Temperature Switches
|
|
- Rodger Snow
- 5 years ago
- Views:
Transcription
1 ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi, this model has an integral 8 mm temperature probe and can be screwed directly inline or into a hydraulic block. Different output models with one or two switching outputs, optionally with an additional analog output signal, offer a variety of application possibilities. The switching points and the associated hystereses can be adjusted very quickly and easily using the keypad. For optimum adaptation to the particular application, the unit has many additional adjustment parameters (e.g. switching delay times, N/C / N/O function, etc.). Special Features switching outputs, up to. A load per output Analog output selectable (4 to 0 ma / 0 to 0 V) 4-digit digital display Optimum alignment - display can be rotated in two planes (axes) Switching / reset points and many useful additional functions can be set using keypad of temperature and unit of measurement in C or F Approvals CE mark is a mandatory conformity mark on many products placed on the single market in the European Economic Area Technical Details Sensor Specifications Measuring range Probe length - pressure resistance Mechanical connection Tightening torque Parts in contact with media Accuracy (display, analog output) Temperature drift (ambient) Weight - to F (- to 00 C) 8 mm probe 9000 psi 00 mm probe 7 psi 0 mm probe 7 psi 0 mm probe 7 psi G/ A DIN 8 male lb-ft (4 Nm) Stainless steel, FPM seal F ( C) ±0.008% FS / F max. zero point ±0.008% / F max. range with 8 mm probe with 00 mm probe with 0 mm probe with 0 mm probe Approximately g Approximately 0g Approximately 8g Approximately 0g Output signal (selectable) 4 to 0 ma, ohmic resistance max. 00 Ω 0 to 0 V, ohmic resistance min. kω corresponds in each case to - to 00 C Switching Specifications Type PNP transistor Switching current.a per output Switching cycles 00 million Rise time to DIN EN 607 8mm probe other probes T0 : s / T90 : 9s T0 : 8s / T90 : s Environmental Condition Operating temperature range - to 76 F (- to 80 C) - to 40 F (- to 60 C) with UL rating Storage temperature range -40 to 8 F (-40 to 8 C) Media temperature range -40 to F (-40 to 00 C) CE mark EN / / / 4 mark (Environmental conditions to.4. UL Certificate no. E ; C. No. 600-) Vibration resistance 0g to DIN EN at 0 to 00 Hz Environmental protection IP 67 (ZBE 06 / 08 molded cable) Electrical Specifications Supply voltage -limited energyaccording to: 9 to VDC without analog output 8 to VDC with analog output 9. UL 600; Class ; UL 0/8; LPS UL 6090 Residual ripple suppy voltage % Current consumption max..4 A total max. ma with inactive switching outputs max. ma with analog output and inactive switching outputs Reverse polarity protection of the supply Standard voltage, excess voltage, override and short circuit protection 7 segment LED display, 4 digits 0 INNOVATIVE FLUID POWER
2 Model Code Mechanical Connection = G / A DIN 8, male with integral sensor Electrical Connection 6 = Mx plug, 4 pole for output codes & (connector not included) 8 = Mx plug, pole for output code (connector not included) ETS - X - X - XXXX Output = Switching Outputs (only with electrical connection 6) = Switching Output with analog output (only with electrical connection 6) = Switching Outputs with analog output (only with electrical connection 8) Probe Length 008 = 8mm (0.7 ) 000 = 00mm (.9 ) 00 = 0mm (9.84 ) 00 = 0mm (.8 ) Modification Number 400 = Standard (preset to F) Circuit Diagram 9 to V ETS XX6- Imax. A 4 SP Imax. A SP Pin Connections Mx, 4 pole 4 Mx, pole 4 Dimensions Pin 6-6- U B U B SP analog 0 V 0 V 4 SP SP Pin 8- U B analog 0 V 4 SP SP ø.6" (4mm).64" (9.mm) mode.99" (76mm) 8 to V ETS XX6-4 Imax. A SP I = 4 to 0 ma Analog 6kt-SW7 G / A DIN 8-E A (see Length in Model Code) (4mm) 0..6" (mm) 8 to V ETS XX8- Imax. A 4 SP Imax. A SP I = 4 to 0 ma Analog 0." (9.mm) Mx 0.6" (6mm) INNOVATIVE FLUID POWER
