SIMATIC. Process Control System PCS 7 Released modules (V8.2) Security information 1 ET 200M 2. Gateway 3 ET 200PA SMART 4 ET 200S 5.

Size: px
Start display at page:

Download "SIMATIC. Process Control System PCS 7 Released modules (V8.2) Security information 1 ET 200M 2. Gateway 3 ET 200PA SMART 4 ET 200S 5."

Transcription

1 SIMATIC rocess Control System CS 7 Offer overview Valid for CS 7 as of V8.2 Security information 1 ET 200M 2 Gateway 3 ET 200A SMART 4 ET 200S 5 ET 200iS 6 ET 200S 7 ET 200S 8 ET 200X 9 ET 200pro 10 Repeater 11 Network Components 12 C 13 C-based automation 14 CS 7 15 S S SILUS modules 18 Appendix A 11/2016 A5E AB

2 Legal information arning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. ARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified ersonnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. roper use of Siemens products Note the following: Trademarks ARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. roper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability e have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Division rocess Industries and Drives ostfach NÜRNBERG GERMAN A5E AB 11/2017 Subject to change Copyright Siemens AG All rights reserved

3 Table of contents 1 Security information ET 200M IM Accessories Gateway IE/B Link D link FF Link Compact FF Link Link A coupler Optical link module Accessories ET 200A SMART AI AO DI DO IM Accessories ET 200S AI AO DI DO IM S Terminal module ET 200iS AI AI-F...31 Offer overview, 11/2016, A5E AB 3

4 Table of contents 6.3 AO DI DI-F DO DO-F IM S EM atchdog Couplers Terminal module ET 200S AI AO DI DO FM IM S Terminal module Motor starter F motor starter Motor starter accessories TM motor starter ET 200S AI AO DI DO IM Server module Bus adapter ET 200X AI AO Offer overview, 11/2016, A5E AB

5 Table of contents 9.3 BM_DI BM_DO DI DO S Valve ET 200pro AI AO DI DO F_DI F_DI/DO IM S Connection modules Repeater Repeater Network Components IE OSM - ESM XB X XC X XB X XR300 Modular X XM XR500 Modular S600 (Industrial Security Module) (LAN) C C Ethernet C ROFIBUS...89 Offer overview, 11/2016, A5E AB 5

6 Table of contents 13.3 C ILAN Network adapter Graphics cards Signal modules rinters Chip card reader C-based automation Controller CS7 BOX CS7 AS RTX CS artner modules S C t C AS-i FM S SM DI SM DO SM DI/DO SM DI-F SM DO-F SM AI SM AO SM AI-F SM MTA S C Ethernet C ROFIBUS FM CU prior to 04/99 (up to CS7 V4.02) CU as of 04/99 (CS7 V5.0 and later) H-CU as of 04/99 (CS7 V5.0 and later) CU as of 08/04 (CS7 V6.1 and later) H-CU as of 08/04 (CS7 V6.1 and later) Offer overview, 11/2016, A5E AB

7 Table of contents 17.9 CU as of 12/06 (CS7 V7.0 and later) H-CU as of 09/07 (CS7 V7.0.1 and later) CU as of 08/10 (CS7 V7.1.2 and later) H-CU as of 12/11 (CS7 V8.0 and later) CU as of 06/13 (as of CS 7 V8.0.2) CU as of 09/14 (as of CS 7 V8.1) CU as of 02/16 (as of CS 7 V8.2) IM S Racks SM DI SM DO SM AI SM AO SILUS modules A Appendix A.1 roperties Offer overview, 11/2016, A5E AB 7

8 Table of contents 8 Offer overview, 11/2016, A5E AB

9 Security information 1 Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks. In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement and continuously maintain a holistic, state-of-the-art industrial security concept. Siemens products and solutions only form one element of such a concept. Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines and components should only be connected to the enterprise network or the internet if and to the extent necessary and with appropriate security measures (e.g. use of firewalls and network segmentation) in place. Additionally, Siemens guidance on appropriate security measures should be taken into account. For more information about industrial security, please visit: Siemens products and solutions undergo continuous development to make them more secure. Siemens strongly recommends to apply product updates as soon as available and to always use the latest product versions. Use of product versions that are no longer supported, and failure to apply latest updates may increase customer s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under: Offer overview, 11/2016, A5E AB 9

10 Security information 10 Offer overview, 11/2016, A5E AB

11 ET 200M IM Approved combinations See the "SIMATIC Distributed I/O Device ET 200M" manual for the approved combinations of interface modules and bus modules and for the available functions. roduct name Article no. Firmware version Brief description roperties ET 200M- IM ET 200M- IM 153-1, extended environmental conditions ET 200M- IM ET 200M- IM 153-1, extended environmental conditions ET 200M- IM ET 200M- IM ET 200M- IM ET 200M- IM ET 200M- IM ES AA02-0XB0 6ES AA82-0XB0 6ES AA03-0XB0 6ES AA83-0XB0 6ES AA01-0XB0 6ES AA02-0XB0 6ES BA00-0XB0 V3.x 6ES BA01-0XB0 V4.x 6ES BA81-0XB0 V4.x Bus interface for S7-300 SMs, FM 350 to FM 352, FM 355, C 341, module replacement during operation Bus interface for S7-300 SMs, extended environmental conditions Bus interface for S7-300 SMs, FM 350 to FM 352, FM 355, C 341, module replacement during operation Bus interface for S7-300 SMs, extended environmental conditions Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation, extension of process control functions Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation, extension of process control functions Bus interface for S7-300 SMs, (outdoor), FMs (except FM 356-4), module replacement during operation, extension of process control functions X 08/ 00 X 10/ 05 X X 11/ 03 X 04/ 00 X 06/ 04 S X 07/ 06 S X 10/ 09 S X 12/ 10 Offer overview, 11/2016, A5E AB 11

12 ET 200M 2.2 Accessories roduct name Article no. Firmware version Brief description roperties ET 200M- IM ET 200M- IM ET 200M- IM FO ET 200M- IM FO ET 200M- IM N HF ET 200M- IM ET 200M- IM ES BA02-0XB0 V5.x 6ES BA82-0XB0 V5.x 6ES AB01-0XB0 6ES BB00-0XB0 V3.x 6ES BA00-0XB0 V4.x 6ES BA70-0XB0 6ES BA10-0XB0 Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation, extension of process control functions, up to 12 I/O modules can be operated Bus interface for S7-300 SMs, (outdoor), FMs (except FM 356-4), module replacement during operation, extension of process control functions, up to 12 I/O modules can be operated Bus interface for S7-300 SMs, with fiber optics, FMs (except FM 356-4), module replacement during operation Bus interface for S7-300 SMs, with fiber optics, FMs (except FM 356-4), module replacement during operation, extension of process control functions Bus interface for S7-300 SMs, with ROFINET connection; supports failsafe and HART module, N system redundancy Bus interface for S7-300 SMs (Outdoor); FMs (except FM 356-4), module replacement during operation, up to 12 I/O modules can be operated Bus interface for S7-300 SMs, FMs (except FM356-4), module replacement during operation, extension of process control functions, up to 12 I/O modules can be operated S X S X X 01/ 03 S X 10/ 06 S X S X 2.2 Accessories Approved combinations See the "SIMATIC Distributed I/O Device ET 200M" manual for the approved combinations of interface modules and bus modules and for the available functions. artition 6ES KA00-0XA0 Ex partition for ET 200M Bus module 6ES HA00-0XA0 Active bus module for ET 200M IM 153; S/IM 12 Offer overview, 11/2016, A5E AB

13 ET 200M 2.2 Accessories Bus module 6ES HB00-0XA0 Active bus module for ET 200M IM 153; 2x 40 mm Bus module 6ES HC00-0XA0 Active bus module for ET 200M IM 153; 1x 80 mm BM IM/IM 6ES HD00-0XA0 Active bus module for ET 200M IM 153; IM/IM for redundant IM operation BM IM/IM 6ES HD10-0XA0 Active bus module for ET 200M IM 153; IM/IM for redundant IM operation F separator bus module 6ES HG00-0XA0 F separator bus module for ET 200M F separator module 6ES KF00-0XA0 F separator module for ET 200M 07/ 04 Offer overview, 11/2016, A5E AB 13

14 ET 200M 2.2 Accessories 14 Offer overview, 11/2016, A5E AB

15 Gateway IE/B Link Approved combinations See SIMATIC Net; S7-Cs for Industrial Ethernet; Manual, art BL1 for the approved combinations of interface modules, couplers and bus modules as well as for the available functions. IE/B Link N IO 6GK AB00 IE/B link ROFINET IO proxy including real-time; gateway between Industrial Ethernet and rofibus; S7 routing; data record gateway; S7 slaves; DV1 slaves; 10/100 Mbps Fast Ethernet; 9.6 Kbps to 12 Mbps ROFIBUS 3.2 D link Approved combinations See SIMATIC Bus links D/A coupler, active field distributor, D/A Link and Link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. roduct name Article no. Firmware version Brief description IM 157 6ES AA80-0XA0 Interface module for ROFIBUS A; extended temperature range C IM 157 6ES AA81-0XA0 Interface module for ROFIBUS A; extended temperature range C IM 157 6ES AA82-0XA0 V4.x Interface module for A Link, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions roperties X 06/ 00 X 12/ 03 S 06/ 06 Offer overview, 11/2016, A5E AB 15

16 Gateway 3.2 D link roduct name Article no. Firmware version Brief description roperties IM HF IM Outdoor IM HF IM HF Outdoor 6ES BA01-0XB0 V4.x 6ES BA81-0XB0 V4.x 6ES BA02-0XB0 V5.x 6ES BA82-0XB0 V5.x A Link, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions A Link, outdoor, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions A Link, D V1to D and A; module replacement during operation, information function, F update via bus, extension of process control functions A Link, outdoor, D V1to D and A; module replacement during operation, information function, F update via bus, extension of process control functions IM HF Outdoor 6ES BA70-0XB0 A Link, D V1to D and A; module replacement during operation, information function, F update via bus, extension of process control functions, D/A Link with extended field bus diagnostics IM HF 6ES BA10-0XB0 A Link, D V1to D and A; module replacement during operation, information function, F update via bus, extension of process control functions S 10/ 09 S 10/ 07 S S S S 16 Offer overview, 11/2016, A5E AB

17 Gateway 3.4 Compact FF Link 3.3 FF Link Approved combinations See SIMATIC Bus links FF Link bus link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. roduct name Article no. Firmware version Brief description IM FF Outdoor 6ES DA80-0XB0 Interface module for SIMATIC FF Link, capable of redundant operation; FOUNDATION Fieldbus Link Master, extended temperature range FDC 157 6ES AC84-0XA0 Interface module for SIMATIC FF Link; physical interface for FOUNDATION Fieldbus H1, capable of redundant operation, with integrated bus supply up to 1 A; integrated diagnostics FDC 157 6ES AC85-0XA0 D/FF coupler; Interface module for SIMATIC FF Link; physical interface for FOUNDATION Fieldbus H1, capable of redundant operation, with integrated bus supply up to 1 A; integrated diagnostics roperties S S 3.4 Compact FF Link Approved combinations ou can find additional information in the SIMATIC Bus links; Compact FF Link bus link documentation. roduct name Article no. Firmware version Brief description Compact FF Link 6ES BA00-0AB0 Interface for FOUNDATION Fieldbus; FOUNDA TION Fieldbus Link Master; for redundant operation; integrated diagnostics extended temperature range; with integrated bus supply up to 0.5 A roperties Offer overview, 11/2016, A5E AB 17

