CLI to MIB Trap Mapping and SNMPv3 Configuration
|
|
|
- Opal Sullivan
- 6 years ago
- Views:
Transcription
1 APPENDIXD CLI to MIB Trap Mapping and SNMPv3 Configuration This appendix contains the following topics: Mapping CLI to MIB Traps Configuring Cisco IOS SNMPv3 Mapping CLI to MIB Traps The provides information about the mapping between the Command Line Interface (CLI) keywords to SNMP traps and their associated MIBs.. alarms cealarmasserted, cealarmcleared CISCO-ENTITY-ALARM-MIB atm catmintfpvcoamfailuretrap, catmintfpvcsegccoamfailuretrap, catmintfpvcendccoamfailuretrap, catmintfpvcanyoamfailuretrap, catmintfpvcoamrecovertrap, catmintfpvcsegccoamrecovertrap, catmintfpvcendccoamrecovertrap, catmintfpvcanyoamrecovertrap, catmintfpvcup2trap, catmintfpvcdowntrap, catmintfpvcsegaisrdifailuretrap, catmintfpvcendaisrdifailuretrap, catmintfpvcsegaisrdirecovertrap, catmintfpvcendaisrdirecovertrap, cncnotifysourcechange CISCO-ATM-PVCTRAP-EXTN-MIB, CISCO-ATM-NETWORK-CLOCK-MI B D-1
2 Mapping CLI to MIB Traps Appendix D bfd ciscobfdsessdown, ciscobfdsessup CISCO-IETF-BFD-MIB bgp bgpestablished, bgpbacktransition, cbgpfsmstatechange, cbgpbackwardtransition, cbgpprefixthresholdexceeded, cbgpprefixthresholdclear BGP4-MIB, CISCO-BGP-MIB bridge newroot, topologychange BRIDGE-MIB bulkstat cdcvfilecollectionerror, CISCO-DATA-COLLECTION-MIB cdcfilexfercomplete c6kxbar cc6kxbarswbusstatuschangenotif, CISCO-CAT6K-CROSSBAR-MIB cc6kxbarintbuscrcerrexcdnotif call-home ccmsmtpmsgsendfailnotif, CISCO-CALLHOME-MIB ccmsmtpserverfailnotif casa ciscocasastatechange CISCO-CASA-MIB cef cefresourcefailure, cefpeerstatechange, cefpeerfibstatechange, cefinconsistencydetection CISCO-CEF-MIB chassis chassisalarmon, chassisalarmoff CISCO-STACK-MIB config ciscoconfigmanevent, CISCO-CONFIG-MAN-MIB ccmclirunningconfigchanged config-copy cccopycompletion CISCO-CONFIG-COPY-MIB config-ctid ccmctidrolledover CISCO-CONFIG-MAN-MIB cpu cpmcpurisingthreshold, CISCO-PROCESS-MIB cpmcpufallingthreshold csg ciscocsgagentstatechange, ciscocsgquotamgrstatechange, ciscocsguserdbstatechange, ciscocsgagentlostrecordevent, ciscocsgquotamgrlostrecordevent CISCO-CSG-MIB dhcp dlsw cdhcpv4serverstarttime, cdhcpv4serverstoptime, cdhcpv4serverfreeaddresslow, cdhcpv4serverfreeaddresshigh, cdhcpv4serversubnetfreeaddresslow, cdhcpv4serversubnetfreeaddresshigh, cdhcpv4serverduplicateaddress, cdhcpv4serverifleaselimitexceeded cdetraptconnupdown, cdetrapcircuitupdown, dlswtraptconnup, dlswtraptconndown, dlswtrapcircuitup, dlswtrapcircuitdown, CISCO-IETF-DHCP-SERVER-MIB, CISCO-IETF-DHCP-SERVER-EXT-MI B DLSW-MIB, CISCO-DLSW-EXT-MIB D-2
3 Appendix D Mapping CLI to MIB Traps dot1x cpaenoguestvlannotif, CISCO-PAE-MIB cpaenoauthfailvlannotif ds1 dsx1linestatuschange DS1-MIB (RFC 1406, 2495) ds3 dsx3linestatuschange DS3-MIB (RFC 2496) eigrp ceigrpauthfailureevent, CISCO-EIGRP-MIB ceigrproutestuckinactive entity entconfigchange ENTITY-MIB (RFC 2737) envmon ciscoenvmonshutdownnotification, ciscoenvmonvoltstatuschangenotif, ciscoenvmontempstatuschangenotif, ciscoenvmonfanstatuschangenotif, ciscoenvmonsuppstatuschangenotif CISCO-ENVMON-MIB errdisable cerrdisableinterfaceeventrev1 CISCO-ERR-DISABLE-MIB ether-oam oamloopbackpingcompletiontrap, cdot3oamthresholdevent, cdot3oamnonthresholdevent CISCO-OAM-MIB, CISCO-DOT3-OAM-MIB ethernet event-manager flash cethercfmccmepup, cethercfmccmepdown, cethercfmcccrossconnect, cethercfmccloop, cethercfmccconfigerror, cethercfmxcheckmissing, cethercfmxcheckunknown, cethercfmxcheckserviceup, cevcevcstatuschangednotification, cevcevccreationnotification, cevcevcdeletionnotification ceventmgrserverevent, ceventmgrpolicyevent ciscoflashcopycompletiontrap, ciscoflashpartitioningcompletiontrap, ciscoflashmiscopcompletiontrap, ciscoflashdevicechangetrap, ciscoflashdeviceinsertednotif, ciscoflashdeviceremovednotif, ciscoflashdeviceinsertednotifrev1, ciscoflashdeviceremovednotifrev1 CISCO-ETHER-CFM-MIB, CISCO-EVC-MIB CISCO-EMBEDDED-EVENT-MGR-M IB CISCO-FLASH-MIB flex-links cflifstatuschangenotif CISCO-FLEX-LINKS-MIB flowmon cfmnotifyalarm CISCO-FLOW-MONITOR-MIB frame-relay frdlcistatuschange RFC1315-MIB (Frame Relay) fru-ctrl cefcmodulestatuschange, cefcpowerstatuschange, cefcfruinserted, cefcfruremoved, cefcunrecognizedfru, cefcfantraystatuschange CISCO-ENTITY-FRU-CONTROL-MIB D-3
