ADA ibase & ibase extender Kit

Transcription

1 ADA & Kit PRELIMINARY INSTALLATION & USER MANUAL VER.. SEPTEMBER Mamaroneck Avenue, White Plains, NY, 65, -8-HD-AUDIO, Fax (94)

2 Contents Introduction... Docking & Undocking the... Docking the while playing a song... Setting the Lighting Mode... Getting Started - If hardware is already installed... 4 Keypad Control of the... 5 Additional Keypad Features... 6 Setup Description... 7 Kit Description... 8 & extender ing... 9 Standalone Installation... Install Option Cat. 5 Cables... Install Option Cat. 5 & Cond. Wire... Install Option One Cat. 5 Cable... Install Option 4 One Cat. 5 Cable... 4 RS- Protocol - ADA Special CD Commands for... 5 Introduction The ADA,, and WP (Wall Plate) are designed to permit the Apple, Mini and Photo to play through, and be controlled by, an ADA multi-room system. These systems include ADA s Suite 8x8, Suite 6 and HTR-4. Users can control and navigate the s music database from ADA keypads, making it easy to select music (or audiobooks) by playlist, genre, artist, album or song (or audiobook). The, when used with the and WP, display information in real time on ADA keypads that feature a display. When using an ISO-E ( to Ethernet), ISO-CAT-II ( to RS-), or ISO-USB ( to USB) converter device, the provides control and feedback to touchscreen control systems. The has several address settings that permit multi-line text feedback specifically for touchscreens. When using both ADA keypads and touchscreens together in a system, specific address settings can be used to provide feedback to both single line display ADA keypads and multiple line touchscreen feedback windows. The with the optional and the WP can be used in any number of different installation scenarios. Also, multiple s can be used in a single installation (up to eight). Finally, the can also be used on its own as an attractive and functional docking base for the family of music players. 5 Audio Design Associates, Inc., All rights reserved. Audio Design Associates, Inc., ADA,,, & are trademarks of Audio Design Associates, Inc. itunes, Apple and are trademarks of Apple Computer Inc., registered in the U.S. and other countries. Specifications and features are subject to change without prior notice. July Manual Ver..

3 Docking & Undocking the Definitions: Remote Control Mode - The is controlled by the ADA system keypads and/or touchscreens. Music Photos Extras Settings Shuffle Songs Backlight Control Mode - The is controlled by its touch wheel. No ADA system control. The has two push-buttons on the front right corner of the unit. The outer button and its associated green LED is the Control Mode button. When you place the in the ADA it will be automatically sensed and placed into Remote Control mode. This process normally takes a few seconds and is indicated by the plexiglass back going through a red-yellow-green color sequence. The green LED illuminates when the is docked. By pressing the Control Mode button it will place the into the Control mode, allowing you to control it directly from the s touch wheel. If you change back and forth between Remote Control mode and Control mode, expect a delay as the resets its sequence. Whenever the is switched between Remote Control mode and Control mode, the song playing will stop and the current selection will clear..net Music Photos Extras Settings Shuffle Songs Backlight Control Mode button set to Control.NET Control Mode button set to Remote Control Manual Ver July 5

4 Docking the while playing a song If you are listening to a song on your and want to dock the without interupting the song, press and hold the Control Mode button while you insert the into the. Release the Control Mode button when the is firmly seated in the. The will dock in the Control mode and the song will continue to play. If you want to switch the to the Remote Control mode, press the Control Mode button. The song will stop playing, the current selection will clear and the will switch to the Remote Control Mode. Music Photos Extras Settings Shuffle Songs Backlight Press & Hold the Control Mode Button While Docking the to continue playing a selection. Setting the Lighting Mode The inner button on top of the switches between the light display modes that illuminate the plexiglass against which the sits. You can create two different lighting setups - one for when the is docked and one for when it is removed from the. Light Mode Button Set when is undocked. When removed, there are eight settings. You can select one of seven solid colors or off. When the is on the, there are twelve settings; four audio controlled modes (light organ), seven solid colors, and off. Each time you press the Light Mode button it changes to the next mode..net Light Mode Button Set when is docked. Your selection is stored in nonvolatile memory so it will illuminate the same way each time the is on the or removed. If you select one of the audio controlled modes while the ipod is stopped, paused, or playing a quiet track, the plexiglass won t illuminate. The audio controlled modes change in color based on the audio level, like a color organ. The first two audio controlled modes have fixed filters to control the colors (different colors assigned to different frequencies) with two different modulation rates (slow light show or fast light show). The second pair of audio controlled modes are randomized (progressive color changes independent of frequencies) with two different modulation (speed) rates. July Manual Ver..

