2018 ACADEMIC HANDBOOK

Transcription

1 2018 ACADEMIC HANDBOOK

2

3 WELCOME As you embark on this journey, the Academic Handbook is specifically designed to navigate you to the programmes conducted by Pre-Sea Marine Engineering Department. The handbook can be your guide to the entry requirements, Programme Educational Objectives (PEO), Programme Outcomes (PO), curriculum structure, syllabus synopsis, examination scheme and grading system for each programme. It is the responsibility of each student to be knowledgeable with the contents of this handbook. Students are advised to familiarize themselves with all relevant portions of the Academic Handbook and ask for clarification of any information by contacting the respective Head of Department via the Class Advisor. We wish you a successful and enjoyable academic year.

4 Diploma in Marine Engineering (DME) Entry Requirements 4 Programme Educational Objectives (PEO) 4 Programme Outcomes (PO) 5 Curriculum Structure 6-7 Syllabus Synopsis 8-15 Examination Scheme Grading System 18 Grade Point Average (GPA) and Cumulative Grade Point Average (CGPA) 18 Academic Status 18 Entry Requirements 20 Programme Educational Objectives (PEO) 20 Programme Outcomes (PO) 21 Curriculum Structure Syllabus Synopsis Examination Scheme Grading System 28 Grade Point Average (GPA) and Cumulative Grade Point Average (CGPA) 28 Academic Status 28 Marine Engineering Bridging Course for Mechanical Engineer (AEBC)

5 Engine Rating Forming Part of an Engineering Watch Course (REEW) Entry Requirements 30 Programme Educational Objectives (PEO) 30 Programme Outcomes (PO) 30 Curriculum Structure 31 Syllabus Synopsis 31 Examination Scheme 32 Grading System 33 Grade Point Average (GPA) 33 Entry Requirements 35 Programme Educational Objectives (PEO) 36 Programme Outcomes (PO) 36 Curriculum Structure 37 Examination Scheme 37 Grading System 38 Grade Point Average (GPA) 38 Able Seafarer Engine Course (REAS)

6 DIPLOMA IN MARINE ENGINEERING (DME) 2018

7 PRE-SEA MARINE ENGINEERING DEPARTMENT 4 This course is intended for students who are/have: Male/Female Single Between years on date of commencement of the course Medically and physically fit for sea service Normal colour vision A SPM/or equivalent UK GCE O level certificate with: A credit in English Language A credit in Bahasa Melayu A credit in Mathematics A credit in Additional Mathematics A credit in Physics Three years after graduation, the graduates would be: PEO 1 A Marine Engineer who analyzes and applies the knowledge, understanding and proficiency while providing services to the maritime industry. A Marine Engineer who leads and engages in teams in problem solving tasks through analytical thinking and effective communicative abilities. PEO 2 PEO 3 A Marine Engineer who continues to advance his/her knowledge and competencies to explore future development in the maritime industries. A Marine Engineer who practices ethical and professional values in providing services to the recipients and providers of the maritime industry. PEO 4

8 5 AKADEMI LAUT MALAYSIA At the end of this program, students should be able to: PO1 Apply knowledge, understanding and proficiency of theories and principles of shipboard machineries PO4 Communicate and articulate information and ideas effectively in both verbal and written forms PO5 Work effectively in a multinational ambience applying team working skills PO6 Apply values, ethics, morality and professionalism in their career pursuit PO2 Discover, process, interpret, analyse and predict problems related to marine engineering at operational and management level PO7 Manage information and engage in lifelong learning PO3 Identify and suggest possible solutions to marine engineering issues PO8 Apply managerial and entrepreneurial skills contributing to the safety of personnel and ship PO9 Demonstrate leadership qualities

