o SIPLUS LOGO! MODULAR BASIC VARIANTS

Transcription

1 o SIPLUS LOGO! MODULAR BASIC VARIANTS The space-saving basic variants Interface for the connection of expansion modules, up to 24 digital inputs, 16 digital outputs, 8 analog inputs and 2 analog outputs can be addressed With connection option for LOGO! text display TD (can be connected to all LOGO! 0BA6 basic versions) Note: SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added. Page 1 Mar 2008 Siemens ITS

2 SIPLUS LOGO! 24 SIPLUS LOGO! 12/24RC SIPLUS LOGO! 24RC SIPLUS LOGO! 230RC Order number 6AG CC01-2BA6 6AG FB00-2BA6 6AG HB00-2BA6 6AG MD00-2BA6 Order No. based on 1CC01-0BA6 Ambient -25 C to +70 temperature range Conformal coating Technical data Ambient conditions 1FB00-0BA6 1HB00-0BA6 1MD00-0BA6 -Coating of the printed circuit boards and the electronic components -The technical data of the standard product applies except for the environmental conditions. Relative humidity % Condensation permissible

3 Biologically active substances Chemically Active substances Mechanically active substances Air pressure (depending on the highest positive temperature range specified) - Conformity with EN , Class 3B2 mold and fungal spores (except fauna) - Conformity with EN , Class 3C4 incl. salt mist and ISA S71.04 severity level G1; G2; G3; GX 1)2) - Conformity with EN , Class 3S4 including conductive sand, dust 2) hpa ( m) see ambient temperature range hpa ( m) derating 10 K hpa ( m) derating 20 K 1) ISA-S71.04 severity level GX: Long-term load: SO 2 < 4.8 ppm; H 2 S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O 3 < 0.1 ppm; NOX < 5.2 ppm Limit value (max. 30 min/d): SO 2 < 17.8 ppm; H 2 S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O 3 < 1.0 ppm; NOX < 10.4 ppm 2) The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases! The technical documentation on SIPLUS can be found here:

4 Design LOGO! 0BA6 Relay outputs with up to 10 A output current (not LOGO! 24). Integrated display field with parameterizable backlight (4 x 12 characters). Integrated operator control panel. Integrated EEPROM memory for control program and setpoint values. Optional program module for copying and know-how protection. Optional battery module and combined battery/program module for backing up the integral real-time clock over 2 years. Integral real-time clock with automatic summer/winter time adjustment. 8 digital inputs, 4 digital outputs. 4 inputs as analog inputs in 12/24 V DC variants (0 to 10 V); inputs can also be used digitally. 4 inputs can be used for high-speed counting up to 5 khz (DC versions only). Interface for the connection of expansion modules, up to 24 digital inputs, 16 digital outputs, 8 analog inputs and 2 analog outputs can be addressed. Interface for connecting the LOGO! TD text display. Page 4 Mar 2008 Siemens ITS

5 LOGO! 0BA7: Ethernet interface (replaces the serial programming interface of the previous series) Relay outputs with max. 10 A output current Integrated display field with parameterizable backlight (4 x 12 characters). Integrated operator control panel. Integrated EEPROM memory for control program and setpoint values. Optional standard SD cards or SIMATIC memory cards Integral real-time clock with automatic summer/winter time adjustment. 8 digital inputs, 4 digital outputs. 4 inputs as analog inputs in 12/24 V DC variants (0 to 10 V); inputs can also be used digitally. 4 inputs can be used for high-speed counting up to 5 khz (DC versions only). Interface for the connection of expansion modules, up to 24 digital inputs, 16 digital outputs, 8 analog inputs and 2 analog outputs can be addressed. Interface for connecting the LOGO! TD text display Page 5 Mar 2008 Siemens ITS

6 Function Integrated basic and special functions: Basic logic functions: AND, OR, NOT, NAND, NOR, XOR, positive/negative pulse edge evaluation. Special functions: ON delay, latching ON delay, OFF delay, impulse relay, locking relay, counter (forward/backward), time switch, interval time-delay relay, operating hours counter, trigger, asynchronous pulse generator, year time switch, comfort light switch function, random generator, staircase light switch function as per DIN , edge-triggered interval time-delay relay, combined ON/OFF delay, analog comparator, analog trigger, analog delta trigger, analog watchdog, analog amplifier, text and variable display, shift register, soft key function, PI controller, ramp function, analog multiplexer, PWM function, analog arithmetic function, function for detecting errors in the analog arithmetic function 200 function blocks can be interlinked 27 bit memories (including startup bit memory, 2 bit memories for controlling the backlight of the integral display and the LOGO! TD, bit memory for switching between 2 parameterizable character sets in the message text). Integrated retentivity. Password protection. Function available as an option Additional know-how protection with the program module available as an option. Backing up the integral real-time clock (not LOGO! 24) with the optionally available battery module and combined battery/program module for 2 years Connection of the optionally available LOGO! TD text display to all..0ba6 Basic versions Page 6 Mar 2008 Siemens ITS