5 Getting Started (If & are installed) If you have selected the appropriate on your ADA keypad and no is inserted into the, the keypad s display will read NO ipod v#.# where the #.# indicates the s software release number. Insert the into the cradle, seating it firmly on the docking connector. The will begin to connect to the and the ADA system automatically. T C N D S D A AT VD UX Music Photos Extras Settings Shuffle Songs Backlight Music Photos Extras Settings Shuffle Songs Backlight 4.NET 5 As the begins to dock with the, the s display will show a checkmark followed by the ADA logo once fully docked. Also, the plexiglass back plate will illuminate first red, then yellow, then green as the is being docked. Once docked, the selected docked lighting mode will be activated. Note that for a light organ setting, no light will be shown until music is playing. Keypads will display the following sequence resting on the term ipod STOPPED. T N S AT D VD A UX ADJ ABC DEF T N S AT D VD A UX ADJ ABC DEF T N S AT D VD A UX ADJ ABC DEF ADJ T N S AT D VD A UX ABC DEF Manual Ver July 5

6 Keypad Control of the ADA keypads operate the similarly to its touch wheel. Once T T T C C S D A N N N D D AT VD UX the is fully T T T C C S D A N N N D D AT VD UX docked, and in the Remote Control mode, pressing either the << or >> buttons on the keypad will scroll through the top level of the s directory. Here, there are six options including Playlist, N N N D D AT VD UX T T T C C S D A N N N D D AT VD UX T T T C C S D A Genre, Artists, Songs, Albums, and Audiobooks. The < on the far right of the display indicates that you are in a navigation mode. While the display is showing the option you want, press the Play button (>) or the ER button to select. T T T C C S D A N N N D D AT VD UX T C N D S D A AT VD UX T N S AT D VD A UX T N S AT D VD A UX ADJ ABC DEF T N S AT D VD A UX ADJ ABC DEF T N S AT D VD A UX ABC DEF For example, while on ARTISTS, pressing the Play button (>) might display the first artist, Beach Boys< where the < arrow indicates you that you are in the navigation mode. By pressing the Play button (>), the display will read ALL ALBUMS<. Pressing the Play button (>) again will display Surfin USA<. Another press of the Play button (>) will play the first track of the Surfin USA album. The flow chart below details the s menu structure. ADJ ADJ ABC DEF July Manual Ver..

7 Additional Keypad Features FF & REW Menu navigation. If a song is playing, press the >> or << buttons to get ( >> & << ) to the current menu level. Press the or > buttons to move into and out of these menus. Forward Play If in navigation menu, selects choice. ( > ) If stopped and menu not changed to different level, play last track. If playing, track skip. If paused, unpause. Button If in navigation menu, stop, or pause, goes up a level for each press. If track playing, recalls artist, album, title information. Pause ( ) pauses if it is playing. T C N D S D A AT VD UX ER Button If in navigation mode, selects choice. If playing and menu not changed to different level, restarts track. If stopped and menu not changed to different level, plays track. Stop ( [] ) will stop. T T T C C S D A N N N D D AT VD UX LEFT & RIGHT Track skip up and down. Also chapter skip for audiobooks. Reverse Play ( < ) Shuffle On/Off. T T T C C S D A N N N D D AT VD UX T T T C C S D A N N N D D AT VD UX ADJ UP & DOWN While playing, audibly scans through track. Source Button Places into Shuffle Play mode and plays all songs in random order. ( CD, CD, etc. ) To turn off the Shuffle Play mode, press the < button. Manual Ver July 5

