Power over Ethernet Optimal Power Solution anywhere

Transcription

1 28 Optimal Solution anywhere 29 Office VoIP Phone, Wireless AP & IP Surveillance power deployment solution IP Telephony PLAET IEEE 802.3af compliant IP phones can be installed without requirement of an additional power cable because the power can be provide from the standard Ethernet cable. IP Telephony becomes more reliable and cheaper to install, which helps enterprises save tremendous cost when upgrading to IP Telephony communications infrastructure. Wireless & IP Surveillance While video surveillance system becomes more and more important for visible security in the office or public area, the IP cameras with function would be a lot helpful for the surveillance deployment and wireless AP when the power outlet not easily found in the ceiling or in the outdoor. The IP camera or Wireless AP can be installed anywhere it is needed regardless of the restrictions of power outlet locations. PLAET solution helps enterprise to create an integrated data, voice and powered network. Investment protection of existing Ethernet switches Simplify the installation of network appliances and cabling infrastructure Flexible network deployment Safe powering of standard compliant as well as legacy devices Centralize power delivery and management IP Camera Wireless Access Point 11b/g/n AP 60 Watts Comprehensive Evolutionary Input 15Watts >> atts >> 60Watts Laptop WiFi-Phone Smart Pad Laptop Port Security IP/M L Internet Router Managed Switch SMB IP office Public/Server Groups VoIP Phone Management Client Train Station Office Campus Switch SSL / Telenet /Web IP PBX Data Server Printer Server IP DSCP QoS usage status 100Base-TX UTP with 1000Base-T UTP 100Base-TX UTP Highway Factory 2.4GHz n Suburb

2 30 31 Full Managed 802.3at + Switch To satisfy the network applications requiring higher power supply with speed transmission, the Full Managed 802.3at + Switch that provides user-friendly but advanced IPv6 / IPv4 management interfaces to bring out efficient centralized High management. The Full Managed 802.3at + Switch features both IEEE 802.3af (15.4W) and High IEEE 802.3at 10 / 100 / 1000 Base-T (30.8W) available on all ports to satisfy the increasing needs of power consumption by powered devices such as 11a/g/n high transmission wireless access points (AP), security PTZ (Speed Dome) network video cameras, thin-clients and etc. Complies with IEEE 802.3at / af over Ethernet End-Span PSE Supports up to 30.8 Watts for each ports Remote power management and monitor Schedule supports IEEE 802.1Q VLA / Private VLA / Q-in-Q / Voice VLA Layer 2 / 3 / 4 Access Control List IEEE 802.1D / 1w / 1s Spanning Tree Protocol IGMP Snooping v1, v2 & v3 and Querier mode Management interface Console / Telnet / IPv6 & IPv4 Web / SMP v1, v2c & v3 / SSL / SSH DHCP Snooping / ARP Inspection and IP Source Guard DHCP Relay / DHCP Option 82 Managed 802.3at + Switch 10/100 WGSD-10020HP / at 100/1000Base-X x 2 Ports 150Watts Budget, up to 8 WGSW-20160HP / at injector x 16 Ports 2atts Budget, up to 16 SGSW-24040HP / at 360Watts Budget, up to 24 Hardware Stacking up to 16 units FGSD-1022HP 10/100Base-TX with IEEE 802.3af / at 150Watts Budget, up to 8 Full Managed 802.3af Switch WGSW Series / SGSW Series Full Managed 802.3af Switch is perfectly designed for SMB and SOHO network construction and it provides 24-Port Ethernet with 802.3af ports. Besides the userfriendly but advanced IPv6 / IPv4 management interfaces and abundant L2 / L4 switching functions, the Full Managed 802.3af Switch applies high speed and reliable office network environment. It is quite suitable for