18 Gateway 3.6 A coupler 3.5 Link Approved combinations See SIMATIC Bus links D/A coupler, active field distributor, D/A Link and Link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. coupler 6ES K00-0AB0 coupler; star connection for connection of singlechannel I/O to H system; single interface module coupler 6ES LB00-0XA0 coupler; star connection for connection of single-channel I/O to H system; single interface module with integrated RS 485 repeater 10/ A coupler Approved combinations See SIMATIC Bus links D/A coupler, active field distributor, D/A-Link and -Link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. D/A coupler 6ES AC00-0XA0 D/A coupler 04/ 00 D/A coupler 6ES AC80-0XA0 D/A coupler, non-ex; (outdoor); 400 ma D/A coupler 6ES AC81-0XA0 D/A coupler, non-ex; (outdoor); 400 ma D/A coupler 6ES AC82-0XA0 D/A coupler, non-ex; (outdoor); 1000 ma, 31 V D/A coupler 6ES AC83-0XA0 D/A coupler, non-ex; (outdoor); for redundant operation D/A coupler 6ES AC85-0XA0 D/A coupler, non-ex; (outdoor); for redundant operation; extended field bus diagnostics D/A coupler 6ES AD00-0XA0 D/A coupler, ex(i) 07/ 01 D/A coupler 6ES AD80-0XA0 D/A coupler, ex(ib); extended environmental conditions A 05/ 04 04/ 05 07/ 07 12/ Offer overview, 11/2016, A5E AB

19 Gateway 3.7 Optical link module D/A coupler, ex 6ES AD81-0XA0 D/A coupler; extended environmental conditions (ia), FM certification D/A coupler, ex 6ES AD82-0XA0 D/A coupler; extended environmental conditions (ia), FM certification, dust type certification Active field distributor 6ES AG81-0XA0 Active field distributor AFD for ROFIBUS A; ring redundancy; 4 spur lines Active field distributor 6ES AG82-0XA0 Active field distributor AFD for ROFIBUS A; ring redundancy; 8 spur lines 05/ Optical link module Approved combinations See the "SIMATIC Bus links D/A Link and Link" manual for the approved combinations of interface modules, couplers and bus modules and for the available functions. roduct name Article no. Firmware version Brief description roperties ROFIBUS OLM 11 ROFIBUS OLM 12 ROFIBUS OLM G11 ROFIBUS OLM G12 6GK CA00 V4.x 6GK CA00 V4.x 6GK CB00 V4.x 6GK CB00 V4.x Optical Link Module; 1 RS fiber-optic interface (2 BFOC - OF/CF); signaling contact and measuring output, including 2 BFOC connectors Optical Link Module; 1 RS fiber-optic interface (4 BFOC - OF/CF); signaling contact and measuring output, including 4 BFOC connectors Optical Link Module; 1 RS fiber-optic interface (2 BFOC - multimode fiber-optic cable); signaling contact and measuring output Optical Link Module; 1 RS fiber-optic interface (2 BFOC - multimode fiber-optic cable); signaling contact and measuring output Offer overview, 11/2016, A5E AB 19

20 Gateway 3.8 Accessories roduct name Article no. Firmware version Brief description roperties ROFIBUS OLM G12-EEC ROFIBUS OLM G ROFIBUS OLM G ROFIBUS OLM G22 6GK CD00 V4.x 6GK CC00 V4.x 6GK CC00 V4.x 6GK CB00 V4.x Optical Link Module; 1 RS fiber-optic interface (4 BFOC - multimode fiber-optic cable); signaling contact and measuring output, extended temperature range C Optical Link Module; 1 RS fiber-optic interface (2 BFOC - single-mode fiber-optic cable) wavelength 1300 nm for long distances, signaling contact and measuring output Optical Link Module; 1 RS fiber-optic interface (4 BFOC - single-mode fiber-optic cable) wavelength 1300 nm for long distances, signaling contact and measuring output Optical Link Module; 2 RS fiber-optic interface (2 BFOC) signaling contact and measuring output 3.8 Accessories Approved combinations See the corresponding manuals for the approved combinations of interface modules and bus modules and for the available functions. BM S/IM SILUS extreme 6AG HA00-2XA0 BM S/IM 6ES HA00-0XA0 Bus module for IM 153 Bus module for IM High Feature / IM FF Active bus module for 1 load power supply and 1 module; for "hot swap in runtime" function, extended temperature range -25 to +70 C Active bus module for 1 power supply and 1 module BM IM/IM 6ES HD80-0XA0 Bus module for IM 157 / IM High Feature / IM FF Active bus module for 2 modules; for redundant and non-redundant configuration; "hot swap in runtime" function, extended temperature range -25 to +60 C 20 Offer overview, 11/2016, A5E AB

21 Gateway 3.8 Accessories BM IM/IM 6ES HD10-0XA0 Bus module for IM BM 6ES HE80-0XA0 Bus module for IM 157 Bus module for redundant IM mode; "hot swap in runtime" function Bus module for redundant configuration of the IM 157 and module hot swap in runtime; temperature range -25 to +60 C BM FDC 6ES HF80-0XA0 Bus module for 1 D/A coupler Ex(i) / FDC / 1 field device coupler Active bus module for "hot swap in runtime" function, extended temperature range -25 to +60 C BM FDC/FDC 6ES HG80-0XA0 Bus module for 2 D/A couplers / 2 field device couplers Active bus module for redundant configuration; for "hot swap in runtime" function, extended temperature range -25 to +60 C BM 6ES H00-0XA0 Bus module for coupler BM Compact FF Link 6ES7655-5EF00-0AA0 Bus module for Compact FF Link Active field distributor AFD Active field distributor AFS Active field distributor AFS Active field distributor AFD4 Active field distributor AFD8 Active field distributor AFDiS Active field distributor AFDiSD 6ES AF81-0XA0 6ES AF82-0XA0 6ES AG80-0XA0 6ES AG81-0XA0 6ES AG82-0XA0 6ES AG83-0XA0 6ES DX60-1BB0 Active bus module for 2 modules; for redundant and non-redundant configuration; "hot swap in runtime" function, extended temperature range C Active field distributor AFD for A or FF field devices; ring redundancy; 4 short-circuit proof spur line connections Active field distributor AFS for A or FF; coupler redundancy Active field distributor AFS for ROFIBUS A and FOUNDATION Fieldbus H1; coupler redundancy Active field distributor AFD4 for ROFIBUS A and FOUNDATION Fieldbus H1; ring redundancy; 4 short-circuit proof spur line connections Active field distributor AFD8 for ROFIBUS A and FOUNDATION Fieldbus H1; ring redundancy; 8 short-circuit proof spur line connections Active field distributor AFDiS for A or FF field devices; ring redundancy; 6 short-circuit proof and intrinsically safe spur line connections Active field distributor AFDiSD with diagnostics for A or FF field devices; ring redundancy; 6 short-circuit proof and intrinsically safe spur line connections 08/ 12 08/ 12 Offer overview, 11/2016, A5E AB 21

22 Gateway 3.8 Accessories 22 Offer overview, 11/2016, A5E AB

23 ET 200A SMART AI AI8 Diag 6ES AK60-0AA0 Analog input module 8 AI; 16 Bit 0/4...20mA; with diagnostics AI8 Diag 6ES AK60-1AA0 Analog input module 8 AI; 16 Bit 0/4...20mA; with diagnostics; version with protective coating AI16 Diag 6ES AK70-0AA0 Analog input module 16 AI; 16 Bit 0/4...20mA; with diagnostics AI16 Diag 6ES AK70-1AA0 Analog input module 16 AI; 16 Bit 0/4...20mA; with diagnostics; version with protective coating AI TC/RTD 6ES AR60-0AA0 Analog input module 8 AI TC, 4 AI RTD; 16 Bit; with diagnostics AI TC/RTD 6ES AR60-1AA0 Analog input module 8 AI TC, 4 AI RTD; 16 Bit; with diagnostics; version with protective coating SM SM SM SM SM SM O C O C O C O C O G O G 4.2 AO AO8 Diag 6ES BK60-0AA0 Analog output module 8 AO; with diagnostics AO8 Diag 6ES BK60-1AA0 Analog output module 8 AO; with diagnostics; version with protective coating SM SM O C O C Offer overview, 11/2016, A5E AB 23

24 ET 200A SMART 4.5 IM 4.3 DI DI32 6ES DK80-0AA0 Digital input module 32 DI; DC 24 V DI32 6ES DK80-1AA0 Digital input module 32 DI; DC 24 V; version with protective coating DI16 6ES DK70-0AA0 Digital input module 16 DI; DC 24 V; with diagnostics DI16 6ES DK70-1AA0 Digital input module 16 DI; DC 24 V; with diagnostics; version with protective coating SM SM SM SM O M O M O C O C 4.4 DO DO32 6ES EK80-0AA0 32 DO; DC 24 V / 0.5 A DO32 6ES EK80-1AA0 32 DO; DC 24 V / 0.5 A; version with protective coating DO16 6ES EK70-0AA0 16 DO; DC 24 V / 0.5 A; with diagnostics DO16 6ES EK70-1AA0 16 DO; DC 24 V / 0.5 A; with diagnostics; version with protective coating SM SM SM SM O M O M O C O C 4.5 IM roduct name Article no. Firmware version Brief description IM ES H00-0AA0 Interface module connection for ET 200A SMART IM ES H00-1AA0 Interface module connection for ET 200A SMART; version with protective coating roperties S X S X 24 Offer overview, 11/2016, A5E AB

25 ET 200A SMART 4.6 Accessories 4.6 Accessories Accessories Bus module S/IM 6ES A00-0AA0 Backplane bus module for power supply and IM Bus module S/IM 6ES A00-1AA0 Backplane bus module for power supply and IM version with protective coating Bus module IM/IM 6ES B00-0AA0 Backplane bus module for 2 x IM redundant Bus module IM/IM 6ES B00-1AA0 Backplane bus module for 2 x IM redundant version with protective coating Bus module 6ES C00-0AA0 Backplane bus module for 2 x SMART electronic module Bus module 6ES C00-1AA0 Backplane bus module for 2 x SMART electronic module Version with protective coating Offer overview, 11/2016, A5E AB 25

