Career Program Outcomes Assessment Report. Prepared by the MCC Career Education Department,

Size: px
Start display at page:

Download "Career Program Outcomes Assessment Report. Prepared by the MCC Career Education Department,"

Transcription

1 Career Program Outcomes Assessment Report Prepared by the MCC Career Education Department, October 2014

2 Introduction The Missouri Department of Elementary and Secondary Education requires that completers of career programs take a Technical Skills Assessment, wherever such an assessment is available and appropriate. The assessment should be industry-recognized. Many, but not all, of the MCC career programs have a TSA. Beginning with the school year, all programs are also expected to assess at least one program outcome, report the results, and identify any needed interventions or follow-up actions. The information summarized here was collected as part of the program review process and refers to assessment activities conducted during the school year. Apparel and Textiles APTX is evaluated through the APTX 275 Portfolio class. In this class, a panel of judges who work in various facets of the industry interview graduating students and evaluate their portfolios. The rubric and procedure has been approved by DESE as a TSA. There was one program completer in spring 2013, and she passed. No actions are currently planned based on this result. Automotive Automotive TSA results (NA3SA exams) for MCC-Longview Automotive are in the 80th percentile nationwide with a 96% pass rate (178 passed out of 185 taken). Twenty-two of the twenty-three students who took exams passed over 65% of them. Only four failed even one of the exams. There is a suggestion to do pre and post-testing, however that would increase the cost from approximately $700 to $4,000. The program is in the process of looking at the lowest scoring area (Steering and Suspension) and plans to determine action steps to improve this area. The faculty is also looking at individual task areas to increase student learning. In addition, the AUTO program assessed the following program outcome: Students will demonstrate the knowledge of thorough application of safety rules and regulations. The written exam used to assess this outcome is an online product through CCAR, and it is an industry standard. The name of the product is SP2 (Safety and Pollution Prevention). One hundred and forty seven students took the assessment during Fall 2013 and Spring 2014 (the certificate is good for one year). One hundred percent passed the assessment. All instructors will continue to cover safety as it relates to the specific area that is being learned in the class and laboratory for that specific course section. Business The business program uses A*S*K Business Fundamentals as the TSA for Management, and National Occupational Competency Testing Institute (NOCTI) products for student TSAs in the other areas: Advanced Accounting for the Accounting emphasis, and administrative assisting for the office management emphasis. Fifteen of the seventeen (88%) taking the A*S*K exam passed. Nine of twelve

3 (75%) passed the accounting exam. Both students taking the administrative assisting exam passed, but the program is being discontinued for other reasons. For , the business program participated in the general education assessment project instead of assessing a CTE program outcome. They identified discipline outcomes for the transfer program, assessed one of them, and then also assessed critical thinking using an accounting cycle project. Child Growth and Development Students exiting the program are required to take the NOCTI (National Occupation Competency Testing Institute) test for Early Childhood Education and Care. The overall scores and scores from all areas but one were below the national average for spring Eight out of the 11 students passed the exam. Since that time, a new program coordinator has been hired who will also serve as faculty. Revision of the curriculum is being planned. Computer Science - Cisco The Cisco Exam serves as the TSA, and is required for all students taking CSIS 290 as their capstone class. The program has taken steps to improve the scores on the TSAs. It is suspected that many low scores were due to the new version of the industry certification, since students were completing the curriculum geared toward the prior certification. To aid students who fell under the older curriculum we provided access to bridging material. The following steps were taken: 1) Updated curriculum and sent changes through MCC s curriculum process. 2) Provided access to bridging material for students who completed prior curriculum. 3) Required practice certifications for students in CSIS 113 and CSIS 213. In addition, the program assessed the following performance indicators in : Uses internetworking operating system software for router and switch configuration to control the flow of information through a network. Troubleshoots and repairs problems with information flow through a network. The assessment used was the CSIS 213 Accessing the WAN practical final. 85% of the students adequately achieved the skills measured in the program outcome. This is a 6% decline from FY13. The program will implement a newly updated skills based assessment along with newly updated curriculum for FY15. Computer Science and Information Systems Web Technologies The CIW certifications are used as the Web Technologies TSA. In fall 2013, five students took the exam. One of three areas assessed reported majority of students not successfully passing (Site Development Associate). More course time and emphasis has been placed on the Site Development Associate materials. Spring 2014 had one student who took and passed this part (and both others) of the assessment.

4 The program outcome assessed was: Demonstrate professional oral and written communication skills. A project-based assessment (administered via SAM) and common comprehensive final were given to selected sections of CSIS students beginning Fall Nearly half of the 147 students who took the skillbased exam scored 96 or higher, and 120 of them 76 or higher. Although results were not particularly low, the program has made significant changes to introductory curriculum in CSIS 110 and CSIS 115. Dental Assisting The national board exam serves as the TSA, and it has three parts: radiology, infection control, and chair-side assisting. Fall 2013 scores were as follows: ICE (Out of 17 students in Fall, 2 failed, none retook due to financial constraints, ICE 88% Pass) and RHS Exams (Out of 17 students in Fall, 5 failed, 2 retook and Passed, RHS 82.3% Pass) In response the program has provided board prep software for students from learning express. Mock National Board Exams were also offered to our students twice in fall and spring prior to their actual board dates. Emergency/Paramedic The national registry exam serves as the TSA for this program. It is anticipated that a practical skills section will be added to the exam for The program is adding practical skills lab courses to help with student preparation. Engineering Technology This program has no TSA available. The ADDA exam is a possibility for CADD but involves considerable expense to become an ADDA testing center. The program outcome assessed is: Produce a completely dimensioned and annotated orthographic construction document from a three-dimensional representation of an object. This document should be produced to a standard scale and to an established set of CADD and drafting standards using an industry standard CADD software package. The results were good and no changes are planned this year based on the results. Graphic Design A portfolio assessment scored by local industry representatives serves as the TSA. Twenty of twenty-two students completing a portfolio (91%) were given a passing score by a panel of employers. The results will be discussed by the faculty. Health Information Technology The RHIT exam serves as the TSA for this program. To date graduates have successfully passed the national certification exam with scores above the national average. The 2014 graduating class was required to purchase a competency review text book that was bundled with the cost of the national exam. This will require the students to sit for the national certification exam within 4 months after

