Huawei AP7110 Series Brochure-Detailed

Transcription

1 Huawei AP7110 Series Brochure-Detailed

2 Huawei AP7110 Series Brochure-Detailed Huawei AP7110 is a technology-leading Access Point (AP) that works in Fit mode on Wireless Local Area Networks (WLANs). It provides comprehensive service support capabilities and high reliability, high security, simple network deployment, automatic Access Controller (AC) discovery and configuration, and real-time management and maintenance. Product Features Huawei AP7110SN-GN Access Point 2.4 GHz frequency band Compatibility with IEEE b/g/n Huawei AP7110DN-AGN Access Point 2.4 GHz and 5 GHz frequency bands Compatibility with IEEE a/b/g/n Tolly certified Huawei AP7110 advantages: High-speed, reliable wireless access services: uses the latest n chip for higher performance and wider coverage; provides a rate of 450 Mbit/s for each radio; excellent for high-density applications. Comprehensive user access control capability: implements user access control based on user group policies; supports a maximum of 256 users. Solid network security: supports multiple authentication and encryption modes, as well as rogue AP and STA detection. Flexible networking and strong environment adaptability: provides access and bridging services and automatically adjusts working channel, transmit power, and bandwidth to adapt to various environments. Easy management and maintenance: supports Plug-and-Play (PnP) and deployment based on expert network planning and optimization tools. Industry-leading AP for good radio performance; recommended for use in large scenarios or scenarios with high user density, including exhibition centers, hospitals, factories, and stadiums n 3 x 3 Multiple-Input Multiple-Output (MIMO), three spatial streams, 450 Mbit/s for each radio, and 900 Mbit/s system rate for the AP7110DN-AGN Industry-level design with high waterproof and dustproof protection grades: applicable to challenging environments PoE power supply in compliance with IEEE 802.3af/at, simplifying AP installation External antenna enables flexible configuration of antenna gain and selection of deployment positions Value-added services such as spectrum analysis and locating service Wireless Distribution System (WDS)/Mesh Wireless Intrusion Detection System (WIDS)/Wireless Intrusion Prevention System (WIPS) Auto Radio High Density Boost User Awareness Beamforming IPv6 support Working frequencies: - AP7110SN-GN: 2.4 GHz - AP7110DN-AGN: 2.4 GHz and 5 GHz Scalability When coupled with ACs and Network Management Systems (NMSs), Huawei ac APs can implement real-time monitoring, intelligent Radio Frequency (RF) management, spectrum analysis, wireless positioning, load balancing, roaming, security policy control, wired/wireless network integration, as well as Bring Your Own Device (BYOD) network security control and a smart access strategy. The AC + Fit AP architecture is highly scalable and supports centralized management of multiple Fit APs on a single AC. Software upgrade technologies allow users to seamlessly add and upgrade APs without incurring additional administrative or equipment expense. 1 HUAWEI WLAN Products Portfolio

3 Typical Networking Huawei AP7110SN-GN and AP7110DN-AGN can work in AP, WDS, or Mesh mode. Fit AP networking S27/37/57 PoE switch Box AC AC6605 Legend 2.4 GHz coverage 5.8 GHz bridge Mesh MPP MPP AC6005 MP MP MP MP MAP MAP Office 1 Office 2 Office 3 Office N S27 PoE switch Medium-sized office When working as Fit APs, the AP7110SN-GN and AP7110DN-AGN provide data forwarding functions. An AC is required for user access, AP management, authentication, routing, security, and QoS. The AP7110SN-GN and AP7110DN-AGN can also be deployed in a Wireless Distribution System (WDS) or mesh networking as Fit APs. In WDS mode, the AP supports Point-to-Point (P2P) and Point-to-Multi-Point (P2MP) networking modes. With 5 GHz and 2.4 GHz frequency bands, the APs can implement wireless bridging and access functions. Mesh Points (MPs) interconnect to form a self-configuring, self-healing Wireless Mesh Network (WMN) backbone, and Mesh Portal Points (MPPs) provide a connection to the Internet. Stations (STAs) can connect to the WMN network through Mesh Access Points (MAPs). Dedicated mesh routing protocols can provide better transmission quality to ensure high bandwidth and Internet connection service stability. Basic Specifications Item Technical specifications Power specifications Dimensions (W x D x H) Weight System memory Power input Maximum power consumption Description 200mm 200mm 45mm 1.0kg 256 MB DDR3 32 MB flash memory 12 V DC ± 10% PoE power supply: -48 V DC AP7110SN-GN in compliance with IEEE 802.3af/at AP7110DN-AGN in compliance with IEEE 802.3at AP7110DN-AGN: 15.7W AP7110SN-GN: 8.7W NOTE The actual maximum power consumption depends on local laws and regulations. HUAWEI WLAN Products Portfolio 2

4 Item Environmental specifications Operating temperature Storage temperature Operating humidity Waterproof and dustproof grade Altitude Description -10 o C to +55 o C -40 o C to +70 o C 5% to 95% (non-condensing) IP41-60 m to 5,000 m Radio Specifications Item Antenna type Antenna gain Maximum number of users Maximum transmit power Power increment Receiver sensitivity Description External antennas, RP-SMA AP7110DN-AGN:» 2.4G: 2.5dBi» 5G: 4dBi AP7110SN-GN: 2.5 dbi dbm for each radio port NOTE The actual transmit power depends on local laws and regulations. 1 dbm 2.4 GHz b (CCK): Mb/s; Mb/s 2.4 GHz g (non-ht20): Mb/s; Mb/s 2.4 GHz n (HT20): -93 MCS0; -73 MCS GHz n (HT40): -86 MCS0; -70 MCS23 5 GHz a (non-ht20): Mb/s; Mb/s 5 GHz n (HT20): -93 MCS0; -69 MCS23 5 GHz n (HT40): -87 MCS0; -66 MCS23 Product Features WLAN AP7110DN-AGN: compliance with IEEE a/b/g/n AP7110SN-GN: compliance with IEEE b/g/n AP7110SN-GN: maximum rate of 450 Mbit/s AP7110DN-AGN: maximum rate of 900 Mbit/s Maximum Ratio Combining (MRC) Cyclic Shift Diversity (CSD) Maximum Likelihood Detection (MLD) Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) Dynamic Frequency Selection (DFS) for the AP7110DN-AGN Short Guard Interval (GI) 3 HUAWEI WLAN Products Portfolio

