K8N-E Deluxe. Motherboard

Size: px

Start display at page:

Download "K8N-E Deluxe. Motherboard"

Jeremy Nicholson
5 years ago
Views:

1 K8N-E Deluxe Motherboard

2 C ii

3 iii

4 iv

5 v

6 vi

7 vii

8 viii

9 ix

10 Jumper Mode Jumper Free (Default) x

11 xi

12 xii

15 1-1

16 1-2

17 1-3

18 1-4

19 1-5

20 1-6

23 SB_PWR K8V-E K8N-E Onboard LED ON Standby Power OFF Powered Off 2-1

24 2-2

25 2-3 PANEL K8N-E CD AUX FP_AUDIO USB2.0 GAME ATX12V CHASSIS IE1394_2 COM2 USB78 SB_PWR CHA_FAN USBPW12 USBPW cm (9.6in) 30.5cm (12.0in) SATA1 USB56 SATA2 SATA_RAID1 CPU_FAN PWR_FAN Socket 754 SATA_RAID2 SATA_RAID3 SATA_RAID4 CLRTC COM1 SPDIF_O SPDIF_O2 SATA Link USBPW56 USBPW CLRTC Normal Clear CMOS (Default) V (Default) +5VSB USBPW12 USBPW V (Default) +5VSB USBPW56 USBPW78

26 2-4

27 2-5

28 2-6

29 2-7

30 2-8

31 2-9

32 2-10

33 K8V-E 80 Pins 104 Pins DIMM1 DIMM2 DIMM3 K8N-E 184-Pin DDR DIMM Sockets 2-11

34 2-12

35 2-13

36 2-14

37 INT A INT B INT C INT D INTE 2-15

38 K8N-E Keyed for 1.5v K8N-E Accelerated Graphics Port (AGP) 2-16

39 CLRTC K8N-E K8N-E Clear RTC RAM Normal (Default) Clear CMOS 2-17

40 USBPW12 USBPW V (Default) +5VSB USBPW56 USBPW K8N-E K8N-E USB Device Wake Up +5V (Default) +5VSB 2-18

42 FLOPPY PIN 1 K8N-E K8N-E Floppy Disk Drive Connector 2-20

43 K8N-E PRI_IDE SEC_IDE K8N-E IDE Connectors PIN

44 SATA2 SATA1 K8V-E K8N-E SATA Connectors GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND 2-22

45 SATA_RAID1 SATA_RAID3 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND SATA_RAID2 SATA_RAID4 K8N-E K8N-E SATA RAID Connectors GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND 2-23

46 CPU_FAN Rotation +12V GND K8N-E K8N-E 12-Volt Fan Connectors PWR_FAN GND +12V Rotation CHA_FAN Rotation +12V GND COM2 PIN 1 K8N-E K8N-E Serial COM2 Bracket 2-24

47 ATX12V ATXPWR K8N-E GND +12V DC GND +12V DC Pin VDC +5VSB PWR_OK COM +5.0VDC COM +5.0VDC COM +3.3VDC +3.3VDC +5.0VDC +5.0VDC -5.0VDC COM COM COM PS_ON# COM -12.0VDC +3.3VDC K8N-E ATX Power Connectors 2-25

48 K8N-E K8N-E USB 2.0 Headers USB56 1 USB+5V USB_P6- USB_P6+ GND NC USB+5V USB_P5- USB_P5+ GND USB78 1 USB+5V USB_P8- USB_P8+ GND NC USB+5V USB_P7- USB_P7+ GND 2-26

49 CD (Black) Right Audio Channel Ground Left Audio Channel AUX (White) K8N-E K8N-E Internal Audio Connectors TPA0- GND TPB0- +12V GND K8N-E K8N-E IEEE-1394 Connector IE1394_2 1 TPA0+ GND TPB0+ +12V 2-27

50 FP_AUDIO MIC2 AGND MICPWR +5VA Line out_r BLINE_OUT_R NC Line out_l BLINE_OUT_L K8N-E K8N-E Front Panel Audio Connector K8N-E K8N-E Game Connector GAME +5V +5V J1B1 J2B1 J1CX J2CX GND MIDI_OUT GND J2CY J1CY J2B2 J1B2 MIDI_IN +5V 2-28

51 CHASSIS +5VSB_MB Chassis Signal GND K8N-E K8N-E Chassis Alarm Lead (Default) 2-29

52 Power LED PLED+ Speaker Connector +5V Ground Ground Speaker PLED- IDE_LED+ IDE_LED- PWR Ground Reset Ground Reset SW ATX Power K8N-E IDE_LED Switch* * Requires an ATX power supply. K8N-E System Panel Connector 2-30

55 3-1

56 3-2

57 3-3

58 3-4

59 3-5

60 3-6

61 3-7

62 3-8

65 4-1

66 A:\>afudos /ik8ne.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file... done Erasing flash... done Writing flash... 0x0008CC00 (9%) 4-2

