Pendant Stations Type BW, SKYP, and XACA

Transcription

1 Type BW, SKYP, and XAA atalog 900T00 00 lass 900 ONTENTS Description Page Type BW General Information Specifications and Dimensions Type XAA General Information and Specifications Worksheet Dimensions Type SKYP General Information and Specifications Worksheet Dimensions Index

2 Type BW Standard Duty Pendant Stations Type BW Standard Duty Pendant Stations With External Strain Relief BW90/BW00 All of the features of the lass 900 Type BW pendant stations with external strain relief are now pre-assembled into one catalog number. Push button legend inserts Field-installable mushroom button Full cover gasket, to exclude harmful contaminants Jumper, included on all single speed buttons (except universal types), to save wiring time Self-lifting pressure wire connectors, for easy wiring Operator and contact sold as one unit Without External Strain Relief The lass 900 Type BW Pendant Station is a pre-assembled, -button station well suited for standard hoist applications. Oversized finger grips on the rear of the enclosure make it easy to grip and operate. Features and Options BW70/BW80 Made of high impact thermoplastic with UL 94V rating (self-extinguishing flammability) NEMA,, R, 4, and 4X watertight, dusttight, oiltight, and corrosion resistant UL Listed and SA approved /" conduit opening Internal strain-relief post Momentary or maintained contact Single speed or two speed With or without a mechanical interlock Optional external hanger bracket and seal Ribs on the top of the enclosure to prevent the hanger bracket from rotating and coming loose ontoured for easy grip Easy to hold with one hand OFF and STOP are white letters on a red background /00 00 Schneider Electric

3 Specifications Specifications The lass 900 BW70, BW80, BW90, and BW00 pendant stations are used for hoist applications requiring either single-speed or two-speed buttons. These thermoplastic enclosures have a /-inch conduit entrance at the top to accept a pendant cable. Internal strain relief comes standard. The BW90 and BW00 pendant stations come with internal and external strain relief as standard. The stations are rated NEMA Type,, R, 4, and 4X. The enclosure is available in three colors. All universal stations have double circuit blocks ( N.O. N..) on each button and come without legends so they can be assembled to fit the application. For convenience, push buttons have interchangeable legend inserts. The complete line is UL listed and SA certified. Table : General Specifications, Type BW Electrical Ratings Enclosure Type Operating Temperature Storage Temperature Housing Material A = NEMA / UL B600; D = NEMA / UL P600 NEMA / UL Type,, R, 4, and 4X 5 to +60 ( F to +40 F) 40 to +70 ( 40 F to +58 F) Polycarbonate/PET Polyester Blend Approvals File E7840 N NKR File LR 5490 lass 0 Marking Figure : Dimensions, Type BW NPT Mounting Slot /" NPT Strain Relief onnector Dual Dimensions inches mm Table : Electrical Ratings D D NEMA / UL P600 Inductive and Resistive Volts Make and Break Amperes ontinuous arrying Amperes Schneider Electric /00

4 Specifications Table : Electrical ontact Ratings, A, Type BW Volts [] Make A NEMA / UL B600 Inductive, 5% Power Factor Break A VA A VA ontinuous arrying Amperes Resistive, 75% Power Factor Make, Break, and ontinuous arrying Amperes OSHA Regulation, Section Overhead and Gantry ranes, limits the voltage at pendant push buttons to 50 Vac or 00 Vdc. BW90 / BW00 How to Order Specify: lass Number Type Number atalog Number: lass Type 900 BW9Y Table 4: Description Single Speed Two Speed Type BW90 and BW00 Pendant Stations with ord onnector and Strain Relief Legend Insert Markings Mechanical Interlock Enclosure olor Yellow Black Red ontact Symbol 900 Type Replacement Interior ontact Symbol Up-Down Yes BW9Y BW9B BW9R 46 BO68 46 Forward- Reverse Yes BW9Y BW9B BW9R 46 BO68 46 On-Off [] Yes BW94Y BW94B BW94R 0 BO58 47 Start-Stop No BW95Y BW95B BW95R 45 BO59 5 Start-Stop [] Yes BW96Y BW96B BW96R 0 BO58 47 On-Off [] No BW97Y BW97B BW97R 46 BO59 5 Up-Down Yes BW98Y BW98B 00 Without Inserts Yes BW90YU BW90BU BW90RU 47 BO66 5 Without Inserts No BW9YU BW9BU BW9RU 5 BO59 5 Without Inserts [] Yes BW94YU BW94BU BW94RU 47 BO58 47 Without Inserts Yes BW00YU BW00BU BW00RU 50 BO67 50 Up-Down Yes BW0Y BW00B BW0R 50 BO67 50 Maintained contact Table 5: Type BW70 and BW80 Pendant Stations BW70 / BW80 How to Order Specify: lass Number Type Number atalog Number: lass Type 900 BW7Y Description Single Speed Two Speed Maintained contact Legend Insert Markings Mechanical Interlock Enclosure olor Yellow Black Red ontact Symbol 900 Type Replacement Interior ontact Symbol Up-Down Yes BW7Y BW7B BW7R 46 BO68 46 Forward-Reverse Yes BW7Y BW7B BW7R 46 BO68 46 On-Off [] Yes BW74Y BW74B BW74R 0 BO58 47 Start-Stop No BW75Y BW75B BW75R 45 BO59 5 Start-Stop [] Yes BW76Y BW76B BW76R 0 BO58 47 On-Off No BW77Y BW77B BW77R 46 BO59 5 Up-Down Yes BW78Y 00 Without Legend Inserts Yes BW70YU BW70BU BW70RU 5 BO66 5 Without Legend Inserts No BW7YU BW7BU BW7RU 5 BO59 5 Without Legend Inserts [] Yes BW74YU BW74BU BW74RU 47 BO58 47 Without Legend Inserts Yes BW80YU BW80BU BW80RU 50 BO67 50 Up-Down Yes BW8Y BW8B BW8R 50 BO /00 00 Schneider Electric

