Vydané publikácie IEC (od 1. októbra 2011 do 31. októbra 2011)

Transcription

1 Electrical engineering IEC SER ed1.0 ( ) Insulation co-ordination - ALL PARTS IEC SER ed1.0 ( ) Primary batteries - ALL PARTS IEC ed2.0 ( ) Method of sampling insulating liquids IEC ed4.0 ( ) Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance IEC ed7.0 ( ) Corrigendum 1 - Luminaires - Part 1: General requirements and tests IEC SER ed1.0 ( ) Insulation coordination for equipment within low-voltage systems - ALL PARTS IEC/TR ed2.0 ( ) Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC series, dimensioning examples and dielectric testing IEC ed1.2 ( ) Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC ed2.0 ( ) Terminal markings for valve device stacks and assemblies and for power conversion equipment IEC ed1.0 ( ) Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors IEC ed1.0 ( ) Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies IEC ed1.0 ( ) Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment IEC ed2.0 ( ) Structuring of technical information and documentation IEC ed2.0 ( ) Preparation of object lists, including parts lists IEC ed2.0 ( ) Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements IEC ed1.0 ( ) Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories IEC SER ed1.0 ( ) High-voltage switchgear and controlgear - ALL PARTS 1

2 IEC ed2.0 ( ) High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv IEC ed1.0 ( ) Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear IEC ed1.0 ( ) Articulated systems and flexible systems for cable guiding Electromagnetic compatibility CISPR 16-SER ed1.0 ( ) Specification for radio disturbance and immunity measuring apparatus and methods - ALL PARTS CISPR ed3.0 ( ) Corrigendum 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus IEC ed2.0 ( ) Corrigendum 2 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances IEC/TR ed1.0 ( ) Electromagnetic compatibility (EMC) - Part 3-14: Assessment of emission limits for harmonics, interharmonics, voltage fluctuations and unbalance for the connection of disturbing installations to LV power systems Electronics IEC/TR ed2.0 ( ) Safety of laser products - Part 13: Measurements for classification of laser products IEC ed2.0 ( ) Corrigendum 1 - Connectors - Safety requirements and tests Energy & heat transfer engineering IEC SER ed1.0 ( ) Photovoltaic devices - ALL PARTS IEC ed1.0 ( ) Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods Fibre optic communications IEC/TR ed1.0 ( ) Guidance on techniques for the measurement of the coefficient of friction (COF) between cables and ducts Graphical symbols IEC/TR ed1.0 ( ) Mnemonics and designations of symbols for measuring relays, instruments and related device IEC ed1.1 ( ) Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols 2

3 Manufacturing engineering IEC ed2.0 ( ) Industrial electroheating equipment - Test methods for submerged-arc furnaces IEC ed1.0 ( ) OPC unified architecture - Part 4: Services IEC ed1.0 ( ) OPC unified architecture - Part 5: Information Model IEC ed1.0 ( ) OPC unified architecture - Part 6: Mappings IEC ed1.0 ( ) OPC unified architecture - Part 8: Data Access Medical electrical equipment IEC ed2.0 ( ) Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs Metrology & measurement IEC SER ed1.0 ( ) High-voltage test techniques - ALL PARTS IEC ed2.0 ( ) Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves IEC ed3.0 ( ) Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods Multimedia IEC SER ed1.0 ( ) Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC ALL PARTS IEC am1 ed2.0 ( ) Amendment 1 - Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC Part 1: General IEC am1 ed2.0 ( ) Amendment 1 - Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC Part 2: Burst-info IEC/TR ed1.0 ( ) Professional tape-less camera recorder Railway engineering IEC ed2.0 ( ) Corrigendum 1 - Railway applications - Rolling stock equipment - Shock and vibration tests 3