5 graduation (majority of the students will be sitting for the exam in August 2014) or $300 will be forfeited. Also, an RHIT competency course was incorporated into curriculum for spring The program analyzes scores on the RHIT credentialing exam, comparing MCC-PV scores to national scores as well as doing item and category analysis to determine if there are weak areas that need to be addressed. Additionally the curriculum is analyzed annually to determine if updates or changes should be made. No program outcomes were assessed formally this past year, because due to curriculum revision the program outcomes had to be revised. Courses were also restructured with new texts to meet the deliverables. Outcomes were reviewed at the April 29, 2014 Advisory Board meeting. Heating and Air-conditioning ICE was administered on a limited scope for the first time in the program. The results were below expectations. The textbook used in the core classes of the program will be updated to better cover required material. The program will also make the latest troubleshooting software simulations available to instructors to better prepare students for the TSA. The program outcome assessed was: The program will graduate individuals who exhibit competence with entry-level skills in the heating, ventilation, and air conditioning profession. It was assessed through the TSA. Law Enforcement The Law Enforcement (Police Academy) program uses the Peace Officers Standards and Training (POST) exam, which is the licensure required for employment in Missouri. In the past year, 37 graduates took the exam and all 37 (100%) passed. No immediate program changes are planned based on these results. Occupational Therapy Assistant The program TSA is the national board exam from NBCOT. Thirteen of the fourteen students who took it in spring 2014 passed the first time. Current course content, schedule, clinical assignments and instructional methodology appear to be successfully supporting student success. Paralegal There is no standard national test available as a TSA for the program. The capstone Internship class is the primary assessment tool. The program outcome assessed was: Perform in a professional and ethical manner as a working paralegal and a productive member of the legal team. All students have passed for the last two years, and no major changes required. Physical Therapy Assistant The program uses the national boards from NPTE as a TSA. Results have historically been excellent (nearly always 100% first-time pass rate). This continued for with 34 out of 34 (100%) students

6 passing the licensure examination. The program has continued earlier implemented changes including requiring students to enroll in an online score builder course during clinical rotations, requiring students maintain a portfolio of old quizzes and exams for study purposes, and a comprehensive internal end-ofprogram exam required for all. Practical Nursing The NCLEX national exam is used as the TSA. The Practical Nursing Program improved student performance on TSAs by increasing live clinical simulation and using more ATI practice examinations. A curriculum alignment with ATI has been completed. Data from ATI exams revealed areas within the curriculum needing improvement, and faculty worked on alignment and quality of delivery. An NCLEX review has been added to the end of the program to review content and provide test taking strategies to increase the student s. The program outcome assessed is: Applies the nursing process for basic nursing care to healthy or ill clients across the lifespan. It was assessed by the ATI Comprehensive Predictor, which evaluates the student s knowledge base and also estimates probability of passing the NCLEX exam. The Comprehensive Predictor showed 15 students with a 95% likelihood of passing, and provided recommendations for areas to review. As a result of the recommendations, 25 students passed the exam on their first attempt. Skills learned in the first semester will now be integrated throughout the entire program. Radiological Technology The program uses the national registry exam from ARRT as its TSA. All eighteen students who took the exam this year passed. Last year s pass rate was also 100%. The program will continue to make updates to curriculum to remain aligned with national standards. Registered Nursing The RN/ADN program uses the NCLEX exam as its TSA. The pass rate for Spring 2013 graduates was 90.3% with 52 students taking the exam. For the 72 December 2013 graduates who took it, 90.3% passed. Thirteen May 2014 completers have taken the exam so far, with a 92.3% pass rate. The program plans to increase simulation time in areas where clinical sites are difficult to find. The accreditors are also encouraging reduction of pre-requisites. Surgical Technology The national certification exam (CST) is used as a program TSA. 15 out of 16 students tested (94%) passed the exam this year. This success rate is a huge improvement over the previous year s pass rate of 60%, and may at least partially be attributed to changes made based on last year s assessment work. Veterinary Technology

7 The program uses the national exam as its TSA but does not have access to scores by student. There were eighteen students who took the licensure exam this year, and all 18 passed. The program outcome assessed was: Obtain national certification and was based on NTVE results. The program is updating curriculum in three courses to reflect current industry standards. The coordinator will also seek advisory board approval to change the program prerequisites. Students have had to finish general education courses after the technical coursework was finished, and had to wait until November rather than July to take the VTNE. The change should improve the students chances of completing their degree when the program is finished, and improve exam performance. Welding The AWS SENSE Modular exams are used as the TSA. The faculty is investigating the effectiveness of the material that augments the lectures. Modifications have been made to the materials used to augment lectures for the academic year. The program outcome assessed was: The program will graduate individuals that meet or exceed the American Welding Society s guidelines for entry-level employees in welding technology. It was assessed using the indicator: Demonstrate ability to apply welding, cutting, and print reading skills to layout and fabrication. The results were good, but the rubric will be modified to simplify the points being addressed, enabling better analysis of results.

