WISP Setup Guide for TP-Link TL-WR841N 300 Mbps Wireless N Router AARP Foundation Tax-Aide Colorado Technology Specialist
|
|
- Alexis Fisher
- 5 years ago
- Views:
Transcription
1 WISP Setup Guide for TP-Link TL-WR841N 300 Mbps Wireless N Router AARP Foundation Tax-Aide Colorado Technology Specialist Summary This document explains how to configure the TP-Link WR841N router to provide a secure private network for Tax-Aide work. It is based on the document titled WISP Setup Guide for TP-Link TL- WR810N, produced by the Tax-Aide National Technology Committee. Contents WISP Setup Guide for TP-Link TL-WR841N 300 Mbps Wireless N Router... 1 Summary... 1 Overview... 1 Collect Information, Set Up Your Computer and Connect the Router... 1 Router Setup... 2 Accessing the Router after Configuration... 7 Recommended Configuration... 8 Set Time Zone and Time... 8 Check for New Firmware... 9 Set the DHCP IP Pool Address Range Backup Configuration Overview This setup must be performed for first-time connection to the host site wireless network or AARP hotspot, or if the host site s or hotspot s network name or password changes. This setup makes the router work at one site or for hotspot only. If connecting to a host site internet connection, the setup must be done at that site. Collect Information, Set Up Your Computer and Connect the Router 1. Get the SSID (network name) and password for the network to which you are going to connect (host site or AARP hotspot.) 2. Use a recently reimaged AARP laptop for the setup. 3. Get the SSID and the wireless password for the TP-Link TL-WR841N router from the label on its bottom site. Note that the label is very small, smaller than pictured here. 1
2 Note: If you accidentally lose the connection, get lost, or otherwise fail, you can always start over at step 4. Router Setup 4. Restore router default settings. Connect the router to power, then push and hold the WPS/Reset button until the lights flash, and the power indicator light thereafter the WiFi signal light will turn on. 5. Connect to the router. Left click the WiFi symbol in the Windows system tray (normally in the lower-right corner of the Windows desktop), select the SSID for the TP-Link router, click the Connect button, type in the router s factory wireless password (printed on the label on the bottom of the router), then press the Next button. alone flashes. Shortly 6. Access the router login page. Open a web browser and type in the address bar and press Enter. The Login dialog will be displayed: 7. Log in to the router administration page. Type admin in both the Username and Password fields then click the Log In button. 8. Run Quick Setup. When the Quick Setup Start page opens, click the Next button. 2
3 9. Quick Setup Operation Mode: Select Hotspot Router or WISP then click the Next button: 10. Quick Setup WAN Connection Type. Select Dynamic IP then click the Next button: 11. AP List. A list of WiFi networks will appear. (Your list will be different than illustrated here and may have only one WiFi network, the public network at the facility where you do taxes.) 12. Select the host network. Click on the blue underlined text labeled Connect to connect to the public network of your Tax-Aide facility. 3
4 13. Client Setting. If the host WiFi network at your facility requires a password to connect to, enter it in the Wireless Password field. Otherwise, leave this field blank: 14. AP Setting. (You will likely need to scroll down to see this entry field.) a. Local Network SSID. Enter your Tax-Aide network name. If you have not defined one locally, enter TA. b. Wireless Security Mode. Leave WPA2-PSK selected. c. Wireless Password. Enter the password for your Tax-Aide network. This is the password your counselors will use to connect to the Tax-Aide secure WiFi network on their computers. d. Click the next button at the bottom of the page. 15. Reboot the router. Press the Finish button to reboot the router. The router will take several seconds to reboot: Note: Once the router has rebooted, your Web browser will lose connectivity to the Internet and to the router itself. This site can t be reached or No internet may be displayed in the browser window. 4
5 16. Reconnect to the router. Left click the WiFi symbol in the Windows system tray, select the name of the Tax-Aide network (TA, for example) from step 14, and click the Connect button. Next, enter the password created in step 14, then press the Next button. 17. If necessary, access the router login page. (Note: If you left the browser window open, this step will likely not be necessary.) Open a browser window and type in the address bar and press Enter. The Login dialog will be displayed. Type admin in both the Username and Password fields then click the Log In button. 5
6 18. Change the router administration credentials. a. Click on System Tools near the bottom of the left menu column, then on Password in the expanded menu. b. Enter the factory default router s ( old ) username and ( old ) password (admin for both), then enter a New User Name, New Password and Confirm Password, then click the Save button. (You may choose your own new user name and password. Be sure to remember them!) You will be logged off and returned to the router administration login page. 6
