Cisco IP Phones. Quick Start Guide SPA303. Tel Woodley Ave., Van Nuys, CA USA

Transcription

1 Cisco IP Phones SPA303 Quick Start Guide

2 2 SPA303

3 3 Welcome Thank you for choosing the Cisco Small Business IP phone. This guide describes how to install your phone and how to perform some basic tasks. 1. Installing Your IP Phone Use this procedure to install the phone and connect it to your network. Do not insert a telephone line cord into the port marked AUX. 1 Turn the phone body over to expose the ports on the back of the unit. 2 Insert one end of the phone cord into the slot marked with a phone symbol (the Handset Port). Insert the other end into the jack at the bottom of the handset (not shown). 3 (Optional) Connect the desk stand by lining up the tabs on the desk stand with the slots on the back of the phone. Slide the bottom tabs into the slots and lightly press down on the top of the desk stand. It should easily slide into the top slots. Do not force. 4 If you are using an external power source, plug one end of the power cord into the building s power outlet and insert the other end of the power cord into the phone base. 5 Connect your phone to the network using an Ethernet Connection. Insert one end of the Ethernet cable into the network port on the phone body marked SW. Insert the other end of the Ethernet cable into the appropriate device, such as a network switch, on your network. 6 (Optional) To provide network access to a PC, connect one end of an additional Ethernet cable (not provided) to the PC port on the back of the phone body. Connect the other end of the Ethernet cable to the network port on your PC. 7 (Optional) To install the phone on a vertical surface, use the Cisco MB100 Wall Mount bracket. See the Cisco Small Business IP Phone SPA 50X User Guide (SIP) or the Cisco Unified Communications Manager Express for the Cisco Small Business IP Phone SPA 50X documents on for more information. The Where to Go From Here section contains links to the documentation area on

4 4 2. Cisco SPA303 Diagram Numbered objects in the photo are explained in the following table. # Phone Feature Description 1 Handset Pick up to place or answer a call. 2 Message Waiting Indicator Displays solid red when you have a new voice mail message. Flashes red during an incoming call or when the phone s firmware is being updated. 3 LCD Screen Displays date and time, phone station name, line extensions and softkey options. 4 Line keys Indicates phone line status. Typically when lit: Green: Line is idle. Red (steady): Line is active or in use. Red (blinking): Line is on hold. Orange: Line is unregistered (cannot be used). Orange (Flashing): The phone is not connected to the network. 5 Softkey buttons Press a softkey button to perform the action shown on the label on the LCD screen above. 6 Navigation button Press an arrow to scroll left, right, up, or down through items shown on the LCD screen. 7 Messages button Press to access voice mail (must be set up by your phone system administrator). 8 Hold button Press to place a call on hold. 9 Setup button Press to access a menu to configure features and preferences (such as your directory and speed dials), access your call history and set up functions (such as call forwarding). 10 Mute button Press to mute or unmute the phone. When phone is muted, the button glows red. A flashing mute button indicates the network connection cannot be found. 11 Headset button Push to turn the headset on or off. When the headset is on, the button glows green. 12 Volume button Press + to increase the volume and - to lower the volume of the handset, headset, speaker (when the handset is off the phone), or ringer volume (when the handset is on the phone). 13 Speaker button Push to turn the speaker on or off. When the speaker is on, the button glows green. 14 Keypad Use to dial phone numbers, enter letters and choose menu items.

5 5 3. Softkey Buttons Press the right arrow on the navigation button to view additional softkey buttons. Below is a partial listing of softkey buttons that are available on your phone. Phone Feature Description << or >> Move left or right through an entry without deleting characters. add apps bxfer callpark cancel cfwd -cfwd clear conf conflx confserv delchr delete dial dir dnd -dnd edit endcall exit hold intercom join lcr missed calls more record redial resume save select Add an entry. Accesses supported provider applications. Performs a blind call transfer (transferring a call without speaking to the party to whom you are transferring the call). Puts a call on hold at a designated park number. The call is parked on the line until you unpark it or the caller disconnects. Must be configured by your phone system administrator. Cancels any changes you have made (press cancel before pressing Ok or save). Forwards all calls coming to your phone to a specified number. Clears Call Forward. Clears the entry. Initiates a conference call. Brings active lines on the phone together into a conference call. Dials into the provider conference bridge. Deletes the last number or letter. Deletes an entire item (for example, a number from the Call History list). Dials a number. Provides access to phone directories. Do Not Disturb; prevents incoming calls from ringing your phone. Clears Do Not Disturb. Opens an item so that you can edit numbers or letters, or enable or disable a feature. Ends the call in progress. Closes a menu. Places a call on hold. Allows you to automatically connect to a remote extension. Joins two calls into a conference call and drops you from the call. Returns the last missed call by dialing the number that called you. Shows the Missed Calls list. Displays other softkey buttons that are available. Records the call in progress. Displays a list of recently dialed numbers. Resumes a call that is on hold. Saves your changes. Selects the highlighted item on the LCD screen.

6 6 4. Using Your IP Phone PLACING OR ANSWERING CALLS To place or answer a call, you can pick up the handset, press the Speaker or Headset button, or press a line button. 5. Using Keyboard Shortcuts When using the phone menus, you can use the keypad to enter the number shown next to the menu or sub-menu item on the LCD screen. For example, to obtain your IP address, press the Setup button and dial 9. PUTTING A CALL ON HOLD To put a call on hold, press the Hold button. The caller hears a series of three rapid beeps or music while on hold. To resume the call, press the flashing red line button for the call or the Resume softkey. ENDING A CALL If you are using the handset, hang up or press the endcall softkey. If you are using the Speaker phone, press the Speaker button. If you are using the headset, press the Headset button. The IP address is displayed on the Network screen. ADJUSTING VOLUME AND MUTING To adjust the volume of the handset or speaker, lift the handset or press the speaker button. Press + on the Volume button to increase the volume, or press - to decrease the volume. Press Save. To adjust the ringer volume, press the Volume button when the handset is on the phone and the Speaker button is off. Press the Save softkey. To mute the phone microphone, speaker, or headset microphone, press the Mute button on the phone. The button glows red. Press the Mute button again to unmute. REV