CCNA 1 v5.0 R&S ITN Final Exam 2014
|
|
- Daniel Gilmore
- 5 years ago
- Views:
Transcription
1 CCNA 1 v5.0 R&S ITN Final Exam Refer to the exhibit. The network administrator enters these commands into the R1 router: R1# copy running-config tftp Address or name of remote host [ ]? When the router prompts for an address or remote host name, what IP address should the administrator enter at the prompt? Which three statements characterize the transport layer protocols? (Choose three.) TCP uses port numbers to provide reliable transportation of IP packets. TCP and UDP port numbers are used by application layer protocols. TCP uses windowing and sequencing to provide reliable transfer of data. TCP is a connection-oriented protocol. UDP is a connectionless protocol. UDP uses windowing and acknowledgments for reliable transfer of data.
2 3 What is the purpose of ICMP messages? to inform routers about network topology changes to ensure the delivery of an IP packet to monitor the process of a domain name to IP address resolution to provide feedback of IP packet transmissions 4 A technician uses the ping command. What is the technician testing? connectivity between a PC and the default gateway connectivity between two adjacent Cisco devices physical connectivity of a particular PC and the network the TCP/IP stack on a network host connectivity between two PCs on the same network 5 What will a Layer 2 switch do when the destination MAC address of a received frame is not in the MAC table? It notifies the sending host that the frame cannot be delivered. It initiates an ARP request. It forwards the frame out of all ports except for the port at which the frame was received. It broadcasts the frame out of all ports on the switch. 6 What is a characteristic of the LLC sublayer? It places information in the frame that allows multiple Layer 3 protocols to use the same network interface and media. It provides delimitation of data according to the physical signaling requirements of the medium. It defines software processes that provide services to the physical layer. It provides the logical addressing required that identifies the device.
3 7 On which switch interface would an administrator configure an IP address so that the switch can be managed remotely? VLAN 1 console 0 vty 0 CCNA5.NET CCNA5.NET - MIPDF.COM MIPDF.COM FastEthernet0/1 8 A network engineer is measuring the transfer of bits across the company backbone for a mission critical database application. The engineer notices that the network throughput appears lower than the bandwidth expected. Which three factors could influence the differences in throughput? (Choose three.) the reliability of the gigabit Ethernet infrastructure of the backbone the amount of traffic that is currently crossing the network the type of traffic that is crossing the network the sophistication of the encapsulation method applied to the data the bandwidth of the WAN connection to the Internet the latency that is created by the number of network devices that the data is crossing 9 When applied to a router, which command would help mitigate brute-force password attacks against the router? service password-encryption login block-for 60 attempts 5 within 60 banner motd $Max failed logins = 5$ exec-timeout Which two statements correctly describe a router memory type and its contents? (Choose two.) ROM is nonvolatile and contains basic diagnostic software.
4 FLASH is nonvolatile and contains a limited portion of the IOS. ROM is nonvolatile and stores the running IOS. RAM is volatile and stores the IP routing table. NVRAM is nonvolatile and stores other system files. 11 Which two components are necessary for a wireless client to be installed on a WLAN? (Choose two.) custom adapter wireless bridge media wireless NIC crossover cable wireless client software 12 Launch PT - Hide and Save PT Open the PT activity. Perform the tasks in the activity instructions and then fill in the blank. The Server0 message is. winner
5 13 A host is accessing a Web server on a remote network. Which three functions are performed by intermediary network devices during this conversation? (Choose three.) applying security settings to control the flow of data notifying other devices when errors occur regenerating data signals acting as a client or a server serving as the source or destination of the messages providing a channel over which messages travel 14
6 15 16 Which address on a PC does not change, even if the PC is moved to a different network? IP address logical address MAC address default gateway address 17 What will happen if the default gateway address is incorrectly configured on a host? A ping from the host to would not be successful. The host will have to use ARP to determine the correct address of the default gateway. The host cannot communicate with other hosts in the local network. The host cannot communicate with hosts in other networks. The switch will not forward packets initiated by the host. 18 A host PC has just booted and is attempting to lease an address through DHCP. Which two messages will the client typically broadcast on the network? (Choose two.)