7 19. Change the router IP address (optional but recommended). This will minimize issues related to IP address conflicts. a. Login using the new router administration Username and Password defined in the previous step. b. Click on Network in the left-hand menu, then LAN. Change the IP Address to , or to the IP address you prefer for your site. Next, press the Save button. A pop-up will display Modification of LAN IP Address or Subnet Mask will take effect after rebooting, click OK to reboot the device now. Go ahead and click the OK button. A progress bar will display as the router reboots. Accessing the Router after Configuration After completing this configuration, to access the router s Log In page, you will first need to connect to its WIFi network (e.g. TA ), then type the IP address you defined in step 19 in a browser window (e.g ). 7
8 Recommended Configuration We recommend the following to further configure your router: Set the correct time zone and time. Enable daylight savings time. Update firmware to the latest available version Backup configuration settings Set the DHCP IP Pool address range Set Time Zone and Time 1. Access the router login page. Open a web browser and type (or the custom gateway address you picked for your site) in the address bar and press Enter. The Login dialog will be displayed. Enter the router s new Username and Password you defined in step 18 on page 6 then press Log In. 2. Select System Tools then Time Settings from the left-hand menu: 8
9 3. Change Time Settings: a. Change the time zone to your time zone. b. Ensure the date and time are set correctly in Windows on your computer. Then press the Get from PC button. c. Press the top Save button. d. Tick the Enable Daylight Savings checkbox. e. Press the bottom Save button. Check for New Firmware We recommend checking for new firmware periodically, at least before the start of a new tax season. 1. Access the router login page. Open a web browser and type (or the custom gateway address you picked for your site) in the address bar and press Enter. The Login dialog will be displayed. Enter the router s new Username and Password you defined in step 18 on page 6 then press Log In. 9
10 2. Select System Tools then Firmware Upgrade from the left-hand menu: The router s current firmware version will be displayed: 3. Check for a new firmware version on TP-Link s Web. Click on the link shown in the help section on the right-hand side of the page: 10
11 4. Select Support on TP-Link s Web site: 5. Enter the model number of your router (e.g. TL-WR841N), then press the search icon: 6. Click on 300Mbps Wireless N Router next to the photo of the router: 7. Click on Support in the Overview Specifications Support submenu: 11
12 8. Verify the version number of your router. It is printed just below the top bar code on the bottom of the router. Make a note of this version, then select it from the Hardware Version dropdown menu. Next, press the Firmware button: 9. Scroll down past the list of instructions and warnings to the first entry in the set of firmware versions. Note the version of the latest firmware and compare it to your current version: If the versions installed on your router is the same as the latest version offered on TP-Link s site, you do not need to do anything. If it is newer, click on the blue text to download the new version. a. After clicking on the link, you will be prompted for the location to store the download. You may choose a Download folder on your PC, a USB thumb drive, a network drive, or any other location where you usually save downloads. b. Once the download has completed, locate it in File Explorer (Windows Explorer in Windows 8 and earlier). Right-click and select Extract All to unzip the download: 12
13 c. If desired, change the folder where you want the files to be extracted, or leave the default. Press the Extract button: d. Make note of where these extracted files are on your PC. 10. Return to your router s configuration page following steps 1 and 2 on page Select the Choose File button on the Firmware Upgrade page: 12. Locate the bin file in the location on your computer where you unzipped the download from TP-Link, click the filename to select it, then press the Open button: 13
14 13. Press the Upgrade button: The upgrade will be installed on the router. Once complete, the router will automatically reboot. 14
15 Set the DHCP IP Pool Address Range By default, the TP-Link WR841N router enables one-hundred computers at one time to connect. If you set the Default Gateway address to as described in step 19 on page 7, the range of IP addresses that will be assigned to computers and other devices (cell phones, tablets, etc.) is from to You may want to reduce the size of this range to a smaller value. One reason for doing so is to allocate a few addresses outside of what DHCP assigned to use for devices you ve assigned fixed IP addresses, printers, for example. 1. Access the router login page. Open a web browser and type (or the custom gateway address you picked for your site) in the address bar and press Enter. The Login dialog will be displayed. Enter the router s new Username and Password you defined in step 18 on page 6 then press Log In. 2. Select DHCP then DHCP Settings in the left-hand menu: 3. Select your desired Start IP Address and End IP Address. For example, a starting address of with an ending address of will support thirty connected computers or other devices: Press the Save button once you ve entered your desired start and end IP addresses. Note: We recommend that network connected printers (connected either through a hard-wired Ethernet or WiFi connection) are set up to use a fixed IP address outside of the DHCP range. For example, given the settings shown above, you might set the IP address of the printer to 15