Program Student Learning Outcomes (Fall 2014)

Program Student Learning Outcomes (Fall 2014) Program Student Learning Outcomes (Fall 2014) Program SLOs for all Sacramento City College (SCC) Degree and Certificate programs can be found in the SCC Catalog. The results of assessment are reported

More information

Assessment Tool Benchmark Time Frame Person/Group Analysis Assessment Method Responsible

Assessment Tool Benchmark Time Frame Person/Group Analysis Assessment Method Responsible Southern Illinois University Carbondale College of Applied Sciences and Arts School of Allied Health Radiation Therapy Program Assessment Plan 14 Analysis and Actions Based on the 2012/2013 Radiation Therapy

More information

THE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION

THE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION THE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION Welding Industry Careers Welder Materials Engineer Welding Engineer Robotics Technician Welding Technician Business Owner

More information

GREAT PLAINS TECHNOLOGY CENTER COURSE OF STUDY. Adult Students: 1050 Hours

GREAT PLAINS TECHNOLOGY CENTER COURSE OF STUDY. Adult Students: 1050 Hours GREAT PLAINS TECHNOLOGY CENTER COURSE OF STUDY Career Cluster: Career Pathway: Career Major: Career Major Hours: Information Technology (IT) Information Support and Services (IT002) Desktop Support Technician

More information

Check with your counselor for any school-specific program prerequisites Open to both Juniors and Seniors

Check with your counselor for any school-specific program prerequisites Open to both Juniors and Seniors Course Description: This program introduces students to the skills needed to inspect, maintain, and repair automobiles and light trucks with internal combustion engines. Instructional units include: Automotive

More information

Medical Laboratory Technology Assessment Summary for Due: October 15, 2005

Medical Laboratory Technology Assessment Summary for Due: October 15, 2005 Medical Laboratory Technology Assessment Summary for 2004-2005 Due: October 15, 2005 A. Mission Statement: It is the mission of the Medical Laboratory Technology Department to facilitate student learning

More information

Frame for Evaluation. Spring Semester

Frame for Evaluation. Spring Semester Southern Illinois University Carbondale College of Applied Sciences and Arts School of Allied Health Medical Dosimetry Program Assessment Plan Spring 2017 Analysis and Actions MISSION: The mission of the

More information

Annual Program Assessment Review

Annual Program Assessment Review Mitchell Technical Institute Annual Program Assessment Review Department Head: Jen Schumacher Program: Date: 1/5/2017 Information Systems Tech... As a department, please review the following direct and

More information

HOUSTON COMMUNITY COLLEGE SOUTHWEST. Local Area Networks Design and Protocol Cisco 1 ITCC 1002

HOUSTON COMMUNITY COLLEGE SOUTHWEST. Local Area Networks Design and Protocol Cisco 1 ITCC 1002 HOUSTON COMMUNITY COLLEGE SOUTHWEST Local Area Networks Design and Protocol Cisco 1 ITCC 1002 Date and Time of class: Class CRN Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST

More information

Health Education Community Health Education

Health Education Community Health Education + Master of Science Program Health Education Community Health Education CECH 2014 Primary Faculty: Keith King, PhD, MCHES 513-556-3859 keith.king@uc.edu I. Program Overview The Master of Science (MS) in

More information

Discipline Review for Maple Woods

Discipline Review for Maple Woods Section I: Student Demographics Gender Fall 7 Fall 8 Fall Fall Fall Female 3 % 8 7 5% 7 5% 3 % Male 8 7 37% 3 % 7 35% 77 3% 8 88 5 7 Ethnicity Am. Indian % % % % % Asian 8 % % % 3 5% 5 % Black 3 % 5 5%

More information

HOUSTON COMMUNITY COLLEGE SOUTHWEST. CCNP 4 Network Troubleshooting ITCC 2044

HOUSTON COMMUNITY COLLEGE SOUTHWEST. CCNP 4 Network Troubleshooting ITCC 2044 HOUSTON COMMUNITY COLLEGE SOUTHWEST CCNP 4 Network Troubleshooting ITCC 2044 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST - COURSE

More information

Discipline Review. Art. Fall 2007 Fall 2008 Fall 2009 Fall 2010 Fall Section I: Student Demographics Gender. Ethnicity. Age. Page 1-1.

Discipline Review. Art. Fall 2007 Fall 2008 Fall 2009 Fall 2010 Fall Section I: Student Demographics Gender. Ethnicity. Age. Page 1-1. Section I: Student Demographics Gender Discipline Review Fall 27 Fall 28 Fall 29 Fall 2 Fall 2 Female 627 62% 69 65% 684 62% 733 64% 645 62% Male 389 38% 333 35% 43 38% 42 36% 394 38%,6 952,97,53,39 Ethnicity

More information

Academic Program Plan for Assessment of Student Learning Outcomes The University of New Mexico

Academic Program Plan for Assessment of Student Learning Outcomes The University of New Mexico Academic Program Plan for Assessment of Student Learning Outcomes The Mexico A. College, Department and Date 1. College: School of Engineering 2. Department: Department of Civil Engineering 3. Date: February

More information

IT Essentials PC Hardware and Software Grades 11-12

IT Essentials PC Hardware and Software Grades 11-12 IT Essentials PC Hardware and Software Grades 11-12 Units of Credit: One Semester (Elective) Prerequisites: None Course Description: IT Essentials: PC Hardware and Software is a hands-on, career-oriented

More information

Oklahoma State University Institute of Technology Online Common Syllabus Fall 2018

Oklahoma State University Institute of Technology Online Common Syllabus Fall 2018 Oklahoma State University Institute of Technology Online Common Syllabus Fall 2018 ITD 1213 Hardware Systems Support Focuses on the management and maintenance of hardware and operating system environments.

