CPU 412H. Function. Parameterizable properties

Transcription

1 CPU 412H Function Block protection: In addition to the keylock switch, a password concept protects the user program from unauthorized access. Integrated HMI services: In the case of HMI devices, the user only has to specify the source and destination of the data. These are automatically transferred cyclically by the system. Integral communications functions: PG/OP communication Extended communication (simple and fault-tolerant) Parameterizable properties With the STEP 7 tool "Hardware Configuration" and the installed option package S7-400H, the properties and behavior of the S7-400H including the CPUs can be parameterized, e.g.: Multipoint-capable MPI interface: Determination of node addresses. Startup/cyclic behavior. Page 1303 Mar 2008 Siemens ITS

2 Definition of maximum cycle time and communication load. Address assignment: Addressing of the I/O modules. Retentive areas: Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories. Protection level: Definition of access authorization to program and data. System diagnostics: Determination of handling and scope of diagnostics messages. Watchdog interrupts: Setting periodicity. Configuring of H stations. Safety-related functions With the F runtime license, the safety-related F user program can be compiled and run on the CPU. One license is required for each S7-400F/FH system. The scope of supply includes 2 TÜV (German technical inspectorate) stickers. Technical specifications Page 1304 Mar 2008 Siemens ITS

3 Technical specifications Product version Hardware product version 1 Firmware version V4.5 General information associated programming package 6ES HJ14-0AB0 STEP7 V 5.3 SP2 or higher with HW update CiR - Configuration in RUN CiR synchronization time, basic load 150 ms CiR synchronization time, time per I/O slave40 µs Supply voltage 24 V DC ; Power supply via system power supply Page 1305 Mar 2008 Siemens ITS

4 Input current from backplane bus 5 V DC, max. 1.5 A from interface 5 V DC, max. 90 ma; At each DP interface Power losses Power loss, typ. 5.5 W Memory Work memory integrated 768 Kibyte integrated (for program) 512 Kibyte integrated (for data) 256 Kibyte expandable Load memory expandable FEPROM expandable FEPROM, max. 64 Mbyte integrated RAM, max. 256 Kibyte expandable RAM expandable RAM, max. 64 Mbyte Backup present with battery ; all data without battery CPU-blocks DB Number, max ; Number range: 1 to 4095 Page 1306 Mar 2008 Siemens ITS

5 Size, max. 64 Kibyte FB Number, max ; Number range: 0 to 2047 Size, max. 64 Kibyte FC Number, max ; Number range: 0 to 2047 Size, max. 64 Kibyte OB Size, max. 64 Kibyte Nesting depth per priority class 24 additional within an error OB 1 CPU processing times for bit operations, min µs for word operations, min µs for fixed point arithmetic, min µs for floating point arithmetic, min µs Counters, timers and their retentivity S7 counter Number Retentivity adjustable 0 Page 1307 Mar 2008 Siemens ITS

6 lower limit upper limit Z 0 to Z 7 preset Counting range 0 lower limit 999 upper limit IEC counter present Type SFB S7 times Number Retentivity adjustable 0 lower limit upper limit times retentive preset Page 1308 Mar 2008 Siemens ITS

7 Time range lower limit upper limit IEC timer present Type Data areas and their retentivity retentive data area, total 10 ms s SFB Total working and load memory (with backup battery) Flag Number, max. 8 Kibyte Retentivity available Retentivity preset MB 0 to MB 15 Number of clock memories 8; (in 1 memory byte) Local data adjustable, max. 16 Kibyte preset 8 Kibyte Address area I/O address area Inputs 8 Kibyte Outputs of which, distributed 8 Kibyte Page 1309 Mar 2008 Siemens ITS

8 2 Kibyte MPI/DP interface, inputs 2 Kibyte MPI/DP interface, outputs Process image Inputs, adjustable 8 Kibyte Outputs, adjustable 8 Kibyte Inputs, default 256 byte Outputs, default 256 byte consistent data, max. 244 byte Access to consistent data in process image Subprocess images Number of subprocess images, max. 15 Digital channels Inputs Outputs Inputs, of which central Outputs, of which central Analog channels Inputs Outputs Inputs, of which central Outputs, of which central Hardware configuration Page 1310 Mar 2008 Siemens ITS

9 Expansion devices, max. 21 Multicomputing Interface modules Number of connectable IMs (total), max. 6 Number of connectable IM 460s, max. 6 Number of connectable IM 463s, max. 4; Single mode only Number of DP masters integrated 1 via CP 10 Mixed mode IM + CP permitted via interface module 0 Number of operable FMs and CPs (recommended) FM CP, point-to-point PROFIBUS and Ethernet CPs Time of day Clock Hardware clock (real-time clock) battery-backed and synchronizable See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections 14; Of which max. 10 CP as DP master Page 1311 Mar 2008 Siemens ITS