16 , which is outside the range of to Using this technique, the IP address of the printer will remain the same, so that all laptops on your network will be able to assume that the printer has the same address as the last time the router was restarted. To set a fixed IP address for a printer, you use either the printer s front panel controls, or the printer s Web page. Backup Configuration It can sometimes come in handy to backup the configuration of your router. Doing so saves all the changes you ve made to your router in a file that you can keep on your PC or a USB thumb drive. This is especially handy if you manage more than one router in your district. You can set up the first router, then restore its configuration to the other (identical model) routers you use elsewhere. 1. Access the router login page. Open a web browser and type (or the custom gateway address you picked for your site) in the address bar and press Enter. The Login dialog will be displayed. Enter the router s new Username and Password you defined in step 18 on page 6 then press Log In. 2. Select System Tools then Backup & Restore in the left-hand menu: 3. Press the Backup button 16
17 4. Select a name and location to save the configuration backup file. The default name is conf.bin. You may want to rename this to something more meaningful using the model of the router and today s date, for example: TP-Link TL-WR841N Router Backup bin. 5. At a later time, or with a different router of the same model, you can use the Restore button on this screen to load the router with the defaults you just saved. 17
Setup Guide for Hard-Wire Ethernet Connected TP-Link TL-WR841N 300 Mbps Wireless N Router AARP Foundation Tax-Aide Colorado Technology Specialist
Setup Guide for Hard-Wire Ethernet Connected TP-Link TL-WR841N 300 Mbps Wireless N Router AARP Foundation Tax-Aide Colorado Technology Specialist Summary This document explains how to configure the TP-Link
More informationNetis WF-2411 Quick Configuration Guide NTC November TCS Webinar 1
Netis WF-2411 Quick Configuration Guide 1 Background AARP Policy on Public WiFi No computer being used for AARP Foundation Tax-Aide work is allowed to be connected directly to a public WiFi All connections
More informationBrother HL-5370DW Configuration
Brother HL-5370DW Configuration Importance of Static IP Address for Printers When a printer is first installed to a computer, its IP address is noted. If that address changes, the computer will be unable
More informationQuick Start Guide for Standalone EAP
Quick Start Guide for Standalone EAP CHAPTERS 1. Determine the Management Method 2. Build the Network Topology 3. Log In to the EAP 4. Edit the SSID 5. Configure and Manage the EAP This guide applies to:
More informationClick on Close button to close Network Connection Details. You are back to the Local Area Connection Status window.
How to configure EW-7228APn/EW-7416APn as a Repeater to extend wireless range This article can apply on EW-7228APn and EW-7416APn. We used screen shots of EW-7416APn in this instruction. We recommend you
More informationWireless Printing Updated 10/30/2008 POLICY. The use of Wireless Networking is not permitted at any site for full client/server networking of Taxwise.
Updated 10/30/2008 POLICY Tax-Aide Wireless Printing Policy The use of Wireless Networking is not permitted at any site for full client/server networking of Taxwise. Wireless networking, for the purpose
More informationShaw Business Hitron Modem (CGNM-2250) Configuration User Guide
Shaw Business Hitron Modem (CGNM-2250) Configuration User Guide Contents 1. How to Login to your Hitron Modem... 3 2. SmartWiFi and Local Area Network (LAN) set up...4 a. LAN Setting -Private Gateway IP
More informationHow to manually set up EW-7228APn to extender wireless range
How to manually set up EW-7228APn to extender wireless range 1. Find out the IP address of your computer. Have your computer get on Internet as normally, without EW-7228APn turning on. If you use a Windows
More informationLab 7.5.1: Basic Wireless Configuration
Topology Diagram Learning Objectives Configure options in the Linksys Setup tab. Configure options in the Linksys Wireless tab. Configure options in the Linksys Administration tab. Configure options in
More informationWiFi-Repeater User Manual. Quick Installation Guide(Q.I.G.) REV.1.2
WiFi-Repeater User Manual Quick Installation Guide(Q.I.G.) REV.1.2 Introduction: The WiFi Repeater is a combined wired/wireless network connection device designed specifically for small business, office,
More information3G Wireless Travel Router 150M Quick Installation Guide
3G Wireless Travel Router 150M Quick Installation Guide MODEL: 7R300 Warning 7R300 Quick Installation Guide Before you start to use this device, please check if there s anything missing in the package,
More informationPlease note, instructions in this guide are based on a PC running Windows 7. Please adapt the actions to suit your operating system.