26 ET 200A SMART 4.6 Accessories 26 Offer overview, 11/2016, A5E AB

27 ET 200S AI 2 AI 2 IRE 6ES RB00-0AB0 Analog input module 2 AI I; 2-wire measuring transducer; ma / 12 bits + sign, ma / 12 bits 2 AI 4 IRE 6ES RB50-0AB0 Analog input module 2 AI I; 4-wire measuring transducer; ma / 12 bits, ma / 12 bits 2 AI TC 6ES SB00-0AB0 Analog input module 2 AI TC; 15 bits + sign; standard; thermocouples: E, N, J, K, L, S, R, B, T,U 2 AI RTD 6ES SB50-0AB0 Analog input module 2 AI RTD; 15 bits + sign; standard; R: 600 Ohm; RTD: t 100, Ni 100: 2 AI 2 IRE HART 6ES TB00-0AB0 Analog input module 2 AI; ma, with HART communication for connecting 2-wire measuring transducers 2 AI 4 IRE HART 6ES TB50-0AB0 Analog input module 2 AI; ma, with HART communication for connecting 4-wire measuring transducers 09/ 06 09/ 06 09/ 06 09/ 06 09/ 06 09/ AO 2 AO 0/4-20mA 6ES RB00-0AB0 Analog output module 2 AO; ma / 12 bits + sign; ma / 12 bits 2 AO HART 6ES TB00-0AB0 Analog output module 2 AO; ma; with HART communication 09/ 06 09/ 06 Offer overview, 11/2016, A5E AB 27

28 ET 200S 5.6 S 5.3 DI 4 DI NAMUR 6ES RD00-0AB0 Digital input module 4 DI NAMUR 09/ DO 2 DO 6ES SB00-0AB0 2 DO; DC 25 V / 25 ma 09/ IM ET 200iS-IM ES AA00-0AB0 Interface module for ET 200iS electronic modules for intrinsically safe ROFIBUS D X 09/ S S 6ES EA00-0AA0 ower supply for ET 200iS 09/ Offer overview, 11/2016, A5E AB

29 ET 200S 5.7 Terminal module 5.7 Terminal module TM-E30S-44iS 6ES CB00-0AA0 Terminal module for Ems; 4 rows; screw terminal TM-E30C-44iS 6ES CB10-0AA0 Terminal module for EMs; 4 rows; spring-loaded terminal TM-S-iS 6ES DA00-0AA0 Terminal module for S 09/ 06 TM-IM-iS 6ES DB00-0AA0 Terminal module for IM / 06 09/ 06 09/ 06 Offer overview, 11/2016, A5E AB 29

30 ET 200S 5.7 Terminal module 30 Offer overview, 11/2016, A5E AB

31 ET 200iS AI 4 AI I 2IRE HART 6ES TD00-0AB0 Analog input module 4 AI; ma; with HART communication for connecting 2-wire measuring transducers 4 AI I 4IRE HART 6ES TD50-0AB0 Analog input module 4 AI; ma; with HART communication for connecting 4-wire measuring transducers 4 AI TC 6ES SD00-0AB0 Analog input module 4 AI TC 4 AI RTD 6ES SD50-0AB0 Analog input module 4 AI RTD 4 AI RTD 6ES SD51-0AB0 Analog input module 4 AI RTD M M M M 05/ 08 M 6.2 AI-F 4 AI 2IRE HART 6ES FA00-0AB0 Analog input module 4 AI; 0/ ma; safety-related, ex i;with HART communication for connecting 2-wire measuring transducers M 6.3 AO 4 AO I HART 6ES TD00-0AB0 Analog output module 4 AO; ma; with HART communication M Offer overview, 11/2016, A5E AB 31

32 ET 200iS 6.6 DO 6.4 DI 8 DI NAMUR 6ES RF00-0AB0 Digital input module 8 DI NAMUR M 6.5 DI-F 8 DI NAMUR 6ES FN00-0AB0 Digital input module F-DI 8 NAMUR, safety-related, ex i M 6.6 DO 4 DO DC23,1V/20mA 6ES RD00-0AB0 4 DO; DC 23.1 V / 20 ma 4 DO DC23,1V/20mA Shutdown "H" 6ES RD01-0AB0 4 DO; DC 23.1 V / 20 ma; shutdown "H" 4 DO DC17,4V/27mA 6ES RD10-0AB0 4 DO; DC 17.4 V / 27 ma 4 DO DC17,4V/27mA Shutdown "H" 6ES RD11-0AB0 4 DO; DC 17.4 V / 27 ma; shutdown "H" 4 DO DC17,4V/40mA 6ES RD20-0AB0 4 DO; DC 17.4 V / 40 ma 4 DO DC17,4V/40mA Shutdown "H"" 4 DO DC17,4V/40mA Shutdown "H" 4 DO DC23,1V/20mA Shutdown "L" 4 DO DC17,4V/ 27mAShutdown "L" 6ES RD21-0AB0 6ES RD22-0AB0 6ES GD00-0AB0 6ES GD10-0AB0 4 DO; DC 17.4 V / 40 ma; shutdown "H" 4 DO; DC 17.4 V / 40 ma; shutdown "H" 4 DO; DC 23.1 V / 20 ma; shutdown "L" 4 DO; DC 17.4 V / 27 ma; shutdown "L" M 10/ 06 M M 10/ 06 M M 10/ 06 M 06/ 10 M M M 32 Offer overview, 11/2016, A5E AB

33 ET 200iS 6.8 IM 4 DO DC17,4V/40mA Shutdown "L" 4 DO DC17,4V/ 40mAShutdown "L" 4 DO DC25,5V/22mA Shutdown "L" 2 DO Relais UC60V/ 2A 6ES GD20-0AB0 6ES GD21-0AB0 6ES GD30-0AB0 6ES HB00-0AB0 4 DO; DC 17.4 V / 40 ma; shutdown "L" 4 DO; DC 17.4 V / 40 ma; shutdown "L" 4 DO; DC 25.5 V / 22 ma; shutdown "L" 2 DO relay; UC 60 V / 2 A M 06/ 10 M M M 6.7 DO-F 4 DO 6ES FD00-0AB0 4 DO; DC 17.4 V / 40 ma; -switching, safety-related, ex i M 6.8 IM roduct name Article no. Firmware version Brief description ET 200iS-IM ES AA00-0AB0 Interface module for ET 200iS electronic modules for intrinsically safe ROFIBUS D ET 200iS-IM ES AA00-0AB0 V2.0 Interface module for ET 200iS electronic modules for intrinsically safe ROFIBUS D can be used for redundant operation in the H system roperties S S Offer overview, 11/2016, A5E AB 33

34 ET 200iS 6.12 Couplers 6.9 S S DC 24V 6ES EA00-0AA0 ower supply for ET 200iS 07/ 06 S DC 24V 6ES EA01-0AA0 ower supply for ET 200iS S AC 120/230V 6ES EC00-0AA0 ower supply for ET 200iS 6.10 EM EM reserve module 6ES AA00-0AA0 Reserve module for free slots 6.11 atchdog atchdog module 6ES BB00-0AB0 Special module for station monitoring M 6.12 Couplers RS 485-IS coupler 6ES AC80-0XA0 Fieldbus coupler between ROFIBUS D and RS 485-IS; to control intrinsically safe ROFIBUS nodes; installation in Zone 2 possible; extended temperature range 34 Offer overview, 11/2016, A5E AB

35 ET 200iS 6.13 Terminal module 6.13 Terminal module TM-EM/EM 60 S 6ES CA00-0AA0 Terminal module for 2 EM; screw terminal TM-EM/EM 60 C 6ES CA10-0AA0 Terminal module for 2 EM; spring-loaded terminal TM-EM/EM 60 S 6ES CA20-0AA0 Terminal module for 2 EM; screw terminal TM-EM Relais C 6ES CB00-0AA0 Terminal module for EM relay; screw terminal TM-IM/EM 60 S 6ES AA00-0AA0 Terminal module for IM / EM; screw terminal TM-IM/EM 60 C 6ES AA10-0AA0 Terminal module for IM / EM; spring-loaded terminal TM-IM/EM 60 S 6ES AA20-0AA0 Terminal module for IM / EM; screw terminal TM-IM/IM 6ES AB00-0AA0 Terminal module for redundant IM TM-S-A 6ES DA00-0AA0 Terminal module for power supply 07/ 06 TM-S-B 6ES DB00-0AA0 Terminal module for redundant power supply TM-S-A 6ES DA10-0AA0 Terminal module for 24 V DC power supply TM-S-B 6ES DB10-0AA0 Terminal module for 24 V DC redundant power supply TM-S-A 6ES DA20-0AA0 Terminal module for 120/230 V AC power supply TM-S-B 6ES DB20-0AA0 Terminal module for 120/230 V AC redundant power supply 07/ 06 Offer overview, 11/2016, A5E AB 35

36 ET 200iS 6.13 Terminal module 36 Offer overview, 11/2016, A5E AB

37 ET 200S AI 2 AI U 6ES FB00-0AB0 Analog input module 2 AI; (+/-5 V, V, +/-10 V) / 13 bits; standard 2 AI U 6ES FB01-0AB0 Analog input module 2 AI; (+/-5 V, V, +/-10 V) / 13 bits; standard 2 AI I 2DMU 6ES GB00-0AB0 Analog input module 2 AI; 2-wire measuring transducer ( ma) / 13 bits; standard 2 AI I 2DMU 6ES GB01-0AB0 Analog input module 2 AI; 2-wire measuring transducer ( ma) / 13 bits; standard 2 AI I 4DMU 6ES GB10-0AB0 Analog input module 2 AI; 4-wire measuring transducer (+/-20 ma, ma) / 13 bits; standard 2 AI I 4DMU 6ES GB11-0AB0 Analog input module 2 AI; 4-wire measuring transducer (+/-20 ma, ma) / 13 bits; standard 2 AI I TC 6ES JB00-0AB0 Analog input module 2 AI TC; 15 bits; standard 2 AI I TC 6ES JB01-0AB0 Analog input module 2 AI TC; 15 bits; standard 2 AI I RTD 6ES JB50-0AB0 Analog input module 2 AI RTD; 15 bits; standard 2 AI I RTD 6ES JB51-0AB0 Analog input module 2 AI RTD; 15 bits; standard 2 AI U 6ES LB00-0AB0 Analog input module 2 AI; ( V, +/- 5 V, +/- 10 V) / 15 bits; high-resolution 2 AI U 6ES LB02-0AB0 Analog input module 2 AI; ( V, +/- 5 V, +/- 10 V) / 15 bits; high-resolution 2 AI I 6ES MB00-0AB0 Analog input module 2 AI; (+/-20 ma, ma) / 15 bits, high-resolution 2 AI I 6ES MB02-0AB0 Analog input module 2 AI; (+/-20 ma, ma) / 15 bits, high-resolution 2 AI I TC High Feature 6ES NB00-0AB0 Analog input module 2 AI TC; 15 bits; high feature 07/ 05 04/ 05 05/ 05 09/ 08 09/ 08 06/ 06 06/ 06 09/ 05 Offer overview, 11/2016, A5E AB 37