9 PRE-SEA MARINE ENGINEERING DEPARTMENT 6 Semester 1 Code Subjects Credit Hours 1. DEA 1012 Business English 2 2. DEA 1113 Engineering Mathematics I 3 3. DEA 1311 Fluid Mechanics 1 4. DEA 1413 Applied Thermodynamics I 3 5. DEA 1511 Engineering Drawing I 1 6. DEA 1611 Engineering Materials I 1 7. DEA 1623 Applied Mechanics I 3 8. DEA 1713 Electrotechnology I 3 9. MPU 2411 Co-curriculum Training DEA 1912 Engineering Workshop Skills I 2 Total Credit Hours 20 Semester 2 Code Subjects Credit Hours 1. DEA 1022 Maritime English 2 2. DEA 1031 Computer System and Application 1 3. DEA 1123 Engineering Mathematics II 3 4. DEA 1212 Marine Instrumentation & Controls 2 5. DEA 1322 Naval Architecture & Ship Constructions I 2 6. DEA 1423 Applied Thermodynamics II 3 7. DEA 1432 Marine Engineering Knowledge 2 8. DEA 1922 Engineering Workshop Skills II (Maintenance) 2 9. MPU 2212 Professional Ethics MPU 2113/ Pengajian Malaysia/ MPU 2123 Bahasa Melayu Komunikasi 3 Total Credit Hours 20

10 7 AKADEMI LAUT MALAYSIA Semester 3 Code Subjects Credit Hours 1. DEA 2333 Naval Architecture & Ship Construction II 3 2. DEA 2932 Plant Maintenance/Laboratory Training I 2 3. DEA 2523 Engineering Drawing II 3 4. DEA 2633 Applied Mechanics II 3 5. DEA 2723 Electrotechnology II 3 6. DEA 2733 Electronics and Laboratory 3 7. MPU 2313 Application Of Leadership And Teamworking Skills 8. MPU 2421 Co-curriculum Training II 1 Total Credit Hours 21 Semester 4 Code Subjects Credit Hours 1. DEA 2222 Marine Controls & Automation 2 2. DEA 2443 Engineering Knowledge (General) 3 3. DEA 2453 Engineering Knowledge (Motor) 3 4. DEA 2463 Engineering Knowledge (Steam) 3 5. DEA 2942 Plant Maintenance/Laboratory Training II 2 6. DEA 2533 Engineering Design 3 7. DEA 2743 Marine Electrical Practice 3 Total Credit Hours 20 Semester 5 & 6 (Minimum 12 months) Code Subjects Credit Hours 1. DEA 3959 *Shipboard Training I 9 2. DEA 3969 Shipboard Training II 9 Total Credit Hours 18 *Mandatory Completion of MARDEP Shipboard Training Record Book 3

11 PRE-SEA MARINE ENGINEERING DEPARTMENT 8 Syllabus Synopsis Semester 1 DEA 1012 Business English The subject familiarizes the students with the basic components of Business English. The module shall assist the students to improve their existing knowledge of English language to a position where they can handle text books, business documents, presentations, and instructions they will meet in college as well as on board ship. DEA 1113 Engineering Mathematics I The subject provides the students with the understanding of the fundamentals of trigonometry and basic calculus. The module shall familiarize the students with the elementary principles and theorems relating to each topic and the application of these principles to engineering problems. DEA 1311 Fluid Mechanics The subject provides the students with the basic understanding of fundamentals of fluid Mechanics. The module shall familiarize the students in the analysis of the elementary principles and theorems relating to forces in equilibrium with an emphasis on the application on these principles to engineering problems. DEA 1413 Applied Thermodynamics I The subject provides the students with the understanding of the fundamentals of Thermodynamics. The module shall familiarise the students with the concept, working principles and operation of thermal plants.

12 9 AKADEMI LAUT MALAYSIA Syllabus Synopsis Semester 1 DEA 1511 Engineering Drawing I The subject enables the students to demonstrate an adequate skill related to engineering drawing information and requirements. DEA 1611 Engineering Materials I The subject provides the students with the understanding of the properties and production methods of various type of engineering materials. DEA 1623 Applied Mechanics I The subject provides the s t u d e n t s w i t h t h e u n d e rs ta n d i n g i n t h e fundamentals of Mechanics. The module shall familiarize the students in the analysis of the elementary principles and theorems relating to forces in equilibrium with an emphasis on the application on these principles to engineering problems. DEA 1713 Electrotechnology I The subject provides the students with the basic k n o w l e d g e o f e l e c t r o t e c h n o l o g y b y introducing the concepts of electrical resistance, voltage, current flow in dc circuits, principles of electro-magnetic induction and application of electrotechnology on board ship. DEA 1912 Engineering Workshop Skills I (Bench Fit ting) The subject equips the students with the basic knowledge on basic safety procedures and equipment in the workshop and on board ship. DEA 1912 Engineering Workshop Skills I (Centre Lathe) The subject equips the students with the basic knowledge on basic safety procedures and equipment in the workshop and on board ship.