Please note, instructions in this guide are based on a PC running Windows 7. Please adapt the actions to suit your operating system. Please follow these steps to ensure that any changes made by your previous
More informationConfiguring a BELKIN Router. Basic Configuration Steps
Configuring a BELKIN Router Basic Configuration Steps Configuring Your Router STEP 1 (a): Connect Your PC to the Router Unbox the router and power up the router. Connect the Act internet cable to the WAN/Internet
More informationProcedure to Upgrade Verizon FiOS Router and Configure Xbox 360 to connect with Microsoft USB WiFi Adapter
FiOS TV & Internet Verizon DSL FAQ s Wireless Verizon Bundles Verizon Support Procedure to Upgrade Verizon FiOS Router and Configure Xbox 360 to connect with Microsoft USB WiFi Adapter Overview The current
More informationPrinter Installations for TaxWise TY 2011 September 14, 2011
Summary: This document describes how to set up a network using two or more computers, a router and a printer. The network may consist of wired, wireless, or a combination of both wired and wireless type
More informationQuick Setup Guide. for Standalone Omada Access Points. EAP110 / EAP115 / EAP225 / EAP245 / EAP320 / EAP330 / EAP115-Wall
Quick Setup Guide for Standalone Omada Access Points EAP110 / EAP115 / EAP225 / EAP245 / EAP320 / EAP330 / EAP115-Wall EAP110-Outdoor / EAP225-Outdoor / EAP225-Wall 1910012420 REV1.0.1 May 2018 Omada EAP
More informationDifferent Application Scenarios to use the TP-Link dual band range extender
Different Application Scenarios to use the TP-Link dual band range extender A dual band range extender, it can extend 2.4Ghz and 5Ghz networks at the same time.the settings are configured slight differently
More informationIt is a Plug & Play Solution It is a bundle, containing an HP5100S and an NHP5010
Note: The following Quick Installation Guide has been designed for the Addon NHP5010BD1 bundle, but it can be used for all other bundles. Powerline Adapter (also called Homeplug) is a device that carries
More informationWF-2402 Quick Installation Guide
WF-2402 Quick Installation Guide Netis 150Mbps Wireless-N Broadband Router 1. Check Your Package Contents The following items should be found in your package: 150Mbps Wireless-N Broadband Router Power
More informationAIR HANDLING UNIT CONNCECTION VIA TL-WR802N (AHU, TL-WR802N, smartphone) QUICK LAUNCH GUIDE P0117_AZ_0001
WWW.SALDA.LT AIR HANDLING UNIT CONNCECTION VIA TL-WR802N (AHU, TL-WR802N, smartphone) QUICK LAUNCH GUIDE P0117_AZ_0001 CONTENTS I. CONNECTING THE ROUTER 3 II. TP-LINK WIRELESS N NANO ROUTER RANGE EXTENDER
More information3G WIFI ROUTER/POWERBANK Quick Guide
3G WIFI ROUTER/POWERBANK Quick Guide The factory default password WIFI connection: 12345678 Initial Account: admin Default password: admin Ports: 21 3GWi-Fi is one Power bank and mobile 3G wifi router
More informationWeb management. How to access to the web management. Log into the web management via a laptop
Web management Your InstaShow is equipped with the web management that enables you to configure its features through a browser such as Google Chrome, Internet Explorer, or Firefox. The features may vary
More informationPremiertek AP Mbps Wireless-N Broadband Router Quick Installation Guide
Premiertek AP2402 150Mbps Wireless-N Broadband Router Quick Installation Guide V1.0.8.11 1. Check Your Package Contents The following items should be found in your package: 150Mbps Wireless-N Broadband
More informationIpAlarm Module Set Up
Page 1 IpAlarm Module Set Up Note: This device is shipped configured for Ethernet connectivity. To use in this mode, connect the BLUE Jack (marked WAN) to your router and wait for the LEDs to stabilize.
More informationUser Manual DIR-850L. Wireless AC1200 Dual Band Gigabit Router.
User Manual DIR-850L Wireless AC1200 Dual Band Gigabit Router USER MANUAL: DIR-850L Wireless AC1200 Dual Band Gigabit Router SYSTEM REQUIREMENTS Network Requirements Web-based Configuration Utility Requirements
More informationInstruction with Screenshot for WEB
Instruction with Screenshot for WEB Step 1: Attaching your external USB storage device: You can attach USB flash disk, USB HDD, USB card reader as your NAS. However, attaching a cell-phone or tablet as
More informationHSPA+ WiFi Router with Voice
NETCOMM LIBERTY SERIES HSPA+ WiFi Router with Voice 3G22WV Quick Start Guide This router has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The LED
More informationLab - Configure Wireless Router in Windows
Introduction In this lab, you will configure and test the wireless settings on a wireless router. Recommended Equipment A computer with Windows installed A Wireless NIC installed An Ethernet NIC installed
More informationSecurity SSID Selection: Broadcast SSID:
69 Security SSID Selection: Broadcast SSID: WMM: Encryption: Select the SSID that the security settings will apply to. If Disabled, then the device will not be broadcasting the SSID. Therefore it will
More informationConceptronic C100BRS4H Quick Installation Guide. Congratulations on the purchase of your Conceptronic 4-ports Broadband Router.