38 ET 200S 7.2 AO 2 AI I TC High Feature 2 AI I RTD High Feature 2 AI I RTD High Feature 6ES NB01-0AB0 6ES NB50-0AB0 6ES NB51-0AB0 Analog input module 2 AI TC; 15 bits; high feature Analog input module 2 AI RTD; 15 bits; high feature Analog input module 2 AI RTD; 15 bits; high feature 11/ AO 2 AO U 6ES FB00-0AB0 Analog output module 2 AO; V / 12 Bit, +/-10 V / 13 bits; standard 2 AO U 6ES FB01-0AB0 Analog output module 2 AO; V / 12 Bit, +/-10 V / 13 bits; standard 2 AO I 6ES GB00-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 13 bits; standard 2 AO I 6ES GB01-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 13 bits; standard 2 AO U 6ES LB00-0AB0 Analog output module 2 AO; ( V, +/-10 V) / 15 bits; high-resolution 2 AO U 6ES LB01-0AB0 Analog output module 2 AO; ( V, +/-10 V) / 15 bits; high-resolution, supports isochronous mode 2 AO U 6ES LB02-0AB0 Analog output module 2 AO; ( V, +/-10 V) / 15 bits; high-resolution, supports isochronous mode 2 AO I 6ES MB00-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 15 bits; high-resolution 2 AO I 6ES MB01-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 15 bits, high-resolution, supports isochronous mode 2 AO I 6ES MB02-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 15 bits; high-resolution, supports isochronous mode 05/ 05 05/ 05 08/ 03 06/ 06 08/ 03 06/ Offer overview, 11/2016, A5E AB

39 ET 200S 7.3 DI 7.3 DI 2 DI DC24V 6ES BB00-0AA0 Digital input module 2 DI; 24 V DC; standard 2 DI DC24V 6ES BB01-0AA0 Digital input module 2 DI; 24 V DC; standard 4 DI DC24V 6ES BD00-0AA0 Digital input module 4 DI; 24 V DC; standard 4 DI DC24V 6ES BD01-0AA0 Digital input module 4 DI; 24 V DC; standard 2 DI DC24V High Feature 2 DI DC24V High Feature 4 DI DC24V High Feature 4 DI DC24V High Feature 8 DI DC24V High Speed 6ES BB00-0AB0 6ES BB01-0AB0 6ES BD00-0AB0 6ES BD01-0AB0 6ES BF00-0AA0 Digital input module 2 DI; 24 V DC; High Feature; with diagnostics Digital input module 2 DI; 24 V DC; High Feature; with diagnostics Digital input module 4 DI; 24 V DC; High Feature; with diagnostics Digital input module 4 DI; 24 V DC; High Feature; with diagnostics Digital input module 8 DI; DC 24 V;supports isochronous mode 4 DI 6ES CD00-0AB0 Digital input module 4 DI; UC V; High Feature; with diagnostics 4 DI UC V HF 6ES CD02-0AB0 Digital input module 4 DI; UC V; High Feature; with diagnostics 2 DI AC 120V 6ES EB00-0AB0 Digital input module 2 DI; 120 V AC 2 DI AC 230V 6ES FB00-0AB0 Digital input module 2 DI; 120 V AC 4 DI NAMUR 6ES RD00-0AB0 Digital input module 4 DI NAMUR; with diagnostics 4 DI NAMUR 6ES RD02-0AB0 Digital input module 4 DI NAMUR; with diagnostics 8 DI DC 24V 6ES FA00-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 04/ 05 04/ 05 06/ 05 05/ 05 08/ 10 10/ 10 06/ 04 Offer overview, 11/2016, A5E AB 39

40 ET 200S 7.4 DO 8 DI DC 24V 6ES FA01-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DIsafety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA02-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA03-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA04-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA05-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 10/ 05 01/ 07 10/ DO 2 DO DC24V/0.5A 2 DO DC24V/0.5A 2 DO DC24V/2A 2 DO DC24V/2A 2 DO DC24V/0.5A High Feature 2 DO DC24V/0.5A High Feature 6ES BB00-0AA0 6ES BB01-0AA0 6ES BB30-0AA0 6ES BB31-0AA0 6ES BB00-0AB0 6ES BB01-0AB0 2 DO; 24 V DC / 0.5 A; standard 2 DO; 24 V DC / 0.5 A; standard 2 DO; 24 V DC / 2 A; standard 2 DO; 24 V DC / 2 A; standard 2 DO; 24 V DC / 0.5 A; High Feature; with diagnostics 2 DO; 24 V DC / 0.5 A; High Feature; with diagnostics 04/ 05 04/ 05 09/ Offer overview, 11/2016, A5E AB

41 ET 200S 7.4 DO 2 DO DC24V/2A High Feature 2 DO DC24V/2A High Feature 4 DO DC24V/0.5A 4 DO DC24V/0.5A High Feature 4 DO DC24V/0.5A 4 DO DC24V/0.5A 4 DO DC24V/2A 4 DO DC24V/2A High Feature 4 DO DC24V/2A 4 DO DC24V/2A 8 DO DC24V/0.5A High Speed 8 DO DC24V/0.5A High Feature 2 DO AC 120/230V/ 1A 2 DO AC 120/230V/ 1A 2 DO Rel V/5A 2 DO Rel V/5A 2 DO Rel V/5A 2 DO Rel V/5A 4 DO DC 24V/2A 6ES BB30-0AB0 6ES BB31-0AB0 6ES BD00-0AA0 6ES BD00-0AB0 6ES BD01-0AA0 6ES BD02-0AA0 6ES BD30-0AA0 6ES BD30-0AB0 6ES BD31-0AA0 6ES BD32-0AA0 6ES BF00-0AA0 6ES BF00-0AB0 6ES FB00-0AB0 6ES FB01-0AB0 6ES HB00-0AB0 6ES HB01-0AB0 6ES HB10-0AB0 6ES HB12-0AB0 6ES FB00-0AB0 2 DO; 24 V DC / 2 A; High Feature; with diagnostics 2 DO; 24 V DC / 2 A; High Feature; with diagnostics 4 DO; 24 V DC / 0.5 A; standard 4 DO; 24 V DC / 0.5 A; High Feature; with diagnostics 4 DO; 24 V DC / 0.5 A; standard 4 DO; 24 V DC / 0.5 A; standard 4 DO; 24 V DC / 2 A; standard 4 DO; 24 V DC / 2 A; High Feature, with diagnostics 4 DO; 24 V DC / 2 A; standard 4 DO; 24 V DC / 2 A; standard 8 DO; 24 V DC/ 0.5 A; supports isochronous mode 8 DO; 24 V DC/ 0.5 A; High Feature, with diagnostics, supports isochronous mode 2 DO; 120 / 230 V, 1 A AC 2 DO; 120 / 230 V, 1 A AC 2 relays; V / 5 A UC 2 relays; V / 5 A UC 2 relays; form C; V / 5 A UC 2 relays; form C; V / 5 A UC 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 07/ 05 05/ 05 10/ 10 04/ 05 05/ 07 01/ 07 04/ 05 05/ 11 06/ 04 Offer overview, 11/2016, A5E AB 41

42 ET 200S 7.6 IM 4 DO DC 24V/2A 4 DO DC 24V/2A 4 DO DC 24V/2A 4 DO DC 24V/2A 6ES FB01-0AB0 6ES FB02-0AB0 6ES FB03-0AB0 6ES FB04-0AB0 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 4 DO; 24 V / 2 A; DC safety related to SIL-3, with diagnostics, M switching 10/ 05 10/ FM Counter module, 24 V/100 khz 6ES DA04-0AB0 Counter module, 24 V / 100 khz; for single, continuous and periodic counting, supports isochronous mode (only counting and measuring modes have been released for CS 7) 7.6 IM IM ES BA00-0AB0 Interface module IM for ET 200S; high feature IM ES BA01-0AB0 Interface module IM for ET 200S; high feature IM ES BA02-0AB0 Interface module IM for ET 200S; high feature X 10/ 05 X 03/ 07 X 42 Offer overview, 11/2016, A5E AB

43 ET 200S 7.7 S 7.7 S M-E DC24V 6ES CA00-0AA0 ower supply, DC 24 V; with diagnostics M-E DC24V 6ES CA01-0AA0 ower supply, DC 24 V; with diagnostics M-E DC24V HF 6ES CA60-0AB0 ower supply, DC 24 V; with diagnostics, high feature M-E DC24V/ AC120/230V M-E DC24V..48/ AC V 6ES CB10-0AB0 6ES CB11-0AB0 ower supply, DC 24 V; AC 120 V or 230 V; with diagnostics and fuse ower supply, DC V, AC V; with diagnostics and fuse M-E DC24V 6ES CF00-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF01-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF02-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF03-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF42-0AB0 ower supply, DC 24 V; safety-related, -switching; with diagnostics M-D DC24V 3RK BA00 ower supply, DC 24 V; 2 M-D; DC 24 V M-D F1 SIGUARD 3RK BA00 ower supply; EMERGENC OFF; monitored start-up; 2-channel M-D F2 SIGUARD 3RK BB00 ower supply; protective door; autostart; 2-channel M-D F4 SIGUARD 3RK BC00 ower supply; extension to F1/2 for additional potential group 04/ 05 11/ 06 06/ 04 10/ 05 10/ 08 Offer overview, 11/2016, A5E AB 43

44 ET 200S 7.8 Terminal module M-D F3 SIGUARD 3RK BD00 ower supply; extension to F1/2 for additional potential group; time-delayed M-D F5 SIGUARD 3RK BE00 ower supply; extension to M-D F1 to M-D F4; contact multiplier M-X SIGUARD 3RK CB00 Connection module for incoming feeder protection; external safety circuits M-D F ROFIsafe 3RK BA00 ower supply for 6 vector groups; safety-related M-D F ROFIsafe 3RK BA01 ower supply for 6 vector groups; safety-related M-D F ROFIsafe 3RK BA02 ower supply for 6 vector groups; safety-related F-CM 3RK CA00 Contact multiplier; extension to M-D F ROFIsafe; M-D F X1 3RK DA00 ower supply/expansion module; overvoltage protection; for supplying external EMERGENC OFF signals; for 6 vector groups 10/ Terminal module TM-E15x26-A1 6ES CAx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-E15x24-A1 6ES CAx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-E15x ES CBx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-E15x ES CBx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals 44 Offer overview, 11/2016, A5E AB

45 ET 200S 7.8 Terminal module TM-E15x24-AT 6ES CLx0-0AA0 Terminal module for electronic modules 2 AI TC HF; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-E30x46-A1 6ES CFx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-E30x ES CGx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-15x23-A1 6ES CCx0-0AA0 Terminal module for power supply; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-15x23-A0 6ES CDx0-0AA0 Terminal module for power supply; interrupted AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-15x ES CEx0-0AA0 Terminal module for power supply; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-30x44-A0 6ES CKx0-0AA0 Terminal module for fail-safe power supply M-E F; interrupted AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-15S RK AA00 Terminal module for power supply M-D; with end cover TM-F30S47-B1 3RK AA00 Terminal module SIGUARD M-D F 1,2; for potential group, supply U1, U2, sensor connection TM-F30S47-B0 3RK AA10 Terminal module for SIGUARD M-D F 1,2 for potential subgroup, sensor connection TM-F30S47-C1 3RK AC00 Terminal module SIGUARD M-D F 3,4 for potential group, supply U1, U2 TM-F30S47-C0 3RK AC10 Terminal module SIGUARD M-D F 3,4 for potential subgroup, supply U2 Offer overview, 11/2016, A5E AB 45

