Flexible. Powerful. Future-proof.

Transcription

1 Sheet Modular Industrial Router MRX Flexible. Powerful. Future-proof. MRX3 LAN MRX3 DSL MRX5 LTE M2M Communication Technology that adjusts to your needs Changing demands requires flexible solutions. Modularity is the answer to this challenge. The new MRX industrial router series provides you with the necessary scope for developing futureand investment-proof applications and adjust them if required. This results in an optimum cost/performance ratio and extended service life. Like all routers of INSYS icom, this fully-modular platform is characterised by very high system stability, longevity and consistent user guidance. VPN, a stateful firewall and further IT security features are integrated. An integrated Linux programming environment (icom SmartBox) based on LXC technology is available to run programs and scripts (edge computing). The new MRX series is available in two basic variants, LAN and LTE, each in two housing widths. It can be tailored to the application using various plug-in cards (MRcards) that can also be developed customer-specific. Highlights Integrated Linux programming environment for edge computing (icom SmartBox) Several VPN tunnels can be used in parallel Firewall in tunnel Segmentation in several local IP networks Flexible administration with profile manager Extended event-based control (e.g. profiles, connections, redundancy) Access control via user roles High performance for broadband networks and high VPN data rate Quick start for INSYS Connectivity Service Housing Widths MRX3: MRX5: Basic Variants 3 slots, 2 of them preallocated 5 slots, 2 of them preallocated MRX LTE: Base card + 4G card MRX DSL: Base card + DSL card MRX LAN: Base card + power card MRcard ES MRcard PL MRcard PD MRcard SI 4-Port Switch (10/100 MBit) LTE UMTS/HSPA GPRS/EDGE VDSL2 ADSL/2/2+ 2 variants (-A, -B) RS232 RS485 2 switch outputs

2 Sheet MRX (Basic Variants) Mobile communication (only MRX LTE) Frequency bands Antenna connection SIM Wired VDSL/ADSL communication (only MRX DSL) DSL-Standards DSL connection Router Security Redundancy 4G/LTE*: 800, 900, 1,800, 2,100, 2,600 MHz; LTE Cat. 3 (DL: 100 Mbps, UL: 50 Mbps) 3G/UMTS/HSPA: 900, 1,800, 2,100 MHz; UMTS, HSPA+ (DL Cat. 24, UL Cat. 6) 2G/GPRS/EDGE: 900,1,800 MHz; GPRS/EDGE Class 12 2x SMA (2G/3G/4G: Main, 3G: Rx Diversity, LTE: MIMO) Slot for 1 Mini-SIM card (2FF), locked MRX DSL-A (Annex A): VDSL2 G Profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a. 30a, VDSL2 Vectoring G ADSL/ADSL2/ADSL2+ G Annex A, G Annex A/L/M, G Annex A and M, T1.413 MRX DSL-B (Annex B): VDSL2 G Profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a. 30a, VDSL2 Vectoring G ADSL/ADSL2/ADSL2+ G Annex B, G Annex B, G Annex B and J RJ45-Clinch Up to 5 IP networks local (LAN) or as WAN (separated via VLAN); own DHCP server per IP network, static routing, routing priority configurable; netfilters: DNAT, SNAT, IP forwarding, netmapping, port forwarding, IP filters (stateful Firewall), DNS relay, dyndns support, PPPoE for external DSL modem OpenVPN (client and server), IP filters (stateful firewall) also in VPN tunnel, several VPN tunnels in parallel possible, IPsec and GRE WAN chains: several WAN accesses configurable (prioritised and event-controlled), WAN groups: parallel operation of WAN interfaces or VPNs, several OpenVPN servers, additional redundancy via further MRcards Ethernet switch, interfaces Ports 5 x RJ45, 10/100 MBit/s, Full/half duplex, Auto MDI-X, 1.5 kv isolation voltage Each port can be freely assigned to the IP networks, Link up/down detection, Configuration port Inputs, 1x low-active, 1x high-active (as per EN , Type 1) Events (selection) Change: input, Ethernet port, WAN chain, profile, supply input, cellular field strength; timer expiry, firewall violation, login attempt detection, detection of digital input pulses Event-controlled actions (selection) Messages via , SMS, SNMP traps, start timer, profile switching, connection switching, reset, log out/turn off modem, activate firmware Operation Wizard Connection configuration incl. VPN, INSYS Connectivity Service, further LAN networks Help Web interface with inline help texts, online help, FAQ, exemplary profiles, plausibility check Configuration Web interface local and remote (http, https; with session management), Command line interface (CLI), Telnet, SSH, ASCII and binary file (also for backup), configuration management with switchable profiles (event-controlled) Power, WAN (Internet connection), Info (configurable), Signal (for cellular radio), DSL (for DSL) Authentication Several users, different user roles and rights, RADIUS Diagnosis Comprehensive log files, support package, integrated help functions, Diagnosis tools: ping, tcpdump, traceroute, DNS lookup, AT commands Firmware updates Incremental, failsafe, automated via update server (http, ftp, https, ftps) Edge Computing icom SmartBox Linux programming environment: Setup of LXC containers for programs and scripts (apps), ARMv7 CPU, 192 MB RAM, 2 GB flash memory Additional features NTP client and server, buffered real-time clock * Please check the availability of the LTE frequencies in the planned operating area. Above specified frequencies are currently used in Europe, Middle East, Africa and, to some extent, in the Asia-Pacific region and South America.