5 Specifications Figure : ontact Symbols Table 6: Interchangeable Push Button Legend Inserts for 900 BW Pendants, NEMA / UL Type 4X [] Approvals File E7840 N NKR File LR 5490 lass 0 Marking Each button has N.O. contact with 4 terminals. Speed Speed Speed Speed Marking Push Button Mushroom Button Marking Push Button Mushroom Button Type Type Type Type Start B59 B8 On B57 B80 Stop B60 B8 Off B58 B8 Forward B55 B78 Hand B65 B88 Reverse B56 B79 Auto B66 B89 Open B6 B86 lose B64 B87 Black B5 B5 Raise B6 B84 Lower B6 B85 Red B5 B5 Up B5 B76 Down B54 B77 Order in multiples of 0. Table 7: Legend Insert Kit Where Used: Type [] For NEMA Type 4X: Push Button B50 (includes each of B5 through B66) Type BW70, BW80, BW90, and BW00 Mushroom Button B00 (includes each of B76 through B89) Kit includes one each of standard legend inserts as indicated under Type of kit. Table 8: Hanger Bracket [] (Factory Installed Only on Type BW7 and BW8 ) Form Y6 Addition of the external hanger bracket (similar to the one used on lass 900 Type SKYP pendant stations). Use when polymeric cord connectors are required. Table 9: Strain Relief Replacement for Type BW9 and BW0 Order Number Table 0: Hanger Bracket and Seal Kit Order Number B50 BWSR Table : Mushroom Button (without Button Insert) for 900 BW Pendants, NEMA / UL Type 4X [] olor Red See page for dimensions. Type B0 Table : 900 BW Pendant Replacement Enclosures [] Description Yellow Red Black Box and cover with four screws BWRY BWRR BWRB Screws are required. Order quantity of four, catalog no Schneider Electric /00 5

6 Type XAA General Information Type XAA General Information XAA pendant stations are designed for standard- or medium-duty control circuit applications. The enclosures are made from rugged, double insulated thermoplastic material. These stations have been designed for easy handling and operation, even with heavy work gloves. Two styles of stations are offered: small hoist pistol grip stations with integral parts (see Table 4 on page 7), and general purpose station components with modular assembly required. The general purpose components are available as custom, factory-assembled stations. For custom applications, a wide range of operators, contact blocks, legend plates, and accessories are offered. Features Applications Single- and two-speed versions Overhead cranes Double insulated Tower cranes Shock and corrosion resistant Fixed hoists, 4, 6, 8, element versions Beam hoists Ease of operation To place a custom pendant order, use the worksheet on page as a guide. Orders must be placed through the Product Selector in Quote to ash. There is a 0% charge for assembly. Type XAA Specifications Table : XAA Specifications XAA08 Shown with optional operators and accessories. Electrical Ratings NEMA / UL A600, Q600 Enclosure XAA0 NEMA / UL Type 4, 4X (Indoor/Outdoor), 5, IP 65 XAA (Pistol Grip) NEMA / UL Type 4, 4X (Indoor/Outdoor), 5, IP 65 Operating Temperature -5 to +70 (-5 F to +58 F) Storage Temperature -40 to +70 (-40 F to +58 F) Housing Material Yellow polypropylene V Shock Resistance 00 g Vibration Resistance 5 g for 40 to 500 Hz Mechanical Life Operating Force able Entry abling million operations (The product life expressed is based on average usage and normal operating conditions. Actual operating life varies with conditions. The above statements are not intended to nor shall they create any express or implied warranties as to product operation or life. For information on the limited warranty offered on this product, please refer to Schneider Electric terms and conditions of sale found in the Digest.) XAA multi-element types With contact ZBBE: dan (6 oz.) for N.O.;. dan (46.8 oz.) for N.O. / N.. With contact XENG49:.4 dan (50.4 oz.) for N.. / N.O. With contact XENG9:.4 dan (50.4 oz.) for st step;.5 dan (89.9 oz.) for nd step XAD: 7 to 8 mm All other models: 8 to 6 mm Screw and captive cable clamp terminals. Recommended torque 5.6 lb-in (.8 N m) apacity: minimum x 0.5 mm (0 AWG) solid or stranded; maximum, with or without cable end: x.5 mm (6 AWG) or x.5 mm (4 AWG) or by cable quick connector conforming to NF 0-0 (on request). Approvals File E645 N NKR File LR lass 0 Marking 6 /00 00 Schneider Electric