4 Mapping CLI to MIB Traps Appendix D hsrp chsrpstatechange CISCO-HSRP-MIB ipmulticast ciscoipmrouteheartbeat CISCO-IPMROUTE-MIB ipsec cipscryptomapadded, cipscryptomapdeleted, cipscryptomapsetattached, cipscryptomapsetdetached, cipstoomanysas, ciketunnelstart, ciketunnelstop, cikesysfailure, cikecertcrlfailure, cikeprotocolfailure, cikenosa, cipsectunnelstart, cipsectunnelstop, cipsecsysfailure, cipsecsetupfailure, isakmp isis cipsecearlytunterm, cipsecprotocolfailure, cipsisakmppolicyadded, cipsisakmppolicydeleted cipsecnosa ciidatabaseoverload ciimanualaddressdrops ciicorruptedlspdetected ciiattempttoexceedmaxsequence ciiidlenmismatch ciimaxareaaddressesmismatch ciiownlsppurge ciisequencenumberskip ciiauthenticationtypefailure ciiauthenticationfailure ciiversionskew ciiareamismatch ciirejectedadjacency ciilsptoolargetopropagate ciioriglspbuffsizemismatch ciiprotocolssupportedmismatch ciiadjacencychange ciilsperrordetected CISCO-IPSEC-MIB, CISCO-IPSEC-FLOW-MONITOR-MIB CISCO-IPSEC-MIB CISCO-IETF-ISIS-MIB l2tun cvpdnnotifsession CISCO-VPDN-MGMT-MIB mac-notificatio n cmnmacchangednotification, cmnmacmovenotification, cmnmacthresholdexceednotif CISCO-MAC-NOTIFICATION-MIB memory cempmembuffernotify CISCO-ENHANCED-MEMPOOL-MIB D-4
5 Appendix D Mapping CLI to MIB Traps module moduleup, moduledown CISCO-STACK-MIB mpls cmplstep2mptunneldestup, cmplstep2mptunneldestdown, mplstunnelup, mplstunneldown, mplstunnelrerouted, oldmplstunnelup, oldmplstunneldown, oldmplstunnelrerouted, cmplsfrrprotected, mplsldpinitsessionthresholdexceeded, mplsldppathvectorlimitmismatch, mplsldpsessionup, mplsldpsessiondown, oldmplsldpinitsesthresholdexceeded, oldmplsldppvlmismatch, oldmplsldpsessionup, oldmplsldpsessiondown, mplsl3vpnvrfup, mplsl3vpnvrfdown, mplsl3vpnvrfroutemidthreshexceede d, mplsl3vpnvrfnumvrfroutemaxthresh Exceeded, mplsl3vpnnumvrfsecillgllblthrshexc d, mplsl3vpnnumvrfroutemaxthreshcle ared CISCO-IETF-MPLS-TE-P2MP-STD-M IB, MPLS-TE-STD-MIB, OLD-MPLS-TE-MIB CISCO-IETF-FRR-MIB, MPLS-LDP-STD-MIB (RFC 3815), OLD-MPLS-LDP-MIB, MPLS-L3VPN-STD-MIB msdp msdpestablished, MSDP-MIB msdpbackwardtransition mvpn ciscomvpnmvrfchange CISCO-MVPN-MIB netsync cisconetsyncselectedt0clock, cisconetsyncselectedt4clock, cisconetsyncinputsignalfailurestatus, cisconetsyncinputalarmstatus CISCO-NETSYNC-MIB D-5
6 Mapping CLI to MIB Traps Appendix D nhrp cnenotifnexthopregserverup, cnenotifnexthopregserverdown, cnenotifnexthopregclientup, cnenotifnexthopregclientdown, cnenotifnexthoppeerup, cnenotifnexthoppeerdown, cnenotifratelimitexceeded CISCO-NHRP-EXT-MIB ospf pim port-security cospfifconfigerror, cospfvirtifconfigerror, cospftxretransmit, cospfvirtiftxretransmit, cospforiginatelsa, cospfmaxagelsa, cospfnssatranslatorstatuschange, cospfshamlinkstatechange pimneighborloss, ciscopiminterfaceup, ciscopiminterfacedown, ciscopimrpmappingchange, ciscopiminvalidregister, ciscopiminvalidjoinprune cpssecuremacaddrviolation, cpstrunksecuremacaddrviolation, cpsifvlansecuremacaddrviolation CISCO-OSPF-TRAP-MIB PIM-MIB (RFC 2934), CISCO-PIM-MIB CISCO-PORT-SECURITY-MIB pppoe cpppoesystemsessionthresholdtrap, CISCO-PPPOE-MIB cpppoevcsessionthresholdtrap pw cpwvcup, cpwvcdown CISCO-IETF-PW-MIB rep creplinkstatus, creppreemptionstatus, crepportrolechange resource-policy ciscoermglobalpolicyviolation, ciscoermlocalpolicyviolation rf ciscorfswactnotif, ciscorfprogressionnotif, ciscorfissustatenotif, ciscorfissustatenotifrev1 CISCO-RESILIENT-ETHERNET-PRO TOCOL-MIB CISCO-ERM-MIB CISCO-RF-MIB rsvp newflow, lostflow RSVP-MIB rtr rttmonconnectionchangenotification, rttmontimeoutnotification, rttmonthresholdnotification, rttmonverifyerrornotification, rttmonlsppathdiscoverynotification, rttmonlpdgrpstatusnotification CISCO-RTTMON-MIB slb ciscoslbvirtualstatechange, ciscoslbrealstatechange CISCO-SLB-MIB D-6