7 DHCPREQUEST DHCPOFFER DHCPDISCOVER DHCPNACK DHCPACK 19 Refer to the exhibit. An administrator wants to change the name of a brand new switch, using the hostname command as shown. What prompt will display after the command is issued? Switch# My(config)# My Switch(config)# Switch(config)# MySwitch(config)# 20 After making configuration changes, a network administrator issues a copy running-config startup-config command in a Cisco switch. What is the result of issuing this command? The configuration changes will be removed and the original configuration will be restored. The new configuration will be stored in flash memory. The current IOS file will be replaced with the newly configured file. The new configuration will be loaded if the switch is restarted. 21
8 Refer to the exhibit.a TCP segment from a server has been captured by Wireshark, which is running on a host. What acknowledgement number will the host return for the TCP segment that has been received? Which technology provides a solution to IPv4 address depletion by allowing multiple devices to share one public IP address? ARP DNS SMB DHCP HTTP NAT
9 23 What is the purpose of the routing process? to encapsulate data that is used to communicate across a network to select the paths that are used to direct traffic to destination networks to convert a URL name into an IP address to provide secure Internet file transfer to forward traffic on the basis of MAC addresses 24 Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices. If QoS is implemented on this network, what will be the priorities from highest to lowest of the different data types? audio conference, financial transactions, web page financial transactions, audio conference, web page audio conference, web page, financial transactions financial transactions, web page, audio conference 25 A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used? cell modem dial-up cable modem satellite DSL 26 Which connection provides a secure CLI session with encryption to a Cisco switch? a Telnet connection an SSH connection a console connection an AUX connection
10 27 What is the purpose of the network security accounting function? to provide challenge and response questions to require users to prove who they are to determine which resources a user can access to keep track of the actions of a user 28 Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator uses Telnet to connect to the switch, which password is needed to access user EXEC mode? lineconin linevtyin letmein secretin 29 Which publicly available resources describe protocols, processes, and technologies for the Internet but do not give implementation details? IEEE standards Request for Comments IRTF research papers protocol models
11 30 A PC is configured to obtain an IP address automatically from network /24. The network administrator issues the arp a command and notices an entry of ff-ff-ff-ff-ff-ff. Which statement describes this entry? This entry refers to the PC itself. This entry maps to the default gateway. This is a static map entry. This is a dynamic map entry. 31 Which subnet would include the address as a usable host address? / / / /29 32 A particular website does not appear to be responding on a Windows 7 computer. What command could the technician use to show any cached DNS entries for this web page? ipconfig /all ipconfig /displaydns arp -a nslookup 33 Which type of wireless security generates dynamic encryption keys each time a client associates with an AP? WPA PSK WEP EAP
12 34 A frame is transmitted from one networking device to another. Why does the receiving device check the FCS field in the frame? to compare the interface media type between the sending and receiving ends to determine the physical address of the sending device to verify that the frame destination matches the MAC address of the receiving device to check the frame for possible transmission errors to verify the network layer protocol information 35 Refer to the exhibit. Which IP addressing scheme should be changed? Site 1 Site 3 Site 4 Site 2
13 36 What is the effect of configuring the ipv6 unicast-routing command on a router? to assign the router to the all-nodes multicast group to permit only unicast packets on the router to enable the router as an IPv6 router to prevent the router from joining the all-routers multicast group 37 Which three IP addresses are private? (Choose three.) Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of the default gateway address?
14 It is the IP address of the Router1 interface that connects the company to the Internet. It is the IP address of the ISP network device located in the cloud. It is the IP address of Switch1 that connects PC1 to other devices on the same LAN. It is the IP address of the Router1 interface that connects the PC1 LAN to Router1. 39 During normal operation, from which location do most Cisco switches and routers run the IOS? flash RAM NVRAM disk drive 40 What is an important function of the physical layer of the OSI model? It encodes frames into electrical, optical, or radio wave signals. It accepts frames from the physical media. It encapsulates upper layer data into frames. It defines the media access method performed by the hardware interface. 41 Which procedure is used to reduce the effect of crosstalk in copper cables? wrapping the bundle of wires with metallic shielding avoiding sharp bends during installation requiring proper grounding connections designing a cable infrastructure to avoid crosstalk interference twisting opposing circuit wire pairs together
15 42 What are the three primary functions provided by Layer 2 data encapsulation? (Choose three.) placement and removal of frames from the media detection of errors through CRC calculations conversion of bits into data signals delimiting groups of bits into frames data link layer addressing error correction through a collision detection method session control using port numbers 43 What method is used to manage contention-based access on a wireless network? token passing CSMA/CD CCNA5.NET CCNA5.NET - MIPDF.COM MIPDF.COM CSMA/CA priority ordering 44 What happens when part of an Internet radio transmission is not delivered to the destination? A delivery failure message is sent to the source host. The part of the radio transmission that was lost is re-sent. The transmission continues without the missing portion. The entire transmission is re-sent. 45 What is the auto-mdix feature on a switch? the automatic configuration of full-duplex operation over a single Ethernet copper or optical cable the automatic configuration of an interface for a straight-through or a crossover Ethernet cable connection the ability to turn a switch interface on or off accordingly if an active connection is detected the automatic configuration of an interface for 10/100/1000 Mb/s operation