next generation network deployment and offers the lowest total cost of ownership. It is the best investment for business expanding or upgrading its network infrastructure. Complies with IEEE 802.3af End-Span PSE Supports up to 15.4 Watts for each ports Remote power management and monitor Supports Schedule IEEE 802.1Q VLA / Private VLA / Q-in-Q / Voice VLA Layer 2 / 3 / 4 Access Control List IEEE 802.1D / 1w / 1s Spanning Tree Protocol IGMP Snooping v1, v2 & v3 and Querier mode Management interface Console / Telnet / IPv6 & IPv4 Web / SMP v1, v2c & v3 / SSL / SSH DHCP Snooping / ARP Inspection and IP Source Guard DHCP Relay / DHCP Option 82 IP / Hardware Stacking management up to 16 units PLAET Schedule for Saving 15.4W 10/ WGSW-28040P 180Watts Budget, up to 24 IP Stacking supports WGSW-28040P4 380Watts Budget, up to 24 IP Stacking supports SGSW-24040P 220Watts Budget, up to 24 Hardware Stacking supports SGSW-24040P4 380Watts Budget, up to 24 Hardware Stacking supports The 8 / / 100 Base-TX ports in the Managed 802.3at + Switch support both 802.3af and 802.3at standards and allows users flexibly connect standard and high powered devices simultaneously. To facilitate power management, the Managed 802.3at + Switch is implemented powerful management features such as over temperature protection, usage threshold alert and auto power allocate to prevent power budget overloading. The power budget can be allocated by priorities or classification and sent alert event logs when power usage reaches the defined threshold. WGSW-2620HP 10/100Base-TX with IEEE 802.3af / at 360Watts Budget, up to 24 AM 08:00 PM 05:00 SGSW-24040P PM 05:00 AM 08:00 SGSW-24040P Complies with IEEE 802.3af / at over Ethernet End-Span PSE Supports up to 30.8 Watts for each ports Remote power management and monitor IEEE 802.1Q VLA / Private VLA / Q-in-Q Schedule Layer 3 / 4 Access Control List IEEE 802.1D / 1w Spanning Tree Protocol IGMP Snooping v1 & v2 Management interface Console / Telnet / Web / SMP v1, v2c & v3 / SSL 6 Watts 6 Watts 12 Watts 12 Watts Total consumed 36Watts / hr Off Off Off 6 Watts 6 Watts 12 Watts 12 Watts Save 24Watts / hr during off-business hours Total Saved = 10800Watts / month 100Base-TX UTP with

3 32 33 Managed 802.3af Switch FGSD / FGSW Series Web-Smart 802.3af Switch FGSD-1022P FSD-804PS 10/100Base-TX with IEEE 802.3af 180Watts Budget, up to 8 10/100Base-TX with IEEE 802.3af injector x 4 Ports 10/100Base-TX x 4 Ports 55Watts Budget, up to 4 FGSW-2612PVM FSW-1608PS The Managed 802.3af Switch features IEEE 802.3af () function, which optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and security video cameras. The Managed 802.3af Switch offers each port contains 15.4watts power output. IEEE 802.3af capabilities reduce installation costs of add-in network productivity devices. It frees the wireless AP deployment from restrictions of power outlet locations. With features, power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional wiring and reducing installation time. Complies with IEEE 802.3af End-Span PSE Supports up to 15.4 Watts for each ports Remote power management and monitor IEEE 802.1Q VLA / Private VLA / Q-in-Q Layer 3 / 4 Access Control List IEEE 802.1D / 1w Spanning Tree Protocol IGMP Snooping v1 & v2 Management interface Console / Telnet / Web / SMP v1, v2c & v3 / SSL 15.4W 10/100 10/100Base-TX with IEEE 802.3af injector x 12 Ports 10/100/1000Base-T x 12 Ports 110Watts Budget, up to 12 FGSW-2620PVM 10/100Base-TX with IEEE 802.3af 190Watts Budget, up to 24 FGSW-2620VMP4 10/100Base-TX with IEEE 802.3af 380Watts Budget, up to 24 The Web-Smart 802.3af switch is an ideal Switch