67 A:\>afudos /ik8ne.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file... done Erasing flash... done Writing flash... 0x0008CC00 (9%) Verifying flash.. done A:\> Main filename Extension name A:\>afudos /omybios03.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash... 0x0008CC00 (9%) 4-3

68 A:\>afudos /omybios03.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading flash... done A:\> User recovery requested. Starting BIOS recovery... Checking for floppy

69 User recovery requested. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file K8NE.rom. Completed. Start flashing... Flashed successfully. Rebooting. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy

70 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file K8NE.rom. Completed. Start flashing... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file K8NE.rom. Completed. Start flashing

71 4-7

72 4-8

73 4-9

System Time [11:51:19] System Date [Thu 08/05/2003] Legacy

[Not Detected] Secondary IDE Slave : [Not Detected] Use

74 System Time [11:51:19] System Date [Thu 08/05/2003] Legacy Diskette A [1.44M, 3.5 in] Language [English] Primary IDE Master : [ST320413A] Primary IDE Slave : [ASUS CD-S340] Secondary IDE Master : [Not Detected] Secondary IDE Slave : [Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. System Information 4-10

System Time [11:10:19] System Date [Thu 03/27/2003] Legacy Diskette A [1.

Slave :[Not Detected] Third IDE Master :[Not Detected] Fourth IDE Master

Select Screen Select Item +- Change Field Tab Select Field F1 General

Setting wrong values in the sections below may cause system to

Configure DRAM Timing by SPD Memory Acceleration Mode DRAM Idle Timer

75 System Time [11:10:19] System Date [Thu 03/27/2003] Legacy Diskette A [1.44M, 3.5 in] Language [English] Primary IDE Master :[ST320413A] Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Secondary IDE Slave :[Not Detected] Third IDE Master :[Not Detected] Fourth IDE Master :[Not Detected] IDE Configuration System Information Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit Advanced Chipset settings WARNING: Setting wrong values in the sections below may cause system to malfunction. Configure DRAM Timing by SPD Memory Acceleration Mode DRAM Idle Timer DRAm Refresh Rate [Enabled] [Auto] [Auto] [Auto] Graphic Adapter Priority [AGP/PCI] Graphics Aperture Size [ 64 MB] Spread Spectrum [Enabled] ICH Delayed Transaction [Enabled] MPS Revision [1.4] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-11

76 System Time [11:51:19] System Date [Thu 08/05/2003] Legacy Diskette A [1.44M, 3.5 in] Language [English] Primary IDE Master :[ST320413A] Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Secondary IDE Slave :[Not Detected] Third IDE Master :[Not Detected] Third IDE Slave :[Not Detected] Fourth IDE Master :[Not Detected] Fourth IDE Slave :[Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. System Information 4-12

77 Primary IDE Master Device : Hard Disk Vendor : ST320413A Size : 20.0GB LBA Mode : Supported Block Mode : 16 Sectors PIO Mode : Supported Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 SMART Monitoring: Supported Type [Auto] LBA/Large Mode [Auto] Block(Multi-sector Transfer) [Auto] PIO Mode [Auto] DMA Mode [Auto] Smart Monitoring [Auto] 32Bit Data Transfer [Disabled] Select the type of device connected to the system 4-13

78 AMI BIOS Version : Build Date : 03/31/04 Processor Type : AMD Athlon(tm) 64 Processor Speed : 2000MHz Count : 1 System Memory Size : 512MB 4-14

79 Instant Music Configuration JumperFree Configuration Speech Configuration Configure CPU. CPU Configuration Chipset Onboard Devices Configuration PCI PnP Instant Music Option Instant Music [Disabled] If enabled, power up by PS/2 keyboard function will be disabled. 4-15

80 Configure System Frequency/Voltage AI Overclock Tuner [Standard] AGP Overclock in MHz [ 66] Mode Select [Auto] DDR RAM Voltage [Auto] AGP Voltage [1.5V] 4-16

81 Speech Option Speech Post Reporter Report IDE Error Report System Booting [Enabled] [Disabled] [Disabled] Disabled/Enable Speech 4-17

82 Type : AMD Athlon(tm) 64 Processor Speed : 2000MHz AMD Cool N Quiet Configuration GART Error Reporting [Disabled] AMD Cool & Quiet Configuration Cool N Quiet [Disabled] Enable/Disable AMD K8 Cool N Quiet function. 4-18

83 Memory CLK : 200 MHz CAS Latency : 2.5 DRAM RAS TO CAS Delay : 3 CLK DRAM ACTIVE TIME : 8 CLK DRAM RAS PRECHANGE TIME : 3 CLK MemClock Mode [Auto] CAS Latency [Auto] DRAM CAS to CAS Delay [Auto] DRAM RAS PRECHANGE Time [Auto] DRAM ACTIVE TIME [Auto] Master ECC Enabled [Disabled] Audio CODEC Interface [Auto] Primary Video [PCI] Aperture Size [ 128 MB] AGP FW Enable [Auto] AGP SideBand Address [Auto] Onboard Device USB Configuration MEMCLK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values. 4-19