16 46 Which function is provided by TCP? detection of missing packets communication session control path determination for data packets data encapsulation 47 How does a Layer 3 switch differ from a Layer 2 switch? A Layer 3 switch learns the MAC addresses that are associated with each of its ports. However, a Layer 2 switch does not. A Layer 3 switch maintains an IP address table instead of a MAC address table. A Layer 3 switch supports VLANs, but a Layer 2 switch does not. An IP address can be assigned to a physical port of a Layer 3 switch. However, this is not supported in Layer 2 switches. 48 Which two notations are useable nibble boundaries when subnetting in IPv6? (Choose two.) /68 /62 /66 /64 /70 49 What is the purpose of having a converged network? to reduce the cost of deploying and maintaining the communication infrastructure to provide high speed connectivity to all end devices to make sure that all types of data packets will be treated equally to achieve fault tolerance and high availability of data network infrastructure devices
17 50 Refer to the exhibit. A ping to PC3 is issued from PC0, PC1, and PC2 in this exact order. Which MAC addresses will be contained in the S1 MAC address table that is associated with the Fa0/1 port? just the PC0 MAC address PC0, PC1, and PC2 MAC addresses just the PC2 MAC address just PC0 and PC1 MAC addresses just the PC1 MAC address 51 Which field in an IPv4 packet header will typically stay the same during its transmission? Packet Length Destination Address Flag Time-to-Live 52 What two preconfigured settings that affect security are found on most new wireless routers? (Choose two.) MAC filtering enabled default administrator password WEP encryption enabled PSK authentication required broadcast SSID
18 53 Which parameter does the router use to choose the path to the destination when there are multiple routes available? the higher metric value that is associated with the destination network the lower metric value that is associated with the destination network the higher gateway IP address to get to the destination network the lower gateway IP address to get to the destination network 54 CCNA5.NET CCNA5.NET - MIPDF.COM MIPDF.COM Refer to the exhibit. What is the significance of the asterisk (*) in the exhibited output? An asterisk designates that the file system has at least one file that uses that file system. The asterisk designates which file system is the default file system. An asterisk indicates that the file system is bootable. The asterisk shows which file system was used to boot the system. 55
19 56 Fill in the blank. During data communications, a host may need to send a single message to a specific group of destination hosts simultaneously. This message is in the form of a multicast message. 57 An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the ping command. What is the purpose of using these keystrokes? to interrupt the ping process to restart the ping process to allow the user to complete the command to exit to a different configuration mode 58 Refer to the exhibit. Which area would most likely be an extranet for the company network that is shown? area A area D area C area B
20 59 60
21 61 In which default order will a router search for startup configuration information? setup mode, NVRAM, TFTP NVRAM, TFTP, setup mode NVRAM, RAM, TFTP TFTP, ROM, NVRAM flash, ROM, setup mode 62
22 Launch PT - Hide and Save PT Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. Which IPv6 address is assigned to the Serial0/0/0 interface on RT2? 2001:db8:abc:1::1 2001:db8:abc:5::1 2001:db8:abc:5::2 2001:db8:abc:10::15 63 What is contained in the trailer of a data-link frame? physical address data error detection* logical address 64
23
CCNA 1 v5.1 + v6.0 Practice Final Exam Answers 100% Full
Free CCNA Exam Answers 2017 - Study CCNA for free! Free CCNA Study Guide, Tutorials, Labs, Practice Exams. CCNA Online Training and More! http://ccnav6.com CCNA 1 v5.1 + v6.0 Practice Final Exam Answers
More informationMiPDF.COM. 1. Convert the decimal number 231 into its binary equivalent. Select the correct answer from the list below.
CCNA1 v6.0 Pretest Exam Answers 2017 (100%) MiPDF.COM 1. Convert the decimal number 231 into its binary equivalent. Select the correct answer from the list below. 11110010 11011011 11110110 11100111* 11100101
More informationA few things to keep in mind while completing this activity:
CCNA Routing and Switching Introduction to Networks ITN Practice Skills Assessment Packet Tracer A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close
More informationCCNA 1 Chapter 2 v5.0 Exam Answers %
CCNA 1 Chapter 2 v5.0 Exam Answers 2015 100% 1. Which two features are characteristics of flash memory? (Choose two.) Flash provides nonvolatile storage. Flash receives a copy of the IOS from RAM when
More information1. Which OSI layers offers reliable, connection-oriented data communication services?
CCNA 1 Practice Final Exam Answers v4.0 100% 1. Which OSI layers offers reliable, connection-oriented data communication services? application presentation session transport network 2. Refer to the exhibit.
More informationCCNA 1 Chapter 2 v5.0 Exam Answers 2013
CCNA 1 Chapter 2 v5.0 Exam Answers 2013 1. Refer to the exhibit. A switch was configured as shown. A ping to the default gateway was issued, but the ping was not successful. Other switches in the same
More informationCCENT Practice Certification Exam # 2 - CCNA Exploration: Accessing the WAN (Version 4.0)
CCENT Practice Certification Exam # 2 - CCNA Exploration: Accessing the WAN (Version 4.0) 1. Data is being sent from a source PC to a destination server. Which three statements correctly describe the function
More informationMiPDF.COM. 3. Which procedure is used to access a Cisco 2960 switch when performing an initial configuration in a secure environment?