8 Description The ADA features a metal base with a plexiglass mount. The connector for the is at the bottom of the plexiglass in the front of the. There are also two buttons and two LEDs on the top plate of the. These set the lighting mode and Control mode of the. Docking Connector Light Mode Selection Control Mode or Remote The unit has various connectors on the rear panel. There is a DC jack for local power and an address switch set for control and feedback options. The pin port (RJ-5 connector) provides DC power, ADA Bus communication and balanced audio in a single wire, which affords neat installations. Using the RJ-5 port allows the to be placed long distances (tested up to 6 of Cat. 5 wire) from the main equipment rack while maintaining audio quality and remote data control. When using the in this manner, the ADA and WP (Wall Plate) accessories must be used. The should be placed at the audio equipment end of the wiring run, converting the balanced audio back to unbalanced audio (RCA jacks) and the control data to data. DC Input Switch extender Port For Photos, there are a composite video and S-Video outputs. Currently there are no remote control codes for photo display operations. Stereo audio outputs are provided through standard RCA connectors and as balanced audio through the extender port ( pin RJ-5 connector). You may use both simultaneously. S-Video Out Composite Video Out Stereo Audio Out July Manual Ver..

9 Kit Description The ADA Kit includes three items: the, the WP (Wall Plate) and the RJ-5 wire that connects the WP to the. AC Input extender VAC 5mA Audio Output L R Output Level Audio Output Level Control The should be located at the main equipment location. It features stereo audio outputs on its front panel for connection to the music system. The Audio Output Level Control permits you to adjust the output level of the prior to preamplification. There is also a low voltage AC input jack for connection to the included transformer. WP (Wall Plate) Connector Stereo Audio Out Switch Connector The back of the features a ten pin screw terminal connector which is attached to the wires between the and the WP (Wall Plate). There is also an screw terminal connector for wiring to a WH- or WH-4 Wiring Harness. The switch is used to set the address of the and must match that of the. The WP is the wall plate to which the is connected. ADA also provides the flat wire with -pin RJ-5 connectors in a ten foot length for connection of the WP to the. The front of the WP features the RJ-5 jack as well as a low voltage DC input jack. DC Input Optional DC -WP (Wall Plate) To wire, use /ma Pin Screw Terminal Connector to RJ-5 Connectors Connector See the various installation options in this manual for more information. ' Wire Manual Ver July 5