7 Appendix D Configuring Cisco IOS SNMPv3 snmp sonet coldstart, warmstart, SNMPV2-MIB (RFC 1907) authenticationfailure linkdown, linkup IF-MIB (RFC 2863) ciscosonetsectionstatuschange, ciscosonetlinestatuschange, ciscosonetpathstatuschange, ciscosonetvtstatuschange CISCO-SONET-MIB storm-control cpsceventrev1 CISCO-PORT-STORM-CONTROL-MI B stpx stpxinconsistencyupdate, stpxrootinconsistencyupdate, stpxloopinconsistencyupdate CISCO-STP-EXTENSIONS-MIB syslog clogmessagegenerated CISCO-SYSLOG-MIB transceiver All sensor related traps CISCO-ENTITY-SENSOR-MIB, ENTITY-SENSOR-MIB tty tcpconnectionclos CISCO-GENERAL-TRAPS vlan-mac-limit clcvlanmaclimitnotif CISCO-L2-CONTROL-MIB vlancreate vtpvlancreated CISCO-VTP-MIB vlandelete vtpvlandeleted CISCO-VTP-MIB vrfmib cvvrfifup, cvvrfifdown, CISCO-VRF-MIB cvvnettrunkup, cvvnettrunkdown vrrp vrrptrapnewmaster, VRRP-MIB vrrptrapauthfailure, vtp vtpconfigrevnumbererror, vtpconfigdigesterror, vtpserverdisabled, vtpmtutoobig, vtpversiononedevicedetected, vlantrunkportdynamicstatuschange, vtplocalmodechanged, vtpversioninusechanged, vtpvlancreated, vtpvlandeleted, vtpvlanringnumberconflict CISCO-VTP-MIB Configuring Cisco IOS SNMPv3 Perform the following configuration tasks to enable SNMPv3 on the Cisco 7600 router: Configure SNMP-Server EngineID Configure SNMP-Server Group Names Configure SNMP-Server Users D-7
8 Configuring Cisco IOS SNMPv3 Appendix D Configure SNMP-Server EngineID To configure a name for either the local or remote SNMP engine on the router, use the following command in global configuration mode: Command snmp-server engineid [local engineid-string] [remote ip-address udp-port port-number engineid-string] Purpose Configures names for both the local and remote SNMP engine (or copy of SNMP) on the router. Configure SNMP-Server Group Names To configure a new SNMP group, or a table that maps SNMP users to SNMP views, use the following command in global configuration mode: Command snmp-server group [groupname {v1 v2c v3{auth noauth priv}}] [read readview] [write writeview] [notify notifyview] [access access-list] Purpose Configures a new SNMP group, or a table that maps SNMP users to SNMP views. The optional keyword auth specifies authentication of a packet without encrypting it and noauth specifies no authentication of a packet. Configure SNMP-Server Users To configure a new user to an SNMP group, use the following command in global configuration mode: Command snmp-server user username [groupname remote ip-address [udp-port port] {v1 v2c v3 [encrypted] [auth {md5 sha} auth-password [priv des56 priv password]] [access access-list] Purpose Configures a new user to an SNMP group. The optional keyword auth initiates an authentication level setting session with md5 and sha as the available options. Note For more information on these commands please see the Cisco IOS Network Management Command Reference at: D-8
!! Last configuration change at 16:04:19 UTC Tue Feb by zdrillin! NVRAM config last updated at 21:07:18 UTC Thu Feb ! version 12.
Last configuration change at 16:04:19 UTC Tue Feb 15 2011 by zdrillin NVRAM config last updated at 21:07:18 UTC Thu Feb 10 2011 version 12.2 no service pad service timestamps debug datetime msec service
This chapter explains Simple Network Management Protocol (SNMP) as implemented by NCS 4000.
