Taxonomies, Classifications, and Categories Residential dimmers, motion sensors, controls, & photo cells WALL DIMMER

Transcription

1 3804 South Street , TX Nacogdoches Phone: Fax: Lutron Catalog Number Manufacturer Description Weight per unit Product Category Features Load Rating Load Type Operation Type Operator Type Voltage Rating Wall Plate Type Material, Color, and Finish Finish Descriptions Commodity Description Description Long Description Product Type GL603PHWH 3WAY 600W Preset Dimmer Manufacturer Information Brand Manufacturers Part Number Model GL603PHWH Lutron Preset Dimmer, Wall Dimmer; Preset Slide With Push On/Off Switch Operator; Operation Type Three Way; 120 V At 60 HZ; Incandescent Load; 600 W Load; Traditional (Not Included) Wall Plate; White Gloss; Approval Ul, Nom; Standard Package Clamshell N/A Lighting Dimmers 600 W INCANDESCENT THREE WAY PRESET SLIDE WITH PUSH ON/OFF SWITCH 120 V AT 60 HZ TRADITIONAL (NOT INCLUDED) WHITE GLOSS LIGHTING DIMMERS 3WAY 600W PRESET DIMMER PRESET DIMMER, WALL DIMMER; PRESET SLIDE WITH PUSH ON/OFF SWITCH OPERATOR; OPERATION TYPE THREE WAY; 120 V AT 60 HZ; INCANDESCENT LOAD; 600 W LOAD; TRADITIONAL (NOT INCLUDED) WALL PLATE; WHITE GLOSS; APPROVAL UL, NOM; STANDARD PACKAGE CLAMSHELL Lighting Dimmer Lutron GL-603PH-WH GL-603P Taxonomies, Classifications, and Categories Category Description Residential dimmers, motion sensors, controls, & photo cells Type WALL DIMMER Packaging Carton 1 Standard Package CLAMSHELL Weight Per each 0

2 3804 South Street , TX Nacogdoches Phone: Fax: Uses, Certifications, and Standards Approval UL, NOM

3 Traditional wallplate opening Glyder dimmers and fan controls 2.86 in (73 mm) Product family features Slide adjusts light to your desired level 100% factory tested Coordinating Fassada wallplates only available separately Custom engraving available for wallplates, see pg in (117 mm).23 in (5.8 mm) profile Control types Single-pole (one location) 3-way or 4-way (two or more locations) Direct load type compatibility Incandescent/halogen lighting Magnetic low-voltage lighting Ceiling fans Lighting load interfaces are not compatible with this family. Shown actual size: Glyder dimmer and 1-gang Fassada wallplate in White (WH). Download high resolution product image 111 Volume 1 P/N REV B

4 Traditional wallplate opening Glyder dimmers and fan controls Available finishes Use BOLD color code in model number (Example: GL-600P-IV) Gloss finishes* WH White IV Ivory *Coordinating wallplates only available separately. For wallplate information, see pg Volume 1 P/N REV B 112

5 Traditional wallplate opening Glyder dimmers and fan controls Dimmers with on/off switch Button turns on/off Slide up to brighten, down to dim Slide-to-off dimmers Slide up to on/brighten, down to dim/off Incandescent/halogen dimmers Dimmers with on/off switch Single-pole GL-600P-XX V 600 W Single-pole GL-10P-XX 1 120V 1000 W 3-way GL-603P-XX V 600 W 3-way GL-103P-XX V 1000 W Incandescent/halogen dimmers Slide-to-off dimmers Single-pole GL-600-XX V 600 W Single-pole GL-1000-XX V 1000 W Magnetic low-voltage dimmers Slide-to-off dimmer Single-pole GLV-600-XX V 600 VA (450 W) The stated VA (Volt-Ampere) rating includes the magnetic transformer heat losses and the lamp load. The stated W (Watt) rating is the maximum lamp wattage based on assumed 20% transformer loss. XX 1 : Gloss White (WH) and Ivory (IV), see pg. 112 (Wallplates not included. Order separately, see pg. 175) All models must be derated if ganged unless otherwise noted, see pg Volume 1 P/N REV B

6 Traditional wallplate opening Glyder dimmers and fan controls Connections overview Load connections* Incandescent/ Halogen Magnetic Low-Voltage Ceiling Fan MLV Transformer (by others) Incandescent/ Halogen Dimmer MLV Dimmer Fan Control Control types (for 2 or more locations) Dim from one location, switch from the others Light Source 3-way Dimmer 3-way Switch** Light Source 3-way Dimmer 4-way Switch** (1 or more) 3-way Switch** ** For 3-way and 4-way control, use 3-way dimmer with mechanical 3-way or 4-way switches. Download complete Connection Diagrams *For illustration purposes only. Consult model number pages for specific voltage and capacity information. 115 Volume 1 P/N REV B

7 Appendix Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in) Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D) Standard multi-gang installation: Uses standard multi-gang electrical backboxes Uses standard multi-gang wallplates Requires fins to be removed from dimmers for proper spacing ( Fins Broken ganging) May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181 B C D 2-gang box (W: 4 in x H: 3 in x D: 2.5 in) 3-gang box (W: 6 in x H: 3 in x D: 2.5 in) 4-gang box (W: 8 in x H: 3 in x D: 2.5 in) Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: May require customized, wider-thanstandard wallplates May require wider-than-standard electrical backboxes Allows full capacity ( No Fins Broken ) ganging Required for Nova dimmers and for larger width (high capacity) architectural controls Visit for additional information Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. E F (2) 1-gang boxes with 3 /4 in spacer Junction box (W: 4 in x H: 4 in x D: 2.5 in) Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided. G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in) 179 Volume 1 P/N REV B

8 Appendix Visual index Maximum Wattage Indicated by the first two, three, or four numbers: Watts Watts Watts Watts 10 or Watts Watts Watts 5 5 Amp 6 6 Amp 8 8 Amp Additional Features Letters that follow the wattage (prior to the hyphen) indicate other special features: P Preset NL Night Light H Clamshell Packaging W With Wallplate DC Dimmable Compact Fluorescent Voltage Operating voltage is 120 V unless indicated V 10 3 P WH Single-pole/3-way/ multi-location Indicated by the number at the end of the wattage: 0 Single-pole 3 3-way M Multi-location 2 Dual Control Color Suffix * To order the specific color desired, add the color suffix to the end of the model number: WH White IV Ivory AL Almond LA Light Almond BE Beige TP Taupe GR Gray SI Sienna BR Brown BL Black BN Bright Nickel BC Bright Chrome CLA Clear Anodized Aluminum SC Satin Chrome SN Satin Nickel QZ Antique Bronze BB Bright Brass BRA Brass Anodized Aluminum SB Satin Brass QB Antique Brass BLA Black Anodized Aluminum SW Snow LS Limestone BI Biscuit ES Eggshell PD Palladium ST Stone BG Bluestone PL Plum SG Sea Glass TQ Turquoise GS Goldstone DS Desert Stone GB Greenbriar MS Mocha Stone TC Terracotta HT Hot MR Merlot MN Midnight SS Stainless Steel * Some colors not available with certain families. Consult family pages or contact customer service Volume 1 P/N REV B 210