More information

PROGRAM SYSTEMATIC EVALUATION PLAN_

PROGRAM SYSTEMATIC EVALUATION PLAN_ IU East Baccalaureate Program Learning Outcomes 6.1- The program demonstrates evidence of students achievement of each end-of-program student-learning outcome.. PROGRAM SYSTEMATIC EVALUATION PLAN_2016-2017

More information

Discipline Review for Blue River

Discipline Review for Blue River Section I: Student Demographics Gender Discipline Review for Blue River Fall 7 Fall 8 Fall 9 Fall Fall Female 63% 3 4 9% 64 4% 38 Male 46 37% 39% 69 4% 3 4 96 39% 397 386 49 487 4 Ethnicity Am. Indian

More information

Nuts and Bolts of the Career and Professional Education Act (CAPE)

Nuts and Bolts of the Career and Professional Education Act (CAPE) Learning Today, Earning Tomorrow Nuts and Bolts of the Career and Professional Education Act (CAPE) Tara Goodman Tara McLarnon Division of Career and Adult Education Florida Department of Education 1 The

More information

QUALITY IMPROVEMENT PLAN (QIP) FOR THE CONSTRUCTION MANAGEMENT DEGREE PROGRAM

QUALITY IMPROVEMENT PLAN (QIP) FOR THE CONSTRUCTION MANAGEMENT DEGREE PROGRAM DEPARTMENT OF CONSTRUCTION MANAGEMENT AND CIVIL AND CONSTRUCTION ENGINEERING QUALITY IMPROVEMENT PLAN (QIP) FOR THE CONSTRUCTION MANAGEMENT DEGREE PROGRAM Updated 5/17 Organization The QIP consists of

More information

Teacher Education: Reading Certificate, Reading Language Arts Certificate

Teacher Education: Reading Certificate, Reading Language Arts Certificate Teacher Education: Reading Certificate, Reading Language Arts Certificate College of Education California State University, Sacramento 49 Commission on Teacher Credentialing Biennial Report Academic Years

More information

COMPUTER INFORMATION SYSTEMS. Five Year INSTITUTIONAL REVIEW. By David McNair. May 15, 2009

COMPUTER INFORMATION SYSTEMS. Five Year INSTITUTIONAL REVIEW. By David McNair. May 15, 2009 COMPUTER INFORMATION SYSTEMS Five Year INSTITUTIONAL REVIEW By David McNair May 15, 2009 Dr. Mary Beth Ottinger Acting Dean Career and Technical Education Institutional Effectiveness Review The purpose

More information

Pilot Testing Information

Pilot Testing Information 500 North Bronson Avenue Big Rapids, MI 49307 800.334.6283 www.nocti.org Pilot Testing Information NOCTI is seeking sites to pilot test our newly developed/revised assessments. Pilot testing is a critical

More information

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS HPC INTERNETWORKING & GRID TECHNOLOGY HPC 1020

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS HPC INTERNETWORKING & GRID TECHNOLOGY HPC 1020 PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS HPC INTERNETWORKING & GRID TECHNOLOGY HPC 1020 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Spring 03 NOTE: This course

More information

Carpentry. Program Name. Program CIP Code

Carpentry. Program Name. Program CIP Code Program Name Program CIP Code 46.0400.30 Program Description and Coherent Sequence The program is designed to prepare individuals to apply technical knowledge and skills in the building industry which

More information

Pathway Assessment Blueprint

Pathway Assessment Blueprint Pathway Assessment Blueprint Information Support and Services Test Code: 1131/ Version: 01 Copyright 2011. All Rights Reserved. General Assessment Information General Assessment Information Written Assessment

More information

BETHESDA CHEVY CHASE HIGH SCHOOL Career and Technology Education Department

BETHESDA CHEVY CHASE HIGH SCHOOL Career and Technology Education Department BETHESDA CHEVY CHASE HIGH SCHOOL Career and Technology Education Department Mr. Jonathan Nateghi-Asli Jonathan_A_Nateghi-Asli@mcpsmd.org Resource Teacher http://bit.ly/bcctechnology Graduation Requirements

More information

Discipline Review for Penn Valley

Discipline Review for Penn Valley Section I: Student Demographics Gender Discipline Review for Penn Valley Fall 27 Fall 28 Fall 29 Fall 2 Fall 2 Female 8 67% 758 63% 788 6% 937 62% 97 62% Male 47 33% 443 37% 58 39% 573 38% 6 38%,27,2,296,5,57

More information

Certificate Program in Project Management

Certificate Program in Project Management Certificate Program in Project Project Industry set to grow by $6.6 trillion by 2020 PMI s 2013 Talent Gap Report 41.5 million jobs in Project by 2020 PMIs 2015 Talent Gap Report PMP Certified Professional

More information

[GREEN JOB PROGRAMS AT CLC]

[GREEN JOB PROGRAMS AT CLC] Engineering, Math and Physical Architectural Technology Civil & Environmental Technology Construction Management Technology Plan 24CB Plan 24CF Plan 24VA Plan 24BA Plan 24BF 62 Part of program 34 Part

More information

Information Technology Applications Development Option Assessment Report

Information Technology Applications Development Option Assessment Report Information Technology Applications Development Option Assessment Report 2012-2013 I. Program History History The Information Technology degree was first offered at OIT in 1999. In addition, the Management

More information

CURRICULUM COMMITTEE MEETING Friday, March 18, :00 p.m. Student Life Center, Faculty Dining Room (Building 23, First Floor) AGENDA

CURRICULUM COMMITTEE MEETING Friday, March 18, :00 p.m. Student Life Center, Faculty Dining Room (Building 23, First Floor) AGENDA CURRICULUM COMMITTEE MEETING Friday, March 18, 2016-2:00 p.m. Student Life Center, Faculty Dining Room (Building 23, First Floor) I. Call to Order AGENDA II. Roll Call III. Minutes of meeting of January

More information

Recent Developments in Career and Technical Education. New York State Education Department November 2016

Recent Developments in Career and Technical Education. New York State Education Department November 2016 Recent Developments in Career and Technical Education New York State Education Department November 2016 Topics Graduation Pathways- CTE and CDOS CTE Teacher Certification CTE and ESSA Graduation Pathways

More information

BETHESDA CHEVY CHASE HIGH SCHOOL Career and Technology Education Department

BETHESDA CHEVY CHASE HIGH SCHOOL Career and Technology Education Department BETHESDA CHEVY CHASE HIGH SCHOOL Career and Technology Education Department Mr. Jonathan Nateghi-Asli Jonathan_A_Nateghi-Asli@mcpsmd.org Resource Teacher http://bit.ly/bcctechnology Graduation Requirements

More information

Students must complete all courses with a 70% (C-) or better to complete the program.