This chapter explains Simple Network Management Protocol (SNMP) as implemented by NCS 4000. Generic IETF Traps, page 1 SNMP Traps Supported in OTN, page 2 Generic IETF Traps OTN supports the generic IETF
Table of Contents. Cisco Cisco IOS SNMP Traps Supported and How to Configure Them
Table of Contents Cisco IOS SNMP Traps Supported and How to Configure Them...1 Introduction...1 Prerequisites...1 Requirements...1 Components Used...2 Conventions...2 snmp server host Command...2 Syntax
0] Chapter 2 Cisco ME 3400E Ethernet Access Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.
![0] Chapter 2 Cisco ME 3400E Ethernet Access Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.](/thumbs/71/66077699.jpg "0] Chapter 2 Cisco ME 3400E Ethernet Access Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.")
0] Chapter 2 shutdown shutdown Use the shutdown interface configuration command to disable an interface. Use the no form of this command to restart a disabled interface. shutdown no shutdown Syntax Description
For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS Configuration Fundamentals Command Reference
CHAPTER 51 This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Catalyst 4500 series switch. Note For complete syntax and usage information for the commands used
Introduction. Overview of Cisco NCS 4206 and NCS Cisco NCS 4206
The Cisco NCS 4206 and Cisco NCS 4216 are full-featured, modular aggregation platforms designed for the cost-effective delivery of converged mobile, residential, and business services. This document provides
Monitoring Notifications
CHAPTER 4 This chapter describes the Cisco 10000 Series router notifications supported by the MIB enhancements feature introduced in Cisco IOS Release 12.2xxxx. SNMP uses notifications to report events
Configuring SNMP. Understanding SNMP CHAPTER
CHAPTER 30 This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Cisco ME 3400E Ethernet Access switch. Note For complete syntax and usage information for the commands
Introduction. Overview of Cisco NCS 4206 and NCS Cisco NCS 4206
The Cisco NCS 4206 and Cisco NCS 4216 are full-featured, modular aggregation platforms designed for the cost-effective delivery of converged mobile, residential, and business services. This document provides
2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.
![2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.](/thumbs/72/66270180.jpg "2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown. This command has no arguments or keywords.")
2V] Chapter 2 Catalyst 3560 Switch Cisco IOS Commands shutdown shutdown Use the shutdown interface configuration command to disable an interface. Use the no form of this command to restart a disabled interface.
Configuring SNMP. Understanding SNMP CHAPTER
CHAPTER 28 This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Catalyst 2960 switch. For complete syntax and usage information for the commands used in this chapter,
snmp-server enable traps through snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps through snmp-server enable traps ospf cisco-specific retransmit snmp-server enable traps, page 3 snmp-server enable traps (MPLS), page 12 snmp-server enable traps aaa_server, page
Configuring SNMP. About SNMP. SNMP Functional Overview
This chapter describes how to configure the SNMP feature on Cisco NX-OS devices. This chapter contains the following sections: About SNMP, page 1 Licensing Requirements for SNMP, page 7 Guidelines and
snmp-server enable traps ospf cisco-specific state-change through snmp-server enable traps voice poor-qov
snmp-server enable traps ospf cisco-specific state-change through snmp-server enable traps voice poor-qov snmp-server enable traps, page 2 1 snmp-server enable traps snmp-server enable traps ospf cisco-specific
Device Configuration Tasks for VNE Creation
APPENDIXA These topics describe the configuration tasks you must perform so that Prime Network can properly model and manage devices. Prime Network automatically performs a series of validation checks
Data Center Interface for Cisco HCS
This chapter presents the. Data Center Interface for HCS description, page 2 Implementation, page 3 Configure Nexus and MDS devices to send SNMP traps to Prime Central for HCS, page 3 Supported Traps,
Monitoring and Managing the Cisco MWR 2941 Router
CHAPTER 30 Monitoring and Managing the Cisco MWR 2941 Router The Cisco MWR 2941 supports a variety of network management features, including Mobile Wireless Transport Manager (MTWM), Cisco Active Network
Configuring Simple Network Management Protocol
Configuring Simple Network Management Protocol Finding Feature Information, page 1 Prerequisites for SNMP, page 1 Restrictions for SNMP, page 3 Information About SNMP, page 4 How to Configure SNMP, page
Configuring SNMP. Understanding SNMP CHAPTER
24 CHAPTER This chapter describes how to configure the the ML1000-2, ML100T-12, ML100X-8, and ML-MR-10 cards for operating with Simple Network Management Protocol (SNMP). Note For complete syntax and usage
This chapter explains Simple Network Management Protocol (SNMP) as implemented by CPT.