3 ETS 800 Series Temperature Switch with Separate Temperature Probe Applications Description The ETS 800 is a compact electronic temperature switch with a 4-digit digital display. In the model for separate temperature probe, the measuring range is -0 to 00 F and is used primarily with the temperature probe TFP 00 which was specially developed for tank mounting. It is also possible, however, to use standard PT 00 temperature probes. Different output models with one or two switching outputs, optionally with an additional analog output signal, offer a variety of application possibilities. The switching points and the associated hystereses can be adjusted very quickly and easily using the keypad. For optimum adaptation to the particular application, the unit has many additional adjustment parameters (e.g. switching delay times, N/C / N/O function, etc.). Special Features switching outputs, up to. A load per output Analog output selectable (4 to 0 ma / 0 to 0 V) 4-digit digital display Optimum alignment - display can be rotated in two planes (axes) Switching / switch-back points and many useful additional functions can be set using keypad s temperature Approvals CE mark is a mandatory conformity mark on many products placed on the single market in the European Economic Area Technical Details Sensor Specifications Measuring range Mechanical connection Temperature drift (ambient) Weight Output signal External Temperature Sensor Specifications Rated pressure for external sensor (TFP 00) Media temperature range Electrical connection Safety Sleeve Thermowell Parts in contact with medium Switching Specifications Type Switching current Switching cycles Environmental Condition Ambient temperature range Storage temperature range - to 0 F (-0 to 0 C) Cable connection Mx, 4-pole ±0.008% FS / F max. zero point ±0.008% / F max. range Approximately 87g 4 to 0 ma, ohmic resistance max. 00 Ω 0 to 0 V, ohmic resistance min. kω corresponds in each case to - to 00 C 4 psi (0 bar) -40 to 7 F (-40 to C) M8x, 4 pole Nickel-plated Brass PNP transistor.a per output 00 million - to 76 F (- to 80 C) - to 40 F (- to 60 C) with UL rating -40 to 8 F (-40 to 8 C) CE mark EN / / / 4 mark (Environmental conditions to.4. UL 600-; C. No. 600-) Vibration resistance to DIN EN at 0 to 00 Hz Environmental protection Electrical Specifications Supply voltage -limited energyaccording to: Certificate no. E89 0g Residual ripple suppy voltage % Current consumption Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection IP 67 (ZBE 06/08 molded cable) 9 to VDC without analog output 8 to VDC with analog output 9. UL 600; Class ; UL 0/8; LPS UL 6090 max..4 A total max. ma with inactive switching outputs max. ma with analog output and inactive switching outputs Standard 7 segment LED display, 4 digits INNOVATIVE FLUID POWER
4 Model Code Mechanical Connection 6 = Female cable connection Mx, 4 pole Electrical Connection 6 = Mx plug, 4 pole for output codes & (connector not included) 8 = Mx plug, pole for output code (connector not included) ETS 8 6 X - X Output = Switching Outputs (only with electrical connection 6) = Switching Output with analog output (only with electrical connection 6) = Switching Outputs with analog output (only with electrical connection 8) Probe Length 000 = For external temperature sensor (TFP 00) Modification Number 400 = Standard (preset to F) Supplied Accessories: A male connector M x, 4 pole and meter LIYCY 4x0. mm² are supplied with the device to connect to external temperature probe Non-Supplied Accessories: External Sensor (TFP 00) must be used with TFP 00 thermowell. TFP 00 Part Number: TFP 00 Thermowell (Safety Sleeve) Part Number: Pin Connections Mx, 4 pole 4 Mx, pole 4 Pin U B U B SP analog 0 V 0 V 4 SP SP Pin 86- U B analog 0 V 4 SP SP Circuit Diagram ETS XX6-9 to V 4 Imax. A SP Imax. A SP Dimensions.67" (9.mm) Mx mode 8 to V ETS XX6-4 Imax. A SP I = 4 to 0 ma Analog ~.0" (mm) ø 0.87" (mm) M x connector supplied 0.6" (6mm) connection cable LIYCY (0 length) supplied ZBE 0 plug 8 to V ETS XX8- Imax. A 4 SP Imax. A SP I = 4 to 0 ma Analog 0.6" (6.mm) 4.96" (6mm) (4mm) ø.06" (7mm) ø 0.76" (9.mm) 0.7" (8.mm).94" (00mm) (4mm) 6mm G / hex SW7 0." (mm) ø 0.4" (6mm) TFP 00 (temp. sensor) ø 0." (8mm) Safety Sleeve INNOVATIVE FLUID POWER
5 ETS 0 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 0 is a compact electronic temperature switch with a -digit digital display. Pressure resistant to 9000 psi with an integral 8 mm temperature probe, this model can be mounted directly inline or on the hydraulic block and has a measuring range of -0 to C. Different output models with one or two switching outputs, optionally with an additional analog output signal of 4 to 0 ma, offer a variety of application possibilities. The switching points and the associated hystereses can be adjusted very quickly and easily using the keypad. For optimum adaptation to the particular application, the unit has many additional adjustment parameters (e.g. switching delay times, N/C / N/O function, etc.). Special Features Compact temperature switch with integral temperature probe transistor switching outputs, up to. A load per output Option: analog output 4 to 0 ma -digit digital display Switching point or window function Switching / switch-back points and