3 MRcards Voltag V DC (± 20%), 2 supply connections with changeover detection Terminals 5-pin push-in terminal connectors (maintenance free), rigid/flexible conductors up to 2.5 mm 2 (basic variants without further MRcards) Enviroment conditions MRX LAN: typical approx. 2.0 W, max. 3.5 W MRX LTE: typical approx. 2.5 W, max. 8.0 W (depending on data throughput amongst others) Dimensions (WxDxH) MRX3: 82 x 88 x 117 mm MRX5: 136 x 88 x 117 mm operating temperature MRX LAN, MRX LTE C, C under limited conditions (further more on operating temperature MRX DSL C C Basic variants or with additional MRcards ES and MRcards SI C under limited conditions (further more on Humidity % (non condensing) Mounting / Protection class Mounting on DIN rail / housing: IP40, terminals: IP30 Approvals & Standards CE, MRX LAN additionally: FCC Part 15 Class B, IC EMC Emission: EN Class B; Immunity: EN , EN Security EN / EN Environmental conditions Vibration/shock as per PLC standard EN und EN , EN ; Temperature tests as per: EN , EN , EN , EN MRcard ES Ethernet switch Ports 4 x RJ45, 10/100 MBit/s, Full/half duplex, Auto MDI-X, 1.5 kv isolation voltage Each port can be freely assigned to the IP networks, Link loss detection Supplied via MRX Typical approx. 1.0 W, max. 1.5 W MRcard PL Mobile communication Frequency bands Antenna connection SIM Inputs 4G/LTE*: 800, 900, 1,800, 2,100, 2,600 MHz; LTE Cat. 3 (DL: 100 Mbps, UL: 50 Mbps) 3G/UMTS/HSPA: 900, 1,800, 2,100 MHz; UMTS, HSPA+ (DL Cat. 24, UL Cat. 6) 2G/GPRS/EDGE: 900/1,800 MHz; GPRS/EDGE Class 12 2x SMA female (2G/3G/4G: Main, 3G: Rx Diversity, LTE: MIMO) Slot for 1 Mini-SIM card (2FF), locked for configurable actions: 1x low-active, 1x high-active (as per EN , Type 1) Power, WAN (internet connection), Signal (mobile connection), Info (configurable) Supplied via MRX, 2 further supply connections optional (redundancy) V DC (± 20%) Typical approx. 1.0 W, max. 5.0 W