5 WLAN Network QoS Security Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding Automatic and manual rate adjustment (the rate is adjusted automatically by default) WLAN channel management and channel rate adjustment Automatic channel scanning and interference avoidance Service Set Identifier (SSID) hiding, support for SSIDs in Chinese Signal Sustain Technology (SST) Unscheduled Automatic Power Save Delivery (U-APSD) Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode Automatically going online in Fit AP mode WDS in Fit AP mode Mesh in Fit AP mode Dual-MPP Mesh networking in Fit AP mode Hotspot2.0 in Fit AP mode k and v smart roaming in Fit AP mode Compliance with IEEE 802.3u Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) SSID-based VLAN assignment 4,094 VLAN IDs (1 to 4,094) and a maximum of 16 Virtual APs (VAPs) for each radio AP control channel in tagged and untagged mixed mode DHCP client, obtaining IP addresses through DHCP Tunnel forwarding and direct forwarding STA isolation in the same VLAN Multicast Domain Name Service (mdns) gateway protocol: supports AirPlay and AirPrint service sharing between users of different VLANs Access Control Lists (ACLs) Link Layer Discovery Protocol (LLDP) Service holding upon CAPWAP link disconnection in Fit AP mode Unified authentication on the AC in Fit AP mode AC dual-link backup in Fit AP mode Soft GRE Priority mapping and packet scheduling based on a WMM profile to implement priority-based data processing and forwarding WMM parameter management for each radio WMM power saving Priority mapping for upstream packets and flow-based mapping for downstream packets Queue mapping and scheduling User-based bandwidth limiting Adaptive bandwidth management (the system dynamically adjusts bandwidth allocation based on the user quantity and environment to improve user experience) Airtime scheduling Open system authentication WEP authentication/encryption WPA/WPA2-PSK authentication and encryption WPA/WPA x authentication and encryption WAPI authentication and encryption WIDS including rogue AP and STA detection, attack detection, STA/AP blacklist and whitelist w Protected Management Frames (PMFs) HUAWEI WLAN Products Portfolio 4

6 Maintenance BYOD Locating service Spectrum analysis Unified management and maintenance on the AC in Fit AP mode Plug-and-Play (PnP) in Fit AP mode: automatically going online and loading configurations WDS zero-configuration deployment in Fit AP mode Mesh zero-configuration deployment in Fit AP mode Batch upgrade Local AP management using Telnet or through the serial port Real-time configuration monitoring and fast fault location using the NMS System status alarm Identifies the device type according to the Organizationally Unique Identifier (OUI) in the MAC address. Identifies the device type according to the User Agent (UA) information in an HTTP packet. Identifies the device type according to DHCP options. The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets. Locates tags manufactured by AeroScout or Ekahau. Locates Wi-Fi terminals. Identifies interference sources such as baby monitors, Bluetooth devices, digital cordless phones (at 2.4 GHz frequency band only), wireless audio transmitters (at both the 2.4 GHz and 5 GHz frequency bands), wireless game controllers, and microwave ovens. Works with esight to locate and perform spectrum analysis on interference sources. Standards Compliance Safety Radio EMC UL CAN/CSA 22.2 No IEC AP7110DN-AGN: ETSI EN ETSI EN FCC Part 15C: FCC Part 15C: RSS-210 AS/NZS 4268 EN EN ETSI EN FCC Part 15 ICES-003 YD/T ITU k.21 GB 9254 EN GB 4943 AP7110SN-GN: ETSI EN FCC Part 15C: RSS-210 AS/NZS 4268 GB AS/NZS CIPSR22 EN EN CISPR 22 CISPR 24 IEC IEC HUAWEI WLAN Products Portfolio

7 IEEE Security Environmental EMF RoHS Reach WEEE AP7110DN-AGN: IEEE a/b/g IEEE n IEEE h IEEE d IEEE e IEEE k IEEE u IEEE v IEEE w AP7110SN-GN: IEEE b/g IEEE n IEEE h IEEE d IEEE e IEEE k IEEE u IEEE v IEEE w i, Wi-Fi Protected Access 2 (WPA2), and WPA 802.1X Advanced Encryption Standards (AES) and Temporal Key Integrity Protocol (TKIP) EAP Type(s) ETSI ETSI ETSI CENELEC EN CENELEC EN OET65 Directive 2002/95/EC & 2011/65/EU Regulation 1907/2006/EC Directive 2002/96/EC & 2012/19/EU ETSI ETSI ETSI RSS-102 FCC Parts 1 & 2 FCC KDB series Professional Service and Support Huawei WLAN planning tools deliver expert network design and optimization services using the most professional simulation platform in the industry. Backed by fifteen years of continuous investment in wireless technologies, extensive network planning and optimization experience, as well as rich expert resources, Huawei helps customers: Design, deploy, and operate a high-performance network that is reliable and secure. Maximize return on investment and reduce operating expenses. More Information For more information, please visit or contact your local Huawei office. Enterprise Services Product Overview Marketing Documentation HUAWEI WLAN Products Portfolio 6

8 Copyright Huawei Technologies Co., Ltd All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.