13 PRE-SEA MARINE ENGINEERING DEPARTMENT 10 Syllabus Synopsis Semester 2 DEA 1022 Maritime English The subject familiarizes the students with the IMO SMCP, Maritime English vocabulary and shipping terms. The specific aim is to nurture and improve students communicative ability via Communicative Approach and VAK learning styles. The subject shall prepare students for developing the knowledge, understanding and proficiency in Maritime English especially the SMCP (Standard Marine Communication Phrases) and Marine Communication. DEA 1031 Computer System and Applications The subject familiarizes the students with the Personal Computer operating system, Spreadsheet application software, introduction to programming language and introduction to Matrix Laboratory (MATLAB). DEA 1123 Engineering Mathematics II The subject provides the students with the understanding of the fundamentals of basic calculus, matrices and probability. The module shall familiarize the students with the elementary principles and theorems related to each topic and the application of these principles to engineering problems. DEA 1212 Marine Instrumentation and Controls The subject provides the s t u d e n t s w i t h t h e understanding of basic principles of instrumentation and to familiarize with practical application on board ship.

14 11 AKADEMI LAUT MALAYSIA Syllabus Synopsis Semester 2 DEA 1322 Naval Architecture and Ship Construction I The subject provides the students with an understanding of the principles that maintain the stability of ocean going ships under various conditions of cargo loading and seaway. The subject also provides an understanding of the design and constructional aspects of ships with reference to effective maintenance. DEA 1423 Applied Thermodynamics II The subject provides the students with the knowledge and understanding of the application of Thermodynamics laws in the analysis of heat engine cycles, characteristics of internal combustion engine performance, performance characteristics of refrigeration system, various mode of heat transfer and basic design and performance of steam turbines. DEA 1432 Marine Engineering Knowledge The subject provides the students with a general basic knowledge of ships main propulsion engines and their associated auxiliary machineries including diesel engine, marine boilers, steam turbine and gas turbine. DEA 1922 Engineering Workshop Skills II (Maintenance) The subject provides the s t u d e n t s w i t h t h e understanding of the basic knowledge on basic safety procedures and equipment in the workshop and on board ship. DEA 1922 Engineering Workshop Skills II (Welding) The subject equips the students with the basic knowledge on basic safety procedures and equipment in the workshop and on board ship.

15 PRE-SEA MARINE ENGINEERING DEPARTMENT 12 Syllabus Synopsis Semester 2 MPU 2212 Professional Ethics This subject aims to develop students to learn, understand and practice the high values and professional ethics. As a guide to becoming an effective professional field workers and the development of Malaysia. MPU 2113 Pengajian Malaysia Mata pelajaran ini bertujuan melahirkan pelajar yang memahami peranannya dalam proses pembinaan Negara bangsa dan bersemangat patriotik dalam menghadapi cabaran pembangunan. MPU 2123 Bahasa Melayu Komunikasi Untuk memahami dan membolehkan pelajar menguasai kemahiran asas bahasa Melayu dan kecekapan berbahasa untuk berkomunikasi bagi melahirkan idea dan perasaan secara lisan dan penulisan. Syllabus Synopsis Semester 3 DEA 3333 Naval Architecture and Ship Construction II The subject provides the students with an understanding of the principles that maintain the stability of ocean going ships under various conditions of cargo loading and seaway. The subject also provides an understanding of the design and constructional aspects of ships with reference to effective maintenance. DEA 3482 Plant Maintenance/ Laboratory Training I The subject equips the students with the basic knowledge on basic safety procedures and equipment in the workshop and on board ship.