Students must complete all courses with a 70% (C-) or better to complete the program. CAD Technology Certificate Program Program Description 222 Clock Hours of Instruction Program Completion Time 9 Months Upon Completion VDCI Professional Technology Certificate Awarded COMPUTER-AIDED DESIGN

More information

Health Information Management Assessment Report Academic Year

Health Information Management Assessment Report Academic Year Health Information Assessment Report Academic Year 2015-2016 Program Director Leslie L. Gordon, MS, RHIA, FAHIMA Associate Professor Assistant Director of Academic Affairs llgordon@alaska.edu http://www.uas.alaska.edu/sitka/programs/him/index.html

More information

Washtenaw Community College Comprehensive Report. CNT 216 Routing and Switching Essentials Effective Term: Fall 2018

Washtenaw Community College Comprehensive Report. CNT 216 Routing and Switching Essentials Effective Term: Fall 2018 1 of 5 3/7/2018, 3:03 PM Washtenaw Community College Comprehensive Report CNT 216 Routing and Switching Essentials Effective Term: Fall 2018 Course Cover Division: Business and Computer Technologies Department:

More information

Title Core TIs Optional TIs Core Labs Optional Labs. All None 1.1.6, 1.1.7, and Network Math All None None 1.2.5, 1.2.6, and 1.2.

Title Core TIs Optional TIs Core Labs Optional Labs. All None 1.1.6, 1.1.7, and Network Math All None None 1.2.5, 1.2.6, and 1.2. CCNA 1 Plan for Academy Student Success (PASS) CCNA 1 v3.1 Instructional Update # 2006-1 This Instructional Update has been issued to provide guidance on the flexibility that Academy instructors now have

More information

Title Core TIs Optional TIs Core Labs Optional Labs. All None 1.1.4a, 1.1.4b, 1.1.4c, 1.1.5, WAN Technologies All None None None

Title Core TIs Optional TIs Core Labs Optional Labs. All None 1.1.4a, 1.1.4b, 1.1.4c, 1.1.5, WAN Technologies All None None None CCNA 4 Plan for Academy Student Success (PASS) CCNA 4 v3.1 Instructional Update # 2006-1 This Instructional Update has been issued to provide guidance to the Academy instructors on the flexibility that

More information

ALABAMA FIRE COLLEGE AND PERSONNEL STANDARDS COMMISSION ADMINISTRATIVE CODE CHAPTER 360-X-2 REQUIREMENTS FOR CERTIFIED FIRE FIGHTER TABLE OF CONTENTS

ALABAMA FIRE COLLEGE AND PERSONNEL STANDARDS COMMISSION ADMINISTRATIVE CODE CHAPTER 360-X-2 REQUIREMENTS FOR CERTIFIED FIRE FIGHTER TABLE OF CONTENTS Fire College Chapter 360-X-2 ALABAMA FIRE COLLEGE AND PERSONNEL STANDARDS COMMISSION ADMINISTRATIVE CODE CHAPTER 360-X-2 REQUIREMENTS FOR CERTIFIED FIRE FIGHTER TABLE OF CONTENTS 360-X-2-.01 360-X-2-.02

More information

An Employer Guide to AMT Certification

An Employer Guide to AMT Certification An Employer Guide to AMT Certification Why Certification Is Important AS AN EMPLOYER, you want to hire qualified personnel to ensure that your patients get the best care possible. AMT shares in this goal

More information

ARKANSAS TECH UNIVERSITY DEPARTMENT OF PARKS, RECREATION & HOSPITALITY ADMINISTRATION

ARKANSAS TECH UNIVERSITY DEPARTMENT OF PARKS, RECREATION & HOSPITALITY ADMINISTRATION ARKANSAS TECH UNIVERSITY DEPARTMENT OF PARKS, RECREATION & HOSPITALITY ADMINISTRATION Recreation & Park Administration Assessment Plan -11 Arkansas Tech University is accredited by the Higher Learning

More information

Industry-based Certifications School Year (2)

Industry-based Certifications School Year (2) Industry-based s 2010-11 School Year (2) Career Cluster Agriculture, Food and Natural Resources IBC / Landscape Contractor/ Louisiana Department of Agriculture and Forestry (LDAF) Horticulturist License/

More information

National School of Business Management

National School of Business Management National School of Business Management School of Business UNDERGRADUATE PROGRAMME SPECIFICATION Programme Title: Bachelor of Science in Business Management (Special) Degree Awards: BSc in Business Management

More information

HOUSTON COMMUNITY COLLEGE SOUTHWEST. Local Area Networks Design and Protocol Cisco 2 - ITCC 1006

HOUSTON COMMUNITY COLLEGE SOUTHWEST. Local Area Networks Design and Protocol Cisco 2 - ITCC 1006 HOUSTON COMMUNITY COLLEGE SOUTHWEST Local Area Networks Design and Protocol Cisco 2 - ITCC 1006 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE

More information

NEW BRUNSWICK. IT Systems Administrator

NEW BRUNSWICK. IT Systems Administrator NEW BRUNSWICK *Please scroll to see other provinces. IT Systems Administrator PROGRAM OBJECTIVES The IT Systems Administrator program will provide students with the skills and knowledge to pursue certifications

More information

This document supersedes Appendix C of GFC Document 877, Revised and Approved September 20, REVIEW OF CERTIFICATE PROGRAMS

This document supersedes Appendix C of GFC Document 877, Revised and Approved September 20, REVIEW OF CERTIFICATE PROGRAMS Graduate Faculty Document No. 1360 Revised and Approved March 27, 2017 UPDATED VERSION AVAILALBE: Please see Faculty Document No. 3207R1 This document supersedes Appendix C of GFC Document 877, Revised

More information

BUSINESS TECHNOLOGY. Administrative Assistant Degree. Administrative Assistant Certificate

BUSINESS TECHNOLOGY. Administrative Assistant Degree. Administrative Assistant Certificate Area: Computer Science & Information Technology Dean: Barbara Blanchard Phone: (916) 484-8361 Counseling: (916) 484-8572 Administrative Assistant Degree The administrative assistant associate degree program

More information

Title Core TIs Optional TIs Core Labs Optional Labs. 1.1 WANs All None None None. All None None None. All None 2.2.1, 2.2.4, 2.2.