10 Resolution 1 ms Deviation per day (buffered), max. 1.7 ms; Power off Deviation per day (unbuffered) max. 8.6 ms; Power on Operating hours counter Number 8 Number/Number range 0 to 7 Range of values 0 to hours Granularity 1 hour retentive Clock synchronization supported to MPI, master to MPI, slave to DP, master to DP, slave in AS, master in AS, slave 1st interface Type of interface integrated Physics RS 485 / PROFIBUS + MPI Isolated Power supply to interface (15 to 30 V 150 ma DC), max. Number of connection resources MPI: 16, DP: 16 Page 1312 Mar 2008 Siemens ITS

11 Functionality MPI DP master DP slave MPI Number of connections 16 Services PG/OP communication Routing Global data communication S7 basic communication S7 communication Transmission rate, max. 12 Mbit/s DP master Number of connections, max. 16 Services PG/OP communication Page 1313 Mar 2008 Siemens ITS

12 Global data communication S7 basic communication S7 communication Equidistance mode support SYNC/FREEZE Activation/deactivation of DP slaves Direct data exchange (slave-to-slave communication) Transmission rate, max. 12 Mbit/s Number of DP slaves, max. 32 Address area 2 Kibyte Inputs, max. 2 Kibyte Outputs, max. User data per DP slave 244 byte User data per DP slave, max. Page 1314 Mar 2008 Siemens ITS

13 Inputs, max. Outputs, max. Slots, max. per slot, max. DP slave Number of connections 3rd interface Type of interface Plug-in interface modules 4th interface Type of interface Plug-in interface modules Communication functions PG/OP communication Number of connectable OPs without message processing Number of connectable OPs with message processing 244 byte 244 byte Page 1315 Mar 2008 Siemens ITS byte configuration of CPU as DP slave Pluggable synchronization submodule (FO) Synchronization submodule IF 960 6ES AA04-0XA0 Pluggable synchronization submodule (FO) Synchronization submodule IF 960 6ES AA04-0XA0 15 8

14 Global data communication supported S7 basic communication supported S7 communication supported as server as client User data per job, max. User data per job (of which consistent), max. S5-compatible communication supported Page 1316 Mar 2008 Siemens ITS User data per job, max. User data per job (of which consistent), max. Number of simultaneous AG-SEND/AG- RECV orders per CPU, max. Standard communication (FMS) supported Number of connections overall 16 S7 message functions 64 Kibyte 462 byte; 1 variable ; (via CP max. 10 and FC AG_SEND and FC AG_RECV) 8 Kibyte 240 byte 24/24 ; Via CP and loadable FB

15 Number of login stations for message 8 functions, max. Symbol-related messages Block related messages simultaneously active Alarm-S blocks, max. 100 Alarm 8-blocks Number of instances for alarm 8 and S7 600 communication blocks, max. preset, max. 300 Process control messages Test commissioning functions Status/control Status/control variable Variables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters Number of variables, max. 70 Forcing Forcing Force, variables Inputs/outputs, bit memories, distributed I/Os Number of variables, max. 256 Status block Single step Number of breakpoints 4 Page 1317 Mar 2008 Siemens ITS

16 Diagnostic buffer present Number of entries, max adjustable 120 preset Isochronous mode Isochronous mode equidistance Configuration Configuration software STEP 7 programming Programming language LAD FBD STL SCL ; With hardware update as of STEP7 V5.3 SP2 Page 1318 Mar 2008 Siemens ITS

17 CFC GRAPH HiGraph Command set see instruction list Nesting levels 8 Know-how protection User program protection/password protection Dimensions Width 50 mm Height 290 mm Depth 219 mm Required slots 2 Weight Weight, approx. 990 g Page 1319 Mar 2008 Siemens ITS

18 Display and information functions Status and fault indicators: LEDs indicate, for example, internal and external faults and operating statuses such as RUN, STOP, startup, "Master" operating mode, redundancy errors, and test function. Test functions: The programming device can be used to display signal states in the program execution sequence, modify process variables independently of the user program, output contents of stack memories, run through program steps individually, and disable program sections. Information functions: The user can obtain information about the memory capacity and operating mode of the CPU, and the current utilization of the RAM and load memory. Page 1320 Mar 2008 Siemens ITS