46 ET 200S 7.9 Motor starter TM-F30S47-D0 3RK AD10 Terminal module SIGUARD M-D F 5 for contact multipliers TM-X15 S RK AB00 Terminal module for connection module M- X connection unit for supply contactor TM-F30S47-F1 3RK AA00 Terminal module for fail-safe power supply M-D F; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-FCM30S47-E0 3RK AB10 Terminal module for F-CM; with bushing for U1 TM-FX30S47-G1 3RK AE00 Terminal module for M-D F X1; for potential group; no supply from left for U1 TM-FX30S47-G0 3RK AE10 Terminal module for M-D F X1; for potential group; with supply from left for U1 7.9 Motor starter DS1e-x 0,3-3 A High Feature DS1e-x 0,3-3 A High Feature 3RK AB10-0AA2 3RK AB10-0AA3 Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; high feature Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature 05/ Offer overview, 11/2016, A5E AB

47 ET 200S 7.9 Motor starter DS1e-x 0,3-3 A High Feature DS1e-x 2,4-8 A High Feature DS1e-x 2,4-8 A High Feature DS1e-x 2,4-8 A High Feature DS1e-x 2,4-16 A High Feature DS1e-x 2,4-16 A High Feature 3RK AB10-0AA4 3RK BB10-0AA2 3RK BB10-0AA3 3RK BB10-0AA4 3RK CB10-0AA2 3RK CB10-0AA3 Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2,4 A to 8A; Option: Brake control module, control module; high feature Direct starter; DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2,4 A to 8 A; Option: Brake control module, control module; switch ES; high feature Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2,4 A to 8 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Direct starter DS1e-x A; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2,4 A to 16 A; Option: Brake control module, control module; high feature Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2,4 A to 16 A; Option: Brake control module, control module; switch ES; high feature 05/ 04 05/ 04 Offer overview, 11/2016, A5E AB 47

48 ET 200S 7.9 Motor starter DS1e-x 2,4-16 A High Feature DSS1e-x 0,3-3 A High Feature DSS1e-x 0,3-3 A High Feature DSS1e-x 0,3-3 A High Feature DSS1e-x 2,4-8 A High Feature DSS1e-x 2,4-8 A High Feature 3RK CB10-0AA4 3RK AB20-0AA2 3RK AB20-0AA3 3RK AB20-0AA4 3RK BB20-0AA2 3RK BB20-0AA3 Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2,4 A to 16 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Direct soft starter DSS 1e-x A; electronic switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0,30 A to 3,00 A; Option: Brake control module, control module; high feature Direct starter DSS 1e-x; A; electronic switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature Direct starter DSS 1e-x; A; electronic switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature Direct soft starter DSS 1 e-x; A; electronic switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; high feature Direct soft starter DSS 1e-x; 2,4-8 A; electronic switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; switch ES; high feature 05/ 04 05/ Offer overview, 11/2016, A5E AB

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6. ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S7-300 13

More information

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) Security information 1 ET 200M 2. Gateway 3 ET 200S 4. ET 200iSP 5 ET 200S 6

SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) Security information 1 ET 200M 2. Gateway 3 ET 200S 4. ET 200iSP 5 ET 200S 6 Security information 1 ET 200M 2 SIMATIC rocess Control System CS 7 Offer overview Gateway 3 ET 200S 4 ET 200iS 5 ET 200S 6 ET 200X 7 ET 200pro 8 Repeater 9 Network Components 10 C 11 C-based automation

More information

SIMATIC. Process Control System PCS 7 Released modules (V8.0) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.

SIMATIC. Process Control System PCS 7 Released modules (V8.0) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6. ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S7-300 13

More information

Use with 0 to 70 C ambient. temperature SIMATIC. Process Control System PCS 7 Use with 0 to 70 C ambient temperature. Preface 1. Product combination 2

Use with 0 to 70 C ambient. temperature SIMATIC. Process Control System PCS 7 Use with 0 to 70 C ambient temperature. Preface 1. Product combination 2 Use with 0 to 70 C ambient temperature SIMATIC Preface 1 Product combination 2 Product family 3 Process Control System PCS 7 Use with 0 to 70 C ambient temperature System Manual 02/2015 A5E35458345-AA

More information

ET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)

ET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0) 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32- SIMATIC Preface 1 Properties 2 Diagnostics 3 ET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32- Manual 10/2015

More information

Industrial Controls. Motor management and control devices SIMOCODE pro - Application examples. Introduction 1. Application example

Industrial Controls. Motor management and control devices SIMOCODE pro - Application examples. Introduction 1. Application example Introduction 1 Application example 2 Industrial Controls Motor management and control devices SIMOCODE pro - Application examples Application Manual Example circuits control functions 3 Further application

More information

BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC. ET 200SP BaseUnits. Preface. Guide to the documentation 1. Product overview 2

BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC. ET 200SP BaseUnits. Preface. Guide to the documentation 1. Product overview 2 BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Manual Preface Guide to the documentation 1 Product overview 2 BaseUnits for I/O modules 3 BaseUnits

More information

Product Information Mixed. Configuration ET 200SP / ET 200AL SIMATIC. ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL.

Product Information Mixed. Configuration ET 200SP / ET 200AL SIMATIC. ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL. Product Information Mixed Configuration ET 200SP / ET 200AL SIMATIC ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL Product Information Preface Application planning 1 Mounting 2 Connection

More information

Power module PM-E DC24V HF SIMATIC. ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface. Properties.

Power module PM-E DC24V HF SIMATIC. ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface. Properties. Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) SIMATIC ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual 06/2010

More information

Power module PM-E DC24V/8A RO SIMATIC. ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface. Properties.

Power module PM-E DC24V/8A RO SIMATIC. ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface. Properties. Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) SIMATIC ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual

More information

SIMATIC. Digital Input Module SM DI, DC24V - Sinking/Sourcing. Product information. Product Information

SIMATIC. Digital Input Module SM DI, DC24V - Sinking/Sourcing. Product information. Product Information SIMATIC Digital Input Module Product information 1 SIMATIC Digital Input Module Product Information This documentation is part of the documentation package with the order number: S7-300 Automation System:

More information

PROFIenergy product information SIMATIC. ET 200SP PROFIenergy product information. PROFIenergy 1. Product Information 12/2015 A5E AH

PROFIenergy product information SIMATIC. ET 200SP PROFIenergy product information. PROFIenergy 1. Product Information 12/2015 A5E AH PROFIenergy 1 SIMATIC ET 200SP Product Information 12/2015 A5E03871936-AH Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,

More information

ET 200S distributed I/O Digital electronic module 2DO AC V (6ES7132-4FB01-0AB0)

ET 200S distributed I/O Digital electronic module 2DO AC V (6ES7132-4FB01-0AB0) SIMATIC ET 200S distributed I/O SIMATIC Preface ET 200S distributed I/O Digital electronic module 2DO AC24..230V (6ES7132-4FB01-0AB0) Properties 1 Parameters 2 Diagnostics 3 Manual 04/2007 A5E01077264-01

More information

https://support.industry.siemens.com/cs/ww/en/view/

https://support.industry.siemens.com/cs/ww/en/view/ Support Packages for TIA Portal V14 February 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The

More information

IO-Link Master (6ES7147-4JD00-0AB0) SIMATIC. ET 200pro IO-Link Master (6ES7147-4JD00-0AB0) Preface. Documentation guide. Product overview.

IO-Link Master (6ES7147-4JD00-0AB0) SIMATIC. ET 200pro IO-Link Master (6ES7147-4JD00-0AB0) Preface. Documentation guide. Product overview. IO-Link Master (6ES7147-4JD00-0AB0) SIMATIC ET 200pro IO-Link Master (6ES7147-4JD00-0AB0) Manual Preface Documentation guide 1 Product overview 2 Wiring 3 Parameters/address space 4 Diagnostics alarms

More information

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01-0AA0) Preface. Properties 1. Diagnostics 2.

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01-0AA0) Preface. Properties 1. Diagnostics 2. SIMATIC ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01- SIMATIC Preface Properties 1 Diagnostics 2 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A

More information

ST (6ES7132-6FD00-0BB1)

ST (6ES7132-6FD00-0BB1) SIMATIC ET 200SP Digital output module DQ 4x24..230VAC/2A ST (6ES7132-6FD00-0BB1) Manual Edition 02/2014 Answers for industry. DQ 4x24..230VAC/2A ST Preface Guide to documentation 1 SIMATIC ET 200SP DQ

More information

DANGER indicates that death or severe personal injury will result if proper precautions are not taken.

DANGER indicates that death or severe personal injury will result if proper precautions are not taken. SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Digital electronic module 4DI DC24V HF (6ES7131-4BD01-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 04/2007 A5E01077141-01

More information

SIMATIC. Process Control System PCS 7 Configuration McAfee Endpoint Security Security information 1. Preface 2.

SIMATIC. Process Control System PCS 7 Configuration McAfee Endpoint Security Security information 1. Preface 2. Security information 1 Preface 2 SIMATIC Configuration 3 Process Control System PCS 7 Configuration McAfee Endpoint Security 10.5 Installation Manual 03/2018 A5E44395618-AA Legal information Warning notice

More information

Block Library Motor Starter SIRIUS for SIMATIC PCS 7

Block Library Motor Starter SIRIUS for SIMATIC PCS 7 Industrial Controls Block Library Motor Starter SIRIUS for SIMATIC PCS 7 SIRIUS Motor Starter PCS 7 Library V7.1+SP2 / SIRIUS Motor Starter PCS 7 Library V8 Migration 8.0+SP1 Getting Started Edition 08/2013

More information

SIMATIC. Process Control System PCS 7 VT Readme V8.2 (online) Security information 1. Overview 2. Notes on Installation 3. Notes on usage 4.

SIMATIC. Process Control System PCS 7 VT Readme V8.2 (online) Security information 1. Overview 2. Notes on Installation 3. Notes on usage 4. Security information 1 Overview 2 SIMATIC Process Control System PCS 7 Notes on Installation 3 Notes on usage 4 Readme 04/2016 A5E36515375-AA Legal information Warning notice system This manual contains

More information

S7-400 CPU ES XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI;

S7-400 CPU ES XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI; S7-400 CPU 412-1 6ES7 412-1XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; 0.075 ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI; send and receive capability for direct data exchange;

More information

DI 8x24VDC ST digital input module SIMATIC. ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Preface. Documentation guide

DI 8x24VDC ST digital input module SIMATIC. ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Preface. Documentation guide DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) SIMATIC ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Manual Preface Documentation guide 1 Product overview 2 Connecting 3 Parameter

More information

Industrial Controls. SIMOCODE pro SIMOCODE pro PCS 7 Library. Preface. Security information. Product specific security. information.

Industrial Controls. SIMOCODE pro SIMOCODE pro PCS 7 Library. Preface. Security information. Product specific security. information. Industrial Controls SIMOCODE pro Preface 1 Product specific security Security information 2 information 3 Introduction 4 5 References 6 List of Abbreviations 7 10/2018 A5E36558134002A/RS-AB/002 Legal information

More information

DANGER indicates that death or severe personal injury will result if proper precautions are not taken.