Title Core TIs Optional TIs Core Labs Optional Labs. 1.1 WANs All None None None. All None None None. All None 2.2.1, 2.2.4, 2.2. CCNA 2 Plan for Academy Student Success (PASS) CCNA 2 v3.1 Instructional Update # 2006-1 This Instructional Update has been issued to provide guidance on the flexibility that Academy instructors now have

More information

PARALEGAL CERTIFICATIONS. National Professional Standard for Paralegals

PARALEGAL CERTIFICATIONS. National Professional Standard for Paralegals PARALEGAL CERTIFICATIONS National Professional Standard for Paralegals 1 OUR MISSION NALA leads the paralegal profession by providing a voluntary certification program, continuing legal education, and

More information

PARALEGAL CERTIFICATIONS. National Professional Standard for Paralegals

PARALEGAL CERTIFICATIONS. National Professional Standard for Paralegals PARALEGAL CERTIFICATIONS National Professional Standard for Paralegals 1 OUR MISSION NALA leads the paralegal profession by providing a voluntary certification program, continuing legal education, and

More information

FAMIS 2014 Reporting Industry Certifications 6/16/2014

FAMIS 2014 Reporting Industry Certifications 6/16/2014 Purposes for Reporting Industry Certifications Reporting Industry Certifications Tara Goodman Sean Friend Division of Career and Adult Education CAPE Act Florida Education Finance Program (FEFP) School

More information

Program Outcomes (PROGRAM level)

Program Outcomes (PROGRAM level) Program s (PROGRAM level) MCC CTE Program: Industrial Technology Engineering Technology, Computer & Electronics Emphasis CTE or Occupational Program : Students will demonstrate the ability to apply foundational

More information

School of Engineering and the Built Environment Glasgow Caledonian University

School of Engineering and the Built Environment Glasgow Caledonian University School of Engineering and the Built Environment Glasgow Caledonian University MSc Advanced Computer Networking Programme Specification Document Session 2015-16 Programme Specification Pro-forma (PSP) 1.

More information

End of Pathway Assessment (EOPA) Update

End of Pathway Assessment (EOPA) Update End of Pathway Assessment (EOPA) Update Mamie Hanson (404) 657-6279 mhanson@doe.k12.ga.us 8/14/2012 1 Thank You! For Another Year of Dedicated Service 8/14/2012 2 FY2012 EOPA Testing Process Successfully

More information

ASSESSMENT CRITERIA FOR RADIOGRAPHER PROGRAM. To determine whether the identified outcomes are being met, the Program will assess its effectiveness.

ASSESSMENT CRITERIA FOR RADIOGRAPHER PROGRAM. To determine whether the identified outcomes are being met, the Program will assess its effectiveness. ASSESSMENT CRITERIA FOR RADIOGRAPHER PROGRAM To determine whether the identified outcomes are being met, the will assess its effectiveness. Responsibility: Director, Instructors, Clinical Staff. Standard:

More information

Network + Certification ITNW 1091

Network + Certification ITNW 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Network + Certification ITNW 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS

More information

Pilot Testing Information

Pilot Testing Information 500 North Bronson Avenue Big Rapids, MI 49307 800.334.6283 www.nocti.org Pilot Testing Information NOCTI is seeking sites to pilot test our newly developed/revised assessments. Pilot testing is a critical

More information

Liberal Arts and Science Test (LAST)

Liberal Arts and Science Test (LAST) Assessment I: Licensure Assessment Brief Description of Assessment and its Use in the Program Candidates wishing to teach children Birth - Grade 2 are required to pass The New York State Teacher Certification

More information

TECHNOLOGY DEPARTMENT TECHNICAL & COMPUTER AIDED DRAWING

TECHNOLOGY DEPARTMENT TECHNICAL & COMPUTER AIDED DRAWING TECHNOLOGY DEPARTMENT AUTOMOTIVE TECHNOLOGY TRANSPORTATION SYSTEMS (1208) sem This course is an overview of Aerospace, Land and Marine Transportation systems. Vehicle types, engine variations, and auxiliary

More information

Catalog Addendum 3 December 2017

Catalog Addendum 3 December 2017 2017 2018 Catalog Addendum 3 December 2017 The College of the Desert Catalog Addendum represents course and program revisions made since the last publication of the Catalog. Included in this Addendum are

More information

Pathway Assessment Blueprint

Pathway Assessment Blueprint Pathway Assessment Blueprint Interactive Media Test Code: 1132/ Version: 01 Copyright 2011. All Rights Reserved. General Assessment Information General Assessment Information Written Assessment Information

More information

Continuing Professional Education Policy

Continuing Professional Education Policy Continuing Professional Education Policy March 1, 2017 TABLE OF CONTENTS Introduction 3 CPE Policy Background 4 CPE Policy Statement 4 The Credit System 5 The Policy Explained: Questions & Answers 6 Appendix

More information

ITCC Cisco Exploration 1: Networking Fundamentals

ITCC Cisco Exploration 1: Networking Fundamentals Computer Science Technology Department Houston Community College System Department Website: http://csci.hccs.cc.tx.us CRN: 35007 Semester: Fall 2014 CAMPUS: Central Campus DAY/TIME: Thu 6pm -10pm Room:

More information

Certification. What: Who: Where:

Certification. What: Who: Where: Certification What: Certification is a process by which the Wisconsin Technical College System Office evaluates the occupational, academic, and teaching experience of district employees to determine his/her

