CloudEngine 6850 Series Data Center Switches

Transcription

1 CloudEngine 6850 Series Data Center Switches

2 CloudEngine 6850 Series Data Center Switches Product Overview Huawei CloudEngine 6850 (CE6850 for short) series switches are next-generation 10G Ethernet switches designed for data centers and high-end campus networks, providing high-performance, high-density 10GE ports, and low latency. The CE6850 series uses an advanced hardware architecture with 40GE uplink ports and the industry's highest density of 10GE access ports. Using the Huawei VRP8 software platform, CE6850 switches provide extensive data center service features and high stacking capability. In addition, the airflow direction (front-to-back or back-to-front) can be changed. CE6850 switches can work with CE12800 switches to build an elastic, virtualized, high-quality fabric that meets the requirements of cloud-computing data centers. CE6850 switches provide high-density 10GE access to help enterprises and carriers build a scalable data center network platform in the cloud computing era. They can also be used as aggregation or core switches for enterprise campus networks. Product Appearance The CE6850 comes in nine models. 48*10GE SFP+ ports, or 2/4/8G FC ports, 6*40GE QSFP+ ports 24S2Q-HI 24*10GE SFP+ ports, or 2/4/8G FC ports, 2*40GE QSFP+ ports 48*10GE SFP+ ports, 6*40GE QSFP+ ports 48*10GE Base-T ports, 6*40GE QSFP+ ports Huawei CloudEngine Series Switches 1

3 CE *10GE SFP+ ports, 6*40GE QSFP+ ports 48*10GE Base-T ports, 6*40GE QSFP+ ports 48*10GE SFP+ ports, 6*40GE QSFP+ ports 48T4Q-EI 48*10GE Base-T ports, 4*40GE QSFP+ ports 48S4Q-EI 48*10GE SFP+ ports, 4*40GE QSFP+ ports Product Characteristics High-Density 10GE Access The CE6850 is the industry's highest-performing 1 U ToR switch. It provides 1080 forwarding performance and supports L2/L3 line-rate forwarding. The CE6850 provides 72*10GE ports, the highest 10GE port density among 1 U ToR switches, allowing for high-density 10GE server access. The CE6850 has a maximum of six 40GE QSFP+ ports. Each QSFP+ port can be used as four 10GE SFP+ ports, providing flexibility in networking. The uplink 40GE QSFP+ ports can be connected to CE12800 switches to build a non-blocking network platform. Highly Reliable, High-Performance Stacking The industry's first 16-member stack system A stack system of 16 member switches has up to 768*10GE access ports that provide high-density server access in a data center. 2 Huawei CloudEngine Series Switches

4 Multiple stacked switches are virtualized into one logical device, making it possible to build a scalable, easy-to-manage data center network platform. A stack system separates the control plane from the data plane. This eliminates the risk of singlepoint failures and greatly improves system reliability. Long-distance, highly reliable stacking The CE6850 can use service ports as stack ports. A stack system can be established with switches in the same rack or different racks, and even over long distances. Service and stack bandwidths can be allocated based on the network's scale so that network resources can be used more efficiently. Inter-device Link Aggregation, High Efficiency and Reliability The CE6850 supports multichassis link aggregation group (M-LAG), which enables links of multiple switches to aggregate into one to implement device-level link backup. Switches in an M-LAG system all work in active state to share traffic and back up each other, enhancing system reliability. Switches in an M-LAG system can be upgraded independently. During the upgrade, other switches in the system take over traffic forwarding to ensure uninterrupted services. M-LAG supports dual-homing to Ethernet, TRILL, VXLAN, and IP networks, allowing for flexible networking. Vertical Virtualization Simplifies Management The CE6850 supports Super Virtual Fabric (SVF), which can virtualize multiple physical switches of the same or different types into one logical switch to simplify network management and improve reliability. SVF enables different types of switches to set up a vertical virtual system. In an SVF system, CE6850 switches can act as spine nodes and leaf nodes CE6810 are virtualized into remote line cards of the spine switches. This facilitates cabling and equipment management in equipment rooms. Huawei's SVF is the first in the industry to implement local forwarding on leaf switches. When horizontal traffic dominates in a data center, SVF improves the forwarding efficiency and reduces network delay. Large-Scale Routing Bridge, On-Demand Scaling The CE6850 supports the IETF Transparent Interconnection of Lots of Links (TRILL) protocol and can connect to 10G and 1G servers simultaneously. CE6850 switches can establish a large Layer 2 TRILL network with more than 500 nodes, enabling flexible service deployments and large-scale Virtual Machine (VM) migrations. The TRILL protocol uses a routing mechanism similar to IS-IS and sets a limited Time-to-Live (TTL) value in packets to prevent Layer 2 loops. This significantly improves network stability and speeds up network convergence. On a TRILL network, all data flows are forwarded quickly using Shortest Path First (SPF) and Equal-cost Multi-path (ECMP) routing. SPF and ECMP avoid the suboptimal path selection problem in STP and increase link bandwidth efficiency to 100 percent. Huawei CloudEngine Series Switches 3