DANGER indicates that death or severe personal injury will result if proper precautions are not taken. Preface SIMATIC ET 200S distributed I/O Digital electronic module 2RO NO/NC DC24..48V/5A AC24..230V/5A (6ES7132-4HB50-0AB0) SIMATIC ET 200S distributed I/O Digital electronic module 2RO NO/NC DC24..48V/5A

More information

Short Description. Version

Short Description. Version S7-400 S7-400 CP 443-1 6GK7 443-1EX11-0XE0 V2.6 S7 CP for Industrial Ethernet ISO and TCP/IP with SEND/RECEIVE and FETCH/WRITE interface, long data, UDP, TCP, ISO, S7 communication, routing, module replacement

More information

Readme SiVArc V14 SP1 Update 6

Readme SiVArc V14 SP1 Update 6 Product version 1 Improvements in Update 6 2 Readme 05/2018 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as

More information

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02-0AA0) Preface. Properties 2. Diagnostics 3.

SIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02-0AA0) Preface. Properties 2. Diagnostics 3. Preface 1 Properties 2 SIMATIC Diagnostics 3 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02- Manual 01/2008 A5E01254028-01 Safety Guidelines This manual contains notices

More information

https://support.industry.siemens.com/cs/ww/en/view/

https://support.industry.siemens.com/cs/ww/en/view/ Support Packages for TIA Portal V13 March 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The general

More information

SIMATIC S plus TIA Portal

SIMATIC S plus TIA Portal Product range overview SIMATIC S7-1500 plus TIA Portal Power + Efficiency The ultimate plus in automation Intuitive, efficient, proven TIA Portal redefines engineering Answers for industry. Your plus of

More information

SIMATIC. Process Control System PCS 7 CFC Readme V9.0 (online) Security information 1. Overview 2. Notes on Installation 3. Notes on usage 4.

SIMATIC. Process Control System PCS 7 CFC Readme V9.0 (online) Security information 1. Overview 2. Notes on Installation 3. Notes on usage 4. Security information 1 Overview 2 SIMATIC Process Control System PCS 7 Notes on Installation 3 Notes on usage 4 Readme V9.0 A5E39595586-AA Legal information Warning notice system This manual contains notices

More information

SIMATIC. Industrial PC Microsoft Windows 7 (USB stick) Safety instructions 1. Initial startup: Commissioning the operating system

SIMATIC. Industrial PC Microsoft Windows 7 (USB stick) Safety instructions 1. Initial startup: Commissioning the operating system Safety instructions 1 Initial startup: Commissioning the operating system 2 SIMATIC Industrial PC Operating Instructions Restoring the factory settings of the operating system and partitions(restore) 3

More information

SIMATIC. S7-1500/ET 200MP DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0) Preface. Documentation guide. Product overview.

SIMATIC. S7-1500/ET 200MP DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0) Preface. Documentation guide. Product overview. Preface Documentation guide 1 SIMATIC S7-1500/ET 200MP DI 16x230VAC BA Digital Input Module (6ES7521-1FH00-0AA0) Manual Product overview 2 Wiring 3 Address space 4 Diagnostic alarms 5 Technical specifications

More information

SIMATIC. PCS 7 Process Control System SIMATIC Logon Readme V1.6 (Online) Security information 1. Overview 2. Notes on installation 3.

SIMATIC. PCS 7 Process Control System SIMATIC Logon Readme V1.6 (Online) Security information 1. Overview 2. Notes on installation 3. Security information 1 Overview 2 SIMATIC PCS 7 Process Control System SIMATIC Logon Readme V1.6 (Online) Notes on installation 3 Notes on usage 4 Readme V1.6 02/2017 A5E40700191-AA Legal information Warning

More information

Team engineering via Inter Project. Engineering. TIA Portal. Team engineering via Inter Project Engineering. Basics of "Inter Project Engineering"

Team engineering via Inter Project. Engineering. TIA Portal. Team engineering via Inter Project Engineering. Basics of Inter Project Engineering Team engineering via Inter Project Engineering TIA Portal Basics of "Inter Project Engineering" 1 Creating an IPE file 2 Importing an IPE file 3 Team engineering via Inter Project Engineering Getting Started

More information

Siemens Industrial SIMATIC. Process Control System PCS 7 Configuration Trend Micro OfficeScan Server XG. Security information 1.

Siemens Industrial SIMATIC. Process Control System PCS 7 Configuration Trend Micro OfficeScan Server XG. Security information 1. Security information 1 Preface 2 SIMATIC Configuration 3 Process Control System PCS 7 Configuration Trend Micro OfficeScan Server XG Commissioning Manual Siemens Industrial 03/2018 A5E44395601-AA Legal

More information

SIMATIC. PCS 7 Licenses and configuration limits (V9.0) Security information 1. Preface 2. Selecting the correct license keys 3

SIMATIC. PCS 7 Licenses and configuration limits (V9.0) Security information 1. Preface 2. Selecting the correct license keys 3 Security information 1 Preface 2 SIMATIC PCS 7 Licenses and configuration limits (V9.0) Selecting the correct license keys 3 Licensing of PC stations 4 Data volumes 5 Installation Manual Valid for PCS

More information

SIMATIC. Industrial PC Microsoft Windows 7. Safety instructions 1. Initial startup: Commissioning the operating. system

SIMATIC. Industrial PC Microsoft Windows 7. Safety instructions 1. Initial startup: Commissioning the operating. system Safety instructions 1 Initial startup: Commissioning the operating 2 system SIMATIC Industrial PC Operating Instructions Restoring the factory settings of the operating system and 3 partitions (Restore)

More information

SIMATIC. Process Control System PCS 7 Configuration Symantec Endpoint Protection V14. Security information 1. Preface 2.

SIMATIC. Process Control System PCS 7 Configuration Symantec Endpoint Protection V14. Security information 1. Preface 2. Security information 1 Preface 2 SIMATIC Configuration 3 Process Control System PCS 7 Configuration Symantec Endpoint Protection V14 Commissioning Manual 03/2018 A5E44395521-AA Legal information Warning

More information

SIMATIC. PCS 7 process control system PCS 7 Basis Library Readme V9.0 (Online) Security information 1. Overview 2. Notes on installation 3

SIMATIC. PCS 7 process control system PCS 7 Basis Library Readme V9.0 (Online) Security information 1. Overview 2. Notes on installation 3 Security information 1 Overview 2 SIMATIC PCS 7 process control system PCS 7 Basis Library Readme V9.0 (Online) Readme Notes on installation 3 New features and changes as compared to previous versions

More information

Industrial Controls. Motor management and control devices SIMOCODE pro. Introduction 1. Configuring a reversing starter. List of abbreviations

Industrial Controls. Motor management and control devices SIMOCODE pro. Introduction 1. Configuring a reversing starter. List of abbreviations Introduction 1 Configuring a reversing starter 2 Industrial Controls A List of abbreviations Motor management and control devices Getting Started 05/2018 A5E40507294002A/RS-AB/002 Legal information Warning

More information

Device manual SINAMICS SINAMICS G120. Distributed inverter box Control cabinet for wall or floor mounting.

Device manual SINAMICS SINAMICS G120. Distributed inverter box Control cabinet for wall or floor mounting. Device manual SINAMICS SINAMICS G120 Control cabinet for wall or floor mounting Edition 06/2018 www.siemens.com/drives Safety note 1 Description 2 SINAMICS SINAMICS G120 Manual Mounting 3 Connection 4

More information

SIMATIC. Process Control System PCS 7 PCS 7 Basis Library Readme V8.2 Update 2 (online) Security information 1. Overview 2. Notes on installation 3

SIMATIC. Process Control System PCS 7 PCS 7 Basis Library Readme V8.2 Update 2 (online) Security information 1. Overview 2. Notes on installation 3 Security information 1 Overview 2 SIMATIC Process Control System PCS 7 PCS 7 Basis Library Readme V8.2 Update 2 (online) Readme Notes on installation 3 New features and changes as compared to previous

More information

SIMATIC. SIMATIC Energy Manager V1.0 App for ios and Android. Preface. SIMATIC Energy Manager app. Establish connection to SIMATIC Energy Manager PRO

SIMATIC. SIMATIC Energy Manager V1.0 App for ios and Android. Preface. SIMATIC Energy Manager app. Establish connection to SIMATIC Energy Manager PRO Preface SIMATIC Energy Manager app 1 SIMATIC SIMATIC Energy Manager V1.0 App for ios and Android Establish connection to SIMATIC Energy Manager 2 PRO Mobile data acquisition 3 Working with data points

More information

SIMATIC. Process Control System PCS 7 Advanced Process Functions Operator Manual. Preface. Security information 1. Overview 2. Material management 3

SIMATIC. Process Control System PCS 7 Advanced Process Functions Operator Manual. Preface. Security information 1. Overview 2. Material management 3 Preface Security information 1 SIMATIC Process Control System PCS 7 Advanced Process Functions Operator Manual Operating Manual Overview 2 Material management 3 Material lot management 4 Storage location

More information

Siemens Drives & PLCs

Siemens Drives & PLCs Security information 1 Overview 2 SIMATIC Process control system SIMATIC BATCH Readme V9.0 (Online) Part A, Requirements and General Instructions 3 Part B, Installation 4 Part C, Special Features and Notes

More information

SIMATIC. S7-1500/ET 200MP Digital input module DI 16x24VDC BA (6ES7521-1BH10-0AA0) Preface. Documentation guide. Product overview.

SIMATIC. S7-1500/ET 200MP Digital input module DI 16x24VDC BA (6ES7521-1BH10-0AA0) Preface. Documentation guide. Product overview. Preface Documentation guide 1 SIMATIC S7-1500/ET 200MP Digital input module DI 16x24VDC BA (6ES7521-1BH10-0AA0) Manual Product overview 2 Wiring 3 Address space 4 Diagnostics alarms 5 Technical specifications

More information

Product Information on the Manual

Product Information on the Manual Edition 12.2004 S7-300 Programmable Controller; Module Specifications, as of Edition 02/2004 (A5E00105505) ET 200M Distributed I/O Device Signal Modules for Process Automation, as of Edition 10/2004 (A5E00085262)

More information

Plant Automation Accelerator 2.1 Readme (Online)

Plant Automation Accelerator 2.1 Readme (Online) Security information 1 Overview 2 Operating system requirements 3 Software requirements 4 Plant Automation Accelerator 2.1 Readme (Online) Readme Setup contents 5 Installation on Citrix 6 Start parameter

More information

SIMATIC. Process Control System PCS 7 PCS 7 Basis Library Readme V8.2 Update 4 (Online) Security information 1. Overview 2. Notes on installation 3

SIMATIC. Process Control System PCS 7 PCS 7 Basis Library Readme V8.2 Update 4 (Online) Security information 1. Overview 2. Notes on installation 3 Security information 1 Overview 2 SIMATIC Process Control System PCS 7 PCS 7 Basis Library Readme V8.2 Update 4 (Online) Readme Notes on installation 3 New features and changes as compared to previous

More information

SIMATIC NET. Industrial Ethernet Security SCALANCE S615 Getting Started. Preface. Connecting SCALANCE S615 to the WAN 1

SIMATIC NET. Industrial Ethernet Security SCALANCE S615 Getting Started. Preface. Connecting SCALANCE S615 to the WAN 1 Preface Connecting SCALANCE S615 to the WAN 1 SIMATIC NET VPN tunnel between SCALANCE S615 and 2 SINEMA RC Server Industrial Ethernet Security Getting Started 07/2017 C79000-G8976-C390-02 Legal information

More information

SIMOCODE pro. Read me SIMOCODE ES. Introduction 1. Installation notes 2. Installation/License key/ Uninstallation 3.