This chapter explains Simple Network Management Protocol () as implemented by CPT. Understanding, page 1 Understanding Components, page 2 Understanding MIB, page 4 Understanding Traps, page 7 Understanding
Configuring SNMP. Finding Feature Information. Prerequisites for SNMP
Finding Feature Information, on page 1 Prerequisites for SNMP, on page 1 Restrictions for SNMP, on page 3 Information About SNMP, on page 4 How to Configure SNMP, on page 9 Monitoring SNMP Status, on page
Configuring SNMP. Understanding SNMP CHAPTER
22 CHAPTER Configuring SNMP This chapter describes how to configure the ML-Series card for operating with Simple Network Management Protocol (SNMP). Note For complete syntax and usage information for the
Table of Contents Chapter 1 SNMP Configuration Commands
Table of Contents Table of Contents... 1-1 1.1 SNMP Configuration Commands... 1-1 1.1.1 display snmp-agent local-engineid... 1-1 1.1.2 display snmp-agent community... 1-1 1.1.3 display snmp-agent group...
Lab 7-2 Configure Campus Network Devices to support Simple Network Management Protocol (SNMPv3) INSTRUCTOR VERSION
CCNPv7.1 SWITCH Lab 7-2 Configure Campus Network Devices to support Simple Network Management Protocol (SNMPv3) INSTRUCTOR VERSION Topology Objective Background Configure an SNMP View Configure SNMP version
Configuring SNMP. Information About SNMP. SNMP Functional Overview. This chapter contains the following sections:
This chapter contains the following sections: Information About SNMP, page 1 Licensing Requirements for SNMP, page 5 Guidelines and Limitations for SNMP, page 5 Default SNMP Settings, page 6, page 6 Disabling
Operation Manual SNMP. Table of Contents
Table of Contents Table of Contents... 1-1 1.1 SNMP Overview... 1-1 1.1.1 Introduction to SNMP... 1-1 1.1.2 SNMP Versions and Supported MIB... 1-1 1.2 Configuring SNMP... 1-3 1.2.1 Setting Community Names...
SNMP Server Commands
SNMP Server Commands This chapter describes the Cisco IOS XR software commands used to configure and monitor the Simple Network Management Protocol (SNMP) for network monitoring and management. For detailed
Configuring SNMP. Send documentation comments to CHAPTER
27 CHAPTER The CLI and SNMP use common roles in all switches in the Cisco MDS 9000 Family. You can use SNMP to modify a role that was created using CLI and vice versa. Users, passwords, and roles for all
SNMP Commands CHAPTER
CHAPTER 7 This chapter contains the Cisco ONS 15540 ESP-specific SNMP commands. For the complete list of SNMP commands supported on the Cisco ONS 15540 ESP, and their descriptions, refer to Cisco IOS Configuration
Equivalencia. - Cisco vs Huawei -
Equivalencia - Cisco vs Huawei - Item Commandos Cisco Commandos Huawei 1 Configure terminal system 4 disable NONE 5 enable NONE 6 end Return 7 exit Quit 8 interface { interface-type interface-number 9
SNMP Configuration Guide
Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 2017 Cisco Systems, Inc. All rights
SNMPv3 Community MIB Support
The SNMP Version 3 Community MIB Support feature provides support for the Simple Network Management Protocol Version 3 (SNMPv3) Community MIB (SNMP-COMMUNITY-MIB) module defined in RFC 2576, Coexistence
Table of Contents. 2 MIB Configuration Commands 2-1 display mib-style 2-1 mib-style 2-1
Table of Contents 1 SNMP Configuration Commands 1-1 SNMP Configuration Commands 1-1 display snmp-agent community 1-1 display snmp-agent group 1-2 display snmp-agent local-engineid 1-3 display snmp-agent
Restrictions for SNMP use on Cisco IOS XR Software
Simple Network Management Protocol (SNMP) is an application-layer protocol that provides a message format for communication between SNMP managers and agents. SNMP provides a standardized framework and
Table of Contents. 2 MIB Style Configuration 2-1 Setting the MIB Style 2-1 Displaying and Maintaining MIB 2-1
Table of Contents 1 SNMP Configuration 1-1 SNMP Overview 1-1 SNMP Mechanism 1-1 SNMP Protocol Version 1-2 MIB Overview 1-2 SNMP Configuration 1-3 Configuring SNMP Logging 1-5 Introduction to SNMP Logging
SNMP Server Commands
SNMP Server Commands This chapter describes the Cisco IOS XR software commands used to configure and monitor the Simple Network Management Protocol (SNMP) for network monitoring and management. For detailed
Configuring SNMP. Understanding SNMP CHAPTER
22 CHAPTER This chapter describes how to configure the Simple Network Management Protocol (SNMP) on the Catalyst 3750 switch. Unless otherwise noted, the term switch refers to a standalone switch and a
Command Manual SNMP-RMON. Table of Contents
Table of Contents Table of Contents... 1-1 1.1 SNMP Configuration Commands... 1-1 1.1.1 display snmp-agent... 1-1 1.1.2 display snmp-agent community... 1-2 1.1.3 display snmp-agent group... 1-3 1.1.4 display
Cisco CRS-1 16-Slot Line Card Chassis Route Processor
Data Sheet Cisco CRS 16-Slot Line Card Chassis Route Processor B The Cisco CRS-1 Carrier Routing System is the industry s first carrier router offering continuous system operation, unprecedented service
Table of Contents 1 SNMP Configuration Commands RMON Configuration Commands 2-1
Table of Contents 1 SNMP Configuration Commands 1-1 SNMP Configuration Commands 1-1 display snmp-agent 1-1 display snmp-agent community 1-1 display snmp-agent group 1-3 display snmp-agent mib-view 1-4
Implementing IPv6 for Network Management
Implementing IPv6 for Network Management Last Updated: December 1, 2011 This document describes the concepts and commands used to manage Cisco applications over IPv6 and to implement IPv6 for network management.