many useful additional functions can be set using the keypad Approvals CE mark is a mandatory conformity mark on many products placed on the single market in the European Economic Area Technical Details Sensor Specifications Measuring range Rated pressure - psi 9000 Mechanical connection Tightening torque Parts in contact with media Accuracy Temperature drift (ambient) Weight Output signal Switching Specifications Type Switching current Switching cycles Rise time to DIN EN 607 Environmental Condition Operating temperature range Storage temperature range Media temperature range - to F (- to 00 C) G/ A DIN 8 male lb-ft (4 Nm) Stainless steel, FPM seal ± F ( C) ±0.008% FS / F max. zero point ±0.008% / F max. range Approximately 00g 4 to 0 ma, wire, ohmic resistance max 400 Ω PNP transistor.a per output 00 million T0 : s T90 : 9s - to 76 F (- to 80 C) -40 to 76 F (-40 to 80 C) -40 to F (-40 to 00 C) CE mark EN / / / 4 Vibration resistance to DIN EN at 0 to 00 Hz 0g Environmental protection IP 6 Electrical Specifications Supply voltage Residual ripple suppy voltage % Current consumption Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection 0 to VDC 00 ma (plus switching current) Standard 7 segment LED display, digits 4 INNOVATIVE FLUID POWER
6 Model Code Mechanical Connection = G / A DIN 8, male with integral sensor Electrical Connection 6 = Mx plug, 4 pole for output codes & (connector not included) 8 = Mx plug, pole for output code (connector not included) ETS X - X - XXX - XXX Output = Switching Outputs (only with electrical connection 6) = Switching Output with analog output (only with electrical connection 6) = Switching Outputs with analog output (only with electrical connection 8) Measuring Range 00 = - to F Modification Number 000 = Standard in C 400 = Standard in F Pin Connections Mx, 4 pole 4 Mx, pole 4 Pin 6-6- U B U B nc analog 0 V 0 V 4 SP SP Pin 8- UB analog 0 V 4 SP SP Circuit Diagram Model ETS X6- switching outputs Dimensions Mx 0 to VDC - 4 ETS X6- lmax.. A SP lmax.. A SP.44" (87.mm) SP ETS PSI SP mode Model ETS X6- switching output, analog output 0 to VDC - 4 ETS X6- lmax.. A SP l = 4 to 0 ma analog 0." (mm) (4mm) 0.7" (8mm) G /A Model ETS X8- switching outputs, analog ouput 4 lmax.. A SP lmax.. A 0 to VDC ETS X8- SP l = 4 to 0 ma - analog ø 0.4" (6mm) ø.4" (mm Hex SW7.6" (9.mm) INNOVATIVE FLUID POWER
7 ETS 80 Series Temperature Switch with Separate Temperature Probe Applications Description The ETS 80 is a compact electronic temperature switch with a -digit digital display. In the model for separate temperature probe, the measuring range is -0 to 00 F and is used primarily with the temperature probe TFP 00 which was specially developed for tank mounting. It is also possible, however, to use standard PT 00 temperature probes. Different output models with one or two switching outputs, optionally with an additional analog output signal, offer a variety of application possibilities. Different output models with one or two switching outputs, optionally with an additional analog output signal of 4 to 0 ma, offer a variety of application possibilities. The switching points and the associated hystereses can be adjusted very quickly and easily using the keypad. For optimum adaptation to the particular application, the unit has many additional adjustment parameters (e.g. switching delay times, N/C / N/O function, etc.). Special Features transistor switching outputs, up to. A load per output Option: analog output 4 to 0 ma -digit digital display Switching point or window function Switching / reset points and many useful additional functions can be set using the keypad Approvals CE mark is a mandatory conformity mark on many products placed on the single market in the European Economic Area Technical Details Sensor Specifications Measuring range Mechanical connection Accuracy Temperature drift (ambient) Weight Output signal External Temperature Sensor Specifications Rated Pressure for external sensor (TFP 00) Media temperature range Electrical connection Safety Sleeve Thermowell Parts in contact with medium Switching Specifications Type Switching current Switching cycles Environmental Condition Ambient temperature range -0 to 00 F (-0 to 0 C) Cable connection Mx, 4-pole ± F ( C) ±0.008% FS / F max. zero point ±0.008% / F max. range Approximately 00g 4 to 0 ma, ohmic resistance max. 400 Ω 4 psi -40 to 7 F (-40 to C) M8x, 4 pole Nickel-plated Brass PNP transistor.a per output 00 million Storage temperature range -40 to 76 F - to 76 F (- to 80 C) CE mark EN / / / 4 Vibration resistance to DIN EN at 0 to 00 Hz 0g Environmental protection IP 6 Electrical Specifications Supply voltage Residual ripple suppy voltage % Current consumption Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection 0 to VDC 00 ma (plus switching current) Standard 7 segment LED display, digits 6 INNOVATIVE FLUID POWER