7 Type XAA Specifications Table 4: Pistol Grip Stations Description Speeds Function Speed / Speed atalog Number XAA0 N.O. contact per operator mechanically interlocked operators N.O. (staggered) contacts per operator mechanically interlocked operators N.O. + N.. mechanically interlocked operators N.O. contact per direction mechanically interlocked way toggle N.O. & N.. contact per direction mechanically interlocked way toggle XAA0 [] XAA07 [] XAA05 [] XADA00 XADA005 These XA units are available with factory installed E-stops. Add a to the end of the catalog number for the standard E-stop or add a 4 for a trigger action E-stop. E-stops include one N.. contact block. [, ] Table 5: General Purpose Pendants XAA06 Enclosures atalog Number -hole enclosure XAA0 -hole enclosure (top hole is for E-stop only) XAA0 [] 4-hole enclosure XAA04 6-hole enclosure XAA06 8-hole enclosure XAA08 -hole enclosure XAA Standard enclosures include internal mounting plate, cable sleeve for 8 to 6 mm, internal cable clamp, suspension ring and cable tie. Due to space limitations, two ZBBE0 or ZBBE0 contact blocks will fit behind each operator, but only one of any other contact block. Potentiometers will not fit in the enclosures. annot use base-mounted items or mounting adapter. Table 6: ontact Blocks for Operators in over [] XAA0 (Shown with optional operator) Description Wiring Diagram atalog Number N.O. / spring return / speed ZBBE0 N.. / spring return / speed ZBBE0 N.O. early close, and N.. and N.O. / spring return / speed A XENG9 N.. and N.O. / spring return / speed B XENG49 N.O. and N.O. latching / speed / interlocked XENG78 N.O. and N.. latching / speed / interlocked D XENG79 N.. + N.. + N.. with positive opening operation E XENT9 For mounting in enclosures: XAA0 (frontal cut-out); XAA05, A06, A08 (frontal or base cut-out). ZBBE0 XENG7 Table 7: For Operators in Base of Enclosure [] Description atalog Number N.O. / speed XAS0 N.. / speed XAS0 N.O. / speed XAS0 N.. / speed XAS04 N.O. and N.. / speed XAS05 annot be used with XAA0 pendant. A B D E XENG9 XAS Schneider Electric /00 7

8 Type XAA Specifications Table 8: Operators [] Description olor atalog Number Booted Push Button Booted push button White Black Green Red Yellow Blue Brown XAA94 XAA94 XAA94 XAA944 XAA945 XAA946 XAA949 Mushroom Head Selector Switch Description Mushroom Size olor atalog Number Mushroom head, momentary 0 mm Red ZAB44 Mushroom head, push to maintain / turn to release Mushroom head, push to maintain / turn to release (trigger action) [] 0 mm Red ZABS44 40 mm Red ZABS54 0 mm Red ZABS84 40 mm Red ZABS844 0 mm Red ZABS74 Mushroom head, push to maintain / key turn to release 40 mm Red ZABS4 Mushroom head, push to maintain / key turn to release (trigger action) [] 40 mm Red ZABS844 Selector Switch (Key Operated) Description olor atalog Number Selector switch / position maintained [] Black ZABD Selector switch / position maintained [] Black ZABD Selector switch / position maintained key operated key removal from left or right position [] NA ZABG4 Selector switch / position maintained key operated key removal from left or right position [] NA ZABG5 Wobble stick (bottom mounting recommended) Black ZABB Red ZABB4 Booted push buttons are for cover mounting only. All other operators can be mounted on cover or bottom. Wobble stick Trigger action mushroom heads are tamper-proof, meaning that teasing or floating the operator does not change the contact state. Not for use with XENG or XENT contact blocks. Table 9: Pilot Light omponents XAB96 XAA97 Description olor atalog Number Direct supply base without lamp (for 6 0 V applications) (A/D) ZBBV006 Resistor supply base with 0 V lamp (for 0 40 V applications) (A/D) ZBBV007 Green ZABV0 Red ZABV04 Pilot light operators for incandescent lamps Amber ZABV05 Blue ZABV06 lear ZABV07 Green ZABV0 Pilot light operators for LED lamps Red ZABV04 Amber ZABV05 XAA98 Table 0: Enclosure Accessories XAA98 Description Blank hole plug Mechanical interlock (momentary). For use with XA booted operators only. Screw adapter for self-supporting cable Low suspension ring for single row station Protective guard for bottom mounted mushroom head Protective guard for bottom mounted selector switch or key switch able sleeve (XAA0 ) pistol grip style able sleeve (XAA ) atalog Number ZBSZ XAA009 XAB96 XAA97 XAA98 XAA98 XAA9 XAA960 8 /00 00 Schneider Electric