SIMOCODE pro. Read me SIMOCODE ES. Introduction 1. Installation notes 2. Installation/License key/ Uninstallation 3. Introduction 1 Installation notes 2 SIMOCODE pro Installation/License key/ Uninstallation 3 Tips for use 4 Technical assistance 5 Readme Legal information Warning notice system This manual contains notices

More information

Digital output module. DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0) SIMATIC

Digital output module. DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0) SIMATIC Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0) SIMATIC S7-1500/ET 200MP Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0) Manual Preface Documentation guide 1 Product overview

More information

SIMATIC. ET 200S distributed I/O Power module PM-E DC24..48V/AC V (6ES7138-4CB11-0AB0) Preface. Properties 1. Parameters 2.

SIMATIC. ET 200S distributed I/O Power module PM-E DC24..48V/AC V (6ES7138-4CB11-0AB0) Preface. Properties 1. Parameters 2. SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Power module PM-E DC24..48V/AC24..230V (6ES7138-4CB11-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 04/2007

More information

SIMATIC. Industrial PC Microsoft Windows Embedded Standard 7. Safety instructions 1. Initial startup: Commissioning the operating.

SIMATIC. Industrial PC Microsoft Windows Embedded Standard 7. Safety instructions 1. Initial startup: Commissioning the operating. Safety instructions 1 Initial startup: Commissioning the operating 2 system SIMATIC Industrial PC Microsoft Windows Embedded Standard 7 Restoring the factory settings of the operating system and 3 partitions

More information

SIMATIC. ET 200SP DQ 4x VAC/2A ST digital output module (6ES7132-6FD00-0BB1) Preface. Guide to documentation. Product overview.

SIMATIC. ET 200SP DQ 4x VAC/2A ST digital output module (6ES7132-6FD00-0BB1) Preface. Guide to documentation. Product overview. Preface Guide to documentation 1 SIMATIC ET 200SP DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1) Manual Product overview 2 Wiring 3 Parameter assignment/addressing 4 Interrupts/diagnostics

More information

Intrinsic Safety Control Drawing

Intrinsic Safety Control Drawing s Intrinsic Safety Control Drawing system in total PLC PC Not hazardous area PROFIBUS DP Associated Apparatus Class I, DIV 2, GP A...D Class I, ZN 1, IIC T4 PROFIBUS-DP Ex i Terminating resistor Class

More information

SIMATIC NET. Industrial Remote Communication - Remote Networks SINEMA Remote Connect - Client. Preface. Requirements for operation 1

SIMATIC NET. Industrial Remote Communication - Remote Networks SINEMA Remote Connect - Client. Preface. Requirements for operation 1 Preface Requirements for operation 1 SIMATIC NET Industrial Remote Communication - Remote Networks Installation and commissioning 2 Configuration 3 Operating Instructions 11/2017 C79000-G8976-C395-04 Legal

More information

Siemens Spares. Setting up security in STEP 7. Professional SIMATIC NET. Industrial Ethernet Security Setting up security in STEP 7 Professional

Siemens Spares. Setting up security in STEP 7. Professional SIMATIC NET. Industrial Ethernet Security Setting up security in STEP 7 Professional Setting up security in STEP 7 Professional SIMATIC NET Industrial Ethernet Security Setting up security in STEP 7 Professional Preface 1 User interface and menu commands 2 Basic configuration 3 Firewall

More information

SIMATIC. ET 200S distributed I/O Power module PM-E DC24..48V (6ES7138-4CA50-0AB0) Preface. Properties 1. Parameters 2. Diagnostics 3.

SIMATIC. ET 200S distributed I/O Power module PM-E DC24..48V (6ES7138-4CA50-0AB0) Preface. Properties 1. Parameters 2. Diagnostics 3. SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Power module PM-E DC24..48V (6ES7138-4CA50-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual 04/2007 A5E01119980-01

More information

SIMATIC. Distributed I/O Device ET 200iSP. Preface, Contents. Product Overview Getting Started with Commissioning. Configuration Options.

SIMATIC. Distributed I/O Device ET 200iSP. Preface, Contents. Product Overview Getting Started with Commissioning. Configuration Options. SIMATIC Distributed I/O Device ET 200iSP Manual This documentation is available under order number 6ES7152-1AA00-8BA0 Preface, Contents Product Overview Getting Started with Commissioning Configuration

More information

SIMATIC. Process Control System PCS 7 PCS 7 system documentation - Readme V8.0 SP2 (Update 1) Options for Accessing Documentation 1

SIMATIC. Process Control System PCS 7 PCS 7 system documentation - Readme V8.0 SP2 (Update 1) Options for Accessing Documentation 1 Options for Accessing Documentation 1 Notes on the Product Documentation 2 SIMATIC Notes on the PCS 7 V8.0 SP2 system documentation 3 Process Control System PCS 7 PCS 7 system documentation - Readme V8.0

More information

SIMATIC NET. Industrial Ethernet / PROFINET Primary Setup Tool (PST) Preface. Functions 1. Software installation 2. Operation. Configuration Manual

SIMATIC NET. Industrial Ethernet / PROFINET Primary Setup Tool (PST) Preface. Functions 1. Software installation 2. Operation. Configuration Manual Preface Functions 1 SIMATIC NET Industrial Ethernet / PROFINET Software installation 2 Operation 3 Configuration Manual 04/2017 C79000-G8976-C204-07 Legal information Warning notice system This manual

More information

https://support.industry.siemens.com/cs/ww/de/view/

https://support.industry.siemens.com/cs/ww/de/view/ SIMATIC PCS 7 Standard Architectures SIMATIC PCS 7 V9.0 https://support.industry.siemens.com/cs/ww/de/view/109751791 Siemens Industry Online Support Legal Information Warning notice system This manual

More information

SIMATIC. Process control system PCS 7 Operator Station (V9.0 SP1) Security information 1. Preface 2

SIMATIC. Process control system PCS 7 Operator Station (V9.0 SP1) Security information 1. Preface 2 SIMATIC Process control system PCS 7 Configuration Manual Valid for PCS 7 as of V9.0 SP1 Security information 1 Preface 2 The PCS 7 Operator Station 3 Introduction to OS configuration 4 Setting the languages

More information

Creating the program. TIA Portal. SIMATIC Creating the program. Loading the block library 1. Deleting program block Main [OB1]

Creating the program. TIA Portal. SIMATIC Creating the program. Loading the block library 1. Deleting program block Main [OB1] Loading the block library 1 Deleting program block Main [OB1] 2 TIA Portal SIMATIC Getting Started Copying program blocks 3 Copying tag tables 4 Compiling a project 5 Load project into the CPU 6 03/2013

More information

SIMATIC. ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Preface. Guide to the documentation. New properties. Product overview 3

SIMATIC. ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Preface. Guide to the documentation. New properties. Product overview 3 Preface Guide to the documentation 1 SIMATIC ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Manual New properties 2 Product overview 3 BaseUnits for I/O modules 4 BaseUnits for motor starters 5 Potential

More information

COMOS. Platform Class documentation RevisionMaster_dll. Class: RevisionInfo 1. Class: RevisionMaster 2. Programming Manual

COMOS. Platform Class documentation RevisionMaster_dll. Class: RevisionInfo 1. Class: RevisionMaster 2. Programming Manual Class: RevisionInfo 1 Class: RevisionMaster 2 COMOS Platform Class documentation RevisionMaster_dll Programming Manual 03/2017 V10.2.1 A5E39859923-AA Legal information Warning notice system This manual

More information

Preface. Guide SIMATIC. System overview. Integration into the automation system 3. IO-Link system. Function Manual 12/2017 A5E AB

Preface. Guide SIMATIC. System overview. Integration into the automation system 3. IO-Link system. Function Manual 12/2017 A5E AB Preface Guide 1 SIMATIC System overview 2 Integration into the automation system 3 Function Manual 12/2017 A5E31637677-AB Legal information Warning notice system This manual contains notices you have to

More information

SIMATIC. ET 200S distributed I/O 2AO U HF analog electronic module (6ES7135-4LB02-0AB0) Preface. Properties 1. Parameters 2.

SIMATIC. ET 200S distributed I/O 2AO U HF analog electronic module (6ES7135-4LB02-0AB0) Preface. Properties 1. Parameters 2. SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O 2AO U HF analog electronic module (6ES7135-4LB02-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 Analog value representation

More information

SIMATIC. S7-1500/ET 200MP Digital output module DQ 32x24VDC/0.5A BA (6ES7522-1BL10-0AA0) Preface. Documentation guide. Product overview.

SIMATIC. S7-1500/ET 200MP Digital output module DQ 32x24VDC/0.5A BA (6ES7522-1BL10-0AA0) Preface. Documentation guide. Product overview. Preface Documentation guide 1 SIMATIC S7-1500/ET 200MP Digital output module DQ 32x24VDC/0.5A BA (6ES7522-1BL10-0AA0) Manual Product overview 2 Wiring 3 Address space 4 Diagnostics alarms 5 Technical specifications

More information

SIMATIC. Process Control System PCS 7 Licenses and quantity structures (V8.0) Preface 1. Selecting the correct license keys 2

SIMATIC. Process Control System PCS 7 Licenses and quantity structures (V8.0) Preface 1. Selecting the correct license keys 2 Preface 1 Selecting the correct license keys 2 SIMATIC Process Control System PCS 7 Licenses and quantity structures (V8.0) Licensing of PC stations 3 Data volumes 4 Installation Manual 05/2012 A5E03805083-02

More information

Class documentation. COMOSKDictionary COMOS. Platform Class documentation COMOSKDictionary. Trademarks. General. KDictionary. Programming Manual

Class documentation. COMOSKDictionary COMOS. Platform Class documentation COMOSKDictionary. Trademarks. General. KDictionary. Programming Manual Class documentation COMOSKDictionary COMOS Trademarks 1 General 2 KDictionary 3 Platform Class documentation COMOSKDictionary Programming Manual 04/2012 A5E03777026-01 Legal information Legal information

More information

DANGER indicates that death or severe personal injury will result if proper precautions are not taken.