8 SP SP Temperature Switches Model Code Mechanical Connection 8 = Electrical connection for external sensor (TFP 00) Electrical Connection 6 = Mx plug, 4 pole for output codes & (connector not included) 8 = Mx plug, pole for output code (connector not included) ETS 8 X - X - XXX - XXX Output = Switching Outputs (only with electrical connection 6) = Switching Output with analog output (only with electrical connection 6) = Switching Outputs with analog output (only with electrical connection 8) Measuring Range 0 = - to 0 F (-0 to 0 C) Modification Number 000 = Standard in C 400 = Standard in F Pin Connections Mx, 4 pole 4 Mx, pole 4 Pin U B U B nc Analog 0 V 0 V 4 SP SP Pin 88- UB Analog 0 V 4 SP SP Supplied Accessories: A male connector M x, 4 pole and meter LIYCY 4x0. mm² are supplied with the device to connect to external temperature probe Non-Supplied Accessories: External Sensor (TFP 00) must be used with TFP 00 thermowell. TFP 00 Part Number: TFP 00 Thermowell (Safety Sleeve) Part Number: Dimensions Mx ø.4" (mm) ETS.97" (7.mm) PSI mode 0.67" (7mm) ~.0" (mm) ø 0.87" (mm) M x connector supplied.6" (9.mm) connection cable LIYCY (0 length) supplied ZBE 0 plug hex SW7 0.6" (6.mm) 4.96" (4mm) (6mm) ø.06" (7mm) ø 0.76" (9.mm) 0.7" (8.mm) (4mm) 6mm.94" (00mm) G / 0." (mm) ø 0.4" (6mm) TFP 00 (temp. sensor) ø 0." (8mm) Safety Sleeve INNOVATIVE FLUID POWER 7
9 ETS 700 Series Temperature Switch with Applications Description The electronic temperature switch ETS 700 is used mainly together with the temperature probe TFP 00, which was specially developed for tank mounting. The 4-digit display can indicate the actual temperature, one of the switching points or the maximum temperature. The maximum temperature indicates the highest temperature which has occurred since the unit was switched on or was last reset. The 4 switching outputs can be used to control heating and cooling processes in hydraulic systems, for example. These 4 switching and switch-back points which are independent of each other can be adjusted very simply via the keypad. For incorporation into monitoring systems (e.g. with PLC) an analog output (4 to 0 ma or 0 to 0 V) is also available. Special Features: 4-digit digital display Simple operation with key programming 4 limit relays, switching points and reset points can be adjusted independently Analog output signal selectable (4 to 0 ma or 0 to 0 V) Many useful additional functions Optional mounting position (pressure connection on the top/bottom, keypad and display can be turned through 80 ) Approvals CE mark is a mandatory conformity mark on many products placed on the single market in the European Economic Area Technical Details Sensor Specifications Measuring ranges Accuracy Temperature drift Weight Output signal External Temperature Sensor Specifications Rated Pressure for external sensor (TFP 00) to F (0 to 00 C) ± F ( C) ±0.07% / F max. zero point ±0.07% / F max. range Approximately 800 g 4 to 0 ma, ohmic resistance max. 400 Ω 0 to 0 VDC, ohmic resistance min. kω corresponds in each case to 0 to 00 C 4 psi Media temperature range -40 to 7 F Electrical connection Safety Sleeve Thermowell Parts in contact with medium Switching Specifications Type Switching voltage Switching current Switching power Set point range Reset point range Switching cycles Environmental Condition Operating temperature range Storage temperature range M8x, 4 pole Nickel-plated Brass 4 relays with change-over contacts in groups (common supply of each group connected) 00mV to 0 V (AC or DC) to A 400VA, 0 W (for inductive load use varistors). to 00% FS to 99% FS > 0 million at minimum load > million at maximum load - to 40 F (- to 60 C) -40 to 76 F (-40 to 80 C) CE mark EN / / / 4 Vibration resistance to DIN EN at 0 to 00 Hz g Environmental protection IP 6 Electrical Specifications Supply voltage Residual ripple suppy voltage 0% Current consumption Electrical connection Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection to VDC approximately 00 ma 4 pole terminal block Standard 7 segment LED display, 4 digits, mm high 8 INNOVATIVE FLUID POWER