providing cost-effectiveness advantage to local area network and widely accepted in SMB office network. It provides intelligent Layer 2 data packet switching and management functions, friendly web user interface, stable operating and also complies () with affordable price. The Web-Smart 802.3af switch features 4-Port to 24-Port choices to fulfill the varied needs of customers. It offers a rackmountable, affordable, safe and reliable power solution for SMB deploying VoIP systems and wireless networks, or requiring enhanced data security and network traffic management. For efficient management, the Web-Smart 802.3af switch is equipped with friendly Web interface for remote monitoring. It can be programmed for advanced switching functions such as port configuration, 802.1Q VLA, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and M address / TCP & UDP filter. Complies with IEEE 802.3af End-Span PSE Supports up to 15.4 Watts for each ports IEEE 802.1Q VLA / Port-Based VLA Layer 3 / 4 Access Control List Broadcast Storm Control Web Management interface 10/100Base-TX with IEEE 802.3af 10/100Base-TX x 8 Ports 110Watts Budget, up to 8 FSW-1828PS 10/100Base-TX with IEEE 802.3af 10/100Base-TX x 8 Ports 110Watts Budget, up to 8 FSW-2400PS 10/100Base-TX with IEEE 802.3af 125Watts Budget, up to 24 GSD-802PS PLAET Priority for Critical Services - Example on VoIP System o Priority With Priority on-stop Operating via System - Example on Surveillance System Managment 100Base-TX UTP with 120Watts Budget, up to 8 Over Loaded Over Loaded Management PC 100Base-TX UTP Line () Fast Ethernet Switch ed ot ed ot ed ed Breakdown UPS Low Priority High Priority IP Camera X IP Camera X Locations of o Socket IP Camera Camera Locations of Un-regulated Supply ot critical mission device Critical mission device ot critical mission device Critical mission device 100Base-TX UTP with

4 34 35 Unmanaged / + Switch Centralized Distribution for Ethernet etworking The Unmanaged Switch will be an ideal switch for small business and workgroups to deploy the network like wireless access points, IP-based surveillance camera or IP phones in any places easily and efficiently. The Unmanaged Switch also provides a simple, cost-effective, and non-blocking wire-speed performance for deployment in rack environment, SOHO office or department network application. Easy and Cost-effective etwork Deployment Each of the injector ports in the Unmanaged Switch can transmit power along with data over a single Ethernet cable to remote powered device at the distance up to 100 meters with no need of software configuration. The Unmanaged Switch shall reduce the need of cables and dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs, simplify the installation effort and eliminate the need for electricians or extension cords. Complies with IEEE 802.3af or at End-Span PSE Supports up to 15.4 or 30.8Watts for each port Remote power feeding up to 100m Auto detect powered device (PD) Auto-egotiation and Auto MDI/MDI-X Automatic address learning and address aging 802.3af Injector Hub Quick and Easy etwork Deployment The 802.3af Injector Hub is a 4 / 12 / 24-Port IEEE 802.3af injector hub and complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. This device supports full 48VDC power for any remote IEEE 802.3af powered device (PD) like Wireless LA Access Point, IP phone, and IP Camera. The 802.3af Injector Hub is installed between a regular Ethernet Switch and the powered devices, injecting power without affecting the data transmission. It offers a cost effective and quick solution to upgrade network system to IEEE 802.3af system without