DANGER indicates that death or severe personal injury will result if proper precautions are not taken. Introduction 1 SIMATIC Embedded Automation Programming 2 Functions 3 A Appendix Programming Manual 08/2010 A5E01716340-03 Legal information Legal information Warning notice system This manual contains

More information

MindSphere. Visual Explorer. Introduction. User roles for "Visual Explorer" Connecting "Visual Explorer" to MindSphere data. Creating Visualizations

MindSphere. Visual Explorer. Introduction. User roles for Visual Explorer Connecting Visual Explorer to MindSphere data. Creating Visualizations Introduction 1 User roles for "Visual Explorer" 2 MindSphere Connecting "" to MindSphere data 3 Creating Visualizations 4 Getting Started 06/2018 Legal information Warning notice system This manual contains

More information

Fail-Safe Group Shutdown of the ET 200SP F-Motor Starter with F-DQ SIMATIC Safety Integrated https://support.industry.siemens.com/cs/ww/en/view/109748128 Siemens Industry Online Support Warranty and Liability

More information

Certificate Z SIMATIC S7 Distributed Safety

Certificate Z SIMATIC S7 Distributed Safety Annex 1 of the Report to the Certificate Z10 16 06 67803 012 Safety-Related Programmable System SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision

More information

Product information on the documentation of the. ET 200SP distributed I/O system SIMATIC ET 200SP. ET 200SP distributed I/O system.

Product information on the documentation of the. ET 200SP distributed I/O system SIMATIC ET 200SP. ET 200SP distributed I/O system. Product information on the documentation of the ET 200SP distributed I/O system SIMATIC Preface Overview of the ET 200SP 1 General additions to the documentation 2 ET 200SP Product information on the documentation

More information

Line reactors SINAMICS. SINAMICS G120P Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation 4

Line reactors SINAMICS. SINAMICS G120P Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation 4 Safety information 1 General 2 SINAMICS SINAMICS G120P Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.6 11/2013 A5E32845290B AA

More information

Certificate Z SIMATIC S7 Distributed Safety

Certificate Z SIMATIC S7 Distributed Safety Annex 1 of the Report to the Certificate Z10 17 05 67803 015 Safety-Related Programmable System SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision

More information

Performance data abgn SCALANCE W770/W730 SIMATIC NET. Industrial Wireless LAN Performance data abgn SCALANCE W770/W730.

Performance data abgn SCALANCE W770/W730 SIMATIC NET. Industrial Wireless LAN Performance data abgn SCALANCE W770/W730. Performance data 802.11 abgn SCALANCE W770/W730 Technical data 1 SIMATIC NET Industrial Wireless LAN Performance data 802.11 abgn SCALANCE W770/W730 Reference Manual 07/2014 C79000-G8976-C370-01 Legal

More information

SIMATIC. ET 200SP Open Controller Product information on CPU 1515SP PC. Preface. Product Information. Technical update. Technical specifications 3

SIMATIC. ET 200SP Open Controller Product information on CPU 1515SP PC. Preface. Product Information. Technical update. Technical specifications 3 1BProduct information on CPU 1515SP PC Preface Product Information 1 SIMATIC ET 200SP Open Controller Technical update 2 Technical specifications 3 Product Information 09/2015 A5E35456639-AC 3BLegal information

More information

Performance data abgn PCIe Minicard MPCIE-R1-ABGN-U3 SIMATIC NET

Performance data abgn PCIe Minicard MPCIE-R1-ABGN-U3 SIMATIC NET Performance data 802.11abgn PCIe Minicard MPCIE-R1-ABGN-U3 Technical specifications 1 SIMATIC NET Industrial Wireless LAN Performance data 802.11abgn PCIe Minicard MPCIE-R1-ABGN-U3 Reference Manual 07/2014

More information

SIMATIC. S7/HMI SIMATIC Automation Tool V3.1 SP1 product information. SIMATIC Automation Tool features 1. Known problems. Product Information

SIMATIC. S7/HMI SIMATIC Automation Tool V3.1 SP1 product information. SIMATIC Automation Tool features 1. Known problems. Product Information SIMATIC Automation Tool features 1 Known problems 2 SIMATIC S7/HMI SIMATIC Automation Tool V3.1 SP1 product information Product Information V3.1 SP1, 05/2018 A5E43714043-AA Legal information Warning notice

More information

ET 200S Motor Starters and Safety Motor Starters

ET 200S Motor Starters and Safety Motor Starters Overview for Standard motor starters Control kit The control kit for the Standard motor starter provides the possibility of testing the motor during start-up or service by actuating the motor starter protector.

More information

No. Product Information Drawing number Edition

No. Product Information Drawing number Edition SIMATIC Bus links SIMATIC Bus links SIMATIC Bus links DP/PA coupler, DP/PA link and Y link Operating instructions The following supplement is part of this documentation: No. Product Information Drawing

More information

SINEMA Remote Connect - Client SIMATIC NET. Industrial Remote Communication SINEMA Remote Connect - Client. Preface. Requirements for operation

SINEMA Remote Connect - Client SIMATIC NET. Industrial Remote Communication SINEMA Remote Connect - Client. Preface. Requirements for operation Preface Requirements for operation 1 SIMATIC NET Industrial Remote Communication Installation and commissioning 2 Configuration 3 Operating Instructions 07/2015 C79000-G8976-C395-02 Legal information Warning

More information

SIMATIC. SIMATIC Logon V1.6. Security information 1. Conditions for secure operation of SIMATIC Logon 2. User management and electronic signatures 3

SIMATIC. SIMATIC Logon V1.6. Security information 1. Conditions for secure operation of SIMATIC Logon 2. User management and electronic signatures 3 Security information 1 Conditions for secure operation of SIMATIC Logon 2 SIMATIC Configuration Manual User management and electronic signatures 3 Hardware and Software Requirements 4 Scope of delivery

More information

BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/ Giá chưa bao gồm thuế VAT

BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/ Giá chưa bao gồm thuế VAT BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/2011 - Giá chưa bao gồm thuế VAT NO I SIMATIC S7-300 Central Processing Unit 1 6ES7312-1AE13-0AB0 SIMATIC S7-300, CPU 312 CPU WITH MPI INTERFACE, INTEGRATED

More information

SIMATIC. PCS 7 process control system PCS 7 SMART (V9.0) Security information 1. Preface 2. System Requirements 3. Licenses 4

SIMATIC. PCS 7 process control system PCS 7 SMART (V9.0) Security information 1. Preface 2. System Requirements 3. Licenses 4 Security information 1 Preface 2 SIMATIC PCS 7 process control system Operating Instructions System Requirements 3 Licenses 4 Differences between PCS 7 SMART and PCS 7 ASIA 5 Switching from PCS 7 SMART

More information

https://support.industry.siemens.com/cs/ww/en/view/

https://support.industry.siemens.com/cs/ww/en/view/ Fail-Safe Group Shutdown of the ET 200SP F-Motor Starter with F-PM-E SIMATIC Safety Integrated https://support.industry.siemens.com/cs/ww/en/view/109748128 Siemens Industry Online Support Warranty and

More information

Load Feeders. Communication-capable load feeders

Load Feeders. Communication-capable load feeders Load Feeders /2 Introduction Communication-capable load feeders ET 200S /4 ET 200S motor starters /8 Power modules for ET 200S motor starters /9 SIGUARD safety systems for ET 200S motor starters /10 ET

More information

SIMATIC. PCS 7 process control system CPU 410 Process Automation/CPU 410 SMART. Preface 1. Introduction to the CPU 410. Configuration of the CPU 410 3

SIMATIC. PCS 7 process control system CPU 410 Process Automation/CPU 410 SMART. Preface 1. Introduction to the CPU 410. Configuration of the CPU 410 3 SIMATIC PCS 7 process control system CPU 410 Process Automation/CPU 410 SMART System Manual 05/2017 A5E31622160-AC Preface 1 Introduction to the CPU 410 2 Configuration of the CPU 410 3 PROFIBUS DP 4 PROFINET

More information

CPU 410-5H Process Automation SIMATIC. PCS 7 process control system CPU 410-5H Process Automation. Preface 1. Introduction to CPU 410-5H

CPU 410-5H Process Automation SIMATIC. PCS 7 process control system CPU 410-5H Process Automation. Preface 1. Introduction to CPU 410-5H SIMATIC PCS 7 process control system System Manual Preface 1 Introduction to CPU 410-5H 2 Structure of the CPU 410-5H 3 I/O configuration variants 4 PROFIBUS DP 5 PROFINET IO 6 Operator controls and operating

More information

SIMATIC. Process Control System PCS 7 Product Brief on Software Updates from V5.1/V5.2 to PCS 7 V7.0 SP1. Preface 1

SIMATIC. Process Control System PCS 7 Product Brief on Software Updates from V5.1/V5.2 to PCS 7 V7.0 SP1. Preface 1 SIMATIC Process Control System PCS 7 SIMATIC Process Control System PCS 7 Product Brief on Software Updates from V5.1/V5.2 to PCS 7 V7.0 SP1 Commissioning Manual Preface 1 Before beginning the software

More information

SIMATIC. Automation system Fail-safe signal modules. Preface. Product overview 1. Configuration options 2. Configuration and parameter assignment

SIMATIC. Automation system Fail-safe signal modules. Preface. Product overview 1. Configuration options 2. Configuration and parameter assignment SIMATIC Automation system SIMATIC Automation system Installation and Operating Manual The following supplement is part of this documentation: No. Product Information Drawing number Edition 1 SM 336; F-AI

More information

SIMATIC. Process control system PCS 7 PCS 7 - PC Configuration (V9.0 SP1) Security information 1. Preface 2. PC components of a PCS 7 system 3

SIMATIC. Process control system PCS 7 PCS 7 - PC Configuration (V9.0 SP1) Security information 1. Preface 2. PC components of a PCS 7 system 3 Security information 1 Preface 2 SIMATIC Process control system PCS 7 Installation Manual PC components of a PCS 7 system 3 Hardware for PC stations 4 Installing PC stations 5 Appendices 6 Valid for PCS

More information

COMOS. Lifecycle FLEXnet License Installation and Management. Security information 1. Notices 2. License types 3. Get the HostID 4.

COMOS. Lifecycle FLEXnet License Installation and Management. Security information 1. Notices 2. License types 3. Get the HostID 4. Security information 1 Notices 2 COMOS Lifecycle FLEXnet License Installation and Management Operating Manual License types 3 Get the HostID 4 Licenses Files 5 Installing the License Server 6 License Installation

More information

S7-300 Getting Started - Commissioning a CPU 31xC: Closed-loop control

S7-300 Getting Started - Commissioning a CPU 31xC: Closed-loop control Getting Started - Commissioning a CPU Introduction 1 31xC: Closed-loop control Preparation 2 SIMATIC S7-300 Getting Started - Commissioning a CPU 31xC: Closed-loop control Learning units 3 Further Information

More information

SIMATIC. ET 200SP Digital output module DI 8x24VDC SRC BA (6ES7131-6BF61-0AA0) Preface. Documentation guide. Product overview.

SIMATIC. ET 200SP Digital output module DI 8x24VDC SRC BA (6ES7131-6BF61-0AA0) Preface. Documentation guide. Product overview. Preface Documentation guide 1 SIMATIC ET 200SP Digital output module DI 8x24VDC SRC BA (6ES7131-6BF61-0AA0) Manual Product overview 2 Wiring 3 Parameters/address space 4 Interrupts/diagnostics alarms 5

More information