10 SP SP SP SP4 Temperature Switches Model Code ETS 70 XX - X = 4 digit C 0 = 4 digit F Measuring Range 00 = - to F (0 to 00 C) Modification Number 000 = Standard cable glands, mounting screw, a pole female connector (Binder series 68) for connecting the separate temperature probe and a 0 sensor cable (LIYCY 4x0. mm ) are supplied with the unit. Other accessories, such as vibration mounts, etc. can be found in the Accessories section. Dimensions PG Cable gland ( places) 4.96" (6mm) 4.49" (4mm) Pin Connections Device Connection Pin U B 0 V Analog output signal 4 Analog output signal - (0 V) Relay N/C 6 Relay N/O 7 Center relay and 8 Relay N/C 9 Relay N/O 0 Relay N/C Relay N/O Center relay and 4 Relay 4 N/C 4 Relay 4 N/O Plug Connection Internal view of pin connections (on the ETS 700) -pole Binder connector, series ETS 700 pole Binder connector series 68.9" (0mm) Pin = supply Pin = signal Pin = reserved Pin 4 = - signal Pin = - supply = plug housing for screen.76" (9.mm)." (84mm) mode ON OFF ON OFF reset max ON OFF max ON OFF C ETS700 - Internal view of pin connections (on the TFP 00) 4-pole Binder connector, series pole Binder connector series 74 TFP 00 countersunk DIN 74-Km (4 places).46" (7mm) connection line LIYCY (0 long) pole DIN Circular M6x0.7 connection port centerline." (80mm)." (8.mm) Pin = supply Pin = signal Pin = - signal Pin 4 = - supply sensor resistance TFP 00 Safety Sleeve External Sensor (TFP 00) must be used with TFP 00 thermowell. TFP 00 Part Number: TFP 00 Thermowell (Safety Sleeve) Part Number: M8x ø.06" 7mm 0.6" 6.mm ø.06" 7mm Mx 0.6" 6.mm 0.7" 8.mm hex SW7 0." mm ø 0.76" 9.mm ø 0.76" 9.mm 0.6" 4mm G / 4mm 4.96" 6mm 4mm 4.96" 6mm.94" 00mm.0" 6mm ø 0.4" 6mm ø 0.4" 6mm ø 0." 8mm INNOVATIVE FLUID POWER 9
Electronic Level Switch ENS 3000
Electronic Level Switch ENS 3000 Description: The ENS 3000 is an electronic level switch with integrated display. The instrument has 1, 2 or 4 switching outputs and an analogue output signal is available
More informationElectronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 Description: The EDS 300 is a compact, electronic pressure switch with integral digital display. Four different output models are available: with one switching point,
More informationDistance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
More informationLinear Position Transducer HLT 1000-R2
Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
More informationElectronics Transmitters, Switches, Diagnostics
www.comoso.com Electronics Transmitters, Switches, Diagnostics www.comoso.com About HYDAC HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 1000 distributors worldwide
More informationStand: ELECTRONIC Product News 2010
Stand: 13.10.2010 ELECTRONIC Product News 2010 Content Page Linear Position Sensors - HLT 1000 for mobile applications 5 - HLT 2000 for industrial applications 7 Electronic Position Switch - HLS 100 9
More informationDisplay and Monitoing Units
Display and Monitoing Units DISPLAY AND MONITOrING UNITS 13 The universal display unit HDA 5500 provides the means of visualizing and further processing the signals from our sensors. The unit is designed
More informationLinear Position Transducer HLT 1000-R2
7 Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
More information1 open / 1 close, 240 V ac / 2 A. < 70 ma < 65 ma ac 20 Hz 13 Hz dc 72 Hz 25 Hz
Description Operation mode and max sensing range: Diffuse proximity: 0-5 m Background suppression: 0- m Compact rectangular housing (x mm) Cable or rotatable plug connection via potentiometer Switch selectable
More informationLevel and temperature switch Nivotemp NT-M, NT-MD
Level and temperature switch Nivotemp NT-M, NT-MD Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored. Here, modern factory automation requires compatible
More informationOnline data sheet TBS-1BSGT3506FM TBS TEMPERATURE SENSORS
Online data sheet TBS-1BSGT3506FM TBS A B C D E F Illustration may differ Detailed technical data Features Ordering information Type Part no. TBS-1BSGT3506FM 6053202 Other models and accessories www.sick.com/tbs
More informationElectronic pressure switch with display Model PSD-4
Electronic pressure measurement Electronic pressure switch with display Model PSD-4 WIKA data sheet PE 81.86 Applications Machine tools Hydraulics and pneumatics Pumps and compressors Special-purpose machine
More informationLevel and temperature switch Nivotemp NT-M, NT-MD
Level and temperature switch Nivotemp NT-M, NT-MD Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored. Here, modern factory automation requires compatible
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationElectronics. Safe, Accurate, Reliable
Electronics Safe, Accurate, Reliable About HYDAC HYDAC stands for worldwide presence and accessibility to the customer. HYDAC has over 000 distributors worldwide and more than 0 wholly owned branches.