5 The CE6850 supports TRILL-based Layer 2 equal-cost paths, greatly improving links' load balancing capabilities. The network has a fat-tree architecture that enhances expansion. Hardware Overlay Gateway Achieves Fast Service Deployment The CE6850 can work with a mainstream virtualization platform and acts a hardware gateway on an overlay network (VXLAN) to support up to 16 million tenants. The CE6850 can connect to a cloud platform through open API to provide unified management of software and hardware networks. The hardware gateway deployment enables fast service deployment without changing the customer network, providing investment protection. The CE6850 supports Border Gateway Protocol - Ethernet VPN (BGP-EVPN), which can run as the VXLAN control plane to simplify VXLAN configuration within and between data centers. Converged Enhanced Ethernet, Allowing for Data, Storage, and Computing Services on One Network CE6850 series switches support Fibre Channel over Ethernet (FCoE), which permits storage, data, and computing services to be transmitted on one network, reducing the costs of network construction and maintenance. CE6850 series switches support centralized FCoE/FC gateway deployment, which makes network O&M simpler. Various CE6850 series switches support multiple data center features: Priority-based Flow Control (PFC), Enhanced Transmission Selection (ETS) and Data Center Bridging exchange (DCBX). These features ensure low latency and zero packet loss for FC storage and high-speed computing services. Fast VM Migration, Policy Mobility The CE6850 works with Huawei's Agile Controller to permit network policies to be dynamically deployed on the CE6850. Agile Controller also supports online VM migration. Agile Controller delivers network policies through high-speed RADIUS interfaces. Its online VM migration is 10 to 20 times the rate of other industry platforms, enabling large-scale VM migrations. Agile Controller is based on open APIs and is compatible with all major virtualization platforms including VMware. Full Openness and Programmability, Flexible Customization The CE6850 uses the Open Programmability System (OPS) embedded in the VRP8 software platform to provide programmability at the control plane. The OPS provides open APIs. APIs can be integrated with mainstream cloud platforms (including commercial and open cloud platforms) and third-party controllers. The OPS enables services to be flexibly customized and provides automatic management. Users or third-party developers can use open APIs to develop and deploy specialized network management policies to implement extension of fast service functions, automatic deployment, and 4 Huawei CloudEngine Series Switches