Implementing IPv6 for Network Management
Implementing IPv6 for Network Management Last Updated: July 31, 2012 This document describes the concepts and commands used to manage Cisco applications over IPv6 and to implement IPv6 for network management.
Configure ASR9k TACACS with Cisco Secure ACS 5.x Server
Configure ASR9k TACACS with Cisco Secure ACS 5.x Server Contents Introduction Prerequisites Requirements Components Used Configuration Predefined Components on IOS XR Predefined User Groups Predefined
Table of Contents. 2 MIB Configuration Commands 2-1 MIB Configuration Commands 2-1 display mib-style 2-1 mib-style 2-1
Table of Contents 1 SNMP Configuration Commands 1-1 SNMP Configuration Commands 1-1 display snmp-agent community 1-1 display snmp-agent group 1-2 display snmp-agent local-engineid 1-3 display snmp-agent
MPLS Traffic Engineering (TE) MIB
MPLS Traffic Engineering (TE) MIB This document describes the Simple Network Management Protocol (SNMP) agent support in Cisco IOS for Multiprotocol Label Switching (MPLS) traffic engineering management,
MIB Specifications. Cisco Series Router MIB Categories CHAPTER
CHAPTER 3 This chapter describes each Management Information Base (MIB) on the Cisco10000Series. Each description lists any constraints on how the MIB is implemented on the router. Unless noted otherwise,
To implement LPTS features mentioned in this document you must understand the following concepts:
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
Implementing IPv6 for Network Management
Implementing IPv6 for Network Management Last Updated: August 1, 2012 This document describes the concepts and commands used to manage Cisco applications over IPv6 and to implement IPv6 for network management.
Configuring Embedded Resource Manager-MIB
The Embedded Resource Manager (ERM)-MIB feature introduces MIB support for the ERM feature. The ERM feature tracks resource usage information for every registered resource owner and resource user. The
Monitoring. Ping CHAPTER
CHAPTER 10 This chapter explains the monitoring activity. It contains the following sections: Ping, page 10-1 SLA, page 10-3 Task Manager, page 10-23 Reports, page 10-27 Ping Ping is the way Prime Provisioning
This chapter describes how to configure Simple Network Management Protocol (SNMP) to monitor the Cisco ASA.
This chapter describes how to configure Simple Network Management Protocol () to monitor the Cisco ASA. About, page 1 Guidelines for, page 4 Configure, page 6 Monitoring, page 10 History for, page 11 About
Operation Manual SNMP-RMON H3C S3610&S5510 Series Ethernet Switches. Table of Contents
Table of Contents Table of Contents... 1-1 1.1 SNMP Overview... 1-1 1.1.1 SNMP Mechanism... 1-1 1.1.2 SNMP Protocol Version... 1-2 1.1.3 MIB Overview... 1-2 1.2 SNMP Configuration... 1-2 1.3 Trap Configuration...
Setting Up Physical Inventory
CHAPTER 4 Devices Every network element that Cisco Prime Fulfillment manages must be defined as a device in the system. An element is any device from which Prime Fulfillment can collect information. In
Implementing LPTS. Prerequisites for Implementing LPTS. Information About Implementing LPTS
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
Configure SNMP. Understand SNMP. This chapter explains Simple Network Management Protocol (SNMP) as implemented by Cisco NCS 4000 series.
This chapter explains Simple Network Management Protocol (SNMP) as implemented by Cisco NCS 4000 series. Understand SNMP, page 1 Basic SNMP Components, page 2 SNMPv3 Support, page 3 SNMP Traps, page 4
Lawful Intercept Architecture
The Lawful Intercept (LI) feature supports service providers in meeting the requirements of law enforcement agencies (LEA) to provide electronic surveillance as authorized by a judicial or administrative
Excessive ARP Punt Protection was supported.