More informationOEM Products for Large Volume Production:
OEM Products OEM Products for Large Volume Production Areas of application for our OEM products for large volume production range from mobile and stationary industrial hydraulics, to pneumatics, machine
More informationTSE. Functional Description. Order Code TSE HA /2010. Electrical Pressure Switch N D. p max up to 400 bar (5801 PSI)
Electrical Pressure Switch TSE HA 90 /010 p max up to 400 bar (5801 PSI) Electronic pressure switch TSE To monitor the pressure in the circuit and the signalisation switching after reaching pre-set pressure
More informationFlow measurement FlexFlow PF20S Flow sensor for industrial applications
Product highlights Parallel measurement of flow and temperature Flow measurement independent of the mounting position Large measuring range up to 400 cm/s Measurement at high media temperatures up to 125
More informationBulletin 871D Cylinder Position Inductive Style
Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal
More informationInstallation Instructions Temperature transmitter TAA /00 06/2011
Installation Instructions Temperature transmitter TAA431 706042/00 06/2011 Contents 1 Functions and features...3 2 Installation...4 2.1 Addressing...4 2.2 Mechanical installation...4 2.3 Connection to
More information21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
More informationElectronic Temperature Switches. Catalogue. Electronic Temperature Switches. Control. Overview. every move
Electronic Temperature Switches Catalogue Electronic Temperature Switches Overview Control every move Content Content Overview 3 Electronic Temperature Transducer 3 UTA2 3 Electronic Temperature Sensors
More informationCondition Monitoring Unit CMU 1000
Condition Monitoring Unit CMU 1000 15 Description: The CMU1000 is an electronic evaluation unit designed for permanent online condition monitoring of machines and systems. In order to achieve this, the
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationFaults on the system Proximity switch connection technology:
Speed monitor for connection to a base unit from the PNOZmulti modular safety system Approvals Unit features Monitoring of 2 independent axes Connection of 2 incremental encoders or 4 proximity switches
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationJUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
More informationLevel- and temperature sensor Nivotemp NT 67-XP
Level- and temperature sensor Nivotemp NT 67-XP Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires
More informationRotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
More informationPortable Data Recorder HMG 500
13 Portable Data Recorder HMG 500 14 Description: Special features: Portable 2-channel data recorder Simple and user-friendly key operation Large LCD display including battery status indication 2 sensor
More informationIndustrial Pressure Transmitter
NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationStandardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
More informationInductive proximity switches with long operating distance, series 500
Inductive proximity switches with long operating distance, series 500 Highlights World's longest operating distances on steel Sizes Ø 4... M30 embeddable (Ø 4 and M5), (... M30) and non-embeddable (M...
More informationLevel- and temperature sensor Nivotemp NT M-XP
Level- and temperature sensor Nivotemp NT M-XP Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires
More informationElectrical connection
IS 230 Foo & Beverage Inuctive switches Dimensione rawing Part No. 501 11727 20mm 10-30 V DC 100 Hz embee Slim an short cylinrical metal housing M30x1.5 V4A / AISI 316L stainless steel housing ECOLAB teste
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 7 safety contacts (N/O), instantaneous 2 auxiliary contacts (N/C),
More informationProcess displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More informationInclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More information4. Sensing Distance. 2: 2 mm. 4: 4 mm 8: 8 mm 15: 15 mm 16: 16 mm 20: 20 mm
Inductive Sensor Double Sensing Distance Model Number Legend SALIENT FEATURES IP - 7, Brass Housing Short - Circuit protection Reverse Polarity Protection Shielded and Non - Shielded Prewired and Connector
More informationModular pressure transmitters for harsh environments DST P500, DST P507 and DST P550
Data sheet Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550 The P500 / P507 / P550 utilizes the thin film strain gauge sensing technology, incorporating an hermetically
More informationthe Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
More informationMillenium II +: general characteristics
Millenium II +: general characteristics Starter kit Blind Temperature sensors Special starter kits Bare board Power supply Level detection Local extensions Accessories Standard Expandable Adjacent extensions
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationCompact Inductive Proximity Sensor
SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter
More informationRetro-reflective photoelectric sensors with polarisation filter. Dimensioned drawing. Electrical connection
Retro-reflective photoelectric sensors with polarisation filter Dimensioned drawing 0 1.85m 10-30 V DC We reserve the right to make changes 96_b06e.fm Retro-reflective photoelectric sensor for safe detection
More informationTechnical Data Measuring principle Bellow Repeatability ± 0.5 % FS typ.