6 intelligent management. The OPS also implements automatic operation and maintenance, and reduces management costs. The CE6850 supports Puppet automation software, which enables unified provisioning of physical and virtual networks. CE6850 switches can seamless integrate with systems of F5, an industry-leading application delivery network provider, to build an active-active data center network. The OPS provides seamless integration of data center service and network in addition to a serviceoriented, Software-Defined Network (SDN). Zero Touch Provisioning, Automatic O&M The CE6850 supports Zero Touch Provisioning (ZTP). ZTP enables the CE6800 to automatically obtain and load version files from a USB flash drive or file server, freeing network engineers from onsite configuration or deployment. ZTP reduces labor costs and improves device deployment efficiency. ZTP provides built-in scripts for users through open APIs. Data center personnel can use the programming language they are familiar with, such as Python, to provide unified configuration of network devices. ZTP decouples configuration time of new devices from device quantity and area distribution, which improves service provisioning efficiency. Flexible Airflow Design, High Energy Efficiency Flexible front-to-back/back-to-front airflow design The CE6850 uses a front-to-back/back-to-front airflow design that isolates cold air channels from hot air channels. This design meets heat dissipation requirements in data center equipment rooms. Air can flow from front to back, or back to front when different fans and power modules are used. Redundant power modules and fans can be configured to ensure uninterrupted service transmission. Energy-saving technology The CE6850 series switches have energy-saving chips and can measure system power consumption in real time. Fan speeds can be adjusted dynamically based on system consumption. These energysaving technologies reduce O&M costs and contribute to a greener data center. Clear Indicators, Simple Maintenance Clear indicators Port indicators clearly show port status and port speeds. The 40GE port indicators can show the state of all the 10GE ports derived from the 40GE ports. State and stack indicators on both the front and rear panels enable operators to maintain the switch from either side. CE6850 series switches support remote positioning. Operators can turn on remote positioning indicators on the switches they want to maintain, so that they can find switches easily in an equipment room full of devices. Huawei CloudEngine Series Switches 5

7 Simple maintenance The management port, fans, and power modules are on the front panel, which facilitates device maintenance. Data ports are located at the rear, facing servers. This simplifies cabling. Product Specifications Item CE6850U 24S2Q-HI CE6851- CE T4Q-EI 48S4Q-EI 10G Base-T ports SFP+ ports FC ports QSFP+ ports Switching capacity Gbit/s Forwarding rate Airflow design Device virtualization Front-to-back or back-to-front istack 1 Super Virtual Fabric (SVF) 2 M-LAG Network virtualization TRILL VXLAN routing and bridging (CE6800HI) BGP-EVPN (CE6800HI) VM awareness Network convergence Agile Controller FCoE DCBX, PFC, ETS 1 For details about the configuration, please see: 2 For details about the configuration, please see: 6 Huawei CloudEngine Series Switches

8 Item CE6850U 24S2Q-HI CE6851- CE T4Q-EI 48S4Q-EI OpenFlow Programmability OPS Puppet, and OVSDB plugins released on open source websites Linux container for open source and customization programming Traffic analysis NetStream sflow Adding access, trunk, and hybrid interfaces to VLANs Default VLAN VLAN QinQ MUX VLAN GVRP ACL Maximum : 288k Maximum : 288k Maximum : 288k Maximum : 288k Maximum : 288k Maximum: 288k Maximum : 288k Maximum : 128k Maximum: 128k MAC address table Dynamic learning and aging of MAC addresses Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses MAC address limiting based on ports and VLANs ARP (Maximum) IPv4 FIB (Maximum) IP routing 128k 128k 128k 128k 128k 128k 128k 16k 16k 256k 256k 256k 256k 256k 256k 256k 16k 16k IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ IPv6 Neighbor Discovery (ND) IPv6 Path MTU Discovery (PMTU) TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 IPv6 FIB (Maximum) 128k 128k 128k 128k 128k 128k 128k 8k 8k Huawei CloudEngine Series Switches 7

9 Item CE6850U 24S2Q-HI CE6851- CE T4Q-EI 48S4Q-EI Multicast FIB (Maximum) 8k 8k 8k 8k 8k 8k 8k 4k 4k IGMP, PIM-SM, PIM-DM, MSDP, and MBGP IGMP snooping Multicast IGMP proxy Fast leave of multicast member interfaces Multicast traffic suppression Multicast VLAN MPLS MPLS (CE6800HI) LACP STP, RSTP, VBST, MSTP BPDU protection, root protection, and loop protection Reliability Smart Link and multi-instance DLDP ERPS (G.8032) VRRP, VRRP load balancing, and BFD for VRRP BFD for BGP/IS-IS/OSPF/Static route Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority QoS Actions of ACL, CAR, re-marking, and scheduling Queue scheduling algorithms, including PQ, WRR, DRR, PQ+WRR, and PQ+DRR Congestion avoidance mechanisms, including WRED and tail drop Traffic shaping 8 Huawei CloudEngine Series Switches

