IT092: Implementing CISCO Data Center Unified Fabric

Size: px

Start display at page:

Download "IT092: Implementing CISCO Data Center Unified Fabric"

Emory Glenn
5 years ago
Views:

1 IT092: Implementing CISCO Data Center Unified Fabric IT092 Rev.001 CMCT COURSE OUTLINE Page 1 of 5

2 Training Description: This intensive course covers all topics in the Cisco DCUFI v5 course, along with unique content on new Nexus hardware and software. This five-day hands-on course is an enhanced version of Cisco's DCUFI, designed for systems and Field Engineers, Consulting Systems Engineers, Technical Solutions Architects, and Cisco Integrators and partners who install and implement the Cisco Nexus 7000, 6000, and 5000 Switches, Cisco MDS, and the Cisco Nexus 2000 Fabric Extender. The course covers the key components and procedures needed to install, configure, manage, and troubleshoot the Cisco Nexus 7000 and 5000 Switches in the network and SAN environment Training Objective: By the end of the training, participants will be able to: Identify the Cisco Nexus product family, specifically the Cisco Nexus 7000 Switch chassis and components; the Cisco Nexus 6000, 5000, and 5500 Switches; and the Cisco Nexus 2000 Fabric Extender Describe how to configure the features of Cisco Nexus switches Describe how to configure Cisco Nexus Switch advanced features such as Overlay Transport Virtualization (OTV), security, and quality of service Identify the management tools that are available for the Cisco Nexus Series Switches and how to configure the relevant tools to support the given design Explain the Fibre Channel Protocol, the Fibre Channel over Ethernet (FCoE) Protocol, and the Data Center Bridging enhancements Describe how to configure Fibre Channel over Ethernet. Describe how to troubleshoot Cisco Nexus Switches. Training Designed for: This course is intended for experienced Network Field Engineers who are already capable of implementing Layer 2 and Layer 3 services using Cisco IOS and the Cisco Catalyst switching platform. Pre-requisites Good understanding of networking protocols - Recommended CCNA Certification. Good understanding of the Fibre Channel protocol and the SAN environment - Recommended attendance of a Fibre Channel protocol class or equivalent experience. Recommended attendance of the Implementing Cisco Storage Network Solutions (ICSNS) class or equivalent experience. Training Program: DAY ONE: PRE-TEST IT092 Rev.001 CMCT COURSE OUTLINE Page 2 of 5

3 Introduction Cisco Nexus Product Overview Lesson 1: Describing the Cisco Data Center Network Architecture Lesson 2: Identifying Cisco Nexus Products DAY TWO: Cisco Nexus Switch Feature Configuration Lesson 1: Understanding High Availability and Redundancy Lesson 2: Configuring Virtual Device Contexts Lesson 3: Configuring Layer 2 Switching Features Lesson 4: Configuring PortChannels Lesson 5: Implementing Cisco FabricPath Lesson 6: Configuring Layer 3 Switching Features Lesson 7: Configuring IP Multicast DAY THREE: Cisco Nexus Switch Advanced Feature Configuration Lesson 1: Describing Cisco OTV Lesson 2: Configuring MPLS Lesson 3: Configuring LISP Lesson 4: Configuring QoS Lesson 5: Configuring Security Features DAY FOUR: Cisco Nexus Storage Features Lesson 1: Describing Fibre Channel Protocol Lesson 2: Describing FCoE Protocol Lesson 3: Identifying DCB Enhancements Lesson 4: Configuring FCoE Lesson 5: Configuring SAN Switching Features Lesson 6: Configuring NPV Mode Lesson 7: Using SAN Management Tools DAY FIVE: Cisco Nexus Switch Management Lesson 1: Using the CMP Lesson 2: Configuring User Management Lesson 3: Describing System Management Labs Nexus 7000 Lab 1: Explore the Cisco Nexus 7000 Series Switch Lab 2: Configure Layer 2 Switching Lab 3: Configure Cisco FabricPath Lab 4: Configure Layer 3 Switching IT092 Rev.001 CMCT COURSE OUTLINE Page 3 of 5

4 Lab 5: Configure OTV Lab 6: Configure QoS Lab 7: Configure Security Features NEXUS 5000 Lab 8: Explore the Cisco Nexus 5000 Switch Lab 9: Configure the Cisco Nexus 2000 Fabric Extender Lab 10: Configure vpcs Lab 11: Configure FCoE Lab 12: Configure NPV Lab 13: Configure System Management Lab 14: Implement Cisco Data Center Network Manager for LAN Course Conclusion POST-TEST and EVALUATION Training Requirement: Hand s on practical sessions, equipment and software will be applied during the course if required and as per the client s request. Training Methodology: This interactive training course includes the following training methodologies as a percentage of the total tuition hours:- 30% Lectures, Concepts, Role Play 30% Workshops & Work Presentations, Techniques 20% Based on Case Studies & Practical Exercises 20% Videos, Software & General Discussions Pre and Post Test Training Certificate(s): Internationally recognized certificate(s) will be issued to each participant who completed the course. Recommended preparation for exam(s): Implementing Cisco Data Center Unified Fabric Training Fees: As per the course location - This rate includes participant s manual, hand-outs, buffet lunch, coffee/tea on arrival, morning & afternoon of each day. IT092 Rev.001 CMCT COURSE OUTLINE Page 4 of 5

5 Training Timings: Daily Timings: 07:45-08:00 Morning Coffee / Tea 08:00-10:00 First Session 10:00-10:20 Recess (Coffee/Tea/Snacks) 10:20-12:20 Second Session 12:20-13:30 Recess (Prayer Break & Lunch) 13:30-15:00 Last Session For training registrations or in-house enquiries, please contact: Aisha Relativo: aisha@cmc-me.com Tel.: or Mob.: Training & Career Development Department IT092 Rev.001 CMCT COURSE OUTLINE Page 5 of 5

IT088-3D: Advanced Microsoft Access

IT088-3D: Advanced Microsoft Access IT088-3D Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: Your training and experience using Microsoft Access has given you basic database management skills