CCNA1 v6.0 Chapter 2 Exam Answers 2017 (100%) MiPDF.COM 1. What is the function of the kernel of an operating software? It provides a user interface that allows users to request a specific task. The kernel
More informationCCNA 1 Chapter 6 v5.0 Exam Answers 2013
CCNA 1 Chapter 6 v5.0 Exam Answers 2013 1 After troubleshooting a router, the network administrator wants to save the router configuration so that it will be used automatically the next time that the router
More information2. Which two functions of the OSI model occur at layer two? (Choose two.) physical addressing encoding routing cabling media access control
1. Which of the following are the address ranges of the private IP addresses? (Choose three.) 10.0.0.0 to 10.255.255.255 200.100.50.0 to 200.100.25.255 150.150.0.0 to 150.150.255.255 172.16.0.0 to 172.31.255.255
More informationCCNA 1 Final Exam Answers UPDATE 2012 eg.1
CCNA 1 Final Exam Answers UPDATE 2012 eg.1 January 12th, 2012AdminLeave a commentgo to comments Which of the following are the address ranges of the private IP addresses? (Choose three.) 10.0.0.0 to 10.255.255.255
More informationCCNA 1 Chapter 5 v5.0 Exam Answers 2013
CCNA 1 Chapter 5 v5.0 Exam Answers 2013 1 2 A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination
More informationCisco CCNA (ICND1, ICND2) Bootcamp
Cisco CCNA (ICND1, ICND2) Bootcamp Course Duration: 5 Days Course Overview This five-day course covers the essential topics of ICND1 and ICND2 in an intensive Bootcamp format. It teaches students the skills
More informationCCNA 1 Final Exam Answers UPDATE 2012 eg.2
CCNA 1 Final Exam Answers UPDATE 2012 eg.2 January 12th, 2012AdminLeave a commentgo to comments 1. When must a router serial interface be configured with the clock rate command? when the interface is functioning
More information2. What is a characteristic of a contention-based access method?
CCNA 1 Chapter 5 v5.0 Exam Answers 2015 (100%) 1. Which statement is true about MAC addresses? MAC addresses are implemented by software. A NIC only needs a MAC address if connected to a WAN. The first
More informationChapter 2. Switch Concepts and Configuration. Part I
Chapter 2 Switch Concepts and Configuration Part I CCNA3-1 Chapter 2-1 Note for Instructors These presentations are the result of a collaboration among the instructors at St. Clair College in Windsor,
More informationexam. Number: Passing Score: 800 Time Limit: 120 min CISCO Interconnecting Cisco Networking Devices Part 1 (ICND)
100-105.exam Number: 100-105 Passing Score: 800 Time Limit: 120 min CISCO 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND) Exam A QUESTION 1 Which route source code represents the routing
More informationCHAPTER 2 ACTIVITY
CHAPTER 2 ACTIVITY 2.1.1.1 1. CLI stands for 2. GUI stands for 3. Write the step you used to go to CLI interface on Windows 4. The OS, normally loads from a disk drive, into RAM. 5. The portion of the
More informationActual4Test. Actual4test - actual test exam dumps-pass for IT exams
Actual4Test http://www.actual4test.com Actual4test - actual test exam dumps-pass for IT exams Exam : 200-125 Title : CCNA Cisco Certified Network Associate CCNA (v3.0) Vendor : Cisco Version : DEMO Get
More informationInterconnecting Cisco Networking Devices Part 1 (ICND1) Course Overview
Interconnecting Cisco Networking Devices Part 1 (ICND1) Course Overview This course will teach students about building a simple network, establishing internet connectivity, managing network device security,
More informationCCNA2 Chapter 1 Practice
CCNA2 Chapter 1 Practice Where should a crossover UTP cable be used? (Choose 2) To connect two PCs together directly. To connect a router to an Ethernet switch. To connect a PC to an Ethernet switch. To
More informationStudy Guide. Module Two
Module Two Study Guide Study Guide Contents Part One -- Textbook Questions Part Two -- Assignment Questions Part Three -- Vocabulary Chapter 4 Data Link Layer What is the function of the data link layer?
More informationMobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE
Mobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE COURSE TITLE ROUTING AND SWITCHING FUNDAMENTALS COURSE DURATION 16 Hour(s) of Self-Paced Interactive Training COURSE OVERVIEW In the
More informationCCNA 4 - Final Exam (B)
CCNA 4 - Final Exam (B) 1. Identify the factors that contribute to congestion on an Ethernet LAN. (Choose three.) improper placement of enterprise level servers addition of hosts to a physical segment
More informationSYSTEMS ADMINISTRATION USING CISCO (315)
Page 1 of 11 Contestant Number: Time: Rank: SYSTEMS ADMINISTRATION USING CISCO (315) REGIONAL 2016 Multiple Choice: Multiple Choice (50 @ 10 points each) TOTAL POINTS (500 points) (500 points) Failure
More information1. Which layer of the OSI model is responsible for specifying the encapsulation method used for specific types of media?