4 IEC/TS ed1.0 ( ) Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure Safety IEC SER ed1.0 ( ) Safety of machinery - Electrical equipment of machines - ALL PARTS IEC/TR ed2.0 ( ) Effects of current on human beings and livestock - Part 4: Effects of lightning strokes Shipbuilding & marine structures IEC SER ed1.0 ( ) Mobile and fixed offshore units - Electrical installations - ALL PARTS Telecommunications IEC SER ed1.0 ( ) Power systems management and associated information exchange - Data and communications security - ALL PARTS Terminology IEC am1 ed1.0 ( ) Amendement 1 - International Electrotechnical Vocabulary - Part 617: Organization/Market of electricity ISO/IEC publications ISO/IEC am1 ed1.0 ( ) Amendment 1 - Identification cards -- Contactless integrated circuit cards -- Proximity cards -- Part 2: Radio frequency power and signal interface - Limits of electromagnetic disturbance levels parasitically generated by the PICC ISO/IEC am1 ed1.0 ( ) Amendment 1 - Identification cards -- Contactless integrated circuit cards -- Proximity cards -- Part 3: Initialization and anticollision - Electromagnetic disturbance handling and single-size unique identifier ISO/IEC ed1.0 ( ) Corrigendum 2 - Information technology -- Coding of audio-visual objects -- Part 3: Audio ISO/IEC am40 ed1.0 ( ) Amendment 40 - Information technology -- Coding of audio-visual objects -- Part 4: Conformance testing - ExtendedCore2D conformance ISO/IEC am5 ed1.0 ( ) Corrigendum 1 - Amendment 5 - Information technology -- Coding of audio-visual objects -- Part 5: Reference software - Reference software extensions for error resilient simple scalable profile - Amendment 5 - Information technology -- Coding of audio-visual objects -- Part 5: Reference software ISO/IEC am10 ed1.0 ( ) Corrigendum 5 - Amendment 10 - Information technology -- Coding of audio-visual objects -- Part 5: Reference software - SSC, DST, ALS and SLS reference software - Amendment 10 - Information technology -- Coding of audiovisual objects -- Part 5: Reference software ISO/IEC am29 ed1.0 ( ) Amendment 29 - Information technology -- Coding of audio-visual objects -- Part 5: Reference software - Reference software for LASeR presentation and modification of structured information (PMSI) tools 4

5 ISO/IEC am1 ed1.0 ( ) Amendment 1 - Information technology -- Coding of audio-visual objects -- Part 15: Advanced Video Coding (AVC) file format - Sub-track definitions ISO/IEC ed4.0 ( ) Information technology -- Coding of audio-visual objects -- Part 16: Animation Framework extension (AFX) ISO/IEC ed1.0 ( ) Corrigendum 4 - Information technology -- Coding of audio-visual objects -- Part 26: Audio conformance ISO/IEC/TR ed1.0 ( ) Information technology - Implementation and operation of customer premises cabling - Part 2-1: Planning and installation - Identifiers within administration systems ISO/IEC ed1.0 ( ) Information technology - Small computer systems interface (SCSI) - Part 372: Enclosure Services - 2 (SES-2) ISO/IEC ed1.0 ( ) Information technology -- Personal identification -- ISO-compliant driving licence -- Part 4: Test methods ISO/IEC ed1.0 ( ) Information technology -- Radio frequency identification device performance test methods -- Part 1: Test methods for system performance ISO/IEC ed1.0 ( ) Information technology -- Document Schema Definition Languages (DSDL) -- Part 11: Schema association ISO/IEC ed1.0 ( ) Corrigendum 1 - Information technology -- Biometric data interchange formats -- Part 4: Finger image data ISO/IEC am2 ed1.0 ( ) Amendment 2 - Information technology -- Multimedia framework (MPEG-21) -- Part 8: Reference software - Reference software for media value chain ontology (MVCO) ISO/IEC am1 ed1.0 ( ) Corrigendum 1 - Amendment 1 - Information technology -- MPEG audio technologies -- Part 1: MPEG Surround - Conformance testing - Amendment 1 - Information technology -- MPEG audio technologies -- Part 1: MPEG Surround ISO/IEC am2 ed2.0 ( ) Corrigendum 2 - Amendment 2 - Information technology -- MPEG audio technologies -- Part 1: MPEG Surround - Reference software - Amendment 2 - Information technology -- MPEG audio technologies -- Part 1: MPEG Surround ISO/IEC ed1.0 ( ) Information technology -- Media context and control -- Part 7: Conformance and reference software ISO/IEC/TR ed1.0 ( ) Information technology -- Programming languages, their environments and system software interfaces -- Extensions for the programming language C++ to support decimal floating-point arithmetic ISO/IEC/TR ed1.0 ( ) Information technology -- Document description and processing languages -- Minimum requirements for specifying document rendering systems -- Part 2: Formatting specifications for document rendering systems ISO/IEC ed1.0 ( ) Information technology -- Radio frequency identification (RFID) for item management -- Software system infrastructure -- Part 2: Data management ISO/IEC/TR ed1.0 ( ) Information technology -- Security techniques -- Guidelines for auditors on information security controls 5

6 ISO/IEC/TR ed1.0 ( ) Information technology -- Automatic identification and data capture techniques -- Direct Part Mark (DPM) Quality Guideline ISO/IEC ed1.0 ( ) Information technology -- Mobile item identification and management -- Consumer privacy-protection protocol for Mobile RFID services ISO/IEC ed1.0 ( ) Information technology - UPnP device architecture - Part 19-10: Solar Protection Blind Device Control Protocol - Two Way Motion Motor Service 6