10 Item CE6850U 24S2Q-HI CE6851- CE T4Q-EI 48S4Q-EI Console, Telnet, and SSH terminals Network management protocols, such as SNMPv1/v2c/v3 Configuration and maintenance File upload and download through FTP and TFTP BootROM upgrade and remote upgrade 802.3az Energy Efficient Ethernet (EEE) Hot patches User operation logs ZTP 802.1x authentication Command line authority control based on user levels, preventing unauthorized users from using commands DoS, ARP, and ICMP attack defenses Port isolation, port security, and sticky MAC Binding of the IP address, MAC address, interface number, and VLAN ID Authentication methods, including AAA, RADIUS, and HWTACACS Remote Network Monitoring (RMON) Dimensions (W x D x H, mm) 442 x 600 x x 600 x x 420 x x 600 x 43.6 Weight (fully loaded) 12.6 kg (27.8lb) 12.3kg (27.1lb) 8.7 kg (19.2lb) 12.6 kg (27.8lb) 8.7 kg (19.2lb) 12.6 kg (27.8lb) 11.6kg (25.6lb) 11.4kg (25.1 lb) 11kg (24.2lb) Security and management Environmental parameters Operating temperature: 0 C to 40 C (32 F to 104 F) (0 m to 1,800 m) Storage temperature: -40 C to +70 C (-40 F to 158 F) Relative humidity: 5% RH to 95% RH, non-condensing Operating voltage AC: V DC: 240V & 380V AC: V DC: 240V & 380V AC: V DC: -38.4V to -72V AC: V DC: 240V & 380V AC: V AC: V DC: -38.4V to -72V Max. power consumption 339W 282W 346 W 216 W 245 W 379W 272 W 380 W 272 W Huawei CloudEngine Series Switches 9

11 Ordering Information Mainframe HI-B-B0A HI-F-B0A HI-B-B00 HI-F-B00 HI-B00 EI-B00 EI-B01 24S2Q-HI CE S4Q-EI 48T4Q-EI Switch (48-Port 10G SFP+, 6-Port 40GE QSFP+, 2*AC Power Module, 2*FAN Box, Port-side Intake) Switch (48-Port 10G SFP+, 6-Port 40GE QSFP+, 2*AC Power Module, 2*FAN Box, Port-side Exhaust) Switch (48-Port 10G SFP+, 6-Port 40GE QSFP+, 2*FAN Box, Without Fan and Power Module) Switch (48-Port 10GE RJ45, 6-Port 40GE QSFP+, 2*FAN Box, Without Fan and Power Module) Switch (48-Port 10GE RJ45, 6-Port 40GE QSFP+, 2*AC Power Module, 2*FAN Box, Port-side Intake) Switch (48-Port 10GE RJ45, 6-Port 40GE QSFP+, 2*AC Power Module, 2*FAN Box, Port-side Exhaust) Switch (2*600W AC Power Module, 2*FAN Box, Port Side Exhaust) 48S4Q-EI Switch (2*350W AC Power Module, 2*FAN Box, Port side exhaust) 48T4Q-EI Switch (2*600W AC Power Module, 2*FAN Box, Port side exhaust) Switch (48-Port 10GE SFP+, support 2/4/8G FC, 6-Port 40GE QSFP+, Without Fan and Power Module) 24S2Q-HI Switch (24-Port 10GE SFP+, support 2/4/8G FC, 2-Port 40GE QSFP+, Without Fan and Power Module) CE6851- Switch (48-Port 10GE SFP+, 6-Port 40GE QSFP+, Without Fan and Power Module) 48T 6Q-HI Switch (48-Port 10GE RJ45, 6-Port 40GE QSFP+, Without Fan and Power Module) Switch (48-Port 10GE SFP+, 6-Port 40GE QSFP+, Without Fan and Power Module) 48S4Q-EI Switch (48-Port 10GE SFP+, 4-Port 40G QSFP+, Without Fan and Power Module) 48T4Q-EI Switch (48-port 10GE RJ45, 4-port 40G QSFP+, Without Fan and Power Module) Fan box Part Number Product Description Support Product FAN-060A-F Fan box (F, FAN panel side intake),,, 24S2Q-HI, 10 Huawei CloudEngine Series Switches