CCNA 1 Chapter 4 v5.0 Exam Answers 2015 (100%) 1. Which layer of the OSI model is responsible for specifying the encapsulation method used for specific types of media? application transport data link physical
More informationCISCO EXAM QUESTIONS & ANSWERS
CISCO 100-101 EXAM QUESTIONS & ANSWERS Number: 100-101 Passing Score: 800 Time Limit: 120 min File Version: 35.5 http://www.gratisexam.com/ CISCO 100-101 EXAM QUESTIONS & ANSWERS Exam Name: CCNA Interconnecting
More informationMTA_98-366_Vindicator930
MTA_98-366_Vindicator930 Number: 98-366 Passing Score: 700 Time Limit: 45 min File Version: 1.0 http://www.gratisexam.com/ Microsoft Technology Associate Networking Fundamentals MTA 98-366 Exam A QUESTION
More informationOSI Model with Protocols. Layer Name PDU Address Protocols Device
NetEss Name: Networking Essentials Prof. CHIN OSI Model with Protocols Layer Name PDU Address Protocols Device 7 Application Data FTP, SSH, Telnet, SMTP, DNS TFTP,HTTP, POP3, IMAP, HTTPS 6 Presentation
More informationTestOut Routing and Switching Pro - English 6.0.x COURSE OUTLINE. Modified
TestOut Routing and Switching Pro - English 6.0.x COURSE OUTLINE Modified 2017-07-10 TestOut Routing and Switching Pro Outline- English 6.0.x Videos: 133 (15:42:34) Demonstrations: 78 (7:22:19) Simulations:
More informationExam E1 Copyright 2010 Thaar AL_Taiey
Exam E1 2 Exam E1 E1-1. Which of the following statements is true regarding the internetwork shown in Figure E1-1? (Select all that apply) Figure E1-1 A Sample Internetwork A. The link number 15 uses a
More informationInterconnecting Cisco Networking Devices Part1 ( ICND1) Exam.
Cisco 640-822 Interconnecting Cisco Networking Devices Part1 ( ICND1) Exam TYPE: DEMO http://www.examskey.com/640-822.html Examskey Cisco 640-822 exam demo product is here for you to test quality of the
More informationLab Using the CLI to Gather Network Device Information Topology
Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 192.168.1.1 255.255.255.0 N/A Lo0 209.165.200.225 255.255.255.224 N/A S1 VLAN 1 192.168.1.11 255.255.255.0
More informationChapter 5 Reading Organizer After completion of this chapter, you should be able to:
Chapter 5 Reading Organizer After completion of this chapter, you should be able to: Describe the operation of the Ethernet sublayers. Identify the major fields of the Ethernet frame. Describe the purpose
More informationChapter 6: Network Layer
Chapter 6: Network Layer CCNA Routing and Switching Introduction to Networks v6.0 Chapter 6 - Sections & Objectives 6.1 Network Layer Protocols Explain how network layer protocols and services support
More information1. IPv6 is the latest version of the TCP/IP protocol. What are some of the important IPv6 requirements?
95 Chapter 7 TCP/IP Protocol Suite and IP Addressing This chapter presents an overview of the TCP/IP Protocol Suite. It starts with the history and future of TCP/IP, compares the TCP/IP protocol model
More information1. Which network design consideration would be more important to a large corporation than to a small business?
CCNA 1 Chapter 11 v5.0 Exam Answers 2015 (100%) 1. Which network design consideration would be more important to a large corporation than to a small business? Internet router firewall low port density
More informationNetworking interview questions
Networking interview questions What is LAN? LAN is a computer network that spans a relatively small area. Most LANs are confined to a single building or group of buildings. However, one LAN can be connected
More informationImi :... Data:... Nazwisko:... Stron:...
Imi :.................................................... Data:....................... Nazwisko:............................................... Stron:...................... 1. Which of the following protocols
More informationCisco EXAM CCNA Cisco Certified Network Associate. Buy Full Product.
Cisco EXAM - 200-120 CCNA Cisco Certified Network Associate Buy Full Product http://www.examskey.com/200-120.html Examskey Cisco 200-120 exam demo product is here for you to test the quality of the product.
More information2. What flavor of Network Address Translation can be used to have one IP address allow many users to connect to the global Internet? A. NAT B.
How long is an IPv6 address? A. 32 bits B. 128 bytes C. 64 bits D. 128 bits Answer: Option D An IPv6 address is 128 bits long. 2. What flavor of Network Address Translation can be used to have one IP address
More informationChapter 11: It s a Network. Introduction to Networking
Chapter 11: It s a Network Introduction to Networking Small Network Topologies Typical Small Network Topology IT Essentials v5.0 2 Device Selection for a Small Network Factors to be considered when selecting
More informationInterconnecting Cisco Networking Devices Part 1 ( )
Interconnecting Cisco Networking Devices Part 1 (100-101) Exam Description: The 100-101 Interconnecting Cisco Networking Devices Part 1 (ICND1) is a 1.5- hour exam with 50 60 questions. The 100-101 Interconnecting
More informationQ&As. Interconnecting Cisco Networking Devices Part 1. Pass Cisco Exam with 100% Guarantee
640-822 Q&As Interconnecting Cisco Networking Devices Part 1 Pass Cisco 640-822 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: 100% Passing Guarantee 100% Money
More informationSwitches Chapter 2 1
Switches Chapter 2 1 Topics Operation of 100/1000 Mbps Ethernet Switches and how they forward frames Configure a switch Basic security on a switch 2 Semester 3 LAN Design Basic Switch Concepts Wireless
More informationSEMESTER 2 Chapter 1 Planning and Cabling a Network V 4.0
SEMESTER 2 Chapter 1 Planning and Cabling a Network V 4.0 135 points 1.1.1 What are the common components between a router and other computers? CPU RAM ROM Operating System 1.1.1.2 What does a router connect?