10 & extender ing The backs of both the and the have a rotary switch with sixteen position options labeled -9 and A-F. These are described in the chart at the bottom of the page. To ensure proper communication with ADA keypads and/or touchscreen control systems, the address you select must match the source control settings of the keypads and/or touchscreen control system. It is extremely im- portant that both the and the extender be set to the exact same address at all times ADA Keypad Text Displays - The transmits the first 4 characters of text information generated by the. ADA keypads that feature a character display require text feedback to be sent in strings containing characters. If a data field (status, song, artist, album, playlist, genre or audiobook) contains more than characters, the keypad will scroll all characters (up to 4) across the display once, then rest on the first characters. When displaying multiple data fields, the fields display one at a time. There are eight Special CD address options permitting up to eight s to be included in a single installation. Please note that with each additional / on the system, the system s data traffic will increase, which might slow down control and feedback operations. Touchscreens - The displays all four data fields (status, artist, album, song) at once. Touchscreen feedback is limited to 6 characters per field and does not scroll text. Combination es - For systems using both ADA keypads and touchscreens, there are four address options that will provide data to both at the same time. Control Codes - The control codes are the same for keypad or touchscreen settings. As such, if you are controlling the via the from a touchscreen and are not getting any feedback, try the same Special CD address number using the alternate feedback option (instead of four line, try single line). Legacy ADA Keypad Systems - Legacy systems typically operated at baud and used segmented LED displays that only represent capital letters. For these systems, you can use one set to address F. Here the will generate only capital letters and communicate at baud. Setting Keypad Setting Touch Screen Setting Baud Rate Notes SPECIAL CD NA 9 Single Line Feedback Only SPECIAL CD NA 9 Single Line Feedback Only SPECIAL CD NA 9 Single Line Feedback Only SPECIAL CD 4 NA 9 Single Line Feedback Only 4 SPECIAL CD 5 NA 9 Single Line Feedback Only 5 SPECIAL CD 6 NA 9 Single Line Feedback Only 6 SPECIAL CD 7 NA 9 Single Line Feedback Only 7 SPECIAL CD 8 NA 9 Single Line Feedback Only 8 SPECIAL CD SPECIAL CD 9 Single Line & Four Line Feedback 9 SPECIAL CD SPECIAL CD 9 Single Line & Four Line Feedback A SPECIAL CD SPECIAL CD 9 Single Line & Four Line Feedback B SPECIAL CD 4 SPECIAL CD 4 9 Single Line & Four Line Feedback C NA SPECIAL CD 9 Four Line Feedback Only D NA SPECIAL CD 9 Four Line Feedback Only E NA SPECIAL CD 9 Four Line Feedback Only F SPECIAL CD NA Single Line Feedback - Capital Letters Only July Manual Ver..

11 Standalone Installation DC The can be used as a standalone docking station for the. In this case, power, and and audio connections are made directly at the. The setting of the switch is unimportant. ma XFormer R&L Audio to Stereo System Composite Video and/or S-Video to TV or other display ( Photo) Music Photos Extras Settings Shuffle Songs Backlight Press and hold the Control Mode button as you dock the into the to prevent the from entering the Remote Control mode. In the event that you dock the and it does go into Remote Control mode, press the Control Mode button to set the to Remote Control Mode. The s normal display will return. Press & Hold the Control Mode Button While Docking the Music Photos Extras Settings Shuffle Songs Backlight Control Mode button set to Control You can also set two lighting modes, one while the is undocked and a different one when it is docked. The will remember the lighting options even if the power is disconnected. Light Mode Button Set when is undocked. Music Photos Extras Settings Shuffle Songs Backlight Light Mode Button Set when is docked. Manual Ver July 5