9 Type XAA Specifications Figure : Exploded View XAA960 XAB96 XENT9 XAA94 XENG 9 ZAB4 ZAB44 XENG7 XAA009 ZABS54 ZBBE ZABS44 ZABS4 XAS ZBBY ZBBV00 ZABS74 ZBBY ZABD XAA98 ZABG XAA97 XAA98 ZABD ZABB ZABV0 ZABG ZAB BS ZBSZ 00 Schneider Electric /00 9

10 Type XAA Specifications Table : Lamps DLE0 (Incandescent) Type Voltage (A/D) Watts atalog Number Replacement Bulbs Type BA9s Incandescent 6. DLB006.0 DLE0 4.0 DLE DLE DLE0 DLJUS (LED) Type olor Voltage atalog Number LED, BA9s Base for Direct Supply Blocks Green 6 Vac/Vdc DLJUS006 Red 6 Vac/Vdc DLJUS0064 Amber 6 Vac/Vdc DLJUS0065 Green Vac/Vdc DLJUS0 Red Vac/Vdc DLJUS04 Amber Vac/Vdc DLJUS05 Green 4 Vac/Vdc DLJUS04 Red 4 Vac/Vdc DLJUS044 Amber 4 Vac/Vdc DLJUS045 Green 0 Vac/Vdc DLJUS0 Red 0 Vac/Vdc DLJUS04 Amber 0 Vac/Vdc DLJUS05 Table : PV Standard Legend Plates 0 x 40 mm Text [] atalog Number Text [] atalog Number Bridge Forward ZBBY4 Off ZBBY Bridge Reverse ZBBY44 On ZBBY lose ZBBY4 Off On ZBBY67 Down ZBBY08 Open ZBBY Emergency Stop ZBBY0 Open lose ZBBY76 Fast ZBBY8 Open-O-lose ZBBY88 Forward ZBBY05 Out ZBBY9 For Rev ZBBY Power On ZBBY6 For-O-Rev ZBBY84 Raise ZBBY5 Hand Off Auto ZBBY87 Reset ZBBY High ZBBY8 Reverse ZBBY06 High Low ZBBY69 Right ZBBY09 Hoist Down ZBBY4 Run ZBBY4 Hoist Up ZBBY4 Slow ZBBY7 In ZBBY50 Start ZBBY0 Inch ZBBY Stop ZBBY04 Jog For ZBBY8 Stop Start ZBBY66 Jog Rev ZBBY80 Trolley Right ZBBY45 Jog Run ZBBY65 Trolley Left ZBBY46 Left ZBBY0 Up ZBBY07 Low ZBBY6 Up Down ZBBY70 Lower ZBBY7 Up-O-Down ZBBY89 Man Auto ZBBY7 All nameplates are black with white lettering except Stop, Emergency Stop, and Reset, which are red with white lettering. For black Reset, change the final digit of the catalog number to. Table : PV Blank or ustom Engraved Legend Plates, 0 x 40 mm 0 /00 Type Description atalog Number PV Blank Legend PV ustom Engraved [] Black or red background Yellow or white background Black background, white letters Red background, white letters White background, black letters Yellow background, black letters ZBBY0 ZBBY40 ZBBY00 ZBBY004 ZBBY400 ZBBY4005 Please specify lettering when ordering. Maximum of two lines with characters on each line (including spaces). 00 Schneider Electric