12 FAN-060A-B FAN-40EA-F FAN-40EA-B Power Fan box (B, FAN panel side exhaust) Fan box (EA, Front to Back, FAN panel side intake) Fan box (EA, Back to Front, FAN panel side exhaust),,, 24S2Q-HI, 48T4Q-EI, 48S4Q-EI, CE6851-, 48T4Q-EI, 48S4Q-EI, CE6851-, Part Number Product Description Support Product PAC-600WB-F PAC-600WB-B PHD-600WA-F PHD-600WA-B PAC-350WA-F PAC-350WA-B PAC-600WA-F PAC-600WA-B PDC-350WA-F PDC-350WA-B Software CE68-LIC-VXLAN CE68-LIC-FCF16 CE68-LIC-FCFAL CE6800-LIC-NPV 600W AC&240V DC Power Module (Power panel side intake) 600W AC&240V DC Power Module (Power panel side exhaust) 600W HVDC Power Module (Power panel side intake) 600W HVDC Power Module (Power panel side exhaust) 350W AC Power Module (Front to Back, Power panel side intake) 350W AC Power Module (Back to Front, Power panel side exhaust) 600W AC Power Module (Front to Back, Power panel side intake) 600W AC Power Module (Back to Front, Power panel side exhaust) 350W DC Power Module (Front to Back, Power panel side intake) 350W DC Power Module (Back to Front, Power panel side exhaust) CloudEngine 6800 VXLAN Function CloudEngine 6800 FCF 16 Ports CloudEngine 6800 FCF All Ports CloudEngine 6800 FCOE NPV Function,,, 24S2Q-HI,,,, 24S2Q-HI,,,, 24S2Q-HI,,,, 24S2Q-HI, 48S4Q-EI 48S4Q-EI 48T4Q-EI, CE6851-, 48T4Q-EI, CE6851-, 48S4Q-EI, CE6851-, 48S4Q-EI, CE6851-, Huawei CloudEngine Series Switches 11

13 Networking and Applications Data Center Applications On a typical data center network, CE12800/CE8800/CE7800 switches work as core switches, whereas CE6800 and CE5800 switches work as ToR switches and connect to the core switches using 100GE/40GE/10GE ports. These switches use fabric technology such as TRILL or VXLAN to establish a non-blocking large Layer 2 network, which allows largescale VM migrations and flexible service deployments. Note: TRILL and VXLAN can be also used on campus networks to support flexible service deployments in different service areas. CE12800 CE8800 CE7800 CE8800 CE6800 CE5800 FW LB Internet Cloud Fabric WAN IP/VPN 100GE/40GE/10GE 10GE/25GE GE FW LB Campus Network Applications CE6800 switches can be used as aggregation or core switches on a campus network. Their high-density, linerate 10GE ports and high stacking capability can meet the ever-increasing demand for network bandwidth. CE6800 switches are cost-effective campus network switches, thanks to their extensive service features and innovative energy-saving technologies. On a typical campus network, multiple CE12800/CE8800/CE7800 switches are virtualized into a logical core switch using CSS or istack technology. Multiple CE8800/CE7800/CE6800 switches at the aggregation layer form a logical switch using istack technology. CSS and istack improve network reliability and simplify network management. At the access layer, CE6800/CE5800 switches are virtualized with cloud fabric technology, such as SVF or M-LAG (vertical virtualization), to provide high-density line-rate ports. Note: istack technology is also widely used in data centers to facilitate network management. Internet/WAN Enterprise Data Center... CE12800 CE8800 CE7800 Web Server Database APP Server Database CE8800 CE7800 CE6800 CE6800 CE5800 Cloud Fabric 100GE/40GE 40GE/10GE Training Area Official Production Area Dormitory 12 Huawei CloudEngine Series Switches

14 Copyright Huawei Technologies Co., Ltd All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.