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers
Data Sheet Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers Cisco IOS Software is always evolving to provide you with more features of higher quality. Cisco IOS XE Software releases
Configurations. Express Setup. Stratix 8000 APPENDIX
APPENDIX D Express Setup Stratix 8000 The following is a sample of a Stratix 8000 configuration after running Express Setup. The Stratix 8000 was running Release 3 (IOS version 12.2(50)SE2). version 12.2
COMMAND LINE CHEAT SHEET
BASIC show show show display exit exit / up exit quit run run - - end exit exit all return include match match include formal display-set - - reload request system reboot admin reboot now reboot GENERAL
Cisco CRS-1 16-Slot Single-Shelf System
Cisco CRS-1 16-Slot Single-Shelf System The Cisco CRS-1 Carrier Routing System is the industry s first carrier router offering continuous system operation, unprecedented service flexibility, and system
About the HP MSR Router Series
About the HP MSR Router Series Command (V7) Part number: 5998-7731b Software version: CMW710-R0304 Document version: 6PW104-20150914 Legal and notice information Copyright 2015 Hewlett-Packard Development
Table of Contents. 2 MIB Style Configuration 2-1 Overview 2-1 Setting the MIB Style 2-1 Displaying and Maintaining MIB 2-1
Table of Contents 1 SNMP Configuration 1-1 SNMP Overview 1-1 SNMP Mechanism 1-1 SNMP Protocol Versions 1-2 MIB Overview 1-2 Configuring SNMP 1-3 Configuring SNMPv3 1-3 Configuring SNMPv1 and SNMPv2c 1-4
MPLS VPN MIB Support. Cisco IOS Release 12.0(24)S1 1
MPLS VPN MIB Support This document describes the Simple Network Management Protocol (SNMP) agent support in Cisco IOS for Multiprotocol Label Switching (MPLS) Virtual Private Network (VPN) management,
Platform Settings for Firepower Threat Defense
Platform settings for devices configure a range of unrelated features whose values you might want to share among several devices. Even if you want different settings per device, you must create a shared
CONFIGURE MAC NOTIFICATION TRAPS ON CISCO SWITCHES
HOW-TO CONFIGURE MAC NOTIFICATION TRAPS ON CISCO SWITCHES Applicable Versions: FortiNAC 8 03/15/2018 Rev: D 2018 Fortinet 1 of 7 Contents Overview... 3 Introduction... 3 Requirements... 3 Procedure...
Monitoring the Security Appliance
CHAPTER 42 This chapter describes how to monitor the security appliance, and includes the following sections: Using SNMP, page 42-1 Configuring and Managing Logs, page 42-5 Using SNMP This section describes
Cisco Router Configuration Handbook
Cisco Router Configuration Handbook Second Edition Dave Hucaby, CCIE No. 4594 Steve McQuerry, CCIE No. 6108 Andrew Whitaker Cisco Press 800 East 96th Street Indianapolis, IN 46240 IX Contents Introduction
SNMP Simple Network Management Protocol
SNMP Simple Network Management Protocol Simple Network Management Protocol SNMP is a framework that provides facilities for managing and monitoring network resources on the Internet. Components of SNMP:
Cisco NCS 4000 Series MIB Specifications Guide
Cisco NCS 4000 Series MIB Specifications Guide Cisco IOS XR Software Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800
HPE FlexNetwork MSR Router Series
HPE FlexNetwork MSR Router Series About the HPE MSR Router Series Command s Part number: 5998-8799 Software version: CMW710-R0305 Document version: 6PW106-20160308 Copyright 2016 Hewlett Packard Enterprise
HPE FlexNetwork MSR Router Series
HPE FlexNetwork MSR Router Series About the HPE MSR Router Series Configuration Part number: 5998-8821 Software version: CMW710-R0305 Document version: 6PW106-20160308 Copyright 2016 Hewlett Packard Enterprise
ML-Series Card Overview
CHAPTER 1 This chapter provides an overview of the ML1000-2 and ML100T-12 cards for the ONS 15454 (SONET) and ONS 15454 SDH. It lists Ethernet and SONET/SDH capabilities and Cisco IOS and Cisco Transport
Configuring VRF-lite CHAPTER
CHAPTER 36 Virtual Private Networks (VPNs) provide a secure way for customers to share bandwidth over an ISP backbone network. A VPN is a collection of sites sharing a common routing table. A customer
NSC , Cisco Systems, Inc. All rights reserved. 1
Understanding Fault Management Session Do You Know What Went Wrong? Did a router fail? Did several routers fail? Was there a fiber cut? Did the path to the network management station fail? A Few Things
Network Management Commands
Network Management Commands ip wccp, page 3 monitor capture (interface/control plane), page 5 monitor capture buffer, page 9 monitor capture clear, page 10 monitor capture export, page 11 monitor capture
INDEX AR HR IR MCR MNR MPR NFR QR RR SMR SR VPR
INDEX AR HR IR MCR MNR MPR NFR QR RR SMR SR VPR A Cisco IOS XR Advanced System Command Reference Cisco IOS XR Interface and Hardware Component Command Reference Cisco IOS XR IP Addresses and Services Command
Cisco CRS-3 8-Slot Single-Shelf System
Cisco CRS-3 8-Slot Single-Shelf System The Cisco CRS-3 Carrier Routing System offers industry-leading performance, advanced services intelligence, environmentally conscious design, and system longevity.
Cisco IOS XR Software Release for Cisco CRS-1 Routers and Cisco XR Series Routers
. Cisco IOS XR Software Release 3.8.0 for Cisco CRS-1 Routers and Cisco XR 12000 Series Routers No. 534342 Product Overview Cisco IOS XR Software Release 3.8.0 provides additional core routing features
Cisco Series Performance Routing Engine 4
Cisco 10000 Series Performance Routing Engine 4 The Cisco 10000 Series Performance Routing Engine 4 (PRE4) (Figure 1) addresses the demand for increased performance, scalability, and hierarchical quality
Physical Topology. Logical Topology
Physical Topology Logical Topology Please, note that the configurations given below can certainly be clean-up and tuned. Some commands are still embedded for testing purposes. Note also that the text highlighted
Cisco Catalyst Switch Module 3110 for IBM BladeCenter
Cisco Catalyst Switch Module 3110 for IBM BladeCenter The Cisco Catalyst Switch Module 3110 for IBM BladeCenter represents the next-generation networking solution for blade server environments. Built from
HPE FlexFabric 5950 Switch Series
HPE FlexFabric 5950 Switch Series About the HPE FlexFabric 5950 Configuration Guides Part number: 5200-0808 Software version: Release 6106 and later Document version: 6W100-20160513 Copyright 2016 Hewlett
MPLS applications can be upgraded using the In Service Software Upgrade (ISSU) process. Thus, MPLS
MPLS applications can be upgraded using the In Service Software Upgrade (ISSU) process. Thus, MPLS applications are considered ISSU s MPLS clients. The ISSU process allows Cisco IOS XE software to be updated
MPLS VPN ID. Feature Overview. This feature was introduced. Support for this feature was integrated into Cisco IOS Release 12.2(4)B.