11 Type XAA Worksheet Type XAA Worksheet Use this worksheet to assist in component selection. ustom orders for XAA pendant stations must be placed through the Product Selector in Quote to ash. There is a 0% charge for assembly. XAA Order Guide Instructions 4 ustom built pendant stations. Determine the number of operators needed, then choose an enclosure with a corresponding number of holes.. Select the type of operator, contact block, and appropriate nameplate for each function required. Refer to pages heck for special functions that may be required. These items could include mechanical interlocks, adapters for self-supporting cable, lower support rings, protective guards, etc. atalog number of enclosure XAA Functions (optional) Mechanical interlock (draw a vertical line between the units to be interlocked [] ) 4 Legends ontact blocks and pilot light bodies Push button Pilot light or Blanking plug Mechanical Interlock (XAA009) Mechanical interlock XAA009 Number of XAA009 required Possible ombinations Impossible ombinations Unit mounted in base of station (facing downwards) Attachments Position Type atalog No. 4 Adapters for self-supporting cable type BBAP (available only with cable sleeve Ø8 6 mm) XAB96 5 Lower support ring XAA97 6 Protective guard for base mounted selector switch or 40 mm emergency-stop push button XAA98 7 Protective guard for key switch XAA98 00 Schneider Electric /00

12 Type XAA Dimensions Type XAA Dimensions Small Hoist Type XAA0, A05, and A07 Internal dia. 9 to mm General Purpose Type XAA Internal dia. 8 to 0 mm to 4 mm 5 to 7 mm 8 to mm to 6 mm B A Small Hoist XAD Internal dia. 7 to 9 mm 0 to to 5 6 to 8 8 mm dia XA A XA A XA A Number of Holes Dimension in. mm in. mm in. mm in. mm in. mm in. mm A B /00 00 Schneider Electric

13 Type SKYP General Information Pendant Stations Type SKYP General Information Lifetime Enclosure Warranty This line of pendant stations consists of polymeric enclosures ( 0 units), push button units ( 5 speed), and laminated legend plates. All enclosures have an extra single-unit space near the top that permits the installation of a toggle switch, a Type SK operator or pilot light, or a warning label (see Table 9 on page 4). All enclosures come standard with a stainless-steel hanger bracket and internal strain-relief post. The enclosures are yellow with a threaded opening in the top. The complete line is UL Listed and SA certified, with NEMA Type environmental ratings,,, R, 4, 4X, and (NEMA 4 only with legend plates installed). To ensure Type 4X and integrity, use only Type 4X and operators or closing plates. There is a 0% charge for assembly. To place a custom pendant order, use the worksheet on page 7 as a guide. Orders must be placed through the Product Selector in Quote to ash. Type SKYP Specifications Table 4: Type SKYP Specifications Electrical Ratings Types SKRU SKRU5: A = NEMA / UL B00; D = NEMA / UL P600 Types SKRU, 0, : A = NEMA / UL A600: D = NEMA / UL P600 Enclosure Type UL Type,,, R, 4, 4X,, and Operating Temperature -0 to +60 (- F to +40 F) Storage Temperature -40 to +70 (-40 F to +58 F) Housing Material Polycarbonate able Entry / NPT Approvals File E7840 N NKR File LR 5490 lass 0 Table 5: Electrical ontact Ratings (Types SKRU through SKRU5) A NEMA / UL Type B00 Inductive, 5% Power Factor Resistive, 75% Power Factor Volts [] Make Break Make, Break, and ontinuous arrying Amperes A VA A VA ontinuous arrying Amperes OSHA Regulation, Section Overhead and Gantry ranes, limits the voltage at pendant push buttons to 50 Vac or 00 Vdc. Table 6: Electrical ontact Ratings (Types SKRU, 0, and ) Volts [] Make Amperes A NEMA / UL Type A600 Inductive, 5% Power Factor Break Amperes ontinuous arrying Amperes Resistive, 75% Power Factor Make, Break, and ontinuous arrying Amperes OSHA Regulation, Section Overhead and Gantry ranes, limits the voltage at pendant push buttons to 50 Vac or 00 Vdc. D Standard Duty, NEMA / UL Type P600 Volts Inductive and Resistive Make and Break Amperes ontinuous arrying Amperes Schneider Electric /00

