris lens for an optimum picture using the IRIS LEVEL control on the back of the camera. 3.6 BACKFOCUS ADJUSTMENT Although the camera lens was backfocused by the manufacturer prior to shipping, it may be necessary to make modifications. For best results, perform back focus adjustments at night or while using a #6 or #8 welder s glass in front of the lens. The focus of the camera will change slightly if the camera iris was adjusted on a light scene and then changes to a dark scene. However, the camera will remain in focus if the iris was focused on a dark scene and the scene lightens. To make backfocus adjustments, perform the following: 1. After mounting the lens on the camera, apply power. 2. Open the camera iris by turning the lens level control counterclockwise. 3. If a picture is visible, focus on the scene. Open the lens as wide as possible by placing a welder s glass in front of the lens. continued on next page 12

21 3.6 BACKFOCUS ADJUSTMENT, continued 4. When the iris is open to the widest point, readjust the focus for a clear picture. If a clear picture is not visible, set the focus ring to midrange. 5. Loosen the backfocus lock screw. 6. Adjust the backfocus ring for a clear picture. 7. Tighten the backfocus lock screw. 8. Fine-tune the focus with the focus ring on the lens. 9. Remove the welder s glass from the front of the lens. 10. Adjust the level control of the lens for the best picture quality. 3.7 ZOOM LENS BACKFOCUS ADJUSTMENT The objective of backfocusing a zoom lens is similar to that of a fixed focal length camera, except that the backfocus is also adjusted to maintain the focus when zooming the lens in and out of a scene. For zoom lens backfocus adjustment, perform the following: 1. Choose an object at the farthest range that you wish to look at with a zoom lens. 2. Make sure that the iris of the lens is wide open. For best results, make the adjustment by using a welder s glass placed in front of the lens. 3. Adjust the focus to stop on the far range. 4. Adjust the zoom on the lens to obtain the widest picture. continued on next page 13

22 3.7 ZOOM LENS BACKFOCUS ADJUSTMENT, continued 5. Loosen the backfocus lock screw. 6. Adjust the backfocus ring for the clearest picture. 7. Adjust the zoom on the lens to the far telephoto position. 8. Adjust the backfocus ring for the clearest picture. 9. Adjust the zoom on the lens back to the widest picture. 10. Readjust the backfocus for the clearest picture. 11. Tighten the backfocus lock screw. IMPORTANT: Verify that the camera remains in focus after tightening the lock screw. On occasion, tightening the lock screw can cause the camera to be slightly out of focus. 12. Repeat the previous steps as many times as necessary to maintain a clear picture through the entire zoom range. 14

23 SECTION 4 TROUBLESHOOTING If problems occur, verify the installation of the camera with the instructions in this manual and with other operating equipment. Isolate the problem to the specific piece of equipment in the system and refer to the equipment manual for further information. PROBLEM NO POWER POWER, BUT NO PICTURE CHECK Make sure the system is plugged in. Make sure the main power switch on the back of the observation monitor is in the on position. Check the outlet for power. Make sure the power switch on the front of the monitor is on. Make sure there is nothing blocking the lens of the camera. Make sure the camera cable is plugged into the monitor and the camera. VIDEO, BUT NO CONTROL Power down the system for one minute. Then turn power back ON. 15

24 16 THIS PAGE INTENTIONALLY LEFT BLANK.

25 SECTION 5 PREVENTIVE MAINTENANCE Following the preventive maintenance schedule allows detection and correction of minor faults before they become serious and cause equipment failure. Every three months, perform the following: A. Inspect all connecting cables for deterioration or other damage. B. Clean components with a clean damp cloth. C. Verify that all the mounting hardware is secure. 17

26 18 THIS PAGE INTENTIONALLY LEFT BLANK.

27 SECTION 6 SPECIFICATIONS Image Sensor: Video Format: Horizontal Frequency: Vertical Frequency: Resolution: Signal/Noise Ratio: Minimum Illumination: Video Output: Synchronization: Electronic Shutter: Lens: Camera Mount: Camera Connector: Power Consumption: Ambient Temperature: Ambient Humidity: Dimensions: Weight: 1/3" color CCD NTSC KHz Hz >330 TV lines 46dB (AGC off) 2.0 Lux (F1.2) 1.0 Vp-p, 75 Ohms, unbalanced External/observation monitor Automatic, 1/60 ~ 1/100,000 sec. C or CS mount (adjustable backfocus ring) 1/4" 20 UNC (top/bottom) RJ-11-E 15V dc, 3.0W max. 14 F to 122 F (-10 C to +50 C) 0~96% (non-condensing) 2.2W x 2.0H x 4.8D in (56W x 51H x 122D mm) 0.46 lb (210g) 19

28 Made in Korea Printed in Korea REV. 02/00 20

KC452xMx/KC652xMx USER MANUAL 1/3" BLACK-AND-WHITE CCD CAMERA

KC452xMx/KC652xMx USER MANUAL 1/3 BLACK-AND-WHITE CCD CAMERA KC452xMx/KC652xMx 1/3" BLACK-AND-WHITE CCD CAMERA USER MANUAL Ultrak Worldwide Support Center Sales & Technical Support 1301 Waters Ridge Drive Lewisville, TX 75057 (800) 796-2288 (972) 353-6400 FAX (972)