More information

NWFSC INTERNAL ARTICULATION AGREEMENTS

NWFSC INTERNAL ARTICULATION AGREEMENTS NWFSC INTERNAL ARTICULATION AGREEMENTS NOTE --NO CERTIFICATE OR DEGREE WILL BE AWARDED UNLESS THE STUDENT MEETS GRADUATION REQUIREMENTS AND 25% OF WORK IS NWFSC EARNED The following provisions apply to

More information

NAM-Endorsed Skills Certification System

NAM-Endorsed Skills Certification System NAM-Endorsed Skills Certification System Society of Manufacturing Engineers Certified Manufacturing Technologist (CMfgT) Certified Manufacturing Engineer (CMfgE) Lean Certifications - Bronze, Silver, Gold

More information

Secure Systems Administration and Engineering

Secure Systems Administration and Engineering Secure Systems Administration and Engineering Program Information The job outlook for careers in Cyber Security and Information Technology continues to be very strong. Many experts predict a continued

More information

Implementing the EMS Education Agenda for the Future: A Systems Approach. A Priority for the NASEMSO

Implementing the EMS Education Agenda for the Future: A Systems Approach. A Priority for the NASEMSO Implementing the EMS Education Agenda for the Future: A Systems Approach A Priority for the NASEMSO Objectives Review the development of the EMS Education Agenda for the Future (EAoF) Identify the elements

More information

Kankakee Area Career Center

Kankakee Area Career Center 2016-2017 Kankakee Area Career Center Career & Technical Education At Its Best! Kankakee Area Career Center: About Us The primary purpose of the Kankakee Area Career Center is to meet Career and Technical

More information

Academic Program Review Cyber Security College of Southern Nevada 2017

Academic Program Review Cyber Security College of Southern Nevada 2017 Academic Program Review Cyber Security College of Southern Nevada 2017 ACADEMIC EVALUATION WORKSHEET PROGRAM ASSESSMENT DATA Date Submitted: Submitted by: Margaret Taylor PROGRAM Assessment Data to be

More information

SECTION 4: OUTCOME MEASURE 6 Multiple Documents: Initial Level: TExES State Content Exam Data Chart

SECTION 4: OUTCOME MEASURE 6 Multiple Documents: Initial Level: TExES State Content Exam Data Chart SECTION 4: OUTCOME MEASURE 6 Multiple Documents: Initial Level: TExES Content Exam 2016-2017 Data Chart Initial Level: TExES Pedagogy and Professional Responsibilities Standards Exam 2016-2017 Data Chart

More information

BSc (Honours) Computer Science Curriculum Outline

BSc (Honours) Computer Science Curriculum Outline BSc (Honours) Computer Science Curriculum Outline 1. Introduction: The economic and strategic importance provided by Computer Science and Information Technology is increasing daily. This importance is

More information

Bismarck State College

Bismarck State College Bismarck State College Computer Support Specialist Geographic Information Systems Web Development and Design Computer Science Associate in Applied Science degree Associate in Applied Science degree in

More information

Client Services Procedure Manual

Client Services Procedure Manual Procedure: 85.00 Subject: Administration and Promotion of the Health and Safety Learning Series The Health and Safety Learning Series is a program designed and delivered by staff at WorkplaceNL to increase

More information

Assessment Plan. Academic Cycle

Assessment Plan. Academic Cycle College of Business and Technology Assessment Plan Division or Department: School of Business (Accounting, BS) Prepared by: Nat Briscoe Date: June 21, 2017 Approved by: Margaret Kilcoyne Date: June 21,

More information

How to Become a CMA (Certified Management Accountant) May 10, 2017

How to Become a CMA (Certified Management Accountant) May 10, 2017 How to Become a CMA (Certified Management Accountant) May 10, 2017 Today s Moderator Featured Presenter Agenda The CMA Designation Institute of Management Accountants (IMA) Why get a CMA? CMA Requirements

More information

Program Benefits. Professional Certification Eligibility. Networking. Industry Exposure. Access to PAHCOM Tools and Resources.

Program Benefits. Professional Certification Eligibility. Networking. Industry Exposure. Access to PAHCOM Tools and Resources. Introduction The Academic Credentialing Program (ACP) is modeled after historically successful programs in the accounting, legal, and medical professions wherein specific educational curricula are mastered

More information

BS Electrical Engineering Program Assessment Plan By Dan Trudnowski Spring 2018

BS Electrical Engineering Program Assessment Plan By Dan Trudnowski Spring 2018 BS Electrical Engineering Program Assessment Plan By Dan Trudnowski Spring 2018 What is your program mission statement? The mission of the Electrical Engineering program at Montana Tech is to provide a

More information

National Credentials Initiative

National Credentials Initiative 2018 Workforce & CTE Summer Conference National Credentials Initiative Kimberly Jones Assistant Director of Assessment Mississippi Community College Board Office of Curriculum & Instruction 1 National

More information

Secure Systems Administration and Engineering

Secure Systems Administration and Engineering Secure Systems Administration and Engineering Program Information The job outlook for careers in Cybersecurity and Information Technology continues to be very strong. Many experts predict a continued shortage

More information

Department of Teaching & Learning Parent/Student Course Information

Department of Teaching & Learning Parent/Student Course Information Department of Teaching & Learning Parent/Student Course Information Web Design Foundations (BE 6630) One Credit, One Year Grades 10-12 Counselors are available to assist parents and students with course

More information

PHYSICAL EDUCATION (ADVANCED)

PHYSICAL EDUCATION (ADVANCED) Revised 6-15-09 Program Report Format PHYSICAL EDUCATION (ADVANCED) Kansas State Department of Education COVER SHEET Institution: Emporia State University Accredited By: KSDE NCATE Date Submitted: August

More information

MCC-PV Degrees Awarded by Area of Study

MCC-PV Degrees Awarded by Area of Study 2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 MCC-PV Degrees Awarded by Area of Study 2010-2011 2011-2012 2012-2013 2013-2014 2014-2015 Transfer Degrees: Associate in Arts 104 120 140 138 139 Associate