Picostat Pressure Switch Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The 9B4 of the Picostat series
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
More informationXMLR400M1P25 Pressure sensors XMLR 400bar - G 1/4-24VDC ma - PNP - M12
Characteristics Pressure sensors XMLR 400bar - G 1/4-24VDC - 4..20 ma - PNP - M12 Complementary Current consumption Electrical connection Type of output signal Analogue output function Discrete output
More informationDMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
More informationE-STOP relay, safety gate monitor
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection options
More informationTechnical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection ATEX & IECEX certifications Usable up to SIL 2 acc. to IEC 61508 Weatherproof
More informationDVZ - Vortex Flowmeter and Switch
Measuring Ranges: 0.13-1.2 GPM to 2.7-26 GPM Accuracy: ±2.5 % of F.S. Vortex Shedding Technology with No Moving Parts Ryton Body with Nickel Plated Brass or 316 SS Fittings Outputs: Analog, Frequency,
More informationDIGITAL DISPLAY. for Industry Applications. Series WAY-SSI. Key-Features:
DIGITAL DISPLAY for Industry Applications Series WAY-SSI Key-Features: Content: Technical Data.2 Technical Drawing...2 Electrical Connection...3 Description...4 Order Code & Accessories...6 - WAY-SSI-S:
More informationMagnetically Actuated Safety Interlock Switches
Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic,
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 5 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Connection
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
More informationMPS-32. Pressure Sensors MPS-32 2-Color Panel Mount. Features. Green Display. MPS-32 Programming Options
Features MPS- Green Display MPS-VN-PC ure Sensors Features ure Ranges: Vacuum ure 0 to -0 inhg Positive ure 0 to 5 PSI Sensor : NPN or PNP Open Collector Transistor, 0VDC, 5mA Optional Analog, to 0mA Optional
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationMagnetic Style Safety Interlock Switches
Non-contact safety interlock switches are the best choice for washdown applications; the switch components are sealed and rated NEMA 4X, IEC IP67 Tolerant of dirt buildup, sensing distance, and alignment
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationTemperature measurement TER8 Front-flush and low-invasive resistance thermometers
Product highlights 3-A fulfillment without elastomers Front-flush or immersed types Accurate reading independent on ambient temperature Fast response time Hermetically sealed towards process Capable of
More informationInstallation Sensing distance Connection Output configuration Operation mode NO Operation mode NC
Standard (thin shape) Inductive Proximity Sensor Thin shape for space saving surface mounting Direct side wall mounting for bracket-less installation Ordering Information DC 3-wire Models Installation
More informationProximity sensors SME-8M, for T-slot Technical data Magnetic reed
Function e.g., 3-wire, with cable e.g., 3-wire, with plug Magnetic reed measuring principle Insertable in the slot from above, does not protrude over the cylinder profile Cable clip and inscription labels
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology
More informationBasic Series 18 mm Diameter Cylindrical Sensors
Diffuse Mode See pages 384-385 Features: Light on/dark on mode determined by wiring Adjustable sensitivity Sensing Ranges: 2 mm, 5 mm Outputs: NPN, PNP Thru-Beam Mode See pages 387-388 Features: Laser
More informationEnergetic diffuse reflection light scanner. Dimensioned drawing
Energetic diffuse reflection light scanner Dimensioned drawing We reserve the right to make changes 93_c3gb.fm Part No. 51 1168 1-3 V DC 5 17mm 1mm Infrared light Background suppression through appropriate
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationMiniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm
Electronic pressure measurement Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further approvals see page 5 MicroTronic
More informationFork light barriers SOOF
Product range overview Method of measurement Size Min. object diameter Max. switching frequency Switching output Type of light Page/ Internet [mm] [mm] [Hz] Metal light barrier SOOF-M- -C30 30x35 0.5 4,000
More informationDiffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 3B Standard Dimensioned drawing We reserve the right to make changes DS_HRTR3B_Standard_en_51734.fm en 13-213/3 51734 1-3 V DC 1 khz A 2 LS 5 4mm 2mm with black-white
More informationADVANCED ultrasonic sensors with 2 switching outputs. Dimensioned drawing
Dimensioned drawing en 2-214/2 5124879 25 4mm 15 13mm 15-3 V DC We reserve the right to make changes DS_HTU418BX3LT4_en_5124879.fm Largely surface-independent function, ideal for the detection of liquids,