16 13 AKADEMI LAUT MALAYSIA Syllabus Synopsis Semester 3 DEA 3523 Engineering Drawing II The subject enables the students to identify and relate all different displays of drawing from an assembly drawing of a mechanical product and to list all elements which make up the assembly and establish the relationship between them by describing its functionality and to introduced computer aided design (CAD) software in the engineering drawings. DEA 3633 Applied Mechanics II The subject provides the students with the understanding of the fundamentals of Mechanics. The module shall familiarize the students in the analysis of the simple machines and the strength of materials, particularly the nature of the internal forces and deformation produced. DEA 3723 Electrotechnology II The subject provides the students with the basic knowledge of alternating current theory and principles of 3 phase ac power generation and distribution. DEA 3733 Electronics and Laboratory The subject provides the students with the basic understanding, identification and working principles of electronic components in the circuit. The module will also familiarize students in the main operation of electronic systems.

17 PRE-SEA MARINE ENGINEERING DEPARTMENT 14 Syllabus Synopsis Semester 3 MPU 2312 Application of Leadership & Team Working Skills The subject familiarizes the students with the basic concept of management in an organization to effect efficient management on board ships and ashore. The aim of the course is also to fulfil part requirements in Part A, Chapter II, Table A-II/1 and Chapter III, Table A-III/1 of the Standard Training and Certification of Watch keepers and Seafarers (STCW) Convention 1978 and 2010 Amendments in Application of Leadership and Team working Skills for aspiring deck officers and engineering officers prior issuance of Certificate of Competency as Watch keepers. Syllabus Synopsis Semester 4 DEA 3222 Marine Controls and Automation The subject provides the students with knowledge and of the working principles of m a r i n e c o n t ro l s a n d automation. DEA 3453 Engineering Knowledge (General) The subject provides the students with knowledge and u n d e r s t a n d i n g t h e constructional, operational and related system especially marine auxiliary machineries. DEA 3463 Engineering Knowledge (Motor) The subject provides the students with knowledge and understanding of the constructional, operational and related systems of marine diesel engines.

18 15 AKADEMI LAUT MALAYSIA Syllabus Synopsis Semester 4 DEA 3473 Engineering Knowledge (Steam) The subject provides the students with knowledge of the working principles of steam power plant and its associated auxiliary machinery. Dea 3492 Plant Maintenance/ Laboratory Training II The subject equips the students with the basic k n ow l e d g e o n s a fe t y procedures and equipment in the workshop and on board ship. Dea 3533 Engineering Design The subject provides the students with the understanding of basic engineering design concepts with the introduction of design analysis by Finite Element Method (FEM) using a CAD/CAE software. The module shall familiarize the students in the analysis of the strength and stiffness of machine parts due to the effects of loading. The module shall also familiarize the students in the process of selection and purchase of standard machinery components. Dea 3743 Marine Electrical Practice The subject enables the students to operate and maintain shipboard electrical system safely.

19 Computed Marks Total Weightage (%) No. of Questions to Attempt No. of Questions Time (Hours) Total Marks (Obtained Marks/Allotted Marks) x % Minimum 4 Minimum 1 hour Varied As instructed (Obtained Marks/100) x % Minimum 6 *2 hours 100 PRE-SEA MARINE ENGINEERING DEPARTMENT 16 Assessment Week Type Of Assessment Syllabus Covered Remarks Lecturer s Class Assessment During the Conduct of the Course Continuous Assessment : Written Tests Quizzes Presentations Assignments Up to Date of Assessment 1) A minimum of 2 LCAs will be conducted of which at least one will be a written test. 2) 50% weightage will be applied on the average of computed marks for all LCAs. Final Examination After the Completion of the Course Written Closed Book Examination Full Syllabus

