I-PASOLINK Initial setting and equipment configuration

Transcription

1 I-PASOLINK Initial setting and equipment configuration 1

2 I-PASOLINK configuration and initial setup For ipasolink 1000 For ipasolink /100 Base-TX (RJ-45) Note; LCT Port supports DHCP Default IP address is TOPC-E4011E-02- ＸＸＸＸＸＸ For ipasolink 200

3 LCT COMMUNICATION INTERFACE THE LOCAL CRAFT TERMINAL IS USED TO SETUP, MONITOR AND MAINTAIN ipasolink RADIO. ipasolink SUPPLY USER GUI ENVIRONMENT THROUGH WEB BROWSER. LCT SUPPORTS BOTH LOCAL AND REMOTE CONNECTIONS LCT Port supports DHCP Default IP address is /100 Base-TX (RJ-45) SET THE PC INTERNET PROTOCOL, TCP IP PROPERTIES TO OBTAIN IP ADDRESS AUTOMATICALLY AND OBTAIN DSN SERVER ADDRESS AUTOMATICALLY COMMUNICATION BETWEEN THE LCT AND THE ipasolink IS VIA THE LCT PORT OF IDU CONNECTED BY LAN CABLE. TOPC-E4011E-02- ＸＸＸＸＸＸ 3

4 LCT Startup and Login Start the browser Internet Explorer and enter the URL to open the WebLCT Login screen. Enter the User Name and Password in the provided text boxes and Click Ok button Default Username : Admin Password: LCT main menu opens in the Current Status screen 4

5 WebLCT LOGOUT Always Logout using this button before disconnecting the cable. To Logout of the WebLCT, click on the Logout button on the top right hand of the LCT screen. When Logout Confirm window appears, Click Yes LCT Login window appears Close the Browser window to exit WebLCT. 5

6 WebLCT Initial Screen Login User Name Summary Alarm Indication Opposite Site Links Maintenance Logout Indicate the current logged in user Indicate the summary alarm of ODU, IDU, AUX I/O, TCN, & Maintenance Status Connect to opposite station (s) Maintenance ON/OFF button Logout button Block Diagram Indicate the ODU, IDU and Interfaces mounted Menu tree Detail Display Indicate the LCT Main Menu Display detail alarm & status information of items selected from the Tabs 6

7 WebLCT Initial Screen F/W Version Site (NE) Name and IP Address Opposite Site Links Indicate the current Firm Ware Version Indicate Network element name and it s IP address Connect to opposite station (s) Connecting to opposite site Click on the opposite site links and select the site to connect to. Login screen for selected opposite site open in a separate browser window 7

8 NETWORK MANAGEMENT 8

9 GENERAL SETTING 1 Select General Setting from the Network Management Configuration Menu. NE Primary IP Setting is displayed 2 1 Item Parameter IP Address Setting (Bridge 1) IP Address x.x.x.x Subnet Mask x.x.x.x Default Gateway x.x.x.x 2 Click the Setup icon, General Setting window opens. 3 Enter the Primary IP address for the NE (Bridge1), Subnet Mask, and Default Gateway for the Bridge1. See the table for details Description Input Primary IP Address of NE Input Subnet Mask Input Default Gateway IP address NMS Port Setting Connect NMS Port to NMS Yes No Use NMS Port Not use NMS Port 3 9

10 GENERAL SETTING (DETAIL) 1 of Select General Setting (Detail) from the Network Management Configuration Menu. General Setting Detail screen opens showing the network parameter setting 2 To change Network parameters, Click the Setup icon, General Setting (Detail) window opens 3 After changing/ modifying the parameters click OK button 3 10

11 GENERAL SETTING (DETAIL) 2 of 5 Item Parameter NE2 Port Setting NE2 Port IP x.x.x.x Address NE2 Port Used Usage Not Used Description Input IP Address of NE2 port used for serial back-back connection Use NE2 port Not use NE2 port NE2 Port Speed 9600 specify the line speed of NE2 port Ethernet Port Setting (NMS / NE1 Port) Usage Used Use Ethernet port Not Used Not use Ethernet port Auto Negotiation Enable Disable Discovery Usage Item Parameter Description Inband Management VLAN Setting VLAN ID 1 to 4094 VLAN ID of Inband Management VLAN Inband management Used Use Inband management VLAN VLAN usage Not Used Not use inband management function IP Address Subnet mask x.x.x.x x.x.x.x Used Not Used NE Branch Setting Branch 1 to 4 Number Branches Default x.x.x.x Gateway Restrict LCT Connection LCT Port Any Setting Only to Local NE enable the Auto Negotiation of Ethernet port Disable the Auto Negotiation of Ethernet port search of the network access machinery using Ethernet connection Select the Branch Number Input the Default Gateway Connection from Local/Remote to LCT Port only connection from Local to LCT Port Enter IP address of inband management port enter subnet mask for inband management 11

12 GENERAL SETTING (DETAIL) 3 of 5 12

13 GENERAL SETTING (DETAIL) 4 of 5 When When NE2 NE2 port port is is used used for for serial serial connection to other PASOLINK configure this NE2 Port to other PASOLINK Setting Setting Select Select Inband Inband Management Management VLAN VLAN Setting Select Select usage of of NMS NMS and and NE1 NE1 ports ports set set the the port parameters accordingly port parameters accordingly LCT LCT Port Port Setting Setting :: select select any any radio radio button button to to connect connect to to remote remote NEs. NEs. From From the the local local LCT LCT Port Port Select Select Only Only to to Local Local NE NE radio radio button button to to prevent prevent connection connection to remote NE from local LCT port. remote NE from local LCT port. 13

14 GENERAL SETTING (detail) 5 of 5 Select the number of branches the NE belongs to Enter the Bridge 2, IP address and Subnet Mask Select to which branch NMS port belongs to Select to which branch Modem-2 port belongs to 14

15 ROUTING SETTING 15