More informationSALES NUMBER NUMBER OF BEAMS PROTECTIVE HEIGHT
SECTION 21 182 Safety Light Curtains Type: SLC-F Finger (14mm) FEATURES: Resolution: 14mm Protective height: 160mm to 1040mm Type 4 according to IEC61496-1 and -2 ORDERING INFORMATION: SALES OF BEAMS PROTECTIVE
More informationDIMENSION/WEIGHT kpa. 0 to 20 m / 0 to 60 ft 0 to 2 bar / 0 to 29 psi. 0 to 50 m / 0 to 160 ft 0 to 5 bar / 0 to 72.5 psi
V161102 Liquid Level Sensor Sensor for measuring the level of liquid in a well or tank USE / PURPOSE The range of liquid level sensors use pressure to measure the liquid level in a well or tank. The sensors
More informationPositive-guided relay outputs: 4 safety contacts (N/O), instantaneous
Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 4 safety contacts (N/O), instantaneous LED indicator for: Switch status channel
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Data Sheet 4000 Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology Brief description
More information14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
More informationPressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2
Electronic pressure measurement Pressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2 WIKA data sheet PE 81.53 Applications Test bench construction Water jet
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8695 can be combined with Compact stainless steel design Integrated analog valve position registration (Teach function) Coloured illuminated
More informationFerrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
More informationOIL FILLED MELT PRESSURE TRANSMITTERS. W7 PERFORMANCE LEVEL c SERIES Voltage output
OIL FILLED MELT PRESSURE TRANSMITTERS W7 PERFORMANCE LEVEL c SERIES Voltage output The W7 Performance Level c series of Gefran, are pressure transmitters for using in High temperature environment. The
More informationE-STOP relays, safety gate monitors
E-STOP relays, safety gate monitors Up to Category 2, EN 954-1 Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More informationOIL FILLED MELT PRESSURE TRANSMITTERS. W7 PERFORMANCE LEVEL c SERIES Voltage output
OIL FILLED MELT PRESSURE TRANSMITTERS W7 PERFORMANCE LEVEL c SERIES Voltage output The W7 Performance Level c series of Gefran, are pressure transmitters for using in High temperature environment. The
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
More informationProduct Catalog. Represented by Norstat Inc. in North America
Product Catalog Represented by Norstat Inc. in North America About MP-Sensor MP-SENSOR a Technology Company located in Neuhausen in the south of Germany near Stuttgart is a company specializing in the
More informationHead-separated Dual Display Digital Pressure Sensor DPC-L100 SERIES DPH-L100 SERIES. High-precision detection of fluid and air pressure
689 PHOTO PHOTO Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-17 Sensor selection guide... P.661~ Related Information Glossary of terms... P.1373~ General
More informationFlexible temperature transmitter and sensor
/ processing unit without display senso a mperature senso TT/TC series TT/TC ser Flexible temperature transmitter and sensor The of the TT/TC series detect temperature with a Pt100 4-wire probe. Available
More informationVM series. features. web contents. code description. available models. inductive sensors. Cylindrical M12 in AC B H
VM series Cylindrical M2 in AC inductive sensors warranty features warranty Output: cable and M2 plug cable exit Models with 2 wires IP67 protection degree Multivoltage 20...253 Vac web contents Application
More informationPressure Transmitter type 548 with display and programmable switching outputs
Pressure Transmitter type 548 with display and programmable switching outputs Pressure range... 0 40 bar The øpregulated, programmable pressure transmitter type 548 has a robust industry design. The parameters
More informationElectronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Pressure Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics and pneumatics Pumps and
More informationGX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available
8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming
More informationImmersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
More informationP30-2. Overview. Pressure Transmitter Datasheet. *High Quality* 3 Years Warranty. At a Glance. Function. Application
P30-2 Pressure Transmitter Datasheet At a Glance *High Quality* 3 Years Warranty Premium Pressure Transmitter for gauge and pressure measurement with 3 years warranty High repeatability and long-term stability
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More information02/11/2015
24 x 48 Hour CTR24 non-backlit model Part number 87622162 Display : 8-digit LCD, height 8 mm Built-in module for voltage inputs 10 260 VAC/DC () 4 timing ranges : 99,999.99 hrs - 99,999.59 hrs - 999,999.9
More information