14 Type SKYP Specifications Figure 4: 7 Terminals Terminals Hanger bracket (atalog no ) Threaded conduit hole Space for toggle switch, a Type SK operator, or a pilot light. Use appropriate legend plates. Type SKYP enclosure Type SKRU through SKRU operators. Any Type SK pilot light or operator can be mounted in this enclosure. The enclosure depth accommodates one Type KA through KA6 contact blocks (total of two). Type SKN legend plate SPEED POSITION OFF 868-D0 87 Terminals SPEED POSITION OFF Terminals 868-D9 88 SPEED POSITION 4 OFF Terminals 4 4 Terminals D 89 SPEED POSITION 4 OFF Terminals Terminals D 90 Single Speed ontact Symbols 5 Multispeed ontact Symbols (X = ontact losed) 0 losing Plate Type SK5 Table 7: Button Size Enclosures onduit Entrance Size [, ] Enclosure Only Type ¾"-4 NPT SKYP 4 ¾"-4 NPT SKYP4 6 "-½ NPT SKYP6 8 ¼"-½ NPT SKYP8 0 ¼"-½ NPT SKYP0 lass 900 SK push-to-test pilot lights, remote-test pilot lights, and potentiometers do not fit in these enclosures. Assembled pendant stations consist of an enclosure, operators, and legend plates. The price of the total station consists of the prices of the individual components, plus a 0% charge for assembly. To place a custom pendant order, use the worksheet on page 7 as a guide. Orders must be placed through the Product Selector in Quote to ash. Table 8: Push Button Units ( Buttons per Unit) Description ontact Symbol (Figure 4) Type [] Single Speed Momentary, Interlocked Single Speed Momentary, Non-Interlocked Single Speed Maintained, Interlock Two Speed Momentary, Interlocked Three Speed Momentary, Interlocked Four Speed Momentary, Interlocked Five Speed Momentary, Interlocked Types SKRU, 0, and include Type KA contact blocks. Types SKRU 5 are factory enclosed contact blocks. Boot for SKRU 5 = 900KU7; boot for SKRU, 0, = 900KU Table 9: Legend Plates 7 SKRU 5 SKRU0 0 SKRU 87 SKRU 88 SKRU 89 SKRU4 90 SKRU5 Where Used Marking Type For SKRU through SKRU With Toggle Switch [] in Top Space of Enclosure With Type SK Operator or Pilot Light [4] in Top Space of Enclosure Blank-Blank Hoist: Up-Down Trolley: East-West Trolley: Fwd.-Rev. Trolley: North-South Bridge: Fwd.-Rev. Bridge: East-West Bridge: North-South Start-Stop Reset-Stop Aux Hoist: Up-Down Power: On-Off Specify Marking Blank Off-On On-Off Specify Marking Blank On Off Emerg. Stop Run Power On Off-On Specify Marking Maximum of 9 characters on each side. Available as lass 900 Type SKSTS includes boot for NEMA Type 4X. Includes legend plate, gasket, and ground plate to be used with toggle switch. 4 See lass 900 Type SK on page 7. 5 Tri-laminated legend plate with a yellow or red background on a black core. SKN00 [] SKN0 SKN0 SKN0 SKN04 SKN05 SKN06 SKN07 SKN08 SKN09 SKN0 SKN SKN99 [] SKN500 [] SKN544 [] SKN545 [] SKN599 [] SKN00 [5] SKN0 SKN04 SKN05 SKN4 SKN8 SKN44 SKN99 [5] 4 /00 00 Schneider Electric

15 Type SKYP Specifications Table 0: Non-Illuminated and Illuminated Push Buttons Non-Illuminated Illuminated Description olor olor ode atalog No. Description olor olor ode Voltage atalog No. Position Red R SKR9R Position Red R Maintained Pull Maintained Push Red [] Black Red Green Blue Yellow White Orange lear Amber R B R G L Y W S A SKR9R05 SKR9 Maintained Pull Maintained Push Red [] Black Red Green Blue Yellow White Orange lear Amber Red knob available with Push Emergency Stop printed on the red knob. See Table 6 footnote for additional options. R R G L Y S A 0 Vac/Vdc Full Voltage 4 Vac/Vdc Full Voltage 4 Vac/Vdc Full Voltage SKR9P58R SKR9P55R05 SKR9P55 Table : Pilot Lights UL Types 4, 4X, /NEMA 4, 4X, and Description Voltage Style With Red Fresnel olor ap With Green Fresnel olor ap With Other olor ap Without olor ap 0 0 V, Hz Transformer SKPR SKPG SKP [] SKP Standard Pilot Light 0 40 V, Hz 4 8 Vac/Vdc Transformer Full Voltage SKP7R SKP5R SKP7G SKP5G SKP7 [] SKP5 [] SKP7 SKP5 (Fresnel color cap shown) See Table for other Transformer or LED [] SKP_R [] SKP_G [] SKP_ [] [] SKP [] 900SKP voltages. Full Voltage or Resistor SKP_R [] SKP_G [] SKP_ [] [] SKP [] Add the color code from Table. Example: SKP with an amber color Fresnel cap = SKPA. The cap must be the same color as the LED light module, e.g., use a green color cap for a green LED. See Table for voltage assembly code. Table : Standard Light Modules for Pilot Lights Voltage Description Light Module Type Voltage Assembly ode Rating Replacement Lamp atalog No. All Full Voltage (without Bayonet Base Lamp) KM40 40 None 6 Vac/Vdc Full Voltage KM 0.9 VA Vac/Vdc LED Red KMLR LR Vac/Vdc LED Green KMLG LG Vac/Vdc LED Yellow KMLY LY Vac/Vdc Full Voltage KM. VA Vac/Vdc LED Red KMLR LR Vac/Vdc LED Green KMLG LG Vac/Vdc LED Yellow KMLY LY Vac/Vdc Full Voltage KM5 5. VA Vac/Vdc LED Red KM5LR 5LR 0.8 VA Vac/Vdc LED Green KM5LG 5LG 0.8 VA Vac/Vdc LED Yellow KM5LY 5LY 0.8 VA Vac/Vdc LED White KM5LW 5LW 0.8 VA Vac/Vdc LED Blue KM5LL 5LL 0.8 VA V, Hz LED Red KMLR LR V, Hz LED Green KMLG LG V, Hz LED Yellow KMLY LY V, Hz Transformer KM.4 VA V, Hz Flashing KMF F 0.85 VA Vac/Vdc Resistor KM8 8.0 VA Vac/Vdc Full Voltage KM8 8.0 VA Vac/Vdc LED Red KM8LR 8LR.4 VA Vac/Vdc LED Green KM8LG 8LG.4 VA ontinued on next page 00 Schneider Electric /00 5