12 Install Option When installing the into a system where two Cat. 5 cables are run between the WP and the, ADA recommends wiring the four balanced audio lines & the control lines on one cable with the power wires on the other Cat. 5 cable. Each power terminal is connected with -pairs of wires. When running more than s on an HTR-4, you have to plug in the power supply on the WP or. The HTR-4 does not provide enough power for more than two s. Critical Installation Notice - It is imperative that you terminate the wires correctly, pin to pin. WH- or WH-4 System Wiring Harness Two Cat. 5 Cables.NET RS- Control & Feedback To Suite 8x8, Suite 6, or HTR-4 ISO-CAT-II RS- B CTS RX TX ISO-CAT II OVER LOAD A Sw. I n = I Sw. O ut = O Out (TX), In (RX) 5 Com (Gnd) RS-/ RS-/Cat- All Reverse S witches Link Criss-Cross T x & Rx. Port A Port B Port C Sw Sw Sw Sw4 Swiches are set based WH (ada) PC/CS N/A I - I - on configuration. Cinema MII PC/CS WH (optnl) I O I I C 4 WH (ada) Aquarius N/A O - - CAT-LINK Tune Suite Aquarius WH (cat) I I O I ISO/CS PC WH (cat) O I O O N/A PC/CS WH (cat) - I I O CAT LINK WH=WH-, P C=ADA P C P rograms, CS=Control S ystem () ISO/CS=nd ISO -CAT to CS WH (cat)=long Run to W H- WH (ada)=short Run to W H- or W H- LOOP THRU ADA BUS IN OUT RJ RJ RJ RJ4 Set the & make certain that it matches that of the RJ-5 Cable (Provided with ) RJ5 Ethernet Control & Feedback Isolated Ethernet to Convertor ADA Net / Base-T VAC 5mA XFormer ISOLATION Set Jumper Pins Horizontal Position Normal ISO-E Vertical Position Reverse ISO-E extender VAC 5mA Audio Output L R Output Level WH- RJ6 RJ7 RJ8 WP (Wall Plate) Wires The Same To WP (Wall Plate) Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus Gnd Tx Rx 4V+ To Disconnect DC Connector From Pins 5 & 6 WP (Wall Plate) To wire, use /ma -WP (Wall Plate) AC 5' Cat. 5 Cable # (For Control & Audio) Connect Pins -4 & 7- Set the address correctly on both the & extender. WP (Wall Plate) Wires The Same Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus R&L Audio to Suite 6, Suite 8x8 or HTR-4 6 Do not connect the WP s DC power wires. 5' Cat. 5 Cable # (For ) Use Two Pair For Pin 5 and Two Pair For Pin 6 -WP (Wall Plate) To wire, use /ma To WP (Wall Plate) Gnd Tx Rx 4V+ To Use two pair of Cat. 5 wires for pin 5 and another pair for pin 6 (the power lines). 5' Cat 5 C July Manual Ver..

13 Install Option When installing the into a system where one Cat. 5 cable and one two-conductor wire (or combination cable) are run between the WP and the, ADA recommends wiring the four balanced audio wires and the four control wires on one Cat. 5 cable. The power should be run on the two-conductor, 8-gauge wire. When running more than s on an HTR-4, you have to plug in the power supply on the WP or. The HTR-4 does not provide enough power for more than two s. Critical Installation Notice - It is imperative that you terminate the wires correctly, pin to pin. WH- or WH-4 System Wiring Harness Cat. 5 & -Cond. Wire.NET RS- Control & Feedback To Suite 8x8, Suite 6, or HTR-4 ISO-CAT-II RS- B CTS RX TX ISO-CAT II OVER LOAD A Sw. I n = I Sw. O ut = O Out (TX), In (RX) 5 Com (Gnd) RS-/ RS-/Cat- All Reverse S witches Link Criss-Cross T x & Rx. Port A Port B Port C Sw Sw Sw Sw4 Swiches are set based WH (ada) PC/CS N/A I - I - on configuration. Cinema MII PC/CS WH (optnl) I O I I C 4 WH (ada) Aquarius N/A O - - CAT-LINK Tune Suite Aquarius WH (cat) I I O I ISO/CS PC WH (cat) O I O O N/A PC/CS WH (cat) - I I O CAT LINK WH=WH-, P C=ADA P C P rograms, CS=Control S ystem () ISO/CS=nd ISO -CAT to CS WH (cat)=long Run to W H- WH (ada)=short Run to W H- or W H- LOOP THRU ADA BUS IN OUT RJ RJ RJ RJ4 Set the & make certain that it matches that of the RJ-5 Cable (Provided with ) RJ5 Ethernet Control & Feedback Isolated Ethernet to Convertor ADA Net / Base-T VAC 5mA XFormer ISOLATION Set Jumper Pins Horizontal Position Normal ISO-E Vertical Position Reverse ISO-E extender VAC 5mA Audio Output L R Output Level WH- RJ6 RJ7 RJ8 WP (Wall Plate) Wires The Same To WP (Wall Plate) Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus Gnd Tx Rx 4V+ To Disconnect DC Connector From Pins 5 & 6 WP (Wall Plate) To wire, use /ma -WP (Wall Plate) AC 5' Cat. 5 Cable Connect Pins -4 & 7- Set the address correctly on both the & extender. WP (Wall Plate) Wires The Same To WP (Wall Plate) Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus Gnd Tx Rx 4V+ To R&L Audio to Suite 6, Suite 8x8 or HTR-4 Do not connect the WP s DC jack power wires. Conductor 8 Gauge Cable Connect Pins 5 & 6 -WP (Wall Plate) To wire, use /ma Manual Ver.. Co - - July 5