7 Additional functions for LOGO! 0BA7 Data logging to internal memory or SD card Macros (user-defined functions) for LOGO! Soft Comfort V7 400 function blocks can be interlinked 16 analog bit memories 64 open terminals 4 8-bit shift registers New special functions: Astronomical clock, analog filter, mean value calculation, min/max value, stop watch Diagnostic functions Page 7 Mar 2008 Siemens ITS

8 Technical specifications Supply voltage 1CC01-0BA6 12 V DC Yes 1MD00-0BA6 24 V DC Yes Yes Yes 1HB00-0BA6 115 V DC Yes 230 V DC Yes permissible range, 20.4 V 10.8 V 20.4 V 100 V lower limit (DC) permissible range, 28.8 V 28.8 V 28.8 V 253 V upper limit (DC) 24 V AC Yes 1FB00-0BA6 Page 8 Mar 2008 Siemens ITS

9 115 V AC Yes 230 V AC Yes Time of day Time switching clocks Power reserve 80 h 80 h 80 h 80 h Digital inputs Number/binary inputs 8; Of which 4 can be8; Of which 4 can be used in analog mode used in analog mode (0 (0 to 10 V) to 10 V) 8 8 Digital outputs Number/binary outputs 4; Transistor 4; Relay 4; Relay 4; Relay Functionality/shortcircuit strength Yes; electrical (1 A) No; external fusing necessary No; external fusing necessary No; external fusing necessary Output current for signal "1" 0.3 A permissible range for 0 to 55 C, max. Page 9 Mar 2008 Siemens ITS

10 Switching capacity of contacts with inductive load, max. Switching frequency/contact s/at ohmic load/maximum EMC Emission of radio interference acc. to EN Emission of radio interference acc. to EN (limit class Yes; Radio interference suppression according to EN55011, Limit Value Class B 3 A 3 A 3 A 10 A 10 A 10 A Yes Yes Yes Ambient conditions B) Operating temperature Min. 0 C 0 C 0 C 0 C max. 55 C 55 C 55 C 55 C Page 10 Mar 2008 Siemens ITS

11 Degree and class of protection IP20 Yes Yes Yes Yes Standards, approvals, certificates CSA approval Yes Yes Yes Yes UL approval Yes Yes Yes Yes FM approval Yes Yes Yes Yes Marine approval Yes Yes Yes Yes Developed according to IEC1131 Yes Yes Yes Yes according to VDE 0631 Yes Yes Yes Yes Mounting Mounting on 35 mm DIN rail, 4 spacing units wide on 35 mm DIN rail, 4 spacing units wide on 35 mm DIN rail, 4 spacing units wide on 35 mm DIN rail, 4 spacing units wide Dimensions Width 72 mm 72 mm 72 mm 72 mm Height 90 mm 90 mm 90 mm 90 mm Page 11 Mar 2008 Siemens ITS Depth 55 mm 55 mm 55 mm 55 mm

12 1MD00-0BA7 Supply voltage 12 V DC Yes 24 V DC Yes 115 V DC Yes 230 V DC Yes permissible range, lower limit (DC) 10.8 V 100 V permissible range, upper limit (DC) 28.8 V 253 V 115 V AC Yes 230 V AC Yes Time of day Time switching clocks Power reserve 480 h 480 h Digital inputs Number/binary inputs 8; Of which 4 can be used in analog mode (0 to 10 V) 1FB00-0BA7 Digital outputs Number/binary outputs 4; Relay 4; Relay Functionality/short-circuit strength No; external fusing necessary No; external fusing necessary Relay outputs Switching capacity of contacts with inductive load, max. 3 A 3 A Switching frequency/contacts/at ohmic10 A 10 A load/maximum EMC Emission of radio interference acc. to EN Emission of radio interference acc. Yes; Radio interference to EN (limit class B) suppression according to EN55011, Limit Value Class B Page 12 Mar 2008 Siemens ITS 8 Yes; Radio interference suppression according to EN55011, Limit Value Class B

13 Ambient conditions Operating temperature Min. 0 C 0 C max. 55 C 55 C Degree and class of protection IP20 Yes Yes Standards, approvals, certificates CSA approval Yes Yes UL approval Yes Yes FM approval Yes Yes Marine approval Yes Yes Developed according to IEC1131 Yes Yes according to VDE 0631 Yes Yes Mounting Mounting On 35 mm DIN rail, 6 On 35 mm DIN rail, 6 spacing units wide spacing units wide Dimensions Width 107 mm 107 mm Height 90 mm 90 mm Page 13 Depth Mar mm 55 mm Siemens ITS