16 Type SKYP Specifications Table : Standard Light Modules for Pilot Lights (continued) Voltage All Description Full Voltage (without Bayonet Base Lamp) Light Module Voltage Assembly ode Rating Replacement Lamp 0 Vac/Vdc LED Yellow KM8LY 8LY.4 VA Vac/Vdc LED White KM8LW 8LW.4 VA Vac/Vdc LED Blue KM8LL 8LL.4 VA V, Hz Transformer KM7 7.0 VA V, Hz LED Red KM7LR 7LR V, Hz LED Green KM7LG 7LG V, Hz LED Yellow KM7LY 7LY Type atalog No. KM40 40 None Table : olor aps Table 4: ontact Blocks Plastic Fresnel Plastic Domed Description Symbol atalog Number olor Amber A A9 lear 9 Green G G9 Red R R9 Yellow Y Y9 lear olor over Red olor over Both N.. contacts are direct opening. KA KA Shallow Depth Light Modules For Type SK ontrol Units UL Listed and SA certified LED light modules use a lamp with a 7-element LED cluster that provides illumination similar to incandescent illumination. With LED light modules, use either a clear color cap or a cap with the same color as the LED. Table 5: Shallow Depth Light Modules For Type SK ontrol Units Voltage 4 8 Vac/Vdc 0 0 Vac/Vdc Description For Use With Single Lamp Ill. Operators as Indicated Light Module Type No. Voltage Rating Assembly ode (VA) Replacement Lamps ANSI No. atalog No. Full Voltage KM LED Red KM55LR 55LR All 900 SK 757 LED Green KM55LG 55LG LED Yellow KM55LY 55LY Full Voltage KM LED Red KM58LR 58LR All 900 SK 0MB LED Green KM58LG 58LG LED Yellow KM58LY 58LY Table 6: Maximum urrent Ratings For ontrol ircuit ontacts: Types KA KA6, KA 5, KA 5, KAG KA6G [] A D Inductive (NEMA / UL Type A600), 5% Power Factor Resistive, 75% Inductive and Resistive (NEMA Q600) Volts Make Break ontinuous Power Factor Volts Make and Break ontinuous Amperes VA Amperes VA arrying Make, Break, and KA KA5 arrying Amperes ontinuous Amperes KA KA4 KA KA6 Amperes For additional Type SK push button operators (illuminated and non-illuminated), light modules, and contact blocks, see catalog 900T960, Push Button and Operator Interface Specifiers Guide. All illuminated push button operators must use a shallow depth light module listed above. Only standard pilot lights and non-illuminated selector switches can be used in Type SKYP enclosures. 6 /00 00 Schneider Electric