14 Install Option One Cat. 5 Cable When installing the into a system where only one Cat. 5 cable is run between the extender WP and the, wire the four balanced audio wires and the four control wires on the Cat. 5 cable. Connect a DC transformer directly to the WP (Wall Plate). Connect the transformer to the WP s front plate DC connector, connect the two wires on the back of the connector to.net pins 5 & 6. This wiring option does not power the off the. When running more than s on an HTR-4, you have to plug in the power supply on the WP or. The HTR-4 does not provide enough power for more than two s. Critical Installation Notice - It is imperative that you ter- minate the wires correctly, pin to pin. WH- or WH-4 System Wiring Harness RS- Control & Feedback Ethernet Control & Feedback ISO-CAT-II RS- B CTS RX TX ISO-CAT II OVER LOAD A Sw. I n = I Sw. O ut = O Out (TX), In (RX) 5 Com (Gnd) RS-/ RS-/Cat- All Reverse S witches Link Criss-Cross T x & Rx. Port A Port B Port C Sw Sw Sw Sw4 Swiches are set based WH (ada) PC/CS N/A I - I - on configuration. Cinema MII PC/CS WH (optnl) I O I I C 4 WH (ada) Aquarius N/A O - - CAT-LINK Tune Suite Aquarius WH (cat) I I O I ISO/CS PC WH (cat) O I O O N/A PC/CS WH (cat) - I I O CAT LINK WH=WH-, P C=ADA P C P rograms, CS=Control S ystem () ISO/CS=nd ISO -CAT to CS WH (cat)=long Run to W H- WH (ada)=short Run to W H- or W H- ADA Net / Base-T VAC 5mA XFormer To Suite 8x8, Suite 6, or HTR-4 Isolated Ethernet to Convertor ISOLATION Set Jumper Pins Horizontal Position Normal ISO-E Vertical Position Reverse ISO-E extender VAC 5mA Audio Output L R LOOP THRU ADA BUS Output Level IN WH- OUT RJ RJ RJ RJ4 RJ5 RJ6 RJ7 RJ8 WP (Wall Plate) Wires The Same To WP (Wall Plate) Set the & make certain that it matches that of the Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus Gnd Tx Rx 4V+ To ma XFormer DC Connect DC Connector To Pins 5 & 6 WP (Wall Plate) To wire, use /ma RJ-5 Cable (Provided with ) -WP (Wall Plate) Connect Pins -4 & 7- AC Set the address correctly on both the & extender. WP (Wall Plate) Wires The Same Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus R&L Audio to Suite 6, Suite 8x8 or HTR-4 Connect the WP s DC jack power wires. 6' Cat. 5 Cable -WP (Wall Plate) To wire, use /ma To WP (Wall Plate) Gnd Tx Rx 4V+ To Co July Manual Ver..