20 17 AKADEMI LAUT MALAYSIA Notes: 1. Passing criteria: i) 50% in each LCA (minimum 2 LCA for each subject) ii) 50% in Final examination + 50% Overall (LCA+ FINAL). 1.1 If a candidate fails in any of the LCA (<50%) he/she shall be offered a Referral LCA before the Final examination. 1.2 If the candidate fail to appear in any of the LCA without any valid reason or fails in both LCA or fails in the referral LCA, he/she will n o t be allowed to appear in the Final Examination and require to repeat the failed Module/Subject in subsequent programme. 1.3 However, the candidate has to attend classes and fulfil the required attendance criteria failing which he/she may be required to r e p e a t the course. 1.4 The candidate may repeat the failed subject when offered in subsequent Programme schedules (within a stipulated period of 24 months from the date of first examination). 1.5 If the candidate fails in Final Examination, he/she shall be offered two attempts of referral final examination (within a stipulated period of 6 months from the date of first examination). 1.6 If the candidate fails in the Referral final examinations, he/she will be required to repeat the course for the failed Module/ Subject. 1.7 If the candidate fails to appear or secure a Pass in the required examinations within the stipulated period, he/she will be required to repeat the full course. 2. A final assessment by viva-voce will be conducted by Marine Department, Malaysia. Certification will be by Marine Department, Malaysia. 3. For Practical Assessments, relevant assessment sheets are used to evaluate skill levels and safe working practices. 4. Assessment based on TARB book will be carried out after completion of the shipboard training. 5. *The duration of the Final Examination for Engineering Drawing II is 3 hours

21 PRE-SEA MARINE ENGINEERING DEPARTMENT 18 Marks Grade Grade Point A A B B B C C C D D E 0.0 A and A- Distinction B+, B and B- Good C+, C and C- Satisfactory D+ and D Weak E Fail Grade Point Average (GPA) is the average grade point obtained by students at the end of a particular semester. GPA = Σ (credit x grade point) Σ (credit) Cumulative Grade Point Average (CGPA) is the average grade point obtained by students in all semesters. CGPA = Σ Σ (credit x grade point) Σ Σ (credit) SS (Satisfactory Status) PS (Provisional Status) FS (Failed Status) SS : CGPA 2.00 PS : 1.70 CGPA < 2.00 FS : CGPA < Passed and can proceed to next semester - Passed and can proceed to next semester but must not exceed 3 times (3 PS = FS) - Failed Students will be dismissed from the course if they obtained: Status FS, or Status PS for 3 semesters, or GPA < 1.00 even though CGPA > 2.00

22 MARINE ENGINEERING BRIDGING COURSE FOR MECHANICAL ENGINEER (AEBC) 2018

23 PRE-SEA MARINE ENGINEERING DEPARTMENT 20 This course is intended for students who are/have: Male/Female Not more than 28 years of age at the commencement of the course Medically and physically fit for sea service Normal colour vision A Bachelor s degree in Mechanical Engineering/Naval Architecture from a recognized university or institute with minimum a Second Class honours or equivalent grade. Note: Any other engineering degree may be considered subject to evaluation by ALAM and Marine Department. On completion of the course, students will have sufficient knowledge of the basic principles to be observed in keeping an engineering watch as per STCW Regulation III/2 and III/1 with respect to STCW 2010 and national requirements and will have sufficient knowledge, understanding and skill to carry out that part of duties and responsibilities concerned with the operation, maintenance and repair of: 1. Marine Machinery 2. Electrical, Electronic and Control Equipment 3. Controlling the Operation of the Ship 4. Care for Persons on board

24 21 AKADEMI LAUT MALAYSIA The aim of the course is to provide the students with the knowledge, understanding and skill necessary to prepare Engineering graduates who meet the entry requirements, for the Watchkeeper Certificate of Competency (Motor/Steam) for unlimited voyages. The course is conducted in 4 phases and students will need to complete the mandatory required phases as stipulated by the Director of Marine, Marine Department Malaysia. Exemption from any of the phases will only be granted by the Director of Marine, Marine Department, Malaysia. The following are the 4 phases: Phase 1 - Ship familiarization and workshop training in the academy Phase 2 - Academic and Professional Studies in the Academy Phase 3 - Shipboard/Sea Training Phase 4 - Oral preparatory course

25 PRE-SEA MARINE ENGINEERING DEPARTMENT 22 Phase 1 Code Subjects Credit Hours 1. DEB 1413 Marine Engineering Knowledge 3 2. DEB 1714 Electrotechnology and Power Electronics 4 3. DEB 1313 Naval Architecture and Ship Construction 3 4. DEB 1213 Marine Controls and Automation 3 5. DEB 1913 Marine Engineering Laboratory 3 Total Credit Hours 16 Phase 2 Code Subjects Credit Hours 1. DEB 1433 Engineering Knowledge (Motor) 3 2. DEB 1423 Engineering Knowledge (General) 3 3. DEB 1443 Engineering Knowledge (Steam) 3 4. DEB 1723 Marine Electrical Practice 3 5. DEB 1923 Marine Plant Maintenance 3 Total Credit Hours 16

