Wireless Ethernet as Easy as Power, Point & Play. Fiber Optic Copper Wireless

Transcription

1 Wireless Ethernet as Easy as, Point & Play Fiber Optic Copper Wireless

2 Wireless Ethernet transmission made easy., Point and Play. up and point the units and start transmitting Ethernet. The ComNet NetWave line consists of an easy, pre-packaged Point-to-Point kit that contains everything you need to establish remote connectivity to Ethernet edge devices. Also available are Point-to-Multipoint models that allow multiple client/camera/networked edge device locations to connect to a single access point. NetWave will support throughput of up to 240Mbps in a single radio version and 145Mbps in the dual radio models and supports a wide range of Ethernet devices. NetWave is secure and uses encryption to prevent unauthorized access to the network. The industrially hardened units also offer the option to be powered by the included Injector or by an IEEE 802.3af/at switch. Features Two Wireless Solutions available: - Commercial Grade for indoor environments - Industrial Grade for outdoor environments Up to +26 dbm RF output power 5 GHz and 2.4GHz Secure transmission: WPA2 AES or TKIP encryption Exclusive ComNet Antenna alignment feature eases installation and setup Distance adjustments for long-range transmission Optional antennas available for added configuration flexibility IEEE 802.3af/at (PD) compliant Support for industrial models Meets class IP67 dust and water ingress protection standards for industrial models Lifetime Warranty Point and Play With the NetWave NWK point-to-point kit, it really is that simple! Scan this QR Code to view a video of the quick and easy installation process, or visit :

3 A Complete Point-to-Point Wireless Ethernet Solution These preconfigured kits include a factory-paired Access Point and Client, plus the power supplies and mounting equipment to install and connect them. The NetWave NWK series is a complete package containing everything you need to transmit a single Ethernet data stream between a Client remote location and the Access Point or head end. The NWK series is available as either a hardened or commercial solution. Simple, easy to use visual indicators show when the antennas are correctly aligned and link established. The NWK1, NWK2, and NWK7[E] models may be powered from a source. Kit Includes Client (Remote Unit) Access Point (Head End Unit) 17 dbi Internal Antenna included with commercial units 19 dbi Internal Antenna included with industrial units Two 24-48VDC and 24VAC Passive Injectors included with industrial NWK1, NWK2 or NWK7[E] kit Industrial units can optionally be powered by an IEEE 802.3at/af Switch Two 24VDC Passive Injectors included with the commercial NWK3 or NWK4 kit Two Supplies Two Mounting Hardware Assemblies NetWave Wireless Ethernet Point-to-Point Kits Product Group NWK1 NWK3 NWK5 Client Access Point NWK7 Indoor / Outdoor Outdoor Indoor Outdoor Indoor Outdoor Industrial Yes No Yes No Yes Commercial No Yes No Yes No Operating Temp Range -40 to +75 C -10 to +65 C -40 to +75 C -10 to +65 C -40 to +75 C PIM* or PIM* PIM* or PIM* PIM* or IP67 Enclosure Yes No Yes No Yes Antenna Alignment LED Feature Yes Yes Yes Yes Yes Distance 2 mi / 3.2 km 2 mi / 3.2 km 2 mi / 3.2 km 2 mi / 3.2 km 2 mi / 3.2 km Internal Dual Polarized Directional Antenna / Beamwidth 19dBi / 17º 17dBi / 30º 19dBi / 17º 17dBi / 30º 19dBi / 17º Throughput 95 Mbps 95 Mbps 95 Mbps 95 Mbps Application Hardened Point-to-Point Point-to-Point Indoor/Outdoor Point-to-Point 240 Mbps Total Throughput Hardened Point-to-Point Yes Yes Yes Yes This reference chart refers to FCC NetWave models. For ETSI models, please refer to the appropriate data sheets or contact ComNet s International Design Center. * PIM = Injection Module Kit Based Solutions See a comprehensive list of possible equipment combinations for your wireless application needs. Scan this QR Code to see our Kit Based Solutions guide, or visit: Still Have Questions? Call ComNet s Design Center at 1 (888) in North America or +44 (0) worldwide. Or designcenter@comnet.net