replacing the existing Ethernet Switch. Easy Cabling Installation The 802.3af Injector Hub is installed between a regular Ethernet Switch and the powered devices; it injects power to the PDs without affecting the data transmission performance. It offers a cost effective and quick solution to upgrade network system to IEEE 802.3af system without replacing the existing Ethernet Switch. Complies with IEEE 802.3af Mid-Span PSE power up to 15.4 Watts for each port Remote power feeding up to 100m Full power support for each port Automatically detect the powered device (PD) Indication of LED indicator power input 100~240V, 50/60Hz, universal power supply FSD-804P FSD-808P FSD-808HP POE /100Base-TX with IEEE 802.3af injector x 4 Ports 10/100Base-TX x 4 Ports 55Watts Budget, up to 4 10/100Base-TX with IEEE 802.3af 125Watts Budget, up to 8 10/100Base-TX with IEEE 802.3af / at 140Watts Budget, up to 8 10/100Base-TX Data Input x 4 Ports 10/100Base-TX Data + Output x 4 Ports 60Watts Budget, up to 4 GSD-804P GSD-808HP GSD-808HP2 POE-1200 POE-1200P2 POE-1200G injector x 4 Ports 55Watts Budget, up to 4 / at 1atts Budget, up to 8 OTP / at 240Watts Budget, up to 8 OTP 10/100Base-TX Data Input x 12 Ports 10/100Base-TX Data + Output x 12 Ports 110Watts Budget, up to 12 SMP Trap 10/100Base-TX Data Input x 12 Ports 10/100Base-TX Data + Output x 12 Ports 190Watts Budget, up to 12 SMP Trap 10/100/1000Base-T Data Input x 12 Ports 10/100/1000Base-T Data + Output x 12 Ports 190Watts Budget, up to 12 SMP Trap Schedule FSW-1600P PLAET Over Temperature Protection (O.T.P.) POE-2400 POE-2400P4 POE-2400G 10/100Base-TX with IEEE 802.3af injector x 16 Ports 125Watts Budget, up to Watts 90Watts 40 C 50 C 10/100Base-TX Data Input x 24 Ports 10/100Base-TX Data + Output x 24 Ports 220Watts Budget, up to 24 SMP Trap 10/100Base-TX Data Input x 24 Ports 10/100Base-TX Data + Output x 24 Ports 380Watts Budget, up to 24 SMP Trap 10/100/1000Base-T Data Input x 24 Ports 10/100/1000Base-T Data + Output x 24 Ports 380Watts Budget, up to 24 SMP Trap Schedule High Priority Low Priority

5 at + Injector Hub HPOE Series 802.3af Single-Port Injector / Splitter POE Series Till today, the IEEE 802.3af Standard has become popular yet the demand still grows for increasing network-powered applications. With many critical applications increases, the demand of higher power appears. Hence, the IEEE 802.3at standard is defined to allow delivery of maximum up to 30.8 Watts input power to per device. The IEEE 802.3at standard is an ideal solution to fulfill the high power requirements directly via the RJ-45 Port interface. Compliant with IEEE 802.3at, the 802.3at + Injector Hub possesses stronger power capability than the existing 802.3af PSE. The 802.3af Single-Port Injector follows IEEE 802.3af standard to inserts DC 48 Voltage into Cat.5 cable, allowing the cable between the Injector and Splitter to transfer data and power simultaneously. The maximum distance between the Injector and Splitter is 100 meters. For the cost saving and power management purpose, the 802.3af Single-Port Injector is the ideal IEEE 802.3af device that splits the 48V DC over the Ethernet cable into 5V/12V DC power output. What s more, upon any IEEE 802.3af devices being installed, the 802.3af Single-Port Injector or together with 802.3af Single-Port Splitter can make the connection while migrating or splitting the power and the Ethernet digital packets, such as connecting the 802.3af Single-Port Injector to an IEEE 802.3af complied devices, AP or IP phone. IEEE 802.3at and IEEE 802.3af Mid-Span PSE power up to 30.8 Watts (802.3at ) / 15.4 Watts (802.3af ) for each port Remote