More informationChapter 6: Network Layer. Introduction to Networks v5.1
Chapter 6: Network Layer Introduction to Networks v5.1 6.0 Introduction 6.1 Network Layer Protocols 6.2 Routing 6.3 Routers 6.4 Configure a Cisco Router 6.5 Summary 2013 Cisco and/or its affiliates. All
More informationIntroduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies
Introduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies p. 19 Ethernet p. 19 WAN Technologies p. 21 Dedicated
More informationLab 7 Configuring Basic Router Settings with IOS CLI
Lab 7 Configuring Basic Router Settings with IOS CLI Objectives Part 1: Set Up the Topology and Initialize Devices Cable equipment to match the network topology. Initialize and restart the router and switch.
More informationChapter 6: Network Layer
Chapter 6: Network Layer Introduction to Networks v5.1 6.0 Introduction 6.1 Network Layer Protocols 6.2 Routing 6.3 Routers 6.4 Configure a Cisco Router 6.5 Summary 2 Upon completion of this section, you
More informationCCNA Exam File with Answers. Note: Underlines options are correct answers.
CCNA Exam File with Answers. Note: Underlines options are correct answers. 1. Which of the following are ways to provide login access to a router? (choose all that apply) A. HTTP B. Aux Port /TELNET C.
More informationCCNA. Course Catalog
CCNA Course Catalog 2012-2013 This course is intended for the following audience: Network Administrator Network Engineer Systems Engineer CCNA Exam Candidates Cisco Certified Network Associate (CCNA 640-802)
More informationCisco 1: Networking Fundamentals
Western Technical College 10150110 Cisco 1: Networking Fundamentals Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 90.00 This course
More information31270 Networking Essentials Focus, Pre-Quiz, and Sample Exam Answers
31270 Networking Essentials Focus, Pre-Quiz, and Sample Exam Answers CONTENTS Focus Questions... 2 Chapter 1: Explore the Network... 2 Chapter 2: Configure a Network Operating System... 5 Chapter 3: Network
More informationCOPYRIGHTED MATERIAL. Con t e n t s. Chapter 1 Introduction to Networking 1. Chapter 2 Overview of Networking Components 21.
Con t e n t s Introduction xix Chapter 1 Introduction to Networking 1 Comparing Logical and Physical Networks.... 1 Networking Home Computers........................................... 2 Networking Small
More informationSeite von 7 05.0.200 Close Window Assessment System Exam Viewer - CCNA Practice Certification Exam # - (Version 4.0) Below you will find the assessment items as presented on the exam as well as the scoring
More informationChapter 10 Configure AnyConnect Remote Access SSL VPN Using ASDM
Chapter 10 Configure AnyConnect Remote Access SSL VPN Using ASDM Topology Note: ISR G1 devices use FastEthernet interfaces instead of GigabitEthernet interfaces. 2015 Cisco and/or its affiliates. All rights
More informationLab 5.6.2: Challenge RIP Configuration
Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway BRANCH HQ ISP PC1 PC2 PC3 Fa0/0 S0/0/0 Fa0/0 S0/0/0 S0/0/1 Fa0/0 S0/0/1 NIC NIC NIC Learning Objectives Upon completion
More informationLab 2.8.2: Challenge Static Route Configuration
Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway BRANCH HQ ISP PC1 PC2 Web Server Fa0/0 S0/0/0 Fa0/0 S0/0/0 S0/0/1 209.165.201.2 255.255.255.252 Fa0/0 209.165.200.225
More informationCCNA 1 Chapter 11 V4.0 Answers
CCNA 1 Chapter 11 V4.0 Answers 1. Refer to the exhibit. What command will place the router into the correct mode to configure an appropriate interface to connect to a LAN? UBAMA# configure terminal UBAMA(config)#
More informationJaringan Komputer (CCNA-1)
Jaringan Komputer (CCNA-1) #2 Configuring a Network Operating System Susmini I. Lestariningati, M.T Introduction (1) Home networks typically interconnect a wide variety of end devices including PCs, laptops,
More informationChapter 11: Networks
Chapter 11: Networks Devices in a Small Network Small Network A small network can comprise a few users, one router, one switch. A Typical Small Network Topology looks like this: Device Selection Factors
More informationCCNA MCQS with Answers Set-1
CCNA MCQS with Answers Set-1 http://freepdf-books.com CCNA MCQS with Answers Set-1 Question 1# - Which of the following are ways to provide login access to a router? (choose all that apply) A. HTTP B.