Conceptronic C100BRS4H Quick Installation Guide Congratulations on the purchase of your Conceptronic 4-ports Broadband Router. The enclosed Hardware Installation Guide gives you a step-by-step explanation
More informationSL620/DS-Tmini Snaplab+ Internet Configuration Setting procedure
SL620/DS-Tmini Snaplab+ Internet Configuration Setting procedure DNP PIE Nov 2015 V1.1 CONTENTS Introduction... 3 Router Update and Settings for SL-620:... 3 What is new?... 3 1. Updating the existing
More informationTWO Internet Set-up Instructions
Purpose Of This Document This document describes the items needed, and configuration of those items, for connection of TWO workstations to the Internet. The workstations will also need to be networked
More informationWhy my TP-Link router can not get WAN parameters from my modem? This Article Applies to:
Why my TP-Link router can not get WAN parameters from my modem? This Article Applies to: Precondition:Make sure Internet works fine if you connect the computer directly to the modem,by pass the TP-Link
More informationLEGUANG N900 Wireless Router Configuration Guide
LEGUANG N900 Wireless Router Configuration Guide ActForNet Technologies Inc. February 2014 Contents 1. What is included... 3 2. Installation Guide... 3 2.1 How to connect... 3 2.2 How to reset... 4 2.3
More information1. Press "Speed Test" to find out your actual uplink and downlink speed.
ASRock G10 Gaming Router 6.4 QoS Settings QoS Add Gaming Boost web page. Gaming Boost: Enable or disable the Gaming Boost. Bandwidth The router supports Gaming Boost natively, which identifies and intelligently
More informationUser Guide. 450Mbps/300Mbps Wireless N Access Point TL-WA901ND/TL-WA801ND REV
User Guide 450Mbps/300Mbps Wireless N Access Point TL-WA901ND/TL-WA801ND REV4.0.0 1910011930 Contents About This Guide...1 Chapter 1. Get to Know About Your Access Point.................... 2 1. 1. Product
More informationTP-Link - TL-WR1043N / TL-WR1043ND. 300Mbps Wireless N Gigabit Router Fiber Setup Guide
TP-Link - TL-WR1043N / TL-WR1043ND 300Mbps Wireless N Gigabit Router Fiber Setup Guide Contents 1 Main Features... 2 2 Front Panel... 3 3 Back Panel... 4 4 How to setup your hardware... 5 5 Quick Installation
More informationContents. Table of Contents
Table of Contents Contents 1. Web Interface Configuration... 2 1.1 Login Information... 3 1.2 Saving Configuration Changes... 4 1.3 Status Page... 5 1.4 Log... 6 1.4.1 Log Settings... 6 1.4.2 Syslog...
More informationIpAlarm Module Set Up VirtuAlarm model
Page 1 IpAlarm Module Set Up VirtuAlarm model Note: This device is shipped configured for Ethernet connectivity. To use in this mode, connect the BLUE Jack (marked WAN) to your router and wait at least
More informationHow to configure a Point-to-Point link
How to configure a Point-to-Point link SilverNet equipment comes Pre-configured on IP addresses 192.168.0.229 or 192.168.0.228. There may be some instances where you need to reset the unit or the unit
More informationAC1900 Nighthawk WiF Mesh Extender
AC1900 Nighthawk WiF Mesh Extender Model EX7000 User Manual July 2018 202-11469-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support
More informationWIRELESS CPE/AP 5G OUTDOOR 300MBPS WL-CPE5G48-058
WIRELESS CPE/AP 5G OUTDOOR 300MBPS WL-CPE5G48-058 USER MANUAL REV.1216 Thanks for choosed our product INDEX CHAPTER 1 Connection and Power Supply 1.1 Port Connection and power supply CHAPTER 2 Login CHAPTER
More informationHow to upgrade the firmware
How to upgrade the firmware This document will detail how to update the firmware on DAP-1150. Ensuring the firmware remains up to date can assist with functionality / improved performances as well as adding
More informationStylitis-10+ WiFi Setup
Stylitis-10+ WiFi Setup In order for Stylitis-10+WiFi to operate, it must be connected to an access point. The WiFi module has a default IP: 169.254.228.4. In order for it to be in the same sub-network
More information3GWIFIMRD. 3.5G plus WLAN Desktop Server Router. Quick Setup Guide. 1 Version 1.0
3GWIFIMRD 3.5G plus WLAN Desktop Server Router Quick Setup Guide 1 Version 1.0 Declaration of Conformity Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive
More informationLevelOne FNS bay/1usb Soho NAS. User s Manual
LevelOne FNS-1000 1- bay/1usb Soho NAS User s Manual Table of Contents Introduction... 2 The FNS-1000 NAS Server... 2 FNS-1000 Features... 2 Package Contents... 2 System Requirements... 2 Disclaimer...
More informationWhat can I do in the settings menu of my WL-330 (which settings are there and what can I change)?
What can I do in the settings menu of my WL-330 (which settings are there and what can I change)? Introduction The settings menu of your WL-330 allows you to customise the settings of this range extender.
More informationACTi IP Utility. Ver
ACTi IP Utility Ver 3.5.23 Table of Contents Start IP utility... 3 IP Utility Device List... 4 User Interface... 4 Menu Bar... 4 Device List... 8 2 Start IP utility To start IP Utility, double-click the
More informationTABLE OF CONTENTS COPYRIGHT INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION
TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3 2. MFP SERVER INSTALLATION...5 PREPARATION...5 CONFIGURATION SOLUTION TABLE...5
More informationNetwork Connection Manager Edition
Secure Lockdown Network Connection Manager Edition for Windows User Guide Contents Welcome... 3 System Requirements... 3 Installation... 3 Product Activation... 4 Product Deactivation... 4 Managing Licenses...