4 MRcards MRcard PD (VDSL/ADSL) wired VDSL/ADSL-communication DSL standards DSL connection Inputs MRcard PD-A (Annex A): VDSL2 G Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a. 30a, VDSL2 Vectoring G ADSL/ADSL2/ADSL2+ G Annex A, G Annex A/L/M, G Annex A and M, T1.413 MRcard PD-B (Annex B): VDSL2 G Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a. 30a, VDSL2 Vectoring G ADSL/ADSL2/ADSL2+ G Annex B, G Annex B, G Annex B and J RJ45-Clinch for configurable actions: 1x low-active, 1x high-active (as per EN , Type 1) Power, WAN (Internet connection), Info (configurable), DSL Supplied via MRX, 2 more supply connections optional (Redundant) V DC (± 20%) ca. 5.0 W CE MRcard SI Serial interface RS232 (Serial1) RS485 (Serial2) s USB 2.0 Inputs/Outputs Digital inputs digital outputs 1 x RS232/D-Sub-9(m) Terminal connector (D+, D-, GND), termination and bias via DIP switch Serial Ethernet gateway (incoming and outgoing connections, Modbus TCP/RTU gateway, modem emulation, editable AT answer file, conversion of phone numbers into IP addresses) Prepared, USB 2.0 host, socket type A, output current max. 200 ma 2x via terminals, activated by connection to GND, can be monitored with an event 2x via terminals, potential-free change-over relay, can be operated by an action Condition of digital inputs and outputs Supplied via MRX Typical approx. 1.0 W, max. 2.5 W Terminals Push-in terminal connectors (maintenance free), rigid/flexible conductors up to 2.5 mm 2 Inputs/outputs: 2x 5-pin, RS485: 3-pin

5 Order Numbers, Accessories MRX Product description Features Order number MRX3 LAN 5 Ethernet ports, 2 inputs, 1 free MRcard slot MRX5 LAN 5 Ethernet ports, 2 inputs, 3 free MRcard slots MRX3 LTE Cellular radio (4G/3G/2G), 5 Ethernet ports, 2 inputs, 1 free MRcard slot MRX5 LTE MRX3 DSL * MRX5 DSL * Cellular radio (4G/3G/2G), 5 Ethernet ports, 2 inputs, 3 free MRcard slots VDSL2, ADSL/2/2+, 2 Inputs, 5 Ethernet ports, 1 free MRcard slot VDSL2, ADSL/2/2+, 2 inputs, 5 Ethernet ports, 3 free MRcard slots Annex A: Annex J/B: Annex A: Annex J/B: MRcard PL Cellular radio (LTE/HSPA/UMTS/EDGE/GRPS), MRcard ES 4-port switch (10/100 Mbit) MRcard PD * VDSL2, ADSL/2/2+, Annex A: Annex J/B: MRcard SI RS232, RS485, USB 2.0,, 2 switch outputs * available by 2017 June Suitable accessories Product description Description Order number/information LTE magnetic base antenna GSM/UMTS/LTE; frequencies (MHz): 800, 900, 1800, 2100, LTE outside mounted antenna GSM/UMTS/LTE; frequencies (MHz): 800, 900, 1800, 2100, Antenna extension 5 m; device connection: SMA (f), antenna connection: SMA (m) Antenna extension 10 m; device connection: SMA (f), antenna connection: SMA (m) Antenna extension 15 m; device connection: SMA (f), antenna connection: SMA (m) Power supply unit TDK Lambda DSP AC/DC power supply unit for DIN rail INSYS Connectivity Service VPN Service for M2M Applications insys-icom.com/connectivity M2M SIM cards Cards, management portals, etc. insys-icom.com/m2m-sim Migration from INSYS OS to icom OS: We gladly support you! INSYS Sandbox You use our MoRoS, EBW or IMON routers, running the operating system INSYS OS? icom SmartBox icom OS We gladly support you in the migration to our MRX router series, running the operating system icom OS. Ask for our detailed whitepaper, join our technical trainings or benefit from our customer services for adapting the configuration or migrating Linux applications to the icom SmartBox. Further informationen: /knowledge/os-migration INSYS Subject to technical changes and correction INSYS MICROELECTRONICS GmbH Hermann-Köhl-Str. 22 D Regensburg Phone Fax info@insys-icom.com