DS99 Simple Operation Guide to Deest Geriatric Smart Watch D99. (Product color is subject to actual product)

Transcription

1 DS99 Simple Operation Guide to Deest Geriatric Smart Watch D99 (Product color is subject to actual product) 1

2 I. Basic Functions of the Product GPS+ base station +WIFI three-mode positioning SOS Electronic fence Anti-dropoff alarm Historical traces Two-way conversation II. SIM Card Installation: Step 1: In accordance with prompt direction of SIM card slot in the watch, install Micro SIM card (China Mobile 2G card), and activate caller ID display function, monthly package (30M/monthly package is recommended). Step 2: Press and hold On/Off key until the screen is lit, the screen will show that the watch enters the power-on state. (When the watch reads the card and can receives the signal, it can t be powered off locally. To power it off, use mobile APP.) Step 3: Download the APP to your mobile phone (scan quick response code prompted by the instruction manual). Watch number login is ID number on the back of watch, initial password is: ) Remarks: All the devices can make a phone call to the watch when the watch leaves the factory. The user can fill in main monitoring number in the settings; after setting 2

3 up main monitoring number successfully, only main monitoring number, SOS number, numbers of white list and address book can make a phone call to the watch. III. APP Using Steps: 1: APP Download and Login Use the mobile phone to scan the below quick response code or enter the domain name in the browser: Apple APP client Android APP client Step 2: Login Open APP, select the watch number login method, enter ID number (can be found on the back of watch), enter the password (factory default password: ), and then can use APP normally. You are advised to enter the backstage and change the login password after successful login. 3

4 3: APP Using Instructions Watch positioning: Click the watch positioning to see the latest position of watch. The map also can be freely zoomed out as you like. 4

5 2.Historical traces It can find out where the old man with the watch has been to. 3.Safe area It can set up various safe areas; if the old man leaves the safe areas, APP will automatically receive the alerting. 4.Weiliao Through Weiliao function, it can interact with the old man just like weixin chat. 5.Settings GPS position data uploading interval: There are three modes available; quick positioning can upload the position information every 30 seconds, the positioning mode 5

6 updates the position timely but is power-consuming, please don t use the mode for a long time. When the watch leaves the factory, it is defaulted as uploading the position information every 10 minutes (the mode is recommended). The third is power saving mode, the watch uploads the position information every one hour. Set up main monitoring number which accepts the low battery alarm information. After setting up main monitoring number, the watch only accepts incoming calls from white list, main monitoring number, familiarity number and address book to avoid unwanted calls. Voice monitoring: Enter your phone number in the dialog box, click confirm, and the watch will dial your phone number immediately after a command returns. Speaker of the watch is disabled in the conversation and does not make any sound. Set up familiarity number: Besides son's and daughter-in-law's numbers, numbers of other guardians also can be set. Enter a guardian's number, and confirm. The setting is successful if the watch shows that the command has been returned. Long press SOS key, the watch will automatically dial the familiarity numbers; dial the numbers for two turns if there is no answer. Set up a white list. Add the familiarity numbers of the 6

7 watch, more relatives can directly contact with the old man. Address book: Enter the name and phone numbers, set up the contact persons of watch. Click Phone key to jump out all the contact persons, press Phone key downwards, long press Phone key to dial the corresponding number of contact person. Take-off alarm: If the watchband is unbuckled after the watch has been worn for more than three minutes, the APP client will receive a warning message showing that the watch is taken off. You can disable this function when doesn t wear the watch. Set up language and time: Select the local time zone according to your country. Eastern time zone should be added + before time zone digit; western time zone should be added - before time zone digit. Example: GMT+8 is +8, GMT- 03 is -3. IV. Watch Operation 1. Up key/sos1: If the watch has GSM signal, long press the key to dial familiarity number 1; when the phone book jumps out, press the key to upwards select the contact person. 2. On/Off key/record key: If the watch doesn t insert the phone card, long press Off key to turn off the watch; if the 7

8 watch inserts the phone card and has GSM signal, long press the key but can t turn off the watch; in order to power it off, use mobile APP. Long press Record key to record, the longest recording time is 13 seconds, loosen your hand to send the voice to APP; click twice continuously, it can play the voice sent by APP. 3. Down key/phone key/sos2: Click Phone key once, jump out all the contact persons, press Phone key again, select the contact persons downwards, long press and dial the selected number. If no contact person is popped up, long press Down key to dial familiarity number SOS key: If there is GSM signal, long press SOS key to dial the familiarity numbers again; if there is no answer, dial the numbers for 2 turns. 8

9 V. Common Problem Solving When the watch is not on-line and not positioned, please set up APN parameter of SIM card in the watch, make the watch work normally. Because different SIM card communications operators in different countries have different APNs, in order to understand APN of your SIM card, please consult with local communications operators. Please use your mobile phone to edit pw,123456,apn, network name# and send to SIM card number of the watch. Example: pw,123456,apn,cmwap# In the example, cmwap stands for APN of China Mobile operator. If sets up APN successfully, reply the information APN setting is successful. It prompts that the number you dialed is busy now when dials the watch with your mobile phone. The SIM card has not activated the caller ID display yet, so that the watch can t identify any number. Please activate this function of SIM card in the watch. If Sending or Sending Failed is always displayed after commands are set on the APP client, the reason may be one of the following: 9

10 a There is no signal or weak signal of a GPRS network at the place of the watch, so that GPRS data cannot be transmitted; b SIM card of the watch doesn t activate GPRS function. You are advised to subscribe to a 30M monthly package. c The line is engaged. GPRS data transmission will be automatically stopped during a GSM call. The APP client shows that the watch is off-line all the time: a Balance of the SIM card is insufficient, so that data transmission and call services are prohibited. b The watch is powered off or suffering a power outage. c There is no signal or weak signal at the place of the watch (in such case, the watch data can be uploaded to the server). The distance between the watch and a base station is as long as several hundreds meters: the watch is in base station positioning state. The positioning precision depends on the density of base stations around the watch. The actual precision of base station positioning is 50 to 1000 meters. (You can log in webpage service platform, filter LBS in more and device information, turn off the base station positioning.) 10

11 SMS instruction set: Setting category Instruction format Set up main pw,123456,cente control r,mobile phone number number # Set up SOS number Delete SOS number Inquire about position Voice monitoring Upload time interval Set up APN parameter pw,123456,sos*, mobile phone number# (*: sos S/N) pw,123456,sos*, d# (*: sos S/N) pw,123456,url# pw,123456,monit or, mobile phone number # pw,123456,uploa d, time# pw,123456,apn,a pn name # 11 Instruction case pw,123456,center, # pw,123456,sos1, # pw,123456,sos2,d # pw,123456,url# pw,123456,monitor, # pw,123456,upload, 300# (300S) pw,123456,apn,cm wap#

12 Set up language and time zone Set up ip and port Inquire about parameter Restore factory settings pw,123456,lz,x,y # (x: language, y: time zone) pw,123456,ip,x.x.x.x,y# (x: ip, y: port) pw,123456,ts# pw,123456,factor y# pw,123456,lz,0,8# pw,123456,ip,101. gpsjm.com,8500# pw,123456,ts# pw,123456,factory # 12