More informationHow to configure a Point-to-Multipoint link
How to configure a Point-to-Multipoint link SilverNet equipment comes Pre-configured on IP addresses 192.168.0.229 or 192.168.0.228. There may be some instances where you need to reset the unit or the
More informationWireless Setup Instructions
Wireless Setup Instructions THESE INSTRUCTIONS ARE VERY IMPORTANT TO SECURE YOUR WIRELESS NETWORK The purpose of this procedure is to "lock" your router so other users can not access your network without
More informationAXIS Camera Station S20 Appliance Series AXIS Camera Station S2008 Appliance AXIS Camera Station S2016 Appliance AXIS Camera Station S2024 Appliance
AXIS Camera Station S2008 Appliance AXIS Camera Station S2016 Appliance AXIS Camera Station S2024 Appliance User Manual Table of Contents About the AXIS Camera Station S20 Appliance Series.............
More information300M Wireless-N Broadband Router User Manual
300M Wireless-N Broadband Router Model No.: ib-wrb314n User Manual Ver.: 1.0.0 Contents...Error! Bookmark not defined. Chapter 1 Product Overview... 3 Package Contents 3 Conventions....4 Panel Overview...
More informationWireless Setup Guide (for Windows XP, Windows Vista, Windows 7, Windows 8 and Mac OSx)
Wireless Setup Guide (for Windows XP, Windows Vista, Windows 7, Windows 8 and Mac OSx) Wireless Setup Guide The following steps will take you through the process of setting up and connecting to your wireless
More informationA Division of Cisco Systems, Inc. GHz g. Wireless-G. Access Point. User Guide WIRELESS. WAP54G ver Model No.
A Division of Cisco Systems, Inc. GHz 2.4 802.11g WIRELESS Wireless-G Access Point User Guide Model No. WAP54G ver. 3.1 Copyright and Trademarks Specifications are subject to change without notice. Linksys
More informationDSL-G624T. Wireless ADSL Router. If any of the above items is missing, please contact your reseller. This product can be set up using any
This product can be set up using any current web browser, i.e., Internet Explorer 6x or Netscape Navigator 7x. DSL-G624T Wireless ADSL Router Before You Begin 1. If you purchased this Router to share your
More informationNM6000 User's guide v1.2
USER S GUIDE NM6000 WLAN Clientt http://www.wiznet.co.kr Copyright 2004 WIZNET Inc. All Rights Reserved. 1 Table of Contents 1 INSTALLATION...3 1.1 POINTS TO REMEMBER BEFORE INSTALLATION...3 1.2 ACCESSING
More informationNCR. Wi-Fi Setup Assistant. User guide
NCR Wi-Fi Setup Assistant User guide 15 Contents 1 Getting started... 3 1.1 Features... 3 1.2 System Requirements... 3 1.3 Installing Wi-Fi Setup Assistant... 4 2 Configuring a Wi-Fi Printer... 6 2.1 Setup
More informationWRE6606. User s Guide. Quick Start Guide. Dual-Band Wireless AC1300 Access Point. Default Login Details. Version 1.00 (ABDU.0) Edition 1, 10/2016
WRE6606 Dual-Band Wireless AC1300 Access Point Version 1.00 (ABDU.0) Edition 1, 10/2016 Quick Start Guide User s Guide Default Login Details Web Address http://zyxelsetup http://dhcp-assigned IP www.zyxel.comhttp://192.168.1.2
More informationMARQUE: GARMIN REFERENCE: EX FRS CODIC: NOTICE
MARQUE: GARMIN REFERENCE: EX3800-100FRS CODIC: 4121198 NOTICE Model EX3800 User Manual May 2015 202-11488-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products.
More informationQuick Installation Guide
V50.02 Model: FI8918W Quick Installation Guide Indoor Pan/Tilt Wireless IP Camera Black White For Windows OS ------- Page 1 For MAC OS ------- Page 14 Quick Installation Guide For Windows OS Package Contents
More informationVISTA Transfer Station Setup
Setup Setup The allows your agency to upload video evidence to its WatchGuard Video Evidence Library software from multiple VISTA cameras simultaneously. Each VISTA Transfer Station has eight slots for
More informationWireless Router Lab Created by Joshua Newell, A+
Create a team of two partners. Partner closer to the wall/partition will be the Wired Partner Partner closer to the walkway will be the Wireless Partner Wired Partner: Plug the router into the power socket.