More information

Department of Business Information Technology

Department of Business Information Technology Department of Business Information Technology 1 Department of Business Information Technology Chair Lorraine J. Willoughby Phone: 701-858-3314 Toll-Free: 1-800-777-0750, ext. 3308 Department Phone: 701-858-3308

More information

This document supersedes Appendix C of GFC Document 877, Revised and Approved September 20, REVIEW OF CERTIFICATE PROGRAMS

This document supersedes Appendix C of GFC Document 877, Revised and Approved September 20, REVIEW OF CERTIFICATE PROGRAMS This document supersedes Appendix C of GFC Document 877, Revised and Approved September 20, 2010. REVIEW OF CERTIFICATE PROGRAMS Graduate Faculty Committee Document No. 1357 requires review of graduate

More information

GRAPHIC DESIGN AND MULTIMEDIA (GDS) GRAPHIC ARTS (GDS) Associate in Science in Graphic Design. Certificate of Achievement in Graphic Arts

GRAPHIC DESIGN AND MULTIMEDIA (GDS) GRAPHIC ARTS (GDS) Associate in Science in Graphic Design. Certificate of Achievement in Graphic Arts 66 GRAPHIC ARTS / MULTIMEDIA training while requiring fewer units of design-focused classes. However, graphic design principles are addressed in the core classes in this program. The classes in the core

More information

Computing Accreditation Commission Version 2.0 CRITERIA FOR ACCREDITING COMPUTING PROGRAMS

Computing Accreditation Commission Version 2.0 CRITERIA FOR ACCREDITING COMPUTING PROGRAMS Computing Accreditation Commission Version 2.0 CRITERIA FOR ACCREDITING COMPUTING PROGRAMS Optional for Reviews During the 2018-2019 Accreditation Cycle Mandatory for Reviews During the 2019-2020 Accreditation

More information

Digital Communication and Aesthetics,

Digital Communication and Aesthetics, Curriculum for the Elective Study at Bachelor Level in Digital Communication and Aesthetics, 2016 Corrected 2017 Amended 2018 Department of Media, Cognition and Communication Faculty of Humanities University

More information

Introduction INDUCTION

Introduction INDUCTION Introduction INDUCTION Induction The Induction certificate provides a statewide structure for the professional development of early career educators and educators new to the state of Georgia and assures

More information

Draft Model Rules for Continuing Professional Education (CPE)

Draft Model Rules for Continuing Professional Education (CPE) Draft Model Rules for Continuing Professional Education (CPE) Approved for exposure for comment by NASBA Board of Directors on January 6, 2017 Comment deadline: April 17, 2017 Send comments to lhaberman@nasba.org

More information

Academic Department Annual Report

Academic Department Annual Report Academic Department: Document Prepared By: Computer Information Systems Andrew Rozema Submission Instructions: This of your Academic Department is intended to serve as a summary of departmental activities

More information

PMP Certification Preparatory Course

PMP Certification Preparatory Course PMP Certification Preparatory Course Client Relation Officer Ewa Kazimierczuk Tel. 508 018 380 ewa.kazimierczuk@pl.ey.com Dates: Warszawa, 8-10 October 2018 5-6 November 2018 Price: 5000 PLN net or 1140

More information

CENTRAL TEXAS COLLEGE ITCC 1414 CCNA 1: Introduction to Networks. Semester Hours Credit: 4

CENTRAL TEXAS COLLEGE ITCC 1414 CCNA 1: Introduction to Networks. Semester Hours Credit: 4 CENTRAL TEXAS COLLEGE ITCC 1414 CCNA 1: Introduction to Networks INSTRUCTOR: OFFICE HOURS: Semester Hours Credit: 4 I. INTRODUCTION A. This course introduces the architecture, structure, functions, components,

More information

Announcement date: December 1, 2009 New program launch date: May 1, 2010

Announcement date: December 1, 2009 New program launch date: May 1, 2010 Overview New Certified Management Accountant (CMA ) Certification Program Announcement date: December 1, 2009 New program launch date: May 1, 2010 Why did ICMA decide to update the curriculum and change

More information

Upon successful completion of this course, the student should be competent to perform the following tasks:

Upon successful completion of this course, the student should be competent to perform the following tasks: COURSE INFORMATION Course Prefix/Number: EET 221 Course Title: Broadband Communication Systems Lecture Hours/Week: 3.0 Lab Hours/Week: 0.0 Credit Hours/Semester: 3.0 VA Statement/Distance Learning Attendance

More information

Oregon Board of Accountancy

Oregon Board of Accountancy Oregon Board of Accountancy WHAT YOU NEED TO KNOW Contact Information Martin Pittioni Executive Director martin.w.pittioni@oregon.gov (503)378-2280 Licensing Department: Kimberly Fast Licensing Manager

More information

Tunxis Community College eportfolio Project Evaluation Report submitted by Professor Laura M. Gambino September 30, 2011

Tunxis Community College eportfolio Project Evaluation Report submitted by Professor Laura M. Gambino September 30, 2011 Tunxis Community College eportfolio Project Evaluation Report submitted by Professor Laura M. Gambino September 30, 2011 eportfolio Project Background and Goals Tunxis Community College, located in Farmington,

More information

N/A. Engineering (MEng) July 2014

N/A. Engineering (MEng) July 2014 Faculty of Engineering & Informatics School of Engineering Programme Specification Programme title: MSc Mechanical Engineering Academic Year: 2017/2018 Degree Awarding Body: Partner(s), delivery organisation

More information

Curriculum Certification Renewal Application Page 1 of 3

Curriculum Certification Renewal Application Page 1 of 3 Curriculum Certification Renewal Application Page 1 of 3 Name of School: Address: Street City State Zip Telephone Number Fax Number Administration: Privately Operated State Supported Community Operated

More information