84 4-20

VIA 1394 Enable/Disable Silicon Image Mode MAC Interface Onboard LAN Boot ROM Internal SATA IDE Interface RAID Option ROM Primary Master as RAID Primary Slave as RAID Secondary Master as RAID

85 VIA 1394 Enable/Disable Silicon Image Mode MAC Interface Onboard LAN Boot ROM Internal SATA IDE Interface RAID Option ROM Primary Master as RAID Primary Slave as RAID Secondary Master as RAID Secondary Slave as RAID Third Master as RAID Fourth Master as RAID [Enabled] [RAID Mode] [Enabled] [Disabled] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Enabled] [Enabled] Silicon Image SATA/ RAID BOOTROM Configuration 4-21

86 USB Configuration Module Version USB Devices Enabled: None USB Controller Support [USB 1.1+USB 2.0] Legacy USB Support [Auto] USB 2.0 Controller Mode [HiSpeed] Enables USB host controllers. 4-22

87 Configure ITE8712 Super IO Chipset Serial Port1 Address [3F8/IRQ4] Serial Port2 Address [2F8/IRQ3] Parallel Port Address [378] Parallel Port Mode [EPP+ECP] EPP Version [1.9] ECP Mode DMA Channel [DMA3] Parallel Port IRQ [IRQ7] OnBoard Game Port [Enabled] 4-23

88 4-24

Device] IRQ5 [PCI Device] IRQ7 [PCI Device] IRQ9 [PCI Device] IRQ10 [PCI Device] IRQ11 [PCI Device] IRQ14 [PCI Device] NO: Lets the BIOS configure all the devices in the system.

89 Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Plug And Play O/S [No] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] Palette Snooping [Disabled] PCI IDE BusMaster [Enabled] OffBoard PCI/ISA IDE Card [Auto] IRQ3 [PCI Device] IRQ4 [PCI Device] IRQ5 [PCI Device] IRQ7 [PCI Device] IRQ9 [PCI Device] IRQ10 [PCI Device] IRQ11 [PCI Device] IRQ14 [PCI Device] NO: Lets the BIOS configure all the devices in the system. YES: Lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system. IRQ15 DMA Channel 0 DMA Channel 1 DMA Channel 3 DMA Channel 5 DMA Channel 6 DMA Channel 7 Reserved Memory Size [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [PCI Device] [Disabled] 4-25

90 4-26

91 Suspend Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC Support APM Configuration Hardware Monitor [S1 (POS) & S3 (STR] [No] [No] [Enabled] Select the ACPI state used for System Suspend. 4-27

92 PME Resume RI Resume Onboard LAN Resume RTC Resume Resume On PS/2 Keyboard Restore On PS/2 Mouse Restore on AC Power Loss [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Power Off] 4-28

93 Hardware Monitor MB Temperature [35ºC/95ºF] CPU Temperature [48ºC/118ºF] CPU Fan Speed [3260RPM] Chassis Fan Speed [N/A] Power Fan Speed [N/A] VCORE Voltage [ 1.520V] 3.3V Voltage [ 3.280V] 5V Voltage [ 5.086V] 12V Voltage [11.742V] Smart Q-Fan Control [Disabled] CPU Temperature 4-29

94 4-30

Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE]

95 Boot Settings Boot Device Priority Boot Settings Configuration Security Specifies the Boot Device Priority sequence. Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE] [PM-ST320413A] [SM-ASUS CD-S360] Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu. 4-31

96 Hard Disk Drives 1st Drive [PM-ST330620A] 2nd Drive [NVIDIA MIRROR 111.] Specifies the boot sequence from the available devices. Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Wait for F1 If Error Hit DEL Message Display Interrupt 19 Capture [Enabled] [Enabled] [Force BIOS] [On] [Auto] [Enabled] [Enabled] [Disabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. 4-32

97 Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password Clear User Password <Enter> to change password. <Enter> again to disable password. 4-33

98 Security Settings Supervisor Password : Installed User Password : Not Installed Change Supervisor Password User Access Level [Full Access] Change User Password Clear User Password Password Check [Setup] Boot Sector Virus Protection [Disabled] <Enter> to change password. <Enter> again to disabled password. 4-34

99 4-35

100 Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes. F10 key can be used for this operation. 4-36

101

102

103 5-1

104 5-2

105 5-3

106 5-4

107 5-5

108 5-6

109 5-7

110 5-8

111 5-9

112 5-10

113 5-11

114 5-12 Esc F1 F2 F3 F5 F6 F7 F8 F4

115 5-13

116 5-14

117 5-15

118 5-16

119 5-17

120 5-18

121 5-19

122 5-20

123 5-21

124 5-22

125 5-23

126 5-24

127 5-25

128 5-26

P4B533-X. Motherboard

P4B533-X. Motherboard P4B533-X Motherboard C1458 2003 2 3 4 5 6 7 1 2 2 3 Jumper Mode Jumper Free (Default) 8 9 10 1-1 1-2 1-3 1-4 SB_PWR1 P4B533-X P4B533-X Onboard LED ON Standby Power OFF Powered Off 1-5 CPU_FAN1 ATX12V1