More informationGET STARTED AC 1200 High Power Dual Band Wi-Fi Range Extender
GET STARTED AC 1200 High Power Dual Band Wi-Fi Range Extender Overview 01 Package Contents... 01 Front Panel... 02 LED Descriptions... 03 Using as an Extender 04 Connects to a WIFI network... 04 Acts as
More informationField PC 2 Windows OS Update Guide
Field PC 2 Windows OS Update Guide All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the
More informationWarning. About CONTROLLING LIGHTS OR HEATING
on/off commands ebookingonline.net TechNote This document contains information on using the ebookingonline.net windows application for controlling lighting and or heating. This application is supported
More informationAirLive RS Security Bandwidth Management. Quick Setup Guide
AirLive RS-2000 Security Bandwidth Management Quick Setup Guide Important Information The AP mode s default IP address is The default Subnet Mask is The default login name is The default password is!!!!
More informationManual of Wireless Access Point
Manual of Wireless Access Point This is the manual of outdoor CPE, which will approximate guide you how to set and apply the outdoor CPE, it provide a convenient graphical interface for network construction
More informationWireless-G Router User s Guide
Wireless-G Router User s Guide 1 Table of Contents Chapter 1: Introduction Installing Your Router System Requirements Installation Instructions Chapter 2: Preparing Your Network Preparing Your Network
More informationDG-HR1160M Portable Power Bank 3G Router User Manual
DG-HR1160M Portable Power Bank 3G Router User Manual V1.0 2013-11-14 As our products undergo continuous development the specifications are subject to change without prior notice COPYRIGHT Copyright 2013
More informationQuick Installation Guide DSL-2650U/NRU. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch
DSL-2650U/NRU 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Router DSL-2650U/NRU Power adapter RJ-11 telephone cable Straight-through Ethernet cable (CAT 5E)
More informationSmart Sensor Gateway Installation Manual
TECHNICAL DOCUMENT Smart Sensor Gateway Installation Manual 2019-02-08 1/16 Table of Contents 1 GENERAL 3 2 INSTALLATION 4 2.1 Prerequisites for Installation 4 2.2 Recommended Location 5 2.3 Gateway Configuration
More informationRAPIDUS WIRELESS RL-SERIES USER GUIDE
RAPIDUS WIRELESS NETWORKS RAPIDUS WIRELESS RL-SERIES USER GUIDE COVERS INDOOR AND OUTDOOR SERIES MODELS Revision: 6.x.x. Firmware: RL-K-R6 Date: April.5.2018 Rafael Garrigo 4/5/2018 1 Rapidus Wireless
More informationQuick Installation Guide DSL-2640U/NRU. ADSL/Ethernet Router with Wi-Fi and Built-in Switch
DSL-2640U/NRU ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Wireless router DSL-2640U/NRU Power adapter RJ-11 telephone cable Straight-through Ethernet cable (CAT
More informationTable of Contents. Page ii
Table of Contents Chapter 1 Introduction 1 Features... 1 Safety Instructions... 1 Package Contents... 2 Physical Details... 3 Chapter 2 Setup 5 Overview... 5 Using the Windows Wizard... 5 Chapter 3 Web-Based
More informationModel:BL-WR Mbps Wireless N Router
Quick Installation Guide Model:BL-WR3000 300Mbps Wireless N Router 1.Connecting the device Note: Please use wired network connections only to configure the Router. 1 Connect the WAN port on your Router
More informationLongshine Technologie Europe GmbH LCS-MFP101-2 Multifunction Printserver
Longshine Technologie Europe GmbH LCS-MFP101-2 Multifunction Printserver www.longshine.de TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3
More informationABS-VAP11N Quick Setup Guide
ABS-VAP11N Quick Setup Guide SETUP 1. On the PC you will use to configure the ABS-VAP11N bridge: Disable, if present, the Wireless Network Connection (WiFi). Enable the Local Nework Connection (Ethernet)
More informationQuick Installation Guide DIR-300NRU. Wireless Router with Built-in 4-port Switch
DIR-300NRU Wireless Router with Built-in 4-port Switch BEFORE YOU BEGIN Delivery Package Wireless router DIR-300NRU Power adapter Straight-through Ethernet cable (CAT 5E) CD-ROM with User Manual and (brochure)
More informationNETWORK LAB 2 Configuring Switch Desktop
Configuring Switch 1. Select the switch tab and then add a switch from the list of switches we have to the workspace, we will choose (2950-24) switch. 2. Add a number of PCs next to the switch in order
More informationWireless USB Port Multi-Functional Printer Server. Model # AMPS240W. User s Manual. Ver. 1A
Wireless USB 2.0 1-Port Multi-Functional Printer Server Model # AMPS240W User s Manual Ver. 1A Table of Contents 1 Introduction...3 1.1 Package Contents... 3 1.2 System Requirements... 3 2 Multi-Functional
More informationA Division of Cisco Systems, Inc. GHz g. Wireless-G. User Guide. Access Point WIRELESS. WAP54G v2. Model No.