More informationCISCO SYSTEM ADMINISTRATION (41)
CISCO SYSTEM ADMININSTRATION PAGE 1 OF 11 CONTESTANT ID# Time Rank CISCO SYSTEM ADMINISTRATION (41) Regional 2012 TOTAL POINTS (500) Failure to adhere to any of the following rules will result in disqualification:
More informationChapter 10 - Configure ASA Basic Settings and Firewall using ASDM
Chapter 10 - Configure ASA Basic Settings and Firewall using ASDM This lab has been updated for use on NETLAB+ Topology Note: ISR G1 devices use FastEthernet interfaces instead of GigabitEthernet interfaces.
More informationChapter 4: Network Access
4.0.1.1 Chapter 4: Network Access To support our communication, the OSI model divides the functions of a data network into layers. Each layer works with the layers above and below to transmit data. 4.0.1.2
More informationLab Student Lab Orientation
Lab 1.1.1 Student Lab Orientation Objective In this lab, the students will complete the following tasks: Review the lab bundle equipment Understand the security pod topology Understand the pod naming and
More informationCisco Exam Questions & Answers
Questions & Answers Number: 200-120 Passing Score: 821 Time Limit: 120 min File Version: 28.8 http://www.gratisexam.com/ Questions & Answers Exam Name: CCNA Cisco Certified Network Associate CCNA (803)
More informationLight Mesh AP. User s Guide. 2009/2/20 v1.0 draft
Light Mesh AP User s Guide 2009/2/20 v1.0 draft i FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
More informationCCNA Exploration1 Chapter 7: OSI Data Link Layer
CCNA Exploration1 Chapter 7: OSI Data Link Layer LOCAL CISCO ACADEMY ELSYS TU INSTRUCTOR: STELA STEFANOVA 1 Explain the role of Data Link layer protocols in data transmission; Objectives Describe how the
More informationTCP/IP Protocol Suite and IP Addressing
TCP/IP Protocol Suite and IP Addressing CCNA 1 v3 Module 9 10/11/2005 NESCOT CATC 1 Introduction to TCP/IP U.S. DoD created the TCP/IP model. Provides reliable data transmission to any destination under
More informationActual4Test. Actual4test - actual test exam dumps-pass for IT exams
Actual4Test http://www.actual4test.com Actual4test - actual test exam dumps-pass for IT exams Exam : 100-105 Title : Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) Vendor : Cisco Version
More informationChapter 2. Communicating Over The Network. CCNA1-1 Chapter 2
Chapter 2 Communicating Over The Network CCNA1-1 Chapter 2 Communicating Over the Network The Platform for Communications CCNA1-2 Chapter 2 Elements of Communication People communicate in many different
More informationEntry Level Assessment Blueprint Computer Networking Fundamentals
Blueprint Computer Networking Fundamentals Test Code: 4514 / Version: 01 Specific Competencies and Skills Tested in this Assessment: PC Principles Identify physical and equipment safety and maintenance
More informationConfiguring the Access Point/Bridge for the First Time
CHAPTER 2 Configuring the Access Point/Bridge for the First Time This chapter describes how to configure basic settings on your access point/bridge for the first time. You can configure all the settings
More informationLab Configuring Basic Switch Settings (Solution)
(Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway S1 VLAN 99 192.168.1.2 255.255.255.0 192.168.1.1 PC-A NIC 192.168.1.10 255.255.255.0 192.168.1.1
More informationCCNA 1 Chapter 10 v5.0 Exam Answers 2013
CCNA 1 Chapter 10 v5.0 Exam Answers 2013 1 Which three layers of the OSI model provide similar network services to those provided by the application layer of the TCP/IP model? (Choose three.) physical
More informationICND1 Open-Ended Questions
A P P E N D I X J ICND1 Open-Ended Questions Earlier editions of this book included some open-ended questions at the conclusion of each chapter to help readers prepare for the exam. Open-ended questions
More informationCCNA Cisco Certified Network Associate CCNA (v3.0)
CCNA Cisco Certified Network Associate CCNA (v3.0) Cisco 200-125 Dumps Available Here at: /cisco-exam/200-125-dumps.html Enrolling now you will get access to 455 questions in a unique set of 200-125 dumps
More informationExam : Title : Interconnecting Cisco Networking Devices Part 1. Ver :
Exam : Title : Interconnecting Cisco Networking Devices Part 1 Ver : 11-06-07 QUESTION 1 The junior network support staff provided the diagram as a recommended configuration for the first phase of a four-phase
More informationMODULE: NETWORKS MODULE CODE: CAN1102C. Duration: 2 Hours 15 Mins. Instructions to Candidates:
BSc.(Hons) Computer Science with Network Security BEng (Hons) Telecommunications Cohort: BCNS/17B/FT Examinations for 2017-2018 / Semester 2 Resit Examinations for BCNS/15A/FT, BTEL/15B/FT & BTEL/16B/FT
More informationChapter 6: Network Layer
Chapter 6: Network Layer Introduction to Networks Intro to Networks v5 Network Layer Intro to Networks v5 2 The Network Layer End to End Transport processes Addressing end devices Encapsulation of Packets
More informationLab 1. CLI Navigation. Scenario. Initial Configuration for R1
Lab 1 CLI Navigation This lab covers the most basic skills for accessing and using the command-line interface (CLI) on a Cisco router or switch. Many of the small, picky details of how the CLI works cannot
More informationInterconnecting Cisco Networking Devices Part 1 ICND1
Interconnecting Cisco Networking Devices Part 1 ICND1 Course Length: 5 days Course Delivery: Traditional Classroom Online Live Course Overview Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
More informationQuestion 7: What are Asynchronous links?