power feeding up to 100m Full power support for each port Automatically detect the powered device (PD) Indication of LED indicator power input 100~240V, 50/60Hz, universal power supply Complies with IEEE 802.3af Data and power transmission distance up to 100 meters Maximum power up to 15.4 Watts Auto-detect of IEEE 802.3af equipment and devices from being damaged by incorrect installation HPOE-460 HPOE-1200G HPOE-2400G FTP-802/802S15 POE-151 POE /100/1000Base-T Data Input x 4 Ports 10/100/1000Base-T Data + Output x 4 Ports 120Watts Budget, up to 4 10/100/1000Base-T Data Input x 12 Ports 10/100/1000Base-T Data + Output x 12 Ports 340Watts Budget, up to 12 SMP Trap Schedule 10/100/1000Base-T Data Input x 24 Ports 10/100/1000Base-T Data + Output x 24 Ports 460Watts Budget, up to 24 SMP Trap Schedule 10/100Base-TX Data + Output x 100Base-FX Data Input x End-Span PSE 10/100Base-TX Data Input x 10/100Base-TX Data + Output x 10/100/1000Base-T Data Input x 10/100/1000Base-T Data + Output x End-Span PSE Extender POE-E Series Extender is a newly designed and simple device which extends both the reach of Ethernet Data and over the standard 100m (328 ft.) CAT5e/6 UTP cable to 200m, 300m or longer distance. POE /100Base-TX Data Input x 10/100Base-TX Data + Output x Pre-Standard POE-151S 10/100Base-TX Data Output x 10/100Base-TX Data + Input x Output: 5V / 12V DC, Max. 2A POE-152S 10/100/1000Base-T Data Output x 10/100/1000Base-T Data + Input x Output: 5V / 12V DC, Max. 2A Extends the range of an additional 100 meters (328ft.) Forwards both Ethernet data and power to remote devices Multiple units, daisy-chain installation support o external power cable required for installation Compact size, Wall-Mountable design Plug-and-Play POE-E101 10/100Base-TX Data + Output x 10/100Base-TX Data + Input x Complies with IEEE 802.3af Mid-Span Maximum extender distance up to 300m POE-E201 10/100/1000Base-T Data + Output x 10/100/1000Base-T Data + Input x Complies with IEEE 802.3af / at Mid-Span Maximum extender distance up to 500m POE-100S 10/100Base-TX Data Output x 10/100Base-TX Data + Input x Output: 5V / 9V / 12V DC, Max. 2A

6 at + Single-Port Injector / Splitter POE / IPOE / GTP Series The 802.3at + Single-Port Injector follows IEEE 802.3at standard to inserts DC 56 Voltage into Cat.5 cable, allowing the cable between the Injector and Splitter to transfer data and power simultaneously. The maximum distance between the Injector and Splitter is 100 meters. For the cost saving and power management purpose, the 802.3at + Single-Port Injector is the ideal IEEE 802.3at device that splits the 56V DC over the Ethernet cable into 12V/24V DC power output. Complies with IEEE 802.3af / at Data and power transmission distance up to 100 meters Maximum power up to 30.8 Watts Auto-detect of + IEEE 802.3at equipment and devices from being damaged by incorrect installation GTP-802/802S/805A 10/100/1000Base-T Data + Output x 1000Base-X Data Input x POE /100/1000Base-T Data Input x 10/100/1000Base-T Data + Output x POE-162S 10/100/1000Base-T Data Output x 10/100/1000Base-T Data + Input x Output: 12V / 24V DC, Max. 5A IGTP-805AT 100/1000Base-X Single / Multi mode LC (SFP Interface) Link Fault Pass Through (LFP) Supports -40 to 75 Degree C Operating Temperature IP30Metal Case / DI Rail and Wall Mount Design IPOE-162 Complies with 10/100/1000Base-T 24V / DC 24V to 48V Redundant -40 to 75 Degree C Operating Temperature IP30Metal Case / DI Rail and Wall Mount Design IPOE-162S Complies with 10/100/1000Base-T 12V / 24V DC Output by DIP Switch -40 to 75 Degree C Operating Temperature IP30Metal Case / DI Rail and Wall Mount Design