26 23 AKADEMI LAUT MALAYSIA Phase 3 (4 Weeks) Mandatory Modular Courses Week 1. Basic Safety Training 1 2. Proficiency in Survival Craft & Rescue Boat 1 3. Advanced Fire Fighting 1 4. Medical First Aid 1 Total Weeks 4 Phase 4: Industrial Training Onboard Ships (52 Weeks) Shipboard Training (with Shipboard Training Record Book) 18 credits Phase 5 (2 Weeks) Oral Preparatory & Watch-keeping Course Classroom Practical Marine Engineering Watch Keeping course 32 hours NIL Oral Examination Preparatory Course (Including Mock Oral) 48 hours NIL Subtotal 80 hours NIL AEBC TOTAL DURATION 83 weeks

27 PRE-SEA MARINE ENGINEERING DEPARTMENT 24 Syllabus Synopsis Phase 1 DEB 1413 Marine Engineering Knowledge The subject provides the students with a general basic knowledge of ships main propulsion engines and their associated auxiliary machineries including diesel engine, marine boilers, steam turbine and gas turbine. DEB 1714 Electrotechnology and Power Electronics The subject provides the students with the basic knowledge of alternating current theory and principles of 3 phase ac system and introduction to electronics which integrated with power system. DEB 1213 Marine Controls and Automation The subject provides the students with knowledge and of the working principles of marine controls and automation. DEB 1313 Naval Architecture and Ship Construction The subject provides the students with an understanding of the principles that maintain the stability of ocean going ships under various conditions of cargo loading and seaway. The subject also provides an understanding of the design and constructional aspects of ships with reference to effective maintenance. DEB 1913 Marine Engineering Laboratory The subject equips the students with the basic knowledge on basic safety procedures and equipment in the workshop and on board ship.

28 25 AKADEMI LAUT MALAYSIA Syllabus Synopsis Phase 2 DEB 1433 Engineering Knowledge (Motor) The subject provides the students with knowledge and understanding of the constructional, operational and related systems of marine diesel engines. DEB 1423 Engineering Knowledge (General) The subject provides the students with knowledge and understanding the constructional, operational and related system especially marine auxiliary machineries. DEB 1443 Engineering Knowledge (Steam) The subject provides the students with knowledge and understanding the constructional, operational and related system especially marine auxiliary machineries. DEB 1723 Marine Electrical Practice The subject provides with knowledge to operate and maintain shipboard electrical system safely. DEB 1923 Marine Plant Maintenance The subject equips the students with the basic knowledge on basic safety procedures and equipment in the workshop and on board ship.

29 Computed Marks Total Weightage (%) No. of Questions to Attempt No. of Questions Time (Hours) Total Marks (Obtained Marks/Allotted Marks) x % Varied Minimum 1 hour Varied As instructed (Obtained Marks/100) x % Minimum 6 2 hours 100 PRE-SEA MARINE ENGINEERING DEPARTMENT 26 Assessment Week Type Of Assessment Syllabus Covered Remarks Lecturer s Class Assessment During the Conduct of the Course Continuous Assessment : Written Tests Quizzes Assignments Up to Date of Assessment 1) A minimum of 2 LCAs will be conducted of which at least one will be a written test. 2) 50% weightage will be applied on the average of computed marks for all LCAs. Final Examination After the Completion of the Course Written Closed Book Examination Full Syllabus