17 Type SKYP Worksheet Type SKYP Worksheet ontrol Products Use this worksheet to assist in component selection. SKYP ustom Pendant orders must be placed through the Product Selector in Quote to ash. There is a 0% charge for assembly. lass 900 Type SKYP -. Operator or losing Plate. Example: SKRU. Legend Plate Type Number Example: SKN0. Legend Plate Marking Used Only if Special Marking is Required Example: Line = SKN99 Line = A.) Hoist B.) FWD.) REV Enclosures NEMA 4X, When the operator and the legend plate use adjacent holes, specify the same catalog numbers in both locations. Example: A SKRU B SKN0 SKRU SKN0 Hanger bracket Threaded conduit hole Type Number Key A) B) ) A) B) ) Space for a toggle switch ➀, a Type SK operator or pilot light, or a warning label. Use SKN5 or SKN legend plates. Button Size onduit Entrance Size Enclosure for Assembled Station Type ¾" -4 NPT SKYP0 Space for toggle switch ➀, a Type SK operator or pilot light, or a warning label. Use SKN5 or SKN legend plates. A) B) ) 4 ¾" -4 NPT SKYP40 6 " -4 NPT SKYP60 8 ¼" -½ SKYP80 0 ¼" -½ SKYP00 Type SKYP enclosure Type SKRU through SKRU operators. A) B) ) Assembled pendant stations consist of an enclosure, operators, and legend plates. The price of the total station consists of the price of each individual component plus a 0% charge for assembly. Push Button Units NEMA / UL 4X, Number of Buttons per Unit LOSING PLATE Type SK5 Description Single Speed Momentary, Interlocked Single Speed Momentary, Non-Interlocked Single Speed Maintained, Interlocked Two Speed Momentary, Interlocked Three Speed Momentary, Interlocked Four Speed Momentary, Interlocked Five Speed Momentary, Interlocked ontact Symbol Type 7 SKRU 5 SKRU0 0 SKRU 87 SKRU 88 SKRU 89 SKRU4 90 SKRU5 Type SKN legend plate Legend Plates NEMA / UL 4X, Where Used Marking Type For SKRU through SKRU With Toggle Switch ➀ in Top Space of Enclosure With Type SK Operator or Pilot Light in Top Space of Enclosure Blank Blank Hoist: Up-Down Trolley: East-West Trolley: Fwd.-Rev. Trolley: North-South Bridge: Fwd.-Rev. Bridge: East-West Bridge: North-South Start Stop Reset Stop Specify Marking Blank Off On On Off Specify Marking Blank On Off Emerg. Stop Run Power On Off-On Specify Marking Specify Marking (Red Background) SKN00 ➃ SKN0 SKN0 SKN0 SKN04 SKN05 SKN06 SKN07 SKN08 SKN09 SKN99 ➃ SKN500 ➁ SKN544 ➁ SKN545 ➁ SKN599 ➁ SKN00 ➂ SKN0 SKN04 SKN05 SKN4 SKN8 SKN44 SKN99 ➂ SKN99R ➂ ➀ Available as 900SKSTS ➁ Includes legend plate, gasket, and ground plate to be used with toggle switch. ➂ Tri-laminated legend plate with a yellow or red background on a black core. ➃ 9 characters each side. lass 900 Type SK push-to-test pilot lights and remote test pilot lights will not fit in these enclosures. A) B) ) A) B) ) A) B) ) A) B) ) A) B) ) A) B) ) Type SKRU through SKRU operators or Type SK operators and Type SKN legend plate. 00 Schneider Electric /00 7

18 Type SKYP Dimensions Type SKYP Dimensions lass 900 Type SK push-to-test pilot lights and remote-test pilot lights and potentiometers do not fit in these enclosures. Standard pilot lights do fit in these enclosures. For illuminated operators in the SKYP pendant station, the shallow depth light module (900KM55 or 900KM58) must be used. Figure 5: Type SKYP Dimensions A See Table 4 for NPT Size Dual Dimensions inches mm Table 7: Approximate Dimensions Number of Holes Per Unit Dimension A onduit Opening in. mm NPT ¾" ¾" " - ½ ¼" -½ ¼" -½ 8 /00 00 Schneider Electric

19 Type SKYP Dimensions INDEX BW BW DLB DLE DLE DLE DLE DLJUS DLJUS DLJUS DLJUS DLJUS DLJUS DLJUS DLJUS DLJUS DLJUS DLJUS DLJUS KA KA SKR SKR9P SKR9P55R SKR9P58R SKR9R SKR9R XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA XAA , XAA , XAA , XAB , XADA XADA XAS XAS XAS XAS XAS XENG XENG XENG XENG XENT ZABB ZABB ZAB ZABD ZABD ZABG ZABG ZABS ZABS ZABS ZABS ZABS ZABS ZABV ZABV ZABV ZABV ZABV ZABV ZBBE ZBBE ZBBV ZBBV ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBBY ZBSZ Schneider Electric /00 9

20 Schneider Electric USA, Inc. 800 Knightdale Blvd. Knightdale, N 7545 USA -888-Square D Square D and Schneider Electric are trademarks or registered trademarks of Schneider Electric and/or its affiliates in the United States and/or other countries. Other marks used herein may be the property of their respective owners. 900T00 00 Schneider Electric /00