Question 1:.What is three types of LAN traffic? Unicasts - intended for one host. Broadcasts - intended for everyone. Multicasts - intended for an only a subset or group within an entire network. Question2:
More informationLab : Challenge OSPF Configuration Lab. Topology Diagram. Addressing Table. Default Gateway. Device Interface IP Address Subnet Mask
Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Fa0/0 HQ S0/0/0 S0/0/1 Lo1 10.10.10.1 255.255.255.252 Fa0/0 Branch1 S0/0/0 S0/0/1 Fa0/0 Branch2 S0/0/0 S0/0/1 PC1
More informationChapter 10 Configure Clientless Remote Access SSL VPNs Using ASDM
Chapter 10 Configure Clientless Remote Access SSL VPNs Using ASDM Topology Note: ISR G1 devices use FastEthernet interfaces instead of GigabitEthernet Interfaces. 2016 Cisco and/or its affiliates. All
More informationIntroduction to Routing and Packet Forwarding
Introduction to Routing and Packet Forwarding Routing Protocols and Concepts 1 Objectives Identify a router as a computer with an OS and hardware designed for the routing process. Demonstrate the ability
More informationLab 8.5.2: Troubleshooting Enterprise Networks 2
Lab 8.5.2: Troubleshooting Enterprise Networks 2 Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Fa0/0 192.168.10.1 255.255.255.0 N/A R1 Fa0/1 192.168.11.1 255.255.255.0
More informationCisco Cisco Certified Network Associate (CCNA)
Cisco 200-125 Cisco Certified Network Associate (CCNA) http://killexams.com/pass4sure/exam-detail/200-125 Question: 769 Refer to exhibit: Which destination addresses will be used by Host A to send data
More informationCommunicating over the Network
Communicating over the Network Network Fundamentals Chapter 2 Version 4.0 1 Network Structure The elements of communication 3 common elements of communication Message source people/electronic devices need
More informationWISNETWORKS. WisOS 11ac V /3/21. Software version WisOS 11ac
WISNETWORKS User Manual V1.1 2016/3/21 Software version 1.0.0021 Table of contents 1. Setup& WMI... 3 1.1 Hardware Setup... 3 1.2 Web Management Interface... 3 2. Status... 4 2.1 Overview... 4 2.1.1 System...
More informationCertified Cisco Networking Associate v1.1 ( )
Certified Cisco Networking Associate v1.1 (640-802) Exam Description: The Cisco Certified Networking Associate v1.1 640-802 is the composite exam that is associated with Cisco CCNA Routing and Switching
More informationLab - Configuring Basic DHCPv4 on a Router (Solution)
(Solution) Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 192.168.0.1 255.255.255.0 N/A G0/1 192.168.1.1 255.255.255.0 N/A S0/0/0 (DCE) 192.168.2.253
More informationLevelOne WBR User s Manual. 11g Wireless ADSL VPN Router. Ver
LevelOne WBR-3407 11g Wireless ADSL VPN Router User s Manual Ver 1.00-0510 Table of Contents CHAPTER 1 INTRODUCTION... 1 Wireless ADSL Router Features... 1 Package Contents... 5 Physical Details... 6 CHAPTER
More informationChapter 10 Configure Clientless Remote Access SSL VPNs Using ASDM
Chapter 10 Configure Clientless Remote Access SSL VPNs Using ASDM This lab has been updated for use on NETLAB+ Topology Note: ISR G1 devices use FastEthernet interfaces instead of GigabitEthernet Interfaces.
More informationInternet. Organization Addresses TCP/IP Protocol stack Forwarding. 1. Use of a globally unique address space based on Internet Addresses
Internet Organization Addresses TCP/IP Protocol stack Forwarding Jörg Liebeherr, 1998-2003 1 What defines the Internet? 1. Use of a globally unique address space based on Internet Addresses 2. Support
More informationDepartment Of Computer Science
Department Of Computer Science Laboratory Manual Prepared By: Muhammad Nouman Farooq Lecturer and Course Coordinator Course: Computer Communication and Networks (CS-205) Page 1 of 43 Table of Contents
More informationLab Configuring and Verifying Standard IPv4 ACLs (Instructor Version Optional Lab)
(Instructor Version Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or
More informationConfiguring a Basic Wireless LAN Connection
This module describes how to configure a wireless LAN (WLAN) connection between a wireless device, such as a laptop computer or mobile phone, and a Cisco 800, 1800 (fixed and modular), 2800, or 3800 series
More information