30 27 AKADEMI LAUT MALAYSIA Notes: 1. Passing criteria: i) 50% in each LCA (minimum 2 LCA for each subject) ii) 50% in Final examination + 50% Overall (LCA+ FINAL). 1.1 If a candidate fails in any of the LCA (<50%) he/she shall be offered a Referral LCA before the Final examination. 1.2 If the candidate fail to appear in any of the LCA without any valid reason or fails in both LCA or fails in the referral LCA, he/she will not be allowed to appear in the Final Examination and require to repeat the failed Module/Subject in subsequent programme. 1.3 However, the candidate has to attend classes and fulfil the required attendance criteria failing which he/she may be required to repeat the course. 1.4 The candidate may repeat the failed subject when offered in subsequent Programme schedules (within a stipulated period of 24 months from the date of first examination). 1.5 If the candidate fails in Final Examination, he/she shall be offered two attempts of referral final examination (within a stipulated period of 6 months from the date of first examination). 1.6 If the candidate fails in the Referral final examinations, he/she will be required to repeat the course for the failed Module/ Subject. 1.7 If the candidate fails to appear or secure a Pass in the required examinations within the stipulated period, he/she will be required to repeat the full course. 2. A final assessment by viva-voce will be conducted by Marine Department, Malaysia. Certification will be by Marine Department, Malaysia. 3. For Practical Assessments, relevant assessment sheets are used to evaluate skill levels and safe working practices. 4. Assessment based on TARB book will be carried out after completion of the shipboard training.

31 PRE-SEA MARINE ENGINEERING DEPARTMENT 28 Marks Grade Grade Point A A B B B C C C D D E 0.0 A and A- Distinction B+, B and B- Good C+, C and C- Satisfactory D+ and D Weak E Fail Grade Point Average (GPA) is the average grade point obtained by students at the end of a particular semester. GPA = Σ (credit x grade point) Σ (credit) Cumulative Grade Point Average (CGPA) is the average grade point obtained by students in all semesters. CGPA = Σ Σ (credit x grade point) Σ Σ (credit) SS (Satisfactory Status) PS (Provisional Status) FS (Failed Status) SS : CGPA 2.00 PS : 1.70 CGPA < 2.00 FS : CGPA < Passed and can proceed to next semester - Passed and can proceed to next semester but must not exceed 3 times (3 PS = FS) - Failed Students will be dismissed from the course if they obtained: Status FS, or Status PS for 3 semesters, or GPA < 1.00 even though CGPA > 2.00

32 ENGINE RATING FORMING PART OF AN ENGINEERING WATCH (MOTOR) (REEW) 2018

33 PRE-SEA MARINE ENGINEERING DEPARTMENT 30 This course is intended for students who are/have: At least 16 years of age Normal colour vision Medically and physically fit for sea service as per Marine Department Standards Completed year three (3) lower secondary school or to be completely accordingly a part of combine program III/4 and III/5 For Malaysians only Note: In case of cohorts/participants from other nationalities, approval will be sought separately and the course will be conducted on approval by Marine Department, Malaysia. On completion of the course, students will have sufficient knowledge, understanding and skill to carry out that part of duties and responsibilities proficiency required for certification of engine rating to meet standards of competence specified in section A-III/4 of the Standards of Training and Certification for Seafarers (STCW) 2010 Manila Amendment for function marine engineering at support level. 1. The aim of the course is to provide the students with the knowledge, understanding and skill necessary to prepare him/her for a certification of engine ratings engineering watch to meet the standards of competence specified in section A-III/4 of the Standards of Training and Certification for Seafarers (STCW) 2010 Manila Amendment for function marine engineering at support level. 2. Exemption from any of the modules will only be granted by Director of Marine, Marine Department, Malaysia. 3. The subject areas cover the minimum knowledge, understanding and proficiency required for certification as per ILP.HEPP.1740 JLD26(18).

34 Self Learning Practical Tutorial Lecture 31 AKADEMI LAUT MALAYSIA Function Subject 1 2 Carry out watch routine appreciates to the duties of a rating forming part of an engine room watch For keeping a boiler watch: Maintain the correct water levels and steam Operate emergency equipment and apply emergency procedures Total hours: 58 Syllabus Synopsis REEW Marine Engineering at the Support Level To produce well-trained ratings who will provide effective support to meet operational requirements of a ship with full safety. To produce well-rounded ratings with appropriate knowledge, skill, and competency together with positive attitude, respect for maritime traditions and high moral values.