A Division of Cisco Systems, Inc. GHz 2.4 802.11g WIRELESS Wireless-G Access Point User Guide Model No. WAP54G v2 Copyright and Trademarks Specifications are subject to change without notice. Linksys is
More informationActivity Configuring and Securing a Wireless LAN in Packet Tracer
Activity Configuring and Securing a Wireless LAN in Packet Tracer Objectives: 1. Configure a Wireless Access Point (WAP) local IP address. 2. Configure a WAP with an SSID. 3. Change the administrator s
More informationNWA300 User Manual of NWA ac Ceiling AP
NWA300 User Manual of NWA300 802.11ac Ceiling AP This is the user manual of the NWA300, 11ac 1200Mbps Ceiling AP, which will approximate guide you to set and apply the AP, it provides a convenient graphical
More informationAVG INTERNET SECURITY 8.5 Installation, Configuration and Use for AARP Tax-Aide
The following pages show how to install and configure version 8.5 of the AVG Internet Security suite, including the Antivirus and Firewall components, for use on AARP purchased and donated computers used
More informationConfiguring a TPLINK Router. TP Link Archer AC1200 Basic Configuration Steps
Configuring a TPLINK Router TP Link Archer AC1200 Basic Configuration Steps Configuring Your Router STEP 1 (a): Connect Your PC to the Router Unbox the router and power up the router. Connect the Act internet
More informationLongshine Technologie Europe GmbH
Longshine Technologie Europe GmbH www.longshine.de TABLE OF CONTENTS COPYRIGHT...2 1. INTRODUCTION...3 PRODUCT OVERVIEW...3 COMPONENTS AND FEATURES...3 HARDWARE INSTALLATION...3 2. MFP SERVER INSTALLATION...5
More informationUser Manual of 5.8G Outdoor CPE
User Manual of 5.8G Outdoor CPE Version V1.2 Thank you for purchasing Enterprise High Gain Outdoor CPE. This manual will instruct you how to configure and manage this CPE, enable you to use it in a perfect
More informationBillion BiPAC 7800VDOX. Setup Guide
Billion BiPAC 7800VDOX Setup Guide MODEM REFERENCE & LIGHT STATUS SHEET On the front of your modem you will notice a number of lights. The below table explains what each of these lights mean: LABEL ACTION
More informationST-HVR8704 ST-HVR8708 ST-HVR8716. Professional Digital Video Recorders QUICK START GUIDE
ST-HVR8704 ST-HVR8708 ST-HVR8716 Professional Digital Video Recorders QUICK START GUIDE 1 Thank you for purchasing this SecurityTronix Hybrid Video Recorder! The documentation for this HVR comes in 2 formats;
More informationUser Manual. Rev:
Default Login Details Login Address: www.mykasda.com Login Password: Set up by users Default Wi-Fi SSID: Kasda xxxx KW6516 (Printed on product label) Default Wi-Fi Password: 12345678 www.kasdanet.com Rev:
More informationRANGER SERIES. 150Mbps Wireless Green Broadband Router DG-BR4000NG. 150 Mbps V
RANGER SERIES 150Mbps Wireless Green Broadband Router DG-BR4000NG N 150 Mbps V1.2 2011-12-15 FCC warning: This equipment has been tested and found to comply with the limits for a class B digital device,
More informationSetup Guide for Wi-Fi Hotspot Boosting Kit
Setup Guide for WI-KIT-02 Wi-Fi Hotspot Boosting Kit Congratulations on purchasing the WI-KIT-02, this contains everything you need to be able to connect to Wi-Fi at a camp site / marina / other location.
More informationNighthawk X4 AC2200 WiFi Range Extender
Nighthawk X4 AC2200 WiFi Range Extender Model EX7300 User Manual April 2016 202-11577-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit
More informationPart 1: Connecting to HawkNET on your Windows XP PC
Students are NOT permitted to use any device or product that extends the HawkNET network beyond the intended personal use. These restrictions include, but are not limited to, the use of personal routers,
More informationiconnect625w Copyright Disclaimer Enabling Basic Wireless Security
iconnect625w Enabling Basic Wireless Security Copyright Copyright 2006 OPEN Networks Pty Ltd. All rights reserved. The content of this manual is subject to change without notice. The information and messages
More informationRV2458 Router User Manual
RV2458 Router User Manual For Technical Assistance, please call (800) 638-3600, or visit www.magnadyne.com Contents Establish a WiFi Connection............... 3 Pair RV2400(MV2400)........................
More informationQuick Installation Guide of Acer WLAN 11b Broadband Router
Preparation 1 At lease one PC with IEEE802.11b WLAN client installed. 2 One straight-through Category 5 Ethernet cable, used to link WAN interface to xdsl or CM for Internet connection. 3 Acer WLAN 11b
More informationQuick Installation Manual
Quick Installation Manual FOR ROUTER Enterprise High Power Outdoor Wireless Access Point NETQ-6000 PC Laptop IPAD Thank you for purchasing Enterprise High Gain wireless Router. This manual will instruct
More information