MPLS VPN ID Feature History Release 12.0(17)ST 12.2(4)B Modification This feature was introduced. Support for this feature was integrated into. This document describes the MPLS VPN ID feature in and includes
CPU Thresholding Notification
CPU Thresholding Notification Last Updated: October 10, 2011 The CPU Thresholding Notification feature notifies users when a predefined threshold of CPU usage is crossed by generating a Simple Network
FiberstoreOS. Network Management Configuration Guide
FiberstoreOS Network Management Configuration Guide Contents 1 Configuring Network Diagnosis...6 1.1 Overview... 6 1.2 Configurations...7 1.3 Validation... 7 2 Configuring NTP... 9 2.1 Overview... 9 2.2
Cisco IOS XE Software for Cisco ASR 920 Series Aggregation Services Routers
Data Sheet Cisco IOS XE Software for Cisco ASR 920 Series Aggregation Services Routers Cisco IOS Software is continuously evolving to provide you with the features of higher quality. Cisco IOS Software
Using MIBs. Managing Router Physical Entities APPENDIXA
APPENDIXA This chapter describes how to perform tasks on the Cisco 7200 Router. Managing Router Physical Entities, page A-1 Mapping Information for ENTITY-MIB, page A-2 Generating SNMP Traps, page A-10
DES-3010F / DES-3010G / DES-3018 / DES-3026
DES-3010F / DES-3010G / DES-3018 / DES-3026 Managed 8/16/24-port 10/100Mbps N-Way Fast Ethernet Switch Command Line Interface Reference Manual First Edition (May 2005) 651ES3026015 Printed In Taiwan RECYCLABLE
Bidirectional Forwarding Detection (BFD) NANOG 39
An Introduction to Bidirectional Forwarding Detection (BFD) NANOG 39 Aamer Akhter / aa@cisco.com ECMD, cisco Systems 1 Why BFD? Methods needed to quickly determine forwarding failure Not everything is
Appendix B - Trap Entries
Appendix B - Trap Entries The following table lists all possible trap log entries and their corresponding meanings that will appear in the switch. 802.1X ddot1xextloggedsuccess The trap is sent when a
2.2 Cisco IOS Commands for the Catalyst 4500 Series Switches snmp ifindex clear. This command has no arguments or keywords.
Chapter 2 2.2 snmp ifindex clear snmp ifindex clear To clear any previously configured snmp ifindex commands that were entered for a specific interface, use the snmp ifindex clear command. snmp ifindex
Viewing Network Element Properties
CHAPTER 3 The following topics describe the user access roles required to use Cisco Prime Network Vision (Prime Network Vision) and how to view network element physical and logical properties in any mapped
Cisco Service Control MIBs
APPENDIXA Cisco Service Control MIBs The SCE platform originally supported the standard MIB-II and a proprietary Service Control Enterprise MIB. The proprietary pcube MIB enabled the external management
Introduction to Multi-Protocol Label
Introduction to Multi-Protocol Label Switching (MPLS) Matthew Bocci, Alcatel-Lucent IP Division Agenda History of MPLS Standardisation MPLS Architecture Control Plane QoS and Traffic Engineering Protection
Cisco Embedded Service 2020 Series Switches
Data Sheet Cisco Embedded Service 2020 Series Switches The Cisco Embedded Service 2020 Series Switches are optimized for mobile and embedded networks that require switching capability in harsh environments.
Cisco EtherSwitch 4- and 9-Port High-Speed WAN Interface Cards Datasheet
Cisco EtherSwitch 4- and 9-Port High-Speed WAN Interface Cards Datasheet CONTENT Overview... 2 Appearance... 2 Key Features and Benefits... 3 Product Specifications... 6 Basic Ordering Information... 11
CISCO EXAM QUESTIONS & ANSWERS
CISCO 300-206 EXAM QUESTIONS & ANSWERS Number: 300-206 Passing Score: 800 Time Limit: 120 min File Version: 35.2 http://www.gratisexam.com/ Exam Code: 300-206 Exam Name: Implementing Cisco Edge Network
CISCO EXAM QUESTIONS & ANSWERS
CISCO 300-206 EXAM QUESTIONS & ANSWERS Number: 300-206 Passing Score: 800 Time Limit: 120 min File Version: 35.2 http://www.gratisexam.com/ Exam Code: 300-206 Exam Name: Implementing Cisco Edge Network