35 Computed Marks Total Weightage (%) No. of Questions to Attempt No. of Questions Time (Hours) Total Marks (Obtained Marks/100) x % As instructed Minimum 4 2 hours 100 PRE-SEA MARINE ENGINEERING DEPARTMENT 32 Assessment Week Type Of Assessment Syllabus Covered Remarks Lecturer s Class Assessment After the Completion of the Course Assignments Tests Quizzes Full Syllabus NA Notes: 1. Passing criteria: i) 50% in Lecturer s Class Assessment. ii) For practical assessments, relevant assessment sheets are used to evaluate competence levels and safe working practices.

36 33 AKADEMI LAUT MALAYSIA Marks Grade Grade Point A A B B B C C C D D E 0.0 A and A- Distinction B+, B and B- Good C+, C and C- Satisfactory D+ and D Weak E Fail Grade Point Average (GPA) is the average grade point obtained by students at the end of a particular semester. GPA = Σ (credit x grade point) Σ (credit)

37 ABLE SEAFARERS ENGINE (REAS) 2018

38 35 AKADEMI LAUT MALAYSIA This course is intended for students who are/have: At least 18 years of age Normal colour vision Medically and physically fit for sea service as per Marine Department Standards Meet the requirement for the certification as a rating forming part of a watch in manned engine room or designated to perform duties in periodically unmanned engine room Has attended 6 months shipboard services as engine department rating (III/4) or seafarer with 12 months shipboard sea services as engine department rating will be exempted from program III/4 with approval by Marine Department For Malaysians only Note: In case of cohorts/participants from other nationalities, approval will be sought separately and the course will be conducted on approval by Marine Department, Malaysia.

39 PRE-SEA MARINE ENGINEERING DEPARTMENT 36 On completion of the course, students will have sufficient knowledge, understanding and skill to carry out that part of duties and responsibilities to the level of knowledge, understand and proficiency required for certification of able seafarer engine to meet standards of competence specified in section A-III/5 the Standards of Training and Certification for Seafarers (STCW) 2010 Manila Amendment for the following functions: Marine engineering at the support level Electrical, Electronic and Control Engineering at the Support Level Maintenance and Repair at the Support Level Controlling the Operation of the Ship and Care for Persons on board at the Support Level The aim of the course is to provide the students with the knowledge, understanding and skill necessary to prepare him/her for a certification of ratings as able seafarer engine to meet the standards of competence specified in section A-III/5 of the Standards of Training and Certification for Seafarers (STCW) 2010 Manila Amendment. The following are the 4 functions: Function 1 Marine engineering at the support level Function 2 Electrical, Electronic and Control Engineering at the Support Level Function 3 Maintenance and Repair at the Support Level Function 4 Controlling the Operation of the Ship and Care for Persons on board at the Support Level

40 SELF LEARNING PRACTICAL TUTORIAL LECTURE Computed Marks Total Weightage (%) No. of Questions to Attempt No. of Questions Time (Hours) Total Marks (Obtained Marks/100) x % As instructed Minimum 6 2 hours AKADEMI LAUT MALAYSIA FUNCTION SUBJECT Marine engineering at the support level Electrical, electronic and control engineering at support level Maintenance and repair at the support level Controlling the operation of the ship and care for person on board at the support level Total hours: Assessment Week Type Of Assessment Syllabus Covered Remarks Final Examination After the Completion of the Course Written Closed Book Examination Practical Full Syllabus Assessments will be based on timely completion in a safe working manner. Notes: 1. Passing criteria: i. 50% in Final Examination. ii. For practical assessments, relevant assessment sheets are used to evaluate competence levels and safe working practices.

41 PRE-SEA MARINE ENGINEERING DEPARTMENT 38 Marks Grade Grade Point A A B B B C C C D D E 0.0 A and A- Distinction B+, B and B- Good C+, C and C- Satisfactory D+ and D Weak E Fail Grade Point Average (GPA) is the average grade point obtained by students at the end of a particular semester. GPA = Σ (credit x grade point) Σ (credit)

42

43

44 This Academic Handbook belongs to Malaysian Maritime Academy Sdn. Bhd. (ALAM) Further enquiries please refer to: SECRETARY Academic Standards Committee Akademi Laut Malaysia