15 Install Option 4 WH- or WH-4 System Wiring Harness DC ma XFormer One Cat. 5 Cable When installing the into a system where only one Cat. 5 cable is run between the extender WP and the, wire the four balanced audio wires and the four control wires on the Cat. 5 cable. In this setup, you can connect a DC transformer directly to the. This option is ideal if the transformer cannot be easily connected to the WP.NET (wall plate). This wiring option does not power the off the. When running more than s on an HTR-4, you have to plug in the power supply on the WP or. The HTR-4 does not provide enough power for more than two s. Critical Installation Notice - It is imperative that you ter- minate the wires correctly, pin to pin. RS- Control & Feedback To Suite 8x8, Suite 6, or HTR-4 ISO-CAT-II RS- B CTS RX TX ISO-CAT II OVER LOAD A Sw. I n = I Sw. O ut = O Out (TX), In (RX) 5 Com (Gnd) RS-/ RS-/Cat- All Reverse S witches Link Criss-Cross T x & Rx. Port A Port B Port C Sw Sw Sw Sw4 Swiches are set based WH (ada) PC/CS N/A I - I - on configuration. Cinema MII PC/CS WH (optnl) I O I I C 4 WH (ada) Aquarius N/A O - - CAT-LINK Tune Suite Aquarius WH (cat) I I O I ISO/CS PC WH (cat) O I O O N/A PC/CS WH (cat) - I I O CAT LINK WH=WH-, P C=ADA P C P rograms, CS=Control S ystem () ISO/CS=nd ISO -CAT to CS WH (cat)=long Run to W H- WH (ada)=short Run to W H- or W H- LOOP THRU ADA BUS IN OUT RJ RJ RJ RJ4 Set the & make certain that it matches that of the RJ-5 Cable (Provided with ) RJ5 Ethernet Control & Feedback Isolated Ethernet to Convertor ADA Net / Base-T VAC 5mA XFormer ISOLATION Set Jumper Pins Horizontal Position Normal ISO-E Vertical Position Reverse ISO-E extender VAC 5mA Audio Output L R Output Level WH- RJ6 RJ7 RJ8 WP (Wall Plate) Wires The Same To WP (Wall Plate) Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus Gnd Tx Rx 4V+ To Disconnect DC Connector From Pins 5 & 6 WP (Wall Plate) To wire, use /ma -WP (Wall Plate) Connect Pins -4 & 7- To WP (Wall Plate) AC Set the address correctly on both the & extender. WP (Wall Plate) Wires The Same Settings Must Match Settings - 7 ADA Keypads Special CD -8 8,9,A,B Keypads & Touch Screen Sp. CD -4 C,D,E Touch Screen Only Sp. CD - F ADA Keypad Baud Bus Gnd Tx Rx 4V+ To R&L Audio to Suite 6, Suite 8x8 or HTR-4 5' Cat. 5 Cable 6 Do not connect the WP s DC jack power wires. -WP (Wall Plate) To wire, use /ma Manual Ver.. Co July 5

16 RS- Protocol Special CD Commands for IDCODE: = x5 = x5 = x5 4 = x5 5 = x54 6 = x55 7 = x56 8 = x57 FUNCTION: Shuffle Play All Songs B8,75,4E,9,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F IDCODE+: = x5 = x5 = x5 4 = x54 5 = x55 6 = x56 7 = x57 8 = x58 SPECIAL: ASCII = x ASCII = x ASCII = x ASCII = x ASCII 4 = x4 ASCII 5 = x5 ASCII 6 = x6 ASCII 7 = x7 ASCII 8 = x8 ASCII 9 = x9 ASCII. = xe ER = xa FUNCTION: Menu Up B8,75,4E,9,IDCODE,B8 FEEDBACK RECEIVED F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Menu Down B8,75,4E,9,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Play B8,75,4E,94,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Pause B8,75,4E,95,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Scan Backward B8,75,4E,9A,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Scan Forward B8,75,4E,9B,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Track Skip Down B8,75,4E,9C,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Track Skip Up B8,75,4E,9D,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Stop B8,75,4E,96,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F FUNCTION: Shuffle On/Off B8,75,4E,97,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F Touchscreen Feedback (Multi-Line Displays) COMMANDS ARE THE SAME F,6_CHARACTER_DISPLAY,IDCODE+,7,OPTIONS,,,F OPTIONS: = STATUS = ARTIST = ALBUM = TITLE (SONG) FUNCTION: Update Please note! Consider all numbers within the document to be hex values. B8,75,4E,98,IDCODE,B8 F,_CHARACTER_DISPLAY,7,IDCODE+,F July Manual Ver..