Sapphire 24W 650mA-1000mA LED Driver Phase Dimmable

Transcription

1 DIGINET CONTROL SYSTEMS DATA SHEET Sapphire 24W 650mA-1000mA LED Driver Range DGLC1 000C25PD Overview Designed for easy installation, long lifetime and high efficiency, this high quality, Australian designed LED driver delivers between 650mA and 1 000mA in 50mA increments at 1 2V dc to 21 V dc. Features Delivers between 650mA & 1 000mA in 50mA manually selectable steps, at 1 2V dc to 24V dc. Designed for use in LED downlights, spot/accent luminaries and linear LED lighting systems. Pre-terminated with an Australian/NZ 240V ac 1 0A mains rated flex and plug. Includes a 4-pin connector for connecting a Gerard Lighting 4-pin LED lamp. Provides an additional dc output with screw terminals for use with 3 rd party LED lamps. Smooth dimming from 1% - 100% via a standard phase angle controlled dimmer. When used in conjunction with GLG LED lamps, an active thermal windback feature is provided to protect against LED damage due to overheating. Compatible with leading edge, universal and trailing edge dimmers. Includes open circuit / short circuit detection. Compatible with GLG LED lamps, including both Sunset Dim and Constant Colour LED lamps. Supplied with a tool removable mains terminal cover with built-in cable clamps for strain relief. Dimensions Data Sheet DGLC1000C25PD. Edition 01 Subject to change without notice Latest updates available at 1 of 3 pages

2 Driver Connections Data Sheet DGLC1000C25PD. Edition 01 Subject to change without notice Latest updates available at 2 of 4 pages

3 Dimmer Compatibility Setting The DC Output Current Leading edge dimmers A series of DIP Switches are incorporated on the driver to allow the output current to be configured. Minimum number of drivers connected to a Leading Edge Dimmer Dependant on the minimum load rating of specific leading edge dimmers. Diginet have carried out dimming performance testing of 3rd party manufacturers dimmers when used in conjunction with this driver. Contact Diginet or visit for further information. Constant current value Diginet Digiset 4-pin lamps 2 650mA DIP Switch Setting Manual / Auto Current setting Automatic mode. This Setting is for Gerard Lighting 4-pin lamps only 700mA Maximum number of drivers connected to a Leading Edge Dimmer Dependant on the input capacitance of specific leading edge dimmers. Diginet have carried out testing to determine the maximum number of drivers which can be used in conjunction with specific 3rd party manufacturers dimmers. Contact Diginet or visit for further information. 750mA 800mA 850mA Trailing Edge and Universal dimmers The limitations described above for leading edge dimmers do not generally apply to trailing edge or universal dimmers used in conjunction with the driver. Generally, a minimum of one trailing edge / universal dimmer can be used with one driver to achieve satisfactory dimming performance and the dimmer can be loaded to its full load capacity. 900mA 1 950mA mA 1 1 Where LED load voltage 21 V and the selected current exceeds 850mA, an internal override operates to limit output current to 850mA. Data Sheet DGLC1000C25PD. Edition 01 Subject to change without notice Latest updates available at 3 of 4 pages

4 2 The Diginet Digiset feature enables automatic current setting between Diginet lamps and drivers. Data Sheet DGLC1000C25PD. Edition 01 Subject to change without notice Latest updates available at 4 of 4 pages

5 Specifications Electrical Mechanical Nominal Mains Supply Voltage V dc Housing material Nominal Mains Supply Frequency 50/60Hz Input Current 1 240V typical Mains connection cable Maximum Input Power 24W dc terminals for LED lamps Input PF 0.95 typical Flame Retardant Polycarbonate 1.5m long, pre-terminated with Australian/NZ 240V ac 1 0A mains plug 1 x 2.5mm 2 maximum per terminal or 2 x 1.5mm 2 maximum per terminal Input THD Rated Output Current Nominal Output Voltage Range <1 5% typical CC Mode: 1 000mA (+/- 5%) at 1 8V; 850mA (+/- 5%) at 21 V CV Mode: 750mA (+/- 5%) at 24V V dc Mains Terminals Connector to Gerard Lighting lamps 2 x 2.5mm 2 maximum per terminal or 3 x 1.5mm 2 maximum per terminal 4-pin socket connector Working Output Voltage Limits 1 0V dc 24V dc Weight 230g Line Voltage Regulation 1 00% Dimensions See separate diagram Nominal No-load Output Voltage 25.5V Environmental Short-Circuit Output Current 2.5A Ambient Operating Short-Circuit Load Auto-recover Temperature Efficiency at Maximum Load 78% Off-state Standby Power 0.75W Maximum Case Temperature 0 C to +50 C 85 C (@ ta=50 C) Dimming Range 1%-1 00% Operating Humidity < 95% RH non condensing Turn-on Delay 1 00ms typical IP Rating IP20 Phase Dimmer Compatibility Maximum Load Power Approvals & Compliance Suitable for Leading Edge, Universal, or Trailing Edge Dimmers 1 8W CONTACT INFORMATION PRODUCT OF DIGINET CONTROL SYSTEMS PTY LTD Web General Enquiries: DALI (3254) sales@diginet.net.au ABN Technical Services: support@diginet.net.au Gow Street Fax: Padstow NSW A MEMBER OF THE GERARD LIGHTING GROUP The product includes a FIVE-YEAR WARRANTY against manufacturing defects. Fully warranty terms can be found here COPYRIGHT. This document is copyright to Diginet Control Systems Pty Ltd. Except as permitted under relevant law, no part of this user and installation guide may be reproduced by any process without written permission of and acknowledgement to Diginet. DISCLAIMER. Diginet Control Systems Pty Ltd (Diginet) reserves the right to alter the specifications, designs or other features of any items and to discontinue any items at any time without notice and without liability. While every effort is made to ensure that all information in this user and installation guide is correct, no warranty of accuracy is given and Diginet shall not be liable for any error. TRADEMARKS. The identified trademarks and copyrights are the property of Diginet Control Systems Pty Ltd unless otherwise noted. Data Sheet DGLC1000C25PD. Edition 01 Subject to change without notice Latest updates available at 5 of 4 pages