4 Point-to-Multipoint The NetWave NW series user-configurable units can be configured through the embedded User Interface as a Client or as an Access Point. The NetWave NW series are available as hardened NW1 and NW2 models, and commercial NW3 and NW4 models and region-specific models for North America and Europe. These point-to-multipoint models allow multiple Ethernet endpoints to be connected to a central Access Point. An easy to read LED array displays unit operational status along with received signal strength ensuring optimal installation and operation. The NW1 and NW2 models may be powered from a source. Features Internal Antenna: 17 dbi 30º Beam width for commercial version 19 dbi 17º Beam width for industrial version 8 dbi 70º Beam width available optional for both Operating band 5 GHz Transmit power: +26 dbm External antenna optional for industrial version Industrial NW1 or NW2 models can be powered by 24 to 48VDC or 24VAC Passive Injectors, or by an IEEE 802.3at/af Switch Commercial NW3 or NW4 models power from 24VDC Passive Injectors 24VDC Typical Point-to-Multipoint Application NW3 (Client) Passive Injector IP 24VDC 24VDC PC DVR ComNet Managed Switch LEGEND Passive Injector NW3/IA870 (Recommended Access Point) NW3 (Client) Passive Injector 24VDC IP WIRELESS CAT5 Ordering Information Part No. Description Part No. Description NW1 NW2 Industrial Point-to-Multipoint Unit (FCC NA Region) Industrial Point-to-Multipoint Unit (ETSI EU Region) NW3 NW4 NW3 (Client) Passive Injector Commercial Point-to-Multipoint Unit (FCC NA Region) Commercial Point-to-Multipoint Unit (ETSI EU Region) /IA870 8dBi 70º internal antenna option /EXA External antenna option (NW1/2 only) IP Case Study ComNet s NetWave supports the Vietnam Veterans Traveling Wall. Scan this QR Code to read the full case study, or visit:

5 High Throughput The NetWave NW7[E] environmentally hardened High Throughput (HT) wireless Ethernet transmission device can be configured through the embedded User Interface as a Client or as an Access Point. This single radio model was designed for high throughput point-to-point or multi-point applications and comes with an integrated 19dBi, 17º beamwidth antenna. Features High throughput using MIMO technology: - Up to 180 Mbps in one direction - Up to 240 Mbps total full duplex High Throughput Back Haul Link for installations that require connecting to more than one Ethernet device Over current protection and 3 layers of Ethernet surge suppression on the PD port Can be powered by 24-48VDC or 24VAC Passive Injectors, or by an IEEE 802.3at/af Switch One internal 19dBi 17 beamwidth directional antenna Port 1 Supports 802.3at PD, Port 2 provides IEEE802.3at PSE Includes power injection module, power supply and mounting assembly High Throughput Point-to-Point Topology (Shown with s) Ethernet ComNet Gigabit Managed Switch providing 30W Connected to Network 1Gbps Ethernet NW7 (Access Point) P1 NW7 (Client) P1 1Gbps Ethernet ComNet Gigabit Managed Switch providing 30W Ethernet. LEGEND WIRELESS CAT5 POWER ETHERNET P1 P2 PORT 1 PD PORT 2 PSE Ordering Information Part No. NW7 NW7E /IA870 /EXA Description Industrial Single Radio, 2 Gbps Ethernet Ports (FCC NA Region) Industrial Single Radio, 2 Gbps Ethernet Ports (ETSI EU Region) 8dBi 70º internal antenna option External antenna option The Possibilities Are Endless ComNet s NetWave wireless Ethernet Products create a network that s as flexible as you need it to be. There are too many possible applications to show them all in this brochure! Scan this QR Code to access the NetWave Wireless Network Application Design Guide, or visit:

6 Hardened Dual Radio Wireless Ethernet The NetWave [E] dual radio models are designed for redundant ring, and drop & repeat applications. Radio 1 can be configured for 5 GHz or 2.4 GHz operation and connects to an external antenna. Radio 2 supports 5 GHz operation and is connected to the 19 dbi internal antenna. These units support up to 145Mbps throughput using MIMO technology. The units can be powered by an IEEE 802.3af/at compliant switch or through a supplied power injection module. PSE is standard on the [E]; port 1 supports IEEE 802.3at PD power, port 2 sources IEEE 802.3at PSE power for powering IEEE 802.3at PD connected devices. Redundant Ring Topology (Shown with and 24VAC ed s) + PIM External Antenna Surveillance Network External Antenna STP Blocked Port ComNet Gigabit Managed Switch providing 30W ComNet Gigabit Managed Switch providing 30W Building or Other Obstacle External Antenna + LEGEND WIRELESS CAT5 POWER ETHERNET P1 P2 PORT 1 PD PORT 2 PSE 50Ω COAX External Antenna PIM 24VAC IP Ordering Information Part No. E /IA870 Description Industrial Dual Radio Unit, Port 2 has a PSE controller and will source IEEE 802.3at (25W) power (FCC NA Region) Industrial Dual Radio Unit, Port 2 has a PSE controller and will source IEEE 802.3at (25W) power (ETSI EU Region) 8dBi 70º internal antenna option Complete Product Documentation The complete NetWave product line is listed on ComNet s website, along with data sheets, quick start guides, and intruction manuals. Scan this QR Code or visit:

7 Optional Antennas Part No. Photo Description /IA870 N/A Internal Antenna. 8 dbi, 70º beam width integrated 5 GHz antenna Compatibility NW1/2 NW3/4 NW7[E] [E] External Dual Polarization GHz 16dBi Variable Beam Sector Antenna NWAODA1 External Omni Directional Dual Band (2dBi@2.4GHz / 5dBi@5GHz) Antenna, N Type Connector, 45º and 90º Articulating Joint NWADA1 External Dual Polarization GHz 19dBi 17º Beamwidth Directional Antenna /EXA N/A External n-type antenna option [ ] Compatible if customer has order the /EXA models. Solar for Wireless Ethernet Compatible with any of the ComNet Industrially Hardened NetWave Wireless Ethernet Units, the NetWave Solar is a complete system for providing remote power to edge communications equipment. The kit includes a high quality photovoltaic solar panel, outdoor enclosure, power controller with integrated power injection module, all the mounting hardware and is available with or without sealed lead acid batteries. The steel outdoor enclosure has a gasketed hinged lid with two tamper proof locks operated by a special key for high security. The enclosure and the panel can be mounted to a two-to-four inch (five to ten centimeter) pole or to a wall with the included mounting hardware. The included controller protects against overcharge and over discharge while the optional high performance batteries give the best available deep discharge and temperature performance. NWKSP1 NWKSP2 NWKSP3 NWKSP4 Continuous 15 W 15 W 30 W 30 W Peak Sunlight 6 Hours 3 Hours 6 Hours 3 Hours Battery Capacity 110 Ah 110 Ah 330 Ah 330 Ah Battery Voltage 12 V 12 V 24 V 24 V Reserve Time 40 Hours¹ 40 Hours¹ 40 Hours 40 Hours Output Voltage System Weight with Batteries² 48 V 48 V 48 V 48 V 162 lb (73 kg) 179 lb (81 kg) 299 lb (135 kg) [1] Includes 25% battery derating for moderately low temperatures. [2] Kits are optionally available without batteries included. 418 lb (189 kg) Ordering Information Part No. NWKSP1 NWKSP2 NWKSP3 NWKSP4 Included Accessories Description 15W continuous power solution with 60W Solar Panel 15W continuous power solution with 120W Solar Panel 30W continuous power solution with 120W Solar Panel 30W Continuous power solution with 240W Solar Panel Enclosure, Controller, Solar Panel, Cables Mounting hardware for the Solar Panel and Enclosure

8 Technical Support The ComNet Technical Support and Design Center provides pre-sale and post-sale support for Ethernet transmission network and fiber optic system design. The department is staffed by some of the most highly experienced, regarded and recognized experts in the industry. Our direct Design Center phone number is or you can call in the US or +44 (0) throughout Europe and ask for the Design Center, or contact us by at Lifetime Warranty We re so confident in the long-term reliability of our products, we back them with a no-questions asked Lifetime Warranty. Delighting the Customer ComNet s Customer Care Center is here to provide solutions. Staffed by experienced, knowledgeable, and courteous representatives, the ComNet Customer Care team is there to help. Customer Care representatives are available to answer your questions concerning pricing, product availability, order status, shipping dates, returns, warranty claims and so much more. Product Training and Education ComNet offers a full curriculum of fiber optic and Ethernet product training designed to educate you to make the right choices when selecting transmission equipment for your projects. Available online or in-person, ComNet training qualifies for CEU credit. 3 Corporate Drive Danbury, CT USA T: 1 (203) F: 1 (203) Tech Support: 1 (888) info@comnet.net 8 Turnberry Park Road Gildersome Morley Leeds, UK LS27 7LE T: +44 (0) F: +44 (0) info-europe@comnet.net AGENCY COMPLIANCE 2014 Communication Networks. All Rights Reserved. ComNet, the ComNet Logo, NetWave and the NetWave Logo are trademarks of Communication Networks. ComNetB10 Rev. 12 Mar 14 Travel light! This brochure and other ComNet product literature is